757 lines
16 KiB
C
757 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2018, The Linux Foundation. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#include <drm/drm_probe_helper.h>
|
|
#include <drm/drm_atomic_helper.h>
|
|
#include <drm/drm_mipi_dsi.h>
|
|
#include <drm/drm_of.h>
|
|
|
|
#include <video/videomode.h>
|
|
|
|
#define I2C_MAIN 0
|
|
#define I2C_ADDR_MAIN 0x48
|
|
|
|
#define I2C_CEC_DSI 1
|
|
#define I2C_ADDR_CEC_DSI 0x49
|
|
|
|
#define I2C_MAX_IDX 2
|
|
|
|
struct lt8912 {
|
|
struct device *dev;
|
|
struct drm_bridge bridge;
|
|
struct drm_connector connector;
|
|
|
|
struct i2c_client *i2c_client[I2C_MAX_IDX];
|
|
struct regmap *regmap[I2C_MAX_IDX];
|
|
|
|
struct device_node *host_node;
|
|
struct drm_bridge *hdmi_port;
|
|
|
|
struct mipi_dsi_device *dsi;
|
|
|
|
struct gpio_desc *gp_reset;
|
|
|
|
struct videomode mode;
|
|
|
|
u8 data_lanes;
|
|
bool is_power_on;
|
|
bool is_attached;
|
|
};
|
|
|
|
static int lt8912_write_init_config(struct lt8912 *lt)
|
|
{
|
|
const struct reg_sequence seq[] = {
|
|
/* Digital clock en*/
|
|
{0x08, 0xff},
|
|
{0x09, 0xff},
|
|
{0x0a, 0xff},
|
|
{0x0b, 0x7c},
|
|
{0x0c, 0xff},
|
|
{0x42, 0x04},
|
|
|
|
/*Tx Analog*/
|
|
{0x31, 0xb1},
|
|
{0x32, 0xb1},
|
|
{0x33, 0x0e},
|
|
{0x37, 0x00},
|
|
{0x38, 0x22},
|
|
{0x60, 0x82},
|
|
|
|
/*Cbus Analog*/
|
|
{0x39, 0x45},
|
|
{0x3a, 0x00},
|
|
{0x3b, 0x00},
|
|
|
|
/*HDMI Pll Analog*/
|
|
{0x44, 0x31},
|
|
{0x55, 0x44},
|
|
{0x57, 0x01},
|
|
{0x5a, 0x02},
|
|
|
|
/*MIPI Analog*/
|
|
{0x3e, 0xd6},
|
|
{0x3f, 0xd4},
|
|
{0x41, 0x3c},
|
|
{0xB2, 0x00},
|
|
};
|
|
|
|
return regmap_multi_reg_write(lt->regmap[I2C_MAIN], seq, ARRAY_SIZE(seq));
|
|
}
|
|
|
|
static int lt8912_write_mipi_basic_config(struct lt8912 *lt)
|
|
{
|
|
const struct reg_sequence seq[] = {
|
|
{0x12, 0x04},
|
|
{0x14, 0x00},
|
|
{0x15, 0x00},
|
|
{0x1a, 0x03},
|
|
{0x1b, 0x03},
|
|
};
|
|
|
|
return regmap_multi_reg_write(lt->regmap[I2C_CEC_DSI], seq, ARRAY_SIZE(seq));
|
|
};
|
|
|
|
static int lt8912_write_dds_config(struct lt8912 *lt)
|
|
{
|
|
const struct reg_sequence seq[] = {
|
|
{0x4e, 0xff},
|
|
{0x4f, 0x56},
|
|
{0x50, 0x69},
|
|
{0x51, 0x80},
|
|
{0x1f, 0x5e},
|
|
{0x20, 0x01},
|
|
{0x21, 0x2c},
|
|
{0x22, 0x01},
