1261 lines
37 KiB
C
1261 lines
37 KiB
C
/******************************************************************************
|
|
*
|
|
* GPL LICENSE SUMMARY
|
|
*
|
|
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
|
|
* USA
|
|
*
|
|
* The full GNU General Public License is included in this distribution
|
|
* in the file called LICENSE.GPL.
|
|
*
|
|
* Contact Information:
|
|
* Intel Linux Wireless <ilw@linux.intel.com>
|
|
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
*
|
|
*****************************************************************************/
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/sched.h>
|
|
|
|
#include "iwl-dev.h"
|
|
#include "iwl-core.h"
|
|
#include "iwl-io.h"
|
|
#include "iwl-helpers.h"
|
|
#include "iwl-4965-hw.h"
|
|
#include "iwl-4965.h"
|
|
#include "iwl-sta.h"
|
|
|
|
void iwl4965_check_abort_status(struct iwl_priv *priv,
|
|
u8 frame_count, u32 status)
|
|
{
|
|
if (frame_count == 1 && status == TX_STATUS_FAIL_RFKILL_FLUSH) {
|
|
IWL_ERR(priv, "Tx flush command to flush out all frames\n");
|
|
if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
|
|
queue_work(priv->workqueue, &priv->tx_flush);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* EEPROM
|
|
*/
|
|
struct iwl_mod_params iwl4965_mod_params = {
|
|
.amsdu_size_8K = 1,
|
|
.restart_fw = 1,
|
|
/* the rest are 0 by default */
|
|
};
|
|
|
|
void iwl4965_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
|
|
{
|
|
unsigned long flags;
|
|
int i;
|
|
spin_lock_irqsave(&rxq->lock, flags);
|
|
INIT_LIST_HEAD(&rxq->rx_free);
|
|
INIT_LIST_HEAD(&rxq->rx_used);
|
|
/* Fill the rx_used queue with _all_ of the Rx buffers */
|
|
for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
|
|
/* In the reset function, these buffers may have been allocated
|
|
* to an SKB, so we need to unmap and free potential storage */
|
|
if (rxq->pool[i].page != NULL) {
|
|
pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
|
|
PAGE_SIZE << priv->hw_params.rx_page_order,
|
|
PCI_DMA_FROMDEVICE);
|
|
__iwl_legacy_free_pages(priv, rxq->pool[i].page);
|
|
rxq->pool[i].page = NULL;
|
|
}
|
|
list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
|
|
}
|
|
|
|
for (i = 0; i < RX_QUEUE_SIZE; i++)
|
|
rxq->queue[i] = NULL;
|
|
|
|
/* Set us so that we have processed and used all buffers, but have
|
|
* not restocked the Rx queue with fresh buffers */
|
|
rxq->read = rxq->write = 0;
|
|
rxq->write_actual = 0;
|
|
rxq->free_count = 0;
|
|
spin_unlock_irqrestore(&rxq->lock, flags);
|
|
}
|
|
|
|
int iwl4965_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
|
|
{
|
|
u32 rb_size;
|
|
const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */
|
|
u32 rb_timeout = 0;
|
|
|
|
if (priv->cfg->mod_params->amsdu_size_8K)
|
|
rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K;
|
|
else
|
|
rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K;
|
|
|
|
/* Stop Rx DMA */
|
|
iwl_legacy_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
|
|
|
|
/* Reset driver's Rx queue write index */
|
|
iwl_legacy_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0);
|
|
|
|
/* Tell device where to find RBD circular buffer in DRAM */
|
|
iwl_legacy_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_BASE_REG,
|
|
(u32)(rxq->bd_dma >> 8));
|
|
|
|
/* Tell device where in DRAM to update its Rx status */
|
|
iwl_legacy_write_direct32(priv, FH_RSCSR_CHNL0_STTS_WPTR_REG,
|
|
rxq->rb_stts_dma >> 4);
|
|
|
|
/* Enable Rx DMA
|
|
* Direct rx interrupts to hosts
|
|
* Rx buffer size 4 or 8k
|
|
* RB timeout 0x10
|
|
* 256 RBDs
|
|
*/
|
|
iwl_legacy_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG,
|
|
FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL |
|
|
FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL |
|
|
FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK |
|
|
rb_size|
|
|
(rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)|
|
|
(rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS));
|
|
|
|
/* Set interrupt coalescing timer to default (2048 usecs) */
|
|
iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_TIMEOUT_DEF);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void iwl4965_set_pwr_vmain(struct iwl_priv *priv)
|
|
{
|
|
/*
|
|
* (for documentation purposes)
|
|
* to set power to V_AUX, do:
|
|
|
|
if (pci_pme_capable(priv->pci_dev, PCI_D3cold))
|
|
iwl_legacy_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
|
|
APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
|
|
~APMG_PS_CTRL_MSK_PWR_SRC);
|
|
*/
|
|
|
|
iwl_legacy_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
|
|
APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
|
|
~APMG_PS_CTRL_MSK_PWR_SRC);
|
|
}
|
|
|
|
int iwl4965_hw_nic_init(struct iwl_priv *priv)
|
|
{
|
|
unsigned long flags;
|
|
struct iwl_rx_queue *rxq = &priv->rxq;
|
|
int ret;
|
|
|
|
/* nic_init */
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
priv->cfg->ops->lib->apm_ops.init(priv);
|
|
|
|
/* Set interrupt coalescing calibration timer to default (512 usecs) */
|
|
iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_CALIB_TIMEOUT_DEF);
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
iwl4965_set_pwr_vmain(priv);
|
|
|
|
priv->cfg->ops->lib->apm_ops.config(priv);
|
|
|
|
/* Allocate the RX queue, or reset if it is already allocated */
|
|
if (!rxq->bd) {
|
|
ret = iwl_legacy_rx_queue_alloc(priv);
|
|
if (ret) {
|
|
IWL_ERR(priv, "Unable to initialize Rx queue\n");
|
|
return -ENOMEM;
|
|
}
|
|
} else
|
|
iwl4965_rx_queue_reset(priv, rxq);
|
|
|
|
iwl4965_rx_replenish(priv);
|
|
|
|
iwl4965_rx_init(priv, rxq);
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
rxq->need_update = 1;
|
|
iwl_legacy_rx_queue_update_write_ptr(priv, rxq);
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
/* Allocate or reset and init all Tx and Command queues */
|
|
if (!priv->txq) {
|
|
ret = iwl4965_txq_ctx_alloc(priv);
|
|
if (ret)
|
|
return ret;
|
|
} else
|
|
iwl4965_txq_ctx_reset(priv);
|
|
|
|
set_bit(STATUS_INIT, &priv->status);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
|
|
*/
|
|
static inline __le32 iwl4965_dma_addr2rbd_ptr(struct iwl_priv *priv,
|
|
dma_addr_t dma_addr)
|
|
{
|
|
return cpu_to_le32((u32)(dma_addr >> 8));
|
|
}
|
|
|
|
/**
|
|
* iwl4965_rx_queue_restock - refill RX queue from pre-allocated pool
|
|
*
|
|
* If there are slots in the RX queue that need to be restocked,
|
|
* and we have free pre-allocated buffers, fill the ranks as much
|
|
* as we can, pulling from rx_free.
