338 lines
7.6 KiB
C
338 lines
7.6 KiB
C
/*
|
|
* PCF8563 RTC
|
|
*
|
|
* From Phillips' datasheet:
|
|
*
|
|
* The PCF8563 is a CMOS real-time clock/calendar optimized for low power
|
|
* consumption. A programmable clock output, interupt output and voltage
|
|
* low detector are also provided. All address and data are transferred
|
|
* serially via two-line bidirectional I2C-bus. Maximum bus speed is
|
|
* 400 kbits/s. The built-in word address register is incremented
|
|
* automatically after each written or read byte.
|
|
*
|
|
* Copyright (c) 2002-2003, Axis Communications AB
|
|
* All rights reserved.
|
|
*
|
|
* Author: Tobias Anderberg <tobiasa@axis.com>.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/init.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/ioctl.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/bcd.h>
|
|
|
|
#include <asm/uaccess.h>
|
|
#include <asm/system.h>
|
|
#include <asm/io.h>
|
|
#include <asm/rtc.h>
|
|
|
|
#include "i2c.h"
|
|
|
|
#define PCF8563_MAJOR 121 /* Local major number. */
|
|
#define DEVICE_NAME "rtc" /* Name which is registered in /proc/devices. */
|
|
#define PCF8563_NAME "PCF8563"
|
|
#define DRIVER_VERSION "$Revision: 1.1 $"
|
|
|
|
/* Two simple wrapper macros, saves a few keystrokes. */
|
|
#define rtc_read(x) i2c_readreg(RTC_I2C_READ, x)
|
|
#define rtc_write(x,y) i2c_writereg(RTC_I2C_WRITE, x, y)
|
|
|
|
static const unsigned char days_in_month[] =
|
|
{ 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
|
|
|
|
int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
|
|
int pcf8563_open(struct inode *, struct file *);
|
|
int pcf8563_release(struct inode *, struct file *);
|
|
|
|
static const struct file_operations pcf8563_fops = {
|
|
owner: THIS_MODULE,
|
|
ioctl: pcf8563_ioctl,
|
|
open: pcf8563_open,
|
|
release: pcf8563_release,
|
|
};
|
|
|
|
unsigned char
|
|
pcf8563_readreg(int reg)
|
|
{
|
|
unsigned char res = rtc_read(reg);
|
|
|
|
/* The PCF8563 does not return 0 for unimplemented bits */
|
|
switch (reg) {
|
|
case RTC_SECONDS:
|
|
case RTC_MINUTES:
|
|
res &= 0x7F;
|
|
break;
|
|
case RTC_HOURS:
|
|
case RTC_DAY_OF_MONTH:
|
|
res &= 0x3F;
|
|
break;
|
|
case RTC_WEEKDAY:
|
|
res &= 0x07;
|
|
break;
|
|
case RTC_MONTH:
|
|
res &= 0x1F;
|
|
break;
|
|
case RTC_CONTROL1:
|
|
res &= 0xA8;
|
|
break;
|
|
case RTC_CONTROL2:
|
|
res &= 0x1F;
|
|
break;
|
|
case RTC_CLOCKOUT_FREQ:
|
|
case RTC_TIMER_CONTROL:
|
|
res &= 0x83;
|
|
break;
|
|
}
|
|
return res;
|
|
}
|
|
|
|
void
|
|
pcf8563_writereg(int reg, unsigned char val)
|
|
{
|
|
#ifdef CONFIG_ETRAX_RTC_READONLY
|
|
if (reg == RTC_CONTROL1 || (reg >= RTC_SECONDS && reg <= RTC_YEAR))
|
|
return;
|
|
#endif
|
|
|
|
rtc_write(reg, val);
|
|
}
|
