1327 lines
31 KiB
C
1327 lines
31 KiB
C
/*
|
|
* GPIO Abstraction Layer
|
|
*
|
|
* Copyright 2006-2010 Analog Devices Inc.
|
|
*
|
|
* Licensed under the GPL-2 or later
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/err.h>
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/seq_file.h>
|
|
#include <asm/blackfin.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/portmux.h>
|
|
#include <linux/irq.h>
|
|
#include <asm/irq_handler.h>
|
|
|
|
#if ANOMALY_05000311 || ANOMALY_05000323
|
|
enum {
|
|
AWA_data = SYSCR,
|
|
AWA_data_clear = SYSCR,
|
|
AWA_data_set = SYSCR,
|
|
AWA_toggle = SYSCR,
|
|
AWA_maska = BFIN_UART_SCR,
|
|
AWA_maska_clear = BFIN_UART_SCR,
|
|
AWA_maska_set = BFIN_UART_SCR,
|
|
AWA_maska_toggle = BFIN_UART_SCR,
|
|
AWA_maskb = BFIN_UART_GCTL,
|
|
AWA_maskb_clear = BFIN_UART_GCTL,
|
|
AWA_maskb_set = BFIN_UART_GCTL,
|
|
AWA_maskb_toggle = BFIN_UART_GCTL,
|
|
AWA_dir = SPORT1_STAT,
|
|
AWA_polar = SPORT1_STAT,
|
|
AWA_edge = SPORT1_STAT,
|
|
AWA_both = SPORT1_STAT,
|
|
#if ANOMALY_05000311
|
|
AWA_inen = TIMER_ENABLE,
|
|
#elif ANOMALY_05000323
|
|
AWA_inen = DMA1_1_CONFIG,
|
|
#endif
|
|
};
|
|
/* Anomaly Workaround */
|
|
#define AWA_DUMMY_READ(name) bfin_read16(AWA_ ## name)
|
|
#else
|
|
#define AWA_DUMMY_READ(...) do { } while (0)
|
|
#endif
|
|
|
|
static struct gpio_port_t * const gpio_array[] = {
|
|
#if defined(BF533_FAMILY) || defined(BF538_FAMILY)
|
|
(struct gpio_port_t *) FIO_FLAG_D,
|
|
#elif defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
|
|
(struct gpio_port_t *) PORTFIO,
|
|
(struct gpio_port_t *) PORTGIO,
|
|
(struct gpio_port_t *) PORTHIO,
|
|
#elif defined(BF561_FAMILY)
|
|
(struct gpio_port_t *) FIO0_FLAG_D,
|
|
(struct gpio_port_t *) FIO1_FLAG_D,
|
|
(struct gpio_port_t *) FIO2_FLAG_D,
|
|
#elif defined(CONFIG_BF54x)
|
|
(struct gpio_port_t *)PORTA_FER,
|
|
(struct gpio_port_t *)PORTB_FER,
|
|
(struct gpio_port_t *)PORTC_FER,
|
|
(struct gpio_port_t *)PORTD_FER,
|
|
(struct gpio_port_t *)PORTE_FER,
|
|
(struct gpio_port_t *)PORTF_FER,
|
|
(struct gpio_port_t *)PORTG_FER,
|
|
(struct gpio_port_t *)PORTH_FER,
|
|
(struct gpio_port_t *)PORTI_FER,
|
|
(struct gpio_port_t *)PORTJ_FER,
|
|
#else
|
|
# error no gpio arrays defined
|
|
#endif
|
|
};
|
|
|
|
#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
|
|
static unsigned short * const port_fer[] = {
|
|
(unsigned short *) PORTF_FER,
|
|
(unsigned short *) PORTG_FER,
|
|
(unsigned short *) PORTH_FER,
|
|
};
|
|
|
|
# if !defined(BF537_FAMILY)
|
|
static unsigned short * const port_mux[] = {
|
|
(unsigned short *) PORTF_MUX,
|
|
(unsigned short *) PORTG_MUX,
|
|
(unsigned short *) PORTH_MUX,
|
|
};
|
|
|
|
static const
|
|
u8 pmux_offset[][16] = {
|
|
# if defined(CONFIG_BF52x)
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */
|
|
{ 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */
|
|
# elif defined(CONFIG_BF51x)
|
|
{ 0, 2, 2, 2, 2, 2, 2, 4, 6, 6, 6, 8, 8, 8, 8, 10 }, /* PORTF */
|
|
{ 0, 0, 0, 2, 4, 6, 6, 6, 8, 10, 10, 12, 14, 14, 14, 14 }, /* PORTG */
|
|
{ 0, 0, 0, 0, 2, 2, 4, 6, 10, 10, 10, 10, 10, 10, 10, 10 }, /* PORTH */
|
|
# endif
|
|
};
|
|
# endif
|
|
|
|
#elif defined(BF538_FAMILY)
|
|
static unsigned short * const port_fer[] = {
|
|
(unsigned short *) PORTCIO_FER,
|
|
(unsigned short *) PORTDIO_FER,
|
|
(unsigned short *) PORTEIO_FER,
|
|
};
|
|
#endif
|
|
|
|
#define RESOURCE_LABEL_SIZE 16
|
|
|
|
static struct str_ident {
|
|
char name[RESOURCE_LABEL_SIZE];
|
|
} str_ident[MAX_RESOURCES];
|
|
|
|
#if defined(CONFIG_PM)
|
|
static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM];
|
|
# ifdef BF538_FAMILY
|
|
static unsigned short port_fer_saved[3];
|
|
# endif
|
|
#endif
|
|
|
|
static void gpio_error(unsigned gpio)
|
|
{
|
|
printk(KERN_ERR "bfin-gpio: GPIO %d wasn't requested!\n", gpio);
|
|
}
|
|
|
|
static void set_label(unsigned short ident, const char *label)
|
|
{
|
|
if (label) {
|
|
strncpy(str_ident[ident].name, label,
|
|
RESOURCE_LABEL_SIZE);
|
|
str_ident[ident].name[RESOURCE_LABEL_SIZE - 1] = 0;
|
|
}
|
|
}
|
|
|
|
static char *get_label(unsigned short ident)
|
|
{
|
|
return (*str_ident[ident].name ? str_ident[ident].name : "UNKNOWN");
|
|
}
|
|
|
|
static int cmp_label(unsigned short ident, const char *label)
|
|
{
|
