247 lines
7.6 KiB
C
247 lines
7.6 KiB
C
/*
|
|
* Copyright (C) 2012 Invensense, Inc.
|
|
*
|
|
* This software is licensed under the terms of the GNU General Public
|
|
* License version 2, as published by the Free Software Foundation, and
|
|
* may be copied, distributed, and modified under those terms.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
#include <linux/i2c.h>
|
|
#include <linux/kfifo.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/kfifo_buf.h>
|
|
#include <linux/iio/trigger.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/platform_data/invensense_mpu6050.h>
|
|
|
|
/**
|
|
* struct inv_mpu6050_reg_map - Notable registers.
|
|
* @sample_rate_div: Divider applied to gyro output rate.
|
|
* @lpf: Configures internal low pass filter.
|
|
* @user_ctrl: Enables/resets the FIFO.
|
|
* @fifo_en: Determines which data will appear in FIFO.
|
|
* @gyro_config: gyro config register.
|
|
* @accl_config: accel config register
|
|
* @fifo_count_h: Upper byte of FIFO count.
|
|
* @fifo_r_w: FIFO register.
|
|
* @raw_gyro: Address of first gyro register.
|
|
* @raw_accl: Address of first accel register.
|
|
* @temperature: temperature register
|
|
* @int_enable: Interrupt enable register.
|
|
* @pwr_mgmt_1: Controls chip's power state and clock source.
|
|
* @pwr_mgmt_2: Controls power state of individual sensors.
|
|
*/
|
|
struct inv_mpu6050_reg_map {
|
|
u8 sample_rate_div;
|
|
u8 lpf;
|
|
u8 user_ctrl;
|
|
u8 fifo_en;
|
|
u8 gyro_config;
|
|
u8 accl_config;
|
|
u8 fifo_count_h;
|
|
u8 fifo_r_w;
|
|
u8 raw_gyro;
|
|
u8 raw_accl;
|
|
u8 temperature;
|
|
u8 int_enable;
|
|
u8 pwr_mgmt_1;
|
|
u8 pwr_mgmt_2;
|
|
};
|
|
|
|
/*device enum */
|
|
enum inv_devices {
|
|
INV_MPU6050,
|
|
INV_NUM_PARTS
|
|
};
|
|
|
|
/**
|
|
* struct inv_mpu6050_chip_config - Cached chip configuration data.
|
|
* @fsr: Full scale range.
|
|
* @lpf: Digital low pass filter frequency.
|
|
* @accl_fs: accel full scale range.
|
|
* @enable: master enable state.
|
|
* @accl_fifo_enable: enable accel data output
|
|
* @gyro_fifo_enable: enable gyro data output
|
|
* @fifo_rate: FIFO update rate.
|
|
*/
|
|
struct inv_mpu6050_chip_config {
|
|
unsigned int fsr:2;
|
|
unsigned int lpf:3;
|
|
unsigned int accl_fs:2;
|
|
unsigned int enable:1;
|
|
unsigned int accl_fifo_enable:1;
|
|
unsigned int gyro_fifo_enable:1;
|
|
u16 fifo_rate;
|
|
};
|
|
|
|
/**
|
|
* struct inv_mpu6050_hw - Other important hardware information.
|
|
* @num_reg: Number of registers on device.
|
|
* @name: name of the chip.
|
|
* @reg: register map of the chip.
|
|
* @config: configuration of the chip.
|
|
*/
|
|
struct inv_mpu6050_hw {
|
|
u8 num_reg;
|
|
u8 *name;
|
|
const struct inv_mpu6050_reg_map *reg;
|
|
const struct inv_mpu6050_chip_config *config;
|
|
};
|
|
|
|
/*
|
|
* struct inv_mpu6050_state - Driver state variables.
|
|
* @TIMESTAMP_FIFO_SIZE: fifo size for timestamp.
|
|
* @trig: IIO trigger.
|
|
* @chip_config: Cached attribute information.
|
|
* @reg: Map of important registers.
