360 lines
8.8 KiB
C
360 lines
8.8 KiB
C
/*
|
|
* linux/drivers/ide/pci/atiixp.c Version 0.01-bart2 Feb. 26, 2004
|
|
*
|
|
* Copyright (C) 2003 ATI Inc. <hyu@ati.com>
|
|
* Copyright (C) 2004 Bartlomiej Zolnierkiewicz
|
|
*
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/hdreg.h>
|
|
#include <linux/ide.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#define ATIIXP_IDE_PIO_TIMING 0x40
|
|
#define ATIIXP_IDE_MDMA_TIMING 0x44
|
|
#define ATIIXP_IDE_PIO_CONTROL 0x48
|
|
#define ATIIXP_IDE_PIO_MODE 0x4a
|
|
#define ATIIXP_IDE_UDMA_CONTROL 0x54
|
|
#define ATIIXP_IDE_UDMA_MODE 0x56
|
|
|
|
typedef struct {
|
|
u8 command_width;
|
|
u8 recover_width;
|
|
} atiixp_ide_timing;
|
|
|
|
static atiixp_ide_timing pio_timing[] = {
|
|
{ 0x05, 0x0d },
|
|
{ 0x04, 0x07 },
|
|
{ 0x03, 0x04 },
|
|
{ 0x02, 0x02 },
|
|
{ 0x02, 0x00 },
|
|
};
|
|
|
|
static atiixp_ide_timing mdma_timing[] = {
|
|
{ 0x07, 0x07 },
|
|
{ 0x02, 0x01 },
|
|
{ 0x02, 0x00 },
|
|
};
|
|
|
|
static int save_mdma_mode[4];
|
|
|
|
static DEFINE_SPINLOCK(atiixp_lock);
|
|
|
|
/**
|
|
* atiixp_dma_2_pio - return the PIO mode matching DMA
|
|
* @xfer_rate: transfer speed
|
|
*
|
|
* Returns the nearest equivalent PIO timing for the PIO or DMA
|
|
* mode requested by the controller.
|
|
*/
|
|
|
|
static u8 atiixp_dma_2_pio(u8 xfer_rate) {
|
|
switch(xfer_rate) {
|
|
case XFER_UDMA_6:
|
|
case XFER_UDMA_5:
|
|
case XFER_UDMA_4:
|
|
case XFER_UDMA_3:
|
|
case XFER_UDMA_2:
|
|
case XFER_UDMA_1:
|
|
case XFER_UDMA_0:
|
|
case XFER_MW_DMA_2:
|
|
case XFER_PIO_4:
|
|
return 4;
|
|
case XFER_MW_DMA_1:
|
|
case XFER_PIO_3:
|
|
return 3;
|
|
case XFER_SW_DMA_2:
|
|
case XFER_PIO_2:
|
|
return 2;
|
|
case XFER_MW_DMA_0:
|
|
case XFER_SW_DMA_1:
|
|
case XFER_SW_DMA_0:
|
|
case XFER_PIO_1:
|
|
case XFER_PIO_0:
|
|
case XFER_PIO_SLOW:
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static void atiixp_dma_host_on(ide_drive_t *drive)
|
|
{
|
|
struct pci_dev *dev = drive->hwif->pci_dev;
|
|
unsigned long flags;
|
|
u16 tmp16;
|
|
|
|
spin_lock_irqsave(&atiixp_lock, flags);
|
|
|
|
pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
|
|
if (save_mdma_mode[drive->dn])
|
|
tmp16 &= ~(1 << drive->dn);
|
|
else
|
|
tmp16 |= (1 << drive->dn);
|
|
pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, tmp16);
|
|
|
|
spin_unlock_irqrestore(&atiixp_lock, flags);
|
|
|
|
ide_dma_host_on(drive);
|
|
}
|
|
|
|
static void atiixp_dma_host_off(ide_drive_t *drive)
|
|
{
|
|
struct pci_dev *dev = drive->hwif->pci_dev;
|
|
unsigned long flags;
|
|
u16 tmp16;
|
|
|
|
spin_lock_irqsave(&atiixp_lock, flags);
|
|
|
|
pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
|
|
tmp16 &= ~(1 << drive->dn);
|
|
pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, tmp16);
|
|
|
|
spin_unlock_irqrestore(&atiixp_lock, flags);
|
|
|
|
ide_dma_host_off(drive);
|
|
}
|
|
|
|
/**
|
|
* atiixp_tune_drive - tune a drive attached to a ATIIXP
|
|
* @drive: drive to tune
|
|
* @pio: desired PIO mode
|
|
*
|
|
* Set the interface PIO mode.
