UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/include/asm-mips/sn/klconfig.h

899 lines
31 KiB
C
Raw Blame History

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Derived from IRIX <sys/SN/klconfig.h>.
*
* Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc.
* Copyright (C) 1999, 2000 by Ralf Baechle
*/
#ifndef _ASM_SN_KLCONFIG_H
#define _ASM_SN_KLCONFIG_H
/*
* The KLCONFIG structures store info about the various BOARDs found
* during Hardware Discovery. In addition, it stores info about the
* components found on the BOARDs.
*/
/*
* WARNING:
* Certain assembly language routines (notably xxxxx.s) in the IP27PROM
* will depend on the format of the data structures in this file. In
* most cases, rearranging the fields can seriously break things.
* Adding fields in the beginning or middle can also break things.
* Add fields if necessary, to the end of a struct in such a way
* that offsets of existing fields do not change.
*/
#include <linux/types.h>
#include <asm/sn/types.h>
#if defined(CONFIG_SGI_IP27)
#include <asm/sn/sn0/addrs.h>
//#include <sys/SN/router.h>
// XXX Stolen from <sys/SN/router.h>:
#define MAX_ROUTER_PORTS (6) /* Max. number of ports on a router */
#include <asm/sn/fru.h>
//#include <sys/graph.h>
//#include <sys/xtalk/xbow.h>
#elif defined(CONFIG_SGI_IP35)
#include <asm/sn/sn1/addrs.h>
#include <sys/sn/router.h>
#include <sys/graph.h>
#include <asm/xtalk/xbow.h>
#endif /* !CONFIG_SGI_IP27 && !CONFIG_SGI_IP35 */
#if defined(CONFIG_SGI_IP27) || defined(CONFIG_SGI_IP35)
#include <asm/sn/agent.h>
#include <asm/arc/types.h>
#include <asm/arc/hinv.h>
#if defined(CONFIG_SGI_IP35)
// The hack file has to be before vector and after sn0_fru....
#include <asm/hack.h>
#include <asm/sn/vector.h>
#include <asm/xtalk/xtalk.h>
#endif /* CONFIG_SGI_IP35 */
#endif /* CONFIG_SGI_IP27 || CONFIG_SGI_IP35 */
typedef u64 nic_t;
#define KLCFGINFO_MAGIC 0xbeedbabe
typedef s32 klconf_off_t;
/*
* Some IMPORTANT OFFSETS. These are the offsets on all NODES.
*/
#define MAX_MODULE_ID 255
#define SIZE_PAD 4096 /* 4k padding for structures */
/*
* 1 NODE brd, 2 Router brd (1 8p, 1 meta), 6 Widgets,
* 2 Midplanes assuming no pci card cages
*/
#define MAX_SLOTS_PER_NODE (1 + 2 + 6 + 2)
/* XXX if each node is guranteed to have some memory */
#define MAX_PCI_DEVS 8
/* lboard_t->brd_flags fields */
/* All bits in this field are currently used. Try the pad fields if
you need more flag bits */
#define ENABLE_BOARD 0x01
#define FAILED_BOARD 0x02
#define DUPLICATE_BOARD 0x04 /* Boards like midplanes/routers which
are discovered twice. Use one of them */
#define VISITED_BOARD 0x08 /* Used for compact hub numbering. */
#define LOCAL_MASTER_IO6 0x10 /* master io6 for that node */
#define GLOBAL_MASTER_IO6 0x20
#define THIRD_NIC_PRESENT 0x40 /* for future use */
#define SECOND_NIC_PRESENT 0x80 /* addons like MIO are present */
/* klinfo->flags fields */
#define KLINFO_ENABLE 0x01 /* This component is enabled */
#define KLINFO_FAILED 0x02 /* This component failed */
#define KLINFO_DEVICE 0x04 /* This component is a device */
#define KLINFO_VISITED 0x08 /* This component has been visited */
#define KLINFO_CONTROLLER 0x10 /* This component is a device controller */
#define KLINFO_INSTALL 0x20 /* Install a driver */
#define KLINFO_HEADLESS 0x40 /* Headless (or hubless) component */
#define IS_CONSOLE_IOC3(i) ((((klinfo_t *)i)->flags) & KLINFO_INSTALL)
#define GB2 0x80000000
#define MAX_RSV_PTRS 32
/* Structures to manage various data storage areas */
/* The numbers must be contiguous since the array index i
is used in the code to allocate various areas.
