OpenCloudOS-Kernel/net/rxrpc/recvmsg.c

713 lines
19 KiB
C

/* RxRPC recvmsg() implementation
*
* Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/net.h>
#include <linux/skbuff.h>
#include <linux/export.h>
#include <linux/sched/signal.h>
#include <net/sock.h>
#include <net/af_rxrpc.h>
#include "ar-internal.h"
/*
* Post a call for attention by the socket or kernel service. Further
* notifications are suppressed by putting recvmsg_link on a dummy queue.
*/
void rxrpc_notify_socket(struct rxrpc_call *call)
{
struct rxrpc_sock *rx;
struct sock *sk;
_enter("%d", call->debug_id);
if (!list_empty(&call->recvmsg_link))
return;
rcu_read_lock();
rx = rcu_dereference(call->socket);
sk = &rx->sk;
if (rx && sk->sk_state < RXRPC_CLOSE) {
if (call->notify_rx) {
spin_lock_bh(&call->notify_lock);
call->notify_rx(sk, call, call->user_call_ID);
spin_unlock_bh(&call->notify_lock);
} else {
write_lock_bh(&rx->recvmsg_lock);
if (list_empty(&call->recvmsg_link)) {
rxrpc_get_call(call, rxrpc_call_got);
list_add_tail(&call->recvmsg_link, &rx->recvmsg_q);
}
write_unlock_bh(&rx->recvmsg_lock);
if (!sock_flag(sk, SOCK_DEAD)) {
_debug("call %ps", sk->sk_data_ready);
sk->sk_data_ready(sk);
}
}
}
rcu_read_unlock();
_leave("");
}
/*
* Pass a call terminating message to userspace.
*/
static int rxrpc_recvmsg_term(struct rxrpc_call *call, struct msghdr *msg)
{
u32 tmp = 0;
int ret;
switch (call->completion) {
case RXRPC_CALL_SUCCEEDED:
ret = 0;
if (rxrpc_is_service_call(call))
ret = put_cmsg(msg, SOL_RXRPC, RXRPC_ACK, 0, &tmp);
break;
case RXRPC_CALL_REMOTELY_ABORTED:
tmp = call->abort_code;
ret = put_cmsg(msg, SOL_RXRPC, RXRPC_ABORT, 4, &tmp);
break;
case RXRPC_CALL_LOCALLY_ABORTED:
tmp = call->abort_code;
ret = put_cmsg(msg, SOL_RXRPC, RXRPC_ABORT, 4, &tmp);
break;
case RXRPC_CALL_NETWORK_ERROR:
tmp = -call->error;
ret = put_cmsg(msg, SOL_RXRPC, RXRPC_NET_ERROR, 4, &tmp);
break;
case RXRPC_CALL_LOCAL_ERROR:
tmp = -call->error;
ret = put_cmsg(msg, SOL_RXRPC, RXRPC_LOCAL_ERROR, 4, &tmp);
break;
default:
pr_err("Invalid terminal call state %u\n", call->state);
BUG();
break;
}
trace_rxrpc_recvmsg(call, rxrpc_recvmsg_terminal, call->rx_hard_ack,
call->rx_pkt_offset, call->rx_pkt_len, ret);
return ret;
}
/*
* Pass back notification of a new call. The call is added to the
* to-be-accepted list. This means that the next call to be accepted might not
* be the last call seen awaiting acceptance, but unless we leave this on the
* front of the queue and block all other messages until someone gives us a
* user_ID for it, there's not a lot we can do.
*/
static int rxrpc_recvmsg_new_call(struct rxrpc_sock *rx,
struct rxrpc_call *call,
struct msghdr *msg, int flags)
{
int tmp = 0, ret;
ret = put_cmsg(msg, SOL_RXRPC, RXRPC_NEW_CALL, 0, &tmp);
if (ret == 0 && !(flags & MSG_PEEK)) {
_debug("to be accepted");
write_lock_bh(&rx->recvmsg_lock);
list_del_init(&call->recvmsg_link);
write_unlock_bh(&rx->recvmsg_lock);
rxrpc_get_call(call, rxrpc_call_got);
write_lock(&rx->call_lock);
list_add_tail(&call->accept_link, &rx->to_be_accepted);
write_unlock(&rx->call_lock);
}
trace_rxrpc_recvmsg(call, rxrpc_recvmsg_to_be_accepted, 1, 0, 0, ret);
return ret;
}
/*
* End the packet reception phase.
