627 lines
13 KiB
C
627 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Flash memory interface rev.5 driver for the Intel
|
|
* Flash chips used on the NetWinder.
|
|
*
|
|
* 20/08/2000 RMK use __ioremap to map flash into virtual memory
|
|
* make a few more places use "volatile"
|
|
* 22/05/2001 RMK - Lock read against write
|
|
* - merge printk level changes (with mods) from Alan Cox.
|
|
* - use *ppos as the file position, not file->f_pos.
|
|
* - fix check for out of range pos and r/w size
|
|
*
|
|
* Please note that we are tampering with the only flash chip in the
|
|
* machine, which contains the bootup code. We therefore have the
|
|
* power to convert these machines into doorstops...
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/miscdevice.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/rwsem.h>
|
|
#include <linux/init.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/jiffies.h>
|
|
|
|
#include <asm/hardware/dec21285.h>
|
|
#include <asm/io.h>
|
|
#include <asm/mach-types.h>
|
|
#include <linux/uaccess.h>
|
|
|
|
/*****************************************************************************/
|
|
#include <asm/nwflash.h>
|
|
|
|
#define NWFLASH_VERSION "6.4"
|
|
|
|
static DEFINE_MUTEX(flash_mutex);
|
|
static void kick_open(void);
|
|
static int get_flash_id(void);
|
|
static int erase_block(int nBlock);
|
|
static int write_block(unsigned long p, const char __user *buf, int count);
|
|
|
|
#define KFLASH_SIZE 1024*1024 //1 Meg
|
|
#define KFLASH_SIZE4 4*1024*1024 //4 Meg
|
|
#define KFLASH_ID 0x89A6 //Intel flash
|
|
#define KFLASH_ID4 0xB0D4 //Intel flash 4Meg
|
|
|
|
static bool flashdebug; //if set - we will display progress msgs
|
|
|
|
static int gbWriteEnable;
|
|
static int gbWriteBase64Enable;
|
|
static volatile unsigned char *FLASH_BASE;
|
|
static int gbFlashSize = KFLASH_SIZE;
|
|
static DEFINE_MUTEX(nwflash_mutex);
|
|
|
|
static int get_flash_id(void)
|
|
{
|
|
volatile unsigned int c1, c2;
|
|
|
|
/*
|
|
* try to get flash chip ID
|
|
*/
|
|
kick_open();
|
|
c2 = inb(0x80);
|
|
*(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x90;
|
|
udelay(15);
|
|
c1 = *(volatile unsigned char *) FLASH_BASE;
|
|
c2 = inb(0x80);
|
|
|
|
/*
|
|
* on 4 Meg flash the second byte is actually at offset 2...
|
|
*/
|
|
if (c1 == 0xB0)
|
|
c2 = *(volatile unsigned char *) (FLASH_BASE + 2);
|
|
else
|
|
c2 = *(volatile unsigned char *) (FLASH_BASE + 1);
|
|
|
|
c2 += (c1 << 8);
|
|
|
|
/*
|
|
* set it back to read mode
|
|
*/
|
|
*(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0xFF;
|
|
|
|
if (c2 == KFLASH_ID4)
|
|
gbFlashSize = KFLASH_SIZE4;
|
|
|
|
return c2;
|
|
}
|
|
|
|
static long flash_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
|
|
{
|
|
mutex_lock(&flash_mutex);
|
|
switch (cmd) {
|
|
case CMD_WRITE_DISABLE:
|
|
gbWriteBase64Enable = 0;
|
|
gbWriteEnable = 0;
|
|
break;
|
|
|
|
case CMD_WRITE_ENABLE:
|
|
gbWriteEnable = 1;
|
|
break;
|
|
|
|
case CMD_WRITE_BASE64K_ENABLE:
