344 lines
8.6 KiB
C
344 lines
8.6 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* Texas Instruments DDR3 ECC error correction and detection driver
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/edac.h>
|
|
#include <linux/io.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/module.h>
|
|
|
|
#include "edac_module.h"
|
|
|
|
/* EMIF controller registers */
|
|
#define EMIF_SDRAM_CONFIG 0x008
|
|
#define EMIF_IRQ_STATUS 0x0ac
|
|
#define EMIF_IRQ_ENABLE_SET 0x0b4
|
|
#define EMIF_ECC_CTRL 0x110
|
|
#define EMIF_1B_ECC_ERR_CNT 0x130
|
|
#define EMIF_1B_ECC_ERR_THRSH 0x134
|
|
#define EMIF_1B_ECC_ERR_ADDR_LOG 0x13c
|
|
#define EMIF_2B_ECC_ERR_ADDR_LOG 0x140
|
|
|
|
/* Bit definitions for EMIF_SDRAM_CONFIG */
|
|
#define SDRAM_TYPE_SHIFT 29
|
|
#define SDRAM_TYPE_MASK GENMASK(31, 29)
|
|
#define SDRAM_TYPE_DDR3 (3 << SDRAM_TYPE_SHIFT)
|
|
#define SDRAM_TYPE_DDR2 (2 << SDRAM_TYPE_SHIFT)
|
|
#define SDRAM_NARROW_MODE_MASK GENMASK(15, 14)
|
|
#define SDRAM_K2_NARROW_MODE_SHIFT 12
|
|
#define SDRAM_K2_NARROW_MODE_MASK GENMASK(13, 12)
|
|
#define SDRAM_ROWSIZE_SHIFT 7
|
|
#define SDRAM_ROWSIZE_MASK GENMASK(9, 7)
|
|
#define SDRAM_IBANK_SHIFT 4
|
|
#define SDRAM_IBANK_MASK GENMASK(6, 4)
|
|
#define SDRAM_K2_IBANK_SHIFT 5
|
|
#define SDRAM_K2_IBANK_MASK GENMASK(6, 5)
|
|
#define SDRAM_K2_EBANK_SHIFT 3
|
|
#define SDRAM_K2_EBANK_MASK BIT(SDRAM_K2_EBANK_SHIFT)
|
|
#define SDRAM_PAGESIZE_SHIFT 0
|
|
#define SDRAM_PAGESIZE_MASK GENMASK(2, 0)
|
|
#define SDRAM_K2_PAGESIZE_SHIFT 0
|
|
#define SDRAM_K2_PAGESIZE_MASK GENMASK(1, 0)
|
|
|
|
#define EMIF_1B_ECC_ERR_THRSH_SHIFT 24
|
|
|
|
/* IRQ bit definitions */
|
|
#define EMIF_1B_ECC_ERR BIT(5)
|
|
#define EMIF_2B_ECC_ERR BIT(4)
|
|
#define EMIF_WR_ECC_ERR BIT(3)
|
|
#define EMIF_SYS_ERR BIT(0)
|
|
/* Bit 31 enables ECC and 28 enables RMW */
|
|
#define ECC_ENABLED (BIT(31) | BIT(28))
|
|
|
|
#define EDAC_MOD_NAME "ti-emif-edac"
|
|
|
|
enum {
|
|
EMIF_TYPE_DRA7,
|
|
EMIF_TYPE_K2
|
|
};
|
|
|
|
struct ti_edac {
|
|
void __iomem *reg;
|
|
};
|
|
|
|
static u32 ti_edac_readl(struct ti_edac *edac, u16 offset)
|
|
{
|
|
return readl_relaxed(edac->reg + offset);
|
|
}
|
|
|
|
static void ti_edac_writel(struct ti_edac *edac, u32 val, u16 offset)
|
|
{
|
|
writel_relaxed(val, edac->reg + offset);
|
|
}
|
|
|
|
static irqreturn_t ti_edac_isr(int irq, void *data)
|
|
{
|
|
struct mem_ctl_info *mci = data;
|
|
struct ti_edac *edac = mci->pvt_info;
|
|
u32 irq_status;
|
|
u32 err_addr;
|
|
int err_count;
|
|
|
|
irq_status = ti_edac_readl(edac, EMIF_IRQ_STATUS);
|
|
|
|
if (irq_status & EMIF_1B_ECC_ERR) {
|
|
err_addr = ti_edac_readl(edac, EMIF_1B_ECC_ERR_ADDR_LOG);
|
|
err_count = ti_edac_readl(edac, EMIF_1B_ECC_ERR_CNT);
|
|
ti_edac_writel(edac, err_count, EMIF_1B_ECC_ERR_CNT);
|
|
edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, err_count,
|
|
err_addr >> PAGE_SHIFT,
|
|
err_addr & ~PAGE_MASK, -1, 0, 0, 0,
|
|
mci->ctl_name, "1B");
|
|
}
|
|
|
|
if (irq_status & EMIF_2B_ECC_ERR) {
|
|