|
|
{0x23, 0xfa},
|
|
{0x24, 0x00},
|
|
{0x25, 0xc8},
|
|
{0x26, 0x00},
|
|
{0x27, 0x5e},
|
|
{0x28, 0x01},
|
|
{0x29, 0x2c},
|
|
{0x2a, 0x01},
|
|
{0x2b, 0xfa},
|
|
{0x2c, 0x00},
|
|
{0x2d, 0xc8},
|
|
{0x2e, 0x00},
|
|
{0x42, 0x64},
|
|
{0x43, 0x00},
|
|
{0x44, 0x04},
|
|
{0x45, 0x00},
|
|
{0x46, 0x59},
|
|
{0x47, 0x00},
|
|
{0x48, 0xf2},
|
|
{0x49, 0x06},
|
|
{0x4a, 0x00},
|
|
{0x4b, 0x72},
|
|
{0x4c, 0x45},
|
|
{0x4d, 0x00},
|
|
{0x52, 0x08},
|
|
{0x53, 0x00},
|
|
{0x54, 0xb2},
|
|
{0x55, 0x00},
|
|
{0x56, 0xe4},
|
|
{0x57, 0x0d},
|
|
{0x58, 0x00},
|
|
{0x59, 0xe4},
|
|
{0x5a, 0x8a},
|
|
{0x5b, 0x00},
|
|
{0x5c, 0x34},
|
|
{0x1e, 0x4f},
|
|
{0x51, 0x00},
|
|
};
|
|
|
|
return regmap_multi_reg_write(lt->regmap[I2C_CEC_DSI], seq, ARRAY_SIZE(seq));
|
|
}
|
|
|
|
static int lt8912_write_rxlogicres_config(struct lt8912 *lt)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_write(lt->regmap[I2C_MAIN], 0x03, 0x7f);
|
|
usleep_range(10000, 20000);
|
|
ret |= regmap_write(lt->regmap[I2C_MAIN], 0x03, 0xff);
|
|
|
|
return ret;
|
|
};
|
|
|
|
static int lt8912_write_lvds_config(struct lt8912 *lt)
|
|
{
|
|
const struct reg_sequence seq[] = {
|
|
{0x44, 0x30},
|
|
{0x51, 0x05},
|
|
{0x50, 0x24},
|
|
{0x51, 0x2d},
|
|
{0x52, 0x04},
|
|
{0x69, 0x0e},
|
|
{0x69, 0x8e},
|
|
{0x6a, 0x00},
|
|
{0x6c, 0xb8},
|
|
{0x6b, 0x51},
|
|
{0x04, 0xfb},
|
|
{0x04, 0xff},
|
|
{0x7f, 0x00},
|
|
{0xa8, 0x13},
|
|
{0x02, 0xf7},
|
|
{0x02, 0xff},
|
|
{0x03, 0xcf},
|
|
{0x03, 0xff},
|
|
};
|
|
|
|
return regmap_multi_reg_write(lt->regmap[I2C_CEC_DSI], seq, ARRAY_SIZE(seq));
|
|
};
|
|
|
|
static inline struct lt8912 *bridge_to_lt8912(struct drm_bridge *b)
|
|
{
|
|
return container_of(b, struct lt8912, bridge);
|
|
}
|
|
|
|
static inline struct lt8912 *connector_to_lt8912(struct drm_connector *c)
|
|
{
|
|
return container_of(c, struct lt8912, connector);
|
|
}
|
|
|
|
static const struct regmap_config lt8912_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = 0xff,
|
|
};
|
|
|
|
static int lt8912_init_i2c(struct lt8912 *lt, struct i2c_client *client)
|
|
{
|
|
unsigned int i;
|
|
/*
|
|
* At this time we only initialize 2 chips, but the lt8912 provides
|
|
* a third interface for the audio over HDMI configuration.