|
|
gbWriteBase64Enable = 1;
|
|
break;
|
|
|
|
default:
|
|
gbWriteBase64Enable = 0;
|
|
gbWriteEnable = 0;
|
|
mutex_unlock(&flash_mutex);
|
|
return -EINVAL;
|
|
}
|
|
mutex_unlock(&flash_mutex);
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t flash_read(struct file *file, char __user *buf, size_t size,
|
|
loff_t *ppos)
|
|
{
|
|
ssize_t ret;
|
|
|
|
if (flashdebug)
|
|
printk(KERN_DEBUG "flash_read: flash_read: offset=0x%llx, "
|
|
"buffer=%p, count=0x%zx.\n", *ppos, buf, size);
|
|
/*
|
|
* We now lock against reads and writes. --rmk
|
|
*/
|
|
if (mutex_lock_interruptible(&nwflash_mutex))
|
|
return -ERESTARTSYS;
|
|
|
|
ret = simple_read_from_buffer(buf, size, ppos, (void *)FLASH_BASE, gbFlashSize);
|
|
mutex_unlock(&nwflash_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t flash_write(struct file *file, const char __user *buf,
|
|
size_t size, loff_t * ppos)
|
|
{
|
|
unsigned long p = *ppos;
|
|
unsigned int count = size;
|
|
int written;
|
|
int nBlock, temp, rc;
|
|
int i, j;
|
|
|
|
if (flashdebug)
|
|
printk("flash_write: offset=0x%lX, buffer=0x%p, count=0x%X.\n",
|
|
p, buf, count);
|
|
|
|
if (!gbWriteEnable)
|
|
return -EINVAL;
|
|
|
|
if (p < 64 * 1024 && (!gbWriteBase64Enable))
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* check for out of range pos or count
|
|
*/
|
|
if (p >= gbFlashSize)
|
|
return count ? -ENXIO : 0;
|
|
|
|
if (count > gbFlashSize - p)
|
|
count = gbFlashSize - p;
|
|
|
|
if (!access_ok(buf, count))
|
|
return -EFAULT;
|
|
|
|
/*
|
|
* We now lock against reads and writes. --rmk
|
|
*/
|
|
if (mutex_lock_interruptible(&nwflash_mutex))
|
|
return -ERESTARTSYS;
|
|
|
|
written = 0;
|
|
|
|
nBlock = (int) p >> 16; //block # of 64K bytes
|
|
|
|
/*
|
|
* # of 64K blocks to erase and write
|
|
*/
|
|
temp = ((int) (p + count) >> 16) - nBlock + 1;
|
|
|
|
/*
|
|
* write ends at exactly 64k boundary?
|
|
*/
|
|
if (((int) (p + count) & 0xFFFF) == 0)
|
|
temp -= 1;
|
|
|
|
if (flashdebug)
|
|
printk(KERN_DEBUG "flash_write: writing %d block(s) "
|
|
"starting at %d.\n", temp, nBlock);
|
|
|
|
for (; temp; temp--, nBlock++) {
|
|
if (flashdebug)
|
|
printk(KERN_DEBUG "flash_write: erasing block %d.\n", nBlock);
|
|
|
|
/*
|
|
* first we have to erase the block(s), where we will write...
|
|
*/
|
|
i = 0;
|
|
j = 0;
|
|
RetryBlock:
|
|
do {
|
|
rc = erase_block(nBlock);
|
|
i++;
|
|
} while (rc && i < 10);
|
|
|
|
if (rc) {
|
|
printk(KERN_ERR "flash_write: erase error %x\n", rc);
|
|
break;
|
|
}
|
|
if (flashdebug)
|
|
printk(KERN_DEBUG "flash_write: writing offset %lX, "
|
|
"from buf %p, bytes left %X.\n", p, buf,
|
|
count - written);
|
|
|
|
/*
|
|
* write_block will limit write to space left in this block
|
|
*/
|
|
rc = write_block(p, buf, count - written);
|
|
j++;
|
|
|
|
/*
|
|
* if somehow write verify failed? Can't happen??
|
|
*/
|
|
if (!rc) {
|
|
/*
|
|
* retry up to 10 times
|
|
*/
|
|
if (j < 10)
|
|
goto RetryBlock;
|
|
else
|
|
/*
|
|
* else quit with error...
