UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/openrisc/kernel/head.S

1569 lines
39 KiB
ArmAsm
Raw Blame History

/*
* OpenRISC head.S
*
* Linux architectural port borrowing liberally from similar works of
* others. All original copyrights apply as per the original source
* declaration.
*
* Modifications for the OpenRISC architecture:
* Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
* Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/linkage.h>
#include <linux/threads.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/serial_reg.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/pgtable.h>
#include <asm/thread_info.h>
#include <asm/cache.h>
#include <asm/spr_defs.h>
#include <asm/asm-offsets.h>
#include <linux/of_fdt.h>
#define tophys(rd,rs) \
l.movhi rd,hi(-KERNELBASE) ;\
l.add rd,rd,rs
#define CLEAR_GPR(gpr) \
l.movhi gpr,0x0
#define LOAD_SYMBOL_2_GPR(gpr,symbol) \
l.movhi gpr,hi(symbol) ;\
l.ori gpr,gpr,lo(symbol)
#define UART_BASE_ADD 0x90000000
#define EXCEPTION_SR (SPR_SR_DME | SPR_SR_IME | SPR_SR_DCE | SPR_SR_ICE | SPR_SR_SM)
#define SYSCALL_SR (SPR_SR_DME | SPR_SR_IME | SPR_SR_DCE | SPR_SR_ICE | SPR_SR_IEE | SPR_SR_TEE | SPR_SR_SM)
/* ============================================[ tmp store locations ]=== */
/*
* emergency_print temporary stores
*/
#define EMERGENCY_PRINT_STORE_GPR4 l.sw 0x20(r0),r4
#define EMERGENCY_PRINT_LOAD_GPR4 l.lwz r4,0x20(r0)
#define EMERGENCY_PRINT_STORE_GPR5 l.sw 0x24(r0),r5
#define EMERGENCY_PRINT_LOAD_GPR5 l.lwz r5,0x24(r0)
#define EMERGENCY_PRINT_STORE_GPR6 l.sw 0x28(r0),r6
#define EMERGENCY_PRINT_LOAD_GPR6 l.lwz r6,0x28(r0)
#define EMERGENCY_PRINT_STORE_GPR7 l.sw 0x2c(r0),r7
#define EMERGENCY_PRINT_LOAD_GPR7 l.lwz r7,0x2c(r0)
#define EMERGENCY_PRINT_STORE_GPR8 l.sw 0x30(r0),r8
#define EMERGENCY_PRINT_LOAD_GPR8 l.lwz r8,0x30(r0)
#define EMERGENCY_PRINT_STORE_GPR9 l.sw 0x34(r0),r9
#define EMERGENCY_PRINT_LOAD_GPR9 l.lwz r9,0x34(r0)
/*
* TLB miss handlers temorary stores
*/
#define EXCEPTION_STORE_GPR9 l.sw 0x10(r0),r9
#define EXCEPTION_LOAD_GPR9 l.lwz r9,0x10(r0)
#define EXCEPTION_STORE_GPR2 l.sw 0x64(r0),r2
#define EXCEPTION_LOAD_GPR2 l.lwz r2,0x64(r0)
#define EXCEPTION_STORE_GPR3 l.sw 0x68(r0),r3
#define EXCEPTION_LOAD_GPR3 l.lwz r3,0x68(r0)
#define EXCEPTION_STORE_GPR4 l.sw 0x6c(r0),r4
#define EXCEPTION_LOAD_GPR4 l.lwz r4,0x6c(r0)
#define EXCEPTION_STORE_GPR5 l.sw 0x70(r0),r5
#define EXCEPTION_LOAD_GPR5 l.lwz r5,0x70(r0)
#define EXCEPTION_STORE_GPR6 l.sw 0x74(r0),r6
#define EXCEPTION_LOAD_GPR6 l.lwz r6,0x74(r0)
/*
* EXCEPTION_HANDLE temporary stores
*/
#define EXCEPTION_T_STORE_GPR30 l.sw 0x78(r0),r30
#define EXCEPTION_T_LOAD_GPR30(reg) l.lwz reg,0x78(r0)
#define EXCEPTION_T_STORE_GPR10 l.sw 0x7c(r0),r10
#define EXCEPTION_T_LOAD_GPR10(reg) l.lwz reg,0x7c(r0)
#define EXCEPTION_T_STORE_SP l.sw 0x80(r0),r1
#define EXCEPTION_T_LOAD_SP(reg) l.lwz reg,0x80(r0)
/*
* For UNHANLDED_EXCEPTION
*/
#define EXCEPTION_T_STORE_GPR31 l.sw 0x84(r0),r31
#define EXCEPTION_T_LOAD_GPR31(reg) l.lwz reg,0x84(r0)
/* =========================================================[ macros ]=== */
#define GET_CURRENT_PGD(reg,t1) \
LOAD_SYMBOL_2_GPR(reg,current_pgd) ;\
tophys (t1,reg) ;\
l.lwz reg,0(t1)
/*
* DSCR: this is a common hook for handling exceptions. it will save
* the needed registers, set up stack and pointer to current
* then jump to the handler while enabling MMU
*
* PRMS: handler - a function to jump to. it has to save the
* remaining registers to kernel stack, call
* appropriate arch-independant exception handler
* and finaly jump to ret_from_except
*
* PREQ: unchanged state from the time exception happened
*
* POST: SAVED the following registers original value
* to the new created exception frame pointed to by r1
*
* r1 - ksp pointing to the new (exception) frame
* r4 - EEAR exception EA
* r10 - current pointing to current_thread_info struct
* r12 - syscall 0, since we didn't come from syscall
* r13 - temp it actually contains new SR, not needed anymore
* r31 - handler address of the handler we'll jump to
*
* handler has to save remaining registers to the exception
* ksp frame *before* tainting them!
*
* NOTE: this function is not reentrant per se. reentrancy is guaranteed
* by processor disabling all exceptions/interrupts when exception
* accours.
