296 lines
7.1 KiB
C
296 lines
7.1 KiB
C
/* sound/soc/s3c24xx/smartq_wm8987.c
|
|
*
|
|
* Copyright 2010 Maurus Cuelenaere <mcuelenaere@gmail.com>
|
|
*
|
|
* Based on smdk6410_wm8987.c
|
|
* Copyright 2007 Wolfson Microelectronics PLC. - linux@wolfsonmicro.com
|
|
* Graeme Gregory - graeme.gregory@wolfsonmicro.com
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/gpio.h>
|
|
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc-dapm.h>
|
|
#include <sound/jack.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
|
|
#include "s3c-dma.h"
|
|
#include "s3c64xx-i2s.h"
|
|
|
|
#include "../codecs/wm8750.h"
|
|
|
|
/*
|
|
* WM8987 is register compatible with WM8750, so using that as base driver.
|
|
*/
|
|
|
|
static struct snd_soc_card snd_soc_smartq;
|
|
|
|
static int smartq_hifi_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
|
|
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
|
|
struct s3c_i2sv2_rate_calc div;
|
|
unsigned int clk = 0;
|
|
int ret;
|
|
|
|
s3c_i2sv2_iis_calc_rate(&div, NULL, params_rate(params),
|
|
s3c_i2sv2_get_clock(cpu_dai));
|
|
|
|
switch (params_rate(params)) {
|
|
case 8000:
|
|
case 16000:
|
|
case 32000:
|
|
case 48000:
|
|
case 96000:
|
|
clk = 12288000;
|
|
break;
|
|
case 11025:
|
|
case 22050:
|
|
case 44100:
|
|
case 88200:
|
|
clk = 11289600;
|
|
break;
|
|
}
|
|
|
|
/* set codec DAI configuration */
|
|
ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
|
|
SND_SOC_DAIFMT_NB_NF |
|
|
SND_SOC_DAIFMT_CBS_CFS);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* set cpu DAI configuration */
|
|
ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
|
|
SND_SOC_DAIFMT_NB_NF |
|
|
SND_SOC_DAIFMT_CBS_CFS);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* set the codec system clock for DAC and ADC */
|
|
ret = snd_soc_dai_set_sysclk(codec_dai, WM8750_SYSCLK, clk,
|
|
SND_SOC_CLOCK_IN);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* set MCLK division for sample rate */
|
|
ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C_I2SV2_DIV_RCLK, div.fs_div);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* set prescaler division for sample rate */
|
|
ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C_I2SV2_DIV_PRESCALER,
|
|
div.clk_div - 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* SmartQ WM8987 HiFi DAI operations.
|
|
*/
|
|
static struct snd_soc_ops smartq_hifi_ops = {
|
|
.hw_params = smartq_hifi_hw_params,
|
|
};
|
|
|
|
static struct snd_soc_jack smartq_jack;
|
|
|
|
static struct snd_soc_jack_pin smartq_jack_pins[] = {
|
|
/* Disable speaker when headphone is plugged in */
|
|
{
|
|
.pin = "Internal Speaker",
|
|
.mask = SND_JACK_HEADPHONE,
|
|
},
|
|
};
|
|
|
|
static struct snd_soc_jack_gpio smartq_jack_gpios[] = {
|
|
{
|
|
.gpio = S3C64XX_GPL(12),
|
|
.name = "headphone detect",
|
|
.report = SND_JACK_HEADPHONE,
|
|
.debounce_time = 200,
|
|
},
|
|
};
|
|
|
|
static const struct snd_kcontrol_new wm8987_smartq_controls[] = {
|
|
SOC_DAPM_PIN_SWITCH("Internal Speaker"),
|
|
SOC_DAPM_PIN_SWITCH("Headphone Jack"),
|
|
SOC_DAPM_PIN_SWITCH("Internal Mic"),
|
|
};
|
|
|
|
static int smartq_speaker_event(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *k,
|
|
int event)
|
|
{
|
|
gpio_set_value(S3C64XX_GPK(12), SND_SOC_DAPM_EVENT_OFF(event));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_soc_dapm_widget wm8987_dapm_widgets[] = {
|
|
SND_SOC_DAPM_SPK("Internal Speaker", smartq_speaker_event),
|
|
SND_SOC_DAPM_HP("Headphone Jack", NULL),
|
|
SND_SOC_DAPM_MIC("Internal Mic", NULL),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route audio_map[] = {
|
|
{"Headphone Jack", NULL, "LOUT2"},
|
|
{"Headphone Jack", NULL, "ROUT2"},
|
|
|
|
{"Internal Speaker", NULL, "LOUT2"},
|
|
{"Internal Speaker", NULL, "ROUT2"},
|
|
|
|
{"Mic Bias", NULL, "Internal Mic"},
|
|
{"LINPUT2", NULL, "Mic Bias"},