|
|
|
void
|
|
get_rtc_time(struct rtc_time *tm)
|
|
{
|
|
tm->tm_sec = rtc_read(RTC_SECONDS);
|
|
tm->tm_min = rtc_read(RTC_MINUTES);
|
|
tm->tm_hour = rtc_read(RTC_HOURS);
|
|
tm->tm_mday = rtc_read(RTC_DAY_OF_MONTH);
|
|
tm->tm_wday = rtc_read(RTC_WEEKDAY);
|
|
tm->tm_mon = rtc_read(RTC_MONTH);
|
|
tm->tm_year = rtc_read(RTC_YEAR);
|
|
|
|
if (tm->tm_sec & 0x80)
|
|
printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time "
|
|
"information is no longer guaranteed!\n", PCF8563_NAME);
|
|
|
|
tm->tm_year = BCD_TO_BIN(tm->tm_year) + ((tm->tm_mon & 0x80) ? 100 : 0);
|
|
tm->tm_sec &= 0x7F;
|
|
tm->tm_min &= 0x7F;
|
|
tm->tm_hour &= 0x3F;
|
|
tm->tm_mday &= 0x3F;
|
|
tm->tm_wday &= 0x07; /* Not coded in BCD. */
|
|
tm->tm_mon &= 0x1F;
|
|
|
|
BCD_TO_BIN(tm->tm_sec);
|
|
BCD_TO_BIN(tm->tm_min);
|
|
BCD_TO_BIN(tm->tm_hour);
|
|
BCD_TO_BIN(tm->tm_mday);
|
|
BCD_TO_BIN(tm->tm_mon);
|
|
tm->tm_mon--; /* Month is 1..12 in RTC but 0..11 in linux */
|
|
}
|
|
|
|
int __init
|
|
pcf8563_init(void)
|
|
{
|
|
/* Initiate the i2c protocol. */
|
|
i2c_init();
|
|
|
|
/*
|
|
* First of all we need to reset the chip. This is done by
|
|
* clearing control1, control2 and clk freq and resetting
|
|
* all alarms.
|
|
*/
|
|
if (rtc_write(RTC_CONTROL1, 0x00) < 0)
|
|
goto err;
|
|
|
|
if (rtc_write(RTC_CONTROL2, 0x00) < 0)
|
|
goto err;
|
|
|
|
if (rtc_write(RTC_CLOCKOUT_FREQ, 0x00) < 0)
|
|
goto err;
|
|
|
|
if (rtc_write(RTC_TIMER_CONTROL, 0x03) < 0)
|
|
goto err;
|
|
|
|
/* Reset the alarms. */
|
|
if (rtc_write(RTC_MINUTE_ALARM, 0x80) < 0)
|
|
goto err;
|
|
|
|
if (rtc_write(RTC_HOUR_ALARM, 0x80) < 0)
|
|
goto err;
|
|
|
|
if (rtc_write(RTC_DAY_ALARM, 0x80) < 0)
|
|
goto err;
|
|
|
|
if (rtc_write(RTC_WEEKDAY_ALARM, 0x80) < 0)
|
|
goto err;
|
|
|
|
if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) {
|
|
printk(KERN_INFO "%s: Unable to get major number %d for RTC device.\n",
|
|
PCF8563_NAME, PCF8563_MAJOR);
|
|
return -1;
|
|
}
|
|
|
|
printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME, DRIVER_VERSION);
|
|
|
|
/* Check for low voltage, and warn about it.. */
|
|
if (rtc_read(RTC_SECONDS) & 0x80)
|
|
printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time "
|
|
"information is no longer guaranteed!\n", PCF8563_NAME);
|
|
|
|
return 0;
|
|
|
|
err:
|
|
printk(KERN_INFO "%s: Error initializing chip.\n", PCF8563_NAME);
|
|
return -1;
|
|
}
|
|
|
|
void __exit
|
|
pcf8563_exit(void)
|
|
{
|
|
if (unregister_chrdev(PCF8563_MAJOR, DEVICE_NAME) < 0) {
|
|
printk(KERN_INFO "%s: Unable to unregister device.\n", PCF8563_NAME);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* ioctl calls for this driver. Why return -ENOTTY upon error? Because
|
|
* POSIX says so!
