580 lines
14 KiB
C
580 lines
14 KiB
C
/*
|
|
* USB SD Host Controller (USHC) controller driver.
|
|
*
|
|
* Copyright (C) 2010 Cambridge Silicon Radio Ltd.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or (at
|
|
* your option) any later version.
|
|
*
|
|
* Notes:
|
|
* - Only version 2 devices are supported.
|
|
* - Version 2 devices only support SDIO cards/devices (R2 response is
|
|
* unsupported).
|
|
*
|
|
* References:
|
|
* [USHC] USB SD Host Controller specification (CS-118793-SP)
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/mmc/host.h>
|
|
|
|
enum ushc_request {
|
|
USHC_GET_CAPS = 0x00,
|
|
USHC_HOST_CTRL = 0x01,
|
|
USHC_PWR_CTRL = 0x02,
|
|
USHC_CLK_FREQ = 0x03,
|
|
USHC_EXEC_CMD = 0x04,
|
|
USHC_READ_RESP = 0x05,
|
|
USHC_RESET = 0x06,
|
|
};
|
|
|
|
enum ushc_request_type {
|
|
USHC_GET_CAPS_TYPE = USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
USHC_HOST_CTRL_TYPE = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
USHC_PWR_CTRL_TYPE = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
USHC_CLK_FREQ_TYPE = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
USHC_EXEC_CMD_TYPE = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
USHC_READ_RESP_TYPE = USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
USHC_RESET_TYPE = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
};
|
|
|
|
#define USHC_GET_CAPS_VERSION_MASK 0xff
|
|
#define USHC_GET_CAPS_3V3 (1 << 8)
|
|
#define USHC_GET_CAPS_3V0 (1 << 9)
|
|
#define USHC_GET_CAPS_1V8 (1 << 10)
|
|
#define USHC_GET_CAPS_HIGH_SPD (1 << 16)
|
|
|
|
#define USHC_HOST_CTRL_4BIT (1 << 1)
|
|
#define USHC_HOST_CTRL_HIGH_SPD (1 << 0)
|
|
|
|
#define USHC_PWR_CTRL_OFF 0x00
|
|
#define USHC_PWR_CTRL_3V3 0x01
|
|
#define USHC_PWR_CTRL_3V0 0x02
|
|
#define USHC_PWR_CTRL_1V8 0x03
|
|
|
|
#define USHC_READ_RESP_BUSY (1 << 4)
|
|
#define USHC_READ_RESP_ERR_TIMEOUT (1 << 3)
|
|
#define USHC_READ_RESP_ERR_CRC (1 << 2)
|
|
#define USHC_READ_RESP_ERR_DAT (1 << 1)
|
|
#define USHC_READ_RESP_ERR_CMD (1 << 0)
|
|
#define USHC_READ_RESP_ERR_MASK 0x0f
|
|
|
|
struct ushc_cbw {
|
|
__u8 signature;
|
|
__u8 cmd_idx;
|
|
__le16 block_size;
|
|
__le32 arg;
|
|
} __attribute__((packed));
|
|
|
|
#define USHC_CBW_SIGNATURE 'C'
|
|
|
|
struct ushc_csw {
|
|
__u8 signature;
|
|
__u8 status;
|
|
__le32 response;
|
|
} __attribute__((packed));
|
|
|
|
#define USHC_CSW_SIGNATURE 'S'
|
|
|
|
struct ushc_int_data {
|
|
u8 status;
|
|
u8 reserved[3];
|
|
};
|
|
|
|
#define USHC_INT_STATUS_SDIO_INT (1 << 1)
|
|
#define USHC_INT_STATUS_CARD_PRESENT (1 << 0)
|
|
|
|
|
|
struct ushc_data {
|
|
struct usb_device *usb_dev;
|
|
struct mmc_host *mmc;
|
|
|
|
struct urb *int_urb;
|
|
struct ushc_int_data *int_data;
|
|
|
|
struct urb *cbw_urb;
|
|
struct ushc_cbw *cbw;
|
|
|
|
struct urb *data_urb;
|
|
|
|
struct urb *csw_urb;
|
|
struct ushc_csw *csw;
|
|
|
|
spinlock_t lock;
|
|
struct mmc_request *current_req;
|
|
u32 caps;
|
|
u16 host_ctrl;
|
|
unsigned long flags;
|
|
u8 last_status;
|
|
int clock_freq;
|
|
};
|
|
|
|
