3205 lines
85 KiB
C
3205 lines
85 KiB
C
/*-
|
|
* Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
|
|
* Copyright (c) 2004-2005 Atheros Communications, Inc.
|
|
* Copyright (c) 2006 Devicescape Software, Inc.
|
|
* Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
|
|
* Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer,
|
|
* without modification.
|
|
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
|
|
* similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
|
|
* redistribution must be conditioned upon including a substantially
|
|
* similar Disclaimer requirement for further binary redistribution.
|
|
* 3. Neither the names of the above-listed copyright holders nor the names
|
|
* of any contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* Alternatively, this software may be distributed under the terms of the
|
|
* GNU General Public License ("GPL") version 2 as published by the Free
|
|
* Software Foundation.
|
|
*
|
|
* NO WARRANTY
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
|
|
* AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
|
|
* THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
|
|
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
|
|
* IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGES.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/hardirq.h>
|
|
#include <linux/if.h>
|
|
#include <linux/io.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/cache.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/uaccess.h>
|
|
|
|
#include <net/ieee80211_radiotap.h>
|
|
|
|
#include <asm/unaligned.h>
|
|
|
|
#include "base.h"
|
|
#include "reg.h"
|
|
#include "debug.h"
|
|
|
|
static int ath5k_calinterval = 10; /* Calibrate PHY every 10 secs (TODO: Fixme) */
|
|
static int modparam_nohwcrypt;
|
|
module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
|
|
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
|
|
|
|
|
|
/******************\
|
|
* Internal defines *
|
|
\******************/
|
|
|
|
/* Module info */
|
|
MODULE_AUTHOR("Jiri Slaby");
|
|
MODULE_AUTHOR("Nick Kossifidis");
|
|
MODULE_DESCRIPTION("Support for 5xxx series of Atheros 802.11 wireless LAN cards.");
|
|
MODULE_SUPPORTED_DEVICE("Atheros 5xxx WLAN cards");
|
|
MODULE_LICENSE("Dual BSD/GPL");
|
|
MODULE_VERSION("0.6.0 (EXPERIMENTAL)");
|
|
|
|
|
|
/* Known PCI ids */
|
|
static struct pci_device_id ath5k_pci_id_table[] __devinitdata = {
|
|
{ PCI_VDEVICE(ATHEROS, 0x0207), .driver_data = AR5K_AR5210 }, /* 5210 early */
|
|
{ PCI_VDEVICE(ATHEROS, 0x0007), .driver_data = AR5K_AR5210 }, /* 5210 */
|
|
{ PCI_VDEVICE(ATHEROS, 0x0011), .driver_data = AR5K_AR5211 }, /* 5311 - this is on AHB bus !*/
|
|
{ PCI_VDEVICE(ATHEROS, 0x0012), .driver_data = AR5K_AR5211 }, /* 5211 */
|
|
{ PCI_VDEVICE(ATHEROS, 0x0013), .driver_data = AR5K_AR5212 }, /* 5212 */
|
|
{ PCI_VDEVICE(3COM_2, 0x0013), .driver_data = AR5K_AR5212 }, /* 3com 5212 */
|
|
{ PCI_VDEVICE(3COM, 0x0013), .driver_data = AR5K_AR5212 }, /* 3com 3CRDAG675 5212 */
|
|
{ PCI_VDEVICE(ATHEROS, 0x1014), .driver_data = AR5K_AR5212 }, /* IBM minipci 5212 */
|
|
{ PCI_VDEVICE(ATHEROS, 0x0014), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
|
|
{ PCI_VDEVICE(ATHEROS, 0x0015), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
|
|
{ PCI_VDEVICE(ATHEROS, 0x0016), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
|
|
{ PCI_VDEVICE(ATHEROS, 0x0017), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
|
|
{ PCI_VDEVICE(ATHEROS, 0x0018), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
|
|
{ PCI_VDEVICE(ATHEROS, 0x0019), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
|
|
{ PCI_VDEVICE(ATHEROS, 0x001a), .driver_data = AR5K_AR5212 }, /* 2413 Griffin-lite */
|
|
{ PCI_VDEVICE(ATHEROS, 0x001b), .driver_data = AR5K_AR5212 }, /* 5413 Eagle */
|
|
{ PCI_VDEVICE(ATHEROS, 0x001c), .driver_data = AR5K_AR5212 }, /* PCI-E cards */
|
|
{ PCI_VDEVICE(ATHEROS, 0x001d), .driver_data = AR5K_AR5212 }, /* 2417 Nala */
|
|
{ 0 }
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table);
|
|
|
|
/* Known SREVs */
|
|
static struct ath5k_srev_name srev_names[] = {
|
|
{ "5210", AR5K_VERSION_MAC, AR5K_SREV_AR5210 },
|
|
{ "5311", AR5K_VERSION_MAC, AR5K_SREV_AR5311 },
|
|
{ "5311A", AR5K_VERSION_MAC, AR5K_SREV_AR5311A },
|
|
{ "5311B", AR5K_VERSION_MAC, AR5K_SREV_AR5311B },
|
|
{ "5211", AR5K_VERSION_MAC, AR5K_SREV_AR5211 },
|
|
{ "5212", AR5K_VERSION_MAC, AR5K_SREV_AR5212 },
|
|
{ "5213", AR5K_VERSION_MAC, AR5K_SREV_AR5213 },
|
|
{ "5213A", AR5K_VERSION_MAC, AR5K_SREV_AR5213A },
|
|
{ "2413", AR5K_VERSION_MAC, AR5K_SREV_AR2413 },
|
|
{ "2414", AR5K_VERSION_MAC, AR5K_SREV_AR2414 },
|
|
{ "5424", AR5K_VERSION_MAC, AR5K_SREV_AR5424 },
|
|
{ "5413", AR5K_VERSION_MAC, AR5K_SREV_AR5413 },
|
|
{ "5414", AR5K_VERSION_MAC, AR5K_SREV_AR5414 },
|
|
{ "2415", AR5K_VERSION_MAC, AR5K_SREV_AR2415 },
|
|
{ "5416", AR5K_VERSION_MAC, AR5K_SREV_AR5416 },
|
|
{ "5418", AR5K_VERSION_MAC, AR5K_SREV_AR5418 },
|
|
{ "2425", AR5K_VERSION_MAC, AR5K_SREV_AR2425 },
|
|
{ "2417", AR5K_VERSION_MAC, AR5K_SREV_AR2417 },
|
|
{ "xxxxx", AR5K_VERSION_MAC, AR5K_SREV_UNKNOWN },
|
|
{ "5110", AR5K_VERSION_RAD, AR5K_SREV_RAD_5110 },
|
|
{ "5111", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111 },
|
|
{ "5111A", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111A },
|
|
{ "2111", AR5K_VERSION_RAD, AR5K_SREV_RAD_2111 },
|
|
{ "5112", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112 },
|
|
{ "5112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112A },
|
|
{ "5112B", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112B },
|
|
{ "2112", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112 },
|
|
{ "2112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112A },
|
|
{ "2112B", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112B },
|
|
{ "2413", AR5K_VERSION_RAD, AR5K_SREV_RAD_2413 },
|
|
{ "5413", AR5K_VERSION_RAD, AR5K_SREV_RAD_5413 },
|
|
{ "2316", AR5K_VERSION_RAD, AR5K_SREV_RAD_2316 },
|
|
{ "2317", AR5K_VERSION_RAD, AR5K_SREV_RAD_2317 },
|
|
{ "5424", AR5K_VERSION_RAD, AR5K_SREV_RAD_5424 },
|
|
{ "5133", AR5K_VERSION_RAD, AR5K_SREV_RAD_5133 },
|
|
{ "xxxxx", AR5K_VERSION_RAD, AR5K_SREV_UNKNOWN },
|
|
};
|
|
|
|
static struct ieee80211_rate ath5k_rates[] = {
|
|
{ .bitrate = 10,
|
|
.hw_value = ATH5K_RATE_CODE_1M, },
|
|
{ .bitrate = 20,
|
|
.hw_value = ATH5K_RATE_CODE_2M,
|
|
.hw_value_short = ATH5K_RATE_CODE_2M | AR5K_SET_SHORT_PREAMBLE,
|
|
.flags = IEEE80211_RATE_SHORT_PREAMBLE },
|
|
{ .bitrate = 55,
|
|
.hw_value = ATH5K_RATE_CODE_5_5M,
|
|
.hw_value_short = ATH5K_RATE_CODE_5_5M | AR5K_SET_SHORT_PREAMBLE,
|
|
.flags = IEEE80211_RATE_SHORT_PREAMBLE },
|
|
{ .bitrate = 110,
|
|
.hw_value = ATH5K_RATE_CODE_11M,
|
|
.hw_value_short = ATH5K_RATE_CODE_11M | AR5K_SET_SHORT_PREAMBLE,
|
|
.flags = IEEE80211_RATE_SHORT_PREAMBLE },
|
|
{ .bitrate = 60,
|
|
.hw_value = ATH5K_RATE_CODE_6M,
|
|
.flags = 0 },
|
|
{ .bitrate = 90,
|
|
.hw_value = ATH5K_RATE_CODE_9M,
|
|
.flags = 0 },
|
|
{ .bitrate = 120,
|
|
.hw_value = ATH5K_RATE_CODE_12M,
|
|
.flags = 0 },
|
|
{ .bitrate = 180,
|
|
.hw_value = ATH5K_RATE_CODE_18M,
|
|
.flags = 0 },
|
|
{ .bitrate = 240,
|
|
.hw_value = ATH5K_RATE_CODE_24M,
|
|
.flags = 0 },
|
|
{ .bitrate = 360,
|
|
.hw_value = ATH5K_RATE_CODE_36M,
|
|
.flags = 0 },
|
|
{ .bitrate = 480,
|
|
.hw_value = ATH5K_RATE_CODE_48M,
|
|
.flags = 0 },
|
|
{ .bitrate = 540,
|
|
.hw_value = ATH5K_RATE_CODE_54M,
|
|
.flags = 0 },
|
|
/* XR missing */
|
|
};
|
|
|
|
/*
|
|
* Prototypes - PCI stack related functions
|
|
*/
|
|
static int __devinit ath5k_pci_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *id);
|
|
static void __devexit ath5k_pci_remove(struct pci_dev *pdev);
|
|
#ifdef CONFIG_PM
|
|
static int ath5k_pci_suspend(struct pci_dev *pdev,
|
|
pm_message_t state);
|
|
static int ath5k_pci_resume(struct pci_dev *pdev);
|
|
#else
|
|
#define ath5k_pci_suspend NULL
|
|
#define ath5k_pci_resume NULL
|
|
#endif /* CONFIG_PM */
|
|
|
|
static struct pci_driver ath5k_pci_driver = {
|
|
.name = KBUILD_MODNAME,
|
|
.id_table = ath5k_pci_id_table,
|
|
.probe = ath5k_pci_probe,
|
|
.remove = __devexit_p(ath5k_pci_remove),
|
|
.suspend = ath5k_pci_suspend,
|
|
.resume = ath5k_pci_resume,
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
* Prototypes - MAC 802.11 stack related functions
|
|
*/
|
|
static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
|
|
static int ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel);
|
|
static int ath5k_reset_wake(struct ath5k_softc *sc);
|
|
static int ath5k_start(struct ieee80211_hw *hw);
|
|
static void ath5k_stop(struct ieee80211_hw *hw);
|
|
static int ath5k_add_interface(struct ieee80211_hw *hw,
|
|
struct ieee80211_if_init_conf *conf);
|
|
static void ath5k_remove_interface(struct ieee80211_hw *hw,
|
|
struct ieee80211_if_init_conf *conf);
|
|
static int ath5k_config(struct ieee80211_hw *hw, u32 changed);
|
|
static int ath5k_config_interface(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_if_conf *conf);
|
|
static void ath5k_configure_filter(struct ieee80211_hw *hw,
|
|
unsigned int changed_flags,
|
|
unsigned int *new_flags,
|
|
int mc_count, struct dev_mc_list *mclist);
|
|
static int ath5k_set_key(struct ieee80211_hw *hw,
|
|
enum set_key_cmd cmd,
|
|
struct ieee80211_vif *vif, struct ieee80211_sta *sta,
|
|
struct ieee80211_key_conf *key);
|
|
static int ath5k_get_stats(struct ieee80211_hw *hw,
|
|
struct ieee80211_low_level_stats *stats);
|
|
static int ath5k_get_tx_stats(struct ieee80211_hw *hw,
|
|
struct ieee80211_tx_queue_stats *stats);
|
|
static u64 ath5k_get_tsf(struct ieee80211_hw *hw);
|
|
static void ath5k_set_tsf(struct ieee80211_hw *hw, u64 tsf);
|
|
static void ath5k_reset_tsf(struct ieee80211_hw *hw);
|
|
static int ath5k_beacon_update(struct ath5k_softc *sc,
|
|
struct sk_buff *skb);
|
|
static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_bss_conf *bss_conf,
|
|
u32 changes);
|
|
|
|
static struct ieee80211_ops ath5k_hw_ops = {
|
|
.tx = ath5k_tx,
|
|
.start = ath5k_start,
|
|
.stop = ath5k_stop,
|
|
.add_interface = ath5k_add_interface,
|
|
.remove_interface = ath5k_remove_interface,
|
|
.config = ath5k_config,
|
|
.config_interface = ath5k_config_interface,
|
|
.configure_filter = ath5k_configure_filter,
|
|
.set_key = ath5k_set_key,
|
|
.get_stats = ath5k_get_stats,
|
|
.conf_tx = NULL,
|
|
.get_tx_stats = ath5k_get_tx_stats,
|
|
.get_tsf = ath5k_get_tsf,
|
|
.set_tsf = ath5k_set_tsf,
|
|
.reset_tsf = ath5k_reset_tsf,
|
|
.bss_info_changed = ath5k_bss_info_changed,
|
|
};
|
|
|
|
/*
|
|
* Prototypes - Internal functions
|
|
*/
|
|
/* Attach detach */
|
|
static int ath5k_attach(struct pci_dev *pdev,
|
|
struct ieee80211_hw *hw);
|
|
static void ath5k_detach(struct pci_dev *pdev,
|
|
struct ieee80211_hw *hw);
|
|
/* Channel/mode setup */
|
|
static inline short ath5k_ieee2mhz(short chan);
|
|
static unsigned int ath5k_copy_channels(struct ath5k_hw *ah,
|
|
struct ieee80211_channel *channels,
|
|
unsigned int mode,
|
|
unsigned int max);
|
|
static int ath5k_setup_bands(struct ieee80211_hw *hw);
|
|
static int ath5k_chan_set(struct ath5k_softc *sc,
|
|
struct ieee80211_channel *chan);
|
|
static void ath5k_setcurmode(struct ath5k_softc *sc,
|
|
unsigned int mode);
|
|
static void ath5k_mode_setup(struct ath5k_softc *sc);
|
|
|
|
/* Descriptor setup */
|
|
static int ath5k_desc_alloc(struct ath5k_softc *sc,
|
|
struct pci_dev *pdev);
|
|
static void ath5k_desc_free(struct ath5k_softc *sc,
|
|
struct pci_dev *pdev);
|
|
/* Buffers setup */
|
|
static int ath5k_rxbuf_setup(struct ath5k_softc *sc,
|
|
struct ath5k_buf *bf);
|
|
static int ath5k_txbuf_setup(struct ath5k_softc *sc,
|
|
struct ath5k_buf *bf);
|
|
static inline void ath5k_txbuf_free(struct ath5k_softc *sc,
|
|
struct ath5k_buf *bf)
|
|
{
|
|
BUG_ON(!bf);
|
|
if (!bf->skb)
|
|
return;
|
|
pci_unmap_single(sc->pdev, bf->skbaddr, bf->skb->len,
|
|
PCI_DMA_TODEVICE);
|
|
dev_kfree_skb_any(bf->skb);
|
|
bf->skb = NULL;
|
|
}
|
|
|
|
static inline void ath5k_rxbuf_free(struct ath5k_softc *sc,
|
|
struct ath5k_buf *bf)
|
|
{
|
|
BUG_ON(!bf);
|
|
if (!bf->skb)
|
|
return;
|
|
pci_unmap_single(sc->pdev, bf->skbaddr, sc->rxbufsize,
|
|
PCI_DMA_FROMDEVICE);
|
|
dev_kfree_skb_any(bf->skb);