*/
static void rxrpc_end_rx_phase(struct rxrpc_call *call, rxrpc_serial_t serial)
{
_enter("%d,%s", call->debug_id, rxrpc_call_states[call->state]);
trace_rxrpc_receive(call, rxrpc_receive_end, 0, call->rx_top);
ASSERTCMP(call->rx_hard_ack, ==, call->rx_top);
#if 0 // TODO: May want to transmit final ACK under some circumstances anyway
if (call->state == RXRPC_CALL_CLIENT_RECV_REPLY) {
rxrpc_propose_ACK(call, RXRPC_ACK_IDLE, 0, serial, true, false,
rxrpc_propose_ack_terminal_ack);
rxrpc_send_ack_packet(call, false, NULL);
}
#endif
write_lock_bh(&call->state_lock);
switch (call->state) {
case RXRPC_CALL_CLIENT_RECV_REPLY:
__rxrpc_call_completed(call);
write_unlock_bh(&call->state_lock);
break;
case RXRPC_CALL_SERVER_RECV_REQUEST:
call->tx_phase = true;
call->state = RXRPC_CALL_SERVER_ACK_REQUEST;
call->expect_req_by = jiffies + MAX_JIFFY_OFFSET;
write_unlock_bh(&call->state_lock);
rxrpc_propose_ACK(call, RXRPC_ACK_DELAY, 0, serial, false, true,
rxrpc_propose_ack_processing_op);
break;
default:
write_unlock_bh(&call->state_lock);
break;
}
}
/*
* Discard a packet we've used up and advance the Rx window by one.
*/
static void rxrpc_rotate_rx_window(struct rxrpc_call *call)
{
struct rxrpc_skb_priv *sp;
struct sk_buff *skb;
rxrpc_serial_t serial;
rxrpc_seq_t hard_ack, top;
u8 flags;
int ix;
_enter("%d", call->debug_id);
hard_ack = call->rx_hard_ack;
top = smp_load_acquire(&call->rx_top);
ASSERT(before(hard_ack, top));
hard_ack++;
ix = hard_ack & RXRPC_RXTX_BUFF_MASK;
skb = call->rxtx_buffer[ix];
rxrpc_see_skb(skb, rxrpc_skb_rx_rotated);
sp = rxrpc_skb(skb);
flags = sp->hdr.flags;
serial = sp->hdr.serial;
if (call->rxtx_annotations[ix] & RXRPC_RX_ANNO_JUMBO)
serial += (call->rxtx_annotations[ix] & RXRPC_RX_ANNO_JUMBO) - 1;
call->rxtx_buffer[ix] = NULL;
call->rxtx_annotations[ix] = 0;
/* Barrier against rxrpc_input_data(). */
smp_store_release(&call->rx_hard_ack, hard_ack);
rxrpc_free_skb(skb, rxrpc_skb_rx_freed);
_debug("%u,%u,%02x", hard_ack, top, flags);
trace_rxrpc_receive(call, rxrpc_receive_rotate, serial, hard_ack);
if (flags & RXRPC_LAST_PACKET) {
rxrpc_end_rx_phase(call, serial);
} else {
/* Check to see if there's an ACK that needs sending. */
if (after_eq(hard_ack, call->ackr_consumed + 2) ||
after_eq(top, call->ackr_seen + 2) ||
(hard_ack == top && after(hard_ack, call->ackr_consumed)))
rxrpc_propose_ACK(call, RXRPC_ACK_DELAY, 0, serial,
true, true,
rxrpc_propose_ack_rotate_rx);
if (call->ackr_reason && call->ackr_reason != RXRPC_ACK_DELAY)
rxrpc_send_ack_packet(call, false, NULL);
}
}
/*
* Decrypt and verify a (sub)packet. The packet's length may be changed due to
* padding, but if this is the case, the packet length will be resident in the
* socket buffer. Note that we can't modify the master skb info as the skb may
* be the home to multiple subpackets.