|
|
};
|
|
|
|
static int smartq_wm8987_init(struct snd_soc_codec *codec)
|
|
{
|
|
int err = 0;
|
|
|
|
/* Add SmartQ specific widgets */
|
|
snd_soc_dapm_new_controls(codec, wm8987_dapm_widgets,
|
|
ARRAY_SIZE(wm8987_dapm_widgets));
|
|
|
|
/* add SmartQ specific controls */
|
|
err = snd_soc_add_controls(codec, wm8987_smartq_controls,
|
|
ARRAY_SIZE(wm8987_smartq_controls));
|
|
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/* setup SmartQ specific audio path */
|
|
snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
|
|
|
|
/* set endpoints to not connected */
|
|
snd_soc_dapm_nc_pin(codec, "LINPUT1");
|
|
snd_soc_dapm_nc_pin(codec, "RINPUT1");
|
|
snd_soc_dapm_nc_pin(codec, "OUT3");
|
|
snd_soc_dapm_nc_pin(codec, "ROUT1");
|
|
|
|
/* set endpoints to default off mode */
|
|
snd_soc_dapm_enable_pin(codec, "Internal Speaker");
|
|
snd_soc_dapm_enable_pin(codec, "Internal Mic");
|
|
snd_soc_dapm_disable_pin(codec, "Headphone Jack");
|
|
|
|
err = snd_soc_dapm_sync(codec);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Headphone jack detection */
|
|
err = snd_soc_jack_new(&snd_soc_smartq, "Headphone Jack",
|
|
SND_JACK_HEADPHONE, &smartq_jack);
|
|
if (err)
|
|
return err;
|
|
|
|
err = snd_soc_jack_add_pins(&smartq_jack, ARRAY_SIZE(smartq_jack_pins),
|
|
smartq_jack_pins);
|
|
if (err)
|
|
return err;
|
|
|
|
err = snd_soc_jack_add_gpios(&smartq_jack,
|
|
ARRAY_SIZE(smartq_jack_gpios),
|
|
smartq_jack_gpios);
|
|
|
|
return err;
|
|
}
|
|
|
|
static struct snd_soc_dai_link smartq_dai[] = {
|
|
{
|
|
.name = "wm8987",
|
|
.stream_name = "SmartQ Hi-Fi",
|
|
.cpu_dai = &s3c64xx_i2s_dai[0],
|
|
.codec_dai = &wm8750_dai,
|
|
.init = smartq_wm8987_init,
|
|
.ops = &smartq_hifi_ops,
|
|
},
|
|
};
|
|
|
|
static struct snd_soc_card snd_soc_smartq = {
|
|
.name = "SmartQ",
|
|
.platform = &s3c24xx_soc_platform,
|
|
.dai_link = smartq_dai,
|
|
.num_links = ARRAY_SIZE(smartq_dai),
|
|
};
|
|
|
|
static struct snd_soc_device smartq_snd_devdata = {
|
|
.card = &snd_soc_smartq,
|
|
.codec_dev = &soc_codec_dev_wm8750,
|
|
};
|
|
|
|
static struct platform_device *smartq_snd_device;
|
|
|
|
static int __init smartq_init(void)
|
|
{
|
|
int ret;
|
|
|
|
if (!machine_is_smartq7() && !machine_is_smartq5()) {
|
|
pr_info("Only SmartQ is supported by this ASoC driver\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
smartq_snd_device = platform_device_alloc("soc-audio", -1);
|
|
if (!smartq_snd_device)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(smartq_snd_device, &smartq_snd_devdata);
|
|
smartq_snd_devdata.dev = &smartq_snd_device->dev;
|
|
|
|
ret = platform_device_add(smartq_snd_device);
|
|
if (ret) {
|
|
platform_device_put(smartq_snd_device);
|
|
return ret;
|
|
}
|
|
|
|
/* Initialise GPIOs used by amplifiers */
|
|
ret = gpio_request(S3C64XX_GPK(12), "amplifiers shutdown");
|
|
if (ret) {
|
|
dev_err(&smartq_snd_device->dev, "Failed to register GPK12\n");
|
|
goto err_unregister_device;
|
|
}
|
|
|
|
/* Disable amplifiers */
|
|
ret = gpio_direction_output(S3C64XX_GPK(12), 1);
|
|
if (ret) {
|
|
dev_err(&smartq_snd_device->dev, "Failed to configure GPK12\n");
|
|
goto err_free_gpio_amp_shut;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_free_gpio_amp_shut:
|
|
gpio_free(S3C64XX_GPK(12));
|
|
err_unregister_device:
|
|
platform_device_unregister(smartq_snd_device);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __exit smartq_exit(void)
|
|
{
|
|
snd_soc_jack_free_gpios(&smartq_jack, ARRAY_SIZE(smartq_jack_gpios),
|
|
smartq_jack_gpios);
|
|
|
|
platform_device_unregister(smartq_snd_device);
|
|
}
|
|
|
|
module_init(smartq_init);
|
|
module_exit(smartq_exit);
|
|
|
|
/* Module information */
|
|
MODULE_AUTHOR("Maurus Cuelenaere <mcuelenaere@gmail.com>");
|
|
MODULE_DESCRIPTION("ALSA SoC SmartQ WM8987");
|
|
MODULE_LICENSE("GPL");
|