|
|
* @hw: Other hardware-specific information.
|
|
* @chip_type: chip type.
|
|
* @time_stamp_lock: spin lock to time stamp.
|
|
* @client: i2c client handle.
|
|
* @plat_data: platform data.
|
|
* @timestamps: kfifo queue to store time stamp.
|
|
*/
|
|
struct inv_mpu6050_state {
|
|
#define TIMESTAMP_FIFO_SIZE 16
|
|
struct iio_trigger *trig;
|
|
struct inv_mpu6050_chip_config chip_config;
|
|
const struct inv_mpu6050_reg_map *reg;
|
|
const struct inv_mpu6050_hw *hw;
|
|
enum inv_devices chip_type;
|
|
spinlock_t time_stamp_lock;
|
|
struct i2c_client *client;
|
|
struct inv_mpu6050_platform_data plat_data;
|
|
DECLARE_KFIFO(timestamps, long long, TIMESTAMP_FIFO_SIZE);
|
|
};
|
|
|
|
/*register and associated bit definition*/
|
|
#define INV_MPU6050_REG_SAMPLE_RATE_DIV 0x19
|
|
#define INV_MPU6050_REG_CONFIG 0x1A
|
|
#define INV_MPU6050_REG_GYRO_CONFIG 0x1B
|
|
#define INV_MPU6050_REG_ACCEL_CONFIG 0x1C
|
|
|
|
#define INV_MPU6050_REG_FIFO_EN 0x23
|
|
#define INV_MPU6050_BIT_ACCEL_OUT 0x08
|
|
#define INV_MPU6050_BITS_GYRO_OUT 0x70
|
|
|
|
#define INV_MPU6050_REG_INT_ENABLE 0x38
|
|
#define INV_MPU6050_BIT_DATA_RDY_EN 0x01
|
|
#define INV_MPU6050_BIT_DMP_INT_EN 0x02
|
|
|
|
#define INV_MPU6050_REG_RAW_ACCEL 0x3B
|
|
#define INV_MPU6050_REG_TEMPERATURE 0x41
|
|
#define INV_MPU6050_REG_RAW_GYRO 0x43
|
|
|
|
#define INV_MPU6050_REG_USER_CTRL 0x6A
|
|
#define INV_MPU6050_BIT_FIFO_RST 0x04
|
|
#define INV_MPU6050_BIT_DMP_RST 0x08
|
|
#define INV_MPU6050_BIT_I2C_MST_EN 0x20
|
|
#define INV_MPU6050_BIT_FIFO_EN 0x40
|
|
#define INV_MPU6050_BIT_DMP_EN 0x80
|
|
|
|
#define INV_MPU6050_REG_PWR_MGMT_1 0x6B
|
|
#define INV_MPU6050_BIT_H_RESET 0x80
|
|
#define INV_MPU6050_BIT_SLEEP 0x40
|
|
#define INV_MPU6050_BIT_CLK_MASK 0x7
|
|
|
|
#define INV_MPU6050_REG_PWR_MGMT_2 0x6C
|
|
#define INV_MPU6050_BIT_PWR_ACCL_STBY 0x38
|
|
#define INV_MPU6050_BIT_PWR_GYRO_STBY 0x07
|
|
|
|
#define INV_MPU6050_REG_FIFO_COUNT_H 0x72
|
|
#define INV_MPU6050_REG_FIFO_R_W 0x74
|
|
|
|
#define INV_MPU6050_BYTES_PER_3AXIS_SENSOR 6
|
|
#define INV_MPU6050_FIFO_COUNT_BYTE 2
|
|
#define INV_MPU6050_FIFO_THRESHOLD 500
|
|
#define INV_MPU6050_POWER_UP_TIME 100
|
|
#define INV_MPU6050_TEMP_UP_TIME 100
|
|
#define INV_MPU6050_SENSOR_UP_TIME 30
|
|
#define INV_MPU6050_REG_UP_TIME 5
|
|