*/
static int rxrpc_verify_packet(struct rxrpc_call *call, struct sk_buff *skb,
u8 annotation,
unsigned int offset, unsigned int len)
{
struct rxrpc_skb_priv *sp = rxrpc_skb(skb);
rxrpc_seq_t seq = sp->hdr.seq;
u16 cksum = sp->hdr.cksum;
_enter("");
/* For all but the head jumbo subpacket, the security checksum is in a
* jumbo header immediately prior to the data.
*/
if ((annotation & RXRPC_RX_ANNO_JUMBO) > 1) {
__be16 tmp;
if (skb_copy_bits(skb, offset - 2, &tmp, 2) < 0)
BUG();
cksum = ntohs(tmp);
seq += (annotation & RXRPC_RX_ANNO_JUMBO) - 1;
}
return call->conn->security->verify_packet(call, skb, offset, len,
seq, cksum);
}
/*
* Locate the data within a packet. This is complicated by:
*
* (1) An skb may contain a jumbo packet - so we have to find the appropriate
* subpacket.
*
* (2) The (sub)packets may be encrypted and, if so, the encrypted portion
* contains an extra header which includes the true length of the data,
* excluding any encrypted padding.
*/
static int rxrpc_locate_data(struct rxrpc_call *call, struct sk_buff *skb,
u8 *_annotation,
unsigned int *_offset, unsigned int *_len)
{
unsigned int offset = sizeof(struct rxrpc_wire_header);
unsigned int len = *_len;
int ret;
u8 annotation = *_annotation;
/* Locate the subpacket */
len = skb->len - offset;
if ((annotation & RXRPC_RX_ANNO_JUMBO) > 0) {
offset += (((annotation & RXRPC_RX_ANNO_JUMBO) - 1) *
RXRPC_JUMBO_SUBPKTLEN);
len = (annotation & RXRPC_RX_ANNO_JLAST) ?
skb->len - offset : RXRPC_JUMBO_SUBPKTLEN;
}
if (!(annotation & RXRPC_RX_ANNO_VERIFIED)) {
ret = rxrpc_verify_packet(call, skb, annotation, offset, len);
if (ret < 0)
return ret;
*_annotation |= RXRPC_RX_ANNO_VERIFIED;
}
*_offset = offset;
*_len = len;
call->conn->security->locate_data(call, skb, _offset, _len);
return 0;
}
/*
* Deliver messages to a call. This keeps processing packets until the buffer
* is filled and we find either more DATA (returns 0) or the end of the DATA
* (returns 1). If more packets are required, it returns -EAGAIN.
*/
static int rxrpc_recvmsg_data(struct socket *sock, struct rxrpc_call *call,
struct msghdr *msg, struct iov_iter *iter,
size_t len, int flags, size_t *_offset)
{
struct rxrpc_skb_priv *sp;
struct sk_buff *skb;
rxrpc_seq_t hard_ack, top, seq;
size_t remain;
bool last;
unsigned int rx_pkt_offset, rx_pkt_len;
int ix, copy, ret = -EAGAIN, ret2;
rx_pkt_offset = call->rx_pkt_offset;
rx_pkt_len = call->rx_pkt_len;
if (call->state >= RXRPC_CALL_SERVER_ACK_REQUEST) {
seq = call->rx_hard_ack;
ret = 1;
goto done;
}
/* Barriers against rxrpc_input_data(). */
hard_ack = call->rx_hard_ack;
seq = hard_ack + 1;
while (top = smp_load_acquire(&call->rx_top),
before_eq(seq, top)
) {
ix = seq & RXRPC_RXTX_BUFF_MASK;
skb = call->rxtx_buffer[ix];
if (!skb) {
trace_rxrpc_recvmsg(call, rxrpc_recvmsg_hole, seq,
rx_pkt_offset, rx_pkt_len, 0);
break;
}
smp_rmb();
rxrpc_see_skb(skb, rxrpc_skb_rx_seen);
sp = rxrpc_skb(skb);
if (!(flags & MSG_PEEK))
