270 lines
7.6 KiB
C
270 lines
7.6 KiB
C
/*
|
|
* ads7828.c - lm_sensors driver for ads7828 12-bit 8-channel ADC
|
|
* (C) 2007 EADS Astrium
|
|
*
|
|
* This driver is based on the lm75 and other lm_sensors/hwmon drivers
|
|
*
|
|
* Written by Steve Hardy <shardy@redhat.com>
|
|
*
|
|
* Datasheet available at: http://focus.ti.com/lit/ds/symlink/ads7828.pdf
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mutex.h>
|
|
|
|
/* The ADS7828 registers */
|
|
#define ADS7828_NCH 8 /* 8 channels of 12-bit A-D supported */
|
|
#define ADS7828_CMD_SD_SE 0x80 /* Single ended inputs */
|
|
#define ADS7828_CMD_SD_DIFF 0x00 /* Differential inputs */
|
|
#define ADS7828_CMD_PD0 0x0 /* Power Down between A-D conversions */
|
|
#define ADS7828_CMD_PD1 0x04 /* Internal ref OFF && A-D ON */
|
|
#define ADS7828_CMD_PD2 0x08 /* Internal ref ON && A-D OFF */
|
|
#define ADS7828_CMD_PD3 0x0C /* Internal ref ON && A-D ON */
|
|
#define ADS7828_INT_VREF_MV 2500 /* Internal vref is 2.5V, 2500mV */
|
|
|
|
/* Addresses to scan */
|
|
static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b,
|
|
I2C_CLIENT_END };
|
|
|
|
/* Module parameters */
|
|
static bool se_input = 1; /* Default is SE, 0 == diff */
|
|
static bool int_vref = 1; /* Default is internal ref ON */
|
|
static int vref_mv = ADS7828_INT_VREF_MV; /* set if vref != 2.5V */
|
|
module_param(se_input, bool, S_IRUGO);
|
|
module_param(int_vref, bool, S_IRUGO);
|
|
module_param(vref_mv, int, S_IRUGO);
|
|
|
|
/* Global Variables */
|
|
static u8 ads7828_cmd_byte; /* cmd byte without channel bits */
|
|
static unsigned int ads7828_lsb_resol; /* resolution of the ADC sample lsb */
|
|
|
|
/* Each client has this additional data */
|
|
struct ads7828_data {
|
|
struct device *hwmon_dev;
|
|
struct mutex update_lock; /* mutex protect updates */
|
|
char valid; /* !=0 if following fields are valid */
|
|
unsigned long last_updated; /* In jiffies */
|
|
u16 adc_input[ADS7828_NCH]; /* ADS7828_NCH 12-bit samples */
|
|
};
|
|
|
|
/* Function declaration - necessary due to function dependencies */
|
|
static int ads7828_detect(struct i2c_client *client,
|
|
struct i2c_board_info *info);
|
|
static int ads7828_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id);
|
|
|
|
static inline u8 channel_cmd_byte(int ch)
|
|
{
|
|
/* cmd byte C2,C1,C0 - see datasheet */
|
|
u8 cmd = (((ch>>1) | (ch&0x01)<<2)<<4);
|
|
cmd |= ads7828_cmd_byte;
|
|
return cmd;
|
|
}
|
|
|
|
/* Update data for the device (all 8 channels) */
|
|
static struct ads7828_data *ads7828_update_device(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct ads7828_data *data = i2c_get_clientdata(client);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|
|
|| !data->valid) {
|
|
unsigned int ch;
|
|
dev_dbg(&client->dev, "Starting ads7828 update\n");
|
|
|
|
for (ch = 0; ch < ADS7828_NCH; ch++) {
|
|
u8 cmd = channel_cmd_byte(ch);
|
|
data->adc_input[ch] =
|
|
i2c_smbus_read_word_swapped(client, cmd);
|
|
}
|
|
data->last_updated = jiffies;
|
|
data->valid = 1;
|
|
}
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return data;
|
|
}
|
|
|
|
/* sysfs callback function */
|
|
static ssize_t show_in(struct device *dev, struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
struct ads7828_data *data = ads7828_update_device(dev);
|
|
/* Print value (in mV as specified in sysfs-interface documentation) */
|
|
return sprintf(buf, "%d\n", (data->adc_input[attr->index] *
|
|
ads7828_lsb_resol)/1000);
|
|
}
|
|
|
|
#define in_reg(offset)\
|
|
static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in,\
|
|
NULL, offset)
|
|
|
|
in_reg(0);
|
|
in_reg(1);
|
|
in_reg(2);
|
|
in_reg(3);
|
|
in_reg(4);
|
|
in_reg(5);
|
|
in_reg(6);
|
|
in_reg(7);
|
|
|
|