|
|
*/
|
|
struct i2c_board_info info[] = {
|
|
{ I2C_BOARD_INFO("lt8912p0", I2C_ADDR_MAIN), },
|
|
{ I2C_BOARD_INFO("lt8912p1", I2C_ADDR_CEC_DSI), },
|
|
};
|
|
|
|
if (!lt)
|
|
return -ENODEV;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(info); i++) {
|
|
if (i > 0) {
|
|
lt->i2c_client[i] = i2c_new_dummy_device(client->adapter,
|
|
info[i].addr);
|
|
if (IS_ERR(lt->i2c_client[i]))
|
|
return PTR_ERR(lt->i2c_client[i]);
|
|
}
|
|
|
|
lt->regmap[i] = devm_regmap_init_i2c(lt->i2c_client[i],
|
|
<8912_regmap_config);
|
|
if (IS_ERR(lt->regmap[i]))
|
|
return PTR_ERR(lt->regmap[i]);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int lt8912_free_i2c(struct lt8912 *lt)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 1; i < I2C_MAX_IDX; i++)
|
|
i2c_unregister_device(lt->i2c_client[i]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lt8912_hard_power_on(struct lt8912 *lt)
|
|
{
|
|
gpiod_set_value_cansleep(lt->gp_reset, 0);
|
|
msleep(20);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void lt8912_hard_power_off(struct lt8912 *lt)
|
|
{
|
|
gpiod_set_value_cansleep(lt->gp_reset, 1);
|
|
msleep(20);
|
|
lt->is_power_on = false;
|
|
}
|
|
|
|
static int lt8912_video_setup(struct lt8912 *lt)
|
|
{
|
|
u32 hactive, h_total, hpw, hfp, hbp;
|
|
u32 vactive, v_total, vpw, vfp, vbp;
|
|
u8 settle = 0x08;
|
|
int ret;
|
|
|
|
if (!lt)
|
|
return -EINVAL;
|
|
|
|
hactive = lt->mode.hactive;
|
|
hfp = lt->mode.hfront_porch;
|
|
hpw = lt->mode.hsync_len;
|
|
hbp = lt->mode.hback_porch;
|
|
h_total = hactive + hfp + hpw + hbp;
|
|
|
|
vactive = lt->mode.vactive;
|
|
vfp = lt->mode.vfront_porch;
|
|
vpw = lt->mode.vsync_len;
|
|
vbp = lt->mode.vback_porch;
|
|
v_total = vactive + vfp + vpw + vbp;
|
|
|
|
if (vactive <= 600)
|
|
settle = 0x04;
|
|
else if (vactive == 1080)
|
|
settle = 0x0a;
|
|
|
|
ret = regmap_write(lt->regmap[I2C_CEC_DSI], 0x10, 0x01);
|
|
ret |= regmap_write(lt->regmap[I2C_CEC_DSI], 0x11, settle);
|
|
ret |= regmap_write(lt->regmap[I2C_CEC_DSI], 0x18, hpw);
|
|
ret |= regmap_write(lt->regmap[I2C_CEC_DSI], 0x19, vpw);
|
|
ret |= regmap_write(lt->regmap[I2C_CEC_DSI], 0x1c, hactive & 0xff);
|
|
ret |= regmap_write(lt->regmap[I2C_CEC_DSI], 0x1d, hactive >> 8);
|
|
|
|
ret |= regmap_write(lt->regmap[I2C_CEC_DSI], 0x2f, 0x0c);
|
|
|
|
ret |= regmap_write(lt->regmap[I2C_CEC_DSI], 0x34, h_total & 0xff);
|
|
ret |= regmap_write(lt->regmap[I2C_CEC_DSI], 0x35, h_total >> 8);
|
|
|
|
ret |= regmap_write(lt->regmap[I2C_CEC_DSI], 0x36, v_total & 0xff);
|
|
ret |= regmap_write(lt->regmap[I2C_CEC_DSI], 0x37, v_total >> 8);
|
|
|
|
ret |= regmap_write(lt->regmap[I2C_CEC_DSI], 0x38, vbp & 0xff);
|
|
ret |= regmap_write(lt->regmap[I2C_CEC_DSI], 0x39, vbp >> 8);
|
|
|
|
ret |= regmap_write(lt->regmap[I2C_CEC_DSI], 0x3a, vfp & 0xff);
|
|
ret |= regmap_write(lt->regmap[I2C_CEC_DSI], 0x3b, vfp >> 8);