|
|
bf->skb = NULL;
|
|
}
|
|
|
|
|
|
/* Queues setup */
|
|
static struct ath5k_txq *ath5k_txq_setup(struct ath5k_softc *sc,
|
|
int qtype, int subtype);
|
|
static int ath5k_beaconq_setup(struct ath5k_hw *ah);
|
|
static int ath5k_beaconq_config(struct ath5k_softc *sc);
|
|
static void ath5k_txq_drainq(struct ath5k_softc *sc,
|
|
struct ath5k_txq *txq);
|
|
static void ath5k_txq_cleanup(struct ath5k_softc *sc);
|
|
static void ath5k_txq_release(struct ath5k_softc *sc);
|
|
/* Rx handling */
|
|
static int ath5k_rx_start(struct ath5k_softc *sc);
|
|
static void ath5k_rx_stop(struct ath5k_softc *sc);
|
|
static unsigned int ath5k_rx_decrypted(struct ath5k_softc *sc,
|
|
struct ath5k_desc *ds,
|
|
struct sk_buff *skb,
|
|
struct ath5k_rx_status *rs);
|
|
static void ath5k_tasklet_rx(unsigned long data);
|
|
/* Tx handling */
|
|
static void ath5k_tx_processq(struct ath5k_softc *sc,
|
|
struct ath5k_txq *txq);
|
|
static void ath5k_tasklet_tx(unsigned long data);
|
|
/* Beacon handling */
|
|
static int ath5k_beacon_setup(struct ath5k_softc *sc,
|
|
struct ath5k_buf *bf);
|
|
static void ath5k_beacon_send(struct ath5k_softc *sc);
|
|
static void ath5k_beacon_config(struct ath5k_softc *sc);
|
|
static void ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf);
|
|
static void ath5k_tasklet_beacon(unsigned long data);
|
|
|
|
static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp)
|
|
{
|
|
u64 tsf = ath5k_hw_get_tsf64(ah);
|
|
|
|
if ((tsf & 0x7fff) < rstamp)
|
|
tsf -= 0x8000;
|
|
|
|
return (tsf & ~0x7fff) | rstamp;
|
|
}
|
|
|
|
/* Interrupt handling */
|
|
static int ath5k_init(struct ath5k_softc *sc);
|
|
static int ath5k_stop_locked(struct ath5k_softc *sc);
|
|
static int ath5k_stop_hw(struct ath5k_softc *sc);
|
|
static irqreturn_t ath5k_intr(int irq, void *dev_id);
|
|
static void ath5k_tasklet_reset(unsigned long data);
|
|
|
|
static void ath5k_calibrate(unsigned long data);
|
|
/* LED functions */
|
|
static int ath5k_init_leds(struct ath5k_softc *sc);
|
|
static void ath5k_led_enable(struct ath5k_softc *sc);
|
|
static void ath5k_led_off(struct ath5k_softc *sc);
|
|
static void ath5k_unregister_leds(struct ath5k_softc *sc);
|
|
|
|
/*
|
|
* Module init/exit functions
|
|
*/
|
|
static int __init
|
|
init_ath5k_pci(void)
|
|
{
|
|
int ret;
|
|
|
|
ath5k_debug_init();
|
|
|
|
ret = pci_register_driver(&ath5k_pci_driver);
|
|
if (ret) {
|
|
printk(KERN_ERR "ath5k_pci: can't register pci driver\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __exit
|
|
exit_ath5k_pci(void)
|
|
{
|
|
pci_unregister_driver(&ath5k_pci_driver);
|
|
|
|
ath5k_debug_finish();
|
|
}
|
|
|
|
module_init(init_ath5k_pci);
|
|
module_exit(exit_ath5k_pci);
|
|
|
|
|
|
/********************\
|
|
* PCI Initialization *
|
|
\********************/
|
|
|
|
static const char *
|
|
ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val)
|
|
{
|
|
const char *name = "xxxxx";
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(srev_names); i++) {
|
|
if (srev_names[i].sr_type != type)
|
|
continue;
|
|
|
|
if ((val & 0xf0) == srev_names[i].sr_val)
|
|
name = srev_names[i].sr_name;
|
|
|
|
if ((val & 0xff) == srev_names[i].sr_val) {
|
|
name = srev_names[i].sr_name;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return name;
|
|
}
|
|
|
|
static int __devinit
|
|
ath5k_pci_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *id)
|
|
{
|
|
void __iomem *mem;
|
|
struct ath5k_softc *sc;
|
|
struct ieee80211_hw *hw;
|
|
int ret;
|
|
u8 csz;
|
|
|
|
ret = pci_enable_device(pdev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "can't enable device\n");
|
|
goto err;
|
|
}
|
|
|
|
/* XXX 32-bit addressing only */
|
|
ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "32-bit DMA not available\n");
|
|
goto err_dis;
|
|
}
|
|
|
|
/*
|
|
* Cache line size is used to size and align various
|
|
* structures used to communicate with the hardware.
|
|
*/
|
|
pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
|
|
if (csz == 0) {
|
|
/*
|
|
* Linux 2.4.18 (at least) writes the cache line size
|
|
* register as a 16-bit wide register which is wrong.
|
|
* We must have this setup properly for rx buffer
|
|
* DMA to work so force a reasonable value here if it
|
|
* comes up zero.
|
|
*/
|
|
csz = L1_CACHE_BYTES / sizeof(u32);
|
|
pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
|
|
}
|
|
/*
|
|
* The default setting of latency timer yields poor results,
|
|
* set it to the value used by other systems. It may be worth
|
|
* tweaking this setting more.
|
|
*/
|
|
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
|
|
|
|
/* Enable bus mastering */
|
|
pci_set_master(pdev);
|
|
|
|
/*
|
|
* Disable the RETRY_TIMEOUT register (0x41) to keep
|
|
* PCI Tx retries from interfering with C3 CPU state.
|
|
*/
|
|
pci_write_config_byte(pdev, 0x41, 0);
|
|
|
|
ret = pci_request_region(pdev, 0, "ath5k");
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "cannot reserve PCI memory region\n");
|
|
goto err_dis;
|
|
}
|
|
|
|
mem = pci_iomap(pdev, 0, 0);
|
|
if (!mem) {
|
|
dev_err(&pdev->dev, "cannot remap PCI memory region\n") ;
|
|
ret = -EIO;
|
|
goto err_reg;
|
|
}
|
|
|
|
/*
|
|
* Allocate hw (mac80211 main struct)
|
|
* and hw->priv (driver private data)
|
|
*/
|
|
hw = ieee80211_alloc_hw(sizeof(*sc), &ath5k_hw_ops);
|
|
if (hw == NULL) {
|
|
dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n");
|
|
ret = -ENOMEM;
|
|
goto err_map;
|
|
}
|
|
|
|
dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy));
|
|
|
|
/* Initialize driver private data */
|
|
SET_IEEE80211_DEV(hw, &pdev->dev);
|
|
hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
|
|
IEEE80211_HW_SIGNAL_DBM |
|
|
IEEE80211_HW_NOISE_DBM;
|
|
|
|
hw->wiphy->interface_modes =
|
|
BIT(NL80211_IFTYPE_STATION) |
|
|
BIT(NL80211_IFTYPE_ADHOC) |
|
|
BIT(NL80211_IFTYPE_MESH_POINT);
|
|
|
|
hw->extra_tx_headroom = 2;
|
|
hw->channel_change_time = 5000;
|
|
sc = hw->priv;
|
|
sc->hw = hw;
|
|
sc->pdev = pdev;
|
|
|
|
ath5k_debug_init_device(sc);
|
|
|
|
/*
|
|
* Mark the device as detached to avoid processing
|
|
* interrupts until setup is complete.
|
|
*/
|
|
__set_bit(ATH_STAT_INVALID, sc->status);
|
|
|
|
sc->iobase = mem; /* So we can unmap it on detach */
|
|
sc->cachelsz = csz * sizeof(u32); /* convert to bytes */
|
|
sc->opmode = NL80211_IFTYPE_STATION;
|
|
mutex_init(&sc->lock);
|
|
spin_lock_init(&sc->rxbuflock);
|
|
spin_lock_init(&sc->txbuflock);
|
|
spin_lock_init(&sc->block);
|
|
|
|
/* Set private data */
|
|
pci_set_drvdata(pdev, hw);
|
|
|
|
/* Setup interrupt handler */
|
|
ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
|
|
if (ret) {
|
|
ATH5K_ERR(sc, "request_irq failed\n");
|
|
goto err_free;
|
|
}
|
|
|
|
/* Initialize device */
|
|
sc->ah = ath5k_hw_attach(sc, id->driver_data);
|
|
if (IS_ERR(sc->ah)) {
|
|
ret = PTR_ERR(sc->ah);
|
|
goto err_irq;
|
|
}
|
|
|
|
/* set up multi-rate retry capabilities */
|
|
if (sc->ah->ah_version == AR5K_AR5212) {
|
|
hw->max_rates = 4;
|
|
hw->max_rate_tries = 11;
|
|
}
|
|
|
|
/* Finish private driver data initialization */
|
|
ret = ath5k_attach(pdev, hw);
|
|
if (ret)
|
|
goto err_ah;
|
|
|
|
ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
|
|
ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev),
|
|
sc->ah->ah_mac_srev,
|
|
sc->ah->ah_phy_revision);
|
|
|
|
if (!sc->ah->ah_single_chip) {
|
|
/* Single chip radio (!RF5111) */
|
|
if (sc->ah->ah_radio_5ghz_revision &&
|
|
!sc->ah->ah_radio_2ghz_revision) {
|
|
/* No 5GHz support -> report 2GHz radio */
|
|
if (!test_bit(AR5K_MODE_11A,
|
|
sc->ah->ah_capabilities.cap_mode)) {
|
|
ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
|
|
ath5k_chip_name(AR5K_VERSION_RAD,
|
|
sc->ah->ah_radio_5ghz_revision),
|
|
sc->ah->ah_radio_5ghz_revision);
|
|
/* No 2GHz support (5110 and some
|
|
* 5Ghz only cards) -> report 5Ghz radio */
|
|
} else if (!test_bit(AR5K_MODE_11B,
|
|
sc->ah->ah_capabilities.cap_mode)) {
|
|
ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
|
|
ath5k_chip_name(AR5K_VERSION_RAD,
|
|
sc->ah->ah_radio_5ghz_revision),
|
|
sc->ah->ah_radio_5ghz_revision);
|
|
/* Multiband radio */
|
|
} else {
|
|
ATH5K_INFO(sc, "RF%s multiband radio found"
|
|
" (0x%x)\n",
|
|
ath5k_chip_name(AR5K_VERSION_RAD,
|
|
sc->ah->ah_radio_5ghz_revision),
|
|
sc->ah->ah_radio_5ghz_revision);
|
|
}
|
|
}
|
|
/* Multi chip radio (RF5111 - RF2111) ->
|
|
* report both 2GHz/5GHz radios */
|
|
else if (sc->ah->ah_radio_5ghz_revision &&
|
|
sc->ah->ah_radio_2ghz_revision){
|
|
ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
|
|
ath5k_chip_name(AR5K_VERSION_RAD,
|
|
sc->ah->ah_radio_5ghz_revision),
|
|
sc->ah->ah_radio_5ghz_revision);
|
|
ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
|
|
ath5k_chip_name(AR5K_VERSION_RAD,
|
|
sc->ah->ah_radio_2ghz_revision),
|
|
sc->ah->ah_radio_2ghz_revision);
|
|
}
|
|
}
|
|
|
|
|
|
/* ready to process interrupts */
|
|
__clear_bit(ATH_STAT_INVALID, sc->status);
|
|
|
|
return 0;
|
|
err_ah:
|
|
ath5k_hw_detach(sc->ah);
|
|
err_irq:
|
|
free_irq(pdev->irq, sc);
|
|
err_free:
|
|
ieee80211_free_hw(hw);
|
|
err_map:
|
|
pci_iounmap(pdev, mem);
|
|
err_reg:
|
|
pci_release_region(pdev, 0);
|
|
err_dis:
|
|
pci_disable_device(pdev);
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static void __devexit
|
|
ath5k_pci_remove(struct pci_dev *pdev)
|
|
{
|
|
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
|
|
struct ath5k_softc *sc = hw->priv;
|
|
|
|
ath5k_debug_finish_device(sc);
|
|
ath5k_detach(pdev, hw);
|
|
ath5k_hw_detach(sc->ah);
|
|
free_irq(pdev->irq, sc);
|
|
pci_iounmap(pdev, sc->iobase);
|
|
pci_release_region(pdev, 0);
|
|
pci_disable_device(pdev);
|
|
ieee80211_free_hw(hw);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int
|
|
ath5k_pci_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
|
|
struct ath5k_softc *sc = hw->priv;
|
|
|
|
ath5k_led_off(sc);
|
|
|
|
free_irq(pdev->irq, sc);
|
|
pci_save_state(pdev);
|
|
pci_disable_device(pdev);
|
|
pci_set_power_state(pdev, PCI_D3hot);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ath5k_pci_resume(struct pci_dev *pdev)
|
|
{
|
|
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
|
|
struct ath5k_softc *sc = hw->priv;
|
|
int err;
|
|
|
|
pci_restore_state(pdev);
|
|
|
|
err = pci_enable_device(pdev);
|
|
if (err)
|
|
return err;
|
|
|
|
/*
|
|
* Suspend/Resume resets the PCI configuration space, so we have to
|
|
* re-disable the RETRY_TIMEOUT register (0x41) to keep
|
|
* PCI Tx retries from interfering with C3 CPU state
|
|
*/
|
|
pci_write_config_byte(pdev, 0x41, 0);
|
|
|
|
err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
|
|
if (err) {
|
|
ATH5K_ERR(sc, "request_irq failed\n");
|
|
goto err_no_irq;
|
|
}
|
|
|
|
ath5k_led_enable(sc);
|
|
return 0;
|
|
|
|
err_no_irq:
|
|
pci_disable_device(pdev);
|
|
return err;
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
|
|
/***********************\
|
|
* Driver Initialization *
|
|
\***********************/
|
|
|
|
static int
|
|
ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
|
|
{
|
|
struct ath5k_softc *sc = hw->priv;
|
|
struct ath5k_hw *ah = sc->ah;
|
|
u8 mac[ETH_ALEN] = {};
|
|
int ret;
|
|
|
|
ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device);
|
|
|
|
/*
|
|
* Check if the MAC has multi-rate retry support.
|
|
* We do this by trying to setup a fake extended
|
|
* descriptor. MAC's that don't have support will
|
|
* return false w/o doing anything. MAC's that do
|
|
* support it will return true w/o doing anything.
|
|
*/
|
|
ret = ah->ah_setup_mrr_tx_desc(ah, NULL, 0, 0, 0, 0, 0, 0);
|
|
if (ret < 0)
|
|
goto err;
|
|
if (ret > 0)
|
|
__set_bit(ATH_STAT_MRRETRY, sc->status);
|
|
|
|
/*
|
|
* Collect the channel list. The 802.11 layer
|
|
* is resposible for filtering this list based
|
|
* on settings like the phy mode and regulatory
|
|
* domain restrictions.
|
|
*/
|
|
ret = ath5k_setup_bands(hw);
|
|
if (ret) {
|
|
ATH5K_ERR(sc, "can't get channels\n");
|
|
goto err;
|
|
}
|
|
|
|
/* NB: setup here so ath5k_rate_update is happy */
|
|
if (test_bit(AR5K_MODE_11A, ah->ah_modes))
|
|
ath5k_setcurmode(sc, AR5K_MODE_11A);
|
|
else
|
|
ath5k_setcurmode(sc, AR5K_MODE_11B);
|
|
|
|
/*
|
|
* Allocate tx+rx descriptors and populate the lists.
