8919 lines
245 KiB
C
8919 lines
245 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* HD audio interface patch for Creative CA0132 chip
|
|
*
|
|
* Copyright (c) 2011, Creative Technology Ltd.
|
|
*
|
|
* Based on patch_ca0110.c
|
|
* Copyright (c) 2008 Takashi Iwai <tiwai@suse.de>
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/module.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/io.h>
|
|
#include <linux/pci.h>
|
|
#include <asm/io.h>
|
|
#include <sound/core.h>
|
|
#include <sound/hda_codec.h>
|
|
#include "hda_local.h"
|
|
#include "hda_auto_parser.h"
|
|
#include "hda_jack.h"
|
|
|
|
#include "ca0132_regs.h"
|
|
|
|
/* Enable this to see controls for tuning purpose. */
|
|
/*#define ENABLE_TUNING_CONTROLS*/
|
|
|
|
#ifdef ENABLE_TUNING_CONTROLS
|
|
#include <sound/tlv.h>
|
|
#endif
|
|
|
|
#define FLOAT_ZERO 0x00000000
|
|
#define FLOAT_ONE 0x3f800000
|
|
#define FLOAT_TWO 0x40000000
|
|
#define FLOAT_THREE 0x40400000
|
|
#define FLOAT_EIGHT 0x41000000
|
|
#define FLOAT_MINUS_5 0xc0a00000
|
|
|
|
#define UNSOL_TAG_DSP 0x16
|
|
|
|
#define DSP_DMA_WRITE_BUFLEN_INIT (1UL<<18)
|
|
#define DSP_DMA_WRITE_BUFLEN_OVLY (1UL<<15)
|
|
|
|
#define DMA_TRANSFER_FRAME_SIZE_NWORDS 8
|
|
#define DMA_TRANSFER_MAX_FRAME_SIZE_NWORDS 32
|
|
#define DMA_OVERLAY_FRAME_SIZE_NWORDS 2
|
|
|
|
#define MASTERCONTROL 0x80
|
|
#define MASTERCONTROL_ALLOC_DMA_CHAN 10
|
|
#define MASTERCONTROL_QUERY_SPEAKER_EQ_ADDRESS 60
|
|
|
|
#define WIDGET_CHIP_CTRL 0x15
|
|
#define WIDGET_DSP_CTRL 0x16
|
|
|
|
#define MEM_CONNID_MICIN1 3
|
|
#define MEM_CONNID_MICIN2 5
|
|
#define MEM_CONNID_MICOUT1 12
|
|
#define MEM_CONNID_MICOUT2 14
|
|
#define MEM_CONNID_WUH 10
|
|
#define MEM_CONNID_DSP 16
|
|
#define MEM_CONNID_DMIC 100
|
|
|
|
#define SCP_SET 0
|
|
#define SCP_GET 1
|
|
|
|
#define EFX_FILE "ctefx.bin"
|
|
#define DESKTOP_EFX_FILE "ctefx-desktop.bin"
|
|
#define R3DI_EFX_FILE "ctefx-r3di.bin"
|
|
|
|
#ifdef CONFIG_SND_HDA_CODEC_CA0132_DSP
|
|
MODULE_FIRMWARE(EFX_FILE);
|
|
MODULE_FIRMWARE(DESKTOP_EFX_FILE);
|
|
MODULE_FIRMWARE(R3DI_EFX_FILE);
|
|
#endif
|
|
|
|
static const char *const dirstr[2] = { "Playback", "Capture" };
|
|
|
|
#define NUM_OF_OUTPUTS 3
|
|
enum {
|
|
SPEAKER_OUT,
|
|
HEADPHONE_OUT,
|
|
SURROUND_OUT
|
|
};
|
|
|
|
enum {
|
|
DIGITAL_MIC,
|
|
LINE_MIC_IN
|
|
};
|
|
|
|
/* Strings for Input Source Enum Control */
|
|
static const char *const in_src_str[3] = { "Microphone", "Line In", "Front Microphone" };
|
|
#define IN_SRC_NUM_OF_INPUTS 3
|
|
enum {
|
|
