OpenCloudOS-Kernel/fs/ntfs3/lib/decompress_common.c

320 lines
12 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* decompress_common.c - Code shared by the XPRESS and LZX decompressors
*
* Copyright (C) 2015 Eric Biggers
*/
#include "decompress_common.h"
/*
* make_huffman_decode_table() -
*
* Build a decoding table for a canonical prefix code, or "Huffman code".
*
* This is an internal function, not part of the library API!
*
* This takes as input the length of the codeword for each symbol in the
* alphabet and produces as output a table that can be used for fast
* decoding of prefix-encoded symbols using read_huffsym().
*
* Strictly speaking, a canonical prefix code might not be a Huffman
* code. But this algorithm will work either way; and in fact, since
* Huffman codes are defined in terms of symbol frequencies, there is no
* way for the decompressor to know whether the code is a true Huffman
* code or not until all symbols have been decoded.
*
* Because the prefix code is assumed to be "canonical", it can be
* reconstructed directly from the codeword lengths. A prefix code is
* canonical if and only if a longer codeword never lexicographically
* precedes a shorter codeword, and the lexicographic ordering of
* codewords of the same length is the same as the lexicographic ordering
* of the corresponding symbols. Consequently, we can sort the symbols
* primarily by codeword length and secondarily by symbol value, then
* reconstruct the prefix code by generating codewords lexicographically
* in that order.
*
* This function does not, however, generate the prefix code explicitly.
* Instead, it directly builds a table for decoding symbols using the
* code. The basic idea is this: given the next 'max_codeword_len' bits
* in the input, we can look up the decoded symbol by indexing a table
* containing 2**max_codeword_len entries. A codeword with length
* 'max_codeword_len' will have exactly one entry in this table, whereas
* a codeword shorter than 'max_codeword_len' will have multiple entries
* in this table. Precisely, a codeword of length n will be represented
* by 2**(max_codeword_len - n) entries in this table. The 0-based index
* of each such entry will contain the corresponding codeword as a prefix
* when zero-padded on the left to 'max_codeword_len' binary digits.
*
* That's the basic idea, but we implement two optimizations regarding
* the format of the decode table itself:
*
* - For many compression formats, the maximum codeword length is too
* long for it to be efficient to build the full decoding table
* whenever a new prefix code is used. Instead, we can build the table
* using only 2**table_bits entries, where 'table_bits' is some number
* less than or equal to 'max_codeword_len'. Then, only codewords of
* length 'table_bits' and shorter can be directly looked up. For
* longer codewords, the direct lookup instead produces the root of a
* binary tree. Using this tree, the decoder can do traditional
* bit-by-bit decoding of the remainder of the codeword. Child nodes
* are allocated in extra entries at the end of the table; leaf nodes
* contain symbols. Note that the long-codeword case is, in general,
* not performance critical, since in Huffman codes the most frequently
* used symbols are assigned the shortest codeword lengths.
*
* - When we decode a symbol using a direct lookup of the table, we still
* need to know its length so that the bitstream can be advanced by the
* appropriate number of bits. The simple solution is to simply retain
* the 'lens' array and use the decoded symbol as an index into it.
* However, this requires two separate array accesses in the fast path.
* The optimization is to store the length directly in the decode
* table. We use the bottom 11 bits for the symbol and the top 5 bits
* for the length. In addition, to combine this optimization with the
* previous one, we introduce a special case where the top 2 bits of
* the length are both set if the entry is actually the root of a
* binary tree.
*
* @decode_table:
* The array in which to create the decoding table. This must have
* a length of at least ((2**table_bits) + 2 * num_syms) entries.
*
* @num_syms:
* The number of symbols in the alphabet; also, the length of the
* 'lens' array. Must be less than or equal to 2048.
*
* @table_bits:
* The order of the decode table size, as explained above. Must be
* less than or equal to 13.
*
* @lens:
* An array of length @num_syms, indexable by symbol, that gives the
* length of the codeword, in bits, for that symbol. The length can
* be 0, which means that the symbol does not have a codeword
* assigned.
*
* @max_codeword_len:
* The longest codeword length allowed in the compression format.
* All entries in 'lens' must be less than or equal to this value.
* This must be less than or equal to 23.
*
* @working_space
* A temporary array of length '2 * (max_codeword_len + 1) +
* num_syms'.
*
* Returns 0 on success, or -1 if the lengths do not form a valid prefix
* code.
*/
int make_huffman_decode_table(u16 decode_table[], const u32 num_syms,
const u32 table_bits, const u8 lens[],
const u32 max_codeword_len,
u16 working_space[])
{
const u32 table_num_entries = 1 << table_bits;
u16 * const len_counts = &working_space[0];
u16 * const offsets = &working_space[1 * (max_codeword_len + 1)];
u16 * const sorted_syms = &working_space[2 * (max_codeword_len + 1)];
int left;
void *decode_table_ptr;
u32 sym_idx;
u32 codeword_len;
u32 stores_per_loop;
u32 decode_table_pos;
u32 len;
u32 sym;
/* Count how many symbols have each possible codeword length.
* Note that a length of 0 indicates the corresponding symbol is not
* used in the code and therefore does not have a codeword.
*/
for (len = 0; len <= max_codeword_len; len++)
len_counts[len] = 0;
for (sym = 0; sym < num_syms; sym++)
len_counts[lens[sym]]++;
/* We can assume all lengths are <= max_codeword_len, but we
* cannot assume they form a valid prefix code. A codeword of
* length n should require a proportion of the codespace equaling
* (1/2)^n. The code is valid if and only if the codespace is
* exactly filled by the lengths, by this measure.