|
|
*/
|
|
rc = -1;
|
|
|
|
}
|
|
if (rc < 0) {
|
|
printk(KERN_ERR "flash_write: write error %X\n", rc);
|
|
break;
|
|
}
|
|
p += rc;
|
|
buf += rc;
|
|
written += rc;
|
|
*ppos += rc;
|
|
|
|
if (flashdebug)
|
|
printk(KERN_DEBUG "flash_write: written 0x%X bytes OK.\n", written);
|
|
}
|
|
|
|
mutex_unlock(&nwflash_mutex);
|
|
|
|
return written;
|
|
}
|
|
|
|
|
|
/*
|
|
* The memory devices use the full 32/64 bits of the offset, and so we cannot
|
|
* check against negative addresses: they are ok. The return value is weird,
|
|
* though, in that case (0).
|
|
*
|
|
* also note that seeking relative to the "end of file" isn't supported:
|
|
* it has no meaning, so it returns -EINVAL.
|
|
*/
|
|
static loff_t flash_llseek(struct file *file, loff_t offset, int orig)
|
|
{
|
|
loff_t ret;
|
|
|
|
mutex_lock(&flash_mutex);
|
|
if (flashdebug)
|
|
printk(KERN_DEBUG "flash_llseek: offset=0x%X, orig=0x%X.\n",
|
|
(unsigned int) offset, orig);
|
|
|
|
ret = no_seek_end_llseek_size(file, offset, orig, gbFlashSize);
|
|
mutex_unlock(&flash_mutex);
|
|
return ret;
|
|
}
|
|
|
|
|
|
/*
|
|
* assume that main Write routine did the parameter checking...
|
|
* so just go ahead and erase, what requested!
|
|
*/
|
|
|
|
static int erase_block(int nBlock)
|
|
{
|
|
volatile unsigned int c1;
|
|
volatile unsigned char *pWritePtr;
|
|
unsigned long timeout;
|
|
int temp, temp1;
|
|
|
|
/*
|
|
* reset footbridge to the correct offset 0 (...0..3)
|
|
*/
|
|
*CSR_ROMWRITEREG = 0;
|
|
|
|
/*
|
|
* dummy ROM read
|
|
*/
|
|
c1 = *(volatile unsigned char *) (FLASH_BASE + 0x8000);
|
|
|
|
kick_open();
|
|
/*
|
|
* reset status if old errors
|
|
*/
|
|
*(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x50;
|
|
|
|
/*
|
|
* erase a block...
|
|
* aim at the middle of a current block...
|
|
*/
|
|
pWritePtr = (unsigned char *) ((unsigned int) (FLASH_BASE + 0x8000 + (nBlock << 16)));
|
|
/*
|
|
* dummy read
|
|
*/
|
|
c1 = *pWritePtr;
|
|
|
|
kick_open();
|
|
/*
|
|
* erase
|
|
*/
|
|
*(volatile unsigned char *) pWritePtr = 0x20;
|
|
|
|
/*
|
|
* confirm
|
|
*/
|
|
*(volatile unsigned char *) pWritePtr = 0xD0;
|
|
|
|
/*
|
|
* wait 10 ms
|
|
*/
|
|
msleep(10);
|
|
|
|
/*
|
|
* wait while erasing in process (up to 10 sec)
|
|
*/
|
|
timeout = jiffies + 10 * HZ;
|
|
c1 = 0;
|
|
while (!(c1 & 0x80) && time_before(jiffies, timeout)) {
|
|
msleep(10);
|
|
/*
|
|
* read any address
|
|
*/
|
|
c1 = *(volatile unsigned char *) (pWritePtr);
|
|
// printk("Flash_erase: status=%X.\n",c1);
|
|
}
|
|
|
|
/*
|
|
* set flash for normal read access
|
|
*/
|
|
kick_open();
|
|
// *(volatile unsigned char*)(FLASH_BASE+0x8000) = 0xFF;
|
|
*(volatile unsigned char *) pWritePtr = 0xFF; //back to normal operation
|
|
|
|
/*
|
|
* check if erase errors were reported
|
|
*/
|
|
if (c1 & 0x20) {
|
|
printk(KERN_ERR "flash_erase: err at %p\n", pWritePtr);
|
|
|
|
/*
|
|
* reset error
|
|
*/
|
|
*(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x50;
|
|
return -2;
|
|
}
|
|
|
|
/*
|
|
* just to make sure - verify if erased OK...
