545 lines
18 KiB
Plaintext
545 lines
18 KiB
Plaintext
# SPDX-License-Identifier: GPL-2.0
|
|
#
|
|
# Character device configuration
|
|
#
|
|
|
|
menu "Character devices"
|
|
|
|
source "drivers/tty/Kconfig"
|
|
|
|
config DEVMEM
|
|
bool "/dev/mem virtual device support"
|
|
default y
|
|
help
|
|
Say Y here if you want to support the /dev/mem device.
|
|
The /dev/mem device is used to access areas of physical
|
|
memory.
|
|
When in doubt, say "Y".
|
|
|
|
config DEVKMEM
|
|
bool "/dev/kmem virtual device support"
|
|
# On arm64, VMALLOC_START < PAGE_OFFSET, which confuses kmem read/write
|
|
depends on !ARM64
|
|
help
|
|
Say Y here if you want to support the /dev/kmem device. The
|
|
/dev/kmem device is rarely used, but can be used for certain
|
|
kind of kernel debugging operations.
|
|
When in doubt, say "N".
|
|
|
|
config SGI_SNSC
|
|
bool "SGI Altix system controller communication support"
|
|
depends on (IA64_SGI_SN2 || IA64_GENERIC)
|
|
help
|
|
If you have an SGI Altix and you want to enable system
|
|
controller communication from user space (you want this!),
|
|
say Y. Otherwise, say N.
|
|
|
|
config SGI_TIOCX
|
|
bool "SGI TIO CX driver support"
|
|
depends on (IA64_SGI_SN2 || IA64_GENERIC)
|
|
help
|
|
If you have an SGI Altix and you have fpga devices attached
|
|
to your TIO, say Y here, otherwise say N.
|
|
|
|
config SGI_MBCS
|
|
tristate "SGI FPGA Core Services driver support"
|
|
depends on SGI_TIOCX
|
|
help
|
|
If you have an SGI Altix with an attached SABrick
|
|
say Y or M here, otherwise say N.
|
|
|
|
source "drivers/tty/serial/Kconfig"
|
|
source "drivers/tty/serdev/Kconfig"
|
|
|
|
config TTY_PRINTK
|
|
tristate "TTY driver to output user messages via printk"
|
|
depends on EXPERT && TTY
|
|
default n
|
|
---help---
|
|
If you say Y here, the support for writing user messages (i.e.
|
|
console messages) via printk is available.
|
|
|
|
The feature is useful to inline user messages with kernel
|
|
messages.
|
|
In order to use this feature, you should output user messages
|
|
to /dev/ttyprintk or redirect console to this TTY.
|
|
|
|
If unsure, say N.
|
|
|
|
config PRINTER
|
|
tristate "Parallel printer support"
|
|
depends on PARPORT
|
|
---help---
|
|
If you intend to attach a printer to the parallel port of your Linux
|
|
box (as opposed to using a serial printer; if the connector at the
|
|
printer has 9 or 25 holes ["female"], then it's serial), say Y.
|
|
Also read the Printing-HOWTO, available from
|
|
<http://www.tldp.org/docs.html#howto>.
|
|
|
|
It is possible to share one parallel port among several devices
|
|
(e.g. printer and ZIP drive) and it is safe to compile the
|
|
corresponding drivers into the kernel.
|
|
|
|
To compile this driver as a module, choose M here and read
|
|
<file:Documentation/parport.txt>. The module will be called lp.
|
|
|
|
If you have several parallel ports, you can specify which ports to
|
|
use with the "lp" kernel command line option. (Try "man bootparam"
|
|
or see the documentation of your boot loader (lilo or loadlin) about
|
|
how to pass options to the kernel at boot time.) The syntax of the
|
|
"lp" command line option can be found in <file:drivers/char/lp.c>.
|
|
|
|
If you have more than 8 printers, you need to increase the LP_NO
|
|
macro in lp.c and the PARPORT_MAX macro in parport.h.
|
|
|
|
config LP_CONSOLE
|
|
bool "Support for console on line printer"
|
|
depends on PRINTER
|
|
---help---
|
|
If you want kernel messages to be printed out as they occur, you
|
|
can have a console on the printer. This option adds support for
|
|
doing that; to actually get it to happen you need to pass the
|
|
option "console=lp0" to the kernel at boot time.