*/
#define BOARD_STRUCT 0
#define COMPONENT_STRUCT 1
#define ERRINFO_STRUCT 2
#define KLMALLOC_TYPE_MAX (ERRINFO_STRUCT + 1)
#define DEVICE_STRUCT 3
typedef struct console_s {
unsigned long uart_base;
unsigned long config_base;
unsigned long memory_base;
short baud;
short flag;
int type;
nasid_t nasid;
char wid;
char npci;
nic_t baseio_nic;
} console_t;
typedef struct klc_malloc_hdr {
klconf_off_t km_base;
klconf_off_t km_limit;
klconf_off_t km_current;
} klc_malloc_hdr_t;
/* Functions/macros needed to use this structure */
typedef struct kl_config_hdr {
u64 ch_magic; /* set this to KLCFGINFO_MAGIC */
u32 ch_version; /* structure version number */
klconf_off_t ch_malloc_hdr_off; /* offset of ch_malloc_hdr */
klconf_off_t ch_cons_off; /* offset of ch_cons */
klconf_off_t ch_board_info; /* the link list of boards */
console_t ch_cons_info; /* address info of the console */
klc_malloc_hdr_t ch_malloc_hdr[KLMALLOC_TYPE_MAX];
confidence_t ch_sw_belief; /* confidence that software is bad*/
confidence_t ch_sn0net_belief; /* confidence that sn0net is bad */
} kl_config_hdr_t;
#define KL_CONFIG_HDR(_nasid) ((kl_config_hdr_t *)(KLCONFIG_ADDR(_nasid)))
#define KL_CONFIG_INFO_OFFSET(_nasid) \
(KL_CONFIG_HDR(_nasid)->ch_board_info)
#define KL_CONFIG_INFO_SET_OFFSET(_nasid, _off) \
(KL_CONFIG_HDR(_nasid)->ch_board_info = (_off))
#define KL_CONFIG_INFO(_nasid) \
(lboard_t *)((KL_CONFIG_HDR(_nasid)->ch_board_info) ? \
NODE_OFFSET_TO_K1((_nasid), KL_CONFIG_HDR(_nasid)->ch_board_info) : \
0)
#define KL_CONFIG_MAGIC(_nasid) (KL_CONFIG_HDR(_nasid)->ch_magic)
#define KL_CONFIG_CHECK_MAGIC(_nasid) \
(KL_CONFIG_HDR(_nasid)->ch_magic == KLCFGINFO_MAGIC)
#define KL_CONFIG_HDR_INIT_MAGIC(_nasid) \
(KL_CONFIG_HDR(_nasid)->ch_magic = KLCFGINFO_MAGIC)
/* --- New Macros for the changed kl_config_hdr_t structure --- */
#define PTR_CH_MALLOC_HDR(_k) ((klc_malloc_hdr_t *)\
((unsigned long)_k + (_k->ch_malloc_hdr_off)))
#define KL_CONFIG_CH_MALLOC_HDR(_n) PTR_CH_MALLOC_HDR(KL_CONFIG_HDR(_n))
#define PTR_CH_CONS_INFO(_k) ((console_t *)\
((unsigned long)_k + (_k->ch_cons_off)))
#define KL_CONFIG_CH_CONS_INFO(_n) PTR_CH_CONS_INFO(KL_CONFIG_HDR(_n))
/* ------------------------------------------------------------- */
#define KL_CONFIG_INFO_START(_nasid) \
(klconf_off_t)(KLCONFIG_OFFSET(_nasid) + sizeof(kl_config_hdr_t))
#define KL_CONFIG_BOARD_NASID(_brd) ((_brd)->brd_nasid)
#define KL_CONFIG_BOARD_SET_NEXT(_brd, _off) ((_brd)->brd_next = (_off))
#define KL_CONFIG_DUPLICATE_BOARD(_brd) ((_brd)->brd_flags & DUPLICATE_BOARD)
#define XBOW_PORT_TYPE_HUB(_xbowp, _link) \
((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_HUB)
#define XBOW_PORT_TYPE_IO(_xbowp, _link) \
((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_IO)
#define XBOW_PORT_IS_ENABLED(_xbowp, _link) \
((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_ENABLE)
#define XBOW_PORT_NASID(_xbowp, _link) \
((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_nasid)
#define XBOW_PORT_IO 0x1
#define XBOW_PORT_HUB 0x2
#define XBOW_PORT_ENABLE 0x4
#define SN0_PORT_FENCE_SHFT 0
#define SN0_PORT_FENCE_MASK (1 << SN0_PORT_FENCE_SHFT)
/*
* The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD
* can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to
* the LOCAL/current NODE. REMOTE means it is attached to a different
* node.(TBD - Need a way to treat ROUTER boards.)
*
* There are 2 different structures to represent these boards -
* lboard - Local board, rboard - remote board. These 2 structures
* can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer
* Figure below). The first byte of the rboard or lboard structure
* is used to find out its type - no unions are used.