REAR_MIC,
|
|
REAR_LINE_IN,
|
|
FRONT_MIC,
|
|
};
|
|
|
|
enum {
|
|
#define VNODE_START_NID 0x80
|
|
VNID_SPK = VNODE_START_NID, /* Speaker vnid */
|
|
VNID_MIC,
|
|
VNID_HP_SEL,
|
|
VNID_AMIC1_SEL,
|
|
VNID_HP_ASEL,
|
|
VNID_AMIC1_ASEL,
|
|
VNODE_END_NID,
|
|
#define VNODES_COUNT (VNODE_END_NID - VNODE_START_NID)
|
|
|
|
#define EFFECT_START_NID 0x90
|
|
#define OUT_EFFECT_START_NID EFFECT_START_NID
|
|
SURROUND = OUT_EFFECT_START_NID,
|
|
CRYSTALIZER,
|
|
DIALOG_PLUS,
|
|
SMART_VOLUME,
|
|
X_BASS,
|
|
EQUALIZER,
|
|
OUT_EFFECT_END_NID,
|
|
#define OUT_EFFECTS_COUNT (OUT_EFFECT_END_NID - OUT_EFFECT_START_NID)
|
|
|
|
#define IN_EFFECT_START_NID OUT_EFFECT_END_NID
|
|
ECHO_CANCELLATION = IN_EFFECT_START_NID,
|
|
VOICE_FOCUS,
|
|
MIC_SVM,
|
|
NOISE_REDUCTION,
|
|
IN_EFFECT_END_NID,
|
|
#define IN_EFFECTS_COUNT (IN_EFFECT_END_NID - IN_EFFECT_START_NID)
|
|
|
|
VOICEFX = IN_EFFECT_END_NID,
|
|
PLAY_ENHANCEMENT,
|
|
CRYSTAL_VOICE,
|
|
EFFECT_END_NID,
|
|
OUTPUT_SOURCE_ENUM,
|
|
INPUT_SOURCE_ENUM,
|
|
XBASS_XOVER,
|
|
EQ_PRESET_ENUM,
|
|
SMART_VOLUME_ENUM,
|
|
MIC_BOOST_ENUM,
|
|
AE5_HEADPHONE_GAIN_ENUM,
|
|
AE5_SOUND_FILTER_ENUM,
|
|
ZXR_HEADPHONE_GAIN
|
|
#define EFFECTS_COUNT (EFFECT_END_NID - EFFECT_START_NID)
|
|
};
|
|
|
|
/* Effects values size*/
|
|
#define EFFECT_VALS_MAX_COUNT 12
|
|
|
|
/*
|
|
* Default values for the effect slider controls, they are in order of their
|
|
* effect NID's. Surround, Crystalizer, Dialog Plus, Smart Volume, and then
|
|
* X-bass.
|
|
*/
|
|
static const unsigned int effect_slider_defaults[] = {67, 65, 50, 74, 50};
|
|
/* Amount of effect level sliders for ca0132_alt controls. */
|
|
#define EFFECT_LEVEL_SLIDERS 5
|
|
|
|
/* Latency introduced by DSP blocks in milliseconds. */
|
|
#define DSP_CAPTURE_INIT_LATENCY 0
|
|
#define DSP_CRYSTAL_VOICE_LATENCY 124
|
|
#define DSP_PLAYBACK_INIT_LATENCY 13
|
|
#define DSP_PLAY_ENHANCEMENT_LATENCY 30
|
|
#define DSP_SPEAKER_OUT_LATENCY 7
|
|
|
|
struct ct_effect {
|
|
char name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
|
|
hda_nid_t nid;
|
|
int mid; /*effect module ID*/
|
|
int reqs[EFFECT_VALS_MAX_COUNT]; /*effect module request*/
|
|
int direct; /* 0:output; 1:input*/
|
|
int params; /* number of default non-on/off params */
|
|
/*effect default values, 1st is on/off. */
|
|
unsigned int def_vals[EFFECT_VALS_MAX_COUNT];
|
|
};
|
|
|
|
#define EFX_DIR_OUT 0
|
|
#define EFX_DIR_IN 1
|
|
|
|
static const struct ct_effect ca0132_effects[EFFECTS_COUNT] = {
|
|
{ .name = "Surround",
