45 lines
1.6 KiB
Plaintext
45 lines
1.6 KiB
Plaintext
OMAP Timer bindings
|
|
|
|
Required properties:
|
|
- compatible: Should be set to one of the below. Please note that
|
|
OMAP44xx devices have timer instances that are 100%
|
|
register compatible with OMAP3xxx devices as well as
|
|
newer timers that are not 100% register compatible.
|
|
So for OMAP44xx devices timer instances may use
|
|
different compatible strings.
|
|
|
|
ti,omap2420-timer (applicable to OMAP24xx devices)
|
|
ti,omap3430-timer (applicable to OMAP3xxx/44xx devices)
|
|
ti,omap4430-timer (applicable to OMAP44xx devices)
|
|
ti,omap5430-timer (applicable to OMAP543x devices)
|
|
ti,am335x-timer (applicable to AM335x devices)
|
|
ti,am335x-timer-1ms (applicable to AM335x devices)
|
|
|
|
- reg: Contains timer register address range (base address and
|
|
length).
|
|
- interrupts: Contains the interrupt information for the timer. The
|
|
format is being dependent on which interrupt controller
|
|
the OMAP device uses.
|
|
- ti,hwmods: Name of the hwmod associated to the timer, "timer<X>",
|
|
where <X> is the instance number of the timer from the
|
|
HW spec.
|
|
|
|
Optional properties:
|
|
- ti,timer-alwon: Indicates the timer is in an alway-on power domain.
|
|
- ti,timer-dsp: Indicates the timer can interrupt the on-chip DSP in
|
|
addition to the ARM CPU.
|
|
- ti,timer-pwm: Indicates the timer can generate a PWM output.
|
|
- ti,timer-secure: Indicates the timer is reserved on a secure OMAP device
|
|
and therefore cannot be used by the kernel.
|
|
|
|
Example:
|
|
|
|
timer12: timer@48304000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x48304000 0x400>;
|
|
interrupts = <95>;
|
|
ti,hwmods = "timer12"
|
|
ti,timer-alwon;
|
|
ti,timer-secure;
|
|
};
|