static struct attribute *ads7828_attributes[] = {
|
|
&sensor_dev_attr_in0_input.dev_attr.attr,
|
|
&sensor_dev_attr_in1_input.dev_attr.attr,
|
|
&sensor_dev_attr_in2_input.dev_attr.attr,
|
|
&sensor_dev_attr_in3_input.dev_attr.attr,
|
|
&sensor_dev_attr_in4_input.dev_attr.attr,
|
|
&sensor_dev_attr_in5_input.dev_attr.attr,
|
|
&sensor_dev_attr_in6_input.dev_attr.attr,
|
|
&sensor_dev_attr_in7_input.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group ads7828_group = {
|
|
.attrs = ads7828_attributes,
|
|
};
|
|
|
|
static int ads7828_remove(struct i2c_client *client)
|
|
{
|
|
struct ads7828_data *data = i2c_get_clientdata(client);
|
|
hwmon_device_unregister(data->hwmon_dev);
|
|
sysfs_remove_group(&client->dev.kobj, &ads7828_group);
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id ads7828_id[] = {
|
|
{ "ads7828", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ads7828_id);
|
|
|
|
/* This is the driver that will be inserted */
|
|
static struct i2c_driver ads7828_driver = {
|
|
.class = I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = "ads7828",
|
|
},
|
|
.probe = ads7828_probe,
|
|
.remove = ads7828_remove,
|
|
.id_table = ads7828_id,
|
|
.detect = ads7828_detect,
|
|
.address_list = normal_i2c,
|
|
};
|
|
|
|
/* Return 0 if detection is successful, -ENODEV otherwise */
|
|
static int ads7828_detect(struct i2c_client *client,
|
|
struct i2c_board_info *info)
|
|
{
|
|
struct i2c_adapter *adapter = client->adapter;
|
|
int ch;
|
|
|
|
/* Check we have a valid client */
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_WORD_DATA))
|
|
return -ENODEV;
|
|
|
|
/*
|
|
* Now, we do the remaining detection. There is no identification
|
|
* dedicated register so attempt to sanity check using knowledge of
|
|
* the chip
|
|
* - Read from the 8 channel addresses
|
|
* - Check the top 4 bits of each result are not set (12 data bits)
|
|
*/
|
|
for (ch = 0; ch < ADS7828_NCH; ch++) {
|
|
u16 in_data;
|
|
u8 cmd = channel_cmd_byte(ch);
|
|
in_data = i2c_smbus_read_word_swapped(client, cmd);
|
|
if (in_data & 0xF000) {
|
|
pr_debug("%s : Doesn't look like an ads7828 device\n",
|
|
__func__);
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
strlcpy(info->type, "ads7828", I2C_NAME_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ads7828_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct ads7828_data *data;
|
|
int err;
|
|
|
|
data = devm_kzalloc(&client->dev, sizeof(struct ads7828_data),
|
|
GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(client, data);
|
|
mutex_init(&data->update_lock);
|
|
|
|
/* Register sysfs hooks */
|
|
err = sysfs_create_group(&client->dev.kobj, &ads7828_group);
|
|
if (err)
|
|
return err;
|
|
|
|
data->hwmon_dev = hwmon_device_register(&client->dev);
|
|
if (IS_ERR(data->hwmon_dev)) {
|
|
err = PTR_ERR(data->hwmon_dev);
|
|
goto exit_remove;
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_remove:
|
|
sysfs_remove_group(&client->dev.kobj, &ads7828_group);
|
|
return err;
|
|
}
|
|
|
|
static int __init sensors_ads7828_init(void)
|
|
{
|
|
/* Initialize the command byte according to module parameters */
|
|
ads7828_cmd_byte = se_input ?
|
|
ADS7828_CMD_SD_SE : ADS7828_CMD_SD_DIFF;
|
|
ads7828_cmd_byte |= int_vref ?
|
|
ADS7828_CMD_PD3 : ADS7828_CMD_PD1;
|
|
|
|
/* Calculate the LSB resolution */
|
|
ads7828_lsb_resol = (vref_mv*1000)/4096;
|
|
|
|
return i2c_add_driver(&ads7828_driver);
|
|
}
|
|
|
|
static void __exit sensors_ads7828_exit(void)
|
|
{
|
|
i2c_del_driver(&ads7828_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Steve Hardy <shardy@redhat.com>");
|
|
MODULE_DESCRIPTION("ADS7828 driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(sensors_ads7828_init);
|
|
module_exit(sensors_ads7828_exit);
|