|
|
|
|
ret |= regmap_write(lt->regmap[I2C_CEC_DSI], 0x3c, hbp & 0xff);
|
|
ret |= regmap_write(lt->regmap[I2C_CEC_DSI], 0x3d, hbp >> 8);
|
|
|
|
ret |= regmap_write(lt->regmap[I2C_CEC_DSI], 0x3e, hfp & 0xff);
|
|
ret |= regmap_write(lt->regmap[I2C_CEC_DSI], 0x3f, hfp >> 8);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int lt8912_soft_power_on(struct lt8912 *lt)
|
|
{
|
|
if (!lt->is_power_on) {
|
|
u32 lanes = lt->data_lanes;
|
|
|
|
lt8912_write_init_config(lt);
|
|
regmap_write(lt->regmap[I2C_CEC_DSI], 0x13, lanes & 3);
|
|
|
|
lt8912_write_mipi_basic_config(lt);
|
|
|
|
lt->is_power_on = true;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lt8912_video_on(struct lt8912 *lt)
|
|
{
|
|
int ret;
|
|
|
|
ret = lt8912_video_setup(lt);
|
|
if (ret < 0)
|
|
goto end;
|
|
|
|
ret = lt8912_write_dds_config(lt);
|
|
if (ret < 0)
|
|
goto end;
|
|
|
|
ret = lt8912_write_rxlogicres_config(lt);
|
|
if (ret < 0)
|
|
goto end;
|
|
|
|
ret = lt8912_write_lvds_config(lt);
|
|
if (ret < 0)
|
|
goto end;
|
|
|
|
end:
|
|
return ret;
|
|
}
|
|
|
|
static enum drm_connector_status lt8912_check_cable_status(struct lt8912 *lt)
|
|
{
|
|
int ret;
|
|
unsigned int reg_val;
|
|
|
|
ret = regmap_read(lt->regmap[I2C_MAIN], 0xC1, ®_val);
|
|
if (ret)
|
|
return connector_status_unknown;
|
|
|
|
if (reg_val & BIT(7))
|
|
return connector_status_connected;
|
|
|
|
return connector_status_disconnected;
|
|
}
|
|
|
|
static enum drm_connector_status
|
|
lt8912_connector_detect(struct drm_connector *connector, bool force)
|
|
{
|
|
struct lt8912 *lt = connector_to_lt8912(connector);
|
|
|
|
if (lt->hdmi_port->ops & DRM_BRIDGE_OP_DETECT)
|
|
return drm_bridge_detect(lt->hdmi_port);
|
|
|
|
return lt8912_check_cable_status(lt);
|
|
}
|
|
|
|
static const struct drm_connector_funcs lt8912_connector_funcs = {
|
|
.detect = lt8912_connector_detect,
|
|
.fill_modes = drm_helper_probe_single_connector_modes,
|
|
.destroy = drm_connector_cleanup,
|
|
.reset = drm_atomic_helper_connector_reset,
|
|
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
|
|
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
|
|
};
|
|
|
|
static enum drm_mode_status
|
|
lt8912_connector_mode_valid(struct drm_connector *connector,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
if (mode->clock > 150000)
|
|
return MODE_CLOCK_HIGH;
|
|
|
|
if (mode->hdisplay > 1920)
|
|
return MODE_BAD_HVALUE;
|
|
|
|
if (mode->vdisplay > 1080)
|
|
return MODE_BAD_VVALUE;
|
|
|
|
return MODE_OK;
|
|
}
|
|
|
|
static int lt8912_connector_get_modes(struct drm_connector *connector)
|
|
{
|
|
struct edid *edid;
|
|
int ret = -1;
|
|
int num = 0;
|
|
struct lt8912 *lt = connector_to_lt8912(connector);
|
|
u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
|
|
|
|
edid = drm_bridge_get_edid(lt->hdmi_port, connector);
|
|
if (edid) {
|
|
