OpenCloudOS-Kernel/Documentation/devicetree/bindings/i2c/i2c-davinci.txt

44 lines
1.4 KiB
Plaintext

* Texas Instruments Davinci/Keystone I2C
This file provides information, what the device node for the
davinci/keystone i2c interface contains.
Required properties:
- compatible: "ti,davinci-i2c" or "ti,keystone-i2c";
- reg : Offset and length of the register set for the device
- clocks: I2C functional clock phandle.
For 66AK2G this property should be set per binding,
Documentation/devicetree/bindings/clock/ti,sci-clk.txt
SoC-specific Required Properties:
The following are mandatory properties for Keystone 2 66AK2G SoCs only:
- power-domains: Should contain a phandle to a PM domain provider node
and an args specifier containing the I2C device id
value. This property is as per the binding,
Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
Recommended properties :
- interrupts : standard interrupt property.
- clock-frequency : desired I2C bus clock frequency in Hz.
- ti,has-pfunc: boolean; if defined, it indicates that SoC supports PFUNC
registers. PFUNC registers allow to switch I2C pins to function as
GPIOs, so they can be toggled manually.
Example (enbw_cmc board):
i2c@1c22000 {
compatible = "ti,davinci-i2c";
reg = <0x22000 0x1000>;
clock-frequency = <100000>;
interrupts = <15>;
interrupt-parent = <&intc>;
#address-cells = <1>;
#size-cells = <0>;
dtt@48 {
compatible = "national,lm75";
reg = <0x48>;
};
};