OpenCloudOS-Kernel/tools/perf
Linus Torvalds 9d31d23389 Networking changes for 5.13.
Core:
 
  - bpf:
 	- allow bpf programs calling kernel functions (initially to
 	  reuse TCP congestion control implementations)
 	- enable task local storage for tracing programs - remove the
 	  need to store per-task state in hash maps, and allow tracing
 	  programs access to task local storage previously added for
 	  BPF_LSM
 	- add bpf_for_each_map_elem() helper, allowing programs to
 	  walk all map elements in a more robust and easier to verify
 	  fashion
 	- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
 	  redirection
 	- lpm: add support for batched ops in LPM trie
 	- add BTF_KIND_FLOAT support - mostly to allow use of BTF
 	  on s390 which has floats in its headers files
 	- improve BPF syscall documentation and extend the use of kdoc
 	  parsing scripts we already employ for bpf-helpers
 	- libbpf, bpftool: support static linking of BPF ELF files
 	- improve support for encapsulation of L2 packets
 
  - xdp: restructure redirect actions to avoid a runtime lookup,
 	improving performance by 4-8% in microbenchmarks
 
  - xsk: build skb by page (aka generic zerocopy xmit) - improve
 	performance of software AF_XDP path by 33% for devices
 	which don't need headers in the linear skb part (e.g. virtio)
 
  - nexthop: resilient next-hop groups - improve path stability
 	on next-hops group changes (incl. offload for mlxsw)
 
  - ipv6: segment routing: add support for IPv4 decapsulation
 
  - icmp: add support for RFC 8335 extended PROBE messages
 
  - inet: use bigger hash table for IP ID generation
 
  - tcp: deal better with delayed TX completions - make sure we don't
 	give up on fast TCP retransmissions only because driver is
 	slow in reporting that it completed transmitting the original
 
  - tcp: reorder tcp_congestion_ops for better cache locality
 
  - mptcp:
 	- add sockopt support for common TCP options
 	- add support for common TCP msg flags
 	- include multiple address ids in RM_ADDR
 	- add reset option support for resetting one subflow
 
  - udp: GRO L4 improvements - improve 'forward' / 'frag_list'
 	co-existence with UDP tunnel GRO, allowing the first to take
 	place correctly	even for encapsulated UDP traffic
 
  - micro-optimize dev_gro_receive() and flow dissection, avoid
 	retpoline overhead on VLAN and TEB GRO
 
  - use less memory for sysctls, add a new sysctl type, to allow using
 	u8 instead of "int" and "long" and shrink networking sysctls
 
  - veth: allow GRO without XDP - this allows aggregating UDP
 	packets before handing them off to routing, bridge, OvS, etc.
 
  - allow specifing ifindex when device is moved to another namespace
 
  - netfilter:
 	- nft_socket: add support for cgroupsv2
 	- nftables: add catch-all set element - special element used
 	  to define a default action in case normal lookup missed
 	- use net_generic infra in many modules to avoid allocating
 	  per-ns memory unnecessarily
 
  - xps: improve the xps handling to avoid potential out-of-bound
 	accesses and use-after-free when XPS change race with other
 	re-configuration under traffic
 
  - add a config knob to turn off per-cpu netdev refcnt to catch
 	underflows in testing
 
 Device APIs:
 
  - add WWAN subsystem to organize the WWAN interfaces better and
    hopefully start driving towards more unified and vendor-
    -independent APIs
 
  - ethtool:
 	- add interface for reading IEEE MIB stats (incl. mlx5 and
 	  bnxt support)
 	- allow network drivers to dump arbitrary SFP EEPROM data,
 	  current offset+length API was a poor fit for modern SFP
 	  which define EEPROM in terms of pages (incl. mlx5 support)
 
  - act_police, flow_offload: add support for packet-per-second
 	policing (incl. offload for nfp)
 
  - psample: add additional metadata attributes like transit delay
 	for packets sampled from switch HW (and corresponding egress
 	and policy-based sampling in the mlxsw driver)
 
  - dsa: improve support for sandwiched LAGs with bridge and DSA
 
  - netfilter:
 	- flowtable: use direct xmit in topologies with IP
 	  forwarding, bridging, vlans etc.
 	- nftables: counter hardware offload support
 
  - Bluetooth:
 	- improvements for firmware download w/ Intel devices
 	- add support for reading AOSP vendor capabilities
 	- add support for virtio transport driver
 
  - mac80211:
 	- allow concurrent monitor iface and ethernet rx decap
 	- set priority and queue mapping for injected frames
 
  - phy: add support for Clause-45 PHY Loopback
 
  - pci/iov: add sysfs MSI-X vector assignment interface
 	to distribute MSI-X resources to VFs (incl. mlx5 support)
 
 New hardware/drivers:
 
  - dsa: mv88e6xxx: add support for Marvell mv88e6393x -
 	11-port Ethernet switch with 8x 1-Gigabit Ethernet
 	and 3x 10-Gigabit interfaces.
 
  - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365
 	and BCM63xx switches
 
  - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
 
  - ath11k: support for QCN9074 a 802.11ax device
 
  - Bluetooth: Broadcom BCM4330 and BMC4334
 
  - phy: Marvell 88X2222 transceiver support
 
  - mdio: add BCM6368 MDIO mux bus controller
 
  - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
 
  - mana: driver for Microsoft Azure Network Adapter (MANA)
 
  - Actions Semi Owl Ethernet MAC
 
  - can: driver for ETAS ES58X CAN/USB interfaces
 
 Pure driver changes:
 
  - add XDP support to: enetc, igc, stmmac
  - add AF_XDP support to: stmmac
 
  - virtio:
 	- page_to_skb() use build_skb when there's sufficient tailroom
 	  (21% improvement for 1000B UDP frames)
 	- support XDP even without dedicated Tx queues - share the Tx
 	  queues with the stack when necessary
 
  - mlx5:
 	- flow rules: add support for mirroring with conntrack,
 	  matching on ICMP, GTP, flex filters and more
 	- support packet sampling with flow offloads
 	- persist uplink representor netdev across eswitch mode
 	  changes
 	- allow coexistence of CQE compression and HW time-stamping
 	- add ethtool extended link error state reporting
 
  - ice, iavf: support flow filters, UDP Segmentation Offload
 
  - dpaa2-switch:
 	- move the driver out of staging
 	- add spanning tree (STP) support
 	- add rx copybreak support
 	- add tc flower hardware offload on ingress traffic
 
  - ionic:
 	- implement Rx page reuse
 	- support HW PTP time-stamping
 
  - octeon: support TC hardware offloads - flower matching on ingress
 	and egress ratelimitting.
 
  - stmmac:
 	- add RX frame steering based on VLAN priority in tc flower
 	- support frame preemption (FPE)
 	- intel: add cross time-stamping freq difference adjustment
 
  - ocelot:
 	- support forwarding of MRP frames in HW
 	- support multiple bridges
 	- support PTP Sync one-step timestamping
 
  - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
 	learning, flooding etc.
 
  - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
 	SC7280 SoCs)
 
  - mt7601u: enable TDLS support
 
  - mt76:
 	- add support for 802.3 rx frames (mt7915/mt7615)
 	- mt7915 flash pre-calibration support
 	- mt7921/mt7663 runtime power management fixes
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmCKFPIACgkQMUZtbf5S
 Irtw0g/+NA8bWdHNgG4H5rya0pv2z3IieLRmSdDfKRQQXcJpklawc5MKVVaTee/Q
 5/QqgPdCsu1LAU6JXBKsKmyDDaMlQKdWuKbOqDSiAQKoMesZStTEHf9d851ZzgxA
 Cdb6O7BD3lBl/IN+oxNG+KcmD1LKquTPKGySq2mQtEdLO12ekAsranzmj4voKffd
 q9tBShpXQ7Dq77DLYfiQXVCvsizNcbbJFuxX0o9Lpb9+61ZyYAbogZSa9ypiZZwR
 I/9azRBtJg7UV1aD/cLuAfy66Qh7t63+rCxVazs5Os8jVO26P/jQdisnnOe/x+p9
 wYEmKm3GSu0V4SAPxkWW+ooKusflCeqDoMIuooKt6kbP6BRj540veGw3Ww/m5YFr
 7pLQkTSP/tSjuGQIdBE1LOP5LBO8DZeC8Kiop9V0fzAW9hFSZbEq25WW0bPj8QQO
 zA4Z7yWlslvxcfY2BdJX3wD8klaINkl/8fDWZFFsBdfFX2VeLtm7Xfduw34BJpvU
 rYT3oWr6PhtkPAKR32SUcemSfeWgIVU41eSshzRz3kez1NngBUuLlSGGSEaKbes5
 pZVt6pYFFVByyf6MTHFEoQvafZfEw04JILZpo4R5V8iTHzom0kD3Py064sBiXEw2
 B6t+OW4qgcxGblpFkK2lD4kR2s1TPUs0ckVO6sAy1x8q60KKKjY=
 =vcbA
 -----END PGP SIGNATURE-----

Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - bpf:
        - allow bpf programs calling kernel functions (initially to
          reuse TCP congestion control implementations)
        - enable task local storage for tracing programs - remove the
          need to store per-task state in hash maps, and allow tracing
          programs access to task local storage previously added for
          BPF_LSM
        - add bpf_for_each_map_elem() helper, allowing programs to walk
          all map elements in a more robust and easier to verify fashion
        - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
          redirection
        - lpm: add support for batched ops in LPM trie
        - add BTF_KIND_FLOAT support - mostly to allow use of BTF on
          s390 which has floats in its headers files
        - improve BPF syscall documentation and extend the use of kdoc
          parsing scripts we already employ for bpf-helpers
        - libbpf, bpftool: support static linking of BPF ELF files
        - improve support for encapsulation of L2 packets

   - xdp: restructure redirect actions to avoid a runtime lookup,
     improving performance by 4-8% in microbenchmarks

   - xsk: build skb by page (aka generic zerocopy xmit) - improve
     performance of software AF_XDP path by 33% for devices which don't
     need headers in the linear skb part (e.g. virtio)

   - nexthop: resilient next-hop groups - improve path stability on
     next-hops group changes (incl. offload for mlxsw)

   - ipv6: segment routing: add support for IPv4 decapsulation

   - icmp: add support for RFC 8335 extended PROBE messages

   - inet: use bigger hash table for IP ID generation

   - tcp: deal better with delayed TX completions - make sure we don't
     give up on fast TCP retransmissions only because driver is slow in
     reporting that it completed transmitting the original

   - tcp: reorder tcp_congestion_ops for better cache locality

   - mptcp:
        - add sockopt support for common TCP options
        - add support for common TCP msg flags
        - include multiple address ids in RM_ADDR
        - add reset option support for resetting one subflow

   - udp: GRO L4 improvements - improve 'forward' / 'frag_list'
     co-existence with UDP tunnel GRO, allowing the first to take place
     correctly even for encapsulated UDP traffic

   - micro-optimize dev_gro_receive() and flow dissection, avoid
     retpoline overhead on VLAN and TEB GRO

   - use less memory for sysctls, add a new sysctl type, to allow using
     u8 instead of "int" and "long" and shrink networking sysctls

   - veth: allow GRO without XDP - this allows aggregating UDP packets
     before handing them off to routing, bridge, OvS, etc.

   - allow specifing ifindex when device is moved to another namespace

   - netfilter:
        - nft_socket: add support for cgroupsv2
        - nftables: add catch-all set element - special element used to
          define a default action in case normal lookup missed
        - use net_generic infra in many modules to avoid allocating
          per-ns memory unnecessarily

   - xps: improve the xps handling to avoid potential out-of-bound
     accesses and use-after-free when XPS change race with other
     re-configuration under traffic

   - add a config knob to turn off per-cpu netdev refcnt to catch
     underflows in testing

  Device APIs:

   - add WWAN subsystem to organize the WWAN interfaces better and
     hopefully start driving towards more unified and vendor-
     independent APIs

   - ethtool:
        - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
          support)
        - allow network drivers to dump arbitrary SFP EEPROM data,
          current offset+length API was a poor fit for modern SFP which
          define EEPROM in terms of pages (incl. mlx5 support)

   - act_police, flow_offload: add support for packet-per-second
     policing (incl. offload for nfp)

   - psample: add additional metadata attributes like transit delay for
     packets sampled from switch HW (and corresponding egress and
     policy-based sampling in the mlxsw driver)

   - dsa: improve support for sandwiched LAGs with bridge and DSA

   - netfilter:
        - flowtable: use direct xmit in topologies with IP forwarding,
          bridging, vlans etc.
        - nftables: counter hardware offload support

   - Bluetooth:
        - improvements for firmware download w/ Intel devices
        - add support for reading AOSP vendor capabilities
        - add support for virtio transport driver

   - mac80211:
        - allow concurrent monitor iface and ethernet rx decap
        - set priority and queue mapping for injected frames

   - phy: add support for Clause-45 PHY Loopback

   - pci/iov: add sysfs MSI-X vector assignment interface to distribute
     MSI-X resources to VFs (incl. mlx5 support)

  New hardware/drivers:

   - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
     Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
     interfaces.

   - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
     BCM63xx switches

   - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches

   - ath11k: support for QCN9074 a 802.11ax device

   - Bluetooth: Broadcom BCM4330 and BMC4334

   - phy: Marvell 88X2222 transceiver support

   - mdio: add BCM6368 MDIO mux bus controller

   - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips

   - mana: driver for Microsoft Azure Network Adapter (MANA)

   - Actions Semi Owl Ethernet MAC

   - can: driver for ETAS ES58X CAN/USB interfaces

  Pure driver changes:

   - add XDP support to: enetc, igc, stmmac

   - add AF_XDP support to: stmmac

   - virtio:
        - page_to_skb() use build_skb when there's sufficient tailroom
          (21% improvement for 1000B UDP frames)
        - support XDP even without dedicated Tx queues - share the Tx
          queues with the stack when necessary

   - mlx5:
        - flow rules: add support for mirroring with conntrack, matching
          on ICMP, GTP, flex filters and more
        - support packet sampling with flow offloads
        - persist uplink representor netdev across eswitch mode changes
        - allow coexistence of CQE compression and HW time-stamping
        - add ethtool extended link error state reporting

   - ice, iavf: support flow filters, UDP Segmentation Offload

   - dpaa2-switch:
        - move the driver out of staging
        - add spanning tree (STP) support
        - add rx copybreak support
        - add tc flower hardware offload on ingress traffic

   - ionic:
        - implement Rx page reuse
        - support HW PTP time-stamping

   - octeon: support TC hardware offloads - flower matching on ingress
     and egress ratelimitting.

   - stmmac:
        - add RX frame steering based on VLAN priority in tc flower
        - support frame preemption (FPE)
        - intel: add cross time-stamping freq difference adjustment

   - ocelot:
        - support forwarding of MRP frames in HW
        - support multiple bridges
        - support PTP Sync one-step timestamping

   - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
     learning, flooding etc.

   - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
     SC7280 SoCs)

   - mt7601u: enable TDLS support

   - mt76:
        - add support for 802.3 rx frames (mt7915/mt7615)
        - mt7915 flash pre-calibration support
        - mt7921/mt7663 runtime power management fixes"

* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
  net: selftest: fix build issue if INET is disabled
  net: netrom: nr_in: Remove redundant assignment to ns
  net: tun: Remove redundant assignment to ret
  net: phy: marvell: add downshift support for M88E1240
  net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
  net/sched: act_ct: Remove redundant ct get and check
  icmp: standardize naming of RFC 8335 PROBE constants
  bpf, selftests: Update array map tests for per-cpu batched ops
  bpf: Add batched ops support for percpu array
  bpf: Implement formatted output helpers with bstr_printf
  seq_file: Add a seq_bprintf function
  sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
  net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
  net: fix a concurrency bug in l2tp_tunnel_register()
  net/smc: Remove redundant assignment to rc
  mpls: Remove redundant assignment to err
  llc2: Remove redundant assignment to rc
  net/tls: Remove redundant initialization of record
  rds: Remove redundant assignment to nr_sig
  dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
  ...
2021-04-29 11:57:23 -07:00
..
Documentation perf tools: Fix documentation of verbose options 2021-03-06 16:54:26 -03:00
arch Perf events changes in this cycle were: 2021-04-28 13:03:44 -07:00
bench perf bench numa: Fix the condition checks for max number of NUMA nodes 2021-03-06 16:54:25 -03:00
examples/bpf perf bpf examples: Fix bpf.h header include directive in 5sec.c example 2021-01-15 16:31:46 -03:00
include/bpf perf bpf: Remove bpf/ subdir from bpf.h headers used to build bpf events 2020-02-18 10:13:28 -03:00
jvmti perf jvmti: Remove redundant jitdump line table entries 2020-05-29 16:51:38 -03:00
pmu-events perf vendor events arm64: Add JSON metrics for imx8mp DDR Perf 2021-02-18 10:09:23 -03:00
python tweewide: Fix most Shebang lines 2020-12-08 23:30:04 +09:00
scripts perf script: Add min, max to futex-contention output, in addition to avg 2020-09-23 12:58:53 -03:00
tests perf test: Change to use bash for daemon test 2021-03-26 08:56:57 -03:00
trace x86: Remove duplicate TSC DEADLINE MSR definitions 2021-03-08 11:05:20 +01:00
ui perf annotate: Do not jump after 'k' is pressed 2021-02-17 15:25:18 -03:00
util - turn the stack canary into a normal __percpu variable on 32-bit which 2021-04-27 17:45:09 -07:00
.gitignore .gitignore: add SPDX License Identifier 2020-03-25 11:50:48 +01:00
Build perf daemon: Add daemon command 2021-02-09 15:42:57 -03:00
CREDITS
MANIFEST scripts/bpf: Abstract eBPF API target parameter 2021-03-04 18:39:45 -08:00
Makefile tools: Let O= makes handle a relative path with -C option 2020-03-06 17:08:28 -03:00
Makefile.config perf build: Support build BPF skeletons with perf 2021-01-15 15:49:07 -03:00
Makefile.perf perf build: Fix ccache usage in $(CC) when generating arch errno table 2021-03-06 16:54:26 -03:00
builtin-annotate.c perf evlist: Use the right prefix for 'struct evlist' event group methods 2020-11-30 15:00:12 -03:00
builtin-bench.c perf bench: Add build-id injection benchmark 2020-10-13 10:59:42 -03:00
builtin-buildid-cache.c perf buildid-cache: Add --debuginfod option to specify a server to fetch debug files 2020-12-28 12:20:39 -03:00
builtin-buildid-list.c perf buildid-list: Add support for mmap2's buildid events 2020-12-28 12:23:09 -03:00
builtin-c2c.c perf c2c: Support data block and addr block 2021-02-08 16:25:00 -03:00
builtin-config.c perf tools: Remove util.h from where it is not needed 2019-09-20 09:19:20 -03:00
builtin-daemon.c perf daemon: Return from kill functions 2021-03-24 10:24:00 -03:00
builtin-data.c perf data: Add support to store time of day in CTF data conversion 2020-08-06 09:43:37 -03:00
builtin-diff.c perf diff: Don't crash on freeing errno-session on the error path 2021-03-06 16:54:25 -03:00
builtin-evlist.c perf evlist: Support pipe mode display 2020-12-17 14:36:17 -03:00
builtin-ftrace.c perf ftrace: Fix access to pid in array when setting a pid filter 2021-04-23 15:58:10 -03:00
builtin-help.c perf debug: Remove needless include directives from debug.h 2019-08-31 19:10:19 -03:00
builtin-inject.c perf inject: Fix repipe usage 2021-04-05 10:15:51 -03:00
builtin-kallsyms.c perf dsos: Move the dsos struct and its methods to separate source files 2019-08-31 22:24:10 -03:00
builtin-kmem.c perf evlist: Use the right prefix for 'struct evlist' 'find' methods 2020-11-30 09:48:07 -03:00
builtin-kvm.c perf evlist: Use the right prefix for 'struct evlist' mmap pages parsing method 2020-11-30 15:15:30 -03:00
builtin-list.c perf list: Remove dead code in argument check 2020-09-09 11:12:10 -03:00
builtin-lock.c perf lock: Don't free "lock_seq_stat" if read_count isn't zero 2020-11-12 17:55:41 -03:00
builtin-mem.c perf tools: Support data block and addr block 2021-02-08 16:25:00 -03:00
builtin-probe.c perf probe: Do not show the skipped events 2020-05-28 10:03:24 -03:00
builtin-record.c perf auxtrace: Automatically group aux-output events 2021-02-18 16:11:19 -03:00
builtin-report.c perf report: Support --header-only for pipe mode 2020-12-17 14:36:17 -03:00
builtin-sched.c perf evlist: Use the right prefix for 'struct evlist' 'find' methods 2020-11-30 09:48:07 -03:00
builtin-script.c perf script: Add branch types for VM-Entry and VM-Exit 2021-02-18 16:12:51 -03:00
builtin-stat.c perf stat: Support L2 Topdown events 2021-02-08 16:25:00 -03:00
builtin-timechart.c perf tools: Replace zero-length array with flexible-array 2020-05-28 10:03:27 -03:00
builtin-top.c perf evlist: Use the right prefix for 'struct evlist' mmap pages parsing method 2020-11-30 15:15:30 -03:00
builtin-trace.c perf trace: Fix race in signal handling 2021-03-06 16:54:32 -03:00
builtin-version.c perf version: Add a feature for libpfm4 2020-11-04 09:42:40 -03:00
builtin.h perf daemon: Add daemon command 2021-02-09 15:42:57 -03:00
check-headers.sh x86/insn: Add a __ignore_sync_check__ marker 2021-03-15 11:00:57 +01:00
command-list.txt perf daemon: Add daemon command 2021-02-09 15:42:57 -03:00
design.txt perf tools: Support CAP_PERFMON capability 2020-04-16 12:19:08 -03:00
perf-archive.sh perf archive: Fix filtering of empty build-ids 2021-03-06 16:54:31 -03:00
perf-completion.sh
perf-read-vdso.c
perf-sys.h perf tests: Call test_attr__open() directly 2020-09-10 11:55:37 -03:00
perf-with-kcore.sh Merge branch 'x86/cpu' into perf/core, to pick up dependent changes 2019-06-17 12:29:16 +02:00
perf.c perf daemon: Add daemon command 2021-02-09 15:42:57 -03:00
perf.h perf time-utils: Adopt rdclock() from perf.h 2019-08-29 17:38:32 -03:00