err_addr = ti_edac_readl(edac, EMIF_2B_ECC_ERR_ADDR_LOG);
|
|
edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
|
|
err_addr >> PAGE_SHIFT,
|
|
err_addr & ~PAGE_MASK, -1, 0, 0, 0,
|
|
mci->ctl_name, "2B");
|
|
}
|
|
|
|
if (irq_status & EMIF_WR_ECC_ERR)
|
|
edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
|
|
0, 0, -1, 0, 0, 0,
|
|
mci->ctl_name, "WR");
|
|
|
|
ti_edac_writel(edac, irq_status, EMIF_IRQ_STATUS);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void ti_edac_setup_dimm(struct mem_ctl_info *mci, u32 type)
|
|
{
|
|
struct dimm_info *dimm;
|
|
struct ti_edac *edac = mci->pvt_info;
|
|
int bits;
|
|
u32 val;
|
|
u32 memsize;
|
|
|
|
dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers, 0, 0, 0);
|
|
|
|
val = ti_edac_readl(edac, EMIF_SDRAM_CONFIG);
|
|
|
|
if (type == EMIF_TYPE_DRA7) {
|
|
bits = ((val & SDRAM_PAGESIZE_MASK) >> SDRAM_PAGESIZE_SHIFT) + 8;
|
|
bits += ((val & SDRAM_ROWSIZE_MASK) >> SDRAM_ROWSIZE_SHIFT) + 9;
|
|
bits += (val & SDRAM_IBANK_MASK) >> SDRAM_IBANK_SHIFT;
|
|
|
|
if (val & SDRAM_NARROW_MODE_MASK) {
|
|
bits++;
|
|
dimm->dtype = DEV_X16;
|
|
} else {
|
|
bits += 2;
|
|
dimm->dtype = DEV_X32;
|
|
}
|
|
} else {
|
|
bits = 16;
|
|
bits += ((val & SDRAM_K2_PAGESIZE_MASK) >>
|
|
SDRAM_K2_PAGESIZE_SHIFT) + 8;
|
|
bits += (val & SDRAM_K2_IBANK_MASK) >> SDRAM_K2_IBANK_SHIFT;
|
|
bits += (val & SDRAM_K2_EBANK_MASK) >> SDRAM_K2_EBANK_SHIFT;
|
|
|
|
val = (val & SDRAM_K2_NARROW_MODE_MASK) >>
|
|
SDRAM_K2_NARROW_MODE_SHIFT;
|
|
switch (val) {
|
|
case 0:
|
|
bits += 3;
|
|
dimm->dtype = DEV_X64;
|
|
break;
|
|
case 1:
|
|
bits += 2;
|
|
dimm->dtype = DEV_X32;
|
|
break;
|
|
case 2:
|
|
bits++;
|
|
dimm->dtype = DEV_X16;
|
|
break;
|
|
}
|
|
}
|
|
|
|
memsize = 1 << bits;
|
|
|
|
dimm->nr_pages = memsize >> PAGE_SHIFT;
|
|
dimm->grain = 4;
|
|
if ((val & SDRAM_TYPE_MASK) == SDRAM_TYPE_DDR2)
|
|
dimm->mtype = MEM_DDR2;
|
|
else
|
|
dimm->mtype = MEM_DDR3;
|
|
|
|
val = ti_edac_readl(edac, EMIF_ECC_CTRL);
|
|
if (val & ECC_ENABLED)
|
|
dimm->edac_mode = EDAC_SECDED;
|
|
else
|
|
dimm->edac_mode = EDAC_NONE;
|
|
}
|
|
|
|
static const struct of_device_id ti_edac_of_match[] = {
|
|
{ .compatible = "ti,emif-keystone", .data = (void *)EMIF_TYPE_K2 },
|
|
{ .compatible = "ti,emif-dra7xx", .data = (void *)EMIF_TYPE_DRA7 },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ti_edac_of_match);
|
|
|
|
static int _emif_get_id(struct device_node *node)
|
|
{
|
|
struct device_node *np;
|
|
const __be32 *addrp;
|
|
u32 addr, my_addr;
|
|
int my_id = 0;
|
|
|
|
addrp = of_get_address(node, 0, NULL, NULL);
|
|
my_addr = (u32)of_translate_address(node, addrp);
|
|
|
|
for_each_matching_node(np, ti_edac_of_match) {
|
|
if (np == node)
|
|
continue;
|
|
|
|
addrp = of_get_address(np, 0, NULL, NULL);
|
|
addr = (u32)of_translate_address(np, addrp);
|
|
|
|
edac_printk(KERN_INFO, EDAC_MOD_NAME,
|
|
"addr=%x, my_addr=%x\n",
|
|
addr, my_addr);
|
|
|
|
if (addr < my_addr)
|
|
my_id++;
|
|
}
|
|
|
|
return my_id;
|
|
}