|
|
*
|
|
* This moves the 'write' index forward to catch up with 'processed', and
|
|
* also updates the memory address in the firmware to reference the new
|
|
* target buffer.
|
|
*/
|
|
void iwl4965_rx_queue_restock(struct iwl_priv *priv)
|
|
{
|
|
struct iwl_rx_queue *rxq = &priv->rxq;
|
|
struct list_head *element;
|
|
struct iwl_rx_mem_buffer *rxb;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&rxq->lock, flags);
|
|
while ((iwl_legacy_rx_queue_space(rxq) > 0) && (rxq->free_count)) {
|
|
/* The overwritten rxb must be a used one */
|
|
rxb = rxq->queue[rxq->write];
|
|
BUG_ON(rxb && rxb->page);
|
|
|
|
/* Get next free Rx buffer, remove from free list */
|
|
element = rxq->rx_free.next;
|
|
rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
|
|
list_del(element);
|
|
|
|
/* Point to Rx buffer via next RBD in circular buffer */
|
|
rxq->bd[rxq->write] = iwl4965_dma_addr2rbd_ptr(priv,
|
|
rxb->page_dma);
|
|
rxq->queue[rxq->write] = rxb;
|
|
rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
|
|
rxq->free_count--;
|
|
}
|
|
spin_unlock_irqrestore(&rxq->lock, flags);
|
|
/* If the pre-allocated buffer pool is dropping low, schedule to
|
|
* refill it */
|
|
if (rxq->free_count <= RX_LOW_WATERMARK)
|
|
queue_work(priv->workqueue, &priv->rx_replenish);
|
|
|
|
|
|
/* If we've added more space for the firmware to place data, tell it.
|
|
* Increment device's write pointer in multiples of 8. */
|
|
if (rxq->write_actual != (rxq->write & ~0x7)) {
|
|
spin_lock_irqsave(&rxq->lock, flags);
|
|
rxq->need_update = 1;
|
|
spin_unlock_irqrestore(&rxq->lock, flags);
|
|
iwl_legacy_rx_queue_update_write_ptr(priv, rxq);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* iwl4965_rx_replenish - Move all used packet from rx_used to rx_free
|
|
*
|
|
* When moving to rx_free an SKB is allocated for the slot.
|
|
*
|
|
* Also restock the Rx queue via iwl_rx_queue_restock.
|
|
* This is called as a scheduled work item (except for during initialization)
|
|
*/
|
|
static void iwl4965_rx_allocate(struct iwl_priv *priv, gfp_t priority)
|
|
{
|
|
struct iwl_rx_queue *rxq = &priv->rxq;
|
|
struct list_head *element;
|
|
struct iwl_rx_mem_buffer *rxb;
|
|
struct page *page;
|
|
unsigned long flags;
|
|
gfp_t gfp_mask = priority;
|
|
|
|
while (1) {
|
|
spin_lock_irqsave(&rxq->lock, flags);
|
|
if (list_empty(&rxq->rx_used)) {
|
|
spin_unlock_irqrestore(&rxq->lock, flags);
|
|
return;
|
|
}
|
|
spin_unlock_irqrestore(&rxq->lock, flags);
|
|
|
|
if (rxq->free_count > RX_LOW_WATERMARK)
|
|
gfp_mask |= __GFP_NOWARN;
|
|
|
|
if (priv->hw_params.rx_page_order > 0)
|
|
gfp_mask |= __GFP_COMP;
|
|
|
|
/* Alloc a new receive buffer */
|
|
page = alloc_pages(gfp_mask, priv->hw_params.rx_page_order);
|
|
if (!page) {
|
|
if (net_ratelimit())
|
|
IWL_DEBUG_INFO(priv, "alloc_pages failed, "
|
|
"order: %d\n",
|
|
priv->hw_params.rx_page_order);
|
|
|
|
if ((rxq->free_count <= RX_LOW_WATERMARK) &&
|
|
net_ratelimit())
|
|
IWL_CRIT(priv,
|
|
"Failed to alloc_pages with %s. "
|
|
"Only %u free buffers remaining.\n",
|
|
priority == GFP_ATOMIC ?
