1456 lines
34 KiB
C
1456 lines
34 KiB
C
/*
|
|
* KXCJK-1013 3-axis accelerometer driver
|
|
* Copyright (c) 2014, Intel Corporation.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/trigger.h>
|
|
#include <linux/iio/events.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
#include <linux/iio/accel/kxcjk_1013.h>
|
|
|
|
#define KXCJK1013_DRV_NAME "kxcjk1013"
|
|
#define KXCJK1013_IRQ_NAME "kxcjk1013_event"
|
|
|
|
#define KXCJK1013_REG_XOUT_L 0x06
|
|
/*
|
|
* From low byte X axis register, all the other addresses of Y and Z can be
|
|
* obtained by just applying axis offset. The following axis defines are just
|
|
* provide clarity, but not used.
|
|
*/
|
|
#define KXCJK1013_REG_XOUT_H 0x07
|
|
#define KXCJK1013_REG_YOUT_L 0x08
|
|
#define KXCJK1013_REG_YOUT_H 0x09
|
|
#define KXCJK1013_REG_ZOUT_L 0x0A
|
|
#define KXCJK1013_REG_ZOUT_H 0x0B
|
|
|
|
#define KXCJK1013_REG_DCST_RESP 0x0C
|
|
#define KXCJK1013_REG_WHO_AM_I 0x0F
|
|
#define KXCJK1013_REG_INT_SRC1 0x16
|
|
#define KXCJK1013_REG_INT_SRC2 0x17
|
|
#define KXCJK1013_REG_STATUS_REG 0x18
|
|
#define KXCJK1013_REG_INT_REL 0x1A
|
|
#define KXCJK1013_REG_CTRL1 0x1B
|
|
#define KXCJK1013_REG_CTRL2 0x1D
|
|
#define KXCJK1013_REG_INT_CTRL1 0x1E
|
|
#define KXCJK1013_REG_INT_CTRL2 0x1F
|
|
#define KXCJK1013_REG_DATA_CTRL 0x21
|
|
#define KXCJK1013_REG_WAKE_TIMER 0x29
|
|
#define KXCJK1013_REG_SELF_TEST 0x3A
|
|
#define KXCJK1013_REG_WAKE_THRES 0x6A
|
|
|
|
#define KXCJK1013_REG_CTRL1_BIT_PC1 BIT(7)
|
|
#define KXCJK1013_REG_CTRL1_BIT_RES BIT(6)
|
|
#define KXCJK1013_REG_CTRL1_BIT_DRDY BIT(5)
|
|
#define KXCJK1013_REG_CTRL1_BIT_GSEL1 BIT(4)
|
|
#define KXCJK1013_REG_CTRL1_BIT_GSEL0 BIT(3)
|
|
#define KXCJK1013_REG_CTRL1_BIT_WUFE BIT(1)
|
|
#define KXCJK1013_REG_INT_REG1_BIT_IEA BIT(4)
|
|
#define KXCJK1013_REG_INT_REG1_BIT_IEN BIT(5)
|
|
|
|
#define KXCJK1013_DATA_MASK_12_BIT 0x0FFF
|
|
#define KXCJK1013_MAX_STARTUP_TIME_US 100000
|
|
|
|
#define KXCJK1013_SLEEP_DELAY_MS 2000
|
|
|
|
#define KXCJK1013_REG_INT_SRC2_BIT_ZP BIT(0)
|
|
#define KXCJK1013_REG_INT_SRC2_BIT_ZN BIT(1)
|
|
#define KXCJK1013_REG_INT_SRC2_BIT_YP BIT(2)
|
|
#define KXCJK1013_REG_INT_SRC2_BIT_YN BIT(3)
|
|
#define KXCJK1013_REG_INT_SRC2_BIT_XP BIT(4)
|
|
#define KXCJK1013_REG_INT_SRC2_BIT_XN BIT(5)
|
|
|
|
#define KXCJK1013_DEFAULT_WAKE_THRES 1
|
|
|
|
enum kx_chipset {
|
|
KXCJK1013,
|
|
KXCJ91008,
|
|
KXTJ21009,
|
|
KX_MAX_CHIPS /* this must be last */
|
|
};
|
|
|
|
struct kxcjk1013_data {
|
|
struct i2c_client *client;
|
|
struct iio_trigger *dready_trig;
|
|
struct iio_trigger *motion_trig;
|
|
struct mutex mutex;
|
|
s16 buffer[8];
|
|
u8 odr_bits;
|
|
u8 range;
|
|
int wake_thres;
|
|
int wake_dur;
|
|
bool active_high_intr;
|
|
bool dready_trigger_on;
|
|
int ev_enable_state;
|
|
bool motion_trigger_on;
|
|
int64_t timestamp;
|
|
enum kx_chipset chipset;
|
|
bool is_smo8500_device;
|
|
};
|
|
|
|
enum kxcjk1013_axis {
|
|
AXIS_X,
|
|
AXIS_Y,
|
|
AXIS_Z,
|
|
};
|
|
|
|
enum kxcjk1013_mode {
|
|
STANDBY,
|
|
OPERATION,
|
|
};
|
|
|
|
enum kxcjk1013_range {
|
|
KXCJK1013_RANGE_2G,
|
|
KXCJK1013_RANGE_4G,
|
|
KXCJK1013_RANGE_8G,
|
|
};
|
|
|
|
static const struct {
|
|
int val;
|
|
int val2;
|
|
int odr_bits;
|
|
} samp_freq_table[] = { {0, 781000, 0x08}, {1, 563000, 0x09},
|
|
{3, 125000, 0x0A}, {6, 250000, 0x0B}, {12, 500000, 0},
|
|
{25, 0, 0x01}, {50, 0, 0x02}, {100, 0, 0x03},
|
|
{200, 0, 0x04}, {400, 0, 0x05}, {800, 0, 0x06},
|
|
{1600, 0, 0x07} };
|
|
|
|
/* Refer to section 4 of the specification */
|
|
static const struct {
|
|
int odr_bits;
|
|
int usec;
|
|
} odr_start_up_times[KX_MAX_CHIPS][12] = {
|
|
/* KXCJK-1013 */
|
|
{
|
|
{0x08, 100000},
|
|
{0x09, 100000},
|
|
{0x0A, 100000},
|
|
{0x0B, 100000},
|
|
{0, 80000},
|
|
{0x01, 41000},
|
|
{0x02, 21000},
|
|
{0x03, 11000},
|
|
{0x04, 6400},
|
|
{0x05, 3900},
|
|
{0x06, 2700},
|
|
{0x07, 2100},
|
|
},
|
|
/* KXCJ9-1008 */
|
|
{
|
|
{0x08, 100000},
|
|
{0x09, 100000},
|
|
{0x0A, 100000},
|
|
{0x0B, 100000},
|
|
{0, 80000},
|
|
{0x01, 41000},
|
|
{0x02, 21000},
|
|
{0x03, 11000},
|
|
{0x04, 6400},
|
|
{0x05, 3900},
|
|
{0x06, 2700},
|
|
{0x07, 2100},
|
|
},
|
|
/* KXCTJ2-1009 */
|
|
{
|
|
{0x08, 1240000},
|
|
{0x09, 621000},
|
|
{0x0A, 309000},
|
|
{0x0B, 151000},
|
|
{0, 80000},
|
|
{0x01, 41000},
|
|
{0x02, 21000},
|
|
{0x03, 11000},
|
|
{0x04, 6000},
|
