485 lines
13 KiB
C
485 lines
13 KiB
C
/*
|
|
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* Amit Daniel Kachhap <amit.daniel@samsung.com>
|
|
*
|
|
* EXYNOS5440 - CPU frequency scaling support
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/cpu.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/opp.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* Register definitions */
|
|
#define XMU_DVFS_CTRL 0x0060
|
|
#define XMU_PMU_P0_7 0x0064
|
|
#define XMU_C0_3_PSTATE 0x0090
|
|
#define XMU_P_LIMIT 0x00a0
|
|
#define XMU_P_STATUS 0x00a4
|
|
#define XMU_PMUEVTEN 0x00d0
|
|
#define XMU_PMUIRQEN 0x00d4
|
|
#define XMU_PMUIRQ 0x00d8
|
|
|
|
/* PMU mask and shift definations */
|
|
#define P_VALUE_MASK 0x7
|
|
|
|
#define XMU_DVFS_CTRL_EN_SHIFT 0
|
|
|
|
#define P0_7_CPUCLKDEV_SHIFT 21
|
|
#define P0_7_CPUCLKDEV_MASK 0x7
|
|
#define P0_7_ATBCLKDEV_SHIFT 18
|
|
#define P0_7_ATBCLKDEV_MASK 0x7
|
|
#define P0_7_CSCLKDEV_SHIFT 15
|
|
#define P0_7_CSCLKDEV_MASK 0x7
|
|
#define P0_7_CPUEMA_SHIFT 28
|
|
#define P0_7_CPUEMA_MASK 0xf
|
|
#define P0_7_L2EMA_SHIFT 24
|
|
#define P0_7_L2EMA_MASK 0xf
|
|
#define P0_7_VDD_SHIFT 8
|
|
#define P0_7_VDD_MASK 0x7f
|
|
#define P0_7_FREQ_SHIFT 0
|
|
#define P0_7_FREQ_MASK 0xff
|
|
|
|
#define C0_3_PSTATE_VALID_SHIFT 8
|
|
#define C0_3_PSTATE_CURR_SHIFT 4
|
|
#define C0_3_PSTATE_NEW_SHIFT 0
|
|
|
|
#define PSTATE_CHANGED_EVTEN_SHIFT 0
|
|
|
|
#define PSTATE_CHANGED_IRQEN_SHIFT 0
|
|
|
|
#define PSTATE_CHANGED_SHIFT 0
|
|
|
|
/* some constant values for clock divider calculation */
|
|
#define CPU_DIV_FREQ_MAX 500
|
|
#define CPU_DBG_FREQ_MAX 375
|
|
#define CPU_ATB_FREQ_MAX 500
|
|
|
|
#define PMIC_LOW_VOLT 0x30
|
|
#define PMIC_HIGH_VOLT 0x28
|
|
|
|
#define CPUEMA_HIGH 0x2
|
|
#define CPUEMA_MID 0x4
|
|
#define CPUEMA_LOW 0x7
|
|
|
|
#define L2EMA_HIGH 0x1
|
|
#define L2EMA_MID 0x3
|
|
#define L2EMA_LOW 0x4
|
|
|
|
#define DIV_TAB_MAX 2
|
|
/* frequency unit is 20MHZ */
|
|
#define FREQ_UNIT 20
|
|
#define MAX_VOLTAGE 1550000 /* In microvolt */
|
|
#define VOLTAGE_STEP 12500 /* In microvolt */
|
|
|
|
#define CPUFREQ_NAME "exynos5440_dvfs"
|
|
#define DEF_TRANS_LATENCY 100000
|
|
|
|
enum cpufreq_level_index {
|
|
L0, L1, L2, L3, L4,
|
|
L5, L6, L7, L8, L9,
|
|
};
|
|
#define CPUFREQ_LEVEL_END (L7 + 1)
|
|
|
|
struct exynos_dvfs_data {
|
|
void __iomem *base;
|
|
struct resource *mem;
|
|
int irq;
|
|
struct clk *cpu_clk;
|
|
unsigned int cur_frequency;
|
|
unsigned int latency;
|
|
struct cpufreq_frequency_table *freq_table;
|
|
unsigned int freq_count;
|
|
struct device *dev;
|
|
bool dvfs_enabled;
|
|
struct work_struct irq_work;
|
|
};
|
|
|
|
static struct exynos_dvfs_data *dvfs_info;
|
|
static DEFINE_MUTEX(cpufreq_lock);
|
|
static struct cpufreq_freqs freqs;
|
|
|
|
static int init_div_table(void)
