86 lines
2.3 KiB
Plaintext
86 lines
2.3 KiB
Plaintext
Qualcomm Shared Memory Driver (SMD) binding
|
|
|
|
This binding describes the Qualcomm Shared Memory Driver, a fifo based
|
|
communication channel for sending data between the various subsystems in
|
|
Qualcomm platforms.
|
|
|
|
- compatible:
|
|
Usage: required
|
|
Value type: <stringlist>
|
|
Definition: must be "qcom,smd"
|
|
|
|
= EDGES
|
|
|
|
Each subnode of the SMD node represents a remote subsystem or a remote
|
|
processor of some sort - or in SMD language an "edge". The name of the edges
|
|
are not important.
|
|
The edge is described by the following properties:
|
|
|
|
- interrupts:
|
|
Usage: required
|
|
Value type: <prop-encoded-array>
|
|
Definition: should specify the IRQ used by the remote processor to
|
|
signal this processor about communication related updates
|
|
|
|
- qcom,ipc:
|
|
Usage: required
|
|
Value type: <prop-encoded-array>
|
|
Definition: three entries specifying the outgoing ipc bit used for
|
|
signaling the remote processor:
|
|
- phandle to a syscon node representing the apcs registers
|
|
- u32 representing offset to the register within the syscon
|
|
- u32 representing the ipc bit within the register
|
|
|
|
- qcom,smd-edge:
|
|
Usage: required
|
|
Value type: <u32>
|
|
Definition: the identifier of the remote processor in the smd channel
|
|
allocation table
|
|
|
|
- qcom,remote-pid:
|
|
Usage: optional
|
|
Value type: <u32>
|
|
Definition: the identifier for the remote processor as known by the rest
|
|
of the system.
|
|
|
|
= SMD DEVICES
|
|
|
|
In turn, subnodes of the "edges" represent devices tied to SMD channels on that
|
|
"edge". The names of the devices are not important. The properties of these
|
|
nodes are defined by the individual bindings for the SMD devices - but must
|
|
contain the following property:
|
|
|
|
- qcom,smd-channels:
|
|
Usage: required
|
|
Value type: <stringlist>
|
|
Definition: a list of channels tied to this device, used for matching
|
|
the device to channels
|
|
|
|
= EXAMPLE
|
|
|
|
The following example represents a smd node, with one edge representing the
|
|
"rpm" subsystem. For the "rpm" subsystem we have a device tied to the
|
|
"rpm_request" channel.
|
|
|
|
apcs: syscon@f9011000 {
|
|
compatible = "syscon";
|
|
reg = <0xf9011000 0x1000>;
|
|
};
|
|
|
|
smd {
|
|
compatible = "qcom,smd";
|
|
|
|
rpm {
|
|
interrupts = <0 168 1>;
|
|
qcom,ipc = <&apcs 8 0>;
|
|
qcom,smd-edge = <15>;
|
|
|
|
rpm_requests {
|
|
compatible = "qcom,rpm-msm8974";
|
|
qcom,smd-channels = "rpm_requests";
|
|
|
|
...
|
|
};
|
|
};
|
|
};
|