|
|
*/
|
|
ret = ath5k_desc_alloc(sc, pdev);
|
|
if (ret) {
|
|
ATH5K_ERR(sc, "can't allocate descriptors\n");
|
|
goto err;
|
|
}
|
|
|
|
/*
|
|
* Allocate hardware transmit queues: one queue for
|
|
* beacon frames and one data queue for each QoS
|
|
* priority. Note that hw functions handle reseting
|
|
* these queues at the needed time.
|
|
*/
|
|
ret = ath5k_beaconq_setup(ah);
|
|
if (ret < 0) {
|
|
ATH5K_ERR(sc, "can't setup a beacon xmit queue\n");
|
|
goto err_desc;
|
|
}
|
|
sc->bhalq = ret;
|
|
|
|
sc->txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK);
|
|
if (IS_ERR(sc->txq)) {
|
|
ATH5K_ERR(sc, "can't setup xmit queue\n");
|
|
ret = PTR_ERR(sc->txq);
|
|
goto err_bhal;
|
|
}
|
|
|
|
tasklet_init(&sc->rxtq, ath5k_tasklet_rx, (unsigned long)sc);
|
|
tasklet_init(&sc->txtq, ath5k_tasklet_tx, (unsigned long)sc);
|
|
tasklet_init(&sc->restq, ath5k_tasklet_reset, (unsigned long)sc);
|
|
tasklet_init(&sc->beacontq, ath5k_tasklet_beacon, (unsigned long)sc);
|
|
setup_timer(&sc->calib_tim, ath5k_calibrate, (unsigned long)sc);
|
|
|
|
ret = ath5k_eeprom_read_mac(ah, mac);
|
|
if (ret) {
|
|
ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n",
|
|
sc->pdev->device);
|
|
goto err_queues;
|
|
}
|
|
|
|
SET_IEEE80211_PERM_ADDR(hw, mac);
|
|
/* All MAC address bits matter for ACKs */
|
|
memset(sc->bssidmask, 0xff, ETH_ALEN);
|
|
ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask);
|
|
|
|
ret = ieee80211_register_hw(hw);
|
|
if (ret) {
|
|
ATH5K_ERR(sc, "can't register ieee80211 hw\n");
|
|
goto err_queues;
|
|
}
|
|
|
|
ath5k_init_leds(sc);
|
|
|
|
return 0;
|
|
err_queues:
|
|
ath5k_txq_release(sc);
|
|
err_bhal:
|
|
ath5k_hw_release_tx_queue(ah, sc->bhalq);
|
|
err_desc:
|
|
ath5k_desc_free(sc, pdev);
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw)
|
|
{
|
|
struct ath5k_softc *sc = hw->priv;
|
|
|
|
/*
|
|
* NB: the order of these is important:
|
|
* o call the 802.11 layer before detaching ath5k_hw to
|
|
* insure callbacks into the driver to delete global
|
|
* key cache entries can be handled
|
|
* o reclaim the tx queue data structures after calling
|
|
* the 802.11 layer as we'll get called back to reclaim
|
|
* node state and potentially want to use them
|
|
* o to cleanup the tx queues the hal is called, so detach
|
|
* it last
|
|
* XXX: ??? detach ath5k_hw ???
|
|
* Other than that, it's straightforward...
|
|
*/
|
|
ieee80211_unregister_hw(hw);
|
|
ath5k_desc_free(sc, pdev);
|
|
ath5k_txq_release(sc);
|
|
ath5k_hw_release_tx_queue(sc->ah, sc->bhalq);
|
|
ath5k_unregister_leds(sc);
|
|
|
|
/*
|
|
* NB: can't reclaim these until after ieee80211_ifdetach
|
|
* returns because we'll get called back to reclaim node
|
|
* state and potentially want to use them.
|
|
*/
|
|
}
|
|
|
|
|
|
|
|
|
|
/********************\
|
|
* Channel/mode setup *
|
|
\********************/
|
|
|
|
/*
|
|
* Convert IEEE channel number to MHz frequency.
|
|
*/
|
|
static inline short
|
|
ath5k_ieee2mhz(short chan)
|
|
{
|
|
if (chan <= 14 || chan >= 27)
|
|
return ieee80211chan2mhz(chan);
|
|
else
|
|
return 2212 + chan * 20;
|
|
}
|
|
|
|
static unsigned int
|
|
ath5k_copy_channels(struct ath5k_hw *ah,
|
|
struct ieee80211_channel *channels,
|
|
unsigned int mode,
|
|
unsigned int max)
|
|
{
|
|
unsigned int i, count, size, chfreq, freq, ch;
|
|
|
|
if (!test_bit(mode, ah->ah_modes))
|
|
return 0;
|
|
|
|
switch (mode) {
|
|
case AR5K_MODE_11A:
|
|
case AR5K_MODE_11A_TURBO:
|
|
/* 1..220, but 2GHz frequencies are filtered by check_channel */
|
|
size = 220 ;
|
|
chfreq = CHANNEL_5GHZ;
|
|
break;
|
|
case AR5K_MODE_11B:
|
|
case AR5K_MODE_11G:
|
|
case AR5K_MODE_11G_TURBO:
|
|
size = 26;
|
|
chfreq = CHANNEL_2GHZ;
|
|
break;
|
|
default:
|
|
ATH5K_WARN(ah->ah_sc, "bad mode, not copying channels\n");
|
|
return 0;
|
|
}
|
|
|
|
for (i = 0, count = 0; i < size && max > 0; i++) {
|
|
ch = i + 1 ;
|
|
freq = ath5k_ieee2mhz(ch);
|
|
|
|
/* Check if channel is supported by the chipset */
|
|
if (!ath5k_channel_ok(ah, freq, chfreq))
|
|
continue;
|
|
|
|
/* Write channel info and increment counter */
|
|
channels[count].center_freq = freq;
|
|
channels[count].band = (chfreq == CHANNEL_2GHZ) ?
|
|
IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
|
|
switch (mode) {
|
|
case AR5K_MODE_11A:
|
|
case AR5K_MODE_11G:
|
|
channels[count].hw_value = chfreq | CHANNEL_OFDM;
|
|
break;
|
|
case AR5K_MODE_11A_TURBO:
|
|
case AR5K_MODE_11G_TURBO:
|
|
channels[count].hw_value = chfreq |
|
|
CHANNEL_OFDM | CHANNEL_TURBO;
|
|
break;
|
|
case AR5K_MODE_11B:
|
|
channels[count].hw_value = CHANNEL_B;
|
|
}
|
|
|
|
count++;
|
|
max--;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static void
|
|
ath5k_setup_rate_idx(struct ath5k_softc *sc, struct ieee80211_supported_band *b)
|
|
{
|
|
u8 i;
|
|
|
|
for (i = 0; i < AR5K_MAX_RATES; i++)
|
|
sc->rate_idx[b->band][i] = -1;
|
|
|
|
for (i = 0; i < b->n_bitrates; i++) {
|
|
sc->rate_idx[b->band][b->bitrates[i].hw_value] = i;
|
|
if (b->bitrates[i].hw_value_short)
|
|
sc->rate_idx[b->band][b->bitrates[i].hw_value_short] = i;
|
|
}
|
|
}
|
|
|
|
static int
|
|
ath5k_setup_bands(struct ieee80211_hw *hw)
|
|
{
|
|
struct ath5k_softc *sc = hw->priv;
|
|
struct ath5k_hw *ah = sc->ah;
|
|
struct ieee80211_supported_band *sband;
|
|
int max_c, count_c = 0;
|
|
int i;
|
|
|
|
BUILD_BUG_ON(ARRAY_SIZE(sc->sbands) < IEEE80211_NUM_BANDS);
|
|
max_c = ARRAY_SIZE(sc->channels);
|
|
|
|
/* 2GHz band */
|
|
sband = &sc->sbands[IEEE80211_BAND_2GHZ];
|
|
sband->band = IEEE80211_BAND_2GHZ;
|
|
sband->bitrates = &sc->rates[IEEE80211_BAND_2GHZ][0];
|
|
|
|
if (test_bit(AR5K_MODE_11G, sc->ah->ah_capabilities.cap_mode)) {
|
|
/* G mode */
|
|
memcpy(sband->bitrates, &ath5k_rates[0],
|
|
sizeof(struct ieee80211_rate) * 12);
|
|
sband->n_bitrates = 12;
|
|
|
|
sband->channels = sc->channels;
|
|
sband->n_channels = ath5k_copy_channels(ah, sband->channels,
|
|
AR5K_MODE_11G, max_c);
|
|
|
|
hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
|
|
count_c = sband->n_channels;
|
|
max_c -= count_c;
|
|
} else if (test_bit(AR5K_MODE_11B, sc->ah->ah_capabilities.cap_mode)) {
|
|
/* B mode */
|
|
memcpy(sband->bitrates, &ath5k_rates[0],
|
|
sizeof(struct ieee80211_rate) * 4);
|
|
sband->n_bitrates = 4;
|
|
|
|
/* 5211 only supports B rates and uses 4bit rate codes
|
|
* (e.g normally we have 0x1B for 1M, but on 5211 we have 0x0B)
|
|
* fix them up here:
|
|
*/
|
|
if (ah->ah_version == AR5K_AR5211) {
|
|
for (i = 0; i < 4; i++) {
|
|
sband->bitrates[i].hw_value =
|
|
sband->bitrates[i].hw_value & 0xF;
|
|
sband->bitrates[i].hw_value_short =
|
|
sband->bitrates[i].hw_value_short & 0xF;
|
|
}
|
|
}
|
|
|
|
sband->channels = sc->channels;
|
|
sband->n_channels = ath5k_copy_channels(ah, sband->channels,
|
|
AR5K_MODE_11B, max_c);
|
|
|
|
hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
|
|
count_c = sband->n_channels;
|
|
max_c -= count_c;
|
|
}
|
|
ath5k_setup_rate_idx(sc, sband);
|
|
|
|
/* 5GHz band, A mode */
|
|
if (test_bit(AR5K_MODE_11A, sc->ah->ah_capabilities.cap_mode)) {
|
|
sband = &sc->sbands[IEEE80211_BAND_5GHZ];
|
|
sband->band = IEEE80211_BAND_5GHZ;
|
|
sband->bitrates = &sc->rates[IEEE80211_BAND_5GHZ][0];
|
|
|
|
memcpy(sband->bitrates, &ath5k_rates[4],
|
|
sizeof(struct ieee80211_rate) * 8);
|
|
sband->n_bitrates = 8;
|
|
|
|
sband->channels = &sc->channels[count_c];
|
|
sband->n_channels = ath5k_copy_channels(ah, sband->channels,
|
|
AR5K_MODE_11A, max_c);
|
|
|
|
hw->wiphy->bands[IEEE80211_BAND_5GHZ] = sband;
|
|
}
|
|
ath5k_setup_rate_idx(sc, sband);
|
|
|
|
ath5k_debug_dump_bands(sc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set/change channels. If the channel is really being changed,
|
|
* it's done by reseting the chip. To accomplish this we must
|
|
* first cleanup any pending DMA, then restart stuff after a la
|
|
* ath5k_init.
|
|
*
|
|
* Called with sc->lock.
|
|
*/
|
|
static int
|
|
ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
|
|
{
|
|
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "(%u MHz) -> (%u MHz)\n",
|
|
sc->curchan->center_freq, chan->center_freq);
|
|
|
|
if (chan->center_freq != sc->curchan->center_freq ||
|
|
chan->hw_value != sc->curchan->hw_value) {
|
|
|
|
sc->curchan = chan;
|
|
sc->curband = &sc->sbands[chan->band];
|
|
|
|
/*
|
|
* To switch channels clear any pending DMA operations;
|
|
* wait long enough for the RX fifo to drain, reset the
|
|
* hardware at the new frequency, and then re-enable
|
|
* the relevant bits of the h/w.
|
|
*/
|
|
return ath5k_reset(sc, true, true);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode)
|
|
{
|
|
sc->curmode = mode;
|
|
|
|
if (mode == AR5K_MODE_11A) {
|
|
sc->curband = &sc->sbands[IEEE80211_BAND_5GHZ];
|
|
} else {
|
|
sc->curband = &sc->sbands[IEEE80211_BAND_2GHZ];
|
|
}
|
|
}
|
|
|
|
static void
|
|
ath5k_mode_setup(struct ath5k_softc *sc)
|
|
{
|
|
struct ath5k_hw *ah = sc->ah;
|
|
u32 rfilt;
|
|
|
|
/* configure rx filter */
|
|
rfilt = sc->filter_flags;
|
|
ath5k_hw_set_rx_filter(ah, rfilt);
|
|
|
|
if (ath5k_hw_hasbssidmask(ah))
|
|
ath5k_hw_set_bssid_mask(ah, sc->bssidmask);
|
|
|
|
/* configure operational mode */
|
|
ath5k_hw_set_opmode(ah);
|
|
|
|
ath5k_hw_set_mcast_filter(ah, 0, 0);
|
|
ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt);
|
|
}
|
|
|
|
static inline int
|
|
ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix)
|
|
{
|
|
WARN_ON(hw_rix < 0 || hw_rix > AR5K_MAX_RATES);
|
|
return sc->rate_idx[sc->curband->band][hw_rix];
|
|
}
|
|
|
|
/***************\
|
|
* Buffers setup *
|
|
\***************/
|
|
|
|
static
|
|
struct sk_buff *ath5k_rx_skb_alloc(struct ath5k_softc *sc, dma_addr_t *skb_addr)
|
|
{
|
|
struct sk_buff *skb;
|
|
unsigned int off;
|
|
|
|
/*
|
|
* Allocate buffer with headroom_needed space for the
|
|
* fake physical layer header at the start.
|
|
*/
|
|
skb = dev_alloc_skb(sc->rxbufsize + sc->cachelsz - 1);
|
|
|
|
if (!skb) {
|
|
ATH5K_ERR(sc, "can't alloc skbuff of size %u\n",
|
|
sc->rxbufsize + sc->cachelsz - 1);
|
|
return NULL;
|
|
}
|
|
/*
|
|
* Cache-line-align. This is important (for the
|
|
* 5210 at least) as not doing so causes bogus data
|
|
* in rx'd frames.
|
|
*/
|
|
off = ((unsigned long)skb->data) % sc->cachelsz;
|
|
if (off != 0)
|
|
skb_reserve(skb, sc->cachelsz - off);
|
|
|
|
*skb_addr = pci_map_single(sc->pdev,
|
|
skb->data, sc->rxbufsize, PCI_DMA_FROMDEVICE);
|
|
if (unlikely(pci_dma_mapping_error(sc->pdev, *skb_addr))) {
|
|
ATH5K_ERR(sc, "%s: DMA mapping failed\n", __func__);
|
|
dev_kfree_skb(skb);
|
|
return NULL;
|
|
}
|
|
return skb;
|
|
}
|
|
|
|
static int
|
|
ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
|
|
{
|
|
struct ath5k_hw *ah = sc->ah;
|
|
struct sk_buff *skb = bf->skb;
|
|
struct ath5k_desc *ds;
|
|
|
|
if (!skb) {
|
|
skb = ath5k_rx_skb_alloc(sc, &bf->skbaddr);
|
|
if (!skb)
|
|
return -ENOMEM;
|
|
bf->skb = skb;
|
|
}
|
|
|
|
/*
|
|
* Setup descriptors. For receive we always terminate
|
|
* the descriptor list with a self-linked entry so we'll
|
|
* not get overrun under high load (as can happen with a
|
|
* 5212 when ANI processing enables PHY error frames).
|
|
*
|
|
* To insure the last descriptor is self-linked we create
|
|
* each descriptor as self-linked and add it to the end. As
|
|
* each additional descriptor is added the previous self-linked
|
|
* entry is ``fixed'' naturally. This should be safe even
|
|
* if DMA is happening. When processing RX interrupts we
|
|
* never remove/process the last, self-linked, entry on the
|
|
* descriptor list. This insures the hardware always has
|
|
* someplace to write a new frame.
