511 lines
14 KiB
C
511 lines
14 KiB
C
/*
|
|
* STMicroelectronics pressures driver
|
|
*
|
|
* Copyright 2013 STMicroelectronics Inc.
|
|
*
|
|
* Denis Ciocca <denis.ciocca@st.com>
|
|
*
|
|
* Licensed under the GPL-2.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/types.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/trigger.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
#include <linux/iio/common/st_sensors.h>
|
|
#include "st_pressure.h"
|
|
|
|
#define ST_PRESS_LSB_PER_MBAR 4096UL
|
|
#define ST_PRESS_KPASCAL_NANO_SCALE (100000000UL / \
|
|
ST_PRESS_LSB_PER_MBAR)
|
|
#define ST_PRESS_LSB_PER_CELSIUS 480UL
|
|
#define ST_PRESS_CELSIUS_NANO_SCALE (1000000000UL / \
|
|
ST_PRESS_LSB_PER_CELSIUS)
|
|
#define ST_PRESS_NUMBER_DATA_CHANNELS 1
|
|
|
|
/* FULLSCALE */
|
|
#define ST_PRESS_FS_AVL_1260MB 1260
|
|
|
|
#define ST_PRESS_1_OUT_XL_ADDR 0x28
|
|
#define ST_TEMP_1_OUT_L_ADDR 0x2b
|
|
|
|
/* CUSTOM VALUES FOR LPS331AP SENSOR */
|
|
#define ST_PRESS_LPS331AP_WAI_EXP 0xbb
|
|
#define ST_PRESS_LPS331AP_ODR_ADDR 0x20
|
|
#define ST_PRESS_LPS331AP_ODR_MASK 0x70
|
|
#define ST_PRESS_LPS331AP_ODR_AVL_1HZ_VAL 0x01
|
|
#define ST_PRESS_LPS331AP_ODR_AVL_7HZ_VAL 0x05
|
|
#define ST_PRESS_LPS331AP_ODR_AVL_13HZ_VAL 0x06
|
|
#define ST_PRESS_LPS331AP_ODR_AVL_25HZ_VAL 0x07
|
|
#define ST_PRESS_LPS331AP_PW_ADDR 0x20
|
|
#define ST_PRESS_LPS331AP_PW_MASK 0x80
|
|
#define ST_PRESS_LPS331AP_FS_ADDR 0x23
|
|
#define ST_PRESS_LPS331AP_FS_MASK 0x30
|
|
#define ST_PRESS_LPS331AP_FS_AVL_1260_VAL 0x00
|
|
#define ST_PRESS_LPS331AP_FS_AVL_1260_GAIN ST_PRESS_KPASCAL_NANO_SCALE
|
|
#define ST_PRESS_LPS331AP_FS_AVL_TEMP_GAIN ST_PRESS_CELSIUS_NANO_SCALE
|
|
#define ST_PRESS_LPS331AP_BDU_ADDR 0x20
|
|
#define ST_PRESS_LPS331AP_BDU_MASK 0x04
|
|
#define ST_PRESS_LPS331AP_DRDY_IRQ_ADDR 0x22
|
|
#define ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK 0x04
|
|
#define ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK 0x20
|
|
#define ST_PRESS_LPS331AP_IHL_IRQ_ADDR 0x22
|
|
#define ST_PRESS_LPS331AP_IHL_IRQ_MASK 0x80
|
|
#define ST_PRESS_LPS331AP_MULTIREAD_BIT true
|
|
#define ST_PRESS_LPS331AP_TEMP_OFFSET 42500
|
|
|
|
/* CUSTOM VALUES FOR LPS001WP SENSOR */
|
|
#define ST_PRESS_LPS001WP_WAI_EXP 0xba
|
|
#define ST_PRESS_LPS001WP_ODR_ADDR 0x20
|
|
#define ST_PRESS_LPS001WP_ODR_MASK 0x30
|
|
#define ST_PRESS_LPS001WP_ODR_AVL_1HZ_VAL 0x01
|
|
#define ST_PRESS_LPS001WP_ODR_AVL_7HZ_VAL 0x02
|
|
#define ST_PRESS_LPS001WP_ODR_AVL_13HZ_VAL 0x03
|
|
#define ST_PRESS_LPS001WP_PW_ADDR 0x20
|
|
#define ST_PRESS_LPS001WP_PW_MASK 0x40
|
|
#define ST_PRESS_LPS001WP_BDU_ADDR 0x20
|
|
#define ST_PRESS_LPS001WP_BDU_MASK 0x04
|
|
#define ST_PRESS_LPS001WP_MULTIREAD_BIT true
|
|
#define ST_PRESS_LPS001WP_OUT_L_ADDR 0x28
|
|
#define ST_TEMP_LPS001WP_OUT_L_ADDR 0x2a
|
|
|
|
/* CUSTOM VALUES FOR LPS25H SENSOR */
|
|
#define ST_PRESS_LPS25H_WAI_EXP 0xbd
|
|
#define ST_PRESS_LPS25H_ODR_ADDR 0x20
|
|
#define ST_PRESS_LPS25H_ODR_MASK 0x70
|
|
#define ST_PRESS_LPS25H_ODR_AVL_1HZ_VAL 0x01
|