drm_connector_update_edid_property(connector, edid);
|
|
num = drm_add_edid_modes(connector, edid);
|
|
} else {
|
|
return ret;
|
|
}
|
|
|
|
ret = drm_display_info_set_bus_formats(&connector->display_info,
|
|
&bus_format, 1);
|
|
if (ret)
|
|
num = ret;
|
|
|
|
kfree(edid);
|
|
return num;
|
|
}
|
|
|
|
static const struct drm_connector_helper_funcs lt8912_connector_helper_funcs = {
|
|
.get_modes = lt8912_connector_get_modes,
|
|
.mode_valid = lt8912_connector_mode_valid,
|
|
};
|
|
|
|
static void lt8912_bridge_mode_set(struct drm_bridge *bridge,
|
|
const struct drm_display_mode *mode,
|
|
const struct drm_display_mode *adj)
|
|
{
|
|
struct lt8912 *lt = bridge_to_lt8912(bridge);
|
|
|
|
drm_display_mode_to_videomode(adj, <->mode);
|
|
}
|
|
|
|
static void lt8912_bridge_enable(struct drm_bridge *bridge)
|
|
{
|
|
struct lt8912 *lt = bridge_to_lt8912(bridge);
|
|
|
|
lt8912_video_on(lt);
|
|
}
|
|
|
|
static int lt8912_attach_dsi(struct lt8912 *lt)
|
|
{
|
|
struct device *dev = lt->dev;
|
|
struct mipi_dsi_host *host;
|
|
struct mipi_dsi_device *dsi;
|
|
int ret = -1;
|
|
const struct mipi_dsi_device_info info = { .type = "lt8912",
|
|
.channel = 0,
|
|
.node = NULL,
|
|
};
|
|
|
|
host = of_find_mipi_dsi_host_by_node(lt->host_node);
|
|
if (!host) {
|
|
dev_err(dev, "failed to find dsi host\n");
|
|
return -EPROBE_DEFER;
|
|
}
|
|
|
|
dsi = devm_mipi_dsi_device_register_full(dev, host, &info);
|
|
if (IS_ERR(dsi)) {
|
|
ret = PTR_ERR(dsi);
|
|
dev_err(dev, "failed to create dsi device (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
lt->dsi = dsi;
|
|
|
|
dsi->lanes = lt->data_lanes;
|
|
dsi->format = MIPI_DSI_FMT_RGB888;
|
|
|
|
dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
|
|
MIPI_DSI_MODE_VIDEO_BURST |
|
|
MIPI_DSI_MODE_LPM |
|
|
MIPI_DSI_MODE_NO_EOT_PACKET;
|
|
|
|
ret = devm_mipi_dsi_attach(dev, dsi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to attach dsi to host\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lt8912_bridge_connector_init(struct drm_bridge *bridge)
|
|
{
|
|
int ret;
|
|
struct lt8912 *lt = bridge_to_lt8912(bridge);
|
|
struct drm_connector *connector = <->connector;
|
|
|
|
connector->polled = DRM_CONNECTOR_POLL_CONNECT |
|
|
DRM_CONNECTOR_POLL_DISCONNECT;
|
|
|
|
ret = drm_connector_init(bridge->dev, connector,
|
|
<8912_connector_funcs,
|
|
lt->hdmi_port->type);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
drm_connector_helper_add(connector, <8912_connector_helper_funcs);
|
|
|
|
connector->dpms = DRM_MODE_DPMS_OFF;
|
|
drm_connector_attach_encoder(connector, bridge->encoder);
|
|
|
|
exit:
|
|
return ret;
|
|
}
|
|
|
|
static int lt8912_bridge_attach(struct drm_bridge *bridge,
|
|
enum drm_bridge_attach_flags flags)
|
|
{
|
|
struct lt8912 *lt = bridge_to_lt8912(bridge);
|
|
int ret;
|
|
|
|
if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)) {