|
if (label == NULL) {
|
|
dump_stack();
|
|
printk(KERN_ERR "Please provide none-null label\n");
|
|
}
|
|
|
|
if (label)
|
|
return strcmp(str_ident[ident].name, label);
|
|
else
|
|
return -EINVAL;
|
|
}
|
|
|
|
#define map_entry(m, i) reserved_##m##_map[gpio_bank(i)]
|
|
#define is_reserved(m, i, e) (map_entry(m, i) & gpio_bit(i))
|
|
#define reserve(m, i) (map_entry(m, i) |= gpio_bit(i))
|
|
#define unreserve(m, i) (map_entry(m, i) &= ~gpio_bit(i))
|
|
#define DECLARE_RESERVED_MAP(m, c) static unsigned short reserved_##m##_map[c]
|
|
|
|
DECLARE_RESERVED_MAP(gpio, GPIO_BANK_NUM);
|
|
DECLARE_RESERVED_MAP(peri, DIV_ROUND_UP(MAX_RESOURCES, GPIO_BANKSIZE));
|
|
DECLARE_RESERVED_MAP(gpio_irq, GPIO_BANK_NUM);
|
|
|
|
inline int check_gpio(unsigned gpio)
|
|
{
|
|
#if defined(CONFIG_BF54x)
|
|
if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15
|
|
|| gpio == GPIO_PH14 || gpio == GPIO_PH15
|
|
|| gpio == GPIO_PJ14 || gpio == GPIO_PJ15)
|
|
return -EINVAL;
|
|
#endif
|
|
if (gpio >= MAX_BLACKFIN_GPIOS)
|
|
return -EINVAL;
|
|
return 0;
|
|
}
|
|
|
|
static void port_setup(unsigned gpio, unsigned short usage)
|
|
{
|
|
#if defined(BF538_FAMILY)
|
|
/*
|
|
* BF538/9 Port C,D and E are special.
|
|
* Inverted PORT_FER polarity on CDE and no PORF_FER on F
|
|
* Regular PORT F GPIOs are handled here, CDE are exclusively
|
|
* managed by GPIOLIB
|
|
*/
|
|
|
|
if (gpio < MAX_BLACKFIN_GPIOS || gpio >= MAX_RESOURCES)
|
|
return;
|
|
|
|
gpio -= MAX_BLACKFIN_GPIOS;
|
|
|
|
if (usage == GPIO_USAGE)
|
|
*port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
|
|
else
|
|
*port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
|
|
SSYNC();
|
|
return;
|
|
#endif
|
|
|
|
if (check_gpio(gpio))
|
|
return;
|
|
|
|
#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
|
|
if (usage == GPIO_USAGE)
|
|
*port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
|
|
else
|
|
*port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
|
|
SSYNC();
|
|
#elif defined(CONFIG_BF54x)
|
|
if (usage == GPIO_USAGE)
|
|
gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio);
|
|
else
|
|
gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio);
|
|
SSYNC();
|
|
#endif
|
|
}
|
|
|
|
#ifdef BF537_FAMILY
|
|
static const s8 port_mux[] = {
|
|
[GPIO_PF0] = 3,
|
|
[GPIO_PF1] = 3,
|
|
[GPIO_PF2] = 4,
|
|
[GPIO_PF3] = 4,
|
|
[GPIO_PF4] = 5,
|
|
[GPIO_PF5] = 6,
|
|
[GPIO_PF6] = 7,
|
|
[GPIO_PF7] = 8,
|
|
[GPIO_PF8 ... GPIO_PF15] = -1,
|
|
[GPIO_PG0 ... GPIO_PG7] = -1,
|
|
[GPIO_PG8] = 9,
|
|
[GPIO_PG9] = 9,
|
|
[GPIO_PG10] = 10,
|
|
[GPIO_PG11] = 10,
|
|
[GPIO_PG12] = 10,
|
|
[GPIO_PG13] = 11,
|
|
[GPIO_PG14] = 11,
|
|
[GPIO_PG15] = 11,
|
|
[GPIO_PH0 ... GPIO_PH15] = -1,
|
|
[PORT_PJ0 ... PORT_PJ3] = -1,
|
|
[PORT_PJ4] = 1,
|
|
[PORT_PJ5] = 1,
|
|
[PORT_PJ6 ... PORT_PJ9] = -1,
|
|
[PORT_PJ10] = 0,
|
|
[PORT_PJ11] = 0,
|
|
};
|
|
|
|
static int portmux_group_check(unsigned short per)
|
|
{
|
|
u16 ident = P_IDENT(per);
|
|
u16 function = P_FUNCT2MUX(per);
|
|
s8 offset = port_mux[ident];
|
|
u16 m, pmux, pfunc;
|
|
|
|
if (offset < 0)
|
|
return 0;
|
|
|
|
pmux = bfin_read_PORT_MUX();
|
|
for (m = 0; m < ARRAY_SIZE(port_mux); ++m) {
|
|
if (m == ident)
|
|
continue;
|
|
if (port_mux[m] != offset)
|
|
continue;
|
|
if (!is_reserved(peri, m, 1))
|
|
continue;
|
|
|
|
if (offset == 1)
|
|
pfunc = (pmux >> offset) & 3;
|
|
else
|
|
pfunc = (pmux >> offset) & 1;
|
|
if (pfunc != function) {
|
|
pr_err("pin group conflict! request pin %d func %d conflict with pin %d func %d\n",
|
|
ident, function, m, pfunc);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void portmux_setup(unsigned short per)
|
|
{
|
|
u16 ident = P_IDENT(per);
|
|
u16 function = P_FUNCT2MUX(per);
|
|
s8 offset = port_mux[ident];
|
|
u16 pmux;
|
|
|
|
if (offset == -1)
|
|
return;
|
|
|
|
pmux = bfin_read_PORT_MUX();
|
|
if (offset != 1)
|
|
pmux &= ~(1 << offset);
|
|
else
|
|
pmux &= ~(3 << 1);
|
|
pmux |= (function << offset);
|
|
bfin_write_PORT_MUX(pmux);
|
|
}
|
|
#elif defined(CONFIG_BF54x)
|
|
inline void portmux_setup(unsigned short per)
|
|
{
|
|
u16 ident = P_IDENT(per);
|
|
u16 function = P_FUNCT2MUX(per);
|
|
u32 pmux;
|
|
|
|
pmux = gpio_array[gpio_bank(ident)]->port_mux;
|
|
|
|
pmux &= ~(0x3 << (2 * gpio_sub_n(ident)));