|
|
.nid = SURROUND,
|
|
.mid = 0x96,
|
|
.reqs = {0, 1},
|
|
.direct = EFX_DIR_OUT,
|
|
.params = 1,
|
|
.def_vals = {0x3F800000, 0x3F2B851F}
|
|
},
|
|
{ .name = "Crystalizer",
|
|
.nid = CRYSTALIZER,
|
|
.mid = 0x96,
|
|
.reqs = {7, 8},
|
|
.direct = EFX_DIR_OUT,
|
|
.params = 1,
|
|
.def_vals = {0x3F800000, 0x3F266666}
|
|
},
|
|
{ .name = "Dialog Plus",
|
|
.nid = DIALOG_PLUS,
|
|
.mid = 0x96,
|
|
.reqs = {2, 3},
|
|
.direct = EFX_DIR_OUT,
|
|
.params = 1,
|
|
.def_vals = {0x00000000, 0x3F000000}
|
|
},
|
|
{ .name = "Smart Volume",
|
|
.nid = SMART_VOLUME,
|
|
.mid = 0x96,
|
|
.reqs = {4, 5, 6},
|
|
.direct = EFX_DIR_OUT,
|
|
.params = 2,
|
|
.def_vals = {0x3F800000, 0x3F3D70A4, 0x00000000}
|
|
},
|
|
{ .name = "X-Bass",
|
|
.nid = X_BASS,
|
|
.mid = 0x96,
|
|
.reqs = {24, 23, 25},
|
|
.direct = EFX_DIR_OUT,
|
|
.params = 2,
|
|
.def_vals = {0x3F800000, 0x42A00000, 0x3F000000}
|
|
},
|
|
{ .name = "Equalizer",
|
|
.nid = EQUALIZER,
|
|
.mid = 0x96,
|
|
.reqs = {9, 10, 11, 12, 13, 14,
|
|
15, 16, 17, 18, 19, 20},
|
|
.direct = EFX_DIR_OUT,
|
|
.params = 11,
|
|
.def_vals = {0x00000000, 0x00000000, 0x00000000, 0x00000000,
|
|
0x00000000, 0x00000000, 0x00000000, 0x00000000,
|
|
0x00000000, 0x00000000, 0x00000000, 0x00000000}
|
|
},
|
|
{ .name = "Echo Cancellation",
|
|
.nid = ECHO_CANCELLATION,
|
|
.mid = 0x95,
|
|
.reqs = {0, 1, 2, 3},
|
|
.direct = EFX_DIR_IN,
|
|
.params = 3,
|
|
.def_vals = {0x00000000, 0x3F3A9692, 0x00000000, 0x00000000}
|
|
},
|
|
{ .name = "Voice Focus",
|
|
.nid = VOICE_FOCUS,
|
|
.mid = 0x95,
|
|
.reqs = {6, 7, 8, 9},
|
|
.direct = EFX_DIR_IN,
|
|
.params = 3,
|
|
.def_vals = {0x3F800000, 0x3D7DF3B6, 0x41F00000, 0x41F00000}
|
|
},
|
|
{ .name = "Mic SVM",
|
|
.nid = MIC_SVM,
|
|
.mid = 0x95,
|
|
.reqs = {44, 45},
|
|
.direct = EFX_DIR_IN,
|
|
.params = 1,
|
|
.def_vals = {0x00000000, 0x3F3D70A4}
|
|
},
|
|
{ .name = "Noise Reduction",
|
|
.nid = NOISE_REDUCTION,
|
|
.mid = 0x95,
|
|
.reqs = {4, 5},
|
|
.direct = EFX_DIR_IN,
|
|
.params = 1,
|
|
.def_vals = {0x3F800000, 0x3F000000}
|
|
},
|
|
{ .name = "VoiceFX",
|
|
.nid = VOICEFX,
|
|
.mid = 0x95,
|
|
.reqs = {10, 11, 12, 13, 14, 15, 16, 17, 18},
|
|
.direct = EFX_DIR_IN,
|
|
.params = 8,
|
|
.def_vals = {0x00000000, 0x43C80000, 0x44AF0000, 0x44FA0000,
|
|
0x3F800000, 0x3F800000, 0x3F800000, 0x00000000,
|
|
0x00000000}
|
|
}
|
|
};
|
|
|
|
/* Tuning controls */
|
|
#ifdef ENABLE_TUNING_CONTROLS
|
|
|
|
enum {
|
|
#define TUNING_CTL_START_NID 0xC0
|
|
WEDGE_ANGLE = TUNING_CTL_START_NID,