|
|
|
|
If the printer is out of paper (or off, or unplugged, or too
|
|
busy..) the kernel will stall until the printer is ready again.
|
|
By defining CONSOLE_LP_STRICT to 0 (at your own risk) you
|
|
can make the kernel continue when this happens,
|
|
but it'll lose the kernel messages.
|
|
|
|
If unsure, say N.
|
|
|
|
config PPDEV
|
|
tristate "Support for user-space parallel port device drivers"
|
|
depends on PARPORT
|
|
---help---
|
|
Saying Y to this adds support for /dev/parport device nodes. This
|
|
is needed for programs that want portable access to the parallel
|
|
port, for instance deviceid (which displays Plug-and-Play device
|
|
IDs).
|
|
|
|
This is the parallel port equivalent of SCSI generic support (sg).
|
|
It is safe to say N to this -- it is not needed for normal printing
|
|
or parallel port CD-ROM/disk support.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ppdev.
|
|
|
|
If unsure, say N.
|
|
|
|
source "drivers/tty/hvc/Kconfig"
|
|
|
|
config VIRTIO_CONSOLE
|
|
tristate "Virtio console"
|
|
depends on VIRTIO && TTY
|
|
select HVC_DRIVER
|
|
help
|
|
Virtio console for use with hypervisors.
|
|
|
|
Also serves as a general-purpose serial device for data
|
|
transfer between the guest and host. Character devices at
|
|
/dev/vportNpn will be created when corresponding ports are
|
|
found, where N is the device number and n is the port number
|
|
within that device. If specified by the host, a sysfs
|
|
attribute called 'name' will be populated with a name for
|
|
the port which can be used by udev scripts to create a
|
|
symlink to the device.
|
|
|
|
config IBM_BSR
|
|
tristate "IBM POWER Barrier Synchronization Register support"
|
|
depends on PPC_PSERIES
|
|
help
|
|
This devices exposes a hardware mechanism for fast synchronization
|
|
of threads across a large system which avoids bouncing a cacheline
|
|
between several cores on a system
|
|
|
|
config POWERNV_OP_PANEL
|
|
tristate "IBM POWERNV Operator Panel Display support"
|
|
depends on PPC_POWERNV
|
|
default m
|
|
help
|
|
If you say Y here, a special character device node, /dev/op_panel,
|
|
will be created which exposes the operator panel display on IBM
|
|
Power Systems machines with FSPs.
|
|
|
|
If you don't require access to the operator panel display from user
|
|
space, say N.
|
|
|
|
If unsure, say M here to build it as a module called powernv-op-panel.
|
|
|
|
source "drivers/char/ipmi/Kconfig"
|
|
|
|
config DS1620
|
|
tristate "NetWinder thermometer support"
|
|
depends on ARCH_NETWINDER
|
|
help
|
|
Say Y here to include support for the thermal management hardware
|
|
found in the NetWinder. This driver allows the user to control the
|
|
temperature set points and to read the current temperature.
|
|
|
|
It is also possible to say M here to build it as a module (ds1620)
|
|
It is recommended to be used on a NetWinder, but it is not a
|
|
necessity.
|
|
|
|
config NWBUTTON
|
|
tristate "NetWinder Button"
|
|
depends on ARCH_NETWINDER
|
|
---help---
|
|
If you say Y here and create a character device node /dev/nwbutton
|
|
with major and minor numbers 10 and 158 ("man mknod"), then every
|
|
time the orange button is pressed a number of times, the number of
|
|
times the button was pressed will be written to that device.
|
|
|
|
This is most useful for applications, as yet unwritten, which
|
|
perform actions based on how many times the button is pressed in a
|
|
row.
|
|
|
|
Do not hold the button down for too long, as the driver does not
|
|
alter the behaviour of the hardware reset circuitry attached to the
|
|
button; it will still execute a hard reset if the button is held
|
|
down for longer than approximately five seconds.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called nwbutton.
|
|
|
|
Most people will answer Y to this question and "Reboot Using Button"
|
|
below to be able to initiate a system shutdown from the button.
|
|
|
|
config NWBUTTON_REBOOT
|
|
bool "Reboot Using Button"
|
|
depends on NWBUTTON
|
|
help
|
|
If you say Y here, then you will be able to initiate a system
|
|
shutdown and reboot by pressing the orange button a number of times.
