Lothar Waßmann 8035691365 usb: musb: dsps: fix the base address for accessing the mode register ... commit 943c13971c "usb: musb: dsps: implement ->set_mode()" should have made it possible to use the driver with boards that have the USBID pin unconnected. This doesn't actually work, since the driver uses the wrong base address to access the mode register. Furthermore it uses different base addresses in different places to access the same register (phy_utmi). Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Felipe Balbi <balbi@ti.com>		2014-06-30 13:31:48 -05:00
..
Kconfig	usb: musb: omap2plus bus glue needs USB host support	2014-05-14 09:23:32 -05:00
Makefile	usb: musb: add support for JZ4740 usb device controller	2013-12-20 09:53:24 -06:00
am35x.c	usb: phy: generic: allow multiples calls to usb_phy_generic_register()	2014-04-21 14:07:25 -05:00
blackfin.c	usb: phy: generic: allow multiples calls to usb_phy_generic_register()	2014-04-21 14:07:25 -05:00
blackfin.h	usb: musb: drop a gigantic amount of ifdeferry	2011-07-01 14:31:10 -07:00
cppi_dma.c	usb: musb: dma: merge ->start/stop into create/destroy	2013-07-29 13:53:18 +03:00
cppi_dma.h	…
da8xx.c	usb: phy: generic: allow multiples calls to usb_phy_generic_register()	2014-04-21 14:07:25 -05:00
davinci.c	usb: musb: move usb_phy_generic_{un,}register calls to probe()/remove()	2014-04-21 14:07:25 -05:00
davinci.h	usb: musb: davinci: Fix build breakage	2012-06-04 18:29:42 +03:00
jz4740.c	usb: musb: add support for JZ4740 usb device controller	2013-12-20 09:53:24 -06:00
musb_am335x.c	usb: musb: Fix panic upon musb_am335x module removal	2014-06-27 10:53:06 -05:00
musb_core.c	usb: musb: core: Handle Babble condition only in HOST mode	2014-06-19 15:43:07 -05:00
musb_core.h	usb: musb: tusb6010: Add tusb_revision to struct musb to store the revision.	2014-05-16 12:14:55 -05:00
musb_cppi41.c	usb: musb: Ensure that cppi41 timer gets armed on premature DMA TX irq	2014-06-27 10:53:37 -05:00
musb_debug.h	usb: musb: remove extern qualifier from musb_debug.h header	2011-12-21 13:21:02 +02:00
musb_debugfs.c	usb: remove use of __devinit	2012-11-21 13:27:16 -08:00
musb_dma.h	usb: musb dma: add cppi41 dma driver	2013-08-09 17:40:16 +03:00
musb_dsps.c	usb: musb: dsps: fix the base address for accessing the mode register	2014-06-30 13:31:48 -05:00
musb_gadget.c	usb: musb: fix setting JZ4740 gadget periphal mode on reset	2013-12-20 09:53:59 -06:00
musb_gadget.h	usb: musb: add Kconfig options for HOST, GAGDET or DUAL_ROLE modes	2013-05-28 19:22:23 +03:00
musb_gadget_ep0.c	usb: musb: gadget: read ep0 fifo only if rxcount is non zero	2013-04-02 11:42:50 +03:00
musb_host.c	usb: patches for v3.15	2014-03-07 16:47:36 -08:00
musb_host.h	usb: musb: fix prototype for musb_port_reset	2013-12-20 15:05:43 -06:00
musb_io.h	usb: musb: use io{read,write}*_rep accessors	2012-12-17 17:15:13 -08:00
musb_regs.h	usb: musb: tusb6010: fix compilation	2011-08-12 11:52:50 +03:00
musb_virthub.c	usb: musb: correct use of schedule_delayed_work()	2014-02-20 09:17:24 -06:00
musbhsdma.c	usb: musb: dma: merge ->start/stop into create/destroy	2013-07-29 13:53:18 +03:00
musbhsdma.h	usb: musb: remove generic_interrupt	2012-11-06 15:32:13 +02:00
omap2430.c	usb: musb: omap2430: make sure clocks are enabled when running mailbox	2014-04-15 12:08:02 -05:00
omap2430.h	usb: start using the control module driver	2013-01-25 12:27:24 +02:00
tusb6010.c	usb: musb: tusb6010: Use musb->tusb_revision instead of tusb_get_revision call.	2014-05-16 12:16:31 -05:00
tusb6010.h	usb: musb: tusb6010: Use musb->tusb_revision instead of tusb_get_revision call.	2014-05-16 12:16:31 -05:00
tusb6010_omap.c	usb: musb: tusb6010: Use musb->tusb_revision instead of tusb_get_revision call.	2014-05-16 12:16:31 -05:00
ux500.c	usb: musb: ux500: don't propagate the OF node	2014-06-19 10:06:47 -05:00
ux500_dma.c	usb: musb: ux500_dma: fix potential NULL dereference error	2013-12-17 13:17:42 -06:00