#define DISCONNECTED 0
|
|
#define INT_EN 1
|
|
#define IGNORE_NEXT_INT 2
|
|
|
|
static void data_callback(struct urb *urb);
|
|
|
|
static int ushc_hw_reset(struct ushc_data *ushc)
|
|
{
|
|
return usb_control_msg(ushc->usb_dev, usb_sndctrlpipe(ushc->usb_dev, 0),
|
|
USHC_RESET, USHC_RESET_TYPE,
|
|
0, 0, NULL, 0, 100);
|
|
}
|
|
|
|
static int ushc_hw_get_caps(struct ushc_data *ushc)
|
|
{
|
|
int ret;
|
|
int version;
|
|
|
|
ret = usb_control_msg(ushc->usb_dev, usb_rcvctrlpipe(ushc->usb_dev, 0),
|
|
USHC_GET_CAPS, USHC_GET_CAPS_TYPE,
|
|
0, 0, &ushc->caps, sizeof(ushc->caps), 100);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ushc->caps = le32_to_cpu(ushc->caps);
|
|
|
|
version = ushc->caps & USHC_GET_CAPS_VERSION_MASK;
|
|
if (version != 0x02) {
|
|
dev_err(&ushc->usb_dev->dev, "controller version %d is not supported\n", version);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ushc_hw_set_host_ctrl(struct ushc_data *ushc, u16 mask, u16 val)
|
|
{
|
|
u16 host_ctrl;
|
|
int ret;
|
|
|
|
host_ctrl = (ushc->host_ctrl & ~mask) | val;
|
|
ret = usb_control_msg(ushc->usb_dev, usb_sndctrlpipe(ushc->usb_dev, 0),
|
|
USHC_HOST_CTRL, USHC_HOST_CTRL_TYPE,
|
|
host_ctrl, 0, NULL, 0, 100);
|
|
if (ret < 0)
|
|
return ret;
|
|
ushc->host_ctrl = host_ctrl;
|
|
return 0;
|
|
}
|
|
|
|
static void int_callback(struct urb *urb)
|
|
{
|
|
struct ushc_data *ushc = urb->context;
|
|
u8 status, last_status;
|
|
|
|
if (urb->status < 0)
|
|
return;
|
|
|
|
status = ushc->int_data->status;
|
|
last_status = ushc->last_status;
|
|
ushc->last_status = status;
|
|
|
|
/*
|
|
* Ignore the card interrupt status on interrupt transfers that
|
|
* were submitted while card interrupts where disabled.
|
|
*
|
|
* This avoid occasional spurious interrupts when enabling
|
|
* interrupts immediately after clearing the source on the card.
|
|
*/
|
|
|
|
if (!test_and_clear_bit(IGNORE_NEXT_INT, &ushc->flags)
|
|
&& test_bit(INT_EN, &ushc->flags)
|
|
&& status & USHC_INT_STATUS_SDIO_INT) {
|
|
mmc_signal_sdio_irq(ushc->mmc);
|
|
}
|
|
|
|
if ((status ^ last_status) & USHC_INT_STATUS_CARD_PRESENT)
|
|
mmc_detect_change(ushc->mmc, msecs_to_jiffies(100));
|
|
|
|
if (!test_bit(INT_EN, &ushc->flags))
|
|
set_bit(IGNORE_NEXT_INT, &ushc->flags);
|
|
usb_submit_urb(ushc->int_urb, GFP_ATOMIC);
|
|
}
|
|
|
|
static void cbw_callback(struct urb *urb)
|
|
{
|
|
struct ushc_data *ushc = urb->context;
|
|
|
|
if (urb->status != 0) {
|
|
usb_unlink_urb(ushc->data_urb);
|
|
usb_unlink_urb(ushc->csw_urb);
|
|
}
|
|
}
|
|
|
|
static void data_callback(struct urb *urb)
|
|
{
|
|
struct ushc_data *ushc = urb->context;
|
|
|
|
if (urb->status != 0)
|
|
usb_unlink_urb(ushc->csw_urb);
|
|
}
|
|
|
|
static void csw_callback(struct urb *urb)
|
|
{
|
|
struct ushc_data *ushc = urb->context;
|
|
struct mmc_request *req = ushc->current_req;
|
|
int status;
|
|
|
|
status = ushc->csw->status;
|
|
|
|
if (urb->status != 0) {
|
|
req->cmd->error = urb->status;
|
|
} else if (status & USHC_READ_RESP_ERR_CMD) {
|
|