*
* OPTM: no need to make it so wasteful to extract ksp when in user mode
*/
#define EXCEPTION_HANDLE(handler) \
EXCEPTION_T_STORE_GPR30 ;\
l.mfspr r30,r0,SPR_ESR_BASE ;\
l.andi r30,r30,SPR_SR_SM ;\
l.sfeqi r30,0 ;\
EXCEPTION_T_STORE_GPR10 ;\
l.bnf 2f /* kernel_mode */ ;\
EXCEPTION_T_STORE_SP /* delay slot */ ;\
1: /* user_mode: */ ;\
LOAD_SYMBOL_2_GPR(r1,current_thread_info_set) ;\
tophys (r30,r1) ;\
/* r10: current_thread_info */ ;\
l.lwz r10,0(r30) ;\
tophys (r30,r10) ;\
l.lwz r1,(TI_KSP)(r30) ;\
/* fall through */ ;\
2: /* kernel_mode: */ ;\
/* create new stack frame, save only needed gprs */ ;\
/* r1: KSP, r10: current, r4: EEAR, r31: __pa(KSP) */ ;\
/* r12: temp, syscall indicator */ ;\
l.addi r1,r1,-(INT_FRAME_SIZE) ;\
/* r1 is KSP, r30 is __pa(KSP) */ ;\
tophys (r30,r1) ;\
l.sw PT_GPR12(r30),r12 ;\
l.mfspr r12,r0,SPR_EPCR_BASE ;\
l.sw PT_PC(r30),r12 ;\
l.mfspr r12,r0,SPR_ESR_BASE ;\
l.sw PT_SR(r30),r12 ;\
/* save r30 */ ;\
EXCEPTION_T_LOAD_GPR30(r12) ;\
l.sw PT_GPR30(r30),r12 ;\
/* save r10 as was prior to exception */ ;\
EXCEPTION_T_LOAD_GPR10(r12) ;\
l.sw PT_GPR10(r30),r12 ;\
/* save PT_SP as was prior to exception */ ;\
EXCEPTION_T_LOAD_SP(r12) ;\
l.sw PT_SP(r30),r12 ;\
/* save exception r4, set r4 = EA */ ;\
l.sw PT_GPR4(r30),r4 ;\
l.mfspr r4,r0,SPR_EEAR_BASE ;\
/* r12 == 1 if we come from syscall */ ;\
CLEAR_GPR(r12) ;\
/* ----- turn on MMU ----- */ ;\
l.ori r30,r0,(EXCEPTION_SR) ;\
l.mtspr r0,r30,SPR_ESR_BASE ;\
/* r30: EA address of handler */ ;\
LOAD_SYMBOL_2_GPR(r30,handler) ;\
l.mtspr r0,r30,SPR_EPCR_BASE ;\
l.rfe
/*
* this doesn't work
*
*
* #ifdef CONFIG_JUMP_UPON_UNHANDLED_EXCEPTION
* #define UNHANDLED_EXCEPTION(handler) \
* l.ori r3,r0,0x1 ;\
* l.mtspr r0,r3,SPR_SR ;\
* l.movhi r3,hi(0xf0000100) ;\
* l.ori r3,r3,lo(0xf0000100) ;\
* l.jr r3 ;\
* l.nop 1
*
* #endif
*/
/* DSCR: this is the same as EXCEPTION_HANDLE(), we are just
* a bit more carefull (if we have a PT_SP or current pointer
* corruption) and set them up from 'current_set'
*
*/
#define UNHANDLED_EXCEPTION(handler) \
EXCEPTION_T_STORE_GPR31 ;\
EXCEPTION_T_STORE_GPR10 ;\
EXCEPTION_T_STORE_SP ;\
/* temporary store r3, r9 into r1, r10 */ ;\
l.addi r1,r3,0x0 ;\
l.addi r10,r9,0x0 ;\
/* the string referenced by r3 must be low enough */ ;\
l.jal _emergency_print ;\
l.ori r3,r0,lo(_string_unhandled_exception) ;\
l.mfspr r3,r0,SPR_NPC ;\
l.jal _emergency_print_nr ;\
l.andi r3,r3,0x1f00 ;\
/* the string referenced by r3 must be low enough */ ;\
l.jal _emergency_print ;\
l.ori r3,r0,lo(_string_epc_prefix) ;\
l.jal _emergency_print_nr ;\
l.mfspr r3,r0,SPR_EPCR_BASE ;\
l.jal _emergency_print ;\
l.ori r3,r0,lo(_string_nl) ;\
/* end of printing */ ;\
l.addi r3,r1,0x0 ;\
l.addi r9,r10,0x0 ;\
/* extract current, ksp from current_set */ ;\
LOAD_SYMBOL_2_GPR(r1,_unhandled_stack_top) ;\
LOAD_SYMBOL_2_GPR(r10,init_thread_union) ;\
/* create new stack frame, save only needed gprs */ ;\
/* r1: KSP, r10: current, r31: __pa(KSP) */ ;\
/* r12: temp, syscall indicator, r13 temp */ ;\
l.addi r1,r1,-(INT_FRAME_SIZE) ;\
/* r1 is KSP, r31 is __pa(KSP) */ ;\
tophys (r31,r1) ;\
l.sw PT_GPR12(r31),r12 ;\
l.mfspr r12,r0,SPR_EPCR_BASE ;\
l.sw PT_PC(r31),r12 ;\
l.mfspr r12,r0,SPR_ESR_BASE ;\
l.sw PT_SR(r31),r12 ;\
/* save r31 */ ;\
EXCEPTION_T_LOAD_GPR31(r12) ;\
l.sw PT_GPR31(r31),r12 ;\
/* save r10 as was prior to exception */ ;\
EXCEPTION_T_LOAD_GPR10(r12) ;\
l.sw PT_GPR10(r31),r12 ;\
/* save PT_SP as was prior to exception */ ;\
EXCEPTION_T_LOAD_SP(r12) ;\
l.sw PT_SP(r31),r12 ;\
l.sw PT_GPR13(r31),r13 ;\
/* --> */ ;\
/* save exception r4, set r4 = EA */ ;\
l.sw PT_GPR4(r31),r4 ;\
l.mfspr r4,r0,SPR_EEAR_BASE ;\
/* r12 == 1 if we come from syscall */ ;\
CLEAR_GPR(r12) ;\
/* ----- play a MMU trick ----- */ ;\
l.ori r31,r0,(EXCEPTION_SR) ;\
l.mtspr r0,r31,SPR_ESR_BASE ;\
/* r31: EA address of handler */ ;\
LOAD_SYMBOL_2_GPR(r31,handler) ;\
l.mtspr r0,r31,SPR_EPCR_BASE ;\
l.rfe
/* =====================================================[ exceptions] === */
/* ---[ 0x100: RESET exception ]----------------------------------------- */
.org 0x100
/* Jump to .init code at _start which lives in the .head section
* and will be discarded after boot.
