UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/media/pci/cx18/cx18-dvb.c

610 lines
17 KiB
C
Raw Blame History

/*
* cx18 functions for DVB support
*
* Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
* Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
*
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "cx18-version.h"
#include "cx18-dvb.h"
#include "cx18-io.h"
#include "cx18-queue.h"
#include "cx18-streams.h"
#include "cx18-cards.h"
#include "cx18-gpio.h"
#include "s5h1409.h"
#include "mxl5005s.h"
#include "s5h1411.h"
#include "tda18271.h"
#include "zl10353.h"
#include <linux/firmware.h>
#include "mt352.h"
#include "mt352_priv.h"
#include "tuner-xc2028.h"
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
#define FWFILE "dvb-cx18-mpc718-mt352.fw"
#define CX18_REG_DMUX_NUM_PORT_0_CONTROL 0xd5a000
#define CX18_CLOCK_ENABLE2 0xc71024
#define CX18_DMUX_CLK_MASK 0x0080
/*
* CX18_CARD_HVR_1600_ESMT
* CX18_CARD_HVR_1600_SAMSUNG
*/
static struct mxl5005s_config hauppauge_hvr1600_tuner = {
.i2c_address = 0xC6 >> 1,
.if_freq = IF_FREQ_5380000HZ,
.xtal_freq = CRYSTAL_FREQ_16000000HZ,
.agc_mode = MXL_SINGLE_AGC,
.tracking_filter = MXL_TF_C_H,
.rssi_enable = MXL_RSSI_ENABLE,
.cap_select = MXL_CAP_SEL_ENABLE,
.div_out = MXL_DIV_OUT_4,
.clock_out = MXL_CLOCK_OUT_DISABLE,
.output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
.top = MXL5005S_TOP_25P2,
.mod_mode = MXL_DIGITAL_MODE,
.if_mode = MXL_ZERO_IF,
.qam_gain = 0x02,
.AgcMasterByte = 0x00,
};
static struct s5h1409_config hauppauge_hvr1600_config = {
.demod_address = 0x32 >> 1,
.output_mode = S5H1409_SERIAL_OUTPUT,
.gpio = S5H1409_GPIO_ON,
.qam_if = 44000,
.inversion = S5H1409_INVERSION_OFF,
.status_mode = S5H1409_DEMODLOCKING,
.mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
.hvr1600_opt = S5H1409_HVR1600_OPTIMIZE
};
/*
* CX18_CARD_HVR_1600_S5H1411
*/
static struct s5h1411_config hcw_s5h1411_config = {
.output_mode = S5H1411_SERIAL_OUTPUT,
.gpio = S5H1411_GPIO_OFF,
.vsb_if = S5H1411_IF_44000,
.qam_if = S5H1411_IF_4000,
.inversion = S5H1411_INVERSION_ON,
.status_mode = S5H1411_DEMODLOCKING,
.mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
};
static struct tda18271_std_map hauppauge_tda18271_std_map = {
.atsc_6 = { .if_freq = 5380, .agc_mode = 3, .std = 3,
.if_lvl = 6, .rfagc_top = 0x37 },
.qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0,
.if_lvl = 6, .rfagc_top = 0x37 },
};
static struct tda18271_config hauppauge_tda18271_config = {
.std_map = &hauppauge_tda18271_std_map,
.gate = TDA18271_GATE_DIGITAL,
.output_opt = TDA18271_OUTPUT_LT_OFF,
};
/*
* CX18_CARD_LEADTEK_DVR3100H
*/
/* Information/confirmation of proper config values provided by Terry Wu */
static struct zl10353_config leadtek_dvr3100h_demod = {
.demod_address = 0x1e >> 1, /* Datasheet suggested straps */
.if2 = 45600, /* 4.560 MHz IF from the XC3028 */
.parallel_ts = 1, /* Not a serial TS */
.no_tuner = 1, /* XC3028 is not behind the gate */
.disable_i2c_gate_ctrl = 1, /* Disable the I2C gate */
};
/*
* CX18_CARD_YUAN_MPC718
*/
/*
* Due to
*
* 1. an absence of information on how to prgram the MT352
* 2. the Linux mt352 module pushing MT352 initialzation off onto us here
*
* We have to use an init sequence that *you* must extract from the Windows
* driver (yuanrap.sys) and which we load as a firmware.