if (status & USHC_READ_RESP_ERR_CRC)
|
|
req->cmd->error = -EIO;
|
|
else
|
|
req->cmd->error = -ETIMEDOUT;
|
|
}
|
|
if (req->data) {
|
|
if (status & USHC_READ_RESP_ERR_DAT) {
|
|
if (status & USHC_READ_RESP_ERR_CRC)
|
|
req->data->error = -EIO;
|
|
else
|
|
req->data->error = -ETIMEDOUT;
|
|
req->data->bytes_xfered = 0;
|
|
} else {
|
|
req->data->bytes_xfered = req->data->blksz * req->data->blocks;
|
|
}
|
|
}
|
|
|
|
req->cmd->resp[0] = le32_to_cpu(ushc->csw->response);
|
|
|
|
mmc_request_done(ushc->mmc, req);
|
|
}
|
|
|
|
static void ushc_request(struct mmc_host *mmc, struct mmc_request *req)
|
|
{
|
|
struct ushc_data *ushc = mmc_priv(mmc);
|
|
int ret;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ushc->lock, flags);
|
|
|
|
if (test_bit(DISCONNECTED, &ushc->flags)) {
|
|
ret = -ENODEV;
|
|
goto out;
|
|
}
|
|
|
|
/* Version 2 firmware doesn't support the R2 response format. */
|
|
if (req->cmd->flags & MMC_RSP_136) {
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
/* The Astoria's data FIFOs don't work with clock speeds < 5MHz so
|
|
limit commands with data to 6MHz or more. */
|
|
if (req->data && ushc->clock_freq < 6000000) {
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
ushc->current_req = req;
|
|
|
|
/* Start cmd with CBW. */
|
|
ushc->cbw->cmd_idx = cpu_to_le16(req->cmd->opcode);
|
|
if (req->data)
|
|
ushc->cbw->block_size = cpu_to_le16(req->data->blksz);
|
|
else
|
|
ushc->cbw->block_size = 0;
|
|
ushc->cbw->arg = cpu_to_le32(req->cmd->arg);
|
|
|
|
ret = usb_submit_urb(ushc->cbw_urb, GFP_ATOMIC);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
/* Submit data (if any). */
|
|
if (req->data) {
|
|
struct mmc_data *data = req->data;
|
|
int pipe;
|
|
|
|
if (data->flags & MMC_DATA_READ)
|
|
pipe = usb_rcvbulkpipe(ushc->usb_dev, 6);
|
|
else
|
|
pipe = usb_sndbulkpipe(ushc->usb_dev, 2);
|
|
|
|
usb_fill_bulk_urb(ushc->data_urb, ushc->usb_dev, pipe,
|
|
sg_virt(data->sg), data->sg->length,
|
|
data_callback, ushc);
|
|
ret = usb_submit_urb(ushc->data_urb, GFP_ATOMIC);
|
|
if (ret < 0)
|
|
goto out;
|
|
}
|
|
|
|
/* Submit CSW. */
|
|
ret = usb_submit_urb(ushc->csw_urb, GFP_ATOMIC);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
out:
|
|
spin_unlock_irqrestore(&ushc->lock, flags);
|
|
if (ret < 0) {
|
|
usb_unlink_urb(ushc->cbw_urb);
|
|
usb_unlink_urb(ushc->data_urb);
|
|
req->cmd->error = ret;
|
|
mmc_request_done(mmc, req);
|
|
}
|
|
}
|
|
|
|
static int ushc_set_power(struct ushc_data *ushc, unsigned char power_mode)
|
|
{
|
|
u16 voltage;
|
|
|
|
switch (power_mode) {
|
|
case MMC_POWER_OFF:
|
|
voltage = USHC_PWR_CTRL_OFF;
|
|
break;
|
|
case MMC_POWER_UP:
|
|
case MMC_POWER_ON:
|
|
voltage = USHC_PWR_CTRL_3V3;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return usb_control_msg(ushc->usb_dev, usb_sndctrlpipe(ushc->usb_dev, 0),
|
|
USHC_PWR_CTRL, USHC_PWR_CTRL_TYPE,
|
|
voltage, 0, NULL, 0, 100);
|
|
}
|
|
|
|
static int ushc_set_bus_width(struct ushc_data *ushc, int bus_width)
|
|
{
|
|
return ushc_hw_set_host_ctrl(ushc, USHC_HOST_CTRL_4BIT,