|
|
The number of presses to initiate the shutdown is two by default,
|
|
but this can be altered by modifying the value of NUM_PRESSES_REBOOT
|
|
in nwbutton.h and recompiling the driver or, if you compile the
|
|
driver as a module, you can specify the number of presses at load
|
|
time with "insmod button reboot_count=<something>".
|
|
|
|
config NWFLASH
|
|
tristate "NetWinder flash support"
|
|
depends on ARCH_NETWINDER
|
|
---help---
|
|
If you say Y here and create a character device /dev/flash with
|
|
major 10 and minor 160 you can manipulate the flash ROM containing
|
|
the NetWinder firmware. Be careful as accidentally overwriting the
|
|
flash contents can render your computer unbootable. On no account
|
|
allow random users access to this device. :-)
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called nwflash.
|
|
|
|
If you're not sure, say N.
|
|
|
|
source "drivers/char/hw_random/Kconfig"
|
|
|
|
config NVRAM
|
|
tristate "/dev/nvram support"
|
|
depends on ATARI || X86 || GENERIC_NVRAM
|
|
---help---
|
|
If you say Y here and create a character special file /dev/nvram
|
|
with major number 10 and minor number 144 using mknod ("man mknod"),
|
|
you get read and write access to the extra bytes of non-volatile
|
|
memory in the real time clock (RTC), which is contained in every PC
|
|
and most Ataris. The actual number of bytes varies, depending on the
|
|
nvram in the system, but is usually 114 (128-14 for the RTC).
|
|
|
|
This memory is conventionally called "CMOS RAM" on PCs and "NVRAM"
|
|
on Ataris. /dev/nvram may be used to view settings there, or to
|
|
change them (with some utility). It could also be used to frequently
|
|
save a few bits of very important data that may not be lost over
|
|
power-off and for which writing to disk is too insecure. Note
|
|
however that most NVRAM space in a PC belongs to the BIOS and you
|
|
should NEVER idly tamper with it. See Ralf Brown's interrupt list
|
|
for a guide to the use of CMOS bytes by your BIOS.
|
|
|
|
On Atari machines, /dev/nvram is always configured and does not need
|
|
to be selected.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called nvram.
|
|
|
|
#
|
|
# These legacy RTC drivers just cause too many conflicts with the generic
|
|
# RTC framework ... let's not even try to coexist any more.
|
|
#
|
|
if RTC_LIB=n
|
|
|
|
config RTC
|
|
tristate "Enhanced Real Time Clock Support (legacy PC RTC driver)"
|
|
depends on ALPHA || (MIPS && MACH_LOONGSON64)
|
|
---help---
|
|
If you say Y here and create a character special file /dev/rtc with
|
|
major number 10 and minor number 135 using mknod ("man mknod"), you
|
|
will get access to the real time clock (or hardware clock) built
|
|
into your computer.
|
|
|
|
Every PC has such a clock built in. It can be used to generate
|
|
signals from as low as 1Hz up to 8192Hz, and can also be used
|
|
as a 24 hour alarm. It reports status information via the file
|
|
/proc/driver/rtc and its behaviour is set by various ioctls on
|
|
/dev/rtc.
|
|
|
|
If you run Linux on a multiprocessor machine and said Y to
|
|
"Symmetric Multi Processing" above, you should say Y here to read
|
|
and set the RTC in an SMP compatible fashion.
|
|
|
|
If you think you have a use for such a device (such as periodic data
|
|
sampling), then say Y here, and read <file:Documentation/rtc.txt>
|
|
for details.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called rtc.
|
|
|
|
config JS_RTC
|
|
tristate "Enhanced Real Time Clock Support"
|
|
depends on SPARC32 && PCI
|
|
---help---
|
|
If you say Y here and create a character special file /dev/rtc with
|
|
major number 10 and minor number 135 using mknod ("man mknod"), you
|
|
will get access to the real time clock (or hardware clock) built
|
|
into your computer.
|
|
|
|
Every PC has such a clock built in. It can be used to generate
|
|
signals from as low as 1Hz up to 8192Hz, and can also be used
|
|
as a 24 hour alarm. It reports status information via the file
|
|
/proc/driver/rtc and its behaviour is set by various ioctls on
|
|
/dev/rtc.
|
|
|
|
If you think you have a use for such a device (such as periodic data
|
|
sampling), then say Y here, and read <file:Documentation/rtc.txt>
|
|
for details.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called js-rtc.
