238 lines
5.8 KiB
C
238 lines
5.8 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* linux/drivers/mmc/host/sdhci_f_sdh30.c
|
|
*
|
|
* Copyright (C) 2013 - 2015 Fujitsu Semiconductor, Ltd
|
|
* Vincent Yang <vincent.yang@tw.fujitsu.com>
|
|
* Copyright (C) 2015 Linaro Ltd Andy Green <andy.green@linaro.org>
|
|
*/
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/err.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/property.h>
|
|
#include <linux/clk.h>
|
|
|
|
#include "sdhci-pltfm.h"
|
|
#include "sdhci_f_sdh30.h"
|
|
|
|
struct f_sdhost_priv {
|
|
struct clk *clk_iface;
|
|
struct clk *clk;
|
|
u32 vendor_hs200;
|
|
struct device *dev;
|
|
bool enable_cmd_dat_delay;
|
|
};
|
|
|
|
static void sdhci_f_sdh30_soft_voltage_switch(struct sdhci_host *host)
|
|
{
|
|
struct f_sdhost_priv *priv = sdhci_priv(host);
|
|
u32 ctrl = 0;
|
|
|
|
usleep_range(2500, 3000);
|
|
ctrl = sdhci_readl(host, F_SDH30_IO_CONTROL2);
|
|
ctrl |= F_SDH30_CRES_O_DN;
|
|
sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2);
|
|
ctrl |= F_SDH30_MSEL_O_1_8;
|
|
sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2);
|
|
|
|
ctrl &= ~F_SDH30_CRES_O_DN;
|
|
sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2);
|
|
usleep_range(2500, 3000);
|
|
|
|
if (priv->vendor_hs200) {
|
|
dev_info(priv->dev, "%s: setting hs200\n", __func__);
|
|
ctrl = sdhci_readl(host, F_SDH30_ESD_CONTROL);
|
|
ctrl |= priv->vendor_hs200;
|
|
sdhci_writel(host, ctrl, F_SDH30_ESD_CONTROL);
|
|
}
|
|
|
|
ctrl = sdhci_readl(host, F_SDH30_TUNING_SETTING);
|
|
ctrl |= F_SDH30_CMD_CHK_DIS;
|
|
sdhci_writel(host, ctrl, F_SDH30_TUNING_SETTING);
|
|
}
|
|
|
|
static unsigned int sdhci_f_sdh30_get_min_clock(struct sdhci_host *host)
|
|
{
|
|
return F_SDH30_MIN_CLOCK;
|
|
}
|
|
|
|
static void sdhci_f_sdh30_reset(struct sdhci_host *host, u8 mask)
|
|
{
|
|
struct f_sdhost_priv *priv = sdhci_priv(host);
|
|
u32 ctl;
|
|
|
|
if (sdhci_readw(host, SDHCI_CLOCK_CONTROL) == 0)
|
|
sdhci_writew(host, 0xBC01, SDHCI_CLOCK_CONTROL);
|
|
|
|
sdhci_reset(host, mask);
|
|
|
|
if (priv->enable_cmd_dat_delay) {
|
|
ctl = sdhci_readl(host, F_SDH30_ESD_CONTROL);
|
|
ctl |= F_SDH30_CMD_DAT_DELAY;
|
|
sdhci_writel(host, ctl, F_SDH30_ESD_CONTROL);
|
|
}
|
|
}
|
|
|
|
static const struct sdhci_ops sdhci_f_sdh30_ops = {
|
|
.voltage_switch = sdhci_f_sdh30_soft_voltage_switch,
|
|
.get_min_clock = sdhci_f_sdh30_get_min_clock,
|
|
.reset = sdhci_f_sdh30_reset,
|
|
.set_clock = sdhci_set_clock,
|
|
.set_bus_width = sdhci_set_bus_width,
|
|
.set_uhs_signaling = sdhci_set_uhs_signaling,
|
|
};
|
|
|
|
static int sdhci_f_sdh30_probe(struct platform_device *pdev)
|
|
{
|
|
struct sdhci_host *host;
|
|
struct device *dev = &pdev->dev;
|
|
struct resource *res;
|
|
int irq, ctrl = 0, ret = 0;
|
|
struct f_sdhost_priv *priv;
|
|
u32 reg = 0;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
host = sdhci_alloc_host(dev, sizeof(struct f_sdhost_priv));
|
|
if (IS_ERR(host))
|
|
return PTR_ERR(host);
|
|
|
|
priv = sdhci_priv(host);
|
|
priv->dev = dev;
|
|
|
|
host->quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
|
|
SDHCI_QUIRK_INVERTED_WRITE_PROTECT;
|
|
host->quirks2 = SDHCI_QUIRK2_SUPPORT_SINGLE |
|
|
SDHCI_QUIRK2_TUNING_WORK_AROUND;
|
|
|
|