|
{0x05, 4000},
|
|
{0x06, 3000},
|
|
{0x07, 2000},
|
|
},
|
|
};
|
|
|
|
static const struct {
|
|
u16 scale;
|
|
u8 gsel_0;
|
|
u8 gsel_1;
|
|
} KXCJK1013_scale_table[] = { {9582, 0, 0},
|
|
{19163, 1, 0},
|
|
{38326, 0, 1} };
|
|
|
|
static const struct {
|
|
int val;
|
|
int val2;
|
|
int odr_bits;
|
|
} wake_odr_data_rate_table[] = { {0, 781000, 0x00},
|
|
{1, 563000, 0x01},
|
|
{3, 125000, 0x02},
|
|
{6, 250000, 0x03},
|
|
{12, 500000, 0x04},
|
|
{25, 0, 0x05},
|
|
{50, 0, 0x06},
|
|
{100, 0, 0x06},
|
|
{200, 0, 0x06},
|
|
{400, 0, 0x06},
|
|
{800, 0, 0x06},
|
|
{1600, 0, 0x06} };
|
|
|
|
static int kxcjk1013_set_mode(struct kxcjk1013_data *data,
|
|
enum kxcjk1013_mode mode)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
|
|
return ret;
|
|
}
|
|
|
|
if (mode == STANDBY)
|
|
ret &= ~KXCJK1013_REG_CTRL1_BIT_PC1;
|
|
else
|
|
ret |= KXCJK1013_REG_CTRL1_BIT_PC1;
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client,
|
|
KXCJK1013_REG_CTRL1, ret);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error writing reg_ctrl1\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int kxcjk1013_get_mode(struct kxcjk1013_data *data,
|
|
enum kxcjk1013_mode *mode)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
|
|
return ret;
|
|
}
|
|
|
|
if (ret & KXCJK1013_REG_CTRL1_BIT_PC1)
|
|
*mode = OPERATION;
|
|
else
|
|
*mode = STANDBY;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int kxcjk1013_set_range(struct kxcjk1013_data *data, int range_index)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
|
|
return ret;
|
|
}
|
|
|
|
ret &= ~(KXCJK1013_REG_CTRL1_BIT_GSEL0 |
|
|
KXCJK1013_REG_CTRL1_BIT_GSEL1);
|
|
ret |= (KXCJK1013_scale_table[range_index].gsel_0 << 3);
|
|
ret |= (KXCJK1013_scale_table[range_index].gsel_1 << 4);
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client,
|
|
KXCJK1013_REG_CTRL1,
|
|
ret);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error writing reg_ctrl1\n");
|
|
return ret;
|
|
}
|
|
|
|
data->range = range_index;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int kxcjk1013_chip_init(struct kxcjk1013_data *data)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_WHO_AM_I);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error reading who_am_i\n");
|
|
return ret;
|
|
}
|
|
|
|
dev_dbg(&data->client->dev, "KXCJK1013 Chip Id %x\n", ret);
|
|
|
|
ret = kxcjk1013_set_mode(data, STANDBY);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Set 12 bit mode */
|
|
ret |= KXCJK1013_REG_CTRL1_BIT_RES;
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_CTRL1,
|
|
ret);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error reading reg_ctrl\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Setting range to 4G */
|
|
ret = kxcjk1013_set_range(data, KXCJK1013_RANGE_4G);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_DATA_CTRL);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error reading reg_data_ctrl\n");
|
|
return ret;
|
|
}
|
|
|
|
data->odr_bits = ret;
|
|
|
|
/* Set up INT polarity */
|
|
ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_CTRL1);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error reading reg_int_ctrl1\n");
|
|
return ret;
|
|
}
|
|
|
|
if (data->active_high_intr)
|
|
ret |= KXCJK1013_REG_INT_REG1_BIT_IEA;
|
|
else
|
|
ret &= ~KXCJK1013_REG_INT_REG1_BIT_IEA;
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_INT_CTRL1,
|
|
ret);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error writing reg_int_ctrl1\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = kxcjk1013_set_mode(data, OPERATION);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
data->wake_thres = KXCJK1013_DEFAULT_WAKE_THRES;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int kxcjk1013_get_startup_times(struct kxcjk1013_data *data)
|
|
{
|
|
int i;
|
|
int idx = data->chipset;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(odr_start_up_times[idx]); ++i) {
|
|
if (odr_start_up_times[idx][i].odr_bits == data->odr_bits)
|
|
return odr_start_up_times[idx][i].usec;
|
|
}
|
|
|
|
return KXCJK1013_MAX_STARTUP_TIME_US;
|
|
}
|
|
#endif
|
|
|
|
static int kxcjk1013_set_power_state(struct kxcjk1013_data *data, bool on)
|
|
{
|
|
#ifdef CONFIG_PM
|
|
int ret;
|
|
|
|
if (on)
|
|
ret = pm_runtime_get_sync(&data->client->dev);
|
|
else {
|
|
pm_runtime_mark_last_busy(&data->client->dev);