|
|
#define INV_MPU6050_TEMP_OFFSET 12421
|
|
#define INV_MPU6050_TEMP_SCALE 2941
|
|
#define INV_MPU6050_MAX_GYRO_FS_PARAM 3
|
|
#define INV_MPU6050_MAX_ACCL_FS_PARAM 3
|
|
#define INV_MPU6050_THREE_AXIS 3
|
|
#define INV_MPU6050_GYRO_CONFIG_FSR_SHIFT 3
|
|
#define INV_MPU6050_ACCL_CONFIG_FSR_SHIFT 3
|
|
|
|
/* 6 + 6 round up and plus 8 */
|
|
#define INV_MPU6050_OUTPUT_DATA_SIZE 24
|
|
|
|
/* init parameters */
|
|
#define INV_MPU6050_INIT_FIFO_RATE 50
|
|
#define INV_MPU6050_TIME_STAMP_TOR 5
|
|
#define INV_MPU6050_MAX_FIFO_RATE 1000
|
|
#define INV_MPU6050_MIN_FIFO_RATE 4
|
|
#define INV_MPU6050_ONE_K_HZ 1000
|
|
|
|
/* scan element definition */
|
|
enum inv_mpu6050_scan {
|
|
INV_MPU6050_SCAN_ACCL_X,
|
|
INV_MPU6050_SCAN_ACCL_Y,
|
|
INV_MPU6050_SCAN_ACCL_Z,
|
|
INV_MPU6050_SCAN_GYRO_X,
|
|
INV_MPU6050_SCAN_GYRO_Y,
|
|
INV_MPU6050_SCAN_GYRO_Z,
|
|
INV_MPU6050_SCAN_TIMESTAMP,
|
|
};
|
|
|
|
enum inv_mpu6050_filter_e {
|
|
INV_MPU6050_FILTER_256HZ_NOLPF2 = 0,
|
|
INV_MPU6050_FILTER_188HZ,
|
|
INV_MPU6050_FILTER_98HZ,
|
|
INV_MPU6050_FILTER_42HZ,
|
|
INV_MPU6050_FILTER_20HZ,
|
|
INV_MPU6050_FILTER_10HZ,
|
|
INV_MPU6050_FILTER_5HZ,
|
|
INV_MPU6050_FILTER_2100HZ_NOLPF,
|
|
NUM_MPU6050_FILTER
|
|
};
|
|
|
|
/* IIO attribute address */
|
|
enum INV_MPU6050_IIO_ATTR_ADDR {
|
|
ATTR_GYRO_MATRIX,
|
|
ATTR_ACCL_MATRIX,
|
|
};
|
|
|
|
enum inv_mpu6050_accl_fs_e {
|
|
INV_MPU6050_FS_02G = 0,
|
|
INV_MPU6050_FS_04G,
|
|
INV_MPU6050_FS_08G,
|
|
INV_MPU6050_FS_16G,
|
|
NUM_ACCL_FSR
|
|
};
|
|
|
|
enum inv_mpu6050_fsr_e {
|
|
INV_MPU6050_FSR_250DPS = 0,
|
|
INV_MPU6050_FSR_500DPS,
|
|
INV_MPU6050_FSR_1000DPS,
|
|
INV_MPU6050_FSR_2000DPS,
|
|
NUM_MPU6050_FSR
|
|
};
|
|
|
|
enum inv_mpu6050_clock_sel_e {
|
|
INV_CLK_INTERNAL = 0,
|
|
INV_CLK_PLL,
|
|
NUM_CLK
|
|
};
|
|
|
|
irqreturn_t inv_mpu6050_irq_handler(int irq, void *p);
|
|
irqreturn_t inv_mpu6050_read_fifo(int irq, void *p);
|
|
int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev);
|
|
void inv_mpu6050_remove_trigger(struct inv_mpu6050_state *st);
|
|
int inv_reset_fifo(struct iio_dev *indio_dev);
|
|
int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask);
|
|
int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 val);
|
|
int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on);
|