*/
LOAD_SYMBOL_2_GPR(r15, _start)
tophys (r13,r15) /* MMU disabled */
l.jr r13
l.nop
/* ---[ 0x200: BUS exception ]------------------------------------------- */
.org 0x200
_dispatch_bus_fault:
EXCEPTION_HANDLE(_bus_fault_handler)
/* ---[ 0x300: Data Page Fault exception ]------------------------------- */
.org 0x300
_dispatch_do_dpage_fault:
// totaly disable timer interrupt
// l.mtspr r0,r0,SPR_TTMR
// DEBUG_TLB_PROBE(0x300)
// EXCEPTION_DEBUG_VALUE_ER_ENABLED(0x300)
EXCEPTION_HANDLE(_data_page_fault_handler)
/* ---[ 0x400: Insn Page Fault exception ]------------------------------- */
.org 0x400
_dispatch_do_ipage_fault:
// totaly disable timer interrupt
// l.mtspr r0,r0,SPR_TTMR
// DEBUG_TLB_PROBE(0x400)
// EXCEPTION_DEBUG_VALUE_ER_ENABLED(0x400)
EXCEPTION_HANDLE(_insn_page_fault_handler)
/* ---[ 0x500: Timer exception ]----------------------------------------- */
.org 0x500
EXCEPTION_HANDLE(_timer_handler)
/* ---[ 0x600: Alignment exception ]-------------------------------------- */
.org 0x600
EXCEPTION_HANDLE(_alignment_handler)
/* ---[ 0x700: Illegal insn exception ]---------------------------------- */
.org 0x700
EXCEPTION_HANDLE(_illegal_instruction_handler)
/* ---[ 0x800: External interrupt exception ]---------------------------- */
.org 0x800
EXCEPTION_HANDLE(_external_irq_handler)
/* ---[ 0x900: DTLB miss exception ]------------------------------------- */
.org 0x900
l.j boot_dtlb_miss_handler
l.nop
/* ---[ 0xa00: ITLB miss exception ]------------------------------------- */
.org 0xa00
l.j boot_itlb_miss_handler
l.nop
/* ---[ 0xb00: Range exception ]----------------------------------------- */
.org 0xb00
UNHANDLED_EXCEPTION(_vector_0xb00)
/* ---[ 0xc00: Syscall exception ]--------------------------------------- */
.org 0xc00
EXCEPTION_HANDLE(_sys_call_handler)
/* ---[ 0xd00: Trap exception ]------------------------------------------ */
.org 0xd00
UNHANDLED_EXCEPTION(_vector_0xd00)
/* ---[ 0xe00: Trap exception ]------------------------------------------ */
.org 0xe00
// UNHANDLED_EXCEPTION(_vector_0xe00)
EXCEPTION_HANDLE(_trap_handler)
/* ---[ 0xf00: Reserved exception ]-------------------------------------- */
.org 0xf00
UNHANDLED_EXCEPTION(_vector_0xf00)
/* ---[ 0x1000: Reserved exception ]------------------------------------- */
.org 0x1000
UNHANDLED_EXCEPTION(_vector_0x1000)
/* ---[ 0x1100: Reserved exception ]------------------------------------- */
.org 0x1100
UNHANDLED_EXCEPTION(_vector_0x1100)
/* ---[ 0x1200: Reserved exception ]------------------------------------- */
.org 0x1200
UNHANDLED_EXCEPTION(_vector_0x1200)
/* ---[ 0x1300: Reserved exception ]------------------------------------- */
.org 0x1300
UNHANDLED_EXCEPTION(_vector_0x1300)
/* ---[ 0x1400: Reserved exception ]------------------------------------- */
.org 0x1400
UNHANDLED_EXCEPTION(_vector_0x1400)
/* ---[ 0x1500: Reserved exception ]------------------------------------- */
.org 0x1500
UNHANDLED_EXCEPTION(_vector_0x1500)
/* ---[ 0x1600: Reserved exception ]------------------------------------- */
.org 0x1600
UNHANDLED_EXCEPTION(_vector_0x1600)
/* ---[ 0x1700: Reserved exception ]------------------------------------- */
.org 0x1700
UNHANDLED_EXCEPTION(_vector_0x1700)
/* ---[ 0x1800: Reserved exception ]------------------------------------- */
.org 0x1800
UNHANDLED_EXCEPTION(_vector_0x1800)
/* ---[ 0x1900: Reserved exception ]------------------------------------- */
.org 0x1900
UNHANDLED_EXCEPTION(_vector_0x1900)
/* ---[ 0x1a00: Reserved exception ]------------------------------------- */
.org 0x1a00
UNHANDLED_EXCEPTION(_vector_0x1a00)
/* ---[ 0x1b00: Reserved exception ]------------------------------------- */
.org 0x1b00
UNHANDLED_EXCEPTION(_vector_0x1b00)
/* ---[ 0x1c00: Reserved exception ]------------------------------------- */
.org 0x1c00
UNHANDLED_EXCEPTION(_vector_0x1c00)
/* ---[ 0x1d00: Reserved exception ]------------------------------------- */
.org 0x1d00
UNHANDLED_EXCEPTION(_vector_0x1d00)
/* ---[ 0x1e00: Reserved exception ]------------------------------------- */
.org 0x1e00
UNHANDLED_EXCEPTION(_vector_0x1e00)
/* ---[ 0x1f00: Reserved exception ]------------------------------------- */
.org 0x1f00
UNHANDLED_EXCEPTION(_vector_0x1f00)
.org 0x2000
/* ===================================================[ kernel start ]=== */
/* .text*/
/* This early stuff belongs in HEAD, but some of the functions below definitely
* don't... */
__HEAD
.global _start
_start:
/* Init r0 to zero as per spec */
CLEAR_GPR(r0)
/* save kernel parameters */
l.or r25,r0,r3 /* pointer to fdt */
/*
* ensure a deterministic start
*/
l.ori r3,r0,0x1
l.mtspr r0,r3,SPR_SR
CLEAR_GPR(r1)
CLEAR_GPR(r2)
CLEAR_GPR(r3)
CLEAR_GPR(r4)
CLEAR_GPR(r5)
CLEAR_GPR(r6)
CLEAR_GPR(r7)
CLEAR_GPR(r8)
CLEAR_GPR(r9)
CLEAR_GPR(r10)
CLEAR_GPR(r11)
CLEAR_GPR(r12)
CLEAR_GPR(r13)
CLEAR_GPR(r14)
CLEAR_GPR(r15)
CLEAR_GPR(r16)
CLEAR_GPR(r17)
CLEAR_GPR(r18)
CLEAR_GPR(r19)
CLEAR_GPR(r20)
CLEAR_GPR(r21)
CLEAR_GPR(r22)
CLEAR_GPR(r23)
CLEAR_GPR(r24)
CLEAR_GPR(r26)
CLEAR_GPR(r27)
CLEAR_GPR(r28)
CLEAR_GPR(r29)
CLEAR_GPR(r30)
CLEAR_GPR(r31)
/*
* set up initial ksp and current
*/
/* setup kernel stack */
LOAD_SYMBOL_2_GPR(r1,init_thread_union + THREAD_SIZE)