|
|
ret = pm_runtime_put_autosuspend(&data->client->dev);
|
|
}
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev,
|
|
"Failed: kxcjk1013_set_power_state for %d\n", on);
|
|
if (on)
|
|
pm_runtime_put_noidle(&data->client->dev);
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int kxcjk1013_chip_update_thresholds(struct kxcjk1013_data *data)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client,
|
|
KXCJK1013_REG_WAKE_TIMER,
|
|
data->wake_dur);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev,
|
|
"Error writing reg_wake_timer\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client,
|
|
KXCJK1013_REG_WAKE_THRES,
|
|
data->wake_thres);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error writing reg_wake_thres\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int kxcjk1013_setup_any_motion_interrupt(struct kxcjk1013_data *data,
|
|
bool status)
|
|
{
|
|
int ret;
|
|
enum kxcjk1013_mode store_mode;
|
|
|
|
ret = kxcjk1013_get_mode(data, &store_mode);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* This is requirement by spec to change state to STANDBY */
|
|
ret = kxcjk1013_set_mode(data, STANDBY);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = kxcjk1013_chip_update_thresholds(data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_CTRL1);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error reading reg_int_ctrl1\n");
|
|
return ret;
|
|
}
|
|
|
|
if (status)
|
|
ret |= KXCJK1013_REG_INT_REG1_BIT_IEN;
|
|
else
|
|
ret &= ~KXCJK1013_REG_INT_REG1_BIT_IEN;
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_INT_CTRL1,
|
|
ret);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error writing reg_int_ctrl1\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
|
|
return ret;
|
|
}
|
|
|
|
if (status)
|
|
ret |= KXCJK1013_REG_CTRL1_BIT_WUFE;
|
|
else
|
|
ret &= ~KXCJK1013_REG_CTRL1_BIT_WUFE;
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client,
|
|
KXCJK1013_REG_CTRL1, ret);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error writing reg_ctrl1\n");
|
|
return ret;
|
|
}
|
|
|
|
if (store_mode == OPERATION) {
|
|
ret = kxcjk1013_set_mode(data, OPERATION);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int kxcjk1013_setup_new_data_interrupt(struct kxcjk1013_data *data,
|
|
bool status)
|
|
{
|
|
int ret;
|
|
enum kxcjk1013_mode store_mode;
|
|
|
|
ret = kxcjk1013_get_mode(data, &store_mode);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* This is requirement by spec to change state to STANDBY */
|
|
ret = kxcjk1013_set_mode(data, STANDBY);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_CTRL1);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error reading reg_int_ctrl1\n");
|
|
return ret;
|
|
}
|
|
|
|
if (status)
|
|
ret |= KXCJK1013_REG_INT_REG1_BIT_IEN;
|
|
else
|
|
ret &= ~KXCJK1013_REG_INT_REG1_BIT_IEN;
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_INT_CTRL1,
|
|
ret);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error writing reg_int_ctrl1\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
|
|
return ret;
|
|
}
|
|
|
|
if (status)
|
|
ret |= KXCJK1013_REG_CTRL1_BIT_DRDY;
|
|
else
|
|
ret &= ~KXCJK1013_REG_CTRL1_BIT_DRDY;
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client,
|
|
KXCJK1013_REG_CTRL1, ret);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error writing reg_ctrl1\n");
|
|
return ret;
|
|
}
|
|
|
|
if (store_mode == OPERATION) {
|
|
ret = kxcjk1013_set_mode(data, OPERATION);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int kxcjk1013_convert_freq_to_bit(int val, int val2)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(samp_freq_table); ++i) {
|
|
if (samp_freq_table[i].val == val &&
|
|
samp_freq_table[i].val2 == val2) {
|
|
return samp_freq_table[i].odr_bits;
|
|
}
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int kxcjk1013_convert_wake_odr_to_bit(int val, int val2)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(wake_odr_data_rate_table); ++i) {
|
|
if (wake_odr_data_rate_table[i].val == val &&
|
|
wake_odr_data_rate_table[i].val2 == val2) {
|
|
return wake_odr_data_rate_table[i].odr_bits;
|
|
}
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int kxcjk1013_set_odr(struct kxcjk1013_data *data, int val, int val2)
|
|
{
|
|
int ret;
|
|
int odr_bits;
|
|
enum kxcjk1013_mode store_mode;
