44 lines
1.1 KiB
Plaintext
44 lines
1.1 KiB
Plaintext
SPI-GPIO devicetree bindings
|
|
|
|
This represents a group of 3-n GPIO lines used for bit-banged SPI on dedicated
|
|
GPIO lines.
|
|
|
|
Required properties:
|
|
|
|
- compatible: should be set to "spi-gpio"
|
|
- #address-cells: should be set to <0x1>
|
|
- ranges
|
|
- sck-gpios: GPIO spec for the SCK line to use
|
|
- miso-gpios: GPIO spec for the MISO line to use
|
|
- mosi-gpios: GPIO spec for the MOSI line to use
|
|
- cs-gpios: GPIOs to use for chipselect lines.
|
|
Not needed if num-chipselects = <0>.
|
|
- num-chipselects: Number of chipselect lines. Should be <0> if a single device
|
|
with no chip select is connected.
|
|
|
|
Deprecated bindings:
|
|
|
|
These legacy GPIO line bindings can alternatively be used to define the
|
|
GPIO lines used, they should not be used in new device trees.
|
|
|
|
- gpio-sck: GPIO spec for the SCK line to use
|
|
- gpio-miso: GPIO spec for the MISO line to use
|
|
- gpio-mosi: GPIO spec for the MOSI line to use
|
|
|
|
Example:
|
|
|
|
spi {
|
|
compatible = "spi-gpio";
|
|
#address-cells = <0x1>;
|
|
ranges;
|
|
|
|
sck-gpios = <&gpio 95 0>;
|
|
miso-gpios = <&gpio 98 0>;
|
|
mosi-gpios = <&gpio 97 0>;
|
|
cs-gpios = <&gpio 125 0>;
|
|
num-chipselects = <1>;
|
|
|
|
/* clients */
|
|
};
|
|
|