|
|
pmux |= (function & 0x3) << (2 * gpio_sub_n(ident));
|
|
|
|
gpio_array[gpio_bank(ident)]->port_mux = pmux;
|
|
}
|
|
|
|
inline u16 get_portmux(unsigned short per)
|
|
{
|
|
u16 ident = P_IDENT(per);
|
|
u32 pmux = gpio_array[gpio_bank(ident)]->port_mux;
|
|
return (pmux >> (2 * gpio_sub_n(ident)) & 0x3);
|
|
}
|
|
static int portmux_group_check(unsigned short per)
|
|
{
|
|
return 0;
|
|
}
|
|
#elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
|
|
static int portmux_group_check(unsigned short per)
|
|
{
|
|
u16 ident = P_IDENT(per);
|
|
u16 function = P_FUNCT2MUX(per);
|
|
u8 offset = pmux_offset[gpio_bank(ident)][gpio_sub_n(ident)];
|
|
u16 pin, gpiopin, pfunc;
|
|
|
|
for (pin = 0; pin < GPIO_BANKSIZE; ++pin) {
|
|
if (offset != pmux_offset[gpio_bank(ident)][pin])
|
|
continue;
|
|
|
|
gpiopin = gpio_bank(ident) * GPIO_BANKSIZE + pin;
|
|
if (gpiopin == ident)
|
|
continue;
|
|
if (!is_reserved(peri, gpiopin, 1))
|
|
continue;
|
|
|
|
pfunc = *port_mux[gpio_bank(ident)];
|
|
pfunc = (pfunc >> offset) & 3;
|
|
if (pfunc != function) {
|
|
pr_err("pin group conflict! request pin %d func %d conflict with pin %d func %d\n",
|
|
ident, function, gpiopin, pfunc);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
inline void portmux_setup(unsigned short per)
|
|
{
|
|
u16 ident = P_IDENT(per);
|
|
u16 function = P_FUNCT2MUX(per);
|
|
u8 offset = pmux_offset[gpio_bank(ident)][gpio_sub_n(ident)];
|
|
u16 pmux;
|
|
|
|
pmux = *port_mux[gpio_bank(ident)];
|
|
if (((pmux >> offset) & 3) == function)
|
|
return;
|
|
pmux &= ~(3 << offset);
|
|
pmux |= (function & 3) << offset;
|
|
*port_mux[gpio_bank(ident)] = pmux;
|
|
SSYNC();
|
|
}
|
|
#else
|
|
# define portmux_setup(...) do { } while (0)
|
|
static int portmux_group_check(unsigned short per)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifndef CONFIG_BF54x
|
|
/***********************************************************
|
|
*
|
|
* FUNCTIONS: Blackfin General Purpose Ports Access Functions
|
|
*
|
|
* INPUTS/OUTPUTS:
|
|
* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
|
|
*
|
|
*
|
|
* DESCRIPTION: These functions abstract direct register access
|
|
* to Blackfin processor General Purpose
|
|
* Ports Regsiters
|
|
*
|
|
* CAUTION: These functions do not belong to the GPIO Driver API
|
|
*************************************************************
|
|
* MODIFICATION HISTORY :
|
|
**************************************************************/
|
|
|
|
/* Set a specific bit */
|
|
|
|
#define SET_GPIO(name) \
|
|
void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
|
|
{ \
|
|
unsigned long flags; \
|
|
flags = hard_local_irq_save(); \
|
|
if (arg) \
|
|
gpio_array[gpio_bank(gpio)]->name |= gpio_bit(gpio); \
|
|
else \
|
|
gpio_array[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \
|
|
AWA_DUMMY_READ(name); \
|
|
hard_local_irq_restore(flags); \
|
|
} \
|
|
EXPORT_SYMBOL(set_gpio_ ## name);
|
|
|
|
SET_GPIO(dir) /* set_gpio_dir() */
|
|
SET_GPIO(inen) /* set_gpio_inen() */
|
|
SET_GPIO(polar) /* set_gpio_polar() */
|
|
SET_GPIO(edge) /* set_gpio_edge() */
|
|
SET_GPIO(both) /* set_gpio_both() */
|
|
|
|
|
|
#define SET_GPIO_SC(name) \
|
|
void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
|
|
{ \
|
|
unsigned long flags; \
|
|
if (ANOMALY_05000311 || ANOMALY_05000323) \
|
|
flags = hard_local_irq_save(); \
|
|
if (arg) \
|
|
gpio_array[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
|
|
else \
|
|
gpio_array[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
|
|
if (ANOMALY_05000311 || ANOMALY_05000323) { \
|
|
AWA_DUMMY_READ(name); \
|
|
hard_local_irq_restore(flags); \
|
|
} \
|
|
} \
|
|
EXPORT_SYMBOL(set_gpio_ ## name);
|
|
|
|
SET_GPIO_SC(maska)
|
|
SET_GPIO_SC(maskb)
|
|
SET_GPIO_SC(data)
|
|
|
|
void set_gpio_toggle(unsigned gpio)
|
|
{
|
|
unsigned long flags;
|
|
if (ANOMALY_05000311 || ANOMALY_05000323)
|
|
flags = hard_local_irq_save();
|
|
gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
|
|
if (ANOMALY_05000311 || ANOMALY_05000323) {
|
|
AWA_DUMMY_READ(toggle);
|
|
hard_local_irq_restore(flags);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(set_gpio_toggle);
|
|
|
|
|
|
/*Set current PORT date (16-bit word)*/
|
|
|
|
#define SET_GPIO_P(name) \
|
|