|
|
"GFP_ATOMIC" : "GFP_KERNEL",
|
|
rxq->free_count);
|
|
/* We don't reschedule replenish work here -- we will
|
|
* call the restock method and if it still needs
|
|
* more buffers it will schedule replenish */
|
|
return;
|
|
}
|
|
|
|
spin_lock_irqsave(&rxq->lock, flags);
|
|
|
|
if (list_empty(&rxq->rx_used)) {
|
|
spin_unlock_irqrestore(&rxq->lock, flags);
|
|
__free_pages(page, priv->hw_params.rx_page_order);
|
|
return;
|
|
}
|
|
element = rxq->rx_used.next;
|
|
rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
|
|
list_del(element);
|
|
|
|
spin_unlock_irqrestore(&rxq->lock, flags);
|
|
|
|
BUG_ON(rxb->page);
|
|
rxb->page = page;
|
|
/* Get physical address of the RB */
|
|
rxb->page_dma = pci_map_page(priv->pci_dev, page, 0,
|
|
PAGE_SIZE << priv->hw_params.rx_page_order,
|
|
PCI_DMA_FROMDEVICE);
|
|
/* dma address must be no more than 36 bits */
|
|
BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36));
|
|
/* and also 256 byte aligned! */
|
|
BUG_ON(rxb->page_dma & DMA_BIT_MASK(8));
|
|
|
|
spin_lock_irqsave(&rxq->lock, flags);
|
|
|
|
list_add_tail(&rxb->list, &rxq->rx_free);
|
|
rxq->free_count++;
|
|
priv->alloc_rxb_page++;
|
|
|
|
spin_unlock_irqrestore(&rxq->lock, flags);
|
|
}
|
|
}
|
|
|
|
void iwl4965_rx_replenish(struct iwl_priv *priv)
|
|
{
|
|
unsigned long flags;
|
|
|
|
iwl4965_rx_allocate(priv, GFP_KERNEL);
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
iwl4965_rx_queue_restock(priv);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
}
|
|
|
|
void iwl4965_rx_replenish_now(struct iwl_priv *priv)
|
|
{
|
|
iwl4965_rx_allocate(priv, GFP_ATOMIC);
|
|
|
|
iwl4965_rx_queue_restock(priv);
|
|
}
|
|
|
|
/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
|
|
* If an SKB has been detached, the POOL needs to have its SKB set to NULL
|
|
* This free routine walks the list of POOL entries and if SKB is set to
|
|
* non NULL it is unmapped and freed
|
|
*/
|
|
void iwl4965_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
|
|
{
|
|
int i;
|
|
for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
|
|
if (rxq->pool[i].page != NULL) {
|
|
pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
|
|
PAGE_SIZE << priv->hw_params.rx_page_order,
|
|
PCI_DMA_FROMDEVICE);
|
|
__iwl_legacy_free_pages(priv, rxq->pool[i].page);
|
|
rxq->pool[i].page = NULL;
|
|
}
|
|
}
|
|
|
|
dma_free_coherent(&priv->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
|
|
rxq->bd_dma);
|
|
dma_free_coherent(&priv->pci_dev->dev, sizeof(struct iwl_rb_status),
|
|
rxq->rb_stts, rxq->rb_stts_dma);
|
|
rxq->bd = NULL;
|
|
rxq->rb_stts = NULL;
|
|
}
|
|
|
|
int iwl4965_rxq_stop(struct iwl_priv *priv)
|
|
{
|
|
|
|
/* stop Rx DMA */
|
|
iwl_legacy_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
|
|
iwl_poll_direct_bit(priv, FH_MEM_RSSR_RX_STATUS_REG,
|
|
FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int iwl4965_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band)
|
|
{
|
|
int idx = 0;
|
|
int band_offset = 0;
|
|
|
|
/* HT rate format: mac80211 wants an MCS number, which is just LSB */
|
|
if (rate_n_flags & RATE_MCS_HT_MSK) {
|
|
idx = (rate_n_flags & 0xff);
|
|
return idx;
|
|
/* Legacy rate format, search for match in table */
|
|
} else {
|
|
if (band == IEEE80211_BAND_5GHZ)
|
|
band_offset = IWL_FIRST_OFDM_RATE;
|
|
for (idx = band_offset; idx < IWL_RATE_COUNT_LEGACY; idx++)
|
|
if (iwlegacy_rates[idx].plcp == (rate_n_flags & 0xFF))
|
|
return idx - band_offset;
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
static int iwl4965_calc_rssi(struct iwl_priv *priv,
|
|
struct iwl_rx_phy_res *rx_resp)
|
|
{
|
|
/* data from PHY/DSP regarding signal strength, etc.,
|
|
* contents are always there, not configurable by host. */
|
|
struct iwl4965_rx_non_cfg_phy *ncphy =
|
|
(struct iwl4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy_buf;
|
|
u32 agc = (le16_to_cpu(ncphy->agc_info) & IWL49_AGC_DB_MASK)
|
|
>> IWL49_AGC_DB_POS;
|
|
|
|
u32 valid_antennae =
|
|
(le16_to_cpu(rx_resp->phy_flags) & IWL49_RX_PHY_FLAGS_ANTENNAE_MASK)
|
|
>> IWL49_RX_PHY_FLAGS_ANTENNAE_OFFSET;
|
|
u8 max_rssi = 0;
|
|
u32 i;
|
|
|
|
/* Find max rssi among 3 possible receivers.
|
|
* These values are measured by the digital signal processor (DSP).
|
|
* They should stay fairly constant even as the signal strength varies,
|
|
* if the radio's automatic gain control (AGC) is working right.
|
|
* AGC value (see below) will provide the "interesting" info. */
|
|
for (i = 0; i < 3; i++)
|
|
if (valid_antennae & (1 << i))
|
|
max_rssi = max(ncphy->rssi_info[i << 1], max_rssi);
|
|
|
|
IWL_DEBUG_STATS(priv, "Rssi In A %d B %d C %d Max %d AGC dB %d\n",
|
|
ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4],
|
|
max_rssi, agc);
|
|
|
|
/* dBm = max_rssi dB - agc dB - constant.