LOAD_SYMBOL_2_GPR(r10,init_thread_union) // setup current
tophys (r31,r10)
l.sw TI_KSP(r31), r1
l.ori r4,r0,0x0
/*
* .data contains initialized data,
* .bss contains uninitialized data - clear it up
*/
clear_bss:
LOAD_SYMBOL_2_GPR(r24, __bss_start)
LOAD_SYMBOL_2_GPR(r26, _end)
tophys(r28,r24)
tophys(r30,r26)
CLEAR_GPR(r24)
CLEAR_GPR(r26)
1:
l.sw (0)(r28),r0
l.sfltu r28,r30
l.bf 1b
l.addi r28,r28,4
enable_ic:
l.jal _ic_enable
l.nop
enable_dc:
l.jal _dc_enable
l.nop
flush_tlb:
l.jal _flush_tlb
l.nop
/* The MMU needs to be enabled before or32_early_setup is called */
enable_mmu:
/*
* enable dmmu & immu
* SR[5] = 0, SR[6] = 0, 6th and 7th bit of SR set to 0
*/
l.mfspr r30,r0,SPR_SR
l.movhi r28,hi(SPR_SR_DME | SPR_SR_IME)
l.ori r28,r28,lo(SPR_SR_DME | SPR_SR_IME)
l.or r30,r30,r28
l.mtspr r0,r30,SPR_SR
l.nop
l.nop
l.nop
l.nop
l.nop
l.nop
l.nop
l.nop
l.nop
l.nop
l.nop
l.nop
l.nop
l.nop
l.nop
l.nop
// reset the simulation counters
l.nop 5
/* check fdt header magic word */
l.lwz r3,0(r25) /* load magic from fdt into r3 */
l.movhi r4,hi(OF_DT_HEADER)
l.ori r4,r4,lo(OF_DT_HEADER)
l.sfeq r3,r4
l.bf _fdt_found
l.nop
/* magic number mismatch, set fdt pointer to null */
l.or r25,r0,r0
_fdt_found:
/* pass fdt pointer to or32_early_setup in r3 */
l.or r3,r0,r25
LOAD_SYMBOL_2_GPR(r24, or32_early_setup)
l.jalr r24
l.nop
clear_regs:
/*
* clear all GPRS to increase determinism
*/
CLEAR_GPR(r2)
CLEAR_GPR(r3)
CLEAR_GPR(r4)
CLEAR_GPR(r5)
CLEAR_GPR(r6)
CLEAR_GPR(r7)
CLEAR_GPR(r8)
CLEAR_GPR(r9)
CLEAR_GPR(r11)
CLEAR_GPR(r12)
CLEAR_GPR(r13)
CLEAR_GPR(r14)
CLEAR_GPR(r15)
CLEAR_GPR(r16)
CLEAR_GPR(r17)
CLEAR_GPR(r18)
CLEAR_GPR(r19)
CLEAR_GPR(r20)
CLEAR_GPR(r21)
CLEAR_GPR(r22)
CLEAR_GPR(r23)
CLEAR_GPR(r24)
CLEAR_GPR(r25)
CLEAR_GPR(r26)
CLEAR_GPR(r27)
CLEAR_GPR(r28)
CLEAR_GPR(r29)
CLEAR_GPR(r30)
CLEAR_GPR(r31)
jump_start_kernel:
/*
* jump to kernel entry (start_kernel)
*/
LOAD_SYMBOL_2_GPR(r30, start_kernel)
l.jr r30
l.nop
_flush_tlb:
/*
* I N V A L I D A T E T L B e n t r i e s
*/
LOAD_SYMBOL_2_GPR(r5,SPR_DTLBMR_BASE(0))
LOAD_SYMBOL_2_GPR(r6,SPR_ITLBMR_BASE(0))
l.addi r7,r0,128 /* Maximum number of sets */
1:
l.mtspr r5,r0,0x0
l.mtspr r6,r0,0x0
l.addi r5,r5,1
l.addi r6,r6,1
l.sfeq r7,r0
l.bnf 1b
l.addi r7,r7,-1
l.jr r9
l.nop
/* ========================================[ cache ]=== */
/* alignment here so we don't change memory offsets with
* memory controller defined
*/
.align 0x2000
_ic_enable:
/* Check if IC present and skip enabling otherwise */
l.mfspr r24,r0,SPR_UPR
l.andi r26,r24,SPR_UPR_ICP
l.sfeq r26,r0
l.bf 9f
l.nop
/* Disable IC */
l.mfspr r6,r0,SPR_SR
l.addi r5,r0,-1
l.xori r5,r5,SPR_SR_ICE
l.and r5,r6,r5
l.mtspr r0,r5,SPR_SR
/* Establish cache block size
If BS=0, 16;
If BS=1, 32;
r14 contain block size
*/
l.mfspr r24,r0,SPR_ICCFGR
l.andi r26,r24,SPR_ICCFGR_CBS
l.srli r28,r26,7
l.ori r30,r0,16
l.sll r14,r30,r28
/* Establish number of cache sets
r16 contains number of cache sets
r28 contains log(# of cache sets)
*/
l.andi r26,r24,SPR_ICCFGR_NCS
l.srli r28,r26,3
l.ori r30,r0,1
l.sll r16,r30,r28
/* Invalidate IC */
l.addi r6,r0,0
l.sll r5,r14,r28
// l.mul r5,r14,r16
// l.trap 1
// l.addi r5,r0,IC_SIZE
1:
l.mtspr r0,r6,SPR_ICBIR
l.sfne r6,r5
l.bf 1b
l.add r6,r6,r14
// l.addi r6,r6,IC_LINE
/* Enable IC */
l.mfspr r6,r0,SPR_SR
l.ori r6,r6,SPR_SR_ICE
l.mtspr r0,r6,SPR_SR
l.nop
l.nop
l.nop
l.nop
l.nop
l.nop
l.nop
l.nop
l.nop
l.nop
9:
l.jr r9
l.nop
_dc_enable:
/* Check if DC present and skip enabling otherwise */
l.mfspr r24,r0,SPR_UPR
l.andi r26,r24,SPR_UPR_DCP
l.sfeq r26,r0
l.bf 9f
l.nop
/* Disable DC */
l.mfspr r6,r0,SPR_SR
l.addi r5,r0,-1
l.xori r5,r5,SPR_SR_DCE
l.and r5,r6,r5
l.mtspr r0,r5,SPR_SR
/* Establish cache block size
If BS=0, 16;
If BS=1, 32;
r14 contain block size
*/
l.mfspr r24,r0,SPR_DCCFGR
l.andi r26,r24,SPR_DCCFGR_CBS
l.srli r28,r26,7
l.ori r30,r0,16
l.sll r14,r30,r28
/* Establish number of cache sets
r16 contains number of cache sets
r28 contains log(# of cache sets)
*/
l.andi r26,r24,SPR_DCCFGR_NCS
l.srli r28,r26,3
l.ori r30,r0,1
l.sll r16,r30,r28
/* Invalidate DC */
l.addi r6,r0,0
l.sll r5,r14,r28
1:
l.mtspr r0,r6,SPR_DCBIR
l.sfne r6,r5
l.bf 1b
l.add r6,r6,r14
/* Enable DC */
l.mfspr r6,r0,SPR_SR
l.ori r6,r6,SPR_SR_DCE
l.mtspr r0,r6,SPR_SR
9:
l.jr r9
l.nop
/* ===============================================[ page table masks ]=== */
#define DTLB_UP_CONVERT_MASK 0x3fa
#define ITLB_UP_CONVERT_MASK 0x3a
/* for SMP we'd have (this is a bit subtle, CC must be always set
* for SMP, but since we have _PAGE_PRESENT bit always defined
* we can just modify the mask)
*/
#define DTLB_SMP_CONVERT_MASK 0x3fb
#define ITLB_SMP_CONVERT_MASK 0x3b
/* ---[ boot dtlb miss handler ]----------------------------------------- */
boot_dtlb_miss_handler:
/* mask for DTLB_MR register: - (0) sets V (valid) bit,
* - (31-12) sets bits belonging to VPN (31-12)
*/
#define DTLB_MR_MASK 0xfffff001
/* mask for DTLB_TR register: - (2) sets CI (cache inhibit) bit,
* - (4) sets A (access) bit,
* - (5) sets D (dirty) bit,
* - (8) sets SRE (superuser read) bit
* - (9) sets SWE (superuser write) bit
* - (31-12) sets bits belonging to VPN (31-12)
*/
#define DTLB_TR_MASK 0xfffff332
/* These are for masking out the VPN/PPN value from the MR/TR registers...