trace_rxrpc_receive(call, rxrpc_receive_front,
sp->hdr.serial, seq);
if (msg)
sock_recv_timestamp(msg, sock->sk, skb);
if (rx_pkt_offset == 0) {
ret2 = rxrpc_locate_data(call, skb,
&call->rxtx_annotations[ix],
&rx_pkt_offset, &rx_pkt_len);
trace_rxrpc_recvmsg(call, rxrpc_recvmsg_next, seq,
rx_pkt_offset, rx_pkt_len, ret2);
if (ret2 < 0) {
ret = ret2;
goto out;
}
} else {
trace_rxrpc_recvmsg(call, rxrpc_recvmsg_cont, seq,
rx_pkt_offset, rx_pkt_len, 0);
}
/* We have to handle short, empty and used-up DATA packets. */
remain = len - *_offset;
copy = rx_pkt_len;
if (copy > remain)
copy = remain;
if (copy > 0) {
ret2 = skb_copy_datagram_iter(skb, rx_pkt_offset, iter,
copy);
if (ret2 < 0) {
ret = ret2;
goto out;
}
/* handle piecemeal consumption of data packets */
rx_pkt_offset += copy;
rx_pkt_len -= copy;
*_offset += copy;
}
if (rx_pkt_len > 0) {
trace_rxrpc_recvmsg(call, rxrpc_recvmsg_full, seq,
rx_pkt_offset, rx_pkt_len, 0);
ASSERTCMP(*_offset, ==, len);
ret = 0;
break;
}
/* The whole packet has been transferred. */
last = sp->hdr.flags & RXRPC_LAST_PACKET;
if (!(flags & MSG_PEEK))
rxrpc_rotate_rx_window(call);
rx_pkt_offset = 0;
rx_pkt_len = 0;
if (last) {
ASSERTCMP(seq, ==, READ_ONCE(call->rx_top));
ret = 1;
goto out;
}
seq++;
}
out:
if (!(flags & MSG_PEEK)) {
call->rx_pkt_offset = rx_pkt_offset;
call->rx_pkt_len = rx_pkt_len;
}
done:
trace_rxrpc_recvmsg(call, rxrpc_recvmsg_data_return, seq,
rx_pkt_offset, rx_pkt_len, ret);
return ret;
}
/*
* Receive a message from an RxRPC socket
* - we need to be careful about two or more threads calling recvmsg
* simultaneously
*/
int rxrpc_recvmsg(struct socket *sock, struct msghdr *msg, size_t len,
int flags)
{
struct rxrpc_call *call;
struct rxrpc_sock *rx = rxrpc_sk(sock->sk);
struct list_head *l;
size_t copied = 0;
long timeo;
int ret;
DEFINE_WAIT(wait);
trace_rxrpc_recvmsg(NULL, rxrpc_recvmsg_enter, 0, 0, 0, 0);
if (flags & (MSG_OOB | MSG_TRUNC))
return -EOPNOTSUPP;
timeo = sock_rcvtimeo(&rx->sk, flags & MSG_DONTWAIT);
try_again:
lock_sock(&rx->sk);
/* Return immediately if a client socket has no outstanding calls */
if (RB_EMPTY_ROOT(&rx->calls) &&
list_empty(&rx->recvmsg_q) &&
rx->sk.sk_state != RXRPC_SERVER_LISTENING) {
release_sock(&rx->sk);
return -ENODATA;
}
if (list_empty(&rx->recvmsg_q)) {
ret = -EWOULDBLOCK;
if (timeo == 0) {
call = NULL;
goto error_no_call;
}
release_sock(&rx->sk);
/* Wait for something to happen */
prepare_to_wait_exclusive(sk_sleep(&rx->sk), &wait,
TASK_INTERRUPTIBLE);
ret = sock_error(&rx->sk);
if (ret)
goto wait_error;
if (list_empty(&rx->recvmsg_q)) {
if (signal_pending(current))
goto wait_interrupted;
trace_rxrpc_recvmsg(NULL, rxrpc_recvmsg_wait,
0, 0, 0, 0);
timeo = schedule_timeout(timeo);
}
finish_wait(sk_sleep(&rx->sk), &wait);
goto try_again;
}
/* Find the next call and dequeue it if we're not just peeking. If we
* do dequeue it, that comes with a ref that we will need to release.