|
|
SVM_LEVEL,
|
|
EQUALIZER_BAND_0,
|
|
EQUALIZER_BAND_1,
|
|
EQUALIZER_BAND_2,
|
|
EQUALIZER_BAND_3,
|
|
EQUALIZER_BAND_4,
|
|
EQUALIZER_BAND_5,
|
|
EQUALIZER_BAND_6,
|
|
EQUALIZER_BAND_7,
|
|
EQUALIZER_BAND_8,
|
|
EQUALIZER_BAND_9,
|
|
TUNING_CTL_END_NID
|
|
#define TUNING_CTLS_COUNT (TUNING_CTL_END_NID - TUNING_CTL_START_NID)
|
|
};
|
|
|
|
struct ct_tuning_ctl {
|
|
char name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
|
|
hda_nid_t parent_nid;
|
|
hda_nid_t nid;
|
|
int mid; /*effect module ID*/
|
|
int req; /*effect module request*/
|
|
int direct; /* 0:output; 1:input*/
|
|
unsigned int def_val;/*effect default values*/
|
|
};
|
|
|
|
static const struct ct_tuning_ctl ca0132_tuning_ctls[] = {
|
|
{ .name = "Wedge Angle",
|
|
.parent_nid = VOICE_FOCUS,
|
|
.nid = WEDGE_ANGLE,
|
|
.mid = 0x95,
|
|
.req = 8,
|
|
.direct = EFX_DIR_IN,
|
|
.def_val = 0x41F00000
|
|
},
|
|
{ .name = "SVM Level",
|
|
.parent_nid = MIC_SVM,
|
|
.nid = SVM_LEVEL,
|
|
.mid = 0x95,
|
|
.req = 45,
|
|
.direct = EFX_DIR_IN,
|
|
.def_val = 0x3F3D70A4
|
|
},
|
|
{ .name = "EQ Band0",
|
|
.parent_nid = EQUALIZER,
|
|
.nid = EQUALIZER_BAND_0,
|
|
.mid = 0x96,
|
|
.req = 11,
|
|
.direct = EFX_DIR_OUT,
|
|
.def_val = 0x00000000
|
|
},
|
|
{ .name = "EQ Band1",
|
|
.parent_nid = EQUALIZER,
|
|
.nid = EQUALIZER_BAND_1,
|
|
.mid = 0x96,
|
|
.req = 12,
|
|
.direct = EFX_DIR_OUT,
|
|
.def_val = 0x00000000
|
|
},
|
|
{ .name = "EQ Band2",
|
|
.parent_nid = EQUALIZER,
|
|
.nid = EQUALIZER_BAND_2,
|
|
.mid = 0x96,
|
|
.req = 13,
|
|
.direct = EFX_DIR_OUT,
|
|
.def_val = 0x00000000
|
|
},
|
|
{ .name = "EQ Band3",
|
|
.parent_nid = EQUALIZER,
|
|
.nid = EQUALIZER_BAND_3,
|
|
.mid = 0x96,
|
|
.req = 14,
|
|
.direct = EFX_DIR_OUT,
|
|
.def_val = 0x00000000
|
|
},
|
|
{ .name = "EQ Band4",
|
|
.parent_nid = EQUALIZER,
|
|
.nid = EQUALIZER_BAND_4,
|
|
.mid = 0x96,
|
|
.req = 15,
|
|
.direct = EFX_DIR_OUT,
|
|
.def_val = 0x00000000
|
|
},
|
|
{ .name = "EQ Band5",
|
|
.parent_nid = EQUALIZER,
|
|
.nid = EQUALIZER_BAND_5,
|
|
.mid = 0x96,
|
|
.req = 16,
|
|
.direct = EFX_DIR_OUT,
|
|
.def_val = 0x00000000
|
|
},
|
|
{ .name = "EQ Band6",
|
|
.parent_nid = EQUALIZER,
|
|
.nid = EQUALIZER_BAND_6,
|
|
.mid = 0x96,
|
|
.req = 17,
|
|
.direct = EFX_DIR_OUT,
|
|
.def_val = 0x00000000
|
|
},
|
|
{ .name = "EQ Band7",
|
|
.parent_nid = EQUALIZER,
|
|
.nid = EQUALIZER_BAND_7,
|
|
.mid = 0x96,
|
|
.req = 18,
|
|
.direct = EFX_DIR_OUT,
|
|
.def_val = 0x00000000
|
|
},
|
|
{ .name = "EQ Band8",
|
|