* If it is a lboard, then the config info of this board will be found
* on the local node. (LOCAL NODE BASE + offset value gives pointer to
* the structure.
* If it is a rboard, the local structure contains the node number
* and the offset of the beginning of the LINKED LIST on the remote node.
* The details of the hardware on a remote node can be built locally,
* if required, by reading the LINKED LIST on the remote node and
* ignoring all the rboards on that node.
*
* The local node uses the REMOTE NODE NUMBER + OFFSET to point to the
* First board info on the remote node. The remote node list is
* traversed as the local list, using the REMOTE BASE ADDRESS and not
* the local base address and ignoring all rboard values.
*
*
KLCONFIG
+------------+ +------------+ +------------+ +------------+
| lboard | +-->| lboard | +-->| rboard | +-->| lboard |
+------------+ | +------------+ | +------------+ | +------------+
| board info | | | board info | | |errinfo,bptr| | | board info |
+------------+ | +------------+ | +------------+ | +------------+
| offset |--+ | offset |--+ | offset |--+ |offset=NULL |
+------------+ +------------+ +------------+ +------------+
+------------+
| board info |
+------------+ +--------------------------------+
| compt 1 |------>| type, rev, diaginfo, size ... | (CPU)
+------------+ +--------------------------------+
| compt 2 |--+
+------------+ | +--------------------------------+
| ... | +--->| type, rev, diaginfo, size ... | (MEM_BANK)
+------------+ +--------------------------------+
| errinfo |--+
+------------+ | +--------------------------------+
+--->|r/l brd errinfo,compt err flags |
+--------------------------------+
*
* Each BOARD consists of COMPONENTs and the BOARD structure has
* pointers (offsets) to its COMPONENT structure.
* The COMPONENT structure has version info, size and speed info, revision,
* error info and the NIC info. This structure can accommodate any
* BOARD with arbitrary COMPONENT composition.
*
* The ERRORINFO part of each BOARD has error information
* that describes errors about the BOARD itself. It also has flags to
* indicate the COMPONENT(s) on the board that have errors. The error
* information specific to the COMPONENT is present in the respective
* COMPONENT structure.
*
* The ERRORINFO structure is also treated like a COMPONENT, ie. the
* BOARD has pointers(offset) to the ERRORINFO structure. The rboard
* structure also has a pointer to the ERRORINFO structure. This is
* the place to store ERRORINFO about a REMOTE NODE, if the HUB on
* that NODE is not working or if the REMOTE MEMORY is BAD. In cases where
* only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can
* be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info
* which is present on the REMOTE NODE.(TBD)
* REMOTE ERRINFO can be stored on any of the nearest nodes
* or on all the nearest nodes.(TBD)
* Like BOARD structures, REMOTE ERRINFO structures can be built locally
* using the rboard errinfo pointer.
*
* In order to get useful information from this Data organization, a set of
* interface routines are provided (TBD). The important thing to remember while
* manipulating the structures, is that, the NODE number information should
* be used. If the NODE is non-zero (remote) then each offset should
* be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR.
* This includes offsets for BOARDS, COMPONENTS and ERRORINFO.
*
* Note that these structures do not provide much info about connectivity.
* That info will be part of HWGRAPH, which is an extension of the cfg_t
* data structure. (ref IP27prom/cfg.h) It has to be extended to include
* the IO part of the Network(TBD).
*
* The data structures below define the above concepts.
