Stefan Brüns 103f3afe91 iio: adc: ina2xx: Adhere to documented ABI, use Ohm instead of uOhm ... According to the ABI documentation, the shunt resistor value should be specificied in Ohm. As this is also used/documented for the MAX9611, use the same for the INA2xx driver. This poses an ABI break for anyone actually altering the shunt value through the sysfs interface, it does not alter the default value nor a value set from the devicetree. Minor change: Fix comment, 1mA is 10^-3A. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>		2017-10-09 20:51:01 +01:00
..
accel	iio: accel: kxcjk1013: add support for KXTF9	2017-10-09 20:50:06 +01:00
adc	iio: adc: ina2xx: Adhere to documented ABI, use Ohm instead of uOhm	2017-10-09 20:51:01 +01:00
amplifiers	iio:amplifiers:ad8366 drop assign iio_info.driver_module and iio_trigger_ops.owner	2017-08-22 21:24:50 +01:00
buffer	iio: buffer-dmaengine: Add missing header buffer_impl.h	2017-06-13 20:56:05 +01:00
chemical	iio: chemical: ccs811: Add support for data ready trigger	2017-09-24 12:34:36 +01:00
common	Merge 4.14-rc4 into staging-next	2017-10-09 09:02:35 +02:00
counter	iio:stm32-lp-timer and ep93xx: drop assign iio_info.driver_module and iio_trigger_ops.owner	2017-09-26 09:38:57 +02:00
dac	iio: dac: ds4422/ds4424 dac driver	2017-10-09 20:49:39 +01:00
dummy	iio: dummy: evgen: use irq_sim	2017-10-09 20:50:34 +01:00
frequency	iio:frequency: drop assign iio_info.driver_module	2017-08-22 21:28:20 +01:00
gyro	iio:gyro: drop assign iio_info.driver_module and iio_trigger_ops.owner	2017-08-22 21:28:56 +01:00
health	iio:health: drop assign iio_info.driver_module and iio_trigger_ops.owner	2017-08-22 21:29:44 +01:00
humidity	iio:humidity: drop assign iio_info.driver_module and iio_trigger_ops.owner	2017-08-22 21:30:20 +01:00
imu	iio: imu: st_lsm6dsx: add FIFO ops data structure	2017-10-09 20:51:01 +01:00
light	iio: light: vl6180: Correct ALS scale for non-default gain/integration time	2017-10-09 20:50:21 +01:00
magnetometer	Merge 4.14-rc4 into staging-next	2017-10-09 09:02:35 +02:00
multiplexer	iio: multiplexer: add NULL check on devm_kzalloc() and devm_kmemdup() return values	2017-09-03 18:10:29 +01:00
orientation	iio:orientation: drop assign iio_info.driver_module	2017-08-22 21:33:36 +01:00
potentiometer	iio:potentiometer:max5487: Drop explicit setting of module owner	2017-09-03 18:10:27 +01:00
potentiostat	iio:potentiostat:lmp91000 drop assign iio_info.driver_module and iio_trigger_ops.owner	2017-08-22 21:34:48 +01:00
pressure	Merge 4.14-rc4 into staging-next	2017-10-09 09:02:35 +02:00
proximity	iio:proximity: drop assign iio_info.driver_module and iio_trigger_ops.owner	2017-08-22 22:14:51 +01:00
temperature	iio:temperature: drop assignment of iio_info.driver_module	2017-08-22 22:14:52 +01:00
trigger	Merge 4.14-rc4 into staging-next	2017-10-09 09:02:35 +02:00
Kconfig	iio: multiplexer: new iio category and iio-mux driver	2017-06-03 19:29:26 +09:00
Makefile	iio: multiplexer: new iio category and iio-mux driver	2017-06-03 19:29:26 +09:00
iio_core.h	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
iio_core_trigger.h	…
industrialio-buffer.c	sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>	2017-03-02 08:42:32 +01:00
industrialio-configfs.c	iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem	2015-12-05 16:25:30 +00:00
industrialio-core.c	Merge 4.14-rc4 into staging-next	2017-10-09 09:02:35 +02:00
industrialio-event.c	iio: iio_push_event(): Don't crash if the event interface is not registered	2016-09-10 16:40:44 +01:00
industrialio-sw-device.c	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c	iio: core: fix ptr_ret.cocci warnings	2016-01-20 17:09:18 -08:00
industrialio-trigger.c	iio:trigger: Remove necessity to have a trig->ops structure.	2017-08-22 21:20:28 +01:00
industrialio-triggered-event.c	iio: Support triggered events	2015-08-27 20:47:09 +01:00
inkern.c	First round of IIO new device support, features and cleanups for the 4.14 cycle.	2017-07-27 21:29:49 -07:00