|
|
*/
|
|
ds = bf->desc;
|
|
ds->ds_link = bf->daddr; /* link to self */
|
|
ds->ds_data = bf->skbaddr;
|
|
ah->ah_setup_rx_desc(ah, ds,
|
|
skb_tailroom(skb), /* buffer size */
|
|
0);
|
|
|
|
if (sc->rxlink != NULL)
|
|
*sc->rxlink = bf->daddr;
|
|
sc->rxlink = &ds->ds_link;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
|
|
{
|
|
struct ath5k_hw *ah = sc->ah;
|
|
struct ath5k_txq *txq = sc->txq;
|
|
struct ath5k_desc *ds = bf->desc;
|
|
struct sk_buff *skb = bf->skb;
|
|
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
|
|
unsigned int pktlen, flags, keyidx = AR5K_TXKEYIX_INVALID;
|
|
struct ieee80211_rate *rate;
|
|
unsigned int mrr_rate[3], mrr_tries[3];
|
|
int i, ret;
|
|
u16 hw_rate;
|
|
u16 cts_rate = 0;
|
|
u16 duration = 0;
|
|
u8 rc_flags;
|
|
|
|
flags = AR5K_TXDESC_INTREQ | AR5K_TXDESC_CLRDMASK;
|
|
|
|
/* XXX endianness */
|
|
bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len,
|
|
PCI_DMA_TODEVICE);
|
|
|
|
rate = ieee80211_get_tx_rate(sc->hw, info);
|
|
|
|
if (info->flags & IEEE80211_TX_CTL_NO_ACK)
|
|
flags |= AR5K_TXDESC_NOACK;
|
|
|
|
rc_flags = info->control.rates[0].flags;
|
|
hw_rate = (rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) ?
|
|
rate->hw_value_short : rate->hw_value;
|
|
|
|
pktlen = skb->len;
|
|
|
|
if (info->control.hw_key) {
|
|
keyidx = info->control.hw_key->hw_key_idx;
|
|
pktlen += info->control.hw_key->icv_len;
|
|
}
|
|
if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
|
|
flags |= AR5K_TXDESC_RTSENA;
|
|
cts_rate = ieee80211_get_rts_cts_rate(sc->hw, info)->hw_value;
|
|
duration = le16_to_cpu(ieee80211_rts_duration(sc->hw,
|
|
sc->vif, pktlen, info));
|
|
}
|
|
if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
|
|
flags |= AR5K_TXDESC_CTSENA;
|
|
cts_rate = ieee80211_get_rts_cts_rate(sc->hw, info)->hw_value;
|
|
duration = le16_to_cpu(ieee80211_ctstoself_duration(sc->hw,
|
|
sc->vif, pktlen, info));
|
|
}
|
|
ret = ah->ah_setup_tx_desc(ah, ds, pktlen,
|
|
ieee80211_get_hdrlen_from_skb(skb), AR5K_PKT_TYPE_NORMAL,
|
|
(sc->power_level * 2),
|
|
hw_rate,
|
|
info->control.rates[0].count, keyidx, 0, flags,
|
|
cts_rate, duration);
|
|
if (ret)
|
|
goto err_unmap;
|
|
|
|
memset(mrr_rate, 0, sizeof(mrr_rate));
|
|
memset(mrr_tries, 0, sizeof(mrr_tries));
|
|
for (i = 0; i < 3; i++) {
|
|
rate = ieee80211_get_alt_retry_rate(sc->hw, info, i);
|
|
if (!rate)
|
|
break;
|
|
|
|
mrr_rate[i] = rate->hw_value;
|
|
mrr_tries[i] = info->control.rates[i + 1].count;
|
|
}
|
|
|
|
ah->ah_setup_mrr_tx_desc(ah, ds,
|
|
mrr_rate[0], mrr_tries[0],
|
|
mrr_rate[1], mrr_tries[1],
|
|
mrr_rate[2], mrr_tries[2]);
|
|
|
|
ds->ds_link = 0;
|
|
ds->ds_data = bf->skbaddr;
|
|
|
|
spin_lock_bh(&txq->lock);
|
|
list_add_tail(&bf->list, &txq->q);
|
|
sc->tx_stats[txq->qnum].len++;
|
|
if (txq->link == NULL) /* is this first packet? */
|
|
ath5k_hw_set_txdp(ah, txq->qnum, bf->daddr);
|
|
else /* no, so only link it */
|
|
*txq->link = bf->daddr;
|
|
|
|
txq->link = &ds->ds_link;
|
|
ath5k_hw_start_tx_dma(ah, txq->qnum);
|
|
mmiowb();
|
|
spin_unlock_bh(&txq->lock);
|
|
|
|
return 0;
|
|
err_unmap:
|
|
pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE);
|
|
return ret;
|
|
}
|
|
|
|
/*******************\
|
|
* Descriptors setup *
|
|
\*******************/
|
|
|
|
static int
|
|
ath5k_desc_alloc(struct ath5k_softc *sc, struct pci_dev *pdev)
|
|
{
|
|
struct ath5k_desc *ds;
|
|
struct ath5k_buf *bf;
|
|
dma_addr_t da;
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
/* allocate descriptors */
|
|
sc->desc_len = sizeof(struct ath5k_desc) *
|
|
(ATH_TXBUF + ATH_RXBUF + ATH_BCBUF + 1);
|
|
sc->desc = pci_alloc_consistent(pdev, sc->desc_len, &sc->desc_daddr);
|
|
if (sc->desc == NULL) {
|
|
ATH5K_ERR(sc, "can't allocate descriptors\n");
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
ds = sc->desc;
|
|
da = sc->desc_daddr;
|
|
ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "DMA map: %p (%zu) -> %llx\n",
|
|
ds, sc->desc_len, (unsigned long long)sc->desc_daddr);
|
|
|
|
bf = kcalloc(1 + ATH_TXBUF + ATH_RXBUF + ATH_BCBUF,
|
|
sizeof(struct ath5k_buf), GFP_KERNEL);
|
|
if (bf == NULL) {
|
|
ATH5K_ERR(sc, "can't allocate bufptr\n");
|
|
ret = -ENOMEM;
|
|
goto err_free;
|
|
}
|
|
sc->bufptr = bf;
|
|
|
|
INIT_LIST_HEAD(&sc->rxbuf);
|
|
for (i = 0; i < ATH_RXBUF; i++, bf++, ds++, da += sizeof(*ds)) {
|
|
bf->desc = ds;
|
|
bf->daddr = da;
|
|
list_add_tail(&bf->list, &sc->rxbuf);
|
|
}
|
|
|
|
INIT_LIST_HEAD(&sc->txbuf);
|
|
sc->txbuf_len = ATH_TXBUF;
|
|
for (i = 0; i < ATH_TXBUF; i++, bf++, ds++,
|
|
da += sizeof(*ds)) {
|
|
bf->desc = ds;
|
|
bf->daddr = da;
|
|
list_add_tail(&bf->list, &sc->txbuf);
|
|
}
|
|
|
|
/* beacon buffer */
|
|
bf->desc = ds;
|
|
bf->daddr = da;
|
|
sc->bbuf = bf;
|
|
|
|
return 0;
|
|
err_free:
|
|
pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr);
|
|
err:
|
|
sc->desc = NULL;
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
ath5k_desc_free(struct ath5k_softc *sc, struct pci_dev *pdev)
|
|
{
|
|
struct ath5k_buf *bf;
|
|
|
|
ath5k_txbuf_free(sc, sc->bbuf);
|
|
list_for_each_entry(bf, &sc->txbuf, list)
|
|
ath5k_txbuf_free(sc, bf);
|
|
list_for_each_entry(bf, &sc->rxbuf, list)
|
|
ath5k_rxbuf_free(sc, bf);
|
|
|
|
/* Free memory associated with all descriptors */
|
|
pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr);
|
|
|
|
kfree(sc->bufptr);
|
|
sc->bufptr = NULL;
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/**************\
|
|
* Queues setup *
|
|
\**************/
|
|
|
|
static struct ath5k_txq *
|
|
ath5k_txq_setup(struct ath5k_softc *sc,
|
|
int qtype, int subtype)
|
|
{
|
|
struct ath5k_hw *ah = sc->ah;
|
|
struct ath5k_txq *txq;
|
|
struct ath5k_txq_info qi = {
|
|
.tqi_subtype = subtype,
|
|
.tqi_aifs = AR5K_TXQ_USEDEFAULT,
|
|
.tqi_cw_min = AR5K_TXQ_USEDEFAULT,
|
|
.tqi_cw_max = AR5K_TXQ_USEDEFAULT
|
|
};
|
|
int qnum;
|
|
|
|
/*
|
|
* Enable interrupts only for EOL and DESC conditions.
|
|
* We mark tx descriptors to receive a DESC interrupt
|
|
* when a tx queue gets deep; otherwise waiting for the
|
|
* EOL to reap descriptors. Note that this is done to
|
|
* reduce interrupt load and this only defers reaping
|
|
* descriptors, never transmitting frames. Aside from
|
|
* reducing interrupts this also permits more concurrency.
|
|
* The only potential downside is if the tx queue backs
|
|
* up in which case the top half of the kernel may backup
|
|
* due to a lack of tx descriptors.
|
|
*/
|
|
qi.tqi_flags = AR5K_TXQ_FLAG_TXEOLINT_ENABLE |
|
|
AR5K_TXQ_FLAG_TXDESCINT_ENABLE;
|
|
qnum = ath5k_hw_setup_tx_queue(ah, qtype, &qi);
|
|
if (qnum < 0) {
|
|
/*
|
|
* NB: don't print a message, this happens
|
|
* normally on parts with too few tx queues
|
|
*/
|
|
return ERR_PTR(qnum);
|
|
}
|
|
if (qnum >= ARRAY_SIZE(sc->txqs)) {
|
|
ATH5K_ERR(sc, "hw qnum %u out of range, max %tu!\n",
|
|
qnum, ARRAY_SIZE(sc->txqs));
|
|
ath5k_hw_release_tx_queue(ah, qnum);
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
txq = &sc->txqs[qnum];
|
|
if (!txq->setup) {
|
|
txq->qnum = qnum;
|
|
txq->link = NULL;
|
|
INIT_LIST_HEAD(&txq->q);
|
|
spin_lock_init(&txq->lock);
|
|
txq->setup = true;
|
|
}
|
|
return &sc->txqs[qnum];
|
|
}
|
|
|
|
static int
|
|
ath5k_beaconq_setup(struct ath5k_hw *ah)
|
|
{
|
|
struct ath5k_txq_info qi = {
|
|
.tqi_aifs = AR5K_TXQ_USEDEFAULT,
|
|
.tqi_cw_min = AR5K_TXQ_USEDEFAULT,
|
|
.tqi_cw_max = AR5K_TXQ_USEDEFAULT,
|
|
/* NB: for dynamic turbo, don't enable any other interrupts */
|
|
.tqi_flags = AR5K_TXQ_FLAG_TXDESCINT_ENABLE
|
|
};
|
|
|
|
return ath5k_hw_setup_tx_queue(ah, AR5K_TX_QUEUE_BEACON, &qi);
|
|
}
|
|
|
|
static int
|
|
ath5k_beaconq_config(struct ath5k_softc *sc)
|
|
{
|
|
struct ath5k_hw *ah = sc->ah;
|
|
struct ath5k_txq_info qi;
|
|
int ret;
|
|
|
|
ret = ath5k_hw_get_tx_queueprops(ah, sc->bhalq, &qi);
|
|
if (ret)
|
|
return ret;
|
|
if (sc->opmode == NL80211_IFTYPE_AP ||
|
|
sc->opmode == NL80211_IFTYPE_MESH_POINT) {
|
|
/*
|
|
* Always burst out beacon and CAB traffic
|
|
* (aifs = cwmin = cwmax = 0)
|
|
*/
|
|
qi.tqi_aifs = 0;
|
|
qi.tqi_cw_min = 0;
|
|
qi.tqi_cw_max = 0;
|
|
} else if (sc->opmode == NL80211_IFTYPE_ADHOC) {
|
|
/*
|
|
* Adhoc mode; backoff between 0 and (2 * cw_min).
|
|
*/
|
|
qi.tqi_aifs = 0;
|
|
qi.tqi_cw_min = 0;
|
|
qi.tqi_cw_max = 2 * ah->ah_cw_min;
|
|
}
|
|
|
|
ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
|
|
"beacon queueprops tqi_aifs:%d tqi_cw_min:%d tqi_cw_max:%d\n",
|
|
qi.tqi_aifs, qi.tqi_cw_min, qi.tqi_cw_max);
|
|
|
|
ret = ath5k_hw_set_tx_queueprops(ah, sc->bhalq, &qi);
|
|
if (ret) {
|
|
ATH5K_ERR(sc, "%s: unable to update parameters for beacon "
|
|
"hardware queue!\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
return ath5k_hw_reset_tx_queue(ah, sc->bhalq); /* push to h/w */;
|
|
}
|
|
|
|
static void
|
|
ath5k_txq_drainq(struct ath5k_softc *sc, struct ath5k_txq *txq)
|
|
{
|
|
struct ath5k_buf *bf, *bf0;
|
|
|
|
/*
|
|
* NB: this assumes output has been stopped and
|
|
* we do not need to block ath5k_tx_tasklet
|
|
*/
|
|
spin_lock_bh(&txq->lock);
|
|
list_for_each_entry_safe(bf, bf0, &txq->q, list) {
|
|
ath5k_debug_printtxbuf(sc, bf);
|
|
|
|
ath5k_txbuf_free(sc, bf);
|
|
|
|
spin_lock_bh(&sc->txbuflock);
|
|
sc->tx_stats[txq->qnum].len--;
|
|
list_move_tail(&bf->list, &sc->txbuf);
|
|
sc->txbuf_len++;
|
|
spin_unlock_bh(&sc->txbuflock);
|
|
}
|
|
txq->link = NULL;
|
|
spin_unlock_bh(&txq->lock);
|
|
}
|
|
|
|
/*
|
|
* Drain the transmit queues and reclaim resources.
|
|
*/
|
|
static void
|
|
ath5k_txq_cleanup(struct ath5k_softc *sc)
|
|
{
|
|
struct ath5k_hw *ah = sc->ah;
|
|
unsigned int i;
|
|
|
|
/* XXX return value */
|
|
if (likely(!test_bit(ATH_STAT_INVALID, sc->status))) {
|
|
/* don't touch the hardware if marked invalid */
|
|
ath5k_hw_stop_tx_dma(ah, sc->bhalq);
|
|
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "beacon queue %x\n",
|
|
ath5k_hw_get_txdp(ah, sc->bhalq));
|
|
for (i = 0; i < ARRAY_SIZE(sc->txqs); i++)
|
|
if (sc->txqs[i].setup) {
|
|
ath5k_hw_stop_tx_dma(ah, sc->txqs[i].qnum);
|
|
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "txq [%u] %x, "
|
|
"link %p\n",
|
|
sc->txqs[i].qnum,
|
|
ath5k_hw_get_txdp(ah,
|
|
sc->txqs[i].qnum),
|
|
sc->txqs[i].link);
|
|
}
|
|
}
|
|
ieee80211_wake_queues(sc->hw); /* XXX move to callers */
|
|
|
|
for (i = 0; i < ARRAY_SIZE(sc->txqs); i++)
|
|
if (sc->txqs[i].setup)
|
|
ath5k_txq_drainq(sc, &sc->txqs[i]);
|
|
}
|
|
|
|
static void
|
|
ath5k_txq_release(struct ath5k_softc *sc)
|
|
{
|
|
struct ath5k_txq *txq = sc->txqs;
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(sc->txqs); i++, txq++)
|
|
if (txq->setup) {
|
|
ath5k_hw_release_tx_queue(sc->ah, txq->qnum);
|
|
txq->setup = false;
|
|
}
|
|
}
|
|
|
|
|
|
|
|
|
|
/*************\
|
|
* RX Handling *
|
|
\*************/
|
|
|
|
/*
|
|
* Enable the receive h/w following a reset.