*
* If someone can provide me with a Zarlink MT352 (Intel CE6352?) Design Manual
* with chip programming details, then I can remove this annoyance.
*/
static int yuan_mpc718_mt352_reqfw(struct cx18_stream *stream,
const struct firmware **fw)
{
struct cx18 *cx = stream->cx;
const char *fn = FWFILE;
int ret;
ret = request_firmware(fw, fn, &cx->pci_dev->dev);
if (ret)
CX18_ERR("Unable to open firmware file %s\n", fn);
else {
size_t sz = (*fw)->size;
if (sz < 2 || sz > 64 || (sz % 2) != 0) {
CX18_ERR("Firmware %s has a bad size: %lu bytes\n",
fn, (unsigned long) sz);
ret = -EILSEQ;
release_firmware(*fw);
*fw = NULL;
}
}
if (ret) {
CX18_ERR("The MPC718 board variant with the MT352 DVB-T"
"demodualtor will not work without it\n");
CX18_ERR("Run 'linux/Documentation/dvb/get_dvb_firmware "
"mpc718' if you need the firmware\n");
}
return ret;
}
static int yuan_mpc718_mt352_init(struct dvb_frontend *fe)
{
struct cx18_dvb *dvb = container_of(fe->dvb,
struct cx18_dvb, dvb_adapter);
struct cx18_stream *stream = dvb->stream;
const struct firmware *fw = NULL;
int ret;
int i;
u8 buf[3];
ret = yuan_mpc718_mt352_reqfw(stream, &fw);
if (ret)
return ret;
/* Loop through all the register-value pairs in the firmware file */
for (i = 0; i < fw->size; i += 2) {
buf[0] = fw->data[i];
/* Intercept a few registers we want to set ourselves */
switch (buf[0]) {
case TRL_NOMINAL_RATE_0:
/* Set our custom OFDM bandwidth in the case below */
break;
case TRL_NOMINAL_RATE_1:
/* 6 MHz: 64/7 * 6/8 / 20.48 * 2^16 = 0x55b6.db6 */
/* 7 MHz: 64/7 * 7/8 / 20.48 * 2^16 = 0x6400 */
/* 8 MHz: 64/7 * 8/8 / 20.48 * 2^16 = 0x7249.249 */
buf[1] = 0x72;
buf[2] = 0x49;
mt352_write(fe, buf, 3);
break;
case INPUT_FREQ_0:
/* Set our custom IF in the case below */
break;
case INPUT_FREQ_1:
/* 4.56 MHz IF: (20.48 - 4.56)/20.48 * 2^14 = 0x31c0 */
buf[1] = 0x31;
buf[2] = 0xc0;
mt352_write(fe, buf, 3);
break;
default:
/* Pass through the register-value pair from the fw */
buf[1] = fw->data[i+1];
mt352_write(fe, buf, 2);
break;
}
}
buf[0] = (u8) TUNER_GO;
buf[1] = 0x01; /* Go */
mt352_write(fe, buf, 2);
release_firmware(fw);
return 0;
}
static struct mt352_config yuan_mpc718_mt352_demod = {
.demod_address = 0x1e >> 1,
.adc_clock = 20480, /* 20.480 MHz */
.if2 = 4560, /* 4.560 MHz */
.no_tuner = 1, /* XC3028 is not behind the gate */
.demod_init = yuan_mpc718_mt352_init,
};
static struct zl10353_config yuan_mpc718_zl10353_demod = {
.demod_address = 0x1e >> 1, /* Datasheet suggested straps */
.if2 = 45600, /* 4.560 MHz IF from the XC3028 */
.parallel_ts = 1, /* Not a serial TS */
.no_tuner = 1, /* XC3028 is not behind the gate */
.disable_i2c_gate_ctrl = 1, /* Disable the I2C gate */
};
static struct zl10353_config gotview_dvd3_zl10353_demod = {
.demod_address = 0x1e >> 1, /* Datasheet suggested straps */
.if2 = 45600, /* 4.560 MHz IF from the XC3028 */
.parallel_ts = 1, /* Not a serial TS */
.no_tuner = 1, /* XC3028 is not behind the gate */
.disable_i2c_gate_ctrl = 1, /* Disable the I2C gate */
};
static int dvb_register(struct cx18_stream *stream);
/* Kernel DVB framework calls this when the feed needs to start.