|
|
*/
|
|
int
|
|
pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg)
|
|
{
|
|
/* Some sanity checks. */
|
|
if (_IOC_TYPE(cmd) != RTC_MAGIC)
|
|
return -ENOTTY;
|
|
|
|
if (_IOC_NR(cmd) > RTC_MAX_IOCTL)
|
|
return -ENOTTY;
|
|
|
|
switch (cmd) {
|
|
case RTC_RD_TIME:
|
|
{
|
|
struct rtc_time tm;
|
|
|
|
memset(&tm, 0, sizeof (struct rtc_time));
|
|
get_rtc_time(&tm);
|
|
|
|
if (copy_to_user((struct rtc_time *) arg, &tm, sizeof tm)) {
|
|
return -EFAULT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
case RTC_SET_TIME:
|
|
{
|
|
#ifdef CONFIG_ETRAX_RTC_READONLY
|
|
return -EPERM;
|
|
#else
|
|
int leap;
|
|
int year;
|
|
int century;
|
|
struct rtc_time tm;
|
|
|
|
if (!capable(CAP_SYS_TIME))
|
|
return -EPERM;
|
|
|
|
if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof tm))
|
|
return -EFAULT;
|
|
|
|
/* Convert from struct tm to struct rtc_time. */
|
|
tm.tm_year += 1900;
|
|
tm.tm_mon += 1;
|
|
|
|
/*
|
|
* Check if tm.tm_year is a leap year. A year is a leap
|
|
* year if it is divisible by 4 but not 100, except
|
|
* that years divisible by 400 _are_ leap years.
|
|
*/
|
|
year = tm.tm_year;
|
|
leap = (tm.tm_mon == 2) && ((year % 4 == 0 && year % 100 != 0) || year % 400 == 0);
|
|
|
|
/* Perform some sanity checks. */
|
|
if ((tm.tm_year < 1970) ||
|
|
(tm.tm_mon > 12) ||
|
|
(tm.tm_mday == 0) ||
|
|
(tm.tm_mday > days_in_month[tm.tm_mon] + leap) ||
|
|
(tm.tm_wday >= 7) ||
|
|
(tm.tm_hour >= 24) ||
|
|
(tm.tm_min >= 60) ||
|
|
(tm.tm_sec >= 60))
|
|
return -EINVAL;
|
|
|
|
century = (tm.tm_year >= 2000) ? 0x80 : 0;
|
|
tm.tm_year = tm.tm_year % 100;
|
|
|
|
BIN_TO_BCD(tm.tm_year);
|
|
BIN_TO_BCD(tm.tm_mday);
|
|
BIN_TO_BCD(tm.tm_hour);
|
|
BIN_TO_BCD(tm.tm_min);
|
|
BIN_TO_BCD(tm.tm_sec);
|
|
tm.tm_mon |= century;
|
|
|
|
rtc_write(RTC_YEAR, tm.tm_year);
|
|
rtc_write(RTC_MONTH, tm.tm_mon);
|
|
rtc_write(RTC_WEEKDAY, tm.tm_wday); /* Not coded in BCD. */
|
|
rtc_write(RTC_DAY_OF_MONTH, tm.tm_mday);
|
|
rtc_write(RTC_HOURS, tm.tm_hour);
|
|
rtc_write(RTC_MINUTES, tm.tm_min);
|
|
rtc_write(RTC_SECONDS, tm.tm_sec);
|
|
|
|
return 0;
|
|
#endif /* !CONFIG_ETRAX_RTC_READONLY */
|
|
}
|
|
|
|
case RTC_VLOW_RD:
|
|
{
|
|
int vl_bit = 0;
|
|
|
|
if (rtc_read(RTC_SECONDS) & 0x80) {
|
|
vl_bit = 1;
|
|
printk(KERN_WARNING "%s: RTC Voltage Low - reliable "
|
|
"date/time information is no longer guaranteed!\n",
|
|
PCF8563_NAME);
|
|
}
|
|
if (copy_to_user((int *) arg, &vl_bit, sizeof(int)))
|
|
return -EFAULT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
case RTC_VLOW_SET:
|
|
{
|
|
/* Clear the VL bit in the seconds register */
|
|
int ret = rtc_read(RTC_SECONDS);
|
|
|
|
rtc_write(RTC_SECONDS, (ret & 0x7F));
|
|
|
|
return 0;
|
|
}
|
|
|
|
default:
|
|
return -ENOTTY;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
pcf8563_open(struct inode *inode, struct file *filp)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
pcf8563_release(struct inode *inode, struct file *filp)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
module_init(pcf8563_init);
|
|
module_exit(pcf8563_exit);
|