OpenCloudOS-Kernel/arch/arm/boot/dts/kirkwood-guruplug-server-pl...

129 lines
2.2 KiB
Plaintext

/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "Globalscale Technologies Guruplug Server Plus";
compatible = "globalscale,guruplug-server-plus", "globalscale,guruplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
pmx_led_health_r: pmx-led-health-r {
marvell,pins = "mpp46";
marvell,function = "gpio";
};
pmx_led_health_g: pmx-led-health-g {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
pmx_led_wmode_r: pmx-led-wmode-r {
marvell,pins = "mpp48";
marvell,function = "gpio";
};
pmx_led_wmode_g: pmx-led-wmode-g {
marvell,pins = "mpp49";
marvell,function = "gpio";
};
};
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
};
sata@80000 {
status = "okay";
nr-ports = <1>;
};
mvsdio@90000 {
status = "okay";
/* No CD or WP GPIOs */
broken-cd;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g
&pmx_led_wmode_r &pmx_led_wmode_g >;
pinctrl-names = "default";
health-r {
label = "guruplug:red:health";
gpios = <&gpio1 14 1>;
};
health-g {
label = "guruplug:green:health";
gpios = <&gpio1 15 1>;
};
wmode-r {
label = "guruplug:red:wmode";
gpios = <&gpio1 16 1>;
};
wmode-g {
label = "guruplug:green:wmode";
gpios = <&gpio1 17 1>;
};
};
};
&nand {
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x00000000 0x00100000>;
read-only;
};
partition@100000 {
label = "uImage";
reg = <0x00100000 0x00400000>;
};
partition@500000 {
label = "data";
reg = <0x00500000 0x1fb00000>;
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
compatible = "marvell,88e1121";
reg = <0>;
};
ethphy1: ethernet-phy@1 {
device_type = "ethernet-phy";
compatible = "marvell,88e1121";
reg = <1>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
};
};