|
|
ret = lt8912_bridge_connector_init(bridge);
|
|
if (ret) {
|
|
dev_err(lt->dev, "Failed to init bridge ! (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = lt8912_hard_power_on(lt);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = lt8912_soft_power_on(lt);
|
|
if (ret)
|
|
goto error;
|
|
|
|
lt->is_attached = true;
|
|
|
|
return 0;
|
|
|
|
error:
|
|
lt8912_hard_power_off(lt);
|
|
return ret;
|
|
}
|
|
|
|
static void lt8912_bridge_detach(struct drm_bridge *bridge)
|
|
{
|
|
struct lt8912 *lt = bridge_to_lt8912(bridge);
|
|
|
|
if (lt->is_attached) {
|
|
lt8912_hard_power_off(lt);
|
|
drm_connector_unregister(<->connector);
|
|
drm_connector_cleanup(<->connector);
|
|
}
|
|
}
|
|
|
|
static enum drm_connector_status
|
|
lt8912_bridge_detect(struct drm_bridge *bridge)
|
|
{
|
|
struct lt8912 *lt = bridge_to_lt8912(bridge);
|
|
|
|
if (lt->hdmi_port->ops & DRM_BRIDGE_OP_DETECT)
|
|
return drm_bridge_detect(lt->hdmi_port);
|
|
|
|
return lt8912_check_cable_status(lt);
|
|
}
|
|
|
|
static struct edid *lt8912_bridge_get_edid(struct drm_bridge *bridge,
|
|
struct drm_connector *connector)
|
|
{
|
|
struct lt8912 *lt = bridge_to_lt8912(bridge);
|
|
|
|
/*
|
|
* edid must be read through the ddc bus but it must be
|
|
* given to the hdmi connector node.
|
|
*/
|
|
if (lt->hdmi_port->ops & DRM_BRIDGE_OP_EDID)
|
|
return drm_bridge_get_edid(lt->hdmi_port, connector);
|
|
|
|
dev_warn(lt->dev, "The connected bridge does not supports DRM_BRIDGE_OP_EDID\n");
|
|
return NULL;
|
|
}
|
|
|
|
static const struct drm_bridge_funcs lt8912_bridge_funcs = {
|
|
.attach = lt8912_bridge_attach,
|
|
.detach = lt8912_bridge_detach,
|
|
.mode_set = lt8912_bridge_mode_set,
|
|
.enable = lt8912_bridge_enable,
|
|
.detect = lt8912_bridge_detect,
|
|
.get_edid = lt8912_bridge_get_edid,
|
|
};
|
|
|
|
static int lt8912_parse_dt(struct lt8912 *lt)
|
|
{
|
|
struct gpio_desc *gp_reset;
|
|
struct device *dev = lt->dev;
|
|
int ret;
|
|
int data_lanes;
|
|
struct device_node *port_node;
|
|
struct device_node *endpoint;
|
|
|
|
gp_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(gp_reset)) {
|
|
ret = PTR_ERR(gp_reset);
|
|
if (ret != -EPROBE_DEFER)
|
|
dev_err(dev, "Failed to get reset gpio: %d\n", ret);
|
|
return ret;
|
|
}
|
|
lt->gp_reset = gp_reset;
|
|
|
|
endpoint = of_graph_get_endpoint_by_regs(dev->of_node, 0, -1);
|
|
if (!endpoint)
|
|
return -ENODEV;
|
|
|
|
data_lanes = of_property_count_u32_elems(endpoint, "data-lanes");
|
|
of_node_put(endpoint);
|
|
if (data_lanes < 0) {
|
|
dev_err(lt->dev, "%s: Bad data-lanes property\n", __func__);
|
|
return data_lanes;
|
|
}
|
|
lt->data_lanes = data_lanes;
|
|
|
|
lt->host_node = of_graph_get_remote_node(dev->of_node, 0, -1);
|
|
if (!lt->host_node) {
|
|
dev_err(lt->dev, "%s: Failed to get remote port\n", __func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