|
|
bus_width == 4 ? USHC_HOST_CTRL_4BIT : 0);
|
|
}
|
|
|
|
static int ushc_set_bus_freq(struct ushc_data *ushc, int clk, bool enable_hs)
|
|
{
|
|
int ret;
|
|
|
|
/* Hardware can't detect interrupts while the clock is off. */
|
|
if (clk == 0)
|
|
clk = 400000;
|
|
|
|
ret = ushc_hw_set_host_ctrl(ushc, USHC_HOST_CTRL_HIGH_SPD,
|
|
enable_hs ? USHC_HOST_CTRL_HIGH_SPD : 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = usb_control_msg(ushc->usb_dev, usb_sndctrlpipe(ushc->usb_dev, 0),
|
|
USHC_CLK_FREQ, USHC_CLK_FREQ_TYPE,
|
|
clk & 0xffff, (clk >> 16) & 0xffff, NULL, 0, 100);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ushc->clock_freq = clk;
|
|
return 0;
|
|
}
|
|
|
|
static void ushc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
{
|
|
struct ushc_data *ushc = mmc_priv(mmc);
|
|
|
|
ushc_set_power(ushc, ios->power_mode);
|
|
ushc_set_bus_width(ushc, 1 << ios->bus_width);
|
|
ushc_set_bus_freq(ushc, ios->clock, ios->timing == MMC_TIMING_SD_HS);
|
|
}
|
|
|
|
static int ushc_get_cd(struct mmc_host *mmc)
|
|
{
|
|
struct ushc_data *ushc = mmc_priv(mmc);
|
|
|
|
return !!(ushc->last_status & USHC_INT_STATUS_CARD_PRESENT);
|
|
}
|
|
|
|
static void ushc_enable_sdio_irq(struct mmc_host *mmc, int enable)
|
|
{
|
|
struct ushc_data *ushc = mmc_priv(mmc);
|
|
|
|
if (enable)
|
|
set_bit(INT_EN, &ushc->flags);
|
|
else
|
|
clear_bit(INT_EN, &ushc->flags);
|
|
}
|
|
|
|
static void ushc_clean_up(struct ushc_data *ushc)
|
|
{
|
|
usb_free_urb(ushc->int_urb);
|
|
usb_free_urb(ushc->csw_urb);
|
|
usb_free_urb(ushc->data_urb);
|
|
usb_free_urb(ushc->cbw_urb);
|
|
|
|
kfree(ushc->int_data);
|
|
kfree(ushc->cbw);
|
|
kfree(ushc->csw);
|
|
|
|
mmc_free_host(ushc->mmc);
|
|
}
|
|
|
|
static const struct mmc_host_ops ushc_ops = {
|
|
.request = ushc_request,
|
|
.set_ios = ushc_set_ios,
|
|
.get_cd = ushc_get_cd,
|
|
.enable_sdio_irq = ushc_enable_sdio_irq,
|
|
};
|
|
|
|
static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id)
|
|
{
|
|
struct usb_device *usb_dev = interface_to_usbdev(intf);
|
|
struct mmc_host *mmc;
|
|
struct ushc_data *ushc;
|
|
int ret;
|
|
|
|
mmc = mmc_alloc_host(sizeof(struct ushc_data), &intf->dev);
|
|
if (mmc == NULL)
|
|
return -ENOMEM;
|
|
ushc = mmc_priv(mmc);
|
|
usb_set_intfdata(intf, ushc);
|
|
|
|
ushc->usb_dev = usb_dev;
|
|
ushc->mmc = mmc;
|
|
|
|
spin_lock_init(&ushc->lock);
|
|
|
|
ret = ushc_hw_reset(ushc);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
/* Read capabilities. */
|
|
ret = ushc_hw_get_caps(ushc);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
mmc->ops = &ushc_ops;
|
|
|
|
mmc->f_min = 400000;
|
|
mmc->f_max = 50000000;
|
|
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
|
|
mmc->caps |= (ushc->caps & USHC_GET_CAPS_HIGH_SPD) ? MMC_CAP_SD_HIGHSPEED : 0;
|
|
|
|
mmc->max_seg_size = 512*511;
|
|
mmc->max_segs = 1;
|
|
mmc->max_req_size = 512*511;
|
|
mmc->max_blk_size = 512;
|
|
mmc->max_blk_count = 511;
|
|
|
|
ushc->int_urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (ushc->int_urb == NULL) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