* The CX18 framework should enable the transport DMA handling
* and queue processing.
*/
static int cx18_dvb_start_feed(struct dvb_demux_feed *feed)
{
struct dvb_demux *demux = feed->demux;
struct cx18_stream *stream = (struct cx18_stream *) demux->priv;
struct cx18 *cx;
int ret;
u32 v;
if (!stream)
return -EINVAL;
cx = stream->cx;
CX18_DEBUG_INFO("Start feed: pid = 0x%x index = %d\n",
feed->pid, feed->index);
mutex_lock(&cx->serialize_lock);
ret = cx18_init_on_first_open(cx);
mutex_unlock(&cx->serialize_lock);
if (ret) {
CX18_ERR("Failed to initialize firmware starting DVB feed\n");
return ret;
}
ret = -EINVAL;
switch (cx->card->type) {
case CX18_CARD_HVR_1600_ESMT:
case CX18_CARD_HVR_1600_SAMSUNG:
case CX18_CARD_HVR_1600_S5H1411:
v = cx18_read_reg(cx, CX18_REG_DMUX_NUM_PORT_0_CONTROL);
v |= 0x00400000; /* Serial Mode */
v |= 0x00002000; /* Data Length - Byte */
v |= 0x00010000; /* Error - Polarity */
v |= 0x00020000; /* Error - Passthru */
v |= 0x000c0000; /* Error - Ignore */
cx18_write_reg(cx, v, CX18_REG_DMUX_NUM_PORT_0_CONTROL);
break;
case CX18_CARD_LEADTEK_DVR3100H:
case CX18_CARD_YUAN_MPC718:
case CX18_CARD_GOTVIEW_PCI_DVD3:
default:
/* Assumption - Parallel transport - Signalling
* undefined or default.
*/
break;
}
if (!demux->dmx.frontend)
return -EINVAL;
mutex_lock(&stream->dvb->feedlock);
if (stream->dvb->feeding++ == 0) {
CX18_DEBUG_INFO("Starting Transport DMA\n");
mutex_lock(&cx->serialize_lock);
set_bit(CX18_F_S_STREAMING, &stream->s_flags);
ret = cx18_start_v4l2_encode_stream(stream);
if (ret < 0) {
CX18_DEBUG_INFO("Failed to start Transport DMA\n");
stream->dvb->feeding--;
if (stream->dvb->feeding == 0)
clear_bit(CX18_F_S_STREAMING, &stream->s_flags);
}
mutex_unlock(&cx->serialize_lock);
} else
ret = 0;
mutex_unlock(&stream->dvb->feedlock);
return ret;
}
/* Kernel DVB framework calls this when the feed needs to stop. */
static int cx18_dvb_stop_feed(struct dvb_demux_feed *feed)
{
struct dvb_demux *demux = feed->demux;
struct cx18_stream *stream = (struct cx18_stream *)demux->priv;
struct cx18 *cx;
int ret = -EINVAL;
if (stream) {
cx = stream->cx;
CX18_DEBUG_INFO("Stop feed: pid = 0x%x index = %d\n",
feed->pid, feed->index);
mutex_lock(&stream->dvb->feedlock);
if (--stream->dvb->feeding == 0) {
CX18_DEBUG_INFO("Stopping Transport DMA\n");
mutex_lock(&cx->serialize_lock);
ret = cx18_stop_v4l2_encode_stream(stream, 0);
mutex_unlock(&cx->serialize_lock);
} else
ret = 0;
mutex_unlock(&stream->dvb->feedlock);
}
return ret;
}
int cx18_dvb_register(struct cx18_stream *stream)
{
struct cx18 *cx = stream->cx;
struct cx18_dvb *dvb = stream->dvb;
struct dvb_adapter *dvb_adapter;
struct dvb_demux *dvbdemux;
struct dmx_demux *dmx;
int ret;
if (!dvb)
return -EINVAL;