|
|
*/
|
|
static int
|
|
ath5k_rx_start(struct ath5k_softc *sc)
|
|
{
|
|
struct ath5k_hw *ah = sc->ah;
|
|
struct ath5k_buf *bf;
|
|
int ret;
|
|
|
|
sc->rxbufsize = roundup(IEEE80211_MAX_LEN, sc->cachelsz);
|
|
|
|
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "cachelsz %u rxbufsize %u\n",
|
|
sc->cachelsz, sc->rxbufsize);
|
|
|
|
sc->rxlink = NULL;
|
|
|
|
spin_lock_bh(&sc->rxbuflock);
|
|
list_for_each_entry(bf, &sc->rxbuf, list) {
|
|
ret = ath5k_rxbuf_setup(sc, bf);
|
|
if (ret != 0) {
|
|
spin_unlock_bh(&sc->rxbuflock);
|
|
goto err;
|
|
}
|
|
}
|
|
bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
|
|
spin_unlock_bh(&sc->rxbuflock);
|
|
|
|
ath5k_hw_set_rxdp(ah, bf->daddr);
|
|
ath5k_hw_start_rx_dma(ah); /* enable recv descriptors */
|
|
ath5k_mode_setup(sc); /* set filters, etc. */
|
|
ath5k_hw_start_rx_pcu(ah); /* re-enable PCU/DMA engine */
|
|
|
|
return 0;
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Disable the receive h/w in preparation for a reset.
|
|
*/
|
|
static void
|
|
ath5k_rx_stop(struct ath5k_softc *sc)
|
|
{
|
|
struct ath5k_hw *ah = sc->ah;
|
|
|
|
ath5k_hw_stop_rx_pcu(ah); /* disable PCU */
|
|
ath5k_hw_set_rx_filter(ah, 0); /* clear recv filter */
|
|
ath5k_hw_stop_rx_dma(ah); /* disable DMA engine */
|
|
|
|
ath5k_debug_printrxbuffs(sc, ah);
|
|
|
|
sc->rxlink = NULL; /* just in case */
|
|
}
|
|
|
|
static unsigned int
|
|
ath5k_rx_decrypted(struct ath5k_softc *sc, struct ath5k_desc *ds,
|
|
struct sk_buff *skb, struct ath5k_rx_status *rs)
|
|
{
|
|
struct ieee80211_hdr *hdr = (void *)skb->data;
|
|
unsigned int keyix, hlen;
|
|
|
|
if (!(rs->rs_status & AR5K_RXERR_DECRYPT) &&
|
|
rs->rs_keyix != AR5K_RXKEYIX_INVALID)
|
|
return RX_FLAG_DECRYPTED;
|
|
|
|
/* Apparently when a default key is used to decrypt the packet
|
|
the hw does not set the index used to decrypt. In such cases
|
|
get the index from the packet. */
|
|
hlen = ieee80211_hdrlen(hdr->frame_control);
|
|
if (ieee80211_has_protected(hdr->frame_control) &&
|
|
!(rs->rs_status & AR5K_RXERR_DECRYPT) &&
|
|
skb->len >= hlen + 4) {
|
|
keyix = skb->data[hlen + 3] >> 6;
|
|
|
|
if (test_bit(keyix, sc->keymap))
|
|
return RX_FLAG_DECRYPTED;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void
|
|
ath5k_check_ibss_tsf(struct ath5k_softc *sc, struct sk_buff *skb,
|
|
struct ieee80211_rx_status *rxs)
|
|
{
|
|
u64 tsf, bc_tstamp;
|
|
u32 hw_tu;
|
|
struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data;
|
|
|
|
if (ieee80211_is_beacon(mgmt->frame_control) &&
|
|
le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS &&
|
|
memcmp(mgmt->bssid, sc->ah->ah_bssid, ETH_ALEN) == 0) {
|
|
/*
|
|
* Received an IBSS beacon with the same BSSID. Hardware *must*
|
|
* have updated the local TSF. We have to work around various
|
|
* hardware bugs, though...
|
|
*/
|
|
tsf = ath5k_hw_get_tsf64(sc->ah);
|
|
bc_tstamp = le64_to_cpu(mgmt->u.beacon.timestamp);
|
|
hw_tu = TSF_TO_TU(tsf);
|
|
|
|
ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
|
|
"beacon %llx mactime %llx (diff %lld) tsf now %llx\n",
|
|
(unsigned long long)bc_tstamp,
|
|
(unsigned long long)rxs->mactime,
|
|
(unsigned long long)(rxs->mactime - bc_tstamp),
|
|
(unsigned long long)tsf);
|
|
|
|
/*
|
|
* Sometimes the HW will give us a wrong tstamp in the rx
|
|
* status, causing the timestamp extension to go wrong.
|
|
* (This seems to happen especially with beacon frames bigger
|
|
* than 78 byte (incl. FCS))
|
|
* But we know that the receive timestamp must be later than the
|
|
* timestamp of the beacon since HW must have synced to that.
|
|
*
|
|
* NOTE: here we assume mactime to be after the frame was
|
|
* received, not like mac80211 which defines it at the start.
|
|
*/
|
|
if (bc_tstamp > rxs->mactime) {
|
|
ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
|
|
"fixing mactime from %llx to %llx\n",
|
|
(unsigned long long)rxs->mactime,
|
|
(unsigned long long)tsf);
|
|
rxs->mactime = tsf;
|
|
}
|
|
|
|
/*
|
|
* Local TSF might have moved higher than our beacon timers,
|
|
* in that case we have to update them to continue sending
|
|
* beacons. This also takes care of synchronizing beacon sending
|
|
* times with other stations.
|
|
*/
|
|
if (hw_tu >= sc->nexttbtt)
|
|
ath5k_beacon_update_timers(sc, bc_tstamp);
|
|
}
|
|
}
|
|
|
|
static void ath5k_tasklet_beacon(unsigned long data)
|
|
{
|
|
struct ath5k_softc *sc = (struct ath5k_softc *) data;
|
|
|
|
/*
|
|
* Software beacon alert--time to send a beacon.
|
|
*
|
|
* In IBSS mode we use this interrupt just to
|
|
* keep track of the next TBTT (target beacon
|
|
* transmission time) in order to detect wether
|
|
* automatic TSF updates happened.
|
|
*/
|
|
if (sc->opmode == NL80211_IFTYPE_ADHOC) {
|
|
/* XXX: only if VEOL suppported */
|
|
u64 tsf = ath5k_hw_get_tsf64(sc->ah);
|
|
sc->nexttbtt += sc->bintval;
|
|
ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
|
|
"SWBA nexttbtt: %x hw_tu: %x "
|
|
"TSF: %llx\n",
|
|
sc->nexttbtt,
|
|
TSF_TO_TU(tsf),
|
|
(unsigned long long) tsf);
|
|
} else {
|
|
spin_lock(&sc->block);
|
|
ath5k_beacon_send(sc);
|
|
spin_unlock(&sc->block);
|
|
}
|
|
}
|
|
|
|
static void
|
|
ath5k_tasklet_rx(unsigned long data)
|
|
{
|
|
struct ieee80211_rx_status rxs = {};
|
|
struct ath5k_rx_status rs = {};
|
|
struct sk_buff *skb, *next_skb;
|
|
dma_addr_t next_skb_addr;
|
|
struct ath5k_softc *sc = (void *)data;
|
|
struct ath5k_buf *bf, *bf_last;
|
|
struct ath5k_desc *ds;
|
|
int ret;
|
|
int hdrlen;
|
|
int padsize;
|
|
|
|
spin_lock(&sc->rxbuflock);
|
|
if (list_empty(&sc->rxbuf)) {
|
|
ATH5K_WARN(sc, "empty rx buf pool\n");
|
|
goto unlock;
|
|
}
|
|
bf_last = list_entry(sc->rxbuf.prev, struct ath5k_buf, list);
|
|
do {
|
|
rxs.flag = 0;
|
|
|
|
bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
|
|
BUG_ON(bf->skb == NULL);
|
|
skb = bf->skb;
|
|
ds = bf->desc;
|
|
|
|
/*
|
|
* last buffer must not be freed to ensure proper hardware
|
|
* function. When the hardware finishes also a packet next to
|
|
* it, we are sure, it doesn't use it anymore and we can go on.
|
|
*/
|
|
if (bf_last == bf)
|
|
bf->flags |= 1;
|
|
if (bf->flags) {
|
|
struct ath5k_buf *bf_next = list_entry(bf->list.next,
|
|
struct ath5k_buf, list);
|
|
ret = sc->ah->ah_proc_rx_desc(sc->ah, bf_next->desc,
|
|
&rs);
|
|
if (ret)
|
|
break;
|
|
bf->flags &= ~1;
|
|
/* skip the overwritten one (even status is martian) */
|
|
goto next;
|
|
}
|
|
|
|
ret = sc->ah->ah_proc_rx_desc(sc->ah, ds, &rs);
|
|
if (unlikely(ret == -EINPROGRESS))
|
|
break;
|
|
else if (unlikely(ret)) {
|
|
ATH5K_ERR(sc, "error in processing rx descriptor\n");
|
|
spin_unlock(&sc->rxbuflock);
|
|
return;
|
|
}
|
|
|
|
if (unlikely(rs.rs_more)) {
|
|
ATH5K_WARN(sc, "unsupported jumbo\n");
|
|
goto next;
|
|
}
|
|
|
|
if (unlikely(rs.rs_status)) {
|
|
if (rs.rs_status & AR5K_RXERR_PHY)
|
|
goto next;
|
|
if (rs.rs_status & AR5K_RXERR_DECRYPT) {
|
|
/*
|
|
* Decrypt error. If the error occurred
|
|
* because there was no hardware key, then
|
|
* let the frame through so the upper layers
|
|
* can process it. This is necessary for 5210
|
|
* parts which have no way to setup a ``clear''
|
|
* key cache entry.
|
|
*
|
|
* XXX do key cache faulting
|
|
*/
|
|
if (rs.rs_keyix == AR5K_RXKEYIX_INVALID &&
|
|
!(rs.rs_status & AR5K_RXERR_CRC))
|
|
goto accept;
|
|
}
|
|
if (rs.rs_status & AR5K_RXERR_MIC) {
|
|
rxs.flag |= RX_FLAG_MMIC_ERROR;
|
|
goto accept;
|
|
}
|
|
|
|
/* let crypto-error packets fall through in MNTR */
|
|
if ((rs.rs_status &
|
|
~(AR5K_RXERR_DECRYPT|AR5K_RXERR_MIC)) ||
|
|
sc->opmode != NL80211_IFTYPE_MONITOR)
|
|
goto next;
|
|
}
|
|
accept:
|
|
next_skb = ath5k_rx_skb_alloc(sc, &next_skb_addr);
|
|
|
|
/*
|
|
* If we can't replace bf->skb with a new skb under memory
|
|
* pressure, just skip this packet
|
|
*/
|
|
if (!next_skb)
|
|
goto next;
|
|
|
|
pci_unmap_single(sc->pdev, bf->skbaddr, sc->rxbufsize,
|
|
PCI_DMA_FROMDEVICE);
|
|
skb_put(skb, rs.rs_datalen);
|
|
|
|
/* The MAC header is padded to have 32-bit boundary if the
|
|
* packet payload is non-zero. The general calculation for
|
|
* padsize would take into account odd header lengths:
|
|
* padsize = (4 - hdrlen % 4) % 4; However, since only
|
|
* even-length headers are used, padding can only be 0 or 2
|
|
* bytes and we can optimize this a bit. In addition, we must
|
|
* not try to remove padding from short control frames that do
|
|
* not have payload. */
|
|
hdrlen = ieee80211_get_hdrlen_from_skb(skb);
|
|
padsize = ath5k_pad_size(hdrlen);
|
|
if (padsize) {
|
|
memmove(skb->data + padsize, skb->data, hdrlen);
|
|
skb_pull(skb, padsize);
|
|
}
|
|
|
|
/*
|
|
* always extend the mac timestamp, since this information is
|
|
* also needed for proper IBSS merging.
|
|
*
|
|
* XXX: it might be too late to do it here, since rs_tstamp is
|
|
* 15bit only. that means TSF extension has to be done within
|
|
* 32768usec (about 32ms). it might be necessary to move this to
|
|
* the interrupt handler, like it is done in madwifi.
|
|
*
|
|
* Unfortunately we don't know when the hardware takes the rx
|
|
* timestamp (beginning of phy frame, data frame, end of rx?).
|
|
* The only thing we know is that it is hardware specific...
|
|
* On AR5213 it seems the rx timestamp is at the end of the
|
|
* frame, but i'm not sure.
|
|
*
|
|
* NOTE: mac80211 defines mactime at the beginning of the first
|
|
* data symbol. Since we don't have any time references it's
|
|
* impossible to comply to that. This affects IBSS merge only
|
|
* right now, so it's not too bad...
|
|
*/
|
|
rxs.mactime = ath5k_extend_tsf(sc->ah, rs.rs_tstamp);
|
|
rxs.flag |= RX_FLAG_TSFT;
|
|
|
|
rxs.freq = sc->curchan->center_freq;
|
|
rxs.band = sc->curband->band;
|
|
|
|
rxs.noise = sc->ah->ah_noise_floor;
|
|
rxs.signal = rxs.noise + rs.rs_rssi;
|
|
|
|
/* An rssi of 35 indicates you should be able use
|
|
* 54 Mbps reliably. A more elaborate scheme can be used
|
|
* here but it requires a map of SNR/throughput for each
|
|
* possible mode used */
|
|
rxs.qual = rs.rs_rssi * 100 / 35;
|
|
|
|
/* rssi can be more than 35 though, anything above that
|
|
* should be considered at 100% */
|
|
if (rxs.qual > 100)
|
|
rxs.qual = 100;
|
|
|
|
rxs.antenna = rs.rs_antenna;
|
|
rxs.rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate);
|
|
rxs.flag |= ath5k_rx_decrypted(sc, ds, skb, &rs);
|
|
|
|
if (rxs.rate_idx >= 0 && rs.rs_rate ==
|
|
sc->curband->bitrates[rxs.rate_idx].hw_value_short)
|
|
rxs.flag |= RX_FLAG_SHORTPRE;
|
|
|
|
ath5k_debug_dump_skb(sc, skb, "RX ", 0);
|
|
|
|
/* check beacons in IBSS mode */
|
|
if (sc->opmode == NL80211_IFTYPE_ADHOC)
|
|
ath5k_check_ibss_tsf(sc, skb, &rxs);
|
|
|
|
__ieee80211_rx(sc->hw, skb, &rxs);
|
|
|
|
bf->skb = next_skb;
|
|
bf->skbaddr = next_skb_addr;
|
|
next:
|
|
list_move_tail(&bf->list, &sc->rxbuf);
|
|
} while (ath5k_rxbuf_setup(sc, bf) == 0);
|
|
unlock:
|
|
spin_unlock(&sc->rxbuflock);
|
|
}
|
|
|
|
|
|
|
|
|
|
/*************\
|
|
* TX Handling *
|
|
\*************/
|
|
|
|
static void
|
|
ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
|
|
{
|
|
struct ath5k_tx_status ts = {};
|
|
struct ath5k_buf *bf, *bf0;
|
|
struct ath5k_desc *ds;
|
|
struct sk_buff *skb;
|
|
struct ieee80211_tx_info *info;
|
|
int i, ret;
|
|
|
|
spin_lock(&txq->lock);
|
|
list_for_each_entry_safe(bf, bf0, &txq->q, list) {
|
|
ds = bf->desc;
|
|
|
|
ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts);
|
|
if (unlikely(ret == -EINPROGRESS))
|
|
break;
|
|
else if (unlikely(ret)) {
|
|
ATH5K_ERR(sc, "error %d while processing queue %u\n",
|
|
ret, txq->qnum);
|
|
break;
|
|
}
|
|
|
|
skb = bf->skb;
|
|
info = IEEE80211_SKB_CB(skb);
|
|
bf->skb = NULL;
|
|
|
|
pci_unmap_single(sc->pdev, bf->skbaddr, skb->len,
|
|
PCI_DMA_TODEVICE);
|
|
|
|
ieee80211_tx_info_clear_status(info);
|
|
for (i = 0; i < 4; i++) {
|
|
struct ieee80211_tx_rate *r =
|
|
&info->status.rates[i];
|
|
|
|
if (ts.ts_rate[i]) {
|
|
r->idx = ath5k_hw_to_driver_rix(sc, ts.ts_rate[i]);
|
|
r->count = ts.ts_retry[i];
|
|
} else {
|
|
r->idx = -1;
|
|
r->count = 0;
|
|
}
|
|
}
|
|
|
|
/* count the successful attempt as well */
|
|
info->status.rates[ts.ts_final_idx].count++;
|
|
|
|
if (unlikely(ts.ts_status)) {
|
|
sc->ll_stats.dot11ACKFailureCount++;
|
|
if (ts.ts_status & AR5K_TXERR_FILT)
|
|
info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
|
|
} else {
|
|
info->flags |= IEEE80211_TX_STAT_ACK;
|
|
info->status.ack_signal = ts.ts_rssi;
|
|
}
|
|
|
|
ieee80211_tx_status(sc->hw, skb);
|
|
sc->tx_stats[txq->qnum].count++;
|
|
|
|
spin_lock(&sc->txbuflock);
|
|
sc->tx_stats[txq->qnum].len--;
|
|
list_move_tail(&bf->list, &sc->txbuf);
|
|
sc->txbuf_len++;
|
|
spin_unlock(&sc->txbuflock);
|
|
}
|
|
if (likely(list_empty(&txq->q)))
|
|
txq->link = NULL;
|
|
spin_unlock(&txq->lock);
|
|
if (sc->txbuf_len > ATH_TXBUF / 5)
|
|
ieee80211_wake_queues(sc->hw);
|
|
}
|
|
|
|
static void
|
|
ath5k_tasklet_tx(unsigned long data)
|
|
{
|
|
struct ath5k_softc *sc = (void *)data;
|
|
|
|
ath5k_tx_processq(sc, sc->txq);
|
|
}
|
|
|
|
|
|
/*****************\
|
|
* Beacon handling *
|
|
\*****************/
|
|
|
|
/*
|
|
* Setup the beacon frame for transmit.