|
|
* Higher AGC (higher radio gain) means lower signal. */
|
|
return max_rssi - agc - IWL4965_RSSI_OFFSET;
|
|
}
|
|
|
|
|
|
static u32 iwl4965_translate_rx_status(struct iwl_priv *priv, u32 decrypt_in)
|
|
{
|
|
u32 decrypt_out = 0;
|
|
|
|
if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) ==
|
|
RX_RES_STATUS_STATION_FOUND)
|
|
decrypt_out |= (RX_RES_STATUS_STATION_FOUND |
|
|
RX_RES_STATUS_NO_STATION_INFO_MISMATCH);
|
|
|
|
decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK);
|
|
|
|
/* packet was not encrypted */
|
|
if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
|
|
RX_RES_STATUS_SEC_TYPE_NONE)
|
|
return decrypt_out;
|
|
|
|
/* packet was encrypted with unknown alg */
|
|
if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
|
|
RX_RES_STATUS_SEC_TYPE_ERR)
|
|
return decrypt_out;
|
|
|
|
/* decryption was not done in HW */
|
|
if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) !=
|
|
RX_MPDU_RES_STATUS_DEC_DONE_MSK)
|
|
return decrypt_out;
|
|
|
|
switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) {
|
|
|
|
case RX_RES_STATUS_SEC_TYPE_CCMP:
|
|
/* alg is CCM: check MIC only */
|
|
if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK))
|
|
/* Bad MIC */
|
|
decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
|
|
else
|
|
decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
|
|
|
|
break;
|
|
|
|
case RX_RES_STATUS_SEC_TYPE_TKIP:
|
|
if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) {
|
|
/* Bad TTAK */
|
|
decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK;
|
|
break;
|
|
}
|
|
/* fall through if TTAK OK */
|
|
default:
|
|
if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK))
|
|
decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
|
|
else
|
|
decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
|
|
break;
|
|
}
|
|
|
|
IWL_DEBUG_RX(priv, "decrypt_in:0x%x decrypt_out = 0x%x\n",
|
|
decrypt_in, decrypt_out);
|
|
|
|
return decrypt_out;
|
|
}
|
|
|
|
static void iwl4965_pass_packet_to_mac80211(struct iwl_priv *priv,
|
|
struct ieee80211_hdr *hdr,
|
|
u16 len,
|
|
u32 ampdu_status,
|
|
struct iwl_rx_mem_buffer *rxb,
|
|
struct ieee80211_rx_status *stats)
|
|
{
|
|
struct sk_buff *skb;
|
|
__le16 fc = hdr->frame_control;
|
|
|
|
/* We only process data packets if the interface is open */
|
|
if (unlikely(!priv->is_open)) {
|
|
IWL_DEBUG_DROP_LIMIT(priv,
|
|
"Dropping packet while interface is not open.\n");
|
|
return;
|
|
}
|
|
|
|
/* In case of HW accelerated crypto and bad decryption, drop */
|
|
if (!priv->cfg->mod_params->sw_crypto &&
|
|
iwl_legacy_set_decrypted_flag(priv, hdr, ampdu_status, stats))
|
|
return;
|
|
|
|
skb = dev_alloc_skb(128);
|
|
if (!skb) {
|
|
IWL_ERR(priv, "dev_alloc_skb failed\n");
|
|
return;
|
|
}
|
|
|
|
skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb), len);
|
|
|
|
iwl_legacy_update_stats(priv, false, fc, len);
|
|
memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
|
|
|
|
ieee80211_rx(priv->hw, skb);
|
|
priv->alloc_rxb_page--;
|
|
rxb->page = NULL;
|
|
}
|
|
|
|
/* Called for REPLY_RX (legacy ABG frames), or
|
|
* REPLY_RX_MPDU_CMD (HT high-throughput N frames). */
|
|
void iwl4965_rx_reply_rx(struct iwl_priv *priv,
|
|
struct iwl_rx_mem_buffer *rxb)
|
|
{
|
|
struct ieee80211_hdr *header;
|
|
struct ieee80211_rx_status rx_status;
|
|
struct iwl_rx_packet *pkt = rxb_addr(rxb);
|
|
struct iwl_rx_phy_res *phy_res;
|
|
__le32 rx_pkt_status;
|
|
struct iwl_rx_mpdu_res_start *amsdu;
|
|
u32 len;
|
|
u32 ampdu_status;
|
|
u32 rate_n_flags;
|
|
|
|
/**
|
|
* REPLY_RX and REPLY_RX_MPDU_CMD are handled differently.
|
|
* REPLY_RX: physical layer info is in this buffer
|
|
* REPLY_RX_MPDU_CMD: physical layer info was sent in separate
|
|
* command and cached in priv->last_phy_res
|
|
*
|
|
* Here we set up local variables depending on which command is
|
|
* received.
|
|
*/
|
|
if (pkt->hdr.cmd == REPLY_RX) {
|
|
phy_res = (struct iwl_rx_phy_res *)pkt->u.raw;
|
|
header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*phy_res)
|
|
+ phy_res->cfg_phy_cnt);
|
|
|
|
len = le16_to_cpu(phy_res->byte_count);
|
|
rx_pkt_status = *(__le32 *)(pkt->u.raw + sizeof(*phy_res) +
|
|
phy_res->cfg_phy_cnt + len);
|
|
ampdu_status = le32_to_cpu(rx_pkt_status);
|
|
} else {
|
|
if (!priv->_4965.last_phy_res_valid) {
|
|
IWL_ERR(priv, "MPDU frame without cached PHY data\n");
|
|
return;
|
|
}
|
|
phy_res = &priv->_4965.last_phy_res;
|
|
amsdu = (struct iwl_rx_mpdu_res_start *)pkt->u.raw;
|
|
header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*amsdu));
|
|
len = le16_to_cpu(amsdu->byte_count);
|
|
rx_pkt_status = *(__le32 *)(pkt->u.raw + sizeof(*amsdu) + len);
|
|
ampdu_status = iwl4965_translate_rx_status(priv,
|
|
le32_to_cpu(rx_pkt_status));
|
|
}
|
|
|
|
if ((unlikely(phy_res->cfg_phy_cnt > 20))) {
|
|
IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d/n",
|
|
phy_res->cfg_phy_cnt);
|
|
return;
|
|
}
|
|
|
|
if (!(rx_pkt_status & RX_RES_STATUS_NO_CRC32_ERROR) ||
|
|
!(rx_pkt_status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
|
|
IWL_DEBUG_RX(priv, "Bad CRC or FIFO: 0x%08X.\n",
|
|
le32_to_cpu(rx_pkt_status));
|
|
return;
|
|
}
|
|
|
|
/* This will be used in several places later */
|
|
rate_n_flags = le32_to_cpu(phy_res->rate_n_flags);
|
|
|
|
/* rx_status carries information about the packet to mac80211 */
|
|
rx_status.mactime = le64_to_cpu(phy_res->timestamp);
|
|
rx_status.freq =
|
|
ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel),
|
|
rx_status.band);
|
|
rx_status.band = (phy_res->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
|
|
IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
|
|
rx_status.rate_idx =
|
|
iwl4965_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band);
|
|
rx_status.flag = 0;
|
|
|
|
/* TSF isn't reliable. In order to allow smooth user experience,
|
|
* this W/A doesn't propagate it to the mac80211 */
|
|
/*rx_status.flag |= RX_FLAG_MACTIME_MPDU;*/
|
|
|
|
priv->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp);
|
|
|
|
/* Find max signal strength (dBm) among 3 antenna/receiver chains */
|
|
rx_status.signal = iwl4965_calc_rssi(priv, phy_res);
|
|
|
|
iwl_legacy_dbg_log_rx_data_frame(priv, len, header);
|
|
IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, TSF %llu\n",
|
|
rx_status.signal, (unsigned long long)rx_status.mactime);
|
|
|
|
/*
|
|
* "antenna number"
|
|
*
|
|
* It seems that the antenna field in the phy flags value
|
|
* is actually a bit field. This is undefined by radiotap,
|
|
* it wants an actual antenna number but I always get "7"
|
|
* for most legacy frames I receive indicating that the
|
|
* same frame was received on all three RX chains.