void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \
|
|
{ \
|
|
unsigned long flags; \
|
|
if (ANOMALY_05000311 || ANOMALY_05000323) \
|
|
flags = hard_local_irq_save(); \
|
|
gpio_array[gpio_bank(gpio)]->name = arg; \
|
|
if (ANOMALY_05000311 || ANOMALY_05000323) { \
|
|
AWA_DUMMY_READ(name); \
|
|
hard_local_irq_restore(flags); \
|
|
} \
|
|
} \
|
|
EXPORT_SYMBOL(set_gpiop_ ## name);
|
|
|
|
SET_GPIO_P(data)
|
|
SET_GPIO_P(dir)
|
|
SET_GPIO_P(inen)
|
|
SET_GPIO_P(polar)
|
|
SET_GPIO_P(edge)
|
|
SET_GPIO_P(both)
|
|
SET_GPIO_P(maska)
|
|
SET_GPIO_P(maskb)
|
|
|
|
/* Get a specific bit */
|
|
#define GET_GPIO(name) \
|
|
unsigned short get_gpio_ ## name(unsigned gpio) \
|
|
{ \
|
|
unsigned long flags; \
|
|
unsigned short ret; \
|
|
if (ANOMALY_05000311 || ANOMALY_05000323) \
|
|
flags = hard_local_irq_save(); \
|
|
ret = 0x01 & (gpio_array[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \
|
|
if (ANOMALY_05000311 || ANOMALY_05000323) { \
|
|
AWA_DUMMY_READ(name); \
|
|
hard_local_irq_restore(flags); \
|
|
} \
|
|
return ret; \
|
|
} \
|
|
EXPORT_SYMBOL(get_gpio_ ## name);
|
|
|
|
GET_GPIO(data)
|
|
GET_GPIO(dir)
|
|
GET_GPIO(inen)
|
|
GET_GPIO(polar)
|
|
GET_GPIO(edge)
|
|
GET_GPIO(both)
|
|
GET_GPIO(maska)
|
|
GET_GPIO(maskb)
|
|
|
|
/*Get current PORT date (16-bit word)*/
|
|
|
|
#define GET_GPIO_P(name) \
|
|
unsigned short get_gpiop_ ## name(unsigned gpio) \
|
|
{ \
|
|
unsigned long flags; \
|
|
unsigned short ret; \
|
|
if (ANOMALY_05000311 || ANOMALY_05000323) \
|
|
flags = hard_local_irq_save(); \
|
|
ret = (gpio_array[gpio_bank(gpio)]->name); \
|
|
if (ANOMALY_05000311 || ANOMALY_05000323) { \
|
|
AWA_DUMMY_READ(name); \
|
|
hard_local_irq_restore(flags); \
|
|
} \
|
|
return ret; \
|
|
} \
|
|
EXPORT_SYMBOL(get_gpiop_ ## name);
|
|
|
|
GET_GPIO_P(data)
|
|
GET_GPIO_P(dir)
|
|
GET_GPIO_P(inen)
|
|
GET_GPIO_P(polar)
|
|
GET_GPIO_P(edge)
|
|
GET_GPIO_P(both)
|
|
GET_GPIO_P(maska)
|
|
GET_GPIO_P(maskb)
|
|
|
|
|
|
#ifdef CONFIG_PM
|
|
DECLARE_RESERVED_MAP(wakeup, GPIO_BANK_NUM);
|
|
|
|
static const unsigned int sic_iwr_irqs[] = {
|
|
#if defined(BF533_FAMILY)
|
|
IRQ_PROG_INTB
|
|
#elif defined(BF537_FAMILY)
|
|
IRQ_PF_INTB_WATCH, IRQ_PORTG_INTB, IRQ_PH_INTB_MAC_TX
|
|
#elif defined(BF538_FAMILY)
|
|
IRQ_PORTF_INTB
|
|
#elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
|
|
IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB
|
|
#elif defined(BF561_FAMILY)
|
|
IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB
|
|
#else
|
|
# error no SIC_IWR defined
|
|
#endif
|
|
};
|
|
|
|
/***********************************************************
|
|
*
|
|
* FUNCTIONS: Blackfin PM Setup API
|
|
*
|
|
* INPUTS/OUTPUTS:
|
|
* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
|
|
* type -
|
|
* PM_WAKE_RISING
|
|
* PM_WAKE_FALLING
|
|
* PM_WAKE_HIGH
|
|
* PM_WAKE_LOW
|
|
* PM_WAKE_BOTH_EDGES
|
|
*
|
|
* DESCRIPTION: Blackfin PM Driver API
|
|
*
|
|
* CAUTION:
|
|
*************************************************************
|
|
* MODIFICATION HISTORY :
|
|
**************************************************************/
|
|
int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (check_gpio(gpio) < 0)
|
|
return -EINVAL;
|
|
|
|
flags = hard_local_irq_save();
|
|
if (ctrl)
|
|
reserve(wakeup, gpio);
|
|
else
|
|
unreserve(wakeup, gpio);
|
|
|
|
set_gpio_maskb(gpio, ctrl);
|
|
hard_local_irq_restore(flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int bfin_pm_standby_ctrl(unsigned ctrl)
|
|
{
|
|
u16 bank, mask, i;
|
|
|
|
for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
|
|
mask = map_entry(wakeup, i);
|
|
bank = gpio_bank(i);
|
|
|
|
if (mask)
|
|
bfin_internal_set_wake(sic_iwr_irqs[bank], ctrl);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
void bfin_gpio_pm_hibernate_suspend(void)
|
|
{
|
|
int i, bank;
|
|
|
|
#ifdef BF538_FAMILY
|
|
for (i = 0; i < ARRAY_SIZE(port_fer_saved); ++i)
|
|
port_fer_saved[i] = *port_fer[i];
|
|
#endif
|
|
|
|
for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
|
|
bank = gpio_bank(i);
|
|
|
|
#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
|
|
gpio_bank_saved[bank].fer = *port_fer[bank];
|
|
#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
|
|
gpio_bank_saved[bank].mux = *port_mux[bank];
