OpenCloudOS-Kernel/drivers/pinctrl/sunxi
Chen-Yu Tsai 10098709b4 pinctrl: sunxi: Correct number of IRQ banks on H6 main pin controller
The H6 main pin controller has four banks of interrupt-triggering pins.
The driver as originally submitted only specified three, but had pin
descriptions referencing a fourth bank. This results in a out-of-bounds
access into .irq_array of struct sunxi_pinctrl. This however did not
result in a crash until v4.20, with commit a66d972465 ("devres: Align
data[] to ARCH_KMALLOC_MINALIGN"), which changed the alignment of memory
region returned by devm_kcalloc(). The increase likely moved the
out-of-bounds access into the next, unmapped page.

With KASAN on, the bug is quite clear:

    BUG: KASAN: slab-out-of-bounds in sunxi_pinctrl_init_with_variant+0x49c/0x12b8
    Write of size 4 at addr ffff80002c680280 by task swapper/0/1

    CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc1-00016-gc480a5e6a077 #3
    Hardware name: OrangePi Lite2 (DT)
    Call trace:
     dump_backtrace+0x0/0x220
     show_stack+0x14/0x20
     dump_stack+0xac/0xd4
     print_address_description+0x60/0x25c
     kasan_report+0x14c/0x1ac
     __asan_store4+0x80/0xa0
     sunxi_pinctrl_init_with_variant+0x49c/0x12b8
     h6_pinctrl_probe+0x18/0x20
     platform_drv_probe+0x6c/0xc8
     really_probe+0x244/0x4b0
     driver_probe_device.part.4+0x11c/0x164
     __driver_attach+0x120/0x190
     bus_for_each_dev+0xe8/0x158
     driver_attach+0x30/0x40
     bus_add_driver+0x308/0x318
     driver_register+0xbc/0x1d0
     __platform_driver_register+0x7c/0x88
     h6_pinctrl_driver_init+0x18/0x20
     do_one_initcall+0xd4/0x208
     kernel_init_freeable+0x230/0x2c8
     kernel_init+0x10/0x108
     ret_from_fork+0x10/0x1c

    Allocated by task 1:
     kasan_kmalloc.part.0+0x4c/0x100
     kasan_kmalloc+0xc4/0xe8
     kasan_slab_alloc+0x14/0x20
     __kmalloc_track_caller+0x130/0x238
     devm_kmalloc+0x34/0xd0
     sunxi_pinctrl_init_with_variant+0x1d8/0x12b8
     h6_pinctrl_probe+0x18/0x20
     platform_drv_probe+0x6c/0xc8
     really_probe+0x244/0x4b0
     driver_probe_device.part.4+0x11c/0x164
     __driver_attach+0x120/0x190
     bus_for_each_dev+0xe8/0x158
     driver_attach+0x30/0x40
     bus_add_driver+0x308/0x318
     driver_register+0xbc/0x1d0
     __platform_driver_register+0x7c/0x88
     h6_pinctrl_driver_init+0x18/0x20
     do_one_initcall+0xd4/0x208
     kernel_init_freeable+0x230/0x2c8
     kernel_init+0x10/0x108
     ret_from_fork+0x10/0x1c

    Freed by task 0:
    (stack is not available)

    The buggy address belongs to the object at ffff80002c680080
     which belongs to the cache kmalloc-512 of size 512
    The buggy address is located 0 bytes to the right of
     512-byte region [ffff80002c680080, ffff80002c680280)
    The buggy address belongs to the page:
    page:ffff7e0000b1a000 count:1 mapcount:0 mapping:ffff80002e00c780 index:0xffff80002c683c80 compound_mapcount: 0
    flags: 0x10200(slab|head)
    raw: 0000000000010200 ffff80002e003a10 ffff80002e003a10 ffff80002e00c780
    raw: ffff80002c683c80 0000000000100001 00000001ffffffff 0000000000000000
    page dumped because: kasan: bad access detected

    Memory state around the buggy address:
     ffff80002c680180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
     ffff80002c680200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    >ffff80002c680280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
		       ^
     ffff80002c680300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
     ffff80002c680380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

Correct the number of IRQ banks so there are no more mismatches.