port_node = of_graph_get_remote_node(dev->of_node, 1, -1);
|
|
if (!port_node) {
|
|
dev_err(lt->dev, "%s: Failed to get connector port\n", __func__);
|
|
ret = -ENODEV;
|
|
goto err_free_host_node;
|
|
}
|
|
|
|
lt->hdmi_port = of_drm_find_bridge(port_node);
|
|
if (!lt->hdmi_port) {
|
|
dev_err(lt->dev, "%s: Failed to get hdmi port\n", __func__);
|
|
ret = -ENODEV;
|
|
goto err_free_host_node;
|
|
}
|
|
|
|
if (!of_device_is_compatible(port_node, "hdmi-connector")) {
|
|
dev_err(lt->dev, "%s: Failed to get hdmi port\n", __func__);
|
|
ret = -EINVAL;
|
|
goto err_free_host_node;
|
|
}
|
|
|
|
of_node_put(port_node);
|
|
return 0;
|
|
|
|
err_free_host_node:
|
|
of_node_put(port_node);
|
|
of_node_put(lt->host_node);
|
|
return ret;
|
|
}
|
|
|
|
static int lt8912_put_dt(struct lt8912 *lt)
|
|
{
|
|
of_node_put(lt->host_node);
|
|
return 0;
|
|
}
|
|
|
|
static int lt8912_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
static struct lt8912 *lt;
|
|
int ret = 0;
|
|
struct device *dev = &client->dev;
|
|
|
|
lt = devm_kzalloc(dev, sizeof(struct lt8912), GFP_KERNEL);
|
|
if (!lt)
|
|
return -ENOMEM;
|
|
|
|
lt->dev = dev;
|
|
lt->i2c_client[0] = client;
|
|
|
|
ret = lt8912_parse_dt(lt);
|
|
if (ret)
|
|
goto err_dt_parse;
|
|
|
|
ret = lt8912_init_i2c(lt, client);
|
|
if (ret)
|
|
goto err_i2c;
|
|
|
|
i2c_set_clientdata(client, lt);
|
|
|
|
lt->bridge.funcs = <8912_bridge_funcs;
|
|
lt->bridge.of_node = dev->of_node;
|
|
lt->bridge.ops = (DRM_BRIDGE_OP_EDID |
|
|
DRM_BRIDGE_OP_DETECT);
|
|
|
|
drm_bridge_add(<->bridge);
|
|
|
|
ret = lt8912_attach_dsi(lt);
|
|
if (ret)
|
|
goto err_attach;
|
|
|
|
return 0;
|
|
|
|
err_attach:
|
|
drm_bridge_remove(<->bridge);
|
|
lt8912_free_i2c(lt);
|
|
err_i2c:
|
|
lt8912_put_dt(lt);
|
|
err_dt_parse:
|
|
return ret;
|
|
}
|
|
|
|
static int lt8912_remove(struct i2c_client *client)
|
|
{
|
|
struct lt8912 *lt = i2c_get_clientdata(client);
|
|
|
|
lt8912_bridge_detach(<->bridge);
|
|
drm_bridge_remove(<->bridge);
|
|
lt8912_free_i2c(lt);
|
|
lt8912_put_dt(lt);
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id lt8912_dt_match[] = {
|
|
{.compatible = "lontium,lt8912b"},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, lt8912_dt_match);
|
|
|
|
static const struct i2c_device_id lt8912_id[] = {
|
|
{"lt8912", 0},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, lt8912_id);
|
|
|
|
static struct i2c_driver lt8912_i2c_driver = {
|
|
.driver = {
|
|
.name = "lt8912",
|
|
.of_match_table = lt8912_dt_match,
|
|
},
|
|
.probe = lt8912_probe,
|
|
.remove = lt8912_remove,
|
|
.id_table = lt8912_id,
|
|
};
|
|
module_i2c_driver(lt8912_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Adrien Grassein <adrien.grassein@gmail.com>");
|
|
MODULE_DESCRIPTION("lt8912 drm driver");
|
|
MODULE_LICENSE("GPL v2");
|