35b464e32c
The DISPLAY_CLEAR command on the NewHaven NHD-0220DZW-AG5 display
does NOT change the DDRAM address to 00h (home position) like the
standard Hitachi HD44780 controller. As a consequence, the starting
position of the initial string LCD_INIT_TEXT is not guaranteed to be
at 0,0 depending on where the cursor was before the DISPLAY_CLEAR
command.
Extract of DISPLAY_CLEAR command from datasheets of:
Hitachi HD44780:
... It then sets DDRAM address 0 into the address counter...
NewHaven NHD-0220DZW-AG5 datasheet:
... This instruction does not change the DDRAM Address
Move the cursor home after sending DISPLAY_CLEAR command to support
non-standard LCDs.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: David Reaver <me@davidreaver.com>
Link: https://lore.kernel.org/r/20230722180925.1408885-1-hugo@hugovil.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
||
|---|---|---|
| .. | ||
| Kconfig | ||
| Makefile | ||
| arm-charlcd.c | ||
| cfag12864b.c | ||
| cfag12864bfb.c | ||
| charlcd.c | ||
| charlcd.h | ||
| hd44780.c | ||
| hd44780_common.c | ||
| hd44780_common.h | ||
| ht16k33.c | ||
| img-ascii-lcd.c | ||
| ks0108.c | ||
| lcd2s.c | ||
| line-display.c | ||
| line-display.h | ||
| panel.c | ||