Fixes: c8a8309049 ("pinctrl: sunxi: add support for the Allwinner H6 main pin controller")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-22 10:52:39 +01:00
..
Kconfig pinctrl: sunxi: add support for suniv F1C100s (newer F-series SoCs) 2018-11-25 13:49:10 +01:00
Makefile pinctrl: sunxi: add support for suniv F1C100s (newer F-series SoCs) 2018-11-25 13:49:10 +01:00
pinctrl-sun4i-a10.c pinctrl: sunxi: fix a typo when merging A20 support to A10 driver 2017-12-28 15:06:01 +01:00
pinctrl-sun5i.c pinctrl: sunxi: Disable strict mode for old pinctrl drivers 2017-10-31 09:45:00 +01:00
pinctrl-sun6i-a31-r.c pinctrl: sunxi: Disable strict mode for old pinctrl drivers 2017-10-31 09:45:00 +01:00
pinctrl-sun6i-a31.c pinctrl: sunxi: Disable strict mode for old pinctrl drivers 2017-10-31 09:45:00 +01:00
pinctrl-sun8i-a23-r.c pinctrl: sunxi: Disable strict mode for old pinctrl drivers 2017-10-31 09:45:00 +01:00
pinctrl-sun8i-a23.c pinctrl: sunxi: Disable strict mode for old pinctrl drivers 2017-10-31 09:45:00 +01:00
pinctrl-sun8i-a33.c pinctrl: sunxi: change irq_bank_base to irq_bank_map 2018-03-27 15:07:49 +02:00
pinctrl-sun8i-a83t-r.c pinctrl: sunxi: Add support for A83T R_PIO 2017-06-09 11:20:32 +02:00
pinctrl-sun8i-a83t.c pinctrl: sunxi: a83t: Fix IRQ offset typo for PH11 2018-12-07 13:32:19 +01:00
pinctrl-sun8i-h3-r.c pinctrl: sunxi: Disable strict mode for old pinctrl drivers 2017-10-31 09:45:00 +01:00
pinctrl-sun8i-h3.c pinctrl: sunxi: Disable strict mode for old pinctrl drivers 2017-10-31 09:45:00 +01:00
pinctrl-sun8i-v3s.c pinctrl: sunxi: change irq_bank_base to irq_bank_map 2018-03-27 15:07:49 +02:00
pinctrl-sun9i-a80-r.c pinctrl: sunxi: Disable strict mode for old pinctrl drivers 2017-10-31 09:45:00 +01:00
pinctrl-sun9i-a80.c pinctrl: sunxi: Fix A80 interrupt pin bank 2017-11-30 16:47:37 +01:00
pinctrl-sun50i-a64-r.c pinctrl: sunxi: Add A64 R_PIO controller support 2017-03-14 14:42:24 +01:00
pinctrl-sun50i-a64.c pinctrl: sunxi: a64: Rename function ts0 to ts 2018-12-07 13:29:28 +01:00
pinctrl-sun50i-h5.c pinctrl: sunxi: Disable strict mode for H5 driver 2017-11-30 16:50:43 +01:00
pinctrl-sun50i-h6-r.c pinctrl: sunxi: add support for H6 R_PIO pin controller 2018-05-16 14:19:13 +02:00
pinctrl-sun50i-h6.c pinctrl: sunxi: Correct number of IRQ banks on H6 main pin controller 2019-01-22 10:52:39 +01:00
pinctrl-suniv-f1c100s.c pinctrl: sunxi: add support for suniv F1C100s (newer F-series SoCs) 2018-11-25 13:49:10 +01:00
pinctrl-sunxi.c pinctrl: sunxi: Consider pin_base when calculating regulator array index 2019-01-14 16:12:59 +01:00
pinctrl-sunxi.h pinctrl: sunxi: Consider pin_base when calculating regulator array index 2019-01-14 16:12:59 +01:00