|
|
{
|
|
struct cpufreq_frequency_table *freq_tbl = dvfs_info->freq_table;
|
|
unsigned int tmp, clk_div, ema_div, freq, volt_id;
|
|
int i = 0;
|
|
struct opp *opp;
|
|
|
|
rcu_read_lock();
|
|
for (i = 0; freq_tbl[i].frequency != CPUFREQ_TABLE_END; i++) {
|
|
|
|
opp = opp_find_freq_exact(dvfs_info->dev,
|
|
freq_tbl[i].frequency * 1000, true);
|
|
if (IS_ERR(opp)) {
|
|
rcu_read_unlock();
|
|
dev_err(dvfs_info->dev,
|
|
"failed to find valid OPP for %u KHZ\n",
|
|
freq_tbl[i].frequency);
|
|
return PTR_ERR(opp);
|
|
}
|
|
|
|
freq = freq_tbl[i].frequency / 1000; /* In MHZ */
|
|
clk_div = ((freq / CPU_DIV_FREQ_MAX) & P0_7_CPUCLKDEV_MASK)
|
|
<< P0_7_CPUCLKDEV_SHIFT;
|
|
clk_div |= ((freq / CPU_ATB_FREQ_MAX) & P0_7_ATBCLKDEV_MASK)
|
|
<< P0_7_ATBCLKDEV_SHIFT;
|
|
clk_div |= ((freq / CPU_DBG_FREQ_MAX) & P0_7_CSCLKDEV_MASK)
|
|
<< P0_7_CSCLKDEV_SHIFT;
|
|
|
|
/* Calculate EMA */
|
|
volt_id = opp_get_voltage(opp);
|
|
volt_id = (MAX_VOLTAGE - volt_id) / VOLTAGE_STEP;
|
|
if (volt_id < PMIC_HIGH_VOLT) {
|
|
ema_div = (CPUEMA_HIGH << P0_7_CPUEMA_SHIFT) |
|
|
(L2EMA_HIGH << P0_7_L2EMA_SHIFT);
|
|
} else if (volt_id > PMIC_LOW_VOLT) {
|
|
ema_div = (CPUEMA_LOW << P0_7_CPUEMA_SHIFT) |
|
|
(L2EMA_LOW << P0_7_L2EMA_SHIFT);
|
|
} else {
|
|
ema_div = (CPUEMA_MID << P0_7_CPUEMA_SHIFT) |
|
|
(L2EMA_MID << P0_7_L2EMA_SHIFT);
|
|
}
|
|
|
|
tmp = (clk_div | ema_div | (volt_id << P0_7_VDD_SHIFT)
|
|
| ((freq / FREQ_UNIT) << P0_7_FREQ_SHIFT));
|
|
|
|
__raw_writel(tmp, dvfs_info->base + XMU_PMU_P0_7 + 4 * i);
|
|
}
|
|
|
|
rcu_read_unlock();
|
|
return 0;
|
|
}
|
|
|
|
static void exynos_enable_dvfs(void)
|
|
{
|
|
unsigned int tmp, i, cpu;
|
|
struct cpufreq_frequency_table *freq_table = dvfs_info->freq_table;
|
|
/* Disable DVFS */
|
|
__raw_writel(0, dvfs_info->base + XMU_DVFS_CTRL);
|
|
|
|
/* Enable PSTATE Change Event */
|
|
tmp = __raw_readl(dvfs_info->base + XMU_PMUEVTEN);
|
|
tmp |= (1 << PSTATE_CHANGED_EVTEN_SHIFT);
|
|
__raw_writel(tmp, dvfs_info->base + XMU_PMUEVTEN);
|
|
|
|
/* Enable PSTATE Change IRQ */
|
|
tmp = __raw_readl(dvfs_info->base + XMU_PMUIRQEN);
|
|
tmp |= (1 << PSTATE_CHANGED_IRQEN_SHIFT);
|
|
__raw_writel(tmp, dvfs_info->base + XMU_PMUIRQEN);
|
|
|
|
/* Set initial performance index */
|
|
for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++)
|
|
if (freq_table[i].frequency == dvfs_info->cur_frequency)
|
|
break;
|
|
|
|
if (freq_table[i].frequency == CPUFREQ_TABLE_END) {
|
|
dev_crit(dvfs_info->dev, "Boot up frequency not supported\n");
|
|
/* Assign the highest frequency */
|
|
i = 0;
|
|
dvfs_info->cur_frequency = freq_table[i].frequency;
|
|
}
|
|
|
|
dev_info(dvfs_info->dev, "Setting dvfs initial frequency = %uKHZ",
|
|
dvfs_info->cur_frequency);
|
|
|
|
for (cpu = 0; cpu < CONFIG_NR_CPUS; cpu++) {
|
|
