245 lines
6.0 KiB
C
245 lines
6.0 KiB
C
/*
|
|
* Backlight control code for Sharp Zaurus SL-5500
|
|
*
|
|
* Copyright 2005 John Lenz <lenz@cs.wisc.edu>
|
|
* Maintainer: Pavel Machek <pavel@suse.cz> (unless John wants to :-)
|
|
* GPL v2
|
|
*
|
|
* This driver assumes single CPU. That's okay, because collie is
|
|
* slightly old hardware, and noone is going to retrofit second CPU to
|
|
* old PDA.
|
|
*/
|
|
|
|
/* LCD power functions */
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/backlight.h>
|
|
|
|
#include <asm/hardware/locomo.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/mach/sharpsl_param.h>
|
|
#include <asm/mach-types.h>
|
|
|
|
#include "../../../arch/arm/mach-sa1100/generic.h"
|
|
|
|
static struct backlight_device *locomolcd_bl_device;
|
|
static struct locomo_dev *locomolcd_dev;
|
|
static unsigned long locomolcd_flags;
|
|
#define LOCOMOLCD_SUSPENDED 0x01
|
|
|
|
static void locomolcd_on(int comadj)
|
|
{
|
|
locomo_gpio_set_dir(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHA_ON, 0);
|
|
locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHA_ON, 1);
|
|
mdelay(2);
|
|
|
|
locomo_gpio_set_dir(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHD_ON, 0);
|
|
locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHD_ON, 1);
|
|
mdelay(2);
|
|
|
|
locomo_m62332_senddata(locomolcd_dev, comadj, 0);
|
|
mdelay(5);
|
|
|
|
locomo_gpio_set_dir(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VEE_ON, 0);
|
|
locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VEE_ON, 1);
|
|
mdelay(10);
|
|
|
|
/* TFTCRST | CPSOUT=0 | CPSEN */
|
|
locomo_writel(0x01, locomolcd_dev->mapbase + LOCOMO_TC);
|
|
|
|
/* Set CPSD */
|
|
locomo_writel(6, locomolcd_dev->mapbase + LOCOMO_CPSD);
|
|
|
|
/* TFTCRST | CPSOUT=0 | CPSEN */
|
|
locomo_writel((0x04 | 0x01), locomolcd_dev->mapbase + LOCOMO_TC);
|
|
mdelay(10);
|
|
|
|
locomo_gpio_set_dir(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_MOD, 0);
|
|
locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_MOD, 1);
|
|
}
|
|
|
|
static void locomolcd_off(int comadj)
|
|
{
|
|
/* TFTCRST=1 | CPSOUT=1 | CPSEN = 0 */
|
|
locomo_writel(0x06, locomolcd_dev->mapbase + LOCOMO_TC);
|
|
mdelay(1);
|
|
|
|
locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHA_ON, 0);
|
|
mdelay(110);
|
|
|
|
locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VEE_ON, 0);
|
|
mdelay(700);
|
|
|
|
/* TFTCRST=0 | CPSOUT=0 | CPSEN = 0 */
|
|
locomo_writel(0, locomolcd_dev->mapbase + LOCOMO_TC);
|
|
locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_MOD, 0);
|
|
locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHD_ON, 0);
|
|
}
|
|
|
|
void locomolcd_power(int on)
|
|
{
|
|
int comadj = sharpsl_param.comadj;
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
|
|
if (!locomolcd_dev) {
|
|
local_irq_restore(flags);
|
|
return;
|
|
}
|
|
|
|
/* read comadj */
|
|
if (comadj == -1 && machine_is_collie())
|
|
comadj = 128;
|
|
if (comadj == -1 && machine_is_poodle())
|
|
comadj = 118;
|
|
|
|
if (on)
|
|
locomolcd_on(comadj);
|
|
else
|
|
locomolcd_off(comadj);
|
|
|
|
local_irq_restore(flags);
|
|
}
|
|
EXPORT_SYMBOL(locomolcd_power);
|
|
|
|
|
|
static int current_intensity;
|
|
|
|
static int locomolcd_set_intensity(struct backlight_device *bd)
|
|
{
|
|
int intensity = bd->props->brightness;
|
|
|
|
if (bd->props->power != FB_BLANK_UNBLANK)
|
|
intensity = 0;
|
|
if (bd->props->fb_blank != FB_BLANK_UNBLANK)
|
|
intensity = 0;
