308 lines
8.1 KiB
C
308 lines
8.1 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* GPIO driver for the ACCES 104-IDI-48 family
|
|
* Copyright (C) 2015 William Breathitt Gray
|
|
*
|
|
* This driver supports the following ACCES devices: 104-IDI-48A,
|
|
* 104-IDI-48AC, 104-IDI-48B, and 104-IDI-48BC.
|
|
*/
|
|
#include <linux/bits.h>
|
|
#include <linux/device.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/io.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irqdesc.h>
|
|
#include <linux/isa.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/types.h>
|
|
|
|
#include "gpio-i8255.h"
|
|
|
|
MODULE_IMPORT_NS(I8255);
|
|
|
|
#define IDI_48_EXTENT 8
|
|
#define MAX_NUM_IDI_48 max_num_isa_dev(IDI_48_EXTENT)
|
|
|
|
static unsigned int base[MAX_NUM_IDI_48];
|
|
static unsigned int num_idi_48;
|
|
module_param_hw_array(base, uint, ioport, &num_idi_48, 0);
|
|
MODULE_PARM_DESC(base, "ACCES 104-IDI-48 base addresses");
|
|
|
|
static unsigned int irq[MAX_NUM_IDI_48];
|
|
module_param_hw_array(irq, uint, irq, NULL, 0);
|
|
MODULE_PARM_DESC(irq, "ACCES 104-IDI-48 interrupt line numbers");
|
|
|
|
/**
|
|
* struct idi_48_reg - device register structure
|
|
* @port0: Port 0 Inputs
|
|
* @unused: Unused
|
|
* @port1: Port 1 Inputs
|
|
* @irq: Read: IRQ Status Register/IRQ Clear
|
|
* Write: IRQ Enable/Disable
|
|
*/
|
|
struct idi_48_reg {
|
|
u8 port0[3];
|
|
u8 unused;
|
|
u8 port1[3];
|
|
u8 irq;
|
|
};
|
|
|
|
/**
|
|
* struct idi_48_gpio - GPIO device private data structure
|
|
* @chip: instance of the gpio_chip
|
|
* @lock: synchronization lock to prevent I/O race conditions
|
|
* @irq_mask: input bits affected by interrupts
|
|
* @reg: I/O address offset for the device registers
|
|
* @cos_enb: Change-Of-State IRQ enable boundaries mask
|
|
*/
|
|
struct idi_48_gpio {
|
|
struct gpio_chip chip;
|
|
spinlock_t lock;
|
|
unsigned char irq_mask[6];
|
|
struct idi_48_reg __iomem *reg;
|
|
unsigned char cos_enb;
|
|
};
|
|
|
|
static int idi_48_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
return GPIO_LINE_DIRECTION_IN;
|
|
}
|
|
|
|
static int idi_48_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int idi_48_gpio_get(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
struct idi_48_gpio *const idi48gpio = gpiochip_get_data(chip);
|
|
void __iomem *const ppi = idi48gpio->reg;
|
|
|
|
return i8255_get(ppi, offset);
|
|
}
|
|
|
|
static int idi_48_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
|
|
unsigned long *bits)
|
|
{
|
|
struct idi_48_gpio *const idi48gpio = gpiochip_get_data(chip);
|
|
void __iomem *const ppi = idi48gpio->reg;
|
|
|
|
i8255_get_multiple(ppi, mask, bits, chip->ngpio);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void idi_48_irq_ack(struct irq_data *data)
|
|
{
|
|
}
|
|
|
|
static void idi_48_irq_mask(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct idi_48_gpio *const idi48gpio = gpiochip_get_data(chip);
|
|
const unsigned int offset = irqd_to_hwirq(data);
|
|