|
|
|
|
ret = kxcjk1013_get_mode(data, &store_mode);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
odr_bits = kxcjk1013_convert_freq_to_bit(val, val2);
|
|
if (odr_bits < 0)
|
|
return odr_bits;
|
|
|
|
/* To change ODR, the chip must be set to STANDBY as per spec */
|
|
ret = kxcjk1013_set_mode(data, STANDBY);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_DATA_CTRL,
|
|
odr_bits);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error writing data_ctrl\n");
|
|
return ret;
|
|
}
|
|
|
|
data->odr_bits = odr_bits;
|
|
|
|
odr_bits = kxcjk1013_convert_wake_odr_to_bit(val, val2);
|
|
if (odr_bits < 0)
|
|
return odr_bits;
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_CTRL2,
|
|
odr_bits);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error writing reg_ctrl2\n");
|
|
return ret;
|
|
}
|
|
|
|
if (store_mode == OPERATION) {
|
|
ret = kxcjk1013_set_mode(data, OPERATION);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int kxcjk1013_get_odr(struct kxcjk1013_data *data, int *val, int *val2)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(samp_freq_table); ++i) {
|
|
if (samp_freq_table[i].odr_bits == data->odr_bits) {
|
|
*val = samp_freq_table[i].val;
|
|
*val2 = samp_freq_table[i].val2;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
}
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int kxcjk1013_get_acc_reg(struct kxcjk1013_data *data, int axis)
|
|
{
|
|
u8 reg = KXCJK1013_REG_XOUT_L + axis * 2;
|
|
int ret;
|
|
|
|
ret = i2c_smbus_read_word_data(data->client, reg);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev,
|
|
"failed to read accel_%c registers\n", 'x' + axis);
|
|
return ret;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int kxcjk1013_set_scale(struct kxcjk1013_data *data, int val)
|
|
{
|
|
int ret, i;
|
|
enum kxcjk1013_mode store_mode;
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(KXCJK1013_scale_table); ++i) {
|
|
if (KXCJK1013_scale_table[i].scale == val) {
|
|
|
|
ret = kxcjk1013_get_mode(data, &store_mode);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = kxcjk1013_set_mode(data, STANDBY);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = kxcjk1013_set_range(data, i);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (store_mode == OPERATION) {
|
|
ret = kxcjk1013_set_mode(data, OPERATION);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int kxcjk1013_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan, int *val,
|
|
int *val2, long mask)
|
|
{
|
|
struct kxcjk1013_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
mutex_lock(&data->mutex);
|
|
if (iio_buffer_enabled(indio_dev))
|
|
ret = -EBUSY;
|
|
else {
|
|
ret = kxcjk1013_set_power_state(data, true);
|
|
if (ret < 0) {
|
|
mutex_unlock(&data->mutex);
|
|
return ret;
|
|
}
|
|
ret = kxcjk1013_get_acc_reg(data, chan->scan_index);
|
|
if (ret < 0) {
|
|
kxcjk1013_set_power_state(data, false);
|
|
mutex_unlock(&data->mutex);
|
|
return ret;
|
|
}
|
|
*val = sign_extend32(ret >> 4, 11);
|
|
ret = kxcjk1013_set_power_state(data, false);
|
|
}
|
|
mutex_unlock(&data->mutex);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return IIO_VAL_INT;
|
|
|
|
case IIO_CHAN_INFO_SCALE:
|
|
*val = 0;
|
|
*val2 = KXCJK1013_scale_table[data->range].scale;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
mutex_lock(&data->mutex);
|
|
ret = kxcjk1013_get_odr(data, val, val2);
|
|
mutex_unlock(&data->mutex);
|
|
return ret;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int kxcjk1013_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan, int val,
|
|
int val2, long mask)
|
|
{
|
|
struct kxcjk1013_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
mutex_lock(&data->mutex);
|
|
ret = kxcjk1013_set_odr(data, val, val2);
|
|
mutex_unlock(&data->mutex);
|
|
break;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
if (val)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&data->mutex);
|
|
ret = kxcjk1013_set_scale(data, val2);
|
|
mutex_unlock(&data->mutex);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int kxcjk1013_read_event(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
enum iio_event_type type,
|
|
enum iio_event_direction dir,
|
|
enum iio_event_info info,
|
|
int *val, int *val2)
|
|
{
|
|
struct kxcjk1013_data *data = iio_priv(indio_dev);
|
|
|
|
*val2 = 0;
