Kamal Dasu 9d2ee0a60b mtd: nand: brcmnand: Check flash #WP pin status before nand erase/program ... On brcmnand controller v6.x and v7.x, the #WP pin is controlled through the NAND_WP bit in CS_SELECT register. The driver currently assumes that toggling the #WP pin is instantaneously enabling/disabling write-protection, but it actually takes some time to propagate the new state to the internal NAND chip logic. This behavior is sometime causing data corruptions when an erase/program operation is executed before write-protection has really been disabled. Fixes: 27c5b17cd1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>		2017-04-25 14:18:42 +02:00
..
Makefile	mtd: brcmnand: Add support for the BCM6368	2015-12-09 18:28:42 -08:00
bcm6368_nand.c	mtd: brcmnand: defer to devm_ioremap_resource() for error checking	2015-12-10 13:08:08 -08:00
bcm63138_nand.c	mtd: brcmnand: refactor bcm63138 SoC layering	2015-09-30 13:07:01 -07:00
brcmnand.c	mtd: nand: brcmnand: Check flash #WP pin status before nand erase/program	2017-04-25 14:18:42 +02:00
brcmnand.h	mtd: brcmnand: iProc big endian and ONFI support	2016-09-23 09:35:16 +02:00
brcmstb_nand.c	mtd: brcmnand: add support for STB chips	2015-05-15 13:16:44 -07:00
iproc_nand.c	mtd: brcmnand: iProc big endian and ONFI support	2016-09-23 09:35:16 +02:00