|
|
*/
|
|
msleep(10);
|
|
|
|
pWritePtr = (unsigned char *) ((unsigned int) (FLASH_BASE + (nBlock << 16)));
|
|
|
|
for (temp = 0; temp < 16 * 1024; temp++, pWritePtr += 4) {
|
|
if ((temp1 = *(volatile unsigned int *) pWritePtr) != 0xFFFFFFFF) {
|
|
printk(KERN_ERR "flash_erase: verify err at %p = %X\n",
|
|
pWritePtr, temp1);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
/*
|
|
* write_block will limit number of bytes written to the space in this block
|
|
*/
|
|
static int write_block(unsigned long p, const char __user *buf, int count)
|
|
{
|
|
volatile unsigned int c1;
|
|
volatile unsigned int c2;
|
|
unsigned char *pWritePtr;
|
|
unsigned int uAddress;
|
|
unsigned int offset;
|
|
unsigned long timeout;
|
|
unsigned long timeout1;
|
|
|
|
pWritePtr = (unsigned char *) ((unsigned int) (FLASH_BASE + p));
|
|
|
|
/*
|
|
* check if write will end in this block....
|
|
*/
|
|
offset = p & 0xFFFF;
|
|
|
|
if (offset + count > 0x10000)
|
|
count = 0x10000 - offset;
|
|
|
|
/*
|
|
* wait up to 30 sec for this block
|
|
*/
|
|
timeout = jiffies + 30 * HZ;
|
|
|
|
for (offset = 0; offset < count; offset++, pWritePtr++) {
|
|
uAddress = (unsigned int) pWritePtr;
|
|
uAddress &= 0xFFFFFFFC;
|
|
if (__get_user(c2, buf + offset))
|
|
return -EFAULT;
|
|
|
|
WriteRetry:
|
|
/*
|
|
* dummy read
|
|
*/
|
|
c1 = *(volatile unsigned char *) (FLASH_BASE + 0x8000);
|
|
|
|
/*
|
|
* kick open the write gate
|
|
*/
|
|
kick_open();
|
|
|
|
/*
|
|
* program footbridge to the correct offset...0..3
|
|
*/
|
|
*CSR_ROMWRITEREG = (unsigned int) pWritePtr & 3;
|
|
|
|
/*
|
|
* write cmd
|
|
*/
|
|
*(volatile unsigned char *) (uAddress) = 0x40;
|
|
|
|
/*
|
|
* data to write
|
|
*/
|
|
*(volatile unsigned char *) (uAddress) = c2;
|
|
|
|
/*
|
|
* get status
|
|
*/
|
|
*(volatile unsigned char *) (FLASH_BASE + 0x10000) = 0x70;
|
|
|
|
c1 = 0;
|
|
|
|
/*
|
|
* wait up to 1 sec for this byte
|
|
*/
|
|
timeout1 = jiffies + 1 * HZ;
|
|
|
|
/*
|
|
* while not ready...
|
|
*/
|
|
while (!(c1 & 0x80) && time_before(jiffies, timeout1))
|
|
c1 = *(volatile unsigned char *) (FLASH_BASE + 0x8000);
|
|
|
|
/*
|
|
* if timeout getting status
|
|
*/
|
|
if (time_after_eq(jiffies, timeout1)) {
|
|
kick_open();
|
|
/*
|
|
* reset err
|
|
*/
|
|
*(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x50;
|
|
|
|
goto WriteRetry;
|
|
}
|
|
/*
|
|
* switch on read access, as a default flash operation mode
|
|
*/
|
|
kick_open();
|
|
/*
|
|
* read access
|
|
*/
|
|
*(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0xFF;
|
|
|
|
/*
|
|
* if hardware reports an error writing, and not timeout -
|
|
* reset the chip and retry
|
|
*/
|
|
if (c1 & 0x10) {
|
|
kick_open();
|
|
/*
|
|
* reset err
|
|
*/
|
|
*(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x50;
|
|
|
|
/*
|
|
* before timeout?