|
|
*
|
|
* I think this field should be removed in favor of a
|
|
* new 802.11n radiotap field "RX chains" that is defined
|
|
* as a bitmask.
|
|
*/
|
|
rx_status.antenna =
|
|
(le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK)
|
|
>> RX_RES_PHY_FLAGS_ANTENNA_POS;
|
|
|
|
/* set the preamble flag if appropriate */
|
|
if (phy_res->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
|
|
rx_status.flag |= RX_FLAG_SHORTPRE;
|
|
|
|
/* Set up the HT phy flags */
|
|
if (rate_n_flags & RATE_MCS_HT_MSK)
|
|
rx_status.flag |= RX_FLAG_HT;
|
|
if (rate_n_flags & RATE_MCS_HT40_MSK)
|
|
rx_status.flag |= RX_FLAG_40MHZ;
|
|
if (rate_n_flags & RATE_MCS_SGI_MSK)
|
|
rx_status.flag |= RX_FLAG_SHORT_GI;
|
|
|
|
iwl4965_pass_packet_to_mac80211(priv, header, len, ampdu_status,
|
|
rxb, &rx_status);
|
|
}
|
|
|
|
/* Cache phy data (Rx signal strength, etc) for HT frame (REPLY_RX_PHY_CMD).
|
|
* This will be used later in iwl_rx_reply_rx() for REPLY_RX_MPDU_CMD. */
|
|
void iwl4965_rx_reply_rx_phy(struct iwl_priv *priv,
|
|
struct iwl_rx_mem_buffer *rxb)
|
|
{
|
|
struct iwl_rx_packet *pkt = rxb_addr(rxb);
|
|
priv->_4965.last_phy_res_valid = true;
|
|
memcpy(&priv->_4965.last_phy_res, pkt->u.raw,
|
|
sizeof(struct iwl_rx_phy_res));
|
|
}
|
|
|
|
static int iwl4965_get_single_channel_for_scan(struct iwl_priv *priv,
|
|
struct ieee80211_vif *vif,
|
|
enum ieee80211_band band,
|
|
struct iwl_scan_channel *scan_ch)
|
|
{
|
|
const struct ieee80211_supported_band *sband;
|
|
u16 passive_dwell = 0;
|
|
u16 active_dwell = 0;
|
|
int added = 0;
|
|
u16 channel = 0;
|
|
|
|
sband = iwl_get_hw_mode(priv, band);
|
|
if (!sband) {
|
|
IWL_ERR(priv, "invalid band\n");
|
|
return added;
|
|
}
|
|
|
|
active_dwell = iwl_legacy_get_active_dwell_time(priv, band, 0);
|
|
passive_dwell = iwl_legacy_get_passive_dwell_time(priv, band, vif);
|
|
|
|
if (passive_dwell <= active_dwell)
|
|
passive_dwell = active_dwell + 1;
|
|
|
|
channel = iwl_legacy_get_single_channel_number(priv, band);
|
|
if (channel) {
|
|
scan_ch->channel = cpu_to_le16(channel);
|
|
scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
|
|
scan_ch->active_dwell = cpu_to_le16(active_dwell);
|
|
scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
|
|
/* Set txpower levels to defaults */
|
|
scan_ch->dsp_atten = 110;
|
|
if (band == IEEE80211_BAND_5GHZ)
|
|
scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
|
|
else
|
|
scan_ch->tx_gain = ((1 << 5) | (5 << 3));
|
|
added++;
|
|
} else
|
|
IWL_ERR(priv, "no valid channel found\n");
|
|
return added;
|
|
}
|
|
|
|
static int iwl4965_get_channels_for_scan(struct iwl_priv *priv,
|
|
struct ieee80211_vif *vif,
|
|
enum ieee80211_band band,
|
|
u8 is_active, u8 n_probes,
|
|
struct iwl_scan_channel *scan_ch)
|
|
{
|
|
struct ieee80211_channel *chan;
|
|
const struct ieee80211_supported_band *sband;
|
|
const struct iwl_channel_info *ch_info;
|
|
u16 passive_dwell = 0;
|
|
u16 active_dwell = 0;
|
|
int added, i;
|
|
u16 channel;
|
|
|
|
sband = iwl_get_hw_mode(priv, band);
|
|
if (!sband)
|
|
return 0;
|
|
|
|
active_dwell = iwl_legacy_get_active_dwell_time(priv, band, n_probes);
|
|
passive_dwell = iwl_legacy_get_passive_dwell_time(priv, band, vif);
|
|
|
|
if (passive_dwell <= active_dwell)
|
|
passive_dwell = active_dwell + 1;
|
|
|
|
for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) {
|
|
chan = priv->scan_request->channels[i];
|
|
|
|
if (chan->band != band)
|
|
continue;
|
|
|
|
channel = chan->hw_value;
|
|
scan_ch->channel = cpu_to_le16(channel);
|
|
|
|
ch_info = iwl_legacy_get_channel_info(priv, band, channel);
|
|
if (!iwl_legacy_is_channel_valid(ch_info)) {
|
|
IWL_DEBUG_SCAN(priv,
|
|
"Channel %d is INVALID for this band.\n",
|
|
channel);
|
|
continue;
|
|
}
|
|
|
|
if (!is_active || iwl_legacy_is_channel_passive(ch_info) ||
|
|
(chan->flags & IEEE80211_CHAN_PASSIVE_SCAN))
|
|
scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
|
|
else
|
|
scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE;
|
|
|
|
if (n_probes)
|
|
scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes);
|
|
|
|
scan_ch->active_dwell = cpu_to_le16(active_dwell);
|
|
scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
|
|
|
|
/* Set txpower levels to defaults */
|
|
scan_ch->dsp_atten = 110;
|
|
|
|
/* NOTE: if we were doing 6Mb OFDM for scans we'd use
|
|
* power level:
|
|
* scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
|
|
*/
|
|
if (band == IEEE80211_BAND_5GHZ)
|
|
scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
|
|
else
|
|
scan_ch->tx_gain = ((1 << 5) | (5 << 3));
|
|
|
|