* it's not the same as the PFN */
#define VPN_MASK 0xfffff000
#define PPN_MASK 0xfffff000
EXCEPTION_STORE_GPR6
#if 0
l.mfspr r6,r0,SPR_ESR_BASE //
l.andi r6,r6,SPR_SR_SM // are we in kernel mode ?
l.sfeqi r6,0 // r6 == 0x1 --> SM
l.bf exit_with_no_dtranslation //
l.nop
#endif
/* this could be optimized by moving storing of
* non r6 registers here, and jumping r6 restore
* if not in supervisor mode
*/
EXCEPTION_STORE_GPR2
EXCEPTION_STORE_GPR3
EXCEPTION_STORE_GPR4
EXCEPTION_STORE_GPR5
l.mfspr r4,r0,SPR_EEAR_BASE // get the offending EA
immediate_translation:
CLEAR_GPR(r6)
l.srli r3,r4,0xd // r3 <- r4 / 8192 (sets are relative to page size (8Kb) NOT VPN size (4Kb)
l.mfspr r6, r0, SPR_DMMUCFGR
l.andi r6, r6, SPR_DMMUCFGR_NTS
l.srli r6, r6, SPR_DMMUCFGR_NTS_OFF
l.ori r5, r0, 0x1
l.sll r5, r5, r6 // r5 = number DMMU sets
l.addi r6, r5, -1 // r6 = nsets mask
l.and r2, r3, r6 // r2 <- r3 % NSETS_MASK
l.or r6,r6,r4 // r6 <- r4
l.ori r6,r6,~(VPN_MASK) // r6 <- VPN :VPN .xfff - clear up lo(r6) to 0x**** *fff
l.movhi r5,hi(DTLB_MR_MASK) // r5 <- ffff:0000.x000
l.ori r5,r5,lo(DTLB_MR_MASK) // r5 <- ffff:1111.x001 - apply DTLB_MR_MASK
l.and r5,r5,r6 // r5 <- VPN :VPN .x001 - we have DTLBMR entry
l.mtspr r2,r5,SPR_DTLBMR_BASE(0) // set DTLBMR
/* set up DTLB with no translation for EA <= 0xbfffffff */
LOAD_SYMBOL_2_GPR(r6,0xbfffffff)
l.sfgeu r6,r4 // flag if r6 >= r4 (if 0xbfffffff >= EA)
l.bf 1f // goto out
l.and r3,r4,r4 // delay slot :: 24 <- r4 (if flag==1)
tophys(r3,r4) // r3 <- PA
1:
l.ori r3,r3,~(PPN_MASK) // r3 <- PPN :PPN .xfff - clear up lo(r6) to 0x**** *fff
l.movhi r5,hi(DTLB_TR_MASK) // r5 <- ffff:0000.x000
l.ori r5,r5,lo(DTLB_TR_MASK) // r5 <- ffff:1111.x330 - apply DTLB_MR_MASK
l.and r5,r5,r3 // r5 <- PPN :PPN .x330 - we have DTLBTR entry
l.mtspr r2,r5,SPR_DTLBTR_BASE(0) // set DTLBTR
EXCEPTION_LOAD_GPR6
EXCEPTION_LOAD_GPR5
EXCEPTION_LOAD_GPR4
EXCEPTION_LOAD_GPR3
EXCEPTION_LOAD_GPR2
l.rfe // SR <- ESR, PC <- EPC
exit_with_no_dtranslation:
/* EA out of memory or not in supervisor mode */
EXCEPTION_LOAD_GPR6
EXCEPTION_LOAD_GPR4
l.j _dispatch_bus_fault
/* ---[ boot itlb miss handler ]----------------------------------------- */
boot_itlb_miss_handler:
/* mask for ITLB_MR register: - sets V (valid) bit,
* - sets bits belonging to VPN (15-12)
*/
#define ITLB_MR_MASK 0xfffff001
/* mask for ITLB_TR register: - sets A (access) bit,
* - sets SXE (superuser execute) bit
* - sets bits belonging to VPN (15-12)
*/
#define ITLB_TR_MASK 0xfffff050
/*
#define VPN_MASK 0xffffe000
#define PPN_MASK 0xffffe000
*/
EXCEPTION_STORE_GPR2
EXCEPTION_STORE_GPR3
EXCEPTION_STORE_GPR4
EXCEPTION_STORE_GPR5
EXCEPTION_STORE_GPR6
#if 0
l.mfspr r6,r0,SPR_ESR_BASE //
l.andi r6,r6,SPR_SR_SM // are we in kernel mode ?
l.sfeqi r6,0 // r6 == 0x1 --> SM
l.bf exit_with_no_itranslation
l.nop
#endif
l.mfspr r4,r0,SPR_EEAR_BASE // get the offending EA
earlyearly:
CLEAR_GPR(r6)
l.srli r3,r4,0xd // r3 <- r4 / 8192 (sets are relative to page size (8Kb) NOT VPN size (4Kb)
l.mfspr r6, r0, SPR_IMMUCFGR
l.andi r6, r6, SPR_IMMUCFGR_NTS
l.srli r6, r6, SPR_IMMUCFGR_NTS_OFF
l.ori r5, r0, 0x1
l.sll r5, r5, r6 // r5 = number IMMU sets from IMMUCFGR
l.addi r6, r5, -1 // r6 = nsets mask
l.and r2, r3, r6 // r2 <- r3 % NSETS_MASK
l.or r6,r6,r4 // r6 <- r4
l.ori r6,r6,~(VPN_MASK) // r6 <- VPN :VPN .xfff - clear up lo(r6) to 0x**** *fff
l.movhi r5,hi(ITLB_MR_MASK) // r5 <- ffff:0000.x000
l.ori r5,r5,lo(ITLB_MR_MASK) // r5 <- ffff:1111.x001 - apply ITLB_MR_MASK
l.and r5,r5,r6 // r5 <- VPN :VPN .x001 - we have ITLBMR entry
l.mtspr r2,r5,SPR_ITLBMR_BASE(0) // set ITLBMR
/*
* set up ITLB with no translation for EA <= 0x0fffffff
*
* we need this for head.S mapping (EA = PA). if we move all functions
* which run with mmu enabled into entry.S, we might be able to eliminate this.
