43 lines
1.1 KiB
Plaintext
43 lines
1.1 KiB
Plaintext
Qualcomm PCIe2 PHY controller
|
|
=============================
|
|
|
|
The Qualcomm PCIe2 PHY is a Synopsys based phy found in a number of Qualcomm
|
|
platforms.
|
|
|
|
Required properties:
|
|
- compatible: compatible list, should be:
|
|
"qcom,qcs404-pcie2-phy", "qcom,pcie2-phy"
|
|
|
|
- reg: offset and length of the PHY register set.
|
|
- #phy-cells: must be 0.
|
|
|
|
- clocks: a clock-specifier pair for the "pipe" clock
|
|
|
|
- vdda-vp-supply: phandle to low voltage regulator
|
|
- vdda-vph-supply: phandle to high voltage regulator
|
|
|
|
- resets: reset-specifier pairs for the "phy" and "pipe" resets
|
|
- reset-names: list of resets, should contain:
|
|
"phy" and "pipe"
|
|
|
|
- clock-output-names: name of the outgoing clock signal from the PHY PLL
|
|
- #clock-cells: must be 0
|
|
|
|
Example:
|
|
phy@7786000 {
|
|
compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy";
|
|
reg = <0x07786000 0xb8>;
|
|
|
|
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
|
|
resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>,
|
|
<&gcc GCC_PCIE_0_PIPE_ARES>;
|
|
reset-names = "phy", "pipe";
|
|
|
|
vdda-vp-supply = <&vreg_l3_1p05>;
|
|
vdda-vph-supply = <&vreg_l5_1p8>;
|
|
|
|
clock-output-names = "pcie_0_pipe_clk";
|
|
#clock-cells = <0>;
|
|
#phy-cells = <0>;
|
|
};
|