IWL_DEBUG_SCAN(priv, "Scanning ch=%d prob=0x%X [%s %d]\n",
|
|
channel, le32_to_cpu(scan_ch->type),
|
|
(scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
|
|
"ACTIVE" : "PASSIVE",
|
|
(scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
|
|
active_dwell : passive_dwell);
|
|
|
|
scan_ch++;
|
|
added++;
|
|
}
|
|
|
|
IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added);
|
|
return added;
|
|
}
|
|
|
|
int iwl4965_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
|
|
{
|
|
struct iwl_host_cmd cmd = {
|
|
.id = REPLY_SCAN_CMD,
|
|
.len = sizeof(struct iwl_scan_cmd),
|
|
.flags = CMD_SIZE_HUGE,
|
|
};
|
|
struct iwl_scan_cmd *scan;
|
|
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
|
|
u32 rate_flags = 0;
|
|
u16 cmd_len;
|
|
u16 rx_chain = 0;
|
|
enum ieee80211_band band;
|
|
u8 n_probes = 0;
|
|
u8 rx_ant = priv->hw_params.valid_rx_ant;
|
|
u8 rate;
|
|
bool is_active = false;
|
|
int chan_mod;
|
|
u8 active_chains;
|
|
u8 scan_tx_antennas = priv->hw_params.valid_tx_ant;
|
|
int ret;
|
|
|
|
lockdep_assert_held(&priv->mutex);
|
|
|
|
if (vif)
|
|
ctx = iwl_legacy_rxon_ctx_from_vif(vif);
|
|
|
|
if (!priv->scan_cmd) {
|
|
priv->scan_cmd = kmalloc(sizeof(struct iwl_scan_cmd) +
|
|
IWL_MAX_SCAN_SIZE, GFP_KERNEL);
|
|
if (!priv->scan_cmd) {
|
|
IWL_DEBUG_SCAN(priv,
|
|
"fail to allocate memory for scan\n");
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
scan = priv->scan_cmd;
|
|
memset(scan, 0, sizeof(struct iwl_scan_cmd) + IWL_MAX_SCAN_SIZE);
|
|
|
|
scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
|
|
scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
|
|
|
|
if (iwl_legacy_is_any_associated(priv)) {
|
|
u16 interval = 0;
|
|
u32 extra;
|
|
u32 suspend_time = 100;
|
|
u32 scan_suspend_time = 100;
|
|
|
|
IWL_DEBUG_INFO(priv, "Scanning while associated...\n");
|
|
if (priv->is_internal_short_scan)
|
|
interval = 0;
|
|
else
|
|
interval = vif->bss_conf.beacon_int;
|
|
|
|
scan->suspend_time = 0;
|
|
scan->max_out_time = cpu_to_le32(200 * 1024);
|
|
if (!interval)
|
|
interval = suspend_time;
|
|
|
|
extra = (suspend_time / interval) << 22;
|
|
scan_suspend_time = (extra |
|
|
((suspend_time % interval) * 1024));
|
|
scan->suspend_time = cpu_to_le32(scan_suspend_time);
|
|
IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n",
|
|
scan_suspend_time, interval);
|
|
}
|
|
|
|
if (priv->is_internal_short_scan) {
|
|
IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n");
|
|
} else if (priv->scan_request->n_ssids) {
|
|
int i, p = 0;
|
|
IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
|
|
for (i = 0; i < priv->scan_request->n_ssids; i++) {
|
|
/* always does wildcard anyway */
|
|
if (!priv->scan_request->ssids[i].ssid_len)
|
|
continue;
|
|
scan->direct_scan[p].id = WLAN_EID_SSID;
|
|
scan->direct_scan[p].len =
|
|
priv->scan_request->ssids[i].ssid_len;
|
|
memcpy(scan->direct_scan[p].ssid,
|
|
priv->scan_request->ssids[i].ssid,
|
|
priv->scan_request->ssids[i].ssid_len);
|
|
n_probes++;
|
|
p++;
|
|
}
|
|
is_active = true;
|
|
} else
|
|
IWL_DEBUG_SCAN(priv, "Start passive scan.\n");
|
|
|
|
scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
|
|
scan->tx_cmd.sta_id = ctx->bcast_sta_id;
|
|
scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
|
|
|
|
switch (priv->scan_band) {
|
|
case IEEE80211_BAND_2GHZ:
|
|
scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
|
|
chan_mod = le32_to_cpu(
|
|
priv->contexts[IWL_RXON_CTX_BSS].active.flags &
|
|
RXON_FLG_CHANNEL_MODE_MSK)
|
|
>> RXON_FLG_CHANNEL_MODE_POS;
|
|
if (chan_mod == CHANNEL_MODE_PURE_40) {
|
|
rate = IWL_RATE_6M_PLCP;
|
|
} else {
|
|
rate = IWL_RATE_1M_PLCP;
|
|
rate_flags = RATE_MCS_CCK_MSK;
|
|
}
|
|
break;
|
|
case IEEE80211_BAND_5GHZ:
|
|
rate = IWL_RATE_6M_PLCP;
|
|
break;
|
|
default:
|
|
IWL_WARN(priv, "Invalid scan band\n");
|
|
return -EIO;
|
|
}
|
|
|
|
/*
|
|
* If active scanning is requested but a certain channel is
|
|
* marked passive, we can do active scanning if we detect
|
|
* transmissions.
|
|
*
|
|
* There is an issue with some firmware versions that triggers
|
|
* a sysassert on a "good CRC threshold" of zero (== disabled),
|
|
* on a radar channel even though this means that we should NOT
|
|
* send probes.
|
|
*
|
|
* The "good CRC threshold" is the number of frames that we
|
|
* need to receive during our dwell time on a channel before
|
|
* sending out probes -- setting this to a huge value will
|
|
* mean we never reach it, but at the same time work around
|
|
* the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER
|
|
* here instead of IWL_GOOD_CRC_TH_DISABLED.