|
|
switch (info) {
|
|
case IIO_EV_INFO_VALUE:
|
|
*val = data->wake_thres;
|
|
break;
|
|
case IIO_EV_INFO_PERIOD:
|
|
*val = data->wake_dur;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return IIO_VAL_INT;
|
|
}
|
|
|
|
static int kxcjk1013_write_event(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
enum iio_event_type type,
|
|
enum iio_event_direction dir,
|
|
enum iio_event_info info,
|
|
int val, int val2)
|
|
{
|
|
struct kxcjk1013_data *data = iio_priv(indio_dev);
|
|
|
|
if (data->ev_enable_state)
|
|
return -EBUSY;
|
|
|
|
switch (info) {
|
|
case IIO_EV_INFO_VALUE:
|
|
data->wake_thres = val;
|
|
break;
|
|
case IIO_EV_INFO_PERIOD:
|
|
data->wake_dur = val;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int kxcjk1013_read_event_config(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
enum iio_event_type type,
|
|
enum iio_event_direction dir)
|
|
{
|
|
|
|
struct kxcjk1013_data *data = iio_priv(indio_dev);
|
|
|
|
return data->ev_enable_state;
|
|
}
|
|
|
|
static int kxcjk1013_write_event_config(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
enum iio_event_type type,
|
|
enum iio_event_direction dir,
|
|
int state)
|
|
{
|
|
struct kxcjk1013_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
if (state && data->ev_enable_state)
|
|
return 0;
|
|
|
|
mutex_lock(&data->mutex);
|
|
|
|
if (!state && data->motion_trigger_on) {
|
|
data->ev_enable_state = 0;
|
|
mutex_unlock(&data->mutex);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* We will expect the enable and disable to do operation in
|
|
* in reverse order. This will happen here anyway as our
|
|
* resume operation uses sync mode runtime pm calls, the
|
|
* suspend operation will be delayed by autosuspend delay
|
|
* So the disable operation will still happen in reverse of
|
|
* enable operation. When runtime pm is disabled the mode
|
|
* is always on so sequence doesn't matter
|
|
*/
|
|
ret = kxcjk1013_set_power_state(data, state);
|
|
if (ret < 0) {
|
|
mutex_unlock(&data->mutex);
|
|
return ret;
|
|
}
|
|
|
|
ret = kxcjk1013_setup_any_motion_interrupt(data, state);
|
|
if (ret < 0) {
|
|
kxcjk1013_set_power_state(data, false);
|
|
data->ev_enable_state = 0;
|
|
mutex_unlock(&data->mutex);
|
|
return ret;
|
|
}
|
|
|
|
data->ev_enable_state = state;
|
|
mutex_unlock(&data->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int kxcjk1013_validate_trigger(struct iio_dev *indio_dev,
|
|
struct iio_trigger *trig)
|
|
{
|
|
struct kxcjk1013_data *data = iio_priv(indio_dev);
|
|
|
|
if (data->dready_trig != trig && data->motion_trig != trig)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
|
|
"0.781000 1.563000 3.125000 6.250000 12.500000 25 50 100 200 400 800 1600");
|
|
|
|
static IIO_CONST_ATTR(in_accel_scale_available, "0.009582 0.019163 0.038326");
|
|
|
|
static struct attribute *kxcjk1013_attributes[] = {
|
|
&iio_const_attr_sampling_frequency_available.dev_attr.attr,
|
|
&iio_const_attr_in_accel_scale_available.dev_attr.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group kxcjk1013_attrs_group = {
|
|
.attrs = kxcjk1013_attributes,
|
|
};
|
|
|
|
static const struct iio_event_spec kxcjk1013_event = {
|
|
.type = IIO_EV_TYPE_THRESH,
|
|
.dir = IIO_EV_DIR_EITHER,
|
|
.mask_separate = BIT(IIO_EV_INFO_VALUE) |
|
|
BIT(IIO_EV_INFO_ENABLE) |
|
|
BIT(IIO_EV_INFO_PERIOD)
|
|
};
|
|
|
|
#define KXCJK1013_CHANNEL(_axis) { \
|
|
.type = IIO_ACCEL, \
|
|
.modified = 1, \
|
|
.channel2 = IIO_MOD_##_axis, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
|
|
BIT(IIO_CHAN_INFO_SAMP_FREQ), \
|
|
.scan_index = AXIS_##_axis, \
|
|
.scan_type = { \
|
|
.sign = 's', \
|
|
.realbits = 12, \
|
|
.storagebits = 16, \
|
|
.shift = 4, \
|
|
.endianness = IIO_CPU, \
|
|
}, \
|
|
.event_spec = &kxcjk1013_event, \
|
|
.num_event_specs = 1 \
|
|
}
|
|
|
|
static const struct iio_chan_spec kxcjk1013_channels[] = {
|
|
KXCJK1013_CHANNEL(X),
|
|
KXCJK1013_CHANNEL(Y),
|
|
KXCJK1013_CHANNEL(Z),
|
|
IIO_CHAN_SOFT_TIMESTAMP(3),
|
|
};
|
|
|
|
static const struct iio_info kxcjk1013_info = {
|
|
.attrs = &kxcjk1013_attrs_group,
|
|
.read_raw = kxcjk1013_read_raw,
|
|
.write_raw = kxcjk1013_write_raw,
|
|
.read_event_value = kxcjk1013_read_event,
|
|
.write_event_value = kxcjk1013_write_event,
|
|
.write_event_config = kxcjk1013_write_event_config,
|
|