*/
/*
* Values for CPU types
*/
#define KL_CPU_R4000 0x1 /* Standard R4000 */
#define KL_CPU_TFP 0x2 /* TFP processor */
#define KL_CPU_R10000 0x3 /* R10000 (T5) */
#define KL_CPU_NONE (-1) /* no cpu present in slot */
/*
* IP27 BOARD classes
*/
#define KLCLASS_MASK 0xf0
#define KLCLASS_NONE 0x00
#define KLCLASS_NODE 0x10 /* CPU, Memory and HUB board */
#define KLCLASS_CPU KLCLASS_NODE
#define KLCLASS_IO 0x20 /* BaseIO, 4 ch SCSI, ethernet, FDDI
and the non-graphics widget boards */
#define KLCLASS_ROUTER 0x30 /* Router board */
#define KLCLASS_MIDPLANE 0x40 /* We need to treat this as a board
so that we can record error info */
#define KLCLASS_GFX 0x50 /* graphics boards */
#define KLCLASS_PSEUDO_GFX 0x60 /* HDTV type cards that use a gfx
* hw ifc to xtalk and are not gfx
* class for sw purposes */
#define KLCLASS_MAX 7 /* Bump this if a new CLASS is added */
#define KLTYPE_MAX 10 /* Bump this if a new CLASS is added */
#define KLCLASS_UNKNOWN 0xf0
#define KLCLASS(_x) ((_x) & KLCLASS_MASK)
/*
* IP27 board types
*/
#define KLTYPE_MASK 0x0f
#define KLTYPE_NONE 0x00
#define KLTYPE_EMPTY 0x00
#define KLTYPE_WEIRDCPU (KLCLASS_CPU | 0x0)
#define KLTYPE_IP27 (KLCLASS_CPU | 0x1) /* 2 CPUs(R10K) per board */
#define KLTYPE_WEIRDIO (KLCLASS_IO | 0x0)
#define KLTYPE_BASEIO (KLCLASS_IO | 0x1) /* IOC3, SuperIO, Bridge, SCSI */
#define KLTYPE_IO6 KLTYPE_BASEIO /* Additional name */
#define KLTYPE_4CHSCSI (KLCLASS_IO | 0x2)
#define KLTYPE_MSCSI KLTYPE_4CHSCSI /* Additional name */
#define KLTYPE_ETHERNET (KLCLASS_IO | 0x3)
#define KLTYPE_MENET KLTYPE_ETHERNET /* Additional name */
#define KLTYPE_FDDI (KLCLASS_IO | 0x4)
#define KLTYPE_UNUSED (KLCLASS_IO | 0x5) /* XXX UNUSED */
#define KLTYPE_HAROLD (KLCLASS_IO | 0x6) /* PCI SHOE BOX */
#define KLTYPE_PCI KLTYPE_HAROLD
#define KLTYPE_VME (KLCLASS_IO | 0x7) /* Any 3rd party VME card */
#define KLTYPE_MIO (KLCLASS_IO | 0x8)
#define KLTYPE_FC (KLCLASS_IO | 0x9)
#define KLTYPE_LINC (KLCLASS_IO | 0xA)
#define KLTYPE_TPU (KLCLASS_IO | 0xB) /* Tensor Processing Unit */
#define KLTYPE_GSN_A (KLCLASS_IO | 0xC) /* Main GSN board */
#define KLTYPE_GSN_B (KLCLASS_IO | 0xD) /* Auxiliary GSN board */
#define KLTYPE_GFX (KLCLASS_GFX | 0x0) /* unknown graphics type */
#define KLTYPE_GFX_KONA (KLCLASS_GFX | 0x1) /* KONA graphics on IP27 */
#define KLTYPE_GFX_MGRA (KLCLASS_GFX | 0x3) /* MGRAS graphics on IP27 */
#define KLTYPE_WEIRDROUTER (KLCLASS_ROUTER | 0x0)
#define KLTYPE_ROUTER (KLCLASS_ROUTER | 0x1)
#define KLTYPE_ROUTER2 KLTYPE_ROUTER /* Obsolete! */
#define KLTYPE_NULL_ROUTER (KLCLASS_ROUTER | 0x2)
#define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3)
#define KLTYPE_WEIRDMIDPLANE (KLCLASS_MIDPLANE | 0x0)
#define KLTYPE_MIDPLANE8 (KLCLASS_MIDPLANE | 0x1) /* 8 slot backplane */
#define KLTYPE_MIDPLANE KLTYPE_MIDPLANE8
#define KLTYPE_PBRICK_XBOW (KLCLASS_MIDPLANE | 0x2)
#define KLTYPE_IOBRICK (KLCLASS_IOBRICK | 0x0)
#define KLTYPE_IBRICK (KLCLASS_IOBRICK | 0x1)
#define KLTYPE_PBRICK (KLCLASS_IOBRICK | 0x2)
#define KLTYPE_XBRICK (KLCLASS_IOBRICK | 0x3)
#define KLTYPE_PBRICK_BRIDGE KLTYPE_PBRICK
/* The value of type should be more than 8 so that hinv prints
* out the board name from the NIC string. For values less than
* 8 the name of the board needs to be hard coded in a few places.
* When bringup started nic names had not standardized and so we
* had to hard code. (For people interested in history.)