|
|
*/
|
|
static int
|
|
ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
|
|
{
|
|
struct sk_buff *skb = bf->skb;
|
|
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
|
|
struct ath5k_hw *ah = sc->ah;
|
|
struct ath5k_desc *ds;
|
|
int ret, antenna = 0;
|
|
u32 flags;
|
|
|
|
bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len,
|
|
PCI_DMA_TODEVICE);
|
|
ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "skb %p [data %p len %u] "
|
|
"skbaddr %llx\n", skb, skb->data, skb->len,
|
|
(unsigned long long)bf->skbaddr);
|
|
if (pci_dma_mapping_error(sc->pdev, bf->skbaddr)) {
|
|
ATH5K_ERR(sc, "beacon DMA mapping failed\n");
|
|
return -EIO;
|
|
}
|
|
|
|
ds = bf->desc;
|
|
|
|
flags = AR5K_TXDESC_NOACK;
|
|
if (sc->opmode == NL80211_IFTYPE_ADHOC && ath5k_hw_hasveol(ah)) {
|
|
ds->ds_link = bf->daddr; /* self-linked */
|
|
flags |= AR5K_TXDESC_VEOL;
|
|
/*
|
|
* Let hardware handle antenna switching if txantenna is not set
|
|
*/
|
|
} else {
|
|
ds->ds_link = 0;
|
|
/*
|
|
* Switch antenna every 4 beacons if txantenna is not set
|
|
* XXX assumes two antennas
|
|
*/
|
|
if (antenna == 0)
|
|
antenna = sc->bsent & 4 ? 2 : 1;
|
|
}
|
|
|
|
ds->ds_data = bf->skbaddr;
|
|
ret = ah->ah_setup_tx_desc(ah, ds, skb->len,
|
|
ieee80211_get_hdrlen_from_skb(skb),
|
|
AR5K_PKT_TYPE_BEACON, (sc->power_level * 2),
|
|
ieee80211_get_tx_rate(sc->hw, info)->hw_value,
|
|
1, AR5K_TXKEYIX_INVALID,
|
|
antenna, flags, 0, 0);
|
|
if (ret)
|
|
goto err_unmap;
|
|
|
|
return 0;
|
|
err_unmap:
|
|
pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Transmit a beacon frame at SWBA. Dynamic updates to the
|
|
* frame contents are done as needed and the slot time is
|
|
* also adjusted based on current state.
|
|
*
|
|
* This is called from software irq context (beacontq or restq
|
|
* tasklets) or user context from ath5k_beacon_config.
|
|
*/
|
|
static void
|
|
ath5k_beacon_send(struct ath5k_softc *sc)
|
|
{
|
|
struct ath5k_buf *bf = sc->bbuf;
|
|
struct ath5k_hw *ah = sc->ah;
|
|
|
|
ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "in beacon_send\n");
|
|
|
|
if (unlikely(bf->skb == NULL || sc->opmode == NL80211_IFTYPE_STATION ||
|
|
sc->opmode == NL80211_IFTYPE_MONITOR)) {
|
|
ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL);
|
|
return;
|
|
}
|
|
/*
|
|
* Check if the previous beacon has gone out. If
|
|
* not don't don't try to post another, skip this
|
|
* period and wait for the next. Missed beacons
|
|
* indicate a problem and should not occur. If we
|
|
* miss too many consecutive beacons reset the device.
|
|
*/
|
|
if (unlikely(ath5k_hw_num_tx_pending(ah, sc->bhalq) != 0)) {
|
|
sc->bmisscount++;
|
|
ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
|
|
"missed %u consecutive beacons\n", sc->bmisscount);
|
|
if (sc->bmisscount > 3) { /* NB: 3 is a guess */
|
|
ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
|
|
"stuck beacon time (%u missed)\n",
|
|
sc->bmisscount);
|
|
tasklet_schedule(&sc->restq);
|
|
}
|
|
return;
|
|
}
|
|
if (unlikely(sc->bmisscount != 0)) {
|
|
ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
|
|
"resume beacon xmit after %u misses\n",
|
|
sc->bmisscount);
|
|
sc->bmisscount = 0;
|
|
}
|
|
|
|
/*
|
|
* Stop any current dma and put the new frame on the queue.
|
|
* This should never fail since we check above that no frames
|
|
* are still pending on the queue.
|
|
*/
|
|
if (unlikely(ath5k_hw_stop_tx_dma(ah, sc->bhalq))) {
|
|
ATH5K_WARN(sc, "beacon queue %u didn't stop?\n", sc->bhalq);
|
|
/* NB: hw still stops DMA, so proceed */
|
|
}
|
|
|
|
ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr);
|
|
ath5k_hw_start_tx_dma(ah, sc->bhalq);
|
|
ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n",
|
|
sc->bhalq, (unsigned long long)bf->daddr, bf->desc);
|
|
|
|
sc->bsent++;
|
|
}
|
|
|
|
|
|
/**
|
|
* ath5k_beacon_update_timers - update beacon timers
|
|
*
|
|
* @sc: struct ath5k_softc pointer we are operating on
|
|
* @bc_tsf: the timestamp of the beacon. 0 to reset the TSF. -1 to perform a
|
|
* beacon timer update based on the current HW TSF.
|
|
*
|
|
* Calculate the next target beacon transmit time (TBTT) based on the timestamp
|
|
* of a received beacon or the current local hardware TSF and write it to the
|
|
* beacon timer registers.
|
|
*
|
|
* This is called in a variety of situations, e.g. when a beacon is received,
|
|
* when a TSF update has been detected, but also when an new IBSS is created or
|
|
* when we otherwise know we have to update the timers, but we keep it in this
|
|
* function to have it all together in one place.
|
|
*/
|
|
static void
|
|
ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf)
|
|
{
|
|
struct ath5k_hw *ah = sc->ah;
|
|
u32 nexttbtt, intval, hw_tu, bc_tu;
|
|
u64 hw_tsf;
|
|
|
|
intval = sc->bintval & AR5K_BEACON_PERIOD;
|
|
if (WARN_ON(!intval))
|
|
return;
|
|
|
|
/* beacon TSF converted to TU */
|
|
bc_tu = TSF_TO_TU(bc_tsf);
|
|
|
|
/* current TSF converted to TU */
|
|
hw_tsf = ath5k_hw_get_tsf64(ah);
|
|
hw_tu = TSF_TO_TU(hw_tsf);
|
|
|
|
#define FUDGE 3
|
|
/* we use FUDGE to make sure the next TBTT is ahead of the current TU */
|
|
if (bc_tsf == -1) {
|
|
/*
|
|
* no beacons received, called internally.
|
|
* just need to refresh timers based on HW TSF.
|
|
*/
|
|
nexttbtt = roundup(hw_tu + FUDGE, intval);
|
|
} else if (bc_tsf == 0) {
|
|
/*
|
|
* no beacon received, probably called by ath5k_reset_tsf().
|
|
* reset TSF to start with 0.
|
|
*/
|
|
nexttbtt = intval;
|
|
intval |= AR5K_BEACON_RESET_TSF;
|
|
} else if (bc_tsf > hw_tsf) {
|
|
/*
|
|
* beacon received, SW merge happend but HW TSF not yet updated.
|
|
* not possible to reconfigure timers yet, but next time we
|
|
* receive a beacon with the same BSSID, the hardware will
|
|
* automatically update the TSF and then we need to reconfigure
|
|
* the timers.
|
|
*/
|
|
ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
|
|
"need to wait for HW TSF sync\n");
|
|
return;
|
|
} else {
|
|
/*
|
|
* most important case for beacon synchronization between STA.
|
|
*
|
|
* beacon received and HW TSF has been already updated by HW.
|
|
* update next TBTT based on the TSF of the beacon, but make
|
|
* sure it is ahead of our local TSF timer.
|
|
*/
|
|
nexttbtt = bc_tu + roundup(hw_tu + FUDGE - bc_tu, intval);
|
|
}
|
|
#undef FUDGE
|
|
|
|
sc->nexttbtt = nexttbtt;
|
|
|
|
intval |= AR5K_BEACON_ENA;
|
|
ath5k_hw_init_beacon(ah, nexttbtt, intval);
|
|
|
|
/*
|
|
* debugging output last in order to preserve the time critical aspect
|
|
* of this function
|
|
*/
|
|
if (bc_tsf == -1)
|
|
ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
|
|
"reconfigured timers based on HW TSF\n");
|
|
else if (bc_tsf == 0)
|
|
ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
|
|
"reset HW TSF and timers\n");
|
|
else
|
|
ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
|
|
"updated timers based on beacon TSF\n");
|
|
|
|
ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
|
|
"bc_tsf %llx hw_tsf %llx bc_tu %u hw_tu %u nexttbtt %u\n",
|
|
(unsigned long long) bc_tsf,
|
|
(unsigned long long) hw_tsf, bc_tu, hw_tu, nexttbtt);
|
|
ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "intval %u %s %s\n",
|
|
intval & AR5K_BEACON_PERIOD,
|
|
intval & AR5K_BEACON_ENA ? "AR5K_BEACON_ENA" : "",
|
|
intval & AR5K_BEACON_RESET_TSF ? "AR5K_BEACON_RESET_TSF" : "");
|
|
}
|
|
|
|
|
|
/**
|
|
* ath5k_beacon_config - Configure the beacon queues and interrupts
|
|
*
|
|
* @sc: struct ath5k_softc pointer we are operating on
|
|
*
|
|
* In IBSS mode we use a self-linked tx descriptor if possible. We enable SWBA
|
|
* interrupts to detect TSF updates only.
|
|
*/
|
|
static void
|
|
ath5k_beacon_config(struct ath5k_softc *sc)
|
|
{
|
|
struct ath5k_hw *ah = sc->ah;
|
|
unsigned long flags;
|
|
|
|
ath5k_hw_set_imr(ah, 0);
|
|
sc->bmisscount = 0;
|
|
sc->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA);
|
|
|
|
if (sc->opmode == NL80211_IFTYPE_ADHOC ||
|
|
sc->opmode == NL80211_IFTYPE_MESH_POINT ||
|
|
sc->opmode == NL80211_IFTYPE_AP) {
|
|
/*
|
|
* In IBSS mode we use a self-linked tx descriptor and let the
|
|
* hardware send the beacons automatically. We have to load it
|
|
* only once here.
|
|
* We use the SWBA interrupt only to keep track of the beacon
|
|
* timers in order to detect automatic TSF updates.
|
|
*/
|
|
ath5k_beaconq_config(sc);
|
|
|
|
sc->imask |= AR5K_INT_SWBA;
|
|
|
|
if (sc->opmode == NL80211_IFTYPE_ADHOC) {
|
|
if (ath5k_hw_hasveol(ah)) {
|
|
spin_lock_irqsave(&sc->block, flags);
|
|
ath5k_beacon_send(sc);
|
|
spin_unlock_irqrestore(&sc->block, flags);
|
|
}
|
|
} else
|
|
ath5k_beacon_update_timers(sc, -1);
|
|
}
|
|
|
|
ath5k_hw_set_imr(ah, sc->imask);
|
|
}
|
|
|
|
|
|
/********************\
|
|
* Interrupt handling *
|
|
\********************/
|
|
|
|
static int
|
|
ath5k_init(struct ath5k_softc *sc)
|
|
{
|
|
struct ath5k_hw *ah = sc->ah;
|
|
int ret, i;
|
|
|
|
mutex_lock(&sc->lock);
|
|
|
|
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mode %d\n", sc->opmode);
|
|
|
|
/*
|
|
* Stop anything previously setup. This is safe
|
|
* no matter this is the first time through or not.
|
|
*/
|
|
ath5k_stop_locked(sc);
|
|
|
|
/*
|
|
* The basic interface to setting the hardware in a good
|
|
* state is ``reset''. On return the hardware is known to
|
|
* be powered up and with interrupts disabled. This must
|
|
* be followed by initialization of the appropriate bits
|
|
* and then setup of the interrupt mask.
|
|
*/
|
|
sc->curchan = sc->hw->conf.channel;
|
|
sc->curband = &sc->sbands[sc->curchan->band];
|
|
sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL |
|
|
AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL |
|
|
AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB;
|
|
ret = ath5k_reset(sc, false, false);
|
|
if (ret)
|
|
goto done;
|
|
|
|
/*
|
|
* Reset the key cache since some parts do not reset the
|
|
* contents on initial power up or resume from suspend.
|
|
*/
|
|
for (i = 0; i < AR5K_KEYTABLE_SIZE; i++)
|
|
ath5k_hw_reset_key(ah, i);
|
|
|
|
/* Set ack to be sent at low bit-rates */
|
|
ath5k_hw_set_ack_bitrate_high(ah, false);
|
|
|
|
mod_timer(&sc->calib_tim, round_jiffies(jiffies +
|
|
msecs_to_jiffies(ath5k_calinterval * 1000)));
|
|
|
|
ret = 0;
|
|
done:
|
|
mmiowb();
|
|
mutex_unlock(&sc->lock);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
ath5k_stop_locked(struct ath5k_softc *sc)
|
|
{
|
|
struct ath5k_hw *ah = sc->ah;
|
|
|
|
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "invalid %u\n",
|
|
test_bit(ATH_STAT_INVALID, sc->status));
|
|
|
|
/*
|
|
* Shutdown the hardware and driver:
|
|
* stop output from above
|
|
* disable interrupts
|
|
* turn off timers
|
|
* turn off the radio
|
|
* clear transmit machinery
|
|
* clear receive machinery
|
|
* drain and release tx queues
|
|
* reclaim beacon resources
|
|
* power down hardware
|
|
*
|
|
* Note that some of this work is not possible if the
|
|
* hardware is gone (invalid).