.read_event_config = kxcjk1013_read_event_config,
|
|
.validate_trigger = kxcjk1013_validate_trigger,
|
|
.driver_module = THIS_MODULE,
|
|
};
|
|
|
|
static irqreturn_t kxcjk1013_trigger_handler(int irq, void *p)
|
|
{
|
|
struct iio_poll_func *pf = p;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
struct kxcjk1013_data *data = iio_priv(indio_dev);
|
|
int bit, ret, i = 0;
|
|
|
|
mutex_lock(&data->mutex);
|
|
|
|
for_each_set_bit(bit, indio_dev->buffer->scan_mask,
|
|
indio_dev->masklength) {
|
|
ret = kxcjk1013_get_acc_reg(data, bit);
|
|
if (ret < 0) {
|
|
mutex_unlock(&data->mutex);
|
|
goto err;
|
|
}
|
|
data->buffer[i++] = ret;
|
|
}
|
|
mutex_unlock(&data->mutex);
|
|
|
|
iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
|
|
data->timestamp);
|
|
err:
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int kxcjk1013_trig_try_reen(struct iio_trigger *trig)
|
|
{
|
|
struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
|
|
struct kxcjk1013_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_REL);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error reading reg_int_rel\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int kxcjk1013_data_rdy_trigger_set_state(struct iio_trigger *trig,
|
|
bool state)
|
|
{
|
|
struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
|
|
struct kxcjk1013_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
mutex_lock(&data->mutex);
|
|
|
|
if (!state && data->ev_enable_state && data->motion_trigger_on) {
|
|
data->motion_trigger_on = false;
|
|
mutex_unlock(&data->mutex);
|
|
return 0;
|
|
}
|
|
|
|
ret = kxcjk1013_set_power_state(data, state);
|
|
if (ret < 0) {
|
|
mutex_unlock(&data->mutex);
|
|
return ret;
|
|
}
|
|
if (data->motion_trig == trig)
|
|
ret = kxcjk1013_setup_any_motion_interrupt(data, state);
|
|
else
|
|
ret = kxcjk1013_setup_new_data_interrupt(data, state);
|
|
if (ret < 0) {
|
|
kxcjk1013_set_power_state(data, false);
|
|
mutex_unlock(&data->mutex);
|
|
return ret;
|
|
}
|
|
if (data->motion_trig == trig)
|
|
data->motion_trigger_on = state;
|
|
else
|
|
data->dready_trigger_on = state;
|
|
|
|
mutex_unlock(&data->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct iio_trigger_ops kxcjk1013_trigger_ops = {
|
|
.set_trigger_state = kxcjk1013_data_rdy_trigger_set_state,
|
|
.try_reenable = kxcjk1013_trig_try_reen,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static irqreturn_t kxcjk1013_event_handler(int irq, void *private)
|
|
{
|
|
struct iio_dev *indio_dev = private;
|
|
struct kxcjk1013_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_SRC1);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error reading reg_int_src1\n");
|
|
goto ack_intr;
|
|
}
|
|
|
|
if (ret & 0x02) {
|
|
ret = i2c_smbus_read_byte_data(data->client,
|
|
KXCJK1013_REG_INT_SRC2);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev,
|
|
"Error reading reg_int_src2\n");
|
|
goto ack_intr;
|
|
}
|
|
|
|
if (ret & KXCJK1013_REG_INT_SRC2_BIT_XN)
|
|
iio_push_event(indio_dev,
|
|
IIO_MOD_EVENT_CODE(IIO_ACCEL,
|
|
0,
|
|
IIO_MOD_X,
|
|
IIO_EV_TYPE_THRESH,
|
|
IIO_EV_DIR_FALLING),
|
|
data->timestamp);
|
|
if (ret & KXCJK1013_REG_INT_SRC2_BIT_XP)
|
|
iio_push_event(indio_dev,
|
|
IIO_MOD_EVENT_CODE(IIO_ACCEL,
|
|
0,
|
|
IIO_MOD_X,
|
|
IIO_EV_TYPE_THRESH,
|
|
IIO_EV_DIR_RISING),
|
|
data->timestamp);
|
|
|
|
|
|
if (ret & KXCJK1013_REG_INT_SRC2_BIT_YN)
|
|
iio_push_event(indio_dev,
|
|
IIO_MOD_EVENT_CODE(IIO_ACCEL,
|
|
0,
|
|
IIO_MOD_Y,
|
|
IIO_EV_TYPE_THRESH,
|
|
IIO_EV_DIR_FALLING),
|
|
data->timestamp);
|
|
if (ret & KXCJK1013_REG_INT_SRC2_BIT_YP)
|
|
iio_push_event(indio_dev,
|
|
IIO_MOD_EVENT_CODE(IIO_ACCEL,
|
|
0,
|
|
IIO_MOD_Y,
|
|
IIO_EV_TYPE_THRESH,
|
|
IIO_EV_DIR_RISING),
|
|
data->timestamp);
|
|
|
|
if (ret & KXCJK1013_REG_INT_SRC2_BIT_ZN)
|
|
iio_push_event(indio_dev,
|
|
IIO_MOD_EVENT_CODE(IIO_ACCEL,
|
|
0,
|
|
IIO_MOD_Z,
|
|
IIO_EV_TYPE_THRESH,
|
|
IIO_EV_DIR_FALLING),
|
|
data->timestamp);
|
|
if (ret & KXCJK1013_REG_INT_SRC2_BIT_ZP)
|
|
iio_push_event(indio_dev,
|
|
IIO_MOD_EVENT_CODE(IIO_ACCEL,
|
|
0,
|
|
IIO_MOD_Z,
|
|
IIO_EV_TYPE_THRESH,
|
|
IIO_EV_DIR_RISING),
|
|
data->timestamp);
|
|
}
|
|
|
|
ack_intr:
|
|
if (data->dready_trigger_on)
|
|
return IRQ_HANDLED;
|
|
|
|
ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_REL);
|
|
if (ret < 0)
|
|