|
|
#else
|
|
if (bank == 0)
|
|
gpio_bank_saved[bank].mux = bfin_read_PORT_MUX();
|
|
#endif
|
|
#endif
|
|
gpio_bank_saved[bank].data = gpio_array[bank]->data;
|
|
gpio_bank_saved[bank].inen = gpio_array[bank]->inen;
|
|
gpio_bank_saved[bank].polar = gpio_array[bank]->polar;
|
|
gpio_bank_saved[bank].dir = gpio_array[bank]->dir;
|
|
gpio_bank_saved[bank].edge = gpio_array[bank]->edge;
|
|
gpio_bank_saved[bank].both = gpio_array[bank]->both;
|
|
gpio_bank_saved[bank].maska = gpio_array[bank]->maska;
|
|
}
|
|
|
|
#ifdef BFIN_SPECIAL_GPIO_BANKS
|
|
bfin_special_gpio_pm_hibernate_suspend();
|
|
#endif
|
|
|
|
AWA_DUMMY_READ(maska);
|
|
}
|
|
|
|
void bfin_gpio_pm_hibernate_restore(void)
|
|
{
|
|
int i, bank;
|
|
|
|
#ifdef BF538_FAMILY
|
|
for (i = 0; i < ARRAY_SIZE(port_fer_saved); ++i)
|
|
*port_fer[i] = port_fer_saved[i];
|
|
#endif
|
|
|
|
for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
|
|
bank = gpio_bank(i);
|
|
|
|
#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
|
|
#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
|
|
*port_mux[bank] = gpio_bank_saved[bank].mux;
|
|
#else
|
|
if (bank == 0)
|
|
bfin_write_PORT_MUX(gpio_bank_saved[bank].mux);
|
|
#endif
|
|
*port_fer[bank] = gpio_bank_saved[bank].fer;
|
|
#endif
|
|
gpio_array[bank]->inen = gpio_bank_saved[bank].inen;
|
|
gpio_array[bank]->data_set = gpio_bank_saved[bank].data
|
|
& gpio_bank_saved[bank].dir;
|
|
gpio_array[bank]->dir = gpio_bank_saved[bank].dir;
|
|
gpio_array[bank]->polar = gpio_bank_saved[bank].polar;
|
|
gpio_array[bank]->edge = gpio_bank_saved[bank].edge;
|
|
gpio_array[bank]->both = gpio_bank_saved[bank].both;
|
|
gpio_array[bank]->maska = gpio_bank_saved[bank].maska;
|
|
}
|
|
|
|
#ifdef BFIN_SPECIAL_GPIO_BANKS
|
|
bfin_special_gpio_pm_hibernate_restore();
|
|
#endif
|
|
|
|
AWA_DUMMY_READ(maska);
|
|
}
|
|
|
|
|
|
#endif
|
|
#else /* CONFIG_BF54x */
|
|
#ifdef CONFIG_PM
|
|
|
|
int bfin_pm_standby_ctrl(unsigned ctrl)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
void bfin_gpio_pm_hibernate_suspend(void)
|
|
{
|
|
int i, bank;
|
|
|
|
for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
|
|
bank = gpio_bank(i);
|
|
|
|
gpio_bank_saved[bank].fer = gpio_array[bank]->port_fer;
|
|
gpio_bank_saved[bank].mux = gpio_array[bank]->port_mux;
|
|
gpio_bank_saved[bank].data = gpio_array[bank]->data;
|
|
gpio_bank_saved[bank].inen = gpio_array[bank]->inen;
|
|
gpio_bank_saved[bank].dir = gpio_array[bank]->dir_set;
|
|
}
|
|
}
|
|
|
|
void bfin_gpio_pm_hibernate_restore(void)
|
|
{
|
|
int i, bank;
|
|
|
|
for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
|
|
bank = gpio_bank(i);
|
|
|
|
gpio_array[bank]->port_mux = gpio_bank_saved[bank].mux;
|
|
gpio_array[bank]->port_fer = gpio_bank_saved[bank].fer;
|
|
gpio_array[bank]->inen = gpio_bank_saved[bank].inen;
|
|
gpio_array[bank]->data_set = gpio_bank_saved[bank].data
|
|
& gpio_bank_saved[bank].dir;
|
|
gpio_array[bank]->dir_set = gpio_bank_saved[bank].dir;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
unsigned short get_gpio_dir(unsigned gpio)
|
|
{
|
|
return (0x01 & (gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio)));
|
|
}
|
|
EXPORT_SYMBOL(get_gpio_dir);
|
|
|
|
#endif /* CONFIG_BF54x */
|
|
|
|
/***********************************************************
|
|
*
|
|
* FUNCTIONS: Blackfin Peripheral Resource Allocation
|
|
* and PortMux Setup
|
|
*
|
|
* INPUTS/OUTPUTS:
|
|
* per Peripheral Identifier
|
|
* label String
|
|
*
|
|
* DESCRIPTION: Blackfin Peripheral Resource Allocation and Setup API
|
|
*
|
|
* CAUTION:
|
|
*************************************************************
|
|
* MODIFICATION HISTORY :
|
|
**************************************************************/
|
|
|
|
int peripheral_request(unsigned short per, const char *label)
|
|
{
|
|
unsigned long flags;
|
|
unsigned short ident = P_IDENT(per);
|
|
|
|
/*
|
|
* Don't cares are pins with only one dedicated function
|
|
*/
|
|
|
|
if (per & P_DONTCARE)
|
|
return 0;
|
|
|
|
if (!(per & P_DEFINED))
|
|
return -ENODEV;
|
|
|
|
BUG_ON(ident >= MAX_RESOURCES);
|
|
|
|
flags = hard_local_irq_save();
|
|
|
|
/* If a pin can be muxed as either GPIO or peripheral, make
|
|
* sure it is not already a GPIO pin when we request it.