|
|
if (locomolcd_flags & LOCOMOLCD_SUSPENDED)
|
|
intensity = 0;
|
|
|
|
switch (intensity) {
|
|
/* AC and non-AC are handled differently, but produce same results in sharp code? */
|
|
case 0: locomo_frontlight_set(locomolcd_dev, 0, 0, 161); break;
|
|
case 1: locomo_frontlight_set(locomolcd_dev, 117, 0, 161); break;
|
|
case 2: locomo_frontlight_set(locomolcd_dev, 163, 0, 148); break;
|
|
case 3: locomo_frontlight_set(locomolcd_dev, 194, 0, 161); break;
|
|
case 4: locomo_frontlight_set(locomolcd_dev, 194, 1, 161); break;
|
|
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
current_intensity = intensity;
|
|
return 0;
|
|
}
|
|
|
|
static int locomolcd_get_intensity(struct backlight_device *bd)
|
|
{
|
|
return current_intensity;
|
|
}
|
|
|
|
static struct backlight_properties locomobl_data = {
|
|
.owner = THIS_MODULE,
|
|
.get_brightness = locomolcd_get_intensity,
|
|
.update_status = locomolcd_set_intensity,
|
|
.max_brightness = 4,
|
|
};
|
|
|
|
#ifdef CONFIG_PM
|
|
static int locomolcd_suspend(struct locomo_dev *dev, pm_message_t state)
|
|
{
|
|
locomolcd_flags |= LOCOMOLCD_SUSPENDED;
|
|
locomolcd_set_intensity(locomolcd_bl_device);
|
|
return 0;
|
|
}
|
|
|
|
static int locomolcd_resume(struct locomo_dev *dev)
|
|
{
|
|
locomolcd_flags &= ~LOCOMOLCD_SUSPENDED;
|
|
locomolcd_set_intensity(locomolcd_bl_device);
|
|
return 0;
|
|
}
|
|
#else
|
|
#define locomolcd_suspend NULL
|
|
#define locomolcd_resume NULL
|
|
#endif
|
|
|
|
static int locomolcd_probe(struct locomo_dev *ldev)
|
|
{
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
locomolcd_dev = ldev;
|
|
|
|
locomo_gpio_set_dir(ldev->dev.parent, LOCOMO_GPIO_FL_VR, 0);
|
|
|
|
/* the poodle_lcd_power function is called for the first time
|
|
* from fs_initcall, which is before locomo is activated.
|
|
* We need to recall poodle_lcd_power here*/
|
|
if (machine_is_poodle())
|
|
locomolcd_power(1);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
locomolcd_bl_device = backlight_device_register("locomo-bl", NULL, &locomobl_data);
|
|
|
|
if (IS_ERR (locomolcd_bl_device))
|
|
return PTR_ERR (locomolcd_bl_device);
|
|
|
|
/* Set up frontlight so that screen is readable */
|
|
locomobl_data.brightness = 2;
|
|
locomolcd_set_intensity(locomolcd_bl_device);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int locomolcd_remove(struct locomo_dev *dev)
|
|
{
|
|
unsigned long flags;
|
|
|
|
backlight_device_unregister(locomolcd_bl_device);
|
|
local_irq_save(flags);
|
|
locomolcd_dev = NULL;
|
|
local_irq_restore(flags);
|
|
return 0;
|
|
}
|
|
|
|
static struct locomo_driver poodle_lcd_driver = {
|
|
.drv = {
|
|
.name = "locomo-backlight",
|
|
},
|
|
.devid = LOCOMO_DEVID_BACKLIGHT,
|
|
.probe = locomolcd_probe,
|
|
.remove = locomolcd_remove,
|
|
.suspend = locomolcd_suspend,
|
|
.resume = locomolcd_resume,
|
|
};
|
|
|
|
|
|
static int __init locomolcd_init(void)
|
|
{
|
|
int ret = locomo_driver_register(&poodle_lcd_driver);
|
|
if (ret)
|
|
return ret;
|
|
|
|
#ifdef CONFIG_SA1100_COLLIE
|
|
sa1100fb_lcd_power = locomolcd_power;
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static void __exit locomolcd_exit(void)
|
|
{
|
|
locomo_driver_unregister(&poodle_lcd_driver);
|
|
}
|
|
|
|
module_init(locomolcd_init);
|
|
module_exit(locomolcd_exit);
|
|
|
|
MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>, Pavel Machek <pavel@suse.cz>");
|
|
MODULE_DESCRIPTION("Collie LCD driver");
|
|
MODULE_LICENSE("GPL");
|