|
|
*/
|
|
scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
|
|
IWL_GOOD_CRC_TH_NEVER;
|
|
|
|
band = priv->scan_band;
|
|
|
|
if (priv->cfg->scan_rx_antennas[band])
|
|
rx_ant = priv->cfg->scan_rx_antennas[band];
|
|
|
|
if (priv->cfg->scan_tx_antennas[band])
|
|
scan_tx_antennas = priv->cfg->scan_tx_antennas[band];
|
|
|
|
priv->scan_tx_ant[band] = iwl4965_toggle_tx_ant(priv,
|
|
priv->scan_tx_ant[band],
|
|
scan_tx_antennas);
|
|
rate_flags |= iwl4965_ant_idx_to_flags(priv->scan_tx_ant[band]);
|
|
scan->tx_cmd.rate_n_flags = iwl4965_hw_set_rate_n_flags(rate, rate_flags);
|
|
|
|
/* In power save mode use one chain, otherwise use all chains */
|
|
if (test_bit(STATUS_POWER_PMI, &priv->status)) {
|
|
/* rx_ant has been set to all valid chains previously */
|
|
active_chains = rx_ant &
|
|
((u8)(priv->chain_noise_data.active_chains));
|
|
if (!active_chains)
|
|
active_chains = rx_ant;
|
|
|
|
IWL_DEBUG_SCAN(priv, "chain_noise_data.active_chains: %u\n",
|
|
priv->chain_noise_data.active_chains);
|
|
|
|
rx_ant = iwl4965_first_antenna(active_chains);
|
|
}
|
|
|
|
/* MIMO is not used here, but value is required */
|
|
rx_chain |= priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
|
|
rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
|
|
rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS;
|
|
rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
|
|
scan->rx_chain = cpu_to_le16(rx_chain);
|
|
if (!priv->is_internal_short_scan) {
|
|
cmd_len = iwl_legacy_fill_probe_req(priv,
|
|
(struct ieee80211_mgmt *)scan->data,
|
|
vif->addr,
|
|
priv->scan_request->ie,
|
|
priv->scan_request->ie_len,
|
|
IWL_MAX_SCAN_SIZE - sizeof(*scan));
|
|
} else {
|
|
/* use bcast addr, will not be transmitted but must be valid */
|
|
cmd_len = iwl_legacy_fill_probe_req(priv,
|
|
(struct ieee80211_mgmt *)scan->data,
|
|
iwlegacy_bcast_addr, NULL, 0,
|
|
IWL_MAX_SCAN_SIZE - sizeof(*scan));
|
|
|
|
}
|
|
scan->tx_cmd.len = cpu_to_le16(cmd_len);
|
|
|
|
scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK |
|
|
RXON_FILTER_BCON_AWARE_MSK);
|
|
|
|
if (priv->is_internal_short_scan) {
|
|
scan->channel_count =
|
|
iwl4965_get_single_channel_for_scan(priv, vif, band,
|
|
(void *)&scan->data[le16_to_cpu(
|
|
scan->tx_cmd.len)]);
|
|
} else {
|
|
scan->channel_count =
|
|
iwl4965_get_channels_for_scan(priv, vif, band,
|
|
is_active, n_probes,
|
|
(void *)&scan->data[le16_to_cpu(
|
|
scan->tx_cmd.len)]);
|
|
}
|
|
if (scan->channel_count == 0) {
|
|
IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
|
|
return -EIO;
|
|
}
|
|
|
|
cmd.len += le16_to_cpu(scan->tx_cmd.len) +
|
|
scan->channel_count * sizeof(struct iwl_scan_channel);
|
|
cmd.data = scan;
|
|
scan->len = cpu_to_le16(cmd.len);
|
|
|
|
set_bit(STATUS_SCAN_HW, &priv->status);
|
|
|
|
ret = iwl_legacy_send_cmd_sync(priv, &cmd);
|
|
if (ret)
|
|
clear_bit(STATUS_SCAN_HW, &priv->status);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int iwl4965_manage_ibss_station(struct iwl_priv *priv,
|
|
struct ieee80211_vif *vif, bool add)
|
|
{
|
|
struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
|
|
|
|
if (add)
|
|
return iwl4965_add_bssid_station(priv, vif_priv->ctx,
|
|
vif->bss_conf.bssid,
|
|
&vif_priv->ibss_bssid_sta_id);
|
|
return iwl_legacy_remove_station(priv, vif_priv->ibss_bssid_sta_id,
|
|
vif->bss_conf.bssid);
|
|
}
|
|
|
|
void iwl4965_free_tfds_in_queue(struct iwl_priv *priv,
|
|
int sta_id, int tid, int freed)
|
|
{
|
|
lockdep_assert_held(&priv->sta_lock);
|
|
|
|
if (priv->stations[sta_id].tid[tid].tfds_in_queue >= freed)
|
|
priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
|
|
else {
|
|
IWL_DEBUG_TX(priv, "free more than tfds_in_queue (%u:%d)\n",
|
|
priv->stations[sta_id].tid[tid].tfds_in_queue,
|
|
freed);
|
|
priv->stations[sta_id].tid[tid].tfds_in_queue = 0;
|
|
}
|
|
}
|
|
|
|
#define IWL_TX_QUEUE_MSK 0xfffff
|
|
|
|
static bool iwl4965_is_single_rx_stream(struct iwl_priv *priv)
|
|
{
|
|
return priv->current_ht_config.smps == IEEE80211_SMPS_STATIC ||
|
|
priv->current_ht_config.single_chain_sufficient;
|
|
}
|
|
|
|
#define IWL_NUM_RX_CHAINS_MULTIPLE 3
|
|
#define IWL_NUM_RX_CHAINS_SINGLE 2
|
|
#define IWL_NUM_IDLE_CHAINS_DUAL 2
|
|
#define IWL_NUM_IDLE_CHAINS_SINGLE 1
|
|
|
|
/*
|
|
* Determine how many receiver/antenna chains to use.
|
|
*
|
|
* More provides better reception via diversity. Fewer saves power
|
|
* at the expense of throughput, but only when not in powersave to
|
|
* start with.
|
|
*
|
|
* MIMO (dual stream) requires at least 2, but works better with 3.
|
|
* This does not determine *which* chains to use, just how many.
|
|
*/
|
|
static int iwl4965_get_active_rx_chain_count(struct iwl_priv *priv)
|
|
{
|
|
/* # of Rx chains to use when expecting MIMO. */
|
|
if (iwl4965_is_single_rx_stream(priv))
|
|
return IWL_NUM_RX_CHAINS_SINGLE;
|
|
else
|
|
return IWL_NUM_RX_CHAINS_MULTIPLE;
|
|
}
|
|
|
|
/*
|
|
* When we are in power saving mode, unless device support spatial
|
|
* multiplexing power save, use the active count for rx chain count.