tmp = __raw_readl(dvfs_info->base + XMU_C0_3_PSTATE + cpu * 4);
|
|
tmp &= ~(P_VALUE_MASK << C0_3_PSTATE_NEW_SHIFT);
|
|
tmp |= (i << C0_3_PSTATE_NEW_SHIFT);
|
|
__raw_writel(tmp, dvfs_info->base + XMU_C0_3_PSTATE + cpu * 4);
|
|
}
|
|
|
|
/* Enable DVFS */
|
|
__raw_writel(1 << XMU_DVFS_CTRL_EN_SHIFT,
|
|
dvfs_info->base + XMU_DVFS_CTRL);
|
|
}
|
|
|
|
static int exynos_verify_speed(struct cpufreq_policy *policy)
|
|
{
|
|
return cpufreq_frequency_table_verify(policy,
|
|
dvfs_info->freq_table);
|
|
}
|
|
|
|
static unsigned int exynos_getspeed(unsigned int cpu)
|
|
{
|
|
return dvfs_info->cur_frequency;
|
|
}
|
|
|
|
static int exynos_target(struct cpufreq_policy *policy,
|
|
unsigned int target_freq,
|
|
unsigned int relation)
|
|
{
|
|
unsigned int index, tmp;
|
|
int ret = 0, i;
|
|
struct cpufreq_frequency_table *freq_table = dvfs_info->freq_table;
|
|
|
|
mutex_lock(&cpufreq_lock);
|
|
|
|
ret = cpufreq_frequency_table_target(policy, freq_table,
|
|
target_freq, relation, &index);
|
|
if (ret)
|
|
goto out;
|
|
|
|
freqs.old = dvfs_info->cur_frequency;
|
|
freqs.new = freq_table[index].frequency;
|
|
|
|
if (freqs.old == freqs.new)
|
|
goto out;
|
|
|
|
cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
|
|
|
|
/* Set the target frequency in all C0_3_PSTATE register */
|
|
for_each_cpu(i, policy->cpus) {
|
|
tmp = __raw_readl(dvfs_info->base + XMU_C0_3_PSTATE + i * 4);
|
|
tmp &= ~(P_VALUE_MASK << C0_3_PSTATE_NEW_SHIFT);
|
|
tmp |= (index << C0_3_PSTATE_NEW_SHIFT);
|
|
|
|
__raw_writel(tmp, dvfs_info->base + XMU_C0_3_PSTATE + i * 4);
|
|
}
|
|
out:
|
|
mutex_unlock(&cpufreq_lock);
|
|
return ret;
|
|
}
|
|
|
|
static void exynos_cpufreq_work(struct work_struct *work)
|
|
{
|
|
unsigned int cur_pstate, index;
|
|
struct cpufreq_policy *policy = cpufreq_cpu_get(0); /* boot CPU */
|
|
struct cpufreq_frequency_table *freq_table = dvfs_info->freq_table;
|
|
|
|
/* Ensure we can access cpufreq structures */
|
|
if (unlikely(dvfs_info->dvfs_enabled == false))
|
|
goto skip_work;
|
|
|
|
mutex_lock(&cpufreq_lock);
|
|
freqs.old = dvfs_info->cur_frequency;
|
|
|
|
cur_pstate = __raw_readl(dvfs_info->base + XMU_P_STATUS);
|
|
if (cur_pstate >> C0_3_PSTATE_VALID_SHIFT & 0x1)
|
|
index = (cur_pstate >> C0_3_PSTATE_CURR_SHIFT) & P_VALUE_MASK;
|
|
else
|
|
index = (cur_pstate >> C0_3_PSTATE_NEW_SHIFT) & P_VALUE_MASK;
|
|
|
|
if (likely(index < dvfs_info->freq_count)) {
|
|
freqs.new = freq_table[index].frequency;
|
|
dvfs_info->cur_frequency = freqs.new;
|
|
} else {
|
|
dev_crit(dvfs_info->dev, "New frequency out of range\n");
|
|
freqs.new = dvfs_info->cur_frequency;
|
|
}
|
|
cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
|
|
|
|
cpufreq_cpu_put(policy);
|
|
mutex_unlock(&cpufreq_lock);
|
|
skip_work:
|
|
enable_irq(dvfs_info->irq);
|