|
|
*/
|
|
ieee80211_stop_queues(sc->hw);
|
|
|
|
if (!test_bit(ATH_STAT_INVALID, sc->status)) {
|
|
ath5k_led_off(sc);
|
|
ath5k_hw_set_imr(ah, 0);
|
|
synchronize_irq(sc->pdev->irq);
|
|
}
|
|
ath5k_txq_cleanup(sc);
|
|
if (!test_bit(ATH_STAT_INVALID, sc->status)) {
|
|
ath5k_rx_stop(sc);
|
|
ath5k_hw_phy_disable(ah);
|
|
} else
|
|
sc->rxlink = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Stop the device, grabbing the top-level lock to protect
|
|
* against concurrent entry through ath5k_init (which can happen
|
|
* if another thread does a system call and the thread doing the
|
|
* stop is preempted).
|
|
*/
|
|
static int
|
|
ath5k_stop_hw(struct ath5k_softc *sc)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&sc->lock);
|
|
ret = ath5k_stop_locked(sc);
|
|
if (ret == 0 && !test_bit(ATH_STAT_INVALID, sc->status)) {
|
|
/*
|
|
* Set the chip in full sleep mode. Note that we are
|
|
* careful to do this only when bringing the interface
|
|
* completely to a stop. When the chip is in this state
|
|
* it must be carefully woken up or references to
|
|
* registers in the PCI clock domain may freeze the bus
|
|
* (and system). This varies by chip and is mostly an
|
|
* issue with newer parts that go to sleep more quickly.
|
|
*/
|
|
if (sc->ah->ah_mac_srev >= 0x78) {
|
|
/*
|
|
* XXX
|
|
* don't put newer MAC revisions > 7.8 to sleep because
|
|
* of the above mentioned problems
|
|
*/
|
|
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mac version > 7.8, "
|
|
"not putting device to sleep\n");
|
|
} else {
|
|
ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
|
|
"putting device to full sleep\n");
|
|
ath5k_hw_set_power(sc->ah, AR5K_PM_FULL_SLEEP, true, 0);
|
|
}
|
|
}
|
|
ath5k_txbuf_free(sc, sc->bbuf);
|
|
|
|
mmiowb();
|
|
mutex_unlock(&sc->lock);
|
|
|
|
del_timer_sync(&sc->calib_tim);
|
|
tasklet_kill(&sc->rxtq);
|
|
tasklet_kill(&sc->txtq);
|
|
tasklet_kill(&sc->restq);
|
|
tasklet_kill(&sc->beacontq);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t
|
|
ath5k_intr(int irq, void *dev_id)
|
|
{
|
|
struct ath5k_softc *sc = dev_id;
|
|
struct ath5k_hw *ah = sc->ah;
|
|
enum ath5k_int status;
|
|
unsigned int counter = 1000;
|
|
|
|
if (unlikely(test_bit(ATH_STAT_INVALID, sc->status) ||
|
|
!ath5k_hw_is_intr_pending(ah)))
|
|
return IRQ_NONE;
|
|
|
|
do {
|
|
ath5k_hw_get_isr(ah, &status); /* NB: clears IRQ too */
|
|
ATH5K_DBG(sc, ATH5K_DEBUG_INTR, "status 0x%x/0x%x\n",
|
|
status, sc->imask);
|
|
if (unlikely(status & AR5K_INT_FATAL)) {
|
|
/*
|
|
* Fatal errors are unrecoverable.
|
|
* Typically these are caused by DMA errors.
|
|
*/
|
|
tasklet_schedule(&sc->restq);
|
|
} else if (unlikely(status & AR5K_INT_RXORN)) {
|
|
tasklet_schedule(&sc->restq);
|
|
} else {
|
|
if (status & AR5K_INT_SWBA) {
|
|
tasklet_schedule(&sc->beacontq);
|
|
}
|
|
if (status & AR5K_INT_RXEOL) {
|
|
/*
|
|
* NB: the hardware should re-read the link when
|
|
* RXE bit is written, but it doesn't work at
|
|
* least on older hardware revs.
|
|
*/
|
|
sc->rxlink = NULL;
|
|
}
|
|
if (status & AR5K_INT_TXURN) {
|
|
/* bump tx trigger level */
|
|
ath5k_hw_update_tx_triglevel(ah, true);
|
|
}
|
|
if (status & (AR5K_INT_RXOK | AR5K_INT_RXERR))
|
|
tasklet_schedule(&sc->rxtq);
|
|
if (status & (AR5K_INT_TXOK | AR5K_INT_TXDESC
|
|
| AR5K_INT_TXERR | AR5K_INT_TXEOL))
|
|
tasklet_schedule(&sc->txtq);
|
|
if (status & AR5K_INT_BMISS) {
|
|
/* TODO */
|
|
}
|
|
if (status & AR5K_INT_MIB) {
|
|
/*
|
|
* These stats are also used for ANI i think
|
|
* so how about updating them more often ?
|
|
*/
|
|
ath5k_hw_update_mib_counters(ah, &sc->ll_stats);
|
|
}
|
|
}
|
|
} while (ath5k_hw_is_intr_pending(ah) && counter-- > 0);
|
|
|
|
if (unlikely(!counter))
|
|
ATH5K_WARN(sc, "too many interrupts, giving up for now\n");
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void
|
|
ath5k_tasklet_reset(unsigned long data)
|
|
{
|
|
struct ath5k_softc *sc = (void *)data;
|
|
|
|
ath5k_reset_wake(sc);
|
|
}
|
|
|
|
/*
|
|
* Periodically recalibrate the PHY to account
|
|
* for temperature/environment changes.
|
|
*/
|
|
static void
|
|
ath5k_calibrate(unsigned long data)
|
|
{
|
|
struct ath5k_softc *sc = (void *)data;
|
|
struct ath5k_hw *ah = sc->ah;
|
|
|
|
ATH5K_DBG(sc, ATH5K_DEBUG_CALIBRATE, "channel %u/%x\n",
|
|
ieee80211_frequency_to_channel(sc->curchan->center_freq),
|
|
sc->curchan->hw_value);
|
|
|
|
if (ath5k_hw_gainf_calibrate(ah) == AR5K_RFGAIN_NEED_CHANGE) {
|
|
/*
|
|
* Rfgain is out of bounds, reset the chip
|
|
* to load new gain values.
|
|
*/
|
|
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "calibration, resetting\n");
|
|
ath5k_reset_wake(sc);
|
|
}
|
|
if (ath5k_hw_phy_calibrate(ah, sc->curchan))
|
|
ATH5K_ERR(sc, "calibration of channel %u failed\n",
|
|
ieee80211_frequency_to_channel(
|
|
sc->curchan->center_freq));
|
|
|
|
mod_timer(&sc->calib_tim, round_jiffies(jiffies +
|
|
msecs_to_jiffies(ath5k_calinterval * 1000)));
|
|
}
|
|
|
|
|
|
|
|
/***************\
|
|
* LED functions *
|
|
\***************/
|
|
|
|
static void
|
|
ath5k_led_enable(struct ath5k_softc *sc)
|
|
{
|
|
if (test_bit(ATH_STAT_LEDSOFT, sc->status)) {
|
|
ath5k_hw_set_gpio_output(sc->ah, sc->led_pin);
|
|
ath5k_led_off(sc);
|
|
}
|
|
}
|
|
|
|
static void
|
|
ath5k_led_on(struct ath5k_softc *sc)
|
|
{
|
|
if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
|
|
return;
|
|
ath5k_hw_set_gpio(sc->ah, sc->led_pin, sc->led_on);
|
|
}
|
|
|
|
static void
|
|
ath5k_led_off(struct ath5k_softc *sc)
|
|
{
|
|
if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
|
|
return;
|
|
ath5k_hw_set_gpio(sc->ah, sc->led_pin, !sc->led_on);
|
|
}
|
|
|
|
static void
|
|
ath5k_led_brightness_set(struct led_classdev *led_dev,
|
|
enum led_brightness brightness)
|
|
{
|
|
struct ath5k_led *led = container_of(led_dev, struct ath5k_led,
|
|
led_dev);
|
|
|
|
if (brightness == LED_OFF)
|
|
ath5k_led_off(led->sc);
|
|
else
|
|
ath5k_led_on(led->sc);
|
|
}
|
|
|
|
static int
|
|
ath5k_register_led(struct ath5k_softc *sc, struct ath5k_led *led,
|
|
const char *name, char *trigger)
|
|
{
|
|
int err;
|
|
|
|
led->sc = sc;
|
|
strncpy(led->name, name, sizeof(led->name));
|
|
led->led_dev.name = led->name;
|
|
led->led_dev.default_trigger = trigger;
|
|
led->led_dev.brightness_set = ath5k_led_brightness_set;
|
|
|
|
err = led_classdev_register(&sc->pdev->dev, &led->led_dev);
|
|
if (err) {
|
|
ATH5K_WARN(sc, "could not register LED %s\n", name);
|
|
led->sc = NULL;
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static void
|
|
ath5k_unregister_led(struct ath5k_led *led)
|
|
{
|
|
if (!led->sc)
|
|
return;
|
|
led_classdev_unregister(&led->led_dev);
|
|
ath5k_led_off(led->sc);
|
|
led->sc = NULL;
|
|
}
|
|
|
|
static void
|
|
ath5k_unregister_leds(struct ath5k_softc *sc)
|
|
{
|
|
ath5k_unregister_led(&sc->rx_led);
|
|
ath5k_unregister_led(&sc->tx_led);
|
|
}
|
|
|
|
|
|
static int
|
|
ath5k_init_leds(struct ath5k_softc *sc)
|
|
{
|
|
int ret = 0;
|
|
struct ieee80211_hw *hw = sc->hw;
|
|
struct pci_dev *pdev = sc->pdev;
|
|
char name[ATH5K_LED_MAX_NAME_LEN + 1];
|
|
|
|
/*
|
|
* Auto-enable soft led processing for IBM cards and for
|
|
* 5211 minipci cards.
|
|
*/
|
|
if (pdev->device == PCI_DEVICE_ID_ATHEROS_AR5212_IBM ||
|
|
pdev->device == PCI_DEVICE_ID_ATHEROS_AR5211) {
|
|
__set_bit(ATH_STAT_LEDSOFT, sc->status);
|
|
sc->led_pin = 0;
|
|
sc->led_on = 0; /* active low */
|
|
}
|
|
/* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */
|
|
if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) {
|
|
__set_bit(ATH_STAT_LEDSOFT, sc->status);
|
|
sc->led_pin = 1;
|
|
sc->led_on = 1; /* active high */
|
|
}
|
|
/*
|
|
* Pin 3 on Foxconn chips used in Acer Aspire One (0x105b:e008) and
|
|
* in emachines notebooks with AMBIT subsystem.
|
|
*/
|
|
if (pdev->subsystem_vendor == PCI_VENDOR_ID_FOXCONN ||
|
|
pdev->subsystem_vendor == PCI_VENDOR_ID_AMBIT) {
|
|
__set_bit(ATH_STAT_LEDSOFT, sc->status);
|
|
sc->led_pin = 3;
|
|
sc->led_on = 0; /* active low */
|
|
}
|
|
|
|
if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
|
|
goto out;
|
|
|
|
ath5k_led_enable(sc);
|
|
|
|
snprintf(name, sizeof(name), "ath5k-%s::rx", wiphy_name(hw->wiphy));
|
|
ret = ath5k_register_led(sc, &sc->rx_led, name,
|
|
ieee80211_get_rx_led_name(hw));
|
|
if (ret)
|
|
goto out;
|
|
|
|
snprintf(name, sizeof(name), "ath5k-%s::tx", wiphy_name(hw->wiphy));
|
|
ret = ath5k_register_led(sc, &sc->tx_led, name,
|
|
ieee80211_get_tx_led_name(hw));
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
|
|
/********************\
|
|
* Mac80211 functions *
|
|
\********************/
|
|
|
|
static int
|
|
ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
|
|
{
|
|
struct ath5k_softc *sc = hw->priv;
|
|
struct ath5k_buf *bf;
|
|
unsigned long flags;
|
|
int hdrlen;
|
|
int padsize;
|
|
|
|
ath5k_debug_dump_skb(sc, skb, "TX ", 1);
|
|
|
|
if (sc->opmode == NL80211_IFTYPE_MONITOR)
|
|
ATH5K_DBG(sc, ATH5K_DEBUG_XMIT, "tx in monitor (scan?)\n");
|
|
|
|
/*
|
|
* the hardware expects the header padded to 4 byte boundaries
|
|
* if this is not the case we add the padding after the header
|
|
*/
|
|
hdrlen = ieee80211_get_hdrlen_from_skb(skb);
|
|
padsize = ath5k_pad_size(hdrlen);
|
|
if (padsize) {
|
|
|
|
if (skb_headroom(skb) < padsize) {
|
|
ATH5K_ERR(sc, "tx hdrlen not %%4: %d not enough"
|
|
" headroom to pad %d\n", hdrlen, padsize);
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
skb_push(skb, padsize);
|
|
memmove(skb->data, skb->data+padsize, hdrlen);
|
|
}
|
|
|
|
spin_lock_irqsave(&sc->txbuflock, flags);
|
|
if (list_empty(&sc->txbuf)) {
|
|
ATH5K_ERR(sc, "no further txbuf available, dropping packet\n");
|
|
spin_unlock_irqrestore(&sc->txbuflock, flags);
|
|
ieee80211_stop_queue(hw, skb_get_queue_mapping(skb));
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
bf = list_first_entry(&sc->txbuf, struct ath5k_buf, list);
|
|
list_del(&bf->list);
|
|
sc->txbuf_len--;
|
|
if (list_empty(&sc->txbuf))
|
|
ieee80211_stop_queues(hw);
|
|
spin_unlock_irqrestore(&sc->txbuflock, flags);
|
|
|
|
bf->skb = skb;
|
|
|
|
if (ath5k_txbuf_setup(sc, bf)) {
|
|
bf->skb = NULL;
|
|
spin_lock_irqsave(&sc->txbuflock, flags);
|
|
list_add_tail(&bf->list, &sc->txbuf);
|
|
sc->txbuf_len++;
|
|
spin_unlock_irqrestore(&sc->txbuflock, flags);
|
|
dev_kfree_skb_any(skb);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
static int
|
|
ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel)
|
|
{
|
|
struct ath5k_hw *ah = sc->ah;
|
|
int ret;
|
|
|
|
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
|
|
|
|
if (stop) {
|
|
ath5k_hw_set_imr(ah, 0);
|
|
ath5k_txq_cleanup(sc);
|
|
ath5k_rx_stop(sc);
|
|
}
|
|
ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true);
|
|
if (ret) {
|
|
ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
/*
|
|
* This is needed only to setup initial state
|
|
* but it's best done after a reset.
|
|
*/
|
|
ath5k_hw_set_txpower_limit(sc->ah, 0);
|
|
|
|
ret = ath5k_rx_start(sc);
|
|
if (ret) {
|
|
ATH5K_ERR(sc, "can't start recv logic\n");
|
|
goto err;
|
|
}
|
|
|
|
/*
|
|
* Change channels and update the h/w rate map if we're switching;
|
|
* e.g. 11a to 11b/g.
|
|
*
|
|
* We may be doing a reset in response to an ioctl that changes the
|
|
* channel so update any state that might change as a result.
|
|
*
|
|
* XXX needed?