*/
write_lock_bh(&rx->recvmsg_lock);
l = rx->recvmsg_q.next;
call = list_entry(l, struct rxrpc_call, recvmsg_link);
if (!(flags & MSG_PEEK))
list_del_init(&call->recvmsg_link);
else
rxrpc_get_call(call, rxrpc_call_got);
write_unlock_bh(&rx->recvmsg_lock);
trace_rxrpc_recvmsg(call, rxrpc_recvmsg_dequeue, 0, 0, 0, 0);
/* We're going to drop the socket lock, so we need to lock the call
* against interference by sendmsg.
*/
if (!mutex_trylock(&call->user_mutex)) {
ret = -EWOULDBLOCK;
if (flags & MSG_DONTWAIT)
goto error_requeue_call;
ret = -ERESTARTSYS;
if (mutex_lock_interruptible(&call->user_mutex) < 0)
goto error_requeue_call;
}
release_sock(&rx->sk);
if (test_bit(RXRPC_CALL_RELEASED, &call->flags))
BUG();
if (test_bit(RXRPC_CALL_HAS_USERID, &call->flags)) {
if (flags & MSG_CMSG_COMPAT) {
unsigned int id32 = call->user_call_ID;
ret = put_cmsg(msg, SOL_RXRPC, RXRPC_USER_CALL_ID,
sizeof(unsigned int), &id32);
} else {
ret = put_cmsg(msg, SOL_RXRPC, RXRPC_USER_CALL_ID,
sizeof(unsigned long),
&call->user_call_ID);
}
if (ret < 0)
goto error_unlock_call;
}
if (msg->msg_name) {
struct sockaddr_rxrpc *srx = msg->msg_name;
size_t len = sizeof(call->peer->srx);
memcpy(msg->msg_name, &call->peer->srx, len);
srx->srx_service = call->service_id;
msg->msg_namelen = len;
}
switch (READ_ONCE(call->state)) {
case RXRPC_CALL_SERVER_ACCEPTING:
ret = rxrpc_recvmsg_new_call(rx, call, msg, flags);
break;
case RXRPC_CALL_CLIENT_RECV_REPLY:
case RXRPC_CALL_SERVER_RECV_REQUEST:
case RXRPC_CALL_SERVER_ACK_REQUEST:
ret = rxrpc_recvmsg_data(sock, call, msg, &msg->msg_iter, len,
flags, &copied);
if (ret == -EAGAIN)
ret = 0;
if (after(call->rx_top, call->rx_hard_ack) &&
call->rxtx_buffer[(call->rx_hard_ack + 1) & RXRPC_RXTX_BUFF_MASK])
rxrpc_notify_socket(call);
break;
default:
ret = 0;
break;
}
if (ret < 0)
goto error_unlock_call;
if (call->state == RXRPC_CALL_COMPLETE) {
ret = rxrpc_recvmsg_term(call, msg);
if (ret < 0)
goto error_unlock_call;
if (!(flags & MSG_PEEK))
rxrpc_release_call(rx, call);
msg->msg_flags |= MSG_EOR;
ret = 1;
}
if (ret == 0)
msg->msg_flags |= MSG_MORE;
else
msg->msg_flags &= ~MSG_MORE;
ret = copied;
error_unlock_call:
mutex_unlock(&call->user_mutex);
rxrpc_put_call(call, rxrpc_call_put);
trace_rxrpc_recvmsg(call, rxrpc_recvmsg_return, 0, 0, 0, ret);
return ret;
error_requeue_call:
if (!(flags & MSG_PEEK)) {
write_lock_bh(&rx->recvmsg_lock);
list_add(&call->recvmsg_link, &rx->recvmsg_q);
write_unlock_bh(&rx->recvmsg_lock);
trace_rxrpc_recvmsg(call, rxrpc_recvmsg_requeue, 0, 0, 0, 0);
} else {
rxrpc_put_call(call, rxrpc_call_put);
}
error_no_call:
release_sock(&rx->sk);
trace_rxrpc_recvmsg(call, rxrpc_recvmsg_return, 0, 0, 0, ret);
return ret;
wait_interrupted:
ret = sock_intr_errno(timeo);
wait_error:
finish_wait(sk_sleep(&rx->sk), &wait);
call = NULL;
goto error_no_call;
}
/**
* rxrpc_kernel_recv_data - Allow a kernel service to receive data/info
* @sock: The socket that the call exists on
* @call: The call to send data through
* @buf: The buffer to receive into
* @size: The size of the buffer, including data already read
* @_offset: The running offset into the buffer.