|
}
|
|
|
|
static irqreturn_t exynos_cpufreq_irq(int irq, void *id)
|
|
{
|
|
unsigned int tmp;
|
|
|
|
tmp = __raw_readl(dvfs_info->base + XMU_PMUIRQ);
|
|
if (tmp >> PSTATE_CHANGED_SHIFT & 0x1) {
|
|
__raw_writel(tmp, dvfs_info->base + XMU_PMUIRQ);
|
|
disable_irq_nosync(irq);
|
|
schedule_work(&dvfs_info->irq_work);
|
|
}
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void exynos_sort_descend_freq_table(void)
|
|
{
|
|
struct cpufreq_frequency_table *freq_tbl = dvfs_info->freq_table;
|
|
int i = 0, index;
|
|
unsigned int tmp_freq;
|
|
/*
|
|
* Exynos5440 clock controller state logic expects the cpufreq table to
|
|
* be in descending order. But the OPP library constructs the table in
|
|
* ascending order. So to make the table descending we just need to
|
|
* swap the i element with the N - i element.
|
|
*/
|
|
for (i = 0; i < dvfs_info->freq_count / 2; i++) {
|
|
index = dvfs_info->freq_count - i - 1;
|
|
tmp_freq = freq_tbl[i].frequency;
|
|
freq_tbl[i].frequency = freq_tbl[index].frequency;
|
|
freq_tbl[index].frequency = tmp_freq;
|
|
}
|
|
}
|
|
|
|
static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy)
|
|
{
|
|
int ret;
|
|
|
|
ret = cpufreq_frequency_table_cpuinfo(policy, dvfs_info->freq_table);
|
|
if (ret) {
|
|
dev_err(dvfs_info->dev, "Invalid frequency table: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
policy->cur = dvfs_info->cur_frequency;
|
|
policy->cpuinfo.transition_latency = dvfs_info->latency;
|
|
cpumask_setall(policy->cpus);
|
|
|
|
cpufreq_frequency_table_get_attr(dvfs_info->freq_table, policy->cpu);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct cpufreq_driver exynos_driver = {
|
|
.flags = CPUFREQ_STICKY,
|
|
.verify = exynos_verify_speed,
|
|
.target = exynos_target,
|
|
.get = exynos_getspeed,
|
|
.init = exynos_cpufreq_cpu_init,
|
|
.name = CPUFREQ_NAME,
|
|
};
|
|
|
|
static const struct of_device_id exynos_cpufreq_match[] = {
|
|
{
|
|
.compatible = "samsung,exynos5440-cpufreq",
|
|
},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, exynos_cpufreq_match);
|
|
|
|
static int exynos_cpufreq_probe(struct platform_device *pdev)
|
|
{
|
|
int ret = -EINVAL;
|
|
struct device_node *np;
|
|
struct resource res;
|
|
|
|
np = pdev->dev.of_node;
|
|
if (!np)
|
|
return -ENODEV;
|
|
|
|
dvfs_info = devm_kzalloc(&pdev->dev, sizeof(*dvfs_info), GFP_KERNEL);
|
|
if (!dvfs_info) {
|
|
ret = -ENOMEM;
|
|
goto err_put_node;
|
|
}
|
|
|
|
dvfs_info->dev = &pdev->dev;
|
|
|
|
ret = of_address_to_resource(np, 0, &res);
|
|
if (ret)
|
|
goto err_put_node;
|
|
|
|
dvfs_info->base = devm_ioremap_resource(dvfs_info->dev, &res);
|
|
if (IS_ERR(dvfs_info->base)) {
|
|
ret = PTR_ERR(dvfs_info->base);
|
|
goto err_put_node;
|
|
}
|
|
|
|
dvfs_info->irq = irq_of_parse_and_map(np, 0);
|
|