*/
#define KLTYPE_XTHD (KLCLASS_PSEUDO_GFX | 0x9)
#define KLTYPE_UNKNOWN (KLCLASS_UNKNOWN | 0xf)
#define KLTYPE(_x) ((_x) & KLTYPE_MASK)
#define IS_MIO_PRESENT(l) ((l->brd_type == KLTYPE_BASEIO) && \
(l->brd_flags & SECOND_NIC_PRESENT))
#define IS_MIO_IOC3(l,n) (IS_MIO_PRESENT(l) && (n > 2))
/*
* board structures
*/
#define MAX_COMPTS_PER_BRD 24
#define LOCAL_BOARD 1
#define REMOTE_BOARD 2
#define LBOARD_STRUCT_VERSION 2
typedef struct lboard_s {
klconf_off_t brd_next; /* Next BOARD */
unsigned char struct_type; /* type of structure, local or remote */
unsigned char brd_type; /* type+class */
unsigned char brd_sversion; /* version of this structure */
unsigned char brd_brevision; /* board revision */
unsigned char brd_promver; /* board prom version, if any */
unsigned char brd_flags; /* Enabled, Disabled etc */
unsigned char brd_slot; /* slot number */
unsigned short brd_debugsw; /* Debug switches */
moduleid_t brd_module; /* module to which it belongs */
partid_t brd_partition; /* Partition number */
unsigned short brd_diagval; /* diagnostic value */
unsigned short brd_diagparm; /* diagnostic parameter */
unsigned char brd_inventory; /* inventory history */
unsigned char brd_numcompts; /* Number of components */
nic_t brd_nic; /* Number in CAN */
nasid_t brd_nasid; /* passed parameter */
klconf_off_t brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */
klconf_off_t brd_errinfo; /* Board's error information */
struct lboard_s *brd_parent; /* Logical parent for this brd */
vertex_hdl_t brd_graph_link; /* vertex hdl to connect extern compts */
confidence_t brd_confidence; /* confidence that the board is bad */
nasid_t brd_owner; /* who owns this board */
unsigned char brd_nic_flags; /* To handle 8 more NICs */
char brd_name[32];
} lboard_t;
/*
* Make sure we pass back the calias space address for local boards.
* klconfig board traversal and error structure extraction defines.
*/
#define BOARD_SLOT(_brd) ((_brd)->brd_slot)
#define KLCF_CLASS(_brd) KLCLASS((_brd)->brd_type)
#define KLCF_TYPE(_brd) KLTYPE((_brd)->brd_type)
#define KLCF_REMOTE(_brd) (((_brd)->struct_type & LOCAL_BOARD) ? 0 : 1)
#define KLCF_NUM_COMPS(_brd) ((_brd)->brd_numcompts)
#define KLCF_MODULE_ID(_brd) ((_brd)->brd_module)
#define KLCF_NEXT(_brd) \
((_brd)->brd_next ? \
(lboard_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), (_brd)->brd_next)):\
NULL)
#define KLCF_COMP(_brd, _ndx) \
(klinfo_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), \
(_brd)->brd_compts[(_ndx)]))
#define KLCF_COMP_ERROR(_brd, _comp) \
(NODE_OFFSET_TO_K1(NASID_GET(_brd), (_comp)->errinfo))
#define KLCF_COMP_TYPE(_comp) ((_comp)->struct_type)
#define KLCF_BRIDGE_W_ID(_comp) ((_comp)->physid) /* Widget ID */
/*
* Generic info structure. This stores common info about a
* component.
*/
typedef struct klinfo_s { /* Generic info */
unsigned char struct_type; /* type of this structure */
unsigned char struct_version; /* version of this structure */
unsigned char flags; /* Enabled, disabled etc */
unsigned char revision; /* component revision */
unsigned short diagval; /* result of diagnostics */
unsigned short diagparm; /* diagnostic parameter */
unsigned char inventory; /* previous inventory status */
nic_t nic; /* MUst be aligned properly */
unsigned char physid; /* physical id of component */
unsigned int virtid; /* virtual id as seen by system */
unsigned char widid; /* Widget id - if applicable */
nasid_t nasid; /* node number - from parent */
char pad1; /* pad out structure. */
char pad2; /* pad out structure. */
COMPONENT *arcs_compt; /* ptr to the arcs struct for ease*/
klconf_off_t errinfo; /* component specific errors */
unsigned short pad3; /* pci fields have moved over to */
unsigned short pad4; /* klbri_t */
} klinfo_t ;
#define KLCONFIG_INFO_ENABLED(_i) ((_i)->flags & KLINFO_ENABLE)
/*
* Component structures.