ushc->int_data = kzalloc(sizeof(struct ushc_int_data), GFP_KERNEL);
|
|
if (ushc->int_data == NULL) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
usb_fill_int_urb(ushc->int_urb, ushc->usb_dev,
|
|
usb_rcvintpipe(usb_dev,
|
|
intf->cur_altsetting->endpoint[0].desc.bEndpointAddress),
|
|
ushc->int_data, sizeof(struct ushc_int_data),
|
|
int_callback, ushc,
|
|
intf->cur_altsetting->endpoint[0].desc.bInterval);
|
|
|
|
ushc->cbw_urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (ushc->cbw_urb == NULL) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
ushc->cbw = kzalloc(sizeof(struct ushc_cbw), GFP_KERNEL);
|
|
if (ushc->cbw == NULL) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
ushc->cbw->signature = USHC_CBW_SIGNATURE;
|
|
|
|
usb_fill_bulk_urb(ushc->cbw_urb, ushc->usb_dev, usb_sndbulkpipe(usb_dev, 2),
|
|
ushc->cbw, sizeof(struct ushc_cbw),
|
|
cbw_callback, ushc);
|
|
|
|
ushc->data_urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (ushc->data_urb == NULL) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
ushc->csw_urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (ushc->csw_urb == NULL) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
ushc->csw = kzalloc(sizeof(struct ushc_cbw), GFP_KERNEL);
|
|
if (ushc->csw == NULL) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
usb_fill_bulk_urb(ushc->csw_urb, ushc->usb_dev, usb_rcvbulkpipe(usb_dev, 6),
|
|
ushc->csw, sizeof(struct ushc_csw),
|
|
csw_callback, ushc);
|
|
|
|
ret = mmc_add_host(ushc->mmc);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = usb_submit_urb(ushc->int_urb, GFP_KERNEL);
|
|
if (ret < 0) {
|
|
mmc_remove_host(ushc->mmc);
|
|
goto err;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
ushc_clean_up(ushc);
|
|
return ret;
|
|
}
|
|
|
|
static void ushc_disconnect(struct usb_interface *intf)
|
|
{
|
|
struct ushc_data *ushc = usb_get_intfdata(intf);
|
|
|
|
spin_lock_irq(&ushc->lock);
|
|
set_bit(DISCONNECTED, &ushc->flags);
|
|
spin_unlock_irq(&ushc->lock);
|
|
|
|
usb_kill_urb(ushc->int_urb);
|
|
usb_kill_urb(ushc->cbw_urb);
|
|
usb_kill_urb(ushc->data_urb);
|
|
usb_kill_urb(ushc->csw_urb);
|
|
|
|
mmc_remove_host(ushc->mmc);
|
|
|
|
ushc_clean_up(ushc);
|
|
}
|
|
|
|
static struct usb_device_id ushc_id_table[] = {
|
|
/* CSR USB SD Host Controller */
|
|
{ USB_DEVICE(0x0a12, 0x5d10) },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, ushc_id_table);
|
|
|
|
static struct usb_driver ushc_driver = {
|
|
.name = "ushc",
|
|
.id_table = ushc_id_table,
|
|
.probe = ushc_probe,
|
|
.disconnect = ushc_disconnect,
|
|
};
|
|
|
|
static int __init ushc_init(void)
|
|
{
|
|
return usb_register(&ushc_driver);
|
|
}
|
|
module_init(ushc_init);
|
|
|
|
static void __exit ushc_exit(void)
|
|
{
|
|
usb_deregister(&ushc_driver);
|
|
}
|
|
module_exit(ushc_exit);
|
|
|
|
MODULE_DESCRIPTION("USB SD Host Controller driver");
|
|
MODULE_AUTHOR("David Vrabel <david.vrabel@csr.com>");
|
|
MODULE_LICENSE("GPL");
|