*/
left = 1;
for (len = 1; len <= max_codeword_len; len++) {
left <<= 1;
left -= len_counts[len];
if (left < 0) {
/* The lengths overflow the codespace; that is, the code
* is over-subscribed.
*/
return -1;
}
}
if (left) {
/* The lengths do not fill the codespace; that is, they form an
* incomplete set.
*/
if (left == (1 << max_codeword_len)) {
/* The code is completely empty. This is arguably
* invalid, but in fact it is valid in LZX and XPRESS,
* so we must allow it. By definition, no symbols can
* be decoded with an empty code. Consequently, we
* technically don't even need to fill in the decode
* table. However, to avoid accessing uninitialized
* memory if the algorithm nevertheless attempts to
* decode symbols using such a code, we zero out the
* decode table.
*/
memset(decode_table, 0,
table_num_entries * sizeof(decode_table[0]));
return 0;
}
return -1;
}
/* Sort the symbols primarily by length and secondarily by symbol order.
*/
/* Initialize 'offsets' so that offsets[len] for 1 <= len <=
* max_codeword_len is the number of codewords shorter than 'len' bits.
*/
offsets[1] = 0;
for (len = 1; len < max_codeword_len; len++)
offsets[len + 1] = offsets[len] + len_counts[len];
/* Use the 'offsets' array to sort the symbols. Note that we do not
* include symbols that are not used in the code. Consequently, fewer
* than 'num_syms' entries in 'sorted_syms' may be filled.
*/
for (sym = 0; sym < num_syms; sym++)
if (lens[sym])
sorted_syms[offsets[lens[sym]]++] = sym;
/* Fill entries for codewords with length <= table_bits
* --- that is, those short enough for a direct mapping.
*
* The table will start with entries for the shortest codeword(s), which
* have the most entries. From there, the number of entries per
* codeword will decrease.
*/
decode_table_ptr = decode_table;
sym_idx = 0;
codeword_len = 1;
stores_per_loop = (1 << (table_bits - codeword_len));
for (; stores_per_loop != 0; codeword_len++, stores_per_loop >>= 1) {
u32 end_sym_idx = sym_idx + len_counts[codeword_len];
for (; sym_idx < end_sym_idx; sym_idx++) {
u16 entry;
u16 *p;
u32 n;
entry = ((u32)codeword_len << 11) | sorted_syms[sym_idx];
p = (u16 *)decode_table_ptr;
n = stores_per_loop;
do {
*p++ = entry;
} while (--n);
decode_table_ptr = p;
}
}
/* If we've filled in the entire table, we are done. Otherwise,
* there are codewords longer than table_bits for which we must
* generate binary trees.
*/
decode_table_pos = (u16 *)decode_table_ptr - decode_table;
if (decode_table_pos != table_num_entries) {
u32 j;
u32 next_free_tree_slot;
u32 cur_codeword;
/* First, zero out the remaining entries. This is
* necessary so that these entries appear as
* "unallocated" in the next part. Each of these entries
* will eventually be filled with the representation of
* the root node of a binary tree.
*/
j = decode_table_pos;
do {
decode_table[j] = 0;
} while (++j != table_num_entries);
/* We allocate child nodes starting at the end of the
* direct lookup table. Note that there should be
* 2*num_syms extra entries for this purpose, although
* fewer than this may actually be needed.
*/
next_free_tree_slot = table_num_entries;
/* Iterate through each codeword with length greater than
* 'table_bits', primarily in order of codeword length
* and secondarily in order of symbol.
*/
for (cur_codeword = decode_table_pos << 1;
codeword_len <= max_codeword_len;
codeword_len++, cur_codeword <<= 1) {
u32 end_sym_idx = sym_idx + len_counts[codeword_len];
for (; sym_idx < end_sym_idx; sym_idx++, cur_codeword++) {
/* 'sorted_sym' is the symbol represented by the
* codeword.
*/
u32 sorted_sym = sorted_syms[sym_idx];
u32 extra_bits = codeword_len - table_bits;
u32 node_idx = cur_codeword >> extra_bits;
/* Go through each bit of the current codeword
* beyond the prefix of length @table_bits and
* walk the appropriate binary tree, allocating
* any slots that have not yet been allocated.
*
* Note that the 'pointer' entry to the binary
* tree, which is stored in the direct lookup
* portion of the table, is represented
* identically to other internal (non-leaf)
* nodes of the binary tree; it can be thought
* of as simply the root of the tree. The
* representation of these internal nodes is
* simply the index of the left child combined
* with the special bits 0xC000 to distinguish
* the entry from direct mapping and leaf node
* entries.
*/
do {
/* At least one bit remains in the
* codeword, but the current node is an
* unallocated leaf. Change it to an
* internal node.
*/
if (decode_table[node_idx] == 0) {
decode_table[node_idx] =
next_free_tree_slot | 0xC000;
decode_table[next_free_tree_slot++] = 0;
decode_table[next_free_tree_slot++] = 0;
}
/* Go to the left child if the next bit
* in the codeword is 0; otherwise go to
* the right child.
*/
node_idx = decode_table[node_idx] & 0x3FFF;
--extra_bits;
node_idx += (cur_codeword >> extra_bits) & 1;
} while (extra_bits != 0);
/* We've traversed the tree using the entire
* codeword, and we're now at the entry where
* the actual symbol will be stored. This is
* distinguished from internal nodes by not
* having its high two bits set.
*/
decode_table[node_idx] = sorted_sym;
}
}
}
return 0;
}