|
|
*/
|
|
static int
|
|
iwl4965_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt)
|
|
{
|
|
/* # Rx chains when idling, depending on SMPS mode */
|
|
switch (priv->current_ht_config.smps) {
|
|
case IEEE80211_SMPS_STATIC:
|
|
case IEEE80211_SMPS_DYNAMIC:
|
|
return IWL_NUM_IDLE_CHAINS_SINGLE;
|
|
case IEEE80211_SMPS_OFF:
|
|
return active_cnt;
|
|
default:
|
|
WARN(1, "invalid SMPS mode %d",
|
|
priv->current_ht_config.smps);
|
|
return active_cnt;
|
|
}
|
|
}
|
|
|
|
/* up to 4 chains */
|
|
static u8 iwl4965_count_chain_bitmap(u32 chain_bitmap)
|
|
{
|
|
u8 res;
|
|
res = (chain_bitmap & BIT(0)) >> 0;
|
|
res += (chain_bitmap & BIT(1)) >> 1;
|
|
res += (chain_bitmap & BIT(2)) >> 2;
|
|
res += (chain_bitmap & BIT(3)) >> 3;
|
|
return res;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
|
|
*
|
|
* Selects how many and which Rx receivers/antennas/chains to use.
|
|
* This should not be used for scan command ... it puts data in wrong place.
|
|
*/
|
|
void iwl4965_set_rxon_chain(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
|
|
{
|
|
bool is_single = iwl4965_is_single_rx_stream(priv);
|
|
bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
|
|
u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt;
|
|
u32 active_chains;
|
|
u16 rx_chain;
|
|
|
|
/* Tell uCode which antennas are actually connected.
|
|
* Before first association, we assume all antennas are connected.
|
|
* Just after first association, iwl4965_chain_noise_calibration()
|
|
* checks which antennas actually *are* connected. */
|
|
if (priv->chain_noise_data.active_chains)
|
|
active_chains = priv->chain_noise_data.active_chains;
|
|
else
|
|
active_chains = priv->hw_params.valid_rx_ant;
|
|
|
|
rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS;
|
|
|
|
/* How many receivers should we use? */
|
|
active_rx_cnt = iwl4965_get_active_rx_chain_count(priv);
|
|
idle_rx_cnt = iwl4965_get_idle_rx_chain_count(priv, active_rx_cnt);
|
|
|
|
|
|
/* correct rx chain count according hw settings
|
|
* and chain noise calibration
|
|
*/
|
|
valid_rx_cnt = iwl4965_count_chain_bitmap(active_chains);
|
|
if (valid_rx_cnt < active_rx_cnt)
|
|
active_rx_cnt = valid_rx_cnt;
|
|
|
|
if (valid_rx_cnt < idle_rx_cnt)
|
|
idle_rx_cnt = valid_rx_cnt;
|
|
|
|
rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS;
|
|
rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS;
|
|
|
|
ctx->staging.rx_chain = cpu_to_le16(rx_chain);
|
|
|
|
if (!is_single && (active_rx_cnt >= IWL_NUM_RX_CHAINS_SINGLE) && is_cam)
|
|
ctx->staging.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
|
|
else
|
|
ctx->staging.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
|
|
|
|
IWL_DEBUG_ASSOC(priv, "rx_chain=0x%X active=%d idle=%d\n",
|
|
ctx->staging.rx_chain,
|
|
active_rx_cnt, idle_rx_cnt);
|
|
|
|
WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 ||
|
|
active_rx_cnt < idle_rx_cnt);
|
|
}
|
|
|
|
u8 iwl4965_toggle_tx_ant(struct iwl_priv *priv, u8 ant, u8 valid)
|
|
{
|
|
int i;
|
|
u8 ind = ant;
|
|
|
|
for (i = 0; i < RATE_ANT_NUM - 1; i++) {
|
|
ind = (ind + 1) < RATE_ANT_NUM ? ind + 1 : 0;
|
|
if (valid & BIT(ind))
|
|
return ind;
|
|
}
|
|
return ant;
|
|
}
|
|
|
|
static const char *iwl4965_get_fh_string(int cmd)
|
|
{
|
|
switch (cmd) {
|
|
IWL_CMD(FH_RSCSR_CHNL0_STTS_WPTR_REG);
|
|
IWL_CMD(FH_RSCSR_CHNL0_RBDCB_BASE_REG);
|
|
IWL_CMD(FH_RSCSR_CHNL0_WPTR);
|
|
IWL_CMD(FH_MEM_RCSR_CHNL0_CONFIG_REG);
|
|
IWL_CMD(FH_MEM_RSSR_SHARED_CTRL_REG);
|
|
IWL_CMD(FH_MEM_RSSR_RX_STATUS_REG);
|
|
IWL_CMD(FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV);
|
|
IWL_CMD(FH_TSSR_TX_STATUS_REG);
|
|
IWL_CMD(FH_TSSR_TX_ERROR_REG);
|
|
default:
|
|
return "UNKNOWN";
|
|
}
|
|
}
|
|
|
|
int iwl4965_dump_fh(struct iwl_priv *priv, char **buf, bool display)
|
|
{
|
|
int i;
|
|
#ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
|
|
int pos = 0;
|
|
size_t bufsz = 0;
|
|
#endif
|
|
static const u32 fh_tbl[] = {
|
|
FH_RSCSR_CHNL0_STTS_WPTR_REG,
|
|
FH_RSCSR_CHNL0_RBDCB_BASE_REG,
|
|
FH_RSCSR_CHNL0_WPTR,
|
|
FH_MEM_RCSR_CHNL0_CONFIG_REG,
|
|
FH_MEM_RSSR_SHARED_CTRL_REG,
|
|
FH_MEM_RSSR_RX_STATUS_REG,
|
|
FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV,
|
|
FH_TSSR_TX_STATUS_REG,
|
|
FH_TSSR_TX_ERROR_REG
|
|
};
|
|
#ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
|
|
if (display) {
|
|
bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40;
|
|
*buf = kmalloc(bufsz, GFP_KERNEL);
|
|
if (!*buf)
|
|
return -ENOMEM;
|
|
pos += scnprintf(*buf + pos, bufsz - pos,
|
|
"FH register values:\n");
|
|
for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) {
|
|
pos += scnprintf(*buf + pos, bufsz - pos,
|
|
" %34s: 0X%08x\n",
|
|
iwl4965_get_fh_string(fh_tbl[i]),
|
|
iwl_legacy_read_direct32(priv, fh_tbl[i]));
|
|
}
|
|
return pos;
|
|
}
|
|
#endif
|
|
IWL_ERR(priv, "FH register values:\n");
|
|
for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) {
|
|
IWL_ERR(priv, " %34s: 0X%08x\n",
|
|
iwl4965_get_fh_string(fh_tbl[i]),
|
|
iwl_legacy_read_direct32(priv, fh_tbl[i]));
|
|
}
|
|
return 0;
|
|
}
|