|
|
|
|
static int ti_edac_probe(struct platform_device *pdev)
|
|
{
|
|
int error_irq = 0, ret = -ENODEV;
|
|
struct device *dev = &pdev->dev;
|
|
struct resource *res;
|
|
void __iomem *reg;
|
|
struct mem_ctl_info *mci;
|
|
struct edac_mc_layer layers[1];
|
|
const struct of_device_id *id;
|
|
struct ti_edac *edac;
|
|
int emif_id;
|
|
|
|
id = of_match_device(ti_edac_of_match, &pdev->dev);
|
|
if (!id)
|
|
return -ENODEV;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
reg = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(reg)) {
|
|
edac_printk(KERN_ERR, EDAC_MOD_NAME,
|
|
"EMIF controller regs not defined\n");
|
|
return PTR_ERR(reg);
|
|
}
|
|
|
|
layers[0].type = EDAC_MC_LAYER_ALL_MEM;
|
|
layers[0].size = 1;
|
|
|
|
/* Allocate ID number for our EMIF controller */
|
|
emif_id = _emif_get_id(pdev->dev.of_node);
|
|
if (emif_id < 0)
|
|
return -EINVAL;
|
|
|
|
mci = edac_mc_alloc(emif_id, 1, layers, sizeof(*edac));
|
|
if (!mci)
|
|
return -ENOMEM;
|
|
|
|
mci->pdev = &pdev->dev;
|
|
edac = mci->pvt_info;
|
|
edac->reg = reg;
|
|
platform_set_drvdata(pdev, mci);
|
|
|
|
mci->mtype_cap = MEM_FLAG_DDR3 | MEM_FLAG_DDR2;
|
|
mci->edac_ctl_cap = EDAC_FLAG_SECDED | EDAC_FLAG_NONE;
|
|
mci->mod_name = EDAC_MOD_NAME;
|
|
mci->ctl_name = id->compatible;
|
|
mci->dev_name = dev_name(&pdev->dev);
|
|
|
|
/* Setup memory layout */
|
|
ti_edac_setup_dimm(mci, (u32)(id->data));
|
|
|
|
/* add EMIF ECC error handler */
|
|
error_irq = platform_get_irq(pdev, 0);
|
|
if (error_irq < 0) {
|
|
ret = error_irq;
|
|
edac_printk(KERN_ERR, EDAC_MOD_NAME,
|
|
"EMIF irq number not defined.\n");
|
|
goto err;
|
|
}
|
|
|
|
ret = devm_request_irq(dev, error_irq, ti_edac_isr, 0,
|
|
"emif-edac-irq", mci);
|
|
if (ret) {
|
|
edac_printk(KERN_ERR, EDAC_MOD_NAME,
|
|
"request_irq fail for EMIF EDAC irq\n");
|
|
goto err;
|
|
}
|
|
|
|
ret = edac_mc_add_mc(mci);
|
|
if (ret) {
|
|
edac_printk(KERN_ERR, EDAC_MOD_NAME,
|
|
"Failed to register mci: %d.\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
/* Generate an interrupt with each 1b error */
|
|
ti_edac_writel(edac, 1 << EMIF_1B_ECC_ERR_THRSH_SHIFT,
|
|
EMIF_1B_ECC_ERR_THRSH);
|
|
|
|
/* Enable interrupts */
|
|
ti_edac_writel(edac,
|
|
EMIF_1B_ECC_ERR | EMIF_2B_ECC_ERR | EMIF_WR_ECC_ERR,
|
|
EMIF_IRQ_ENABLE_SET);
|
|
|
|
return 0;
|
|
|
|
err:
|
|
edac_mc_free(mci);
|
|
return ret;
|
|
}
|
|
|
|
static int ti_edac_remove(struct platform_device *pdev)
|
|
{
|
|
struct mem_ctl_info *mci = platform_get_drvdata(pdev);
|
|
|
|
edac_mc_del_mc(&pdev->dev);
|
|
edac_mc_free(mci);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver ti_edac_driver = {
|
|
.probe = ti_edac_probe,
|
|
.remove = ti_edac_remove,
|
|
.driver = {
|
|
.name = EDAC_MOD_NAME,
|
|
.of_match_table = ti_edac_of_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(ti_edac_driver);
|
|
|
|
MODULE_AUTHOR("Texas Instruments Inc.");
|
|
MODULE_DESCRIPTION("EDAC Driver for Texas Instruments DDR3 MC");
|
|
MODULE_LICENSE("GPL v2");
|