|
|
*/
|
|
if (unlikely(!check_gpio(ident) && is_reserved(gpio, ident, 1))) {
|
|
if (system_state == SYSTEM_BOOTING)
|
|
dump_stack();
|
|
printk(KERN_ERR
|
|
"%s: Peripheral %d is already reserved as GPIO by %s !\n",
|
|
__func__, ident, get_label(ident));
|
|
hard_local_irq_restore(flags);
|
|
return -EBUSY;
|
|
}
|
|
|
|
if (unlikely(is_reserved(peri, ident, 1))) {
|
|
|
|
/*
|
|
* Pin functions like AMC address strobes my
|
|
* be requested and used by several drivers
|
|
*/
|
|
|
|
#ifdef CONFIG_BF54x
|
|
if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) {
|
|
#else
|
|
if (!(per & P_MAYSHARE)) {
|
|
#endif
|
|
/*
|
|
* Allow that the identical pin function can
|
|
* be requested from the same driver twice
|
|
*/
|
|
|
|
if (cmp_label(ident, label) == 0)
|
|
goto anyway;
|
|
|
|
if (system_state == SYSTEM_BOOTING)
|
|
dump_stack();
|
|
printk(KERN_ERR
|
|
"%s: Peripheral %d function %d is already reserved by %s !\n",
|
|
__func__, ident, P_FUNCT2MUX(per), get_label(ident));
|
|
hard_local_irq_restore(flags);
|
|
return -EBUSY;
|
|
}
|
|
}
|
|
|
|
if (unlikely(portmux_group_check(per))) {
|
|
hard_local_irq_restore(flags);
|
|
return -EBUSY;
|
|
}
|
|
anyway:
|
|
reserve(peri, ident);
|
|
|
|
portmux_setup(per);
|
|
port_setup(ident, PERIPHERAL_USAGE);
|
|
|
|
hard_local_irq_restore(flags);
|
|
set_label(ident, label);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(peripheral_request);
|
|
|
|
int peripheral_request_list(const unsigned short per[], const char *label)
|
|
{
|
|
u16 cnt;
|
|
int ret;
|
|
|
|
for (cnt = 0; per[cnt] != 0; cnt++) {
|
|
|
|
ret = peripheral_request(per[cnt], label);
|
|
|
|
if (ret < 0) {
|
|
for ( ; cnt > 0; cnt--)
|
|
peripheral_free(per[cnt - 1]);
|
|
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(peripheral_request_list);
|
|
|
|
void peripheral_free(unsigned short per)
|
|
{
|
|
unsigned long flags;
|
|
unsigned short ident = P_IDENT(per);
|
|
|
|
if (per & P_DONTCARE)
|
|
return;
|
|
|
|
if (!(per & P_DEFINED))
|
|
return;
|
|
|
|
flags = hard_local_irq_save();
|
|
|
|
if (unlikely(!is_reserved(peri, ident, 0))) {
|
|
hard_local_irq_restore(flags);
|
|
return;
|
|
}
|
|
|
|
if (!(per & P_MAYSHARE))
|
|
port_setup(ident, GPIO_USAGE);
|
|
|
|
unreserve(peri, ident);
|
|
|
|
set_label(ident, "free");
|
|
|
|
hard_local_irq_restore(flags);
|
|
}
|
|
EXPORT_SYMBOL(peripheral_free);
|
|
|
|
void peripheral_free_list(const unsigned short per[])
|
|
{
|
|
u16 cnt;
|
|
for (cnt = 0; per[cnt] != 0; cnt++)
|
|
peripheral_free(per[cnt]);
|
|
}
|
|
EXPORT_SYMBOL(peripheral_free_list);
|
|
|
|
/***********************************************************
|
|
*
|
|
* FUNCTIONS: Blackfin GPIO Driver
|
|
*
|
|
* INPUTS/OUTPUTS:
|
|
* gpio PIO Number between 0 and MAX_BLACKFIN_GPIOS
|
|
* label String
|
|
*
|
|
* DESCRIPTION: Blackfin GPIO Driver API
|
|
*
|
|
* CAUTION:
|
|
*************************************************************
|
|
* MODIFICATION HISTORY :
|
|
**************************************************************/
|
|
|
|
int bfin_gpio_request(unsigned gpio, const char *label)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (check_gpio(gpio) < 0)
|
|
return -EINVAL;
|
|
|
|
flags = hard_local_irq_save();
|
|
|
|
/*
|
|
* Allow that the identical GPIO can
|
|
* be requested from the same driver twice
|
|
* Do nothing and return -
|
|
*/
|
|
|
|
if (cmp_label(gpio, label) == 0) {
|
|
hard_local_irq_restore(flags);
|
|
return 0;
|
|
}
|
|
|
|
if (unlikely(is_reserved(gpio, gpio, 1))) {
|
|
if (system_state == SYSTEM_BOOTING)
|
|
dump_stack();
|
|
printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n",
|
|
gpio, get_label(gpio));
|
|
hard_local_irq_restore(flags);
|
|
return -EBUSY;
|
|
}
|
|
if (unlikely(is_reserved(peri, gpio, 1))) {
|
|
if (system_state == SYSTEM_BOOTING)
|
|
dump_stack();
|
|
printk(KERN_ERR
|
|
"bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
|
|
gpio, get_label(gpio));
|
|
hard_local_irq_restore(flags);
|
|
return -EBUSY;
|
|
}
|
|
if (unlikely(is_reserved(gpio_irq, gpio, 1))) {
|
|
printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!"