const unsigned long boundary = offset / 8;
|
|
const unsigned long mask = BIT(offset % 8);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&idi48gpio->lock, flags);
|
|
|
|
idi48gpio->irq_mask[boundary] &= ~mask;
|
|
|
|
/* Exit early if there are still input lines with IRQ unmasked */
|
|
if (idi48gpio->irq_mask[boundary])
|
|
goto exit;
|
|
|
|
idi48gpio->cos_enb &= ~BIT(boundary);
|
|
|
|
iowrite8(idi48gpio->cos_enb, &idi48gpio->reg->irq);
|
|
|
|
exit:
|
|
spin_unlock_irqrestore(&idi48gpio->lock, flags);
|
|
}
|
|
|
|
static void idi_48_irq_unmask(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct idi_48_gpio *const idi48gpio = gpiochip_get_data(chip);
|
|
const unsigned int offset = irqd_to_hwirq(data);
|
|
const unsigned long boundary = offset / 8;
|
|
const unsigned long mask = BIT(offset % 8);
|
|
unsigned int prev_irq_mask;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&idi48gpio->lock, flags);
|
|
|
|
prev_irq_mask = idi48gpio->irq_mask[boundary];
|
|
|
|
idi48gpio->irq_mask[boundary] |= mask;
|
|
|
|
/* Exit early if IRQ was already unmasked for this boundary */
|
|
if (prev_irq_mask)
|
|
goto exit;
|
|
|
|
idi48gpio->cos_enb |= BIT(boundary);
|
|
|
|
iowrite8(idi48gpio->cos_enb, &idi48gpio->reg->irq);
|
|
|
|
exit:
|
|
spin_unlock_irqrestore(&idi48gpio->lock, flags);
|
|
}
|
|
|
|
static int idi_48_irq_set_type(struct irq_data *data, unsigned int flow_type)
|
|
{
|
|
/* The only valid irq types are none and both-edges */
|
|
if (flow_type != IRQ_TYPE_NONE &&
|
|
(flow_type & IRQ_TYPE_EDGE_BOTH) != IRQ_TYPE_EDGE_BOTH)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_chip idi_48_irqchip = {
|
|
.name = "104-idi-48",
|
|
.irq_ack = idi_48_irq_ack,
|
|
.irq_mask = idi_48_irq_mask,
|
|
.irq_unmask = idi_48_irq_unmask,
|
|
.irq_set_type = idi_48_irq_set_type
|
|
};
|
|
|
|
static irqreturn_t idi_48_irq_handler(int irq, void *dev_id)
|
|
{
|
|
struct idi_48_gpio *const idi48gpio = dev_id;
|
|
unsigned long cos_status;
|
|
unsigned long boundary;
|
|
unsigned long irq_mask;
|
|
unsigned long bit_num;
|
|
unsigned long gpio;
|
|
struct gpio_chip *const chip = &idi48gpio->chip;
|
|
|
|
spin_lock(&idi48gpio->lock);
|
|
|
|
cos_status = ioread8(&idi48gpio->reg->irq);
|
|
|
|
/* IRQ Status (bit 6) is active low (0 = IRQ generated by device) */
|
|
if (cos_status & BIT(6)) {
|
|
spin_unlock(&idi48gpio->lock);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
/* Bit 0-5 indicate which Change-Of-State boundary triggered the IRQ */
|
|
cos_status &= 0x3F;
|
|
|
|
for_each_set_bit(boundary, &cos_status, 6) {
|
|
irq_mask = idi48gpio->irq_mask[boundary];
|
|
|
|
for_each_set_bit(bit_num, &irq_mask, 8) {
|
|
gpio = bit_num + boundary * 8;
|
|
|
|
generic_handle_domain_irq(chip->irq.domain,
|
|
gpio);
|
|
}
|
|
}
|
|
|
|
spin_unlock(&idi48gpio->lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#define IDI48_NGPIO 48
|
|
static const char *idi48_names[IDI48_NGPIO] = {
|
|
"Bit 0 A", "Bit 1 A", "Bit 2 A", "Bit 3 A", "Bit 4 A", "Bit 5 A",