if (!dvfs_info->irq) {
|
|
dev_err(dvfs_info->dev, "No cpufreq irq found\n");
|
|
ret = -ENODEV;
|
|
goto err_put_node;
|
|
}
|
|
|
|
ret = of_init_opp_table(dvfs_info->dev);
|
|
if (ret) {
|
|
dev_err(dvfs_info->dev, "failed to init OPP table: %d\n", ret);
|
|
goto err_put_node;
|
|
}
|
|
|
|
ret = opp_init_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table);
|
|
if (ret) {
|
|
dev_err(dvfs_info->dev,
|
|
"failed to init cpufreq table: %d\n", ret);
|
|
goto err_put_node;
|
|
}
|
|
dvfs_info->freq_count = opp_get_opp_count(dvfs_info->dev);
|
|
exynos_sort_descend_freq_table();
|
|
|
|
if (of_property_read_u32(np, "clock-latency", &dvfs_info->latency))
|
|
dvfs_info->latency = DEF_TRANS_LATENCY;
|
|
|
|
dvfs_info->cpu_clk = devm_clk_get(dvfs_info->dev, "armclk");
|
|
if (IS_ERR(dvfs_info->cpu_clk)) {
|
|
dev_err(dvfs_info->dev, "Failed to get cpu clock\n");
|
|
ret = PTR_ERR(dvfs_info->cpu_clk);
|
|
goto err_free_table;
|
|
}
|
|
|
|
dvfs_info->cur_frequency = clk_get_rate(dvfs_info->cpu_clk);
|
|
if (!dvfs_info->cur_frequency) {
|
|
dev_err(dvfs_info->dev, "Failed to get clock rate\n");
|
|
ret = -EINVAL;
|
|
goto err_free_table;
|
|
}
|
|
dvfs_info->cur_frequency /= 1000;
|
|
|
|
INIT_WORK(&dvfs_info->irq_work, exynos_cpufreq_work);
|
|
ret = devm_request_irq(dvfs_info->dev, dvfs_info->irq,
|
|
exynos_cpufreq_irq, IRQF_TRIGGER_NONE,
|
|
CPUFREQ_NAME, dvfs_info);
|
|
if (ret) {
|
|
dev_err(dvfs_info->dev, "Failed to register IRQ\n");
|
|
goto err_free_table;
|
|
}
|
|
|
|
ret = init_div_table();
|
|
if (ret) {
|
|
dev_err(dvfs_info->dev, "Failed to initialise div table\n");
|
|
goto err_free_table;
|
|
}
|
|
|
|
exynos_enable_dvfs();
|
|
ret = cpufreq_register_driver(&exynos_driver);
|
|
if (ret) {
|
|
dev_err(dvfs_info->dev,
|
|
"%s: failed to register cpufreq driver\n", __func__);
|
|
goto err_free_table;
|
|
}
|
|
|
|
of_node_put(np);
|
|
dvfs_info->dvfs_enabled = true;
|
|
return 0;
|
|
|
|
err_free_table:
|
|
opp_free_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table);
|
|
err_put_node:
|
|
of_node_put(np);
|
|
dev_err(&pdev->dev, "%s: failed initialization\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
static int exynos_cpufreq_remove(struct platform_device *pdev)
|
|
{
|
|
cpufreq_unregister_driver(&exynos_driver);
|
|
opp_free_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver exynos_cpufreq_platdrv = {
|
|
.driver = {
|
|
.name = "exynos5440-cpufreq",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = exynos_cpufreq_match,
|
|
},
|
|
.probe = exynos_cpufreq_probe,
|
|
.remove = exynos_cpufreq_remove,
|
|
};
|
|
module_platform_driver(exynos_cpufreq_platdrv);
|
|
|
|
MODULE_AUTHOR("Amit Daniel Kachhap <amit.daniel@samsung.com>");
|
|
MODULE_DESCRIPTION("Exynos5440 cpufreq driver");
|
|
MODULE_LICENSE("GPL");
|