|
#define ST_PRESS_LPS25H_ODR_AVL_7HZ_VAL 0x02
|
|
#define ST_PRESS_LPS25H_ODR_AVL_13HZ_VAL 0x03
|
|
#define ST_PRESS_LPS25H_ODR_AVL_25HZ_VAL 0x04
|
|
#define ST_PRESS_LPS25H_PW_ADDR 0x20
|
|
#define ST_PRESS_LPS25H_PW_MASK 0x80
|
|
#define ST_PRESS_LPS25H_FS_ADDR 0x00
|
|
#define ST_PRESS_LPS25H_FS_MASK 0x00
|
|
#define ST_PRESS_LPS25H_FS_AVL_1260_VAL 0x00
|
|
#define ST_PRESS_LPS25H_FS_AVL_1260_GAIN ST_PRESS_KPASCAL_NANO_SCALE
|
|
#define ST_PRESS_LPS25H_FS_AVL_TEMP_GAIN ST_PRESS_CELSIUS_NANO_SCALE
|
|
#define ST_PRESS_LPS25H_BDU_ADDR 0x20
|
|
#define ST_PRESS_LPS25H_BDU_MASK 0x04
|
|
#define ST_PRESS_LPS25H_DRDY_IRQ_ADDR 0x23
|
|
#define ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK 0x01
|
|
#define ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK 0x10
|
|
#define ST_PRESS_LPS25H_IHL_IRQ_ADDR 0x22
|
|
#define ST_PRESS_LPS25H_IHL_IRQ_MASK 0x80
|
|
#define ST_PRESS_LPS25H_MULTIREAD_BIT true
|
|
#define ST_PRESS_LPS25H_TEMP_OFFSET 42500
|
|
#define ST_PRESS_LPS25H_OUT_XL_ADDR 0x28
|
|
#define ST_TEMP_LPS25H_OUT_L_ADDR 0x2b
|
|
|
|
static const struct iio_chan_spec st_press_1_channels[] = {
|
|
{
|
|
.type = IIO_PRESSURE,
|
|
.channel2 = IIO_NO_MOD,
|
|
.address = ST_PRESS_1_OUT_XL_ADDR,
|
|
.scan_index = ST_SENSORS_SCAN_X,
|
|
.scan_type = {
|
|
.sign = 'u',
|
|
.realbits = 24,
|
|
.storagebits = 24,
|
|
.endianness = IIO_LE,
|
|
},
|
|
.info_mask_separate =
|
|
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
|
|
.modified = 0,
|
|
},
|
|
{
|
|
.type = IIO_TEMP,
|
|
.channel2 = IIO_NO_MOD,
|
|
.address = ST_TEMP_1_OUT_L_ADDR,
|
|
.scan_index = -1,
|
|
.scan_type = {
|
|
.sign = 'u',
|
|
.realbits = 16,
|
|
.storagebits = 16,
|
|
.endianness = IIO_LE,
|
|
},
|
|
.info_mask_separate =
|
|
BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_SCALE) |
|
|
BIT(IIO_CHAN_INFO_OFFSET),
|
|
.modified = 0,
|
|
},
|
|
IIO_CHAN_SOFT_TIMESTAMP(1)
|
|
};
|
|
|
|
static const struct iio_chan_spec st_press_lps001wp_channels[] = {
|
|
{
|
|
.type = IIO_PRESSURE,
|
|
.channel2 = IIO_NO_MOD,
|
|
.address = ST_PRESS_LPS001WP_OUT_L_ADDR,
|
|
.scan_index = ST_SENSORS_SCAN_X,
|
|
.scan_type = {
|
|
.sign = 'u',
|
|
.realbits = 16,
|
|
.storagebits = 16,
|
|
.endianness = IIO_LE,
|
|
},
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
|
|
.modified = 0,
|
|
},
|
|
{
|
|
.type = IIO_TEMP,
|
|
.channel2 = IIO_NO_MOD,
|
|
.address = ST_TEMP_LPS001WP_OUT_L_ADDR,
|
|
.scan_index = -1,
|
|
.scan_type = {
|
|
.sign = 'u',
|
|
.realbits = 16,
|
|
.storagebits = 16,
|
|
.endianness = IIO_LE,
|
|
},
|
|
.info_mask_separate =
|
|
BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_OFFSET),
|
|
.modified = 0,
|
|
},
|
|
IIO_CHAN_SOFT_TIMESTAMP(1)
|
|
};
|
|
|
|
static const struct st_sensor_settings st_press_sensors_settings[] = {
|
|
{
|
|
.wai = ST_PRESS_LPS331AP_WAI_EXP,
|
|
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
|
|
.sensors_supported = {
|
|
[0] = LPS331AP_PRESS_DEV_NAME,
|
|
},
|
|
.ch = (struct iio_chan_spec *)st_press_1_channels,
|
|