|
|
*/
|
|
|
|
static void atiixp_tuneproc(ide_drive_t *drive, u8 pio)
|
|
{
|
|
struct pci_dev *dev = drive->hwif->pci_dev;
|
|
unsigned long flags;
|
|
int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
|
|
u32 pio_timing_data;
|
|
u16 pio_mode_data;
|
|
|
|
spin_lock_irqsave(&atiixp_lock, flags);
|
|
|
|
pci_read_config_word(dev, ATIIXP_IDE_PIO_MODE, &pio_mode_data);
|
|
pio_mode_data &= ~(0x07 << (drive->dn * 4));
|
|
pio_mode_data |= (pio << (drive->dn * 4));
|
|
pci_write_config_word(dev, ATIIXP_IDE_PIO_MODE, pio_mode_data);
|
|
|
|
pci_read_config_dword(dev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
|
|
pio_timing_data &= ~(0xff << timing_shift);
|
|
pio_timing_data |= (pio_timing[pio].recover_width << timing_shift) |
|
|
(pio_timing[pio].command_width << (timing_shift + 4));
|
|
pci_write_config_dword(dev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
|
|
|
|
spin_unlock_irqrestore(&atiixp_lock, flags);
|
|
}
|
|
|
|
/**
|
|
* atiixp_tune_chipset - tune a ATIIXP interface
|
|
* @drive: IDE drive to tune
|
|
* @xferspeed: speed to configure
|
|
*
|
|
* Set a ATIIXP interface channel to the desired speeds. This involves
|
|
* requires the right timing data into the ATIIXP configuration space
|
|
* then setting the drive parameters appropriately
|
|
*/
|
|
|
|
static int atiixp_speedproc(ide_drive_t *drive, u8 xferspeed)
|
|
{
|
|
struct pci_dev *dev = drive->hwif->pci_dev;
|
|
unsigned long flags;
|
|
int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
|
|
u32 tmp32;
|
|
u16 tmp16;
|
|
u8 speed, pio;
|
|
|
|
speed = ide_rate_filter(drive, xferspeed);
|
|
|
|
spin_lock_irqsave(&atiixp_lock, flags);
|
|
|
|
save_mdma_mode[drive->dn] = 0;
|
|
if (speed >= XFER_UDMA_0) {
|
|
pci_read_config_word(dev, ATIIXP_IDE_UDMA_MODE, &tmp16);
|
|
tmp16 &= ~(0x07 << (drive->dn * 4));
|
|
tmp16 |= ((speed & 0x07) << (drive->dn * 4));
|
|
pci_write_config_word(dev, ATIIXP_IDE_UDMA_MODE, tmp16);
|
|
} else {
|
|
if ((speed >= XFER_MW_DMA_0) && (speed <= XFER_MW_DMA_2)) {
|
|
save_mdma_mode[drive->dn] = speed;
|
|
pci_read_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, &tmp32);
|
|
tmp32 &= ~(0xff << timing_shift);
|
|
tmp32 |= (mdma_timing[speed & 0x03].recover_width << timing_shift) |
|
|
(mdma_timing[speed & 0x03].command_width << (timing_shift + 4));
|
|
pci_write_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, tmp32);
|
|
}
|
|
}
|
|
|
|
spin_unlock_irqrestore(&atiixp_lock, flags);
|
|
|
|
if (speed >= XFER_SW_DMA_0)
|
|
pio = atiixp_dma_2_pio(speed);
|
|
else
|
|
pio = speed - XFER_PIO_0;
|
|
|
|
atiixp_tuneproc(drive, pio);
|
|
|
|
return ide_config_drive_speed(drive, speed);
|
|
}
|
|
|
|
/**
|
|
* atiixp_config_drive_for_dma - configure drive for DMA
|
|
* @drive: IDE drive to configure
|
|
*
|
|
* Set up a ATIIXP interface channel for the best available speed.
|
|
* We prefer UDMA if it is available and then MWDMA. If DMA is
|
|
* not available we switch to PIO and return 0.
|
|
*/
|
|
|
|
static int atiixp_config_drive_for_dma(ide_drive_t *drive)
|
|
{
|
|
u8 speed = ide_max_dma_mode(drive);
|
|
|
|
if (!speed)
|
|
return 0;
|
|
|
|
(void) atiixp_speedproc(drive, speed);
|
|
return ide_dma_enable(drive);
|
|
}
|
|
|
|
/**
|
|
* atiixp_dma_check - set up an IDE device
|
|
* @drive: IDE drive to configure
|
|
*
|
|
* Set up the ATIIXP interface for the best available speed on this
|
|
* interface, preferring DMA to PIO.
