363 lines
9.4 KiB
C
363 lines
9.4 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2013 - 2015 Fujitsu Semiconductor, Ltd
|
|
* Vincent Yang <vincent.yang@tw.fujitsu.com>
|
|
* Copyright (C) 2015 Linaro Ltd Andy Green <andy.green@linaro.org>
|
|
* Copyright (C) 2019 Socionext Inc.
|
|
* Takao Orito <orito.takao@socionext.com>
|
|
*/
|
|
|
|
#include <linux/bits.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/property.h>
|
|
|
|
#include "sdhci-pltfm.h"
|
|
#include "sdhci_f_sdh30.h"
|
|
|
|
/* milbeaut bridge controller register */
|
|
#define MLB_SOFT_RESET 0x0200
|
|
#define MLB_SOFT_RESET_RSTX BIT(0)
|
|
|
|
#define MLB_WP_CD_LED_SET 0x0210
|
|
#define MLB_WP_CD_LED_SET_LED_INV BIT(2)
|
|
|
|
#define MLB_CR_SET 0x0220
|
|
#define MLB_CR_SET_CR_TOCLKUNIT BIT(24)
|
|
#define MLB_CR_SET_CR_TOCLKFREQ_SFT (16)
|
|
#define MLB_CR_SET_CR_TOCLKFREQ_MASK (0x3F << MLB_CR_SET_CR_TOCLKFREQ_SFT)
|
|
#define MLB_CR_SET_CR_BCLKFREQ_SFT (8)
|
|
#define MLB_CR_SET_CR_BCLKFREQ_MASK (0xFF << MLB_CR_SET_CR_BCLKFREQ_SFT)
|
|
#define MLB_CR_SET_CR_RTUNTIMER_SFT (4)
|
|
#define MLB_CR_SET_CR_RTUNTIMER_MASK (0xF << MLB_CR_SET_CR_RTUNTIMER_SFT)
|
|
|
|
#define MLB_SD_TOCLK_I_DIV 16
|
|
#define MLB_TOCLKFREQ_UNIT_THRES 16000000
|
|
#define MLB_CAL_TOCLKFREQ_MHZ(rate) (rate / MLB_SD_TOCLK_I_DIV / 1000000)
|
|
#define MLB_CAL_TOCLKFREQ_KHZ(rate) (rate / MLB_SD_TOCLK_I_DIV / 1000)
|
|
#define MLB_TOCLKFREQ_MAX 63
|
|
#define MLB_TOCLKFREQ_MIN 1
|
|
|
|
#define MLB_SD_BCLK_I_DIV 4
|
|
#define MLB_CAL_BCLKFREQ(rate) (rate / MLB_SD_BCLK_I_DIV / 1000000)
|
|
#define MLB_BCLKFREQ_MAX 255
|
|
#define MLB_BCLKFREQ_MIN 1
|
|
|
|
#define MLB_CDR_SET 0x0230
|
|
#define MLB_CDR_SET_CLK2POW16 3
|
|
|
|
struct f_sdhost_priv {
|
|
struct clk *clk_iface;
|
|
struct clk *clk;
|
|
struct device *dev;
|
|
bool enable_cmd_dat_delay;
|
|
};
|
|
|
|
static void sdhci_milbeaut_soft_voltage_switch(struct sdhci_host *host)
|
|
{
|
|
u32 ctrl = 0;
|
|
|
|
usleep_range(2500, 3000);
|
|
ctrl = sdhci_readl(host, F_SDH30_IO_CONTROL2);
|
|
ctrl |= F_SDH30_CRES_O_DN;
|
|
sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2);
|
|
ctrl |= F_SDH30_MSEL_O_1_8;
|
|
sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2);
|
|
|
|
ctrl &= ~F_SDH30_CRES_O_DN;
|
|
sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2);
|
|
usleep_range(2500, 3000);
|
|
|
|
ctrl = sdhci_readl(host, F_SDH30_TUNING_SETTING);
|
|
ctrl |= F_SDH30_CMD_CHK_DIS;
|
|
sdhci_writel(host, ctrl, F_SDH30_TUNING_SETTING);
|
|
}
|
|
|
|
static unsigned int sdhci_milbeaut_get_min_clock(struct sdhci_host *host)
|
|
{
|
|
return F_SDH30_MIN_CLOCK;
|
|
}
|