*
*/
LOAD_SYMBOL_2_GPR(r6,0x0fffffff)
l.sfgeu r6,r4 // flag if r6 >= r4 (if 0xb0ffffff >= EA)
l.bf 1f // goto out
l.and r3,r4,r4 // delay slot :: 24 <- r4 (if flag==1)
tophys(r3,r4) // r3 <- PA
1:
l.ori r3,r3,~(PPN_MASK) // r3 <- PPN :PPN .xfff - clear up lo(r6) to 0x**** *fff
l.movhi r5,hi(ITLB_TR_MASK) // r5 <- ffff:0000.x000
l.ori r5,r5,lo(ITLB_TR_MASK) // r5 <- ffff:1111.x050 - apply ITLB_MR_MASK
l.and r5,r5,r3 // r5 <- PPN :PPN .x050 - we have ITLBTR entry
l.mtspr r2,r5,SPR_ITLBTR_BASE(0) // set ITLBTR
EXCEPTION_LOAD_GPR6
EXCEPTION_LOAD_GPR5
EXCEPTION_LOAD_GPR4
EXCEPTION_LOAD_GPR3
EXCEPTION_LOAD_GPR2
l.rfe // SR <- ESR, PC <- EPC
exit_with_no_itranslation:
EXCEPTION_LOAD_GPR4
EXCEPTION_LOAD_GPR6
l.j _dispatch_bus_fault
l.nop
/* ====================================================================== */
/*
* Stuff below here shouldn't go into .head section... maybe this stuff
* can be moved to entry.S ???
*/
/* ==============================================[ DTLB miss handler ]=== */
/*
* Comments:
* Exception handlers are entered with MMU off so the following handler
* needs to use physical addressing
*
*/
.text
ENTRY(dtlb_miss_handler)
EXCEPTION_STORE_GPR2
EXCEPTION_STORE_GPR3
EXCEPTION_STORE_GPR4
/*
* get EA of the miss
*/
l.mfspr r2,r0,SPR_EEAR_BASE
/*
* pmd = (pmd_t *)(current_pgd + pgd_index(daddr));
*/
GET_CURRENT_PGD(r3,r4) // r3 is current_pgd, r4 is temp
l.srli r4,r2,0x18 // >> PAGE_SHIFT + (PAGE_SHIFT - 2)
l.slli r4,r4,0x2 // to get address << 2
l.add r3,r4,r3 // r4 is pgd_index(daddr)
/*
* if (pmd_none(*pmd))
* goto pmd_none:
*/
tophys (r4,r3)
l.lwz r3,0x0(r4) // get *pmd value
l.sfne r3,r0
l.bnf d_pmd_none
l.addi r3,r0,0xffffe000 // PAGE_MASK
d_pmd_good:
/*
* pte = *pte_offset(pmd, daddr);
*/
l.lwz r4,0x0(r4) // get **pmd value
l.and r4,r4,r3 // & PAGE_MASK
l.srli r2,r2,0xd // >> PAGE_SHIFT, r2 == EEAR
l.andi r3,r2,0x7ff // (1UL << PAGE_SHIFT - 2) - 1
l.slli r3,r3,0x2 // to get address << 2
l.add r3,r3,r4
l.lwz r3,0x0(r3) // this is pte at last
/*
* if (!pte_present(pte))
*/
l.andi r4,r3,0x1
l.sfne r4,r0 // is pte present
l.bnf d_pte_not_present
l.addi r4,r0,0xffffe3fa // PAGE_MASK | DTLB_UP_CONVERT_MASK
/*
* fill DTLB TR register
*/
l.and r4,r3,r4 // apply the mask
// Determine number of DMMU sets
l.mfspr r2, r0, SPR_DMMUCFGR
l.andi r2, r2, SPR_DMMUCFGR_NTS
l.srli r2, r2, SPR_DMMUCFGR_NTS_OFF
l.ori r3, r0, 0x1
l.sll r3, r3, r2 // r3 = number DMMU sets DMMUCFGR
l.addi r2, r3, -1 // r2 = nsets mask
l.mfspr r3, r0, SPR_EEAR_BASE
l.srli r3, r3, 0xd // >> PAGE_SHIFT
l.and r2, r3, r2 // calc offset: & (NUM_TLB_ENTRIES-1)
//NUM_TLB_ENTRIES
l.mtspr r2,r4,SPR_DTLBTR_BASE(0)
/*
* fill DTLB MR register
*/
l.slli r3, r3, 0xd /* << PAGE_SHIFT => EA & PAGE_MASK */
l.ori r4,r3,0x1 // set hardware valid bit: DTBL_MR entry
l.mtspr r2,r4,SPR_DTLBMR_BASE(0)
EXCEPTION_LOAD_GPR2
EXCEPTION_LOAD_GPR3
EXCEPTION_LOAD_GPR4
l.rfe
d_pmd_none:
d_pte_not_present:
EXCEPTION_LOAD_GPR2
EXCEPTION_LOAD_GPR3
EXCEPTION_LOAD_GPR4
EXCEPTION_HANDLE(_dtlb_miss_page_fault_handler)
/* ==============================================[ ITLB miss handler ]=== */
ENTRY(itlb_miss_handler)
EXCEPTION_STORE_GPR2
EXCEPTION_STORE_GPR3
EXCEPTION_STORE_GPR4
/*
* get EA of the miss
*/
l.mfspr r2,r0,SPR_EEAR_BASE
/*
* pmd = (pmd_t *)(current_pgd + pgd_index(daddr));
*
*/
GET_CURRENT_PGD(r3,r4) // r3 is current_pgd, r5 is temp
l.srli r4,r2,0x18 // >> PAGE_SHIFT + (PAGE_SHIFT - 2)
l.slli r4,r4,0x2 // to get address << 2
l.add r3,r4,r3 // r4 is pgd_index(daddr)
/*
* if (pmd_none(*pmd))
* goto pmd_none:
*/
tophys (r4,r3)
l.lwz r3,0x0(r4) // get *pmd value
l.sfne r3,r0
l.bnf i_pmd_none
l.addi r3,r0,0xffffe000 // PAGE_MASK
i_pmd_good:
/*
* pte = *pte_offset(pmd, iaddr);
*
*/
l.lwz r4,0x0(r4) // get **pmd value
l.and r4,r4,r3 // & PAGE_MASK
l.srli r2,r2,0xd // >> PAGE_SHIFT, r2 == EEAR
l.andi r3,r2,0x7ff // (1UL << PAGE_SHIFT - 2) - 1
l.slli r3,r3,0x2 // to get address << 2
l.add r3,r3,r4
l.lwz r3,0x0(r3) // this is pte at last
/*
* if (!pte_present(pte))
*
*/
l.andi r4,r3,0x1
l.sfne r4,r0 // is pte present
l.bnf i_pte_not_present
l.addi r4,r0,0xffffe03a // PAGE_MASK | ITLB_UP_CONVERT_MASK
/*
* fill ITLB TR register
*/
l.and r4,r3,r4 // apply the mask
l.andi r3,r3,0x7c0 // _PAGE_EXEC | _PAGE_SRE | _PAGE_SWE | _PAGE_URE | _PAGE_UWE
l.sfeq r3,r0
l.bf itlb_tr_fill //_workaround
// Determine number of IMMU sets
l.mfspr r2, r0, SPR_IMMUCFGR
l.andi r2, r2, SPR_IMMUCFGR_NTS
l.srli r2, r2, SPR_IMMUCFGR_NTS_OFF
l.ori r3, r0, 0x1
l.sll r3, r3, r2 // r3 = number IMMU sets IMMUCFGR
l.addi r2, r3, -1 // r2 = nsets mask
l.mfspr r3, r0, SPR_EEAR_BASE
l.srli r3, r3, 0xd // >> PAGE_SHIFT
l.and r2, r3, r2 // calc offset: & (NUM_TLB_ENTRIES-1)
/*
* __PHX__ :: fixme
* we should not just blindly set executable flags,
* but it does help with ping. the clean way would be to find out
* (and fix it) why stack doesn't have execution permissions
*/
itlb_tr_fill_workaround:
l.ori r4,r4,0xc0 // | (SPR_ITLBTR_UXE | ITLBTR_SXE)
itlb_tr_fill:
l.mtspr r2,r4,SPR_ITLBTR_BASE(0)
/*
* fill DTLB MR register
*/
l.slli r3, r3, 0xd /* << PAGE_SHIFT => EA & PAGE_MASK */
l.ori r4,r3,0x1 // set hardware valid bit: ITBL_MR entry
l.mtspr r2,r4,SPR_ITLBMR_BASE(0)
EXCEPTION_LOAD_GPR2
EXCEPTION_LOAD_GPR3
EXCEPTION_LOAD_GPR4