* Following are the currently identified components:
* CPU, HUB, MEM_BANK,
* XBOW(consists of 16 WIDGETs, each of which can be HUB or GRAPHICS or BRIDGE)
* BRIDGE, IOC3, SuperIO, SCSI, FDDI
* ROUTER
* GRAPHICS
*/
#define KLSTRUCT_UNKNOWN 0
#define KLSTRUCT_CPU 1
#define KLSTRUCT_HUB 2
#define KLSTRUCT_MEMBNK 3
#define KLSTRUCT_XBOW 4
#define KLSTRUCT_BRI 5
#define KLSTRUCT_IOC3 6
#define KLSTRUCT_PCI 7
#define KLSTRUCT_VME 8
#define KLSTRUCT_ROU 9
#define KLSTRUCT_GFX 10
#define KLSTRUCT_SCSI 11
#define KLSTRUCT_FDDI 12
#define KLSTRUCT_MIO 13
#define KLSTRUCT_DISK 14
#define KLSTRUCT_TAPE 15
#define KLSTRUCT_CDROM 16
#define KLSTRUCT_HUB_UART 17
#define KLSTRUCT_IOC3ENET 18
#define KLSTRUCT_IOC3UART 19
#define KLSTRUCT_UNUSED 20 /* XXX UNUSED */
#define KLSTRUCT_IOC3PCKM 21
#define KLSTRUCT_RAD 22
#define KLSTRUCT_HUB_TTY 23
#define KLSTRUCT_IOC3_TTY 24
/* Early Access IO proms are compatible
only with KLSTRUCT values upto 24. */
#define KLSTRUCT_FIBERCHANNEL 25
#define KLSTRUCT_MOD_SERIAL_NUM 26
#define KLSTRUCT_IOC3MS 27
#define KLSTRUCT_TPU 28
#define KLSTRUCT_GSN_A 29
#define KLSTRUCT_GSN_B 30
#define KLSTRUCT_XTHD 31
/*
* These are the indices of various components within a lboard structure.
*/
#define IP27_CPU0_INDEX 0
#define IP27_CPU1_INDEX 1
#define IP27_HUB_INDEX 2
#define IP27_MEM_INDEX 3
#define BASEIO_BRIDGE_INDEX 0
#define BASEIO_IOC3_INDEX 1
#define BASEIO_SCSI1_INDEX 2
#define BASEIO_SCSI2_INDEX 3
#define MIDPLANE_XBOW_INDEX 0
#define ROUTER_COMPONENT_INDEX 0
#define CH4SCSI_BRIDGE_INDEX 0
/* Info holders for various hardware components */
typedef u64 *pci_t;
typedef u64 *vmeb_t;
typedef u64 *vmed_t;
typedef u64 *fddi_t;
typedef u64 *scsi_t;
typedef u64 *mio_t;
typedef u64 *graphics_t;
typedef u64 *router_t;
/*
* The port info in ip27_cfg area translates to a lboart_t in the
* KLCONFIG area. But since KLCONFIG does not use pointers, lboart_t
* is stored in terms of a nasid and a offset from start of KLCONFIG
* area on that nasid.
*/
typedef struct klport_s {
nasid_t port_nasid;
unsigned char port_flag;
klconf_off_t port_offset;
} klport_t;
typedef struct klcpu_s { /* CPU */
klinfo_t cpu_info;
unsigned short cpu_prid; /* Processor PRID value */
unsigned short cpu_fpirr; /* FPU IRR value */
unsigned short cpu_speed; /* Speed in MHZ */
unsigned short cpu_scachesz; /* secondary cache size in MB */
unsigned short cpu_scachespeed;/* secondary cache speed in MHz */
} klcpu_t ;
#define CPU_STRUCT_VERSION 2
typedef struct klhub_s { /* HUB */
klinfo_t hub_info;
unsigned int hub_flags; /* PCFG_HUB_xxx flags */
klport_t hub_port; /* hub is connected to this */
nic_t hub_box_nic; /* nic of containing box */
klconf_off_t hub_mfg_nic; /* MFG NIC string */
u64 hub_speed; /* Speed of hub in HZ */
} klhub_t ;
typedef struct klhub_uart_s { /* HUB */
klinfo_t hubuart_info;
unsigned int hubuart_flags; /* PCFG_HUB_xxx flags */
nic_t hubuart_box_nic; /* nic of containing box */
} klhub_uart_t ;
#define MEMORY_STRUCT_VERSION 2
typedef struct klmembnk_s { /* MEMORY BANK */
klinfo_t membnk_info;
short membnk_memsz; /* Total memory in megabytes */
short membnk_dimm_select; /* bank to physical addr mapping*/
short membnk_bnksz[MD_MEM_BANKS]; /* Memory bank sizes */
short membnk_attr;
} klmembnk_t ;
#define KLCONFIG_MEMBNK_SIZE(_info, _bank) \
((_info)->membnk_bnksz[(_bank)])
#define MEMBNK_PREMIUM 1
#define KLCONFIG_MEMBNK_PREMIUM(_info, _bank) \
((_info)->membnk_attr & (MEMBNK_PREMIUM << (_bank)))
#define MAX_SERIAL_NUM_SIZE 10
typedef struct klmod_serial_num_s {
klinfo_t snum_info;
union {
char snum_str[MAX_SERIAL_NUM_SIZE];
unsigned long long snum_int;
} snum;
} klmod_serial_num_t;
/* Macros needed to access serial number structure in lboard_t.