|
|
|
static void sdhci_milbeaut_reset(struct sdhci_host *host, u8 mask)
|
|
{
|
|
struct f_sdhost_priv *priv = sdhci_priv(host);
|
|
u16 clk;
|
|
u32 ctl;
|
|
ktime_t timeout;
|
|
|
|
clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
|
|
clk = (clk & ~SDHCI_CLOCK_CARD_EN) | SDHCI_CLOCK_INT_EN;
|
|
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
|
|
|
|
sdhci_reset(host, mask);
|
|
|
|
clk |= SDHCI_CLOCK_CARD_EN;
|
|
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
|
|
|
|
timeout = ktime_add_ms(ktime_get(), 10);
|
|
while (1) {
|
|
bool timedout = ktime_after(ktime_get(), timeout);
|
|
|
|
clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
|
|
if (clk & SDHCI_CLOCK_INT_STABLE)
|
|
break;
|
|
if (timedout) {
|
|
pr_err("%s: Internal clock never stabilised.\n",
|
|
mmc_hostname(host->mmc));
|
|
sdhci_dumpregs(host);
|
|
return;
|
|
}
|
|
udelay(10);
|
|
}
|
|
|
|
if (priv->enable_cmd_dat_delay) {
|
|
ctl = sdhci_readl(host, F_SDH30_ESD_CONTROL);
|
|
ctl |= F_SDH30_CMD_DAT_DELAY;
|
|
sdhci_writel(host, ctl, F_SDH30_ESD_CONTROL);
|
|
}
|
|
}
|
|
|
|
static void sdhci_milbeaut_set_power(struct sdhci_host *host,
|
|
unsigned char mode, unsigned short vdd)
|
|
{
|
|
if (!IS_ERR(host->mmc->supply.vmmc)) {
|
|
struct mmc_host *mmc = host->mmc;
|
|
|
|
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
|
|
}
|
|
sdhci_set_power_noreg(host, mode, vdd);
|
|
}
|
|
|
|
static const struct sdhci_ops sdhci_milbeaut_ops = {
|
|
.voltage_switch = sdhci_milbeaut_soft_voltage_switch,
|
|
.get_min_clock = sdhci_milbeaut_get_min_clock,
|
|
.reset = sdhci_milbeaut_reset,
|
|
.set_clock = sdhci_set_clock,
|
|
.set_bus_width = sdhci_set_bus_width,
|
|
.set_uhs_signaling = sdhci_set_uhs_signaling,
|
|
.set_power = sdhci_milbeaut_set_power,
|
|
};
|
|
|
|
static void sdhci_milbeaut_bridge_reset(struct sdhci_host *host,
|
|
int reset_flag)
|
|
{
|
|
if (reset_flag)
|
|
sdhci_writel(host, 0, MLB_SOFT_RESET);
|
|
else
|
|
sdhci_writel(host, MLB_SOFT_RESET_RSTX, MLB_SOFT_RESET);
|
|
}
|
|
|
|
static void sdhci_milbeaut_bridge_init(struct sdhci_host *host,
|
|
int rate)
|
|
{
|
|
u32 val, clk;
|
|
|
|
/* IO_SDIO_CR_SET should be set while reset */
|
|
val = sdhci_readl(host, MLB_CR_SET);
|
|
val &= ~(MLB_CR_SET_CR_TOCLKFREQ_MASK | MLB_CR_SET_CR_TOCLKUNIT |
|
|
MLB_CR_SET_CR_BCLKFREQ_MASK);
|
|
if (rate >= MLB_TOCLKFREQ_UNIT_THRES) {
|
|
clk = MLB_CAL_TOCLKFREQ_MHZ(rate);
|
|
clk = min_t(u32, MLB_TOCLKFREQ_MAX, clk);
|
|
val |= MLB_CR_SET_CR_TOCLKUNIT |
|
|
(clk << MLB_CR_SET_CR_TOCLKFREQ_SFT);
|
|
} else {
|
|
clk = MLB_CAL_TOCLKFREQ_KHZ(rate);
|
|
clk = min_t(u32, MLB_TOCLKFREQ_MAX, clk);