.num_ch = ARRAY_SIZE(st_press_1_channels),
|
|
.odr = {
|
|
.addr = ST_PRESS_LPS331AP_ODR_ADDR,
|
|
.mask = ST_PRESS_LPS331AP_ODR_MASK,
|
|
.odr_avl = {
|
|
{ 1, ST_PRESS_LPS331AP_ODR_AVL_1HZ_VAL, },
|
|
{ 7, ST_PRESS_LPS331AP_ODR_AVL_7HZ_VAL, },
|
|
{ 13, ST_PRESS_LPS331AP_ODR_AVL_13HZ_VAL, },
|
|
{ 25, ST_PRESS_LPS331AP_ODR_AVL_25HZ_VAL, },
|
|
},
|
|
},
|
|
.pw = {
|
|
.addr = ST_PRESS_LPS331AP_PW_ADDR,
|
|
.mask = ST_PRESS_LPS331AP_PW_MASK,
|
|
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
|
|
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
|
|
},
|
|
.fs = {
|
|
.addr = ST_PRESS_LPS331AP_FS_ADDR,
|
|
.mask = ST_PRESS_LPS331AP_FS_MASK,
|
|
.fs_avl = {
|
|
[0] = {
|
|
.num = ST_PRESS_FS_AVL_1260MB,
|
|
.value = ST_PRESS_LPS331AP_FS_AVL_1260_VAL,
|
|
.gain = ST_PRESS_LPS331AP_FS_AVL_1260_GAIN,
|
|
.gain2 = ST_PRESS_LPS331AP_FS_AVL_TEMP_GAIN,
|
|
},
|
|
},
|
|
},
|
|
.bdu = {
|
|
.addr = ST_PRESS_LPS331AP_BDU_ADDR,
|
|
.mask = ST_PRESS_LPS331AP_BDU_MASK,
|
|
},
|
|
.drdy_irq = {
|
|
.addr = ST_PRESS_LPS331AP_DRDY_IRQ_ADDR,
|
|
.mask_int1 = ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK,
|
|
.mask_int2 = ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK,
|
|
.addr_ihl = ST_PRESS_LPS331AP_IHL_IRQ_ADDR,
|
|
.mask_ihl = ST_PRESS_LPS331AP_IHL_IRQ_MASK,
|
|
},
|
|
.multi_read_bit = ST_PRESS_LPS331AP_MULTIREAD_BIT,
|
|
.bootime = 2,
|
|
},
|
|
{
|
|
.wai = ST_PRESS_LPS001WP_WAI_EXP,
|
|
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
|
|
.sensors_supported = {
|
|
[0] = LPS001WP_PRESS_DEV_NAME,
|
|
},
|
|
.ch = (struct iio_chan_spec *)st_press_lps001wp_channels,
|
|
.num_ch = ARRAY_SIZE(st_press_lps001wp_channels),
|
|
.odr = {
|
|
.addr = ST_PRESS_LPS001WP_ODR_ADDR,
|
|
.mask = ST_PRESS_LPS001WP_ODR_MASK,
|
|
.odr_avl = {
|
|
{ 1, ST_PRESS_LPS001WP_ODR_AVL_1HZ_VAL, },
|
|
{ 7, ST_PRESS_LPS001WP_ODR_AVL_7HZ_VAL, },
|
|
{ 13, ST_PRESS_LPS001WP_ODR_AVL_13HZ_VAL, },
|
|
},
|
|
},
|
|
.pw = {
|
|
.addr = ST_PRESS_LPS001WP_PW_ADDR,
|
|
.mask = ST_PRESS_LPS001WP_PW_MASK,
|
|
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
|
|
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
|
|
},
|
|
.fs = {
|
|
.addr = 0,
|
|
},
|
|
.bdu = {
|
|
.addr = ST_PRESS_LPS001WP_BDU_ADDR,
|
|
.mask = ST_PRESS_LPS001WP_BDU_MASK,
|
|
},
|
|
.drdy_irq = {
|
|
.addr = 0,
|
|
},
|
|
.multi_read_bit = ST_PRESS_LPS001WP_MULTIREAD_BIT,
|
|
.bootime = 2,
|
|
},
|
|
{
|
|
.wai = ST_PRESS_LPS25H_WAI_EXP,
|
|
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
|
|
.sensors_supported = {
|
|
[0] = LPS25H_PRESS_DEV_NAME,
|
|
},
|
|
.ch = (struct iio_chan_spec *)st_press_1_channels,
|
|
.num_ch = ARRAY_SIZE(st_press_1_channels),
|
|
.odr = {
|
|
.addr = ST_PRESS_LPS25H_ODR_ADDR,
|
|
.mask = ST_PRESS_LPS25H_ODR_MASK,
|
|
.odr_avl = {
|
|
{ 1, ST_PRESS_LPS25H_ODR_AVL_1HZ_VAL, },
|
|
{ 7, ST_PRESS_LPS25H_ODR_AVL_7HZ_VAL, },
|
|
{ 13, ST_PRESS_LPS25H_ODR_AVL_13HZ_VAL, },
|
|
{ 25, ST_PRESS_LPS25H_ODR_AVL_25HZ_VAL, },
|
|
},
|
|
},
|
|
.pw = {
|
|
.addr = ST_PRESS_LPS25H_PW_ADDR,