* @want_more: True if more data is expected to be read
* @_abort: Where the abort code is stored if -ECONNABORTED is returned
* @_service: Where to store the actual service ID (may be upgraded)
*
* Allow a kernel service to receive data and pick up information about the
* state of a call. Returns 0 if got what was asked for and there's more
* available, 1 if we got what was asked for and we're at the end of the data
* and -EAGAIN if we need more data.
*
* Note that we may return -EAGAIN to drain empty packets at the end of the
* data, even if we've already copied over the requested data.
*
* This function adds the amount it transfers to *_offset, so this should be
* precleared as appropriate. Note that the amount remaining in the buffer is
* taken to be size - *_offset.
*
* *_abort should also be initialised to 0.
*/
int rxrpc_kernel_recv_data(struct socket *sock, struct rxrpc_call *call,
void *buf, size_t size, size_t *_offset,
bool want_more, u32 *_abort, u16 *_service)
{
struct iov_iter iter;
struct kvec iov;
int ret;
_enter("{%d,%s},%zu/%zu,%d",
call->debug_id, rxrpc_call_states[call->state],
*_offset, size, want_more);
ASSERTCMP(*_offset, <=, size);
ASSERTCMP(call->state, !=, RXRPC_CALL_SERVER_ACCEPTING);
iov.iov_base = buf + *_offset;
iov.iov_len = size - *_offset;
iov_iter_kvec(&iter, ITER_KVEC | READ, &iov, 1, size - *_offset);
mutex_lock(&call->user_mutex);
switch (READ_ONCE(call->state)) {
case RXRPC_CALL_CLIENT_RECV_REPLY:
case RXRPC_CALL_SERVER_RECV_REQUEST:
case RXRPC_CALL_SERVER_ACK_REQUEST:
ret = rxrpc_recvmsg_data(sock, call, NULL, &iter, size, 0,
_offset);
if (ret < 0)
goto out;
/* We can only reach here with a partially full buffer if we
* have reached the end of the data. We must otherwise have a
* full buffer or have been given -EAGAIN.
*/
if (ret == 1) {
if (*_offset < size)
goto short_data;
if (!want_more)
goto read_phase_complete;
ret = 0;
goto out;
}
if (!want_more)
goto excess_data;
goto out;
case RXRPC_CALL_COMPLETE:
goto call_complete;
default:
ret = -EINPROGRESS;
goto out;
}
read_phase_complete:
ret = 1;
out:
if (_service)
*_service = call->service_id;
mutex_unlock(&call->user_mutex);
_leave(" = %d [%zu,%d]", ret, *_offset, *_abort);
return ret;
short_data:
trace_rxrpc_rx_eproto(call, 0, tracepoint_string("short_data"));
ret = -EBADMSG;
goto out;
excess_data:
trace_rxrpc_rx_eproto(call, 0, tracepoint_string("excess_data"));
ret = -EMSGSIZE;
goto out;
call_complete:
*_abort = call->abort_code;
ret = call->error;
if (call->completion == RXRPC_CALL_SUCCEEDED) {
ret = 1;
if (size > 0)
ret = -ECONNRESET;
}
goto out;
}
EXPORT_SYMBOL(rxrpc_kernel_recv_data);