|
|
clk = max_t(u32, MLB_TOCLKFREQ_MIN, clk);
|
|
val |= clk << MLB_CR_SET_CR_TOCLKFREQ_SFT;
|
|
}
|
|
|
|
clk = MLB_CAL_BCLKFREQ(rate);
|
|
clk = min_t(u32, MLB_BCLKFREQ_MAX, clk);
|
|
clk = max_t(u32, MLB_BCLKFREQ_MIN, clk);
|
|
val |= clk << MLB_CR_SET_CR_BCLKFREQ_SFT;
|
|
val &= ~MLB_CR_SET_CR_RTUNTIMER_MASK;
|
|
sdhci_writel(host, val, MLB_CR_SET);
|
|
|
|
sdhci_writel(host, MLB_CDR_SET_CLK2POW16, MLB_CDR_SET);
|
|
|
|
sdhci_writel(host, MLB_WP_CD_LED_SET_LED_INV, MLB_WP_CD_LED_SET);
|
|
}
|
|
|
|
static void sdhci_milbeaut_vendor_init(struct sdhci_host *host)
|
|
{
|
|
struct f_sdhost_priv *priv = sdhci_priv(host);
|
|
u32 ctl;
|
|
|
|
ctl = sdhci_readl(host, F_SDH30_IO_CONTROL2);
|
|
ctl |= F_SDH30_CRES_O_DN;
|
|
sdhci_writel(host, ctl, F_SDH30_IO_CONTROL2);
|
|
ctl &= ~F_SDH30_MSEL_O_1_8;
|
|
sdhci_writel(host, ctl, F_SDH30_IO_CONTROL2);
|
|
ctl &= ~F_SDH30_CRES_O_DN;
|
|
sdhci_writel(host, ctl, F_SDH30_IO_CONTROL2);
|
|
|
|
ctl = sdhci_readw(host, F_SDH30_AHB_CONFIG);
|
|
ctl |= F_SDH30_SIN | F_SDH30_AHB_INCR_16 | F_SDH30_AHB_INCR_8 |
|
|
F_SDH30_AHB_INCR_4;
|
|
ctl &= ~(F_SDH30_AHB_BIGED | F_SDH30_BUSLOCK_EN);
|
|
sdhci_writew(host, ctl, F_SDH30_AHB_CONFIG);
|
|
|
|
if (priv->enable_cmd_dat_delay) {
|
|
ctl = sdhci_readl(host, F_SDH30_ESD_CONTROL);
|
|
ctl |= F_SDH30_CMD_DAT_DELAY;
|
|
sdhci_writel(host, ctl, F_SDH30_ESD_CONTROL);
|
|
}
|
|
}
|
|
|
|
static const struct of_device_id mlb_dt_ids[] = {
|
|
{
|
|
.compatible = "socionext,milbeaut-m10v-sdhci-3.0",
|
|
},
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mlb_dt_ids);
|
|
|
|
static void sdhci_milbeaut_init(struct sdhci_host *host)
|
|
{
|
|
struct f_sdhost_priv *priv = sdhci_priv(host);
|
|
int rate = clk_get_rate(priv->clk);
|
|
u16 ctl;
|
|
|
|
sdhci_milbeaut_bridge_reset(host, 0);
|
|
|
|
ctl = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
|
|
ctl &= ~(SDHCI_CLOCK_CARD_EN | SDHCI_CLOCK_INT_EN);
|
|
sdhci_writew(host, ctl, SDHCI_CLOCK_CONTROL);
|
|
|
|
sdhci_milbeaut_bridge_reset(host, 1);
|
|
|
|
sdhci_milbeaut_bridge_init(host, rate);
|
|
sdhci_milbeaut_bridge_reset(host, 0);
|
|
|
|
sdhci_milbeaut_vendor_init(host);
|
|
}
|
|
|
|
static int sdhci_milbeaut_probe(struct platform_device *pdev)
|
|
{
|
|
struct sdhci_host *host;
|
|
struct device *dev = &pdev->dev;
|
|
struct resource *res;
|
|
int irq, ret = 0;
|
|
struct f_sdhost_priv *priv;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
dev_err(dev, "%s: no irq specified\n", __func__);
|
|
return irq;
|
|
}
|
|
|
|
host = sdhci_alloc_host(dev, sizeof(struct f_sdhost_priv));
|
|
if (IS_ERR(host))
|
|
return PTR_ERR(host);