|
|
" (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio);
|
|
}
|
|
#ifndef CONFIG_BF54x
|
|
else { /* Reset POLAR setting when acquiring a gpio for the first time */
|
|
set_gpio_polar(gpio, 0);
|
|
}
|
|
#endif
|
|
|
|
reserve(gpio, gpio);
|
|
set_label(gpio, label);
|
|
|
|
hard_local_irq_restore(flags);
|
|
|
|
port_setup(gpio, GPIO_USAGE);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(bfin_gpio_request);
|
|
|
|
void bfin_gpio_free(unsigned gpio)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (check_gpio(gpio) < 0)
|
|
return;
|
|
|
|
might_sleep();
|
|
|
|
flags = hard_local_irq_save();
|
|
|
|
if (unlikely(!is_reserved(gpio, gpio, 0))) {
|
|
if (system_state == SYSTEM_BOOTING)
|
|
dump_stack();
|
|
gpio_error(gpio);
|
|
hard_local_irq_restore(flags);
|
|
return;
|
|
}
|
|
|
|
unreserve(gpio, gpio);
|
|
|
|
set_label(gpio, "free");
|
|
|
|
hard_local_irq_restore(flags);
|
|
}
|
|
EXPORT_SYMBOL(bfin_gpio_free);
|
|
|
|
#ifdef BFIN_SPECIAL_GPIO_BANKS
|
|
DECLARE_RESERVED_MAP(special_gpio, gpio_bank(MAX_RESOURCES));
|
|
|
|
int bfin_special_gpio_request(unsigned gpio, const char *label)
|
|
{
|
|
unsigned long flags;
|
|
|
|
flags = hard_local_irq_save();
|
|
|
|
/*
|
|
* Allow that the identical GPIO can
|
|
* be requested from the same driver twice
|
|
* Do nothing and return -
|
|
*/
|
|
|
|
if (cmp_label(gpio, label) == 0) {
|
|
hard_local_irq_restore(flags);
|
|
return 0;
|
|
}
|
|
|
|
if (unlikely(is_reserved(special_gpio, gpio, 1))) {
|
|
hard_local_irq_restore(flags);
|
|
printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n",
|
|
gpio, get_label(gpio));
|
|
|
|
return -EBUSY;
|
|
}
|
|
if (unlikely(is_reserved(peri, gpio, 1))) {
|
|
hard_local_irq_restore(flags);
|
|
printk(KERN_ERR
|
|
"bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
|
|
gpio, get_label(gpio));
|
|
|
|
return -EBUSY;
|
|
}
|
|
|
|
reserve(special_gpio, gpio);
|
|
reserve(peri, gpio);
|
|
|
|
set_label(gpio, label);
|
|
hard_local_irq_restore(flags);
|
|
port_setup(gpio, GPIO_USAGE);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(bfin_special_gpio_request);
|
|
|
|
void bfin_special_gpio_free(unsigned gpio)
|
|
{
|
|
unsigned long flags;
|
|
|
|
might_sleep();
|
|
|
|
flags = hard_local_irq_save();
|
|
|
|
if (unlikely(!is_reserved(special_gpio, gpio, 0))) {
|
|
gpio_error(gpio);
|
|
hard_local_irq_restore(flags);
|
|
return;
|
|
}
|
|
|
|
unreserve(special_gpio, gpio);
|
|
unreserve(peri, gpio);
|
|
set_label(gpio, "free");
|
|
hard_local_irq_restore(flags);
|
|
}
|
|
EXPORT_SYMBOL(bfin_special_gpio_free);
|
|
#endif
|
|
|
|
|
|
int bfin_gpio_irq_request(unsigned gpio, const char *label)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (check_gpio(gpio) < 0)
|
|
return -EINVAL;
|
|
|
|
flags = hard_local_irq_save();
|
|
|
|
if (unlikely(is_reserved(peri, gpio, 1))) {
|
|
if (system_state == SYSTEM_BOOTING)
|
|
dump_stack();
|
|
printk(KERN_ERR
|
|
"bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
|
|
gpio, get_label(gpio));
|
|
hard_local_irq_restore(flags);
|
|
return -EBUSY;
|
|
}
|
|
if (unlikely(is_reserved(gpio, gpio, 1)))
|
|
printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved by %s! "
|
|
"(Documentation/blackfin/bfin-gpio-notes.txt)\n",
|
|
gpio, get_label(gpio));
|
|
|
|
reserve(gpio_irq, gpio);
|
|
set_label(gpio, label);
|
|
|
|
hard_local_irq_restore(flags);
|
|
|
|
port_setup(gpio, GPIO_USAGE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void bfin_gpio_irq_free(unsigned gpio)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (check_gpio(gpio) < 0)
|
|
return;
|
|
|
|
flags = hard_local_irq_save();
|
|
|
|
if (unlikely(!is_reserved(gpio_irq, gpio, 0))) {
|
|
if (system_state == SYSTEM_BOOTING)
|
|
dump_stack();
|
|
gpio_error(gpio);
|
|
hard_local_irq_restore(flags);
|
|
return;
|
|
}
|
|
|
|
unreserve(gpio_irq, gpio);
|
|
|
|
set_label(gpio, "free");
|
|
|
|
hard_local_irq_restore(flags);
|
|
}
|
|
|
|
static inline void __bfin_gpio_direction_input(unsigned gpio)
|
|
{
|
|
#ifdef CONFIG_BF54x
|
|
gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio);
|
|
#else
|
|
gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
|
|
#endif
|
|
gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
|
|
}
|
|
|
|
int bfin_gpio_direction_input(unsigned gpio)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (unlikely(!is_reserved(gpio, gpio, 0))) {
|
|
gpio_error(gpio);
|
|
return -EINVAL;
|
|
}
|
|
|
|
flags = hard_local_irq_save();
|
|
__bfin_gpio_direction_input(gpio);
|
|
AWA_DUMMY_READ(inen);
|
|
hard_local_irq_restore(flags);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(bfin_gpio_direction_input);
|
|
|
|
void bfin_gpio_irq_prepare(unsigned gpio)
|
|
{
|
|
#ifdef CONFIG_BF54x
|
|
unsigned long flags;
|
|
#endif
|
|
|
|
port_setup(gpio, GPIO_USAGE);
|
|
|
|
#ifdef CONFIG_BF54x
|
|
flags = hard_local_irq_save();
|
|
__bfin_gpio_direction_input(gpio);
|
|
hard_local_irq_restore(flags);
|
|
#endif
|
|
}
|
|
|
|
void bfin_gpio_set_value(unsigned gpio, int arg)
|
|
{
|
|
if (arg)
|
|
gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
|
|
else
|
|
gpio_array[gpio_bank(gpio)]->data_clear = gpio_bit(gpio);
|
|
}
|
|
EXPORT_SYMBOL(bfin_gpio_set_value);
|
|
|
|
int bfin_gpio_direction_output(unsigned gpio, int value)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (unlikely(!is_reserved(gpio, gpio, 0))) {
|
|
gpio_error(gpio);
|
|
return -EINVAL;
|
|
}
|
|
|
|
flags = hard_local_irq_save();
|
|
|
|
gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
|
|
gpio_set_value(gpio, value);
|
|
#ifdef CONFIG_BF54x
|
|
gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio);
|
|
#else
|
|
gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
|
|
#endif
|
|
|
|
AWA_DUMMY_READ(dir);
|
|
hard_local_irq_restore(flags);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(bfin_gpio_direction_output);
|
|
|
|
int bfin_gpio_get_value(unsigned gpio)
|
|
{
|
|
#ifdef CONFIG_BF54x
|
|
return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio)));
|
|
#else
|
|
unsigned long flags;
|
|
|
|
if (unlikely(get_gpio_edge(gpio))) {
|
|
int ret;
|
|
flags = hard_local_irq_save();
|
|
set_gpio_edge(gpio, 0);
|
|
ret = get_gpio_data(gpio);
|
|
set_gpio_edge(gpio, 1);
|
|
hard_local_irq_restore(flags);
|
|
return ret;
|
|
} else
|
|
return get_gpio_data(gpio);
|
|
#endif
|
|
}
|
|
EXPORT_SYMBOL(bfin_gpio_get_value);
|
|
|
|
/* If we are booting from SPI and our board lacks a strong enough pull up,
|
|
* the core can reset and execute the bootrom faster than the resistor can
|
|
* pull the signal logically high. To work around this (common) error in
|
|
* board design, we explicitly set the pin back to GPIO mode, force /CS
|
|
* high, and wait for the electrons to do their thing.