dvb->enabled = 0;
dvb->stream = stream;
ret = dvb_register_adapter(&dvb->dvb_adapter,
CX18_DRIVER_NAME,
THIS_MODULE, &cx->pci_dev->dev, adapter_nr);
if (ret < 0)
goto err_out;
dvb_adapter = &dvb->dvb_adapter;
dvbdemux = &dvb->demux;
dvbdemux->priv = (void *)stream;
dvbdemux->filternum = 256;
dvbdemux->feednum = 256;
dvbdemux->start_feed = cx18_dvb_start_feed;
dvbdemux->stop_feed = cx18_dvb_stop_feed;
dvbdemux->dmx.capabilities = (DMX_TS_FILTERING |
DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING);
ret = dvb_dmx_init(dvbdemux);
if (ret < 0)
goto err_dvb_unregister_adapter;
dmx = &dvbdemux->dmx;
dvb->hw_frontend.source = DMX_FRONTEND_0;
dvb->mem_frontend.source = DMX_MEMORY_FE;
dvb->dmxdev.filternum = 256;
dvb->dmxdev.demux = dmx;
ret = dvb_dmxdev_init(&dvb->dmxdev, dvb_adapter);
if (ret < 0)
goto err_dvb_dmx_release;
ret = dmx->add_frontend(dmx, &dvb->hw_frontend);
if (ret < 0)
goto err_dvb_dmxdev_release;
ret = dmx->add_frontend(dmx, &dvb->mem_frontend);
if (ret < 0)
goto err_remove_hw_frontend;
ret = dmx->connect_frontend(dmx, &dvb->hw_frontend);
if (ret < 0)
goto err_remove_mem_frontend;
ret = dvb_register(stream);
if (ret < 0)
goto err_disconnect_frontend;
dvb_net_init(dvb_adapter, &dvb->dvbnet, dmx);
CX18_INFO("DVB Frontend registered\n");
CX18_INFO("Registered DVB adapter%d for %s (%d x %d.%02d kB)\n",
stream->dvb->dvb_adapter.num, stream->name,
stream->buffers, stream->buf_size/1024,
(stream->buf_size * 100 / 1024) % 100);
mutex_init(&dvb->feedlock);
dvb->enabled = 1;
return ret;
err_disconnect_frontend:
dmx->disconnect_frontend(dmx);
err_remove_mem_frontend:
dmx->remove_frontend(dmx, &dvb->mem_frontend);
err_remove_hw_frontend:
dmx->remove_frontend(dmx, &dvb->hw_frontend);
err_dvb_dmxdev_release:
dvb_dmxdev_release(&dvb->dmxdev);
err_dvb_dmx_release:
dvb_dmx_release(dvbdemux);
err_dvb_unregister_adapter:
dvb_unregister_adapter(dvb_adapter);
err_out:
return ret;
}
void cx18_dvb_unregister(struct cx18_stream *stream)
{
struct cx18 *cx = stream->cx;
struct cx18_dvb *dvb = stream->dvb;
struct dvb_adapter *dvb_adapter;
struct dvb_demux *dvbdemux;
struct dmx_demux *dmx;
CX18_INFO("unregister DVB\n");
if (dvb == NULL || !dvb->enabled)
return;
dvb_adapter = &dvb->dvb_adapter;
dvbdemux = &dvb->demux;
dmx = &dvbdemux->dmx;
dmx->close(dmx);
dvb_net_release(&dvb->dvbnet);
dmx->remove_frontend(dmx, &dvb->mem_frontend);
dmx->remove_frontend(dmx, &dvb->hw_frontend);
dvb_dmxdev_release(&dvb->dmxdev);
dvb_dmx_release(dvbdemux);
dvb_unregister_frontend(dvb->fe);
dvb_frontend_detach(dvb->fe);
dvb_unregister_adapter(dvb_adapter);
}
/* All the DVB attach calls go here, this function get's modified
* for each new card. cx18_dvb_start_feed() will also need changes.