l.rfe
i_pmd_none:
i_pte_not_present:
EXCEPTION_LOAD_GPR2
EXCEPTION_LOAD_GPR3
EXCEPTION_LOAD_GPR4
EXCEPTION_HANDLE(_itlb_miss_page_fault_handler)
/* ==============================================[ boot tlb handlers ]=== */
/* =================================================[ debugging aids ]=== */
.align 64
_immu_trampoline:
.space 64
_immu_trampoline_top:
#define TRAMP_SLOT_0 (0x0)
#define TRAMP_SLOT_1 (0x4)
#define TRAMP_SLOT_2 (0x8)
#define TRAMP_SLOT_3 (0xc)
#define TRAMP_SLOT_4 (0x10)
#define TRAMP_SLOT_5 (0x14)
#define TRAMP_FRAME_SIZE (0x18)
ENTRY(_immu_trampoline_workaround)
// r2 EEA
// r6 is physical EEA
tophys(r6,r2)
LOAD_SYMBOL_2_GPR(r5,_immu_trampoline)
tophys (r3,r5) // r3 is trampoline (physical)
LOAD_SYMBOL_2_GPR(r4,0x15000000)
l.sw TRAMP_SLOT_0(r3),r4
l.sw TRAMP_SLOT_1(r3),r4
l.sw TRAMP_SLOT_4(r3),r4
l.sw TRAMP_SLOT_5(r3),r4
// EPC = EEA - 0x4
l.lwz r4,0x0(r6) // load op @ EEA + 0x0 (fc address)
l.sw TRAMP_SLOT_3(r3),r4 // store it to _immu_trampoline_data
l.lwz r4,-0x4(r6) // load op @ EEA - 0x4 (f8 address)
l.sw TRAMP_SLOT_2(r3),r4 // store it to _immu_trampoline_data
l.srli r5,r4,26 // check opcode for write access
l.sfeqi r5,0 // l.j
l.bf 0f
l.sfeqi r5,0x11 // l.jr
l.bf 1f
l.sfeqi r5,1 // l.jal
l.bf 2f
l.sfeqi r5,0x12 // l.jalr
l.bf 3f
l.sfeqi r5,3 // l.bnf
l.bf 4f
l.sfeqi r5,4 // l.bf
l.bf 5f
99:
l.nop
l.j 99b // should never happen
l.nop 1
// r2 is EEA
// r3 is trampoline address (physical)
// r4 is instruction
// r6 is physical(EEA)
//
// r5
2: // l.jal
/* 19 20 aa aa l.movhi r9,0xaaaa
* a9 29 bb bb l.ori r9,0xbbbb
*
* where 0xaaaabbbb is EEA + 0x4 shifted right 2
*/
l.addi r6,r2,0x4 // this is 0xaaaabbbb
// l.movhi r9,0xaaaa
l.ori r5,r0,0x1920 // 0x1920 == l.movhi r9
l.sh (TRAMP_SLOT_0+0x0)(r3),r5
l.srli r5,r6,16
l.sh (TRAMP_SLOT_0+0x2)(r3),r5
// l.ori r9,0xbbbb
l.ori r5,r0,0xa929 // 0xa929 == l.ori r9
l.sh (TRAMP_SLOT_1+0x0)(r3),r5
l.andi r5,r6,0xffff
l.sh (TRAMP_SLOT_1+0x2)(r3),r5
/* falthrough, need to set up new jump offset */
0: // l.j
l.slli r6,r4,6 // original offset shifted left 6 - 2
// l.srli r6,r6,6 // original offset shifted right 2
l.slli r4,r2,4 // old jump position: EEA shifted left 4
// l.srli r4,r4,6 // old jump position: shifted right 2
l.addi r5,r3,0xc // new jump position (physical)
l.slli r5,r5,4 // new jump position: shifted left 4
// calculate new jump offset
// new_off = old_off + (old_jump - new_jump)
l.sub r5,r4,r5 // old_jump - new_jump
l.add r5,r6,r5 // orig_off + (old_jump - new_jump)
l.srli r5,r5,6 // new offset shifted right 2
// r5 is new jump offset
// l.j has opcode 0x0...
l.sw TRAMP_SLOT_2(r3),r5 // write it back
l.j trampoline_out
l.nop
/* ----------------------------- */
3: // l.jalr
/* 19 20 aa aa l.movhi r9,0xaaaa
* a9 29 bb bb l.ori r9,0xbbbb
*
* where 0xaaaabbbb is EEA + 0x4 shifted right 2
*/
l.addi r6,r2,0x4 // this is 0xaaaabbbb
// l.movhi r9,0xaaaa
l.ori r5,r0,0x1920 // 0x1920 == l.movhi r9
l.sh (TRAMP_SLOT_0+0x0)(r3),r5
l.srli r5,r6,16
l.sh (TRAMP_SLOT_0+0x2)(r3),r5
// l.ori r9,0xbbbb
l.ori r5,r0,0xa929 // 0xa929 == l.ori r9
l.sh (TRAMP_SLOT_1+0x0)(r3),r5
l.andi r5,r6,0xffff
l.sh (TRAMP_SLOT_1+0x2)(r3),r5
l.lhz r5,(TRAMP_SLOT_2+0x0)(r3) // load hi part of jump instruction
l.andi r5,r5,0x3ff // clear out opcode part
l.ori r5,r5,0x4400 // opcode changed from l.jalr -> l.jr
l.sh (TRAMP_SLOT_2+0x0)(r3),r5 // write it back
/* falthrough */
1: // l.jr
l.j trampoline_out
l.nop
/* ----------------------------- */
4: // l.bnf
5: // l.bf
l.slli r6,r4,6 // original offset shifted left 6 - 2
// l.srli r6,r6,6 // original offset shifted right 2
l.slli r4,r2,4 // old jump position: EEA shifted left 4
// l.srli r4,r4,6 // old jump position: shifted right 2
l.addi r5,r3,0xc // new jump position (physical)
l.slli r5,r5,4 // new jump position: shifted left 4
// calculate new jump offset
// new_off = old_off + (old_jump - new_jump)
l.add r6,r6,r4 // (orig_off + old_jump)
l.sub r6,r6,r5 // (orig_off + old_jump) - new_jump
l.srli r6,r6,6 // new offset shifted right 2
// r6 is new jump offset
l.lwz r4,(TRAMP_SLOT_2+0x0)(r3) // load jump instruction
l.srli r4,r4,16
l.andi r4,r4,0xfc00 // get opcode part
l.slli r4,r4,16
l.or r6,r4,r6 // l.b(n)f new offset
l.sw TRAMP_SLOT_2(r3),r6 // write it back
/* we need to add l.j to EEA + 0x8 */
tophys (r4,r2) // may not be needed (due to shifts down_
l.addi r4,r4,(0x8 - 0x8) // jump target = r2 + 0x8 (compensate for 0x8)
// jump position = r5 + 0x8 (0x8 compensated)
l.sub r4,r4,r5 // jump offset = target - new_position + 0x8
l.slli r4,r4,4 // the amount of info in imediate of jump
l.srli r4,r4,6 // jump instruction with offset
l.sw TRAMP_SLOT_4(r3),r4 // write it to 4th slot
/* fallthrough */
trampoline_out:
// set up new EPC to point to our trampoline code
LOAD_SYMBOL_2_GPR(r5,_immu_trampoline)
l.mtspr r0,r5,SPR_EPCR_BASE
// immu_trampoline is (4x) CACHE_LINE aligned
// and only 6 instructions long,
// so we need to invalidate only 2 lines
/* Establish cache block size
If BS=0, 16;
If BS=1, 32;
r14 contain block size
*/
l.mfspr r21,r0,SPR_ICCFGR
l.andi r21,r21,SPR_ICCFGR_CBS
l.srli r21,r21,7
l.ori r23,r0,16
l.sll r14,r23,r21
l.mtspr r0,r5,SPR_ICBIR
l.add r5,r5,r14
l.mtspr r0,r5,SPR_ICBIR
l.jr r9
l.nop
/*
* DSCR: prints a string referenced by r3.