|
|
"Bit 6 A", "Bit 7 A", "Bit 8 A", "Bit 9 A", "Bit 10 A", "Bit 11 A",
|
|
"Bit 12 A", "Bit 13 A", "Bit 14 A", "Bit 15 A", "Bit 16 A", "Bit 17 A",
|
|
"Bit 18 A", "Bit 19 A", "Bit 20 A", "Bit 21 A", "Bit 22 A", "Bit 23 A",
|
|
"Bit 0 B", "Bit 1 B", "Bit 2 B", "Bit 3 B", "Bit 4 B", "Bit 5 B",
|
|
"Bit 6 B", "Bit 7 B", "Bit 8 B", "Bit 9 B", "Bit 10 B", "Bit 11 B",
|
|
"Bit 12 B", "Bit 13 B", "Bit 14 B", "Bit 15 B", "Bit 16 B", "Bit 17 B",
|
|
"Bit 18 B", "Bit 19 B", "Bit 20 B", "Bit 21 B", "Bit 22 B", "Bit 23 B"
|
|
};
|
|
|
|
static int idi_48_irq_init_hw(struct gpio_chip *gc)
|
|
{
|
|
struct idi_48_gpio *const idi48gpio = gpiochip_get_data(gc);
|
|
|
|
/* Disable IRQ by default */
|
|
iowrite8(0, &idi48gpio->reg->irq);
|
|
ioread8(&idi48gpio->reg->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int idi_48_probe(struct device *dev, unsigned int id)
|
|
{
|
|
struct idi_48_gpio *idi48gpio;
|
|
const char *const name = dev_name(dev);
|
|
struct gpio_irq_chip *girq;
|
|
int err;
|
|
|
|
idi48gpio = devm_kzalloc(dev, sizeof(*idi48gpio), GFP_KERNEL);
|
|
if (!idi48gpio)
|
|
return -ENOMEM;
|
|
|
|
if (!devm_request_region(dev, base[id], IDI_48_EXTENT, name)) {
|
|
dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
|
|
base[id], base[id] + IDI_48_EXTENT);
|
|
return -EBUSY;
|
|
}
|
|
|
|
idi48gpio->reg = devm_ioport_map(dev, base[id], IDI_48_EXTENT);
|
|
if (!idi48gpio->reg)
|
|
return -ENOMEM;
|
|
|
|
idi48gpio->chip.label = name;
|
|
idi48gpio->chip.parent = dev;
|
|
idi48gpio->chip.owner = THIS_MODULE;
|
|
idi48gpio->chip.base = -1;
|
|
idi48gpio->chip.ngpio = IDI48_NGPIO;
|
|
idi48gpio->chip.names = idi48_names;
|
|
idi48gpio->chip.get_direction = idi_48_gpio_get_direction;
|
|
idi48gpio->chip.direction_input = idi_48_gpio_direction_input;
|
|
idi48gpio->chip.get = idi_48_gpio_get;
|
|
idi48gpio->chip.get_multiple = idi_48_gpio_get_multiple;
|
|
|
|
girq = &idi48gpio->chip.irq;
|
|
girq->chip = &idi_48_irqchip;
|
|
/* This will let us handle the parent IRQ in the driver */
|
|
girq->parent_handler = NULL;
|
|
girq->num_parents = 0;
|
|
girq->parents = NULL;
|
|
girq->default_type = IRQ_TYPE_NONE;
|
|
girq->handler = handle_edge_irq;
|
|
girq->init_hw = idi_48_irq_init_hw;
|
|
|
|
spin_lock_init(&idi48gpio->lock);
|
|
|
|
err = devm_gpiochip_add_data(dev, &idi48gpio->chip, idi48gpio);
|
|
if (err) {
|
|
dev_err(dev, "GPIO registering failed (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
err = devm_request_irq(dev, irq[id], idi_48_irq_handler, IRQF_SHARED,
|
|
name, idi48gpio);
|
|
if (err) {
|
|
dev_err(dev, "IRQ handler registering failed (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct isa_driver idi_48_driver = {
|
|
.probe = idi_48_probe,
|
|
.driver = {
|
|
.name = "104-idi-48"
|
|
},
|
|
};
|
|
module_isa_driver(idi_48_driver, num_idi_48);
|
|
|
|
MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
|
|
MODULE_DESCRIPTION("ACCES 104-IDI-48 GPIO driver");
|
|
MODULE_LICENSE("GPL v2");
|