Hard coded values are necessary since we cannot treat
serial number struct as a component without losing compatibility
between prom versions. */
#define GET_SNUM_COMP(_l) ((klmod_serial_num_t *)\
KLCF_COMP(_l, _l->brd_numcompts))
#define MAX_XBOW_LINKS 16
typedef struct klxbow_s { /* XBOW */
klinfo_t xbow_info ;
klport_t xbow_port_info[MAX_XBOW_LINKS] ; /* Module number */
int xbow_master_hub_link;
/* type of brd connected+component struct ptr+flags */
} klxbow_t ;
#define MAX_PCI_SLOTS 8
typedef struct klpci_device_s {
s32 pci_device_id; /* 32 bits of vendor/device ID. */
s32 pci_device_pad; /* 32 bits of padding. */
} klpci_device_t;
#define BRIDGE_STRUCT_VERSION 2
typedef struct klbri_s { /* BRIDGE */
klinfo_t bri_info ;
unsigned char bri_eprominfo ; /* IO6prom connected to bridge */
unsigned char bri_bustype ; /* PCI/VME BUS bridge/GIO */
pci_t pci_specific ; /* PCI Board config info */
klpci_device_t bri_devices[MAX_PCI_DEVS] ; /* PCI IDs */
klconf_off_t bri_mfg_nic ;
} klbri_t ;
#define MAX_IOC3_TTY 2
typedef struct klioc3_s { /* IOC3 */
klinfo_t ioc3_info ;
unsigned char ioc3_ssram ; /* Info about ssram */
unsigned char ioc3_nvram ; /* Info about nvram */
klinfo_t ioc3_superio ; /* Info about superio */
klconf_off_t ioc3_tty_off ;
klinfo_t ioc3_enet ;
klconf_off_t ioc3_enet_off ;
klconf_off_t ioc3_kbd_off ;
} klioc3_t ;
#define MAX_VME_SLOTS 8
typedef struct klvmeb_s { /* VME BRIDGE - PCI CTLR */
klinfo_t vmeb_info ;
vmeb_t vmeb_specific ;
klconf_off_t vmeb_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */
} klvmeb_t ;
typedef struct klvmed_s { /* VME DEVICE - VME BOARD */
klinfo_t vmed_info ;
vmed_t vmed_specific ;
klconf_off_t vmed_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */
} klvmed_t ;
#define ROUTER_VECTOR_VERS 2
/* XXX - Don't we need the number of ports here?!? */
typedef struct klrou_s { /* ROUTER */
klinfo_t rou_info ;
unsigned int rou_flags ; /* PCFG_ROUTER_xxx flags */
nic_t rou_box_nic ; /* nic of the containing module */
klport_t rou_port[MAX_ROUTER_PORTS + 1] ; /* array index 1 to 6 */
klconf_off_t rou_mfg_nic ; /* MFG NIC string */
u64 rou_vector; /* vector from master node */
} klrou_t ;
/*
* Graphics Controller/Device
*
* (IP27/IO6) Prom versions 6.13 (and 6.5.1 kernels) and earlier
* used a couple different structures to store graphics information.
* For compatibility reasons, the newer data structure preserves some
* of the layout so that fields that are used in the old versions remain
* in the same place (with the same info). Determination of what version
* of this structure we have is done by checking the cookie field.
*/
#define KLGFX_COOKIE 0x0c0de000
typedef struct klgfx_s { /* GRAPHICS Device */
klinfo_t gfx_info;
klconf_off_t old_gndevs; /* for compatibility with older proms */
klconf_off_t old_gdoff0; /* for compatibility with older proms */
unsigned int cookie; /* for compatibility with older proms */
unsigned int moduleslot;
struct klgfx_s *gfx_next_pipe;
graphics_t gfx_specific;
klconf_off_t pad0; /* for compatibility with older proms */
klconf_off_t gfx_mfg_nic;
} klgfx_t;
typedef struct klxthd_s {
klinfo_t xthd_info ;
klconf_off_t xthd_mfg_nic ; /* MFG NIC string */
} klxthd_t ;
typedef struct kltpu_s { /* TPU board */
klinfo_t tpu_info ;
klconf_off_t tpu_mfg_nic ; /* MFG NIC string */
} kltpu_t ;
typedef struct klgsn_s { /* GSN board */
klinfo_t gsn_info ;
klconf_off_t gsn_mfg_nic ; /* MFG NIC string */
} klgsn_t ;
#define MAX_SCSI_DEVS 16
/*
* NOTE: THis is the max sized kl* structure and is used in klmalloc.c
* to allocate space of type COMPONENT. Make sure that if the size of
* any other component struct becomes more than this, then redefine
* that as the size to be klmalloced.