*/
static int dvb_register(struct cx18_stream *stream)
{
struct cx18_dvb *dvb = stream->dvb;
struct cx18 *cx = stream->cx;
int ret = 0;
switch (cx->card->type) {
case CX18_CARD_HVR_1600_ESMT:
case CX18_CARD_HVR_1600_SAMSUNG:
dvb->fe = dvb_attach(s5h1409_attach,
&hauppauge_hvr1600_config,
&cx->i2c_adap[0]);
if (dvb->fe != NULL) {
dvb_attach(mxl5005s_attach, dvb->fe,
&cx->i2c_adap[0],
&hauppauge_hvr1600_tuner);
ret = 0;
}
break;
case CX18_CARD_HVR_1600_S5H1411:
dvb->fe = dvb_attach(s5h1411_attach,
&hcw_s5h1411_config,
&cx->i2c_adap[0]);
if (dvb->fe != NULL)
dvb_attach(tda18271_attach, dvb->fe,
0x60, &cx->i2c_adap[0],
&hauppauge_tda18271_config);
break;
case CX18_CARD_LEADTEK_DVR3100H:
dvb->fe = dvb_attach(zl10353_attach,
&leadtek_dvr3100h_demod,
&cx->i2c_adap[1]);
if (dvb->fe != NULL) {
struct dvb_frontend *fe;
struct xc2028_config cfg = {
.i2c_adap = &cx->i2c_adap[1],
.i2c_addr = 0xc2 >> 1,
.ctrl = NULL,
};
static struct xc2028_ctrl ctrl = {
.fname = XC2028_DEFAULT_FIRMWARE,
.max_len = 64,
.demod = XC3028_FE_ZARLINK456,
.type = XC2028_AUTO,
};
fe = dvb_attach(xc2028_attach, dvb->fe, &cfg);
if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
fe->ops.tuner_ops.set_config(fe, &ctrl);
}
break;
case CX18_CARD_YUAN_MPC718:
/*
* TODO
* Apparently, these cards also could instead have a
* DiBcom demod supported by one of the db7000 drivers
*/
dvb->fe = dvb_attach(mt352_attach,
&yuan_mpc718_mt352_demod,
&cx->i2c_adap[1]);
if (dvb->fe == NULL)
dvb->fe = dvb_attach(zl10353_attach,
&yuan_mpc718_zl10353_demod,
&cx->i2c_adap[1]);
if (dvb->fe != NULL) {
struct dvb_frontend *fe;
struct xc2028_config cfg = {
.i2c_adap = &cx->i2c_adap[1],
.i2c_addr = 0xc2 >> 1,
.ctrl = NULL,
};
static struct xc2028_ctrl ctrl = {
.fname = XC2028_DEFAULT_FIRMWARE,
.max_len = 64,
.demod = XC3028_FE_ZARLINK456,
.type = XC2028_AUTO,
};
fe = dvb_attach(xc2028_attach, dvb->fe, &cfg);
if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
fe->ops.tuner_ops.set_config(fe, &ctrl);
}
break;
case CX18_CARD_GOTVIEW_PCI_DVD3:
dvb->fe = dvb_attach(zl10353_attach,
&gotview_dvd3_zl10353_demod,
&cx->i2c_adap[1]);
if (dvb->fe != NULL) {
struct dvb_frontend *fe;
struct xc2028_config cfg = {
.i2c_adap = &cx->i2c_adap[1],
.i2c_addr = 0xc2 >> 1,
.ctrl = NULL,
};
static struct xc2028_ctrl ctrl = {
.fname = XC2028_DEFAULT_FIRMWARE,
.max_len = 64,
.demod = XC3028_FE_ZARLINK456,
.type = XC2028_AUTO,
};
fe = dvb_attach(xc2028_attach, dvb->fe, &cfg);
if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
fe->ops.tuner_ops.set_config(fe, &ctrl);
}
break;
default:
/* No Digital Tv Support */
break;
}
if (dvb->fe == NULL) {
CX18_ERR("frontend initialization failed\n");
return -1;
}
dvb->fe->callback = cx18_reset_tuner_gpio;
ret = dvb_register_frontend(&dvb->dvb_adapter, dvb->fe);
if (ret < 0) {
if (dvb->fe->ops.release)
dvb->fe->ops.release(dvb->fe);
return ret;
}
/*
* The firmware seems to enable the TS DMUX clock
* under various circumstances. However, since we know we
* might use it, let's just turn it on ourselves here.
*/
cx18_write_reg_expect(cx,
(CX18_DMUX_CLK_MASK << 16) | CX18_DMUX_CLK_MASK,
CX18_CLOCK_ENABLE2,
CX18_DMUX_CLK_MASK,
(CX18_DMUX_CLK_MASK << 16) | CX18_DMUX_CLK_MASK);
return ret;
}
MODULE_FIRMWARE(FWFILE);
Reference in New Issue View Git Blame Copy Permalink