dev_err(&data->client->dev, "Error reading reg_int_rel\n");
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t kxcjk1013_data_rdy_trig_poll(int irq, void *private)
|
|
{
|
|
struct iio_dev *indio_dev = private;
|
|
struct kxcjk1013_data *data = iio_priv(indio_dev);
|
|
|
|
data->timestamp = iio_get_time_ns();
|
|
|
|
if (data->dready_trigger_on)
|
|
iio_trigger_poll(data->dready_trig);
|
|
else if (data->motion_trigger_on)
|
|
iio_trigger_poll(data->motion_trig);
|
|
|
|
if (data->ev_enable_state)
|
|
return IRQ_WAKE_THREAD;
|
|
else
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static const char *kxcjk1013_match_acpi_device(struct device *dev,
|
|
enum kx_chipset *chipset,
|
|
bool *is_smo8500_device)
|
|
{
|
|
const struct acpi_device_id *id;
|
|
|
|
id = acpi_match_device(dev->driver->acpi_match_table, dev);
|
|
if (!id)
|
|
return NULL;
|
|
if (strcmp(id->id, "SMO8500") == 0)
|
|
*is_smo8500_device = true;
|
|
*chipset = (enum kx_chipset)id->driver_data;
|
|
|
|
return dev_name(dev);
|
|
}
|
|
|
|
static int kxcjk1013_gpio_probe(struct i2c_client *client,
|
|
struct kxcjk1013_data *data)
|
|
{
|
|
struct device *dev;
|
|
struct gpio_desc *gpio;
|
|
int ret;
|
|
|
|
if (!client)
|
|
return -EINVAL;
|
|
if (data->is_smo8500_device)
|
|
return -ENOTSUPP;
|
|
|
|
dev = &client->dev;
|
|
|
|
/* data ready gpio interrupt pin */
|
|
gpio = devm_gpiod_get_index(dev, "kxcjk1013_int", 0);
|
|
if (IS_ERR(gpio)) {
|
|
dev_err(dev, "acpi gpio get index failed\n");
|
|
return PTR_ERR(gpio);
|
|
}
|
|
|
|
ret = gpiod_direction_input(gpio);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = gpiod_to_irq(gpio);
|
|
|
|
dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int kxcjk1013_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct kxcjk1013_data *data;
|
|
struct iio_dev *indio_dev;
|
|
struct kxcjk_1013_platform_data *pdata;
|
|
const char *name;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
data = iio_priv(indio_dev);
|
|
i2c_set_clientdata(client, indio_dev);
|
|
data->client = client;
|
|
|
|
pdata = dev_get_platdata(&client->dev);
|
|
if (pdata)
|
|
data->active_high_intr = pdata->active_high_intr;
|
|
else
|
|
data->active_high_intr = true; /* default polarity */
|
|
|
|
if (id) {
|
|
data->chipset = (enum kx_chipset)(id->driver_data);
|
|
name = id->name;
|
|
} else if (ACPI_HANDLE(&client->dev)) {
|
|
name = kxcjk1013_match_acpi_device(&client->dev,
|
|
&data->chipset,
|
|
&data->is_smo8500_device);
|
|
} else
|
|
return -ENODEV;
|
|
|
|
ret = kxcjk1013_chip_init(data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
mutex_init(&data->mutex);
|
|
|
|
indio_dev->dev.parent = &client->dev;
|
|
indio_dev->channels = kxcjk1013_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(kxcjk1013_channels);
|
|
indio_dev->name = name;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->info = &kxcjk1013_info;
|
|
|
|
if (client->irq < 0)
|
|
client->irq = kxcjk1013_gpio_probe(client, data);
|
|
|
|
if (client->irq >= 0) {
|
|
ret = devm_request_threaded_irq(&client->dev, client->irq,
|
|
kxcjk1013_data_rdy_trig_poll,
|
|
kxcjk1013_event_handler,
|
|
IRQF_TRIGGER_RISING,
|
|
KXCJK1013_IRQ_NAME,
|
|
indio_dev);
|
|
if (ret)
|
|
goto err_poweroff;
|
|
|
|
data->dready_trig = devm_iio_trigger_alloc(&client->dev,
|
|
"%s-dev%d",
|
|
indio_dev->name,
|
|
indio_dev->id);
|
|
if (!data->dready_trig) {
|
|
ret = -ENOMEM;
|
|
goto err_poweroff;
|
|
}
|
|
|
|
data->motion_trig = devm_iio_trigger_alloc(&client->dev,
|
|
"%s-any-motion-dev%d",
|
|
indio_dev->name,
|
|
indio_dev->id);
|
|
if (!data->motion_trig) {
|
|
ret = -ENOMEM;
|
|
goto err_poweroff;
|
|
}
|
|
|
|
data->dready_trig->dev.parent = &client->dev;
|
|
data->dready_trig->ops = &kxcjk1013_trigger_ops;
|
|
iio_trigger_set_drvdata(data->dready_trig, indio_dev);
|
|
indio_dev->trig = data->dready_trig;
|
|
iio_trigger_get(indio_dev->trig);
|
|
ret = iio_trigger_register(data->dready_trig);
|
|
if (ret)
|
|
goto err_poweroff;
|
|
|
|
data->motion_trig->dev.parent = &client->dev;
|
|
data->motion_trig->ops = &kxcjk1013_trigger_ops;
|
|
iio_trigger_set_drvdata(data->motion_trig, indio_dev);
|
|
ret = iio_trigger_register(data->motion_trig);
|
|
if (ret) {
|
|
data->motion_trig = NULL;
|
|
goto err_trigger_unregister;
|
|
}
|
|
|
|
ret = iio_triggered_buffer_setup(indio_dev,
|
|
&iio_pollfunc_store_time,