*
* PRMS: r3 - address of the first character of null
* terminated string to be printed
*
* PREQ: UART at UART_BASE_ADD has to be initialized
*
* POST: caller should be aware that r3, r9 are changed
*/
ENTRY(_emergency_print)
EMERGENCY_PRINT_STORE_GPR4
EMERGENCY_PRINT_STORE_GPR5
EMERGENCY_PRINT_STORE_GPR6
EMERGENCY_PRINT_STORE_GPR7
2:
l.lbz r7,0(r3)
l.sfeq r7,r0
l.bf 9f
l.nop
// putc:
l.movhi r4,hi(UART_BASE_ADD)
l.addi r6,r0,0x20
1: l.lbz r5,5(r4)
l.andi r5,r5,0x20
l.sfeq r5,r6
l.bnf 1b
l.nop
l.sb 0(r4),r7
l.addi r6,r0,0x60
1: l.lbz r5,5(r4)
l.andi r5,r5,0x60
l.sfeq r5,r6
l.bnf 1b
l.nop
/* next character */
l.j 2b
l.addi r3,r3,0x1
9:
EMERGENCY_PRINT_LOAD_GPR7
EMERGENCY_PRINT_LOAD_GPR6
EMERGENCY_PRINT_LOAD_GPR5
EMERGENCY_PRINT_LOAD_GPR4
l.jr r9
l.nop
ENTRY(_emergency_print_nr)
EMERGENCY_PRINT_STORE_GPR4
EMERGENCY_PRINT_STORE_GPR5
EMERGENCY_PRINT_STORE_GPR6
EMERGENCY_PRINT_STORE_GPR7
EMERGENCY_PRINT_STORE_GPR8
l.addi r8,r0,32 // shift register
1: /* remove leading zeros */
l.addi r8,r8,-0x4
l.srl r7,r3,r8
l.andi r7,r7,0xf
/* don't skip the last zero if number == 0x0 */
l.sfeqi r8,0x4
l.bf 2f
l.nop
l.sfeq r7,r0
l.bf 1b
l.nop
2:
l.srl r7,r3,r8
l.andi r7,r7,0xf
l.sflts r8,r0
l.bf 9f
l.sfgtui r7,0x9
l.bnf 8f
l.nop
l.addi r7,r7,0x27
8:
l.addi r7,r7,0x30
// putc:
l.movhi r4,hi(UART_BASE_ADD)
l.addi r6,r0,0x20
1: l.lbz r5,5(r4)
l.andi r5,r5,0x20
l.sfeq r5,r6
l.bnf 1b
l.nop
l.sb 0(r4),r7
l.addi r6,r0,0x60
1: l.lbz r5,5(r4)
l.andi r5,r5,0x60
l.sfeq r5,r6
l.bnf 1b
l.nop
/* next character */
l.j 2b
l.addi r8,r8,-0x4
9:
EMERGENCY_PRINT_LOAD_GPR8
EMERGENCY_PRINT_LOAD_GPR7
EMERGENCY_PRINT_LOAD_GPR6
EMERGENCY_PRINT_LOAD_GPR5
EMERGENCY_PRINT_LOAD_GPR4
l.jr r9
l.nop
/*
* This should be used for debugging only.
* It messes up the Linux early serial output
* somehow, so use it sparingly and essentially
* only if you need to debug something that goes wrong
* before Linux gets the early serial going.
*
* Furthermore, you'll have to make sure you set the
* UART_DEVISOR correctly according to the system
* clock rate.
*
*
*/
#define SYS_CLK 20000000
//#define SYS_CLK 1843200
#define OR32_CONSOLE_BAUD 115200
#define UART_DIVISOR SYS_CLK/(16*OR32_CONSOLE_BAUD)
ENTRY(_early_uart_init)
l.movhi r3,hi(UART_BASE_ADD)
l.addi r4,r0,0x7
l.sb 0x2(r3),r4
l.addi r4,r0,0x0
l.sb 0x1(r3),r4
l.addi r4,r0,0x3
l.sb 0x3(r3),r4
l.lbz r5,3(r3)
l.ori r4,r5,0x80
l.sb 0x3(r3),r4
l.addi r4,r0,((UART_DIVISOR>>8) & 0x000000ff)
l.sb UART_DLM(r3),r4
l.addi r4,r0,((UART_DIVISOR) & 0x000000ff)
l.sb UART_DLL(r3),r4
l.sb 0x3(r3),r5
l.jr r9
l.nop
.section .rodata
_string_unhandled_exception:
.string "\n\rRunarunaround: Unhandled exception 0x\0"
_string_epc_prefix:
.string ": EPC=0x\0"
_string_nl:
.string "\n\r\0"
/* ========================================[ page aligned structures ]=== */
/*
* .data section should be page aligned
* (look into arch/or32/kernel/vmlinux.lds)
*/
.section .data,"aw"
.align 8192
.global empty_zero_page
empty_zero_page:
.space 8192
.global swapper_pg_dir
swapper_pg_dir:
.space 8192
.global _unhandled_stack
_unhandled_stack:
.space 8192
_unhandled_stack_top:
/* ============================================================[ EOF ]=== */
Reference in New Issue View Git Blame Copy Permalink