|
|
.mask = ST_PRESS_LPS25H_PW_MASK,
|
|
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
|
|
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
|
|
},
|
|
.fs = {
|
|
.addr = ST_PRESS_LPS25H_FS_ADDR,
|
|
.mask = ST_PRESS_LPS25H_FS_MASK,
|
|
.fs_avl = {
|
|
[0] = {
|
|
.num = ST_PRESS_FS_AVL_1260MB,
|
|
.value = ST_PRESS_LPS25H_FS_AVL_1260_VAL,
|
|
.gain = ST_PRESS_LPS25H_FS_AVL_1260_GAIN,
|
|
.gain2 = ST_PRESS_LPS25H_FS_AVL_TEMP_GAIN,
|
|
},
|
|
},
|
|
},
|
|
.bdu = {
|
|
.addr = ST_PRESS_LPS25H_BDU_ADDR,
|
|
.mask = ST_PRESS_LPS25H_BDU_MASK,
|
|
},
|
|
.drdy_irq = {
|
|
.addr = ST_PRESS_LPS25H_DRDY_IRQ_ADDR,
|
|
.mask_int1 = ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK,
|
|
.mask_int2 = ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK,
|
|
.addr_ihl = ST_PRESS_LPS25H_IHL_IRQ_ADDR,
|
|
.mask_ihl = ST_PRESS_LPS25H_IHL_IRQ_MASK,
|
|
},
|
|
.multi_read_bit = ST_PRESS_LPS25H_MULTIREAD_BIT,
|
|
.bootime = 2,
|
|
},
|
|
};
|
|
|
|
static int st_press_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *ch,
|
|
int val,
|
|
int val2,
|
|
long mask)
|
|
{
|
|
int err;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
if (val2)
|
|
return -EINVAL;
|
|
mutex_lock(&indio_dev->mlock);
|
|
err = st_sensors_set_odr(indio_dev, val);
|
|
mutex_unlock(&indio_dev->mlock);
|
|
return err;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int st_press_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *ch, int *val,
|
|
int *val2, long mask)
|
|
{
|
|
int err;
|
|
struct st_sensor_data *press_data = iio_priv(indio_dev);
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
err = st_sensors_read_info_raw(indio_dev, ch, val);
|
|
if (err < 0)
|
|
goto read_error;
|
|
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
*val = 0;
|
|
|
|
switch (ch->type) {
|
|
case IIO_PRESSURE:
|
|
*val2 = press_data->current_fullscale->gain;
|
|
break;
|
|
case IIO_TEMP:
|
|
*val2 = press_data->current_fullscale->gain2;
|
|
break;
|
|
default:
|
|
err = -EINVAL;
|
|
goto read_error;
|
|
}
|
|
|
|
return IIO_VAL_INT_PLUS_NANO;
|
|
case IIO_CHAN_INFO_OFFSET:
|
|
switch (ch->type) {
|
|
case IIO_TEMP:
|
|
*val = 425;
|
|
*val2 = 10;
|
|
break;
|
|
default:
|
|
err = -EINVAL;
|
|
goto read_error;
|
|
}
|
|
|
|
return IIO_VAL_FRACTIONAL;
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
*val = press_data->odr;
|
|
return IIO_VAL_INT;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
read_error:
|
|
return err;
|
|
}
|
|
|
|
static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL();
|
|
|
|
static struct attribute *st_press_attributes[] = {
|
|
&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group st_press_attribute_group = {
|
|
.attrs = st_press_attributes,
|
|
};
|
|
|
|
static const struct iio_info press_info = {
|
|
.driver_module = THIS_MODULE,
|
|
.attrs = &st_press_attribute_group,
|
|
.read_raw = &st_press_read_raw,
|
|
.write_raw = &st_press_write_raw,
|
|
.debugfs_reg_access = &st_sensors_debugfs_reg_access,
|
|
};
|
|
|
|