priv->enable_cmd_dat_delay = device_property_read_bool(dev,
|
|
"fujitsu,cmd-dat-delay-select");
|
|
|
|
ret = mmc_of_parse(host->mmc);
|
|
if (ret)
|
|
goto err;
|
|
|
|
platform_set_drvdata(pdev, host);
|
|
|
|
host->hw_name = "f_sdh30";
|
|
host->ops = &sdhci_f_sdh30_ops;
|
|
host->irq = irq;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
host->ioaddr = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(host->ioaddr)) {
|
|
ret = PTR_ERR(host->ioaddr);
|
|
goto err;
|
|
}
|
|
|
|
if (dev_of_node(dev)) {
|
|
sdhci_get_of_property(pdev);
|
|
|
|
priv->clk_iface = devm_clk_get(&pdev->dev, "iface");
|
|
if (IS_ERR(priv->clk_iface)) {
|
|
ret = PTR_ERR(priv->clk_iface);
|
|
goto err;
|
|
}
|
|
|
|
ret = clk_prepare_enable(priv->clk_iface);
|
|
if (ret)
|
|
goto err;
|
|
|
|
priv->clk = devm_clk_get(&pdev->dev, "core");
|
|
if (IS_ERR(priv->clk)) {
|
|
ret = PTR_ERR(priv->clk);
|
|
goto err_clk;
|
|
}
|
|
|
|
ret = clk_prepare_enable(priv->clk);
|
|
if (ret)
|
|
goto err_clk;
|
|
}
|
|
|
|
/* init vendor specific regs */
|
|
ctrl = sdhci_readw(host, F_SDH30_AHB_CONFIG);
|
|
ctrl |= F_SDH30_SIN | F_SDH30_AHB_INCR_16 | F_SDH30_AHB_INCR_8 |
|
|
F_SDH30_AHB_INCR_4;
|
|
ctrl &= ~(F_SDH30_AHB_BIGED | F_SDH30_BUSLOCK_EN);
|
|
sdhci_writew(host, ctrl, F_SDH30_AHB_CONFIG);
|
|
|
|
reg = sdhci_readl(host, F_SDH30_ESD_CONTROL);
|
|
sdhci_writel(host, reg & ~F_SDH30_EMMC_RST, F_SDH30_ESD_CONTROL);
|
|
msleep(20);
|
|
sdhci_writel(host, reg | F_SDH30_EMMC_RST, F_SDH30_ESD_CONTROL);
|
|
|
|
reg = sdhci_readl(host, SDHCI_CAPABILITIES);
|
|
if (reg & SDHCI_CAN_DO_8BIT)
|
|
priv->vendor_hs200 = F_SDH30_EMMC_HS200;
|
|
|
|
ret = sdhci_add_host(host);
|
|
if (ret)
|
|
goto err_add_host;
|
|
|
|
return 0;
|
|
|
|
err_add_host:
|
|
clk_disable_unprepare(priv->clk);
|
|
err_clk:
|
|
clk_disable_unprepare(priv->clk_iface);
|
|
err:
|
|
sdhci_free_host(host);
|
|
return ret;
|
|
}
|
|
|
|
static int sdhci_f_sdh30_remove(struct platform_device *pdev)
|
|
{
|
|
struct sdhci_host *host = platform_get_drvdata(pdev);
|
|
struct f_sdhost_priv *priv = sdhci_priv(host);
|
|
|
|
sdhci_remove_host(host, readl(host->ioaddr + SDHCI_INT_STATUS) ==
|
|
0xffffffff);
|
|
|
|
clk_disable_unprepare(priv->clk_iface);
|
|
clk_disable_unprepare(priv->clk);
|
|
|
|
sdhci_free_host(host);
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id f_sdh30_dt_ids[] = {
|
|
{ .compatible = "fujitsu,mb86s70-sdhci-3.0" },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, f_sdh30_dt_ids);
|
|
#endif
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static const struct acpi_device_id f_sdh30_acpi_ids[] = {
|
|
{ "SCX0002" },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, f_sdh30_acpi_ids);
|
|
#endif
|
|
|
|
static struct platform_driver sdhci_f_sdh30_driver = {
|
|
.driver = {
|
|
.name = "f_sdh30",
|
|
.of_match_table = of_match_ptr(f_sdh30_dt_ids),
|
|
.acpi_match_table = ACPI_PTR(f_sdh30_acpi_ids),
|
|
.pm = &sdhci_pltfm_pmops,
|
|
},
|
|
.probe = sdhci_f_sdh30_probe,
|
|
.remove = sdhci_f_sdh30_remove,
|
|
};
|
|
|
|
module_platform_driver(sdhci_f_sdh30_driver);
|
|
|
|
MODULE_DESCRIPTION("F_SDH30 SD Card Controller driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("FUJITSU SEMICONDUCTOR LTD.");
|
|
MODULE_ALIAS("platform:f_sdh30");
|