*/
typedef struct klscsi_s { /* SCSI Controller */
klinfo_t scsi_info ;
scsi_t scsi_specific ;
unsigned char scsi_numdevs ;
klconf_off_t scsi_devinfo[MAX_SCSI_DEVS] ;
} klscsi_t ;
typedef struct klscdev_s { /* SCSI device */
klinfo_t scdev_info ;
struct scsidisk_data *scdev_cfg ; /* driver fills up this */
} klscdev_t ;
typedef struct klttydev_s { /* TTY device */
klinfo_t ttydev_info ;
struct terminal_data *ttydev_cfg ; /* driver fills up this */
} klttydev_t ;
typedef struct klenetdev_s { /* ENET device */
klinfo_t enetdev_info ;
struct net_data *enetdev_cfg ; /* driver fills up this */
} klenetdev_t ;
typedef struct klkbddev_s { /* KBD device */
klinfo_t kbddev_info ;
struct keyboard_data *kbddev_cfg ; /* driver fills up this */
} klkbddev_t ;
typedef struct klmsdev_s { /* mouse device */
klinfo_t msdev_info ;
void *msdev_cfg ;
} klmsdev_t ;
#define MAX_FDDI_DEVS 10 /* XXX Is this true */
typedef struct klfddi_s { /* FDDI */
klinfo_t fddi_info ;
fddi_t fddi_specific ;
klconf_off_t fddi_devinfo[MAX_FDDI_DEVS] ;
} klfddi_t ;
typedef struct klmio_s { /* MIO */
klinfo_t mio_info ;
mio_t mio_specific ;
} klmio_t ;
typedef union klcomp_s {
klcpu_t kc_cpu;
klhub_t kc_hub;
klmembnk_t kc_mem;
klxbow_t kc_xbow;
klbri_t kc_bri;
klioc3_t kc_ioc3;
klvmeb_t kc_vmeb;
klvmed_t kc_vmed;
klrou_t kc_rou;
klgfx_t kc_gfx;
klscsi_t kc_scsi;
klscdev_t kc_scsi_dev;
klfddi_t kc_fddi;
klmio_t kc_mio;
klmod_serial_num_t kc_snum ;
} klcomp_t;
typedef union kldev_s { /* for device structure allocation */
klscdev_t kc_scsi_dev ;
klttydev_t kc_tty_dev ;
klenetdev_t kc_enet_dev ;
klkbddev_t kc_kbd_dev ;
} kldev_t ;
/* Data structure interface routines. TBD */
/* Include launch info in this file itself? TBD */
/*
* TBD - Can the ARCS and device driver related info also be included in the
* KLCONFIG area. On the IO4PROM, prom device driver info is part of cfgnode_t
* structure, viz private to the IO4prom.
*/
/*
* TBD - Allocation issues.
*
* Do we need to Mark off sepatate heaps for lboard_t, rboard_t, component,
* errinfo and allocate from them, or have a single heap and allocate all
* structures from it. Debug is easier in the former method since we can
* dump all similar structs in one command, but there will be lots of holes,
* in memory and max limits are needed for number of structures.
* Another way to make it organized, is to have a union of all components
* and allocate a aligned chunk of memory greater than the biggest
* component.
*/
typedef union {
lboard_t *lbinfo ;
} biptr_t ;
#define BRI_PER_XBOW 6
#define PCI_PER_BRI 8
#define DEV_PER_PCI 16
/* Virtual dipswitch values (starting from switch "7"): */
#define VDS_NOGFX 0x8000 /* Don't enable gfx and autoboot */
#define VDS_NOMP 0x100 /* Don't start slave processors */
#define VDS_MANUMODE 0x80 /* Manufacturing mode */
#define VDS_NOARB 0x40 /* No bootmaster arbitration */
#define VDS_PODMODE 0x20 /* Go straight to POD mode */
#define VDS_NO_DIAGS 0x10 /* Don't run any diags after BM arb */
#define VDS_DEFAULTS 0x08 /* Use default environment values */
#define VDS_NOMEMCLEAR 0x04 /* Don't run mem cfg code */
#define VDS_2ND_IO4 0x02 /* Boot from the second IO4 */
#define VDS_DEBUG_PROM 0x01 /* Print PROM debugging messages */
/* external declarations of Linux kernel functions. */
extern lboard_t *find_lboard(lboard_t *start, unsigned char type);
extern klinfo_t *find_component(lboard_t *brd, klinfo_t *kli, unsigned char type);
extern klinfo_t *find_first_component(lboard_t *brd, unsigned char type);
extern klcpu_t *nasid_slice_to_cpuinfo(nasid_t, int);
extern lboard_t *find_lboard_class(lboard_t *start, unsigned char brd_class);
extern klcpu_t *sn_get_cpuinfo(cpuid_t cpu);
#endif /* _ASM_SN_KLCONFIG_H */
Reference in New Issue View Git Blame Copy Permalink