|
|
*
|
|
* This function only makes sense to be called from reset code, but it
|
|
* lives here as we need to force all the GPIO states w/out going through
|
|
* BUG() checks and such.
|
|
*/
|
|
void bfin_reset_boot_spi_cs(unsigned short pin)
|
|
{
|
|
unsigned short gpio = P_IDENT(pin);
|
|
port_setup(gpio, GPIO_USAGE);
|
|
gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
|
|
AWA_DUMMY_READ(data_set);
|
|
udelay(1);
|
|
}
|
|
|
|
#if defined(CONFIG_PROC_FS)
|
|
static int gpio_proc_show(struct seq_file *m, void *v)
|
|
{
|
|
int c, irq, gpio;
|
|
|
|
for (c = 0; c < MAX_RESOURCES; c++) {
|
|
irq = is_reserved(gpio_irq, c, 1);
|
|
gpio = is_reserved(gpio, c, 1);
|
|
if (!check_gpio(c) && (gpio || irq))
|
|
seq_printf(m, "GPIO_%d: \t%s%s \t\tGPIO %s\n", c,
|
|
get_label(c), (gpio && irq) ? " *" : "",
|
|
get_gpio_dir(c) ? "OUTPUT" : "INPUT");
|
|
else if (is_reserved(peri, c, 1))
|
|
seq_printf(m, "GPIO_%d: \t%s \t\tPeripheral\n", c, get_label(c));
|
|
else
|
|
continue;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gpio_proc_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, gpio_proc_show, NULL);
|
|
}
|
|
|
|
static const struct file_operations gpio_proc_ops = {
|
|
.open = gpio_proc_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
static __init int gpio_register_proc(void)
|
|
{
|
|
struct proc_dir_entry *proc_gpio;
|
|
|
|
proc_gpio = proc_create("gpio", S_IRUGO, NULL, &gpio_proc_ops);
|
|
return proc_gpio != NULL;
|
|
}
|
|
__initcall(gpio_register_proc);
|
|
#endif
|
|
|
|
#ifdef CONFIG_GPIOLIB
|
|
static int bfin_gpiolib_direction_input(struct gpio_chip *chip, unsigned gpio)
|
|
{
|
|
return bfin_gpio_direction_input(gpio);
|
|
}
|
|
|
|
static int bfin_gpiolib_direction_output(struct gpio_chip *chip, unsigned gpio, int level)
|
|
{
|
|
return bfin_gpio_direction_output(gpio, level);
|
|
}
|
|
|
|
static int bfin_gpiolib_get_value(struct gpio_chip *chip, unsigned gpio)
|
|
{
|
|
return bfin_gpio_get_value(gpio);
|
|
}
|
|
|
|
static void bfin_gpiolib_set_value(struct gpio_chip *chip, unsigned gpio, int value)
|
|
{
|
|
return bfin_gpio_set_value(gpio, value);
|
|
}
|
|
|
|
static int bfin_gpiolib_gpio_request(struct gpio_chip *chip, unsigned gpio)
|
|
{
|
|
return bfin_gpio_request(gpio, chip->label);
|
|
}
|
|
|
|
static void bfin_gpiolib_gpio_free(struct gpio_chip *chip, unsigned gpio)
|
|
{
|
|
return bfin_gpio_free(gpio);
|
|
}
|
|
|
|
static int bfin_gpiolib_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
|
|
{
|
|
return gpio + GPIO_IRQ_BASE;
|
|
}
|
|
|
|
static struct gpio_chip bfin_chip = {
|
|
.label = "BFIN-GPIO",
|
|
.direction_input = bfin_gpiolib_direction_input,
|
|
.get = bfin_gpiolib_get_value,
|
|
.direction_output = bfin_gpiolib_direction_output,
|
|
.set = bfin_gpiolib_set_value,
|
|
.request = bfin_gpiolib_gpio_request,
|
|
.free = bfin_gpiolib_gpio_free,
|
|
.to_irq = bfin_gpiolib_gpio_to_irq,
|
|
.base = 0,
|
|
.ngpio = MAX_BLACKFIN_GPIOS,
|
|
};
|
|
|
|
static int __init bfin_gpiolib_setup(void)
|
|
{
|
|
return gpiochip_add(&bfin_chip);
|
|
}
|
|
arch_initcall(bfin_gpiolib_setup);
|
|
#endif
|