|
|
|
|
config EFI_RTC
|
|
bool "EFI Real Time Clock Services"
|
|
depends on IA64
|
|
|
|
endif # RTC_LIB
|
|
|
|
config DTLK
|
|
tristate "Double Talk PC internal speech card support"
|
|
depends on ISA
|
|
help
|
|
This driver is for the DoubleTalk PC, a speech synthesizer
|
|
manufactured by RC Systems (<http://www.rcsys.com/>). It is also
|
|
called the `internal DoubleTalk'.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called dtlk.
|
|
|
|
config XILINX_HWICAP
|
|
tristate "Xilinx HWICAP Support"
|
|
depends on XILINX_VIRTEX || MICROBLAZE
|
|
help
|
|
This option enables support for Xilinx Internal Configuration
|
|
Access Port (ICAP) driver. The ICAP is used on Xilinx Virtex
|
|
FPGA platforms to partially reconfigure the FPGA at runtime.
|
|
|
|
If unsure, say N.
|
|
|
|
config R3964
|
|
tristate "Siemens R3964 line discipline"
|
|
depends on TTY
|
|
---help---
|
|
This driver allows synchronous communication with devices using the
|
|
Siemens R3964 packet protocol. Unless you are dealing with special
|
|
hardware like PLCs, you are unlikely to need this.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called n_r3964.
|
|
|
|
If unsure, say N.
|
|
|
|
config APPLICOM
|
|
tristate "Applicom intelligent fieldbus card support"
|
|
depends on PCI
|
|
---help---
|
|
This driver provides the kernel-side support for the intelligent
|
|
fieldbus cards made by Applicom International. More information
|
|
about these cards can be found on the WWW at the address
|
|
<http://www.applicom-int.com/>, or by email from David Woodhouse
|
|
<dwmw2@infradead.org>.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called applicom.
|
|
|
|
If unsure, say N.
|
|
|
|
config SONYPI
|
|
tristate "Sony Vaio Programmable I/O Control Device support"
|
|
depends on X86_32 && PCI && INPUT
|
|
---help---
|
|
This driver enables access to the Sony Programmable I/O Control
|
|
Device which can be found in many (all ?) Sony Vaio laptops.
|
|
|
|
If you have one of those laptops, read
|
|
<file:Documentation/laptops/sonypi.txt>, and say Y or M here.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called sonypi.
|
|
|
|
config GPIO_TB0219
|
|
tristate "TANBAC TB0219 GPIO support"
|
|
depends on TANBAC_TB022X
|
|
select GPIO_VR41XX
|
|
|
|
source "drivers/char/pcmcia/Kconfig"
|
|
|
|
config MWAVE
|
|
tristate "ACP Modem (Mwave) support"
|
|
depends on X86 && TTY
|
|
select SERIAL_8250
|
|
---help---
|
|
The ACP modem (Mwave) for Linux is a WinModem. It is composed of a
|
|
kernel driver and a user level application. Together these components
|
|
support direct attachment to public switched telephone networks (PSTNs)
|
|
and support selected world wide countries.
|
|
|
|
This version of the ACP Modem driver supports the IBM Thinkpad 600E,
|
|
600, and 770 that include on board ACP modem hardware.
|
|
|
|
The modem also supports the standard communications port interface
|
|
(ttySx) and is compatible with the Hayes AT Command Set.
|
|
|
|
The user level application needed to use this driver can be found at
|
|
the IBM Linux Technology Center (LTC) web site:
|
|
<http://www.ibm.com/linux/ltc/>.
|
|
|
|
If you own one of the above IBM Thinkpads which has the Mwave chipset
|
|
in it, say Y.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called mwave.
|
|
|
|
config SCx200_GPIO
|
|
tristate "NatSemi SCx200 GPIO Support"
|
|
depends on SCx200
|
|
select NSC_GPIO
|
|
help
|
|
Give userspace access to the GPIO pins on the National
|
|
Semiconductor SCx200 processors.
|
|
|
|
If compiled as a module, it will be called scx200_gpio.
|
|
|
|
config PC8736x_GPIO
|
|
tristate "NatSemi PC8736x GPIO Support"
|
|
depends on X86_32 && !UML
|
|
default SCx200_GPIO # mostly N
|
|
select NSC_GPIO # needed for support routines
|
|
help
|
|
Give userspace access to the GPIO pins on the National
|
|
Semiconductor PC-8736x (x=[03456]) SuperIO chip. The chip
|
|
has multiple functional units, inc several managed by
|
|
hwmon/pc87360 driver. Tested with PC-87366
|
|
|
|
If compiled as a module, it will be called pc8736x_gpio.