|
|
*/
|
|
|
|
static int atiixp_dma_check(ide_drive_t *drive)
|
|
{
|
|
u8 tspeed, speed;
|
|
|
|
drive->init_speed = 0;
|
|
|
|
if (ide_use_dma(drive) && atiixp_config_drive_for_dma(drive))
|
|
return 0;
|
|
|
|
if (ide_use_fast_pio(drive)) {
|
|
tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL);
|
|
speed = atiixp_dma_2_pio(XFER_PIO_0 + tspeed) + XFER_PIO_0;
|
|
atiixp_speedproc(drive, speed);
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
/**
|
|
* init_hwif_atiixp - fill in the hwif for the ATIIXP
|
|
* @hwif: IDE interface
|
|
*
|
|
* Set up the ide_hwif_t for the ATIIXP interface according to the
|
|
* capabilities of the hardware.
|
|
*/
|
|
|
|
static void __devinit init_hwif_atiixp(ide_hwif_t *hwif)
|
|
{
|
|
u8 udma_mode = 0;
|
|
u8 ch = hwif->channel;
|
|
struct pci_dev *pdev = hwif->pci_dev;
|
|
|
|
if (!hwif->irq)
|
|
hwif->irq = ch ? 15 : 14;
|
|
|
|
hwif->autodma = 0;
|
|
hwif->tuneproc = &atiixp_tuneproc;
|
|
hwif->speedproc = &atiixp_speedproc;
|
|
hwif->drives[0].autotune = 1;
|
|
hwif->drives[1].autotune = 1;
|
|
|
|
if (!hwif->dma_base)
|
|
return;
|
|
|
|
hwif->atapi_dma = 1;
|
|
hwif->ultra_mask = 0x3f;
|
|
hwif->mwdma_mask = 0x06;
|
|
hwif->swdma_mask = 0x04;
|
|
|
|
pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode);
|
|
if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40)
|
|
hwif->udma_four = 1;
|
|
else
|
|
hwif->udma_four = 0;
|
|
|
|
hwif->dma_host_on = &atiixp_dma_host_on;
|
|
hwif->dma_host_off = &atiixp_dma_host_off;
|
|
hwif->ide_dma_check = &atiixp_dma_check;
|
|
if (!noautodma)
|
|
hwif->autodma = 1;
|
|
|
|
hwif->drives[1].autodma = hwif->autodma;
|
|
hwif->drives[0].autodma = hwif->autodma;
|
|
}
|
|
|
|
|
|
static ide_pci_device_t atiixp_pci_info[] __devinitdata = {
|
|
{ /* 0 */
|
|
.name = "ATIIXP",
|
|
.init_hwif = init_hwif_atiixp,
|
|
.channels = 2,
|
|
.autodma = AUTODMA,
|
|
.enablebits = {{0x48,0x01,0x00}, {0x48,0x08,0x00}},
|
|
.bootable = ON_BOARD,
|
|
},{ /* 1 */
|
|
.name = "SB600_PATA",
|
|
.init_hwif = init_hwif_atiixp,
|
|
.channels = 1,
|
|
.autodma = AUTODMA,
|
|
.enablebits = {{0x48,0x01,0x00}, {0x00,0x00,0x00}},
|
|
.bootable = ON_BOARD,
|
|
},
|
|
};
|
|
|
|
/**
|
|
* atiixp_init_one - called when a ATIIXP is found
|
|
* @dev: the atiixp device
|
|
* @id: the matching pci id
|
|
*
|
|
* Called when the PCI registration layer (or the IDE initialization)
|
|
* finds a device matching our IDE device tables.
|
|
*/
|
|
|
|
static int __devinit atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
return ide_setup_pci_device(dev, &atiixp_pci_info[id->driver_data]);
|
|
}
|
|
|
|
static struct pci_device_id atiixp_pci_tbl[] = {
|
|
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
|
|
{ 0, },
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);
|
|
|
|
static struct pci_driver driver = {
|
|
.name = "ATIIXP_IDE",
|
|
.id_table = atiixp_pci_tbl,
|
|
.probe = atiixp_init_one,
|
|
};
|
|
|
|
static int __init atiixp_ide_init(void)
|
|
{
|
|
return ide_pci_register_driver(&driver);
|
|
}
|
|
|
|
module_init(atiixp_ide_init);
|
|
|
|
MODULE_AUTHOR("HUI YU");
|
|
MODULE_DESCRIPTION("PCI driver module for ATI IXP IDE");
|
|
MODULE_LICENSE("GPL");
|