|
|
kxcjk1013_trigger_handler,
|
|
NULL);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev,
|
|
"iio triggered buffer setup failed\n");
|
|
goto err_trigger_unregister;
|
|
}
|
|
}
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "unable to register iio device\n");
|
|
goto err_buffer_cleanup;
|
|
}
|
|
|
|
ret = pm_runtime_set_active(&client->dev);
|
|
if (ret)
|
|
goto err_iio_unregister;
|
|
|
|
pm_runtime_enable(&client->dev);
|
|
pm_runtime_set_autosuspend_delay(&client->dev,
|
|
KXCJK1013_SLEEP_DELAY_MS);
|
|
pm_runtime_use_autosuspend(&client->dev);
|
|
|
|
return 0;
|
|
|
|
err_iio_unregister:
|
|
iio_device_unregister(indio_dev);
|
|
err_buffer_cleanup:
|
|
if (data->dready_trig)
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
err_trigger_unregister:
|
|
if (data->dready_trig)
|
|
iio_trigger_unregister(data->dready_trig);
|
|
if (data->motion_trig)
|
|
iio_trigger_unregister(data->motion_trig);
|
|
err_poweroff:
|
|
kxcjk1013_set_mode(data, STANDBY);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int kxcjk1013_remove(struct i2c_client *client)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(client);
|
|
struct kxcjk1013_data *data = iio_priv(indio_dev);
|
|
|
|
pm_runtime_disable(&client->dev);
|
|
pm_runtime_set_suspended(&client->dev);
|
|
pm_runtime_put_noidle(&client->dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
|
|
if (data->dready_trig) {
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
iio_trigger_unregister(data->dready_trig);
|
|
iio_trigger_unregister(data->motion_trig);
|
|
}
|
|
|
|
mutex_lock(&data->mutex);
|
|
kxcjk1013_set_mode(data, STANDBY);
|
|
mutex_unlock(&data->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int kxcjk1013_suspend(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
|
|
struct kxcjk1013_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
mutex_lock(&data->mutex);
|
|
ret = kxcjk1013_set_mode(data, STANDBY);
|
|
mutex_unlock(&data->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int kxcjk1013_resume(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
|
|
struct kxcjk1013_data *data = iio_priv(indio_dev);
|
|
int ret = 0;
|
|
|
|
mutex_lock(&data->mutex);
|
|
ret = kxcjk1013_set_mode(data, OPERATION);
|
|
mutex_unlock(&data->mutex);
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PM
|
|
static int kxcjk1013_runtime_suspend(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
|
|
struct kxcjk1013_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
ret = kxcjk1013_set_mode(data, STANDBY);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "powering off device failed\n");
|
|
return -EAGAIN;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int kxcjk1013_runtime_resume(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
|
|
struct kxcjk1013_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
int sleep_val;
|
|
|
|
ret = kxcjk1013_set_mode(data, OPERATION);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
sleep_val = kxcjk1013_get_startup_times(data);
|
|
if (sleep_val < 20000)
|
|
usleep_range(sleep_val, 20000);
|
|
else
|
|
msleep_interruptible(sleep_val/1000);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct dev_pm_ops kxcjk1013_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(kxcjk1013_suspend, kxcjk1013_resume)
|
|
SET_RUNTIME_PM_OPS(kxcjk1013_runtime_suspend,
|
|
kxcjk1013_runtime_resume, NULL)
|
|
};
|
|
|
|
static const struct acpi_device_id kx_acpi_match[] = {
|
|
{"KXCJ1013", KXCJK1013},
|
|
{"KXCJ1008", KXCJ91008},
|
|
{"KXTJ1009", KXTJ21009},
|
|
{"SMO8500", KXCJ91008},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, kx_acpi_match);
|
|
|
|
static const struct i2c_device_id kxcjk1013_id[] = {
|
|
{"kxcjk1013", KXCJK1013},
|
|
{"kxcj91008", KXCJ91008},
|
|
{"kxtj21009", KXTJ21009},
|
|
{"SMO8500", KXCJ91008},
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, kxcjk1013_id);
|
|
|
|
static struct i2c_driver kxcjk1013_driver = {
|
|
.driver = {
|
|
.name = KXCJK1013_DRV_NAME,
|
|
.acpi_match_table = ACPI_PTR(kx_acpi_match),
|
|
.pm = &kxcjk1013_pm_ops,
|
|
},
|
|
.probe = kxcjk1013_probe,
|
|
.remove = kxcjk1013_remove,
|
|
.id_table = kxcjk1013_id,
|
|
};
|
|
module_i2c_driver(kxcjk1013_driver);
|
|
|
|
MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("KXCJK1013 accelerometer driver");
|