|
|
*/
|
|
/* ath5k_chan_change(sc, c); */
|
|
|
|
ath5k_beacon_config(sc);
|
|
/* intrs are enabled by ath5k_beacon_config */
|
|
|
|
return 0;
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
ath5k_reset_wake(struct ath5k_softc *sc)
|
|
{
|
|
int ret;
|
|
|
|
ret = ath5k_reset(sc, true, true);
|
|
if (!ret)
|
|
ieee80211_wake_queues(sc->hw);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ath5k_start(struct ieee80211_hw *hw)
|
|
{
|
|
return ath5k_init(hw->priv);
|
|
}
|
|
|
|
static void ath5k_stop(struct ieee80211_hw *hw)
|
|
{
|
|
ath5k_stop_hw(hw->priv);
|
|
}
|
|
|
|
static int ath5k_add_interface(struct ieee80211_hw *hw,
|
|
struct ieee80211_if_init_conf *conf)
|
|
{
|
|
struct ath5k_softc *sc = hw->priv;
|
|
int ret;
|
|
|
|
mutex_lock(&sc->lock);
|
|
if (sc->vif) {
|
|
ret = 0;
|
|
goto end;
|
|
}
|
|
|
|
sc->vif = conf->vif;
|
|
|
|
switch (conf->type) {
|
|
case NL80211_IFTYPE_AP:
|
|
case NL80211_IFTYPE_STATION:
|
|
case NL80211_IFTYPE_ADHOC:
|
|
case NL80211_IFTYPE_MESH_POINT:
|
|
case NL80211_IFTYPE_MONITOR:
|
|
sc->opmode = conf->type;
|
|
break;
|
|
default:
|
|
ret = -EOPNOTSUPP;
|
|
goto end;
|
|
}
|
|
|
|
/* Set to a reasonable value. Note that this will
|
|
* be set to mac80211's value at ath5k_config(). */
|
|
sc->bintval = 1000;
|
|
ath5k_hw_set_lladdr(sc->ah, conf->mac_addr);
|
|
|
|
ret = 0;
|
|
end:
|
|
mutex_unlock(&sc->lock);
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
ath5k_remove_interface(struct ieee80211_hw *hw,
|
|
struct ieee80211_if_init_conf *conf)
|
|
{
|
|
struct ath5k_softc *sc = hw->priv;
|
|
u8 mac[ETH_ALEN] = {};
|
|
|
|
mutex_lock(&sc->lock);
|
|
if (sc->vif != conf->vif)
|
|
goto end;
|
|
|
|
ath5k_hw_set_lladdr(sc->ah, mac);
|
|
sc->vif = NULL;
|
|
end:
|
|
mutex_unlock(&sc->lock);
|
|
}
|
|
|
|
/*
|
|
* TODO: Phy disable/diversity etc
|
|
*/
|
|
static int
|
|
ath5k_config(struct ieee80211_hw *hw, u32 changed)
|
|
{
|
|
struct ath5k_softc *sc = hw->priv;
|
|
struct ieee80211_conf *conf = &hw->conf;
|
|
int ret;
|
|
|
|
mutex_lock(&sc->lock);
|
|
|
|
sc->bintval = conf->beacon_int;
|
|
sc->power_level = conf->power_level;
|
|
|
|
ret = ath5k_chan_set(sc, conf->channel);
|
|
|
|
mutex_unlock(&sc->lock);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
|
|
struct ieee80211_if_conf *conf)
|
|
{
|
|
struct ath5k_softc *sc = hw->priv;
|
|
struct ath5k_hw *ah = sc->ah;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&sc->lock);
|
|
if (sc->vif != vif) {
|
|
ret = -EIO;
|
|
goto unlock;
|
|
}
|
|
if (conf->changed & IEEE80211_IFCC_BSSID && conf->bssid) {
|
|
/* Cache for later use during resets */
|
|
memcpy(ah->ah_bssid, conf->bssid, ETH_ALEN);
|
|
/* XXX: assoc id is set to 0 for now, mac80211 doesn't have
|
|
* a clean way of letting us retrieve this yet. */
|
|
ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
|
|
mmiowb();
|
|
}
|
|
if (conf->changed & IEEE80211_IFCC_BEACON &&
|
|
(vif->type == NL80211_IFTYPE_ADHOC ||
|
|
vif->type == NL80211_IFTYPE_MESH_POINT ||
|
|
vif->type == NL80211_IFTYPE_AP)) {
|
|
struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
|
|
if (!beacon) {
|
|
ret = -ENOMEM;
|
|
goto unlock;
|
|
}
|
|
ath5k_beacon_update(sc, beacon);
|
|
}
|
|
|
|
unlock:
|
|
mutex_unlock(&sc->lock);
|
|
return ret;
|
|
}
|
|
|
|
#define SUPPORTED_FIF_FLAGS \
|
|
FIF_PROMISC_IN_BSS | FIF_ALLMULTI | FIF_FCSFAIL | \
|
|
FIF_PLCPFAIL | FIF_CONTROL | FIF_OTHER_BSS | \
|
|
FIF_BCN_PRBRESP_PROMISC
|
|
/*
|
|
* o always accept unicast, broadcast, and multicast traffic
|
|
* o multicast traffic for all BSSIDs will be enabled if mac80211
|
|
* says it should be
|
|
* o maintain current state of phy ofdm or phy cck error reception.
|
|
* If the hardware detects any of these type of errors then
|
|
* ath5k_hw_get_rx_filter() will pass to us the respective
|
|
* hardware filters to be able to receive these type of frames.
|
|
* o probe request frames are accepted only when operating in
|
|
* hostap, adhoc, or monitor modes
|
|
* o enable promiscuous mode according to the interface state
|
|
* o accept beacons:
|
|
* - when operating in adhoc mode so the 802.11 layer creates
|
|
* node table entries for peers,
|
|
* - when operating in station mode for collecting rssi data when
|
|
* the station is otherwise quiet, or
|
|
* - when scanning
|
|
*/
|
|
static void ath5k_configure_filter(struct ieee80211_hw *hw,
|
|
unsigned int changed_flags,
|
|
unsigned int *new_flags,
|
|
int mc_count, struct dev_mc_list *mclist)
|
|
{
|
|
struct ath5k_softc *sc = hw->priv;
|
|
struct ath5k_hw *ah = sc->ah;
|
|
u32 mfilt[2], val, rfilt;
|
|
u8 pos;
|
|
int i;
|
|
|
|
mfilt[0] = 0;
|
|
mfilt[1] = 0;
|
|
|
|
/* Only deal with supported flags */
|
|
changed_flags &= SUPPORTED_FIF_FLAGS;
|
|
*new_flags &= SUPPORTED_FIF_FLAGS;
|
|
|
|
/* If HW detects any phy or radar errors, leave those filters on.
|
|
* Also, always enable Unicast, Broadcasts and Multicast
|
|
* XXX: move unicast, bssid broadcasts and multicast to mac80211 */
|
|
rfilt = (ath5k_hw_get_rx_filter(ah) & (AR5K_RX_FILTER_PHYERR)) |
|
|
(AR5K_RX_FILTER_UCAST | AR5K_RX_FILTER_BCAST |
|
|
AR5K_RX_FILTER_MCAST);
|
|
|
|
if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) {
|
|
if (*new_flags & FIF_PROMISC_IN_BSS) {
|
|
rfilt |= AR5K_RX_FILTER_PROM;
|
|
__set_bit(ATH_STAT_PROMISC, sc->status);
|
|
} else {
|
|
__clear_bit(ATH_STAT_PROMISC, sc->status);
|
|
}
|
|
}
|
|
|
|
/* Note, AR5K_RX_FILTER_MCAST is already enabled */
|
|
if (*new_flags & FIF_ALLMULTI) {
|
|
mfilt[0] = ~0;
|
|
mfilt[1] = ~0;
|
|
} else {
|
|
for (i = 0; i < mc_count; i++) {
|
|
if (!mclist)
|
|
break;
|
|
/* calculate XOR of eight 6-bit values */
|
|
val = get_unaligned_le32(mclist->dmi_addr + 0);
|
|
pos = (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
|
|
val = get_unaligned_le32(mclist->dmi_addr + 3);
|
|
pos ^= (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
|
|
pos &= 0x3f;
|
|
mfilt[pos / 32] |= (1 << (pos % 32));
|
|
/* XXX: we might be able to just do this instead,
|
|
* but not sure, needs testing, if we do use this we'd
|
|
* neet to inform below to not reset the mcast */
|
|
/* ath5k_hw_set_mcast_filterindex(ah,
|
|
* mclist->dmi_addr[5]); */
|
|
mclist = mclist->next;
|
|
}
|
|
}
|
|
|
|
/* This is the best we can do */
|
|
if (*new_flags & (FIF_FCSFAIL | FIF_PLCPFAIL))
|
|
rfilt |= AR5K_RX_FILTER_PHYERR;
|
|
|
|
/* FIF_BCN_PRBRESP_PROMISC really means to enable beacons
|
|
* and probes for any BSSID, this needs testing */
|
|
if (*new_flags & FIF_BCN_PRBRESP_PROMISC)
|
|
rfilt |= AR5K_RX_FILTER_BEACON | AR5K_RX_FILTER_PROBEREQ;
|
|
|
|
/* FIF_CONTROL doc says that if FIF_PROMISC_IN_BSS is not
|
|
* set we should only pass on control frames for this
|
|
* station. This needs testing. I believe right now this
|
|
* enables *all* control frames, which is OK.. but
|
|
* but we should see if we can improve on granularity */
|
|
if (*new_flags & FIF_CONTROL)
|
|
rfilt |= AR5K_RX_FILTER_CONTROL;
|
|
|
|
/* Additional settings per mode -- this is per ath5k */
|
|
|
|
/* XXX move these to mac80211, and add a beacon IFF flag to mac80211 */
|
|
|
|
if (sc->opmode == NL80211_IFTYPE_MONITOR)
|
|
rfilt |= AR5K_RX_FILTER_CONTROL | AR5K_RX_FILTER_BEACON |
|
|
AR5K_RX_FILTER_PROBEREQ | AR5K_RX_FILTER_PROM;
|
|
if (sc->opmode != NL80211_IFTYPE_STATION)
|
|
rfilt |= AR5K_RX_FILTER_PROBEREQ;
|
|
if (sc->opmode != NL80211_IFTYPE_AP &&
|
|
sc->opmode != NL80211_IFTYPE_MESH_POINT &&
|
|
test_bit(ATH_STAT_PROMISC, sc->status))
|
|
rfilt |= AR5K_RX_FILTER_PROM;
|
|
if ((sc->opmode == NL80211_IFTYPE_STATION && sc->assoc) ||
|
|
sc->opmode == NL80211_IFTYPE_ADHOC ||
|
|
sc->opmode == NL80211_IFTYPE_AP)
|
|
rfilt |= AR5K_RX_FILTER_BEACON;
|
|
if (sc->opmode == NL80211_IFTYPE_MESH_POINT)
|
|
rfilt |= AR5K_RX_FILTER_CONTROL | AR5K_RX_FILTER_BEACON |
|
|
AR5K_RX_FILTER_PROBEREQ | AR5K_RX_FILTER_PROM;
|
|
|
|
/* Set filters */
|
|
ath5k_hw_set_rx_filter(ah, rfilt);
|
|
|
|
/* Set multicast bits */
|
|
ath5k_hw_set_mcast_filter(ah, mfilt[0], mfilt[1]);
|
|
/* Set the cached hw filter flags, this will alter actually
|
|
* be set in HW */
|
|
sc->filter_flags = rfilt;
|
|
}
|
|
|
|
static int
|
|
ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
|
|
struct ieee80211_vif *vif, struct ieee80211_sta *sta,
|
|
struct ieee80211_key_conf *key)
|
|
{
|
|
struct ath5k_softc *sc = hw->priv;
|
|
int ret = 0;
|
|
|
|
if (modparam_nohwcrypt)
|
|
return -EOPNOTSUPP;
|
|
|
|
switch (key->alg) {
|
|
case ALG_WEP:
|
|
case ALG_TKIP:
|
|
break;
|
|
case ALG_CCMP:
|
|
return -EOPNOTSUPP;
|
|
default:
|
|
WARN_ON(1);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_lock(&sc->lock);
|
|
|
|
switch (cmd) {
|
|
case SET_KEY:
|
|
ret = ath5k_hw_set_key(sc->ah, key->keyidx, key,
|
|
sta ? sta->addr : NULL);
|
|
if (ret) {
|
|
ATH5K_ERR(sc, "can't set the key\n");
|
|
goto unlock;
|
|
}
|
|
__set_bit(key->keyidx, sc->keymap);
|
|
key->hw_key_idx = key->keyidx;
|
|
key->flags |= (IEEE80211_KEY_FLAG_GENERATE_IV |
|
|
IEEE80211_KEY_FLAG_GENERATE_MMIC);
|
|
break;
|
|
case DISABLE_KEY:
|
|
ath5k_hw_reset_key(sc->ah, key->keyidx);
|
|
__clear_bit(key->keyidx, sc->keymap);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
goto unlock;
|
|
}
|
|
|
|
unlock:
|
|
mmiowb();
|
|
mutex_unlock(&sc->lock);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
ath5k_get_stats(struct ieee80211_hw *hw,
|
|
struct ieee80211_low_level_stats *stats)
|
|
{
|
|
struct ath5k_softc *sc = hw->priv;
|
|
struct ath5k_hw *ah = sc->ah;
|
|
|
|
/* Force update */
|
|
ath5k_hw_update_mib_counters(ah, &sc->ll_stats);
|
|
|
|
memcpy(stats, &sc->ll_stats, sizeof(sc->ll_stats));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ath5k_get_tx_stats(struct ieee80211_hw *hw,
|
|
struct ieee80211_tx_queue_stats *stats)
|
|
{
|
|
struct ath5k_softc *sc = hw->priv;
|
|
|
|
memcpy(stats, &sc->tx_stats, sizeof(sc->tx_stats));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u64
|
|
ath5k_get_tsf(struct ieee80211_hw *hw)
|
|
{
|
|
struct ath5k_softc *sc = hw->priv;
|
|
|
|
return ath5k_hw_get_tsf64(sc->ah);
|
|
}
|
|
|
|
static void
|
|
ath5k_set_tsf(struct ieee80211_hw *hw, u64 tsf)
|
|
{
|
|
struct ath5k_softc *sc = hw->priv;
|
|
|
|
ath5k_hw_set_tsf64(sc->ah, tsf);
|
|
}
|
|
|
|
static void
|
|
ath5k_reset_tsf(struct ieee80211_hw *hw)
|
|
{
|
|
struct ath5k_softc *sc = hw->priv;
|
|
|
|
/*
|
|
* in IBSS mode we need to update the beacon timers too.
|
|
* this will also reset the TSF if we call it with 0
|
|
*/
|
|
if (sc->opmode == NL80211_IFTYPE_ADHOC)
|
|
ath5k_beacon_update_timers(sc, 0);
|
|
else
|
|
ath5k_hw_reset_tsf(sc->ah);
|
|
}
|
|
|
|
static int
|
|
ath5k_beacon_update(struct ath5k_softc *sc, struct sk_buff *skb)
|
|
{
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
ath5k_debug_dump_skb(sc, skb, "BC ", 1);
|
|
|
|
spin_lock_irqsave(&sc->block, flags);
|
|
ath5k_txbuf_free(sc, sc->bbuf);
|
|
sc->bbuf->skb = skb;
|
|
ret = ath5k_beacon_setup(sc, sc->bbuf);
|
|
if (ret)
|
|
sc->bbuf->skb = NULL;
|
|
spin_unlock_irqrestore(&sc->block, flags);
|
|
if (!ret) {
|
|
ath5k_beacon_config(sc);
|
|
mmiowb();
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
static void
|
|
set_beacon_filter(struct ieee80211_hw *hw, bool enable)
|
|
{
|
|
struct ath5k_softc *sc = hw->priv;
|
|
struct ath5k_hw *ah = sc->ah;
|
|
u32 rfilt;
|
|
rfilt = ath5k_hw_get_rx_filter(ah);
|
|
if (enable)
|
|
rfilt |= AR5K_RX_FILTER_BEACON;
|
|
else
|
|
rfilt &= ~AR5K_RX_FILTER_BEACON;
|
|
ath5k_hw_set_rx_filter(ah, rfilt);
|
|
sc->filter_flags = rfilt;
|
|
}
|
|
|
|
static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_bss_conf *bss_conf,
|
|
u32 changes)
|
|
{
|
|
struct ath5k_softc *sc = hw->priv;
|
|
if (changes & BSS_CHANGED_ASSOC) {
|
|
mutex_lock(&sc->lock);
|
|
sc->assoc = bss_conf->assoc;
|
|
if (sc->opmode == NL80211_IFTYPE_STATION)
|
|
set_beacon_filter(hw, sc->assoc);
|
|
mutex_unlock(&sc->lock);
|
|
}
|
|
}
|