|
|
|
|
priv = sdhci_priv(host);
|
|
priv->dev = dev;
|
|
|
|
host->quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
|
|
SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
|
|
SDHCI_QUIRK_CLOCK_BEFORE_RESET |
|
|
SDHCI_QUIRK_DELAY_AFTER_POWER;
|
|
host->quirks2 = SDHCI_QUIRK2_SUPPORT_SINGLE |
|
|
SDHCI_QUIRK2_TUNING_WORK_AROUND |
|
|
SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
|
|
|
|
priv->enable_cmd_dat_delay = device_property_read_bool(dev,
|
|
"fujitsu,cmd-dat-delay-select");
|
|
|
|
ret = mmc_of_parse(host->mmc);
|
|
if (ret)
|
|
goto err;
|
|
|
|
platform_set_drvdata(pdev, host);
|
|
|
|
host->hw_name = "f_sdh30";
|
|
host->ops = &sdhci_milbeaut_ops;
|
|
host->irq = irq;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
host->ioaddr = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(host->ioaddr)) {
|
|
ret = PTR_ERR(host->ioaddr);
|
|
goto err;
|
|
}
|
|
|
|
if (dev_of_node(dev)) {
|
|
sdhci_get_of_property(pdev);
|
|
|
|
priv->clk_iface = devm_clk_get(&pdev->dev, "iface");
|
|
if (IS_ERR(priv->clk_iface)) {
|
|
ret = PTR_ERR(priv->clk_iface);
|
|
goto err;
|
|
}
|
|
|
|
ret = clk_prepare_enable(priv->clk_iface);
|
|
if (ret)
|
|
goto err;
|
|
|
|
priv->clk = devm_clk_get(&pdev->dev, "core");
|
|
if (IS_ERR(priv->clk)) {
|
|
ret = PTR_ERR(priv->clk);
|
|
goto err_clk;
|
|
}
|
|
|
|
ret = clk_prepare_enable(priv->clk);
|
|
if (ret)
|
|
goto err_clk;
|
|
}
|
|
|
|
sdhci_milbeaut_init(host);
|
|
|
|
ret = sdhci_add_host(host);
|
|
if (ret)
|
|
goto err_add_host;
|
|
|
|
return 0;
|
|
|
|
err_add_host:
|
|
clk_disable_unprepare(priv->clk);
|
|
err_clk:
|
|
clk_disable_unprepare(priv->clk_iface);
|
|
err:
|
|
sdhci_free_host(host);
|
|
return ret;
|
|
}
|
|
|
|
static int sdhci_milbeaut_remove(struct platform_device *pdev)
|
|
{
|
|
struct sdhci_host *host = platform_get_drvdata(pdev);
|
|
struct f_sdhost_priv *priv = sdhci_priv(host);
|
|
|
|
sdhci_remove_host(host, readl(host->ioaddr + SDHCI_INT_STATUS) ==
|
|
0xffffffff);
|
|
|
|
clk_disable_unprepare(priv->clk_iface);
|
|
clk_disable_unprepare(priv->clk);
|
|
|
|
sdhci_free_host(host);
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver sdhci_milbeaut_driver = {
|
|
.driver = {
|
|
.name = "sdhci-milbeaut",
|
|
.of_match_table = of_match_ptr(mlb_dt_ids),
|
|
},
|
|
.probe = sdhci_milbeaut_probe,
|
|
.remove = sdhci_milbeaut_remove,
|
|
};
|
|
|
|
module_platform_driver(sdhci_milbeaut_driver);
|
|
|
|
MODULE_DESCRIPTION("MILBEAUT SD Card Controller driver");
|
|
MODULE_AUTHOR("Takao Orito <orito.takao@socionext.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:sdhci-milbeaut");
|