|
|
*/
|
|
if (time_before(jiffies, timeout)) {
|
|
if (flashdebug)
|
|
printk(KERN_DEBUG "write_block: Retrying write at 0x%X)n",
|
|
pWritePtr - FLASH_BASE);
|
|
|
|
/*
|
|
* wait couple ms
|
|
*/
|
|
msleep(10);
|
|
|
|
goto WriteRetry;
|
|
} else {
|
|
printk(KERN_ERR "write_block: timeout at 0x%X\n",
|
|
pWritePtr - FLASH_BASE);
|
|
/*
|
|
* return error -2
|
|
*/
|
|
return -2;
|
|
|
|
}
|
|
}
|
|
}
|
|
|
|
msleep(10);
|
|
|
|
pWritePtr = (unsigned char *) ((unsigned int) (FLASH_BASE + p));
|
|
|
|
for (offset = 0; offset < count; offset++) {
|
|
char c, c1;
|
|
if (__get_user(c, buf))
|
|
return -EFAULT;
|
|
buf++;
|
|
if ((c1 = *pWritePtr++) != c) {
|
|
printk(KERN_ERR "write_block: verify error at 0x%X (%02X!=%02X)\n",
|
|
pWritePtr - FLASH_BASE, c1, c);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
|
|
static void kick_open(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
/*
|
|
* we want to write a bit pattern XXX1 to Xilinx to enable
|
|
* the write gate, which will be open for about the next 2ms.
|
|
*/
|
|
raw_spin_lock_irqsave(&nw_gpio_lock, flags);
|
|
nw_cpld_modify(CPLD_FLASH_WR_ENABLE, CPLD_FLASH_WR_ENABLE);
|
|
raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
|
|
|
|
/*
|
|
* let the ISA bus to catch on...
|
|
*/
|
|
udelay(25);
|
|
}
|
|
|
|
static const struct file_operations flash_fops =
|
|
{
|
|
.owner = THIS_MODULE,
|
|
.llseek = flash_llseek,
|
|
.read = flash_read,
|
|
.write = flash_write,
|
|
.unlocked_ioctl = flash_ioctl,
|
|
};
|
|
|
|
static struct miscdevice flash_miscdev =
|
|
{
|
|
FLASH_MINOR,
|
|
"nwflash",
|
|
&flash_fops
|
|
};
|
|
|
|
static int __init nwflash_init(void)
|
|
{
|
|
int ret = -ENODEV;
|
|
|
|
if (machine_is_netwinder()) {
|
|
int id;
|
|
|
|
FLASH_BASE = ioremap(DC21285_FLASH, KFLASH_SIZE4);
|
|
if (!FLASH_BASE)
|
|
goto out;
|
|
|
|
id = get_flash_id();
|
|
if ((id != KFLASH_ID) && (id != KFLASH_ID4)) {
|
|
ret = -ENXIO;
|
|
iounmap((void *)FLASH_BASE);
|
|
printk("Flash: incorrect ID 0x%04X.\n", id);
|
|
goto out;
|
|
}
|
|
|
|
printk("Flash ROM driver v.%s, flash device ID 0x%04X, size %d Mb.\n",
|
|
NWFLASH_VERSION, id, gbFlashSize / (1024 * 1024));
|
|
|
|
ret = misc_register(&flash_miscdev);
|
|
if (ret < 0) {
|
|
iounmap((void *)FLASH_BASE);
|
|
}
|
|
}
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static void __exit nwflash_exit(void)
|
|
{
|
|
misc_deregister(&flash_miscdev);
|
|
iounmap((void *)FLASH_BASE);
|
|
}
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_param(flashdebug, bool, 0644);
|
|
|
|
module_init(nwflash_init);
|
|
module_exit(nwflash_exit);
|