#ifdef CONFIG_IIO_TRIGGER
|
|
static const struct iio_trigger_ops st_press_trigger_ops = {
|
|
.owner = THIS_MODULE,
|
|
.set_trigger_state = ST_PRESS_TRIGGER_SET_STATE,
|
|
};
|
|
#define ST_PRESS_TRIGGER_OPS (&st_press_trigger_ops)
|
|
#else
|
|
#define ST_PRESS_TRIGGER_OPS NULL
|
|
#endif
|
|
|
|
int st_press_common_probe(struct iio_dev *indio_dev)
|
|
{
|
|
struct st_sensor_data *press_data = iio_priv(indio_dev);
|
|
int irq = press_data->get_irq_data_ready(indio_dev);
|
|
int err;
|
|
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->info = &press_info;
|
|
mutex_init(&press_data->tb.buf_lock);
|
|
|
|
st_sensors_power_enable(indio_dev);
|
|
|
|
err = st_sensors_check_device_support(indio_dev,
|
|
ARRAY_SIZE(st_press_sensors_settings),
|
|
st_press_sensors_settings);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
press_data->num_data_channels = ST_PRESS_NUMBER_DATA_CHANNELS;
|
|
press_data->multiread_bit = press_data->sensor_settings->multi_read_bit;
|
|
indio_dev->channels = press_data->sensor_settings->ch;
|
|
indio_dev->num_channels = press_data->sensor_settings->num_ch;
|
|
|
|
if (press_data->sensor_settings->fs.addr != 0)
|
|
press_data->current_fullscale =
|
|
(struct st_sensor_fullscale_avl *)
|
|
&press_data->sensor_settings->fs.fs_avl[0];
|
|
|
|
press_data->odr = press_data->sensor_settings->odr.odr_avl[0].hz;
|
|
|
|
/* Some devices don't support a data ready pin. */
|
|
if (!press_data->dev->platform_data &&
|
|
press_data->sensor_settings->drdy_irq.addr)
|
|
press_data->dev->platform_data =
|
|
(struct st_sensors_platform_data *)&default_press_pdata;
|
|
|
|
err = st_sensors_init_sensor(indio_dev, press_data->dev->platform_data);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = st_press_allocate_ring(indio_dev);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
if (irq > 0) {
|
|
err = st_sensors_allocate_trigger(indio_dev,
|
|
ST_PRESS_TRIGGER_OPS);
|
|
if (err < 0)
|
|
goto st_press_probe_trigger_error;
|
|
}
|
|
|
|
err = iio_device_register(indio_dev);
|
|
if (err)
|
|
goto st_press_device_register_error;
|
|
|
|
dev_info(&indio_dev->dev, "registered pressure sensor %s\n",
|
|
indio_dev->name);
|
|
|
|
return err;
|
|
|
|
st_press_device_register_error:
|
|
if (irq > 0)
|
|
st_sensors_deallocate_trigger(indio_dev);
|
|
st_press_probe_trigger_error:
|
|
st_press_deallocate_ring(indio_dev);
|
|
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL(st_press_common_probe);
|
|
|
|
void st_press_common_remove(struct iio_dev *indio_dev)
|
|
{
|
|
struct st_sensor_data *press_data = iio_priv(indio_dev);
|
|
|
|
st_sensors_power_disable(indio_dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
if (press_data->get_irq_data_ready(indio_dev) > 0)
|
|
st_sensors_deallocate_trigger(indio_dev);
|
|
|
|
st_press_deallocate_ring(indio_dev);
|
|
}
|
|
EXPORT_SYMBOL(st_press_common_remove);
|
|
|
|
MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
|
|
MODULE_DESCRIPTION("STMicroelectronics pressures driver");
|
|
MODULE_LICENSE("GPL v2");
|