|
|
|
|
config NSC_GPIO
|
|
tristate "NatSemi Base GPIO Support"
|
|
depends on X86_32
|
|
# selected by SCx200_GPIO and PC8736x_GPIO
|
|
# what about 2 selectors differing: m != y
|
|
help
|
|
Common support used (and needed) by scx200_gpio and
|
|
pc8736x_gpio drivers. If those drivers are built as
|
|
modules, this one will be too, named nsc_gpio
|
|
|
|
config RAW_DRIVER
|
|
tristate "RAW driver (/dev/raw/rawN)"
|
|
depends on BLOCK
|
|
help
|
|
The raw driver permits block devices to be bound to /dev/raw/rawN.
|
|
Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O.
|
|
See the raw(8) manpage for more details.
|
|
|
|
Applications should preferably open the device (eg /dev/hda1)
|
|
with the O_DIRECT flag.
|
|
|
|
config MAX_RAW_DEVS
|
|
int "Maximum number of RAW devices to support (1-65536)"
|
|
depends on RAW_DRIVER
|
|
range 1 65536
|
|
default "256"
|
|
help
|
|
The maximum number of RAW devices that are supported.
|
|
Default is 256. Increase this number in case you need lots of
|
|
raw devices.
|
|
|
|
config HPET
|
|
bool "HPET - High Precision Event Timer" if (X86 || IA64)
|
|
default n
|
|
depends on ACPI
|
|
help
|
|
If you say Y here, you will have a miscdevice named "/dev/hpet/". Each
|
|
open selects one of the timers supported by the HPET. The timers are
|
|
non-periodic and/or periodic.
|
|
|
|
config HPET_MMAP
|
|
bool "Allow mmap of HPET"
|
|
default y
|
|
depends on HPET
|
|
help
|
|
If you say Y here, user applications will be able to mmap
|
|
the HPET registers.
|
|
|
|
config HPET_MMAP_DEFAULT
|
|
bool "Enable HPET MMAP access by default"
|
|
default y
|
|
depends on HPET_MMAP
|
|
help
|
|
In some hardware implementations, the page containing HPET
|
|
registers may also contain other things that shouldn't be
|
|
exposed to the user. This option selects the default (if
|
|
kernel parameter hpet_mmap is not set) user access to the
|
|
registers for applications that require it.
|
|
|
|
config HANGCHECK_TIMER
|
|
tristate "Hangcheck timer"
|
|
depends on X86 || IA64 || PPC64 || S390
|
|
help
|
|
The hangcheck-timer module detects when the system has gone
|
|
out to lunch past a certain margin. It can reboot the system
|
|
or merely print a warning.
|
|
|
|
config UV_MMTIMER
|
|
tristate "UV_MMTIMER Memory mapped RTC for SGI UV"
|
|
depends on X86_UV
|
|
default m
|
|
help
|
|
The uv_mmtimer device allows direct userspace access to the
|
|
UV system timer.
|
|
|
|
source "drivers/char/tpm/Kconfig"
|
|
|
|
config TELCLOCK
|
|
tristate "Telecom clock driver for ATCA SBC"
|
|
depends on X86
|
|
default n
|
|
help
|
|
The telecom clock device is specific to the MPCBL0010 and MPCBL0050
|
|
ATCA computers and allows direct userspace access to the
|
|
configuration of the telecom clock configuration settings. This
|
|
device is used for hardware synchronization across the ATCA backplane
|
|
fabric. Upon loading, the driver exports a sysfs directory,
|
|
/sys/devices/platform/telco_clock, with a number of files for
|
|
controlling the behavior of this hardware.
|
|
|
|
config DEVPORT
|
|
bool "/dev/port character device"
|
|
depends on ISA || PCI
|
|
default y
|
|
help
|
|
Say Y here if you want to support the /dev/port device. The /dev/port
|
|
device is similar to /dev/mem, but for I/O ports.
|
|
|
|
source "drivers/s390/char/Kconfig"
|
|
|
|
source "drivers/char/xillybus/Kconfig"
|
|
|
|
endmenu
|
|
|