.parent_nid = EQUALIZER,
|
|
.nid = EQUALIZER_BAND_8,
|
|
.mid = 0x96,
|
|
.req = 19,
|
|
.direct = EFX_DIR_OUT,
|
|
.def_val = 0x00000000
|
|
},
|
|
{ .name = "EQ Band9",
|
|
.parent_nid = EQUALIZER,
|
|
.nid = EQUALIZER_BAND_9,
|
|
.mid = 0x96,
|
|
.req = 20,
|
|
.direct = EFX_DIR_OUT,
|
|
.def_val = 0x00000000
|
|
}
|
|
};
|
|
#endif
|
|
|
|
/* Voice FX Presets */
|
|
#define VOICEFX_MAX_PARAM_COUNT 9
|
|
|
|
struct ct_voicefx {
|
|
char *name;
|
|
hda_nid_t nid;
|
|
int mid;
|
|
int reqs[VOICEFX_MAX_PARAM_COUNT]; /*effect module request*/
|
|
};
|
|
|
|
struct ct_voicefx_preset {
|
|
char *name; /*preset name*/
|
|
unsigned int vals[VOICEFX_MAX_PARAM_COUNT];
|
|
};
|
|
|
|
static const struct ct_voicefx ca0132_voicefx = {
|
|
.name = "VoiceFX Capture Switch",
|
|
.nid = VOICEFX,
|
|
.mid = 0x95,
|
|
.reqs = {10, 11, 12, 13, 14, 15, 16, 17, 18}
|
|
};
|
|
|
|
static const struct ct_voicefx_preset ca0132_voicefx_presets[] = {
|
|
{ .name = "Neutral",
|
|
.vals = { 0x00000000, 0x43C80000, 0x44AF0000,
|
|
0x44FA0000, 0x3F800000, 0x3F800000,
|
|
0x3F800000, 0x00000000, 0x00000000 }
|
|
},
|
|
{ .name = "Female2Male",
|
|
.vals = { 0x3F800000, 0x43C80000, 0x44AF0000,
|
|
0x44FA0000, 0x3F19999A, 0x3F866666,
|
|
0x3F800000, 0x00000000, 0x00000000 }
|
|
},
|
|
{ .name = "Male2Female",
|
|
.vals = { 0x3F800000, 0x43C80000, 0x44AF0000,
|
|
0x450AC000, 0x4017AE14, 0x3F6B851F,
|
|
0x3F800000, 0x00000000, 0x00000000 }
|
|
},
|
|
{ .name = "ScrappyKid",
|
|
.vals = { 0x3F800000, 0x43C80000, 0x44AF0000,
|
|
0x44FA0000, 0x40400000, 0x3F28F5C3,
|
|
0x3F800000, 0x00000000, 0x00000000 }
|
|
},
|
|
{ .name = "Elderly",
|
|
.vals = { 0x3F800000, 0x44324000, 0x44BB8000,
|
|
0x44E10000, 0x3FB33333, 0x3FB9999A,
|
|
0x3F800000, 0x3E3A2E43, 0x00000000 }
|
|
},
|
|
{ .name = "Orc",
|
|
.vals = { 0x3F800000, 0x43EA0000, 0x44A52000,
|
|
0x45098000, 0x3F266666, 0x3FC00000,
|
|
0x3F800000, 0x00000000, 0x00000000 }
|
|
},
|
|
{ .name = "Elf",
|
|
.vals = { 0x3F800000, 0x43C70000, 0x44AE6000,
|
|
0x45193000, 0x3F8E147B, 0x3F75C28F,
|
|
0x3F800000, 0x00000000, 0x00000000 }
|
|
},
|
|
{ .name = "Dwarf",
|
|
.vals = { 0x3F800000, 0x43930000, 0x44BEE000,
|
|
0x45007000, 0x3F451EB8, 0x3F7851EC,
|
|
0x3F800000, 0x00000000, 0x00000000 }
|
|
},
|
|
{ .name = "AlienBrute",
|
|
.vals = { 0x3F800000, 0x43BFC5AC, 0x44B28FDF,
|
|
0x451F6000, 0x3F266666, 0x3FA7D945,
|
|
0x3F800000, 0x3CF5C28F, 0x00000000 }
|
|
},
|
|
{ .name = "Robot",
|
|
.vals = { 0x3F800000, 0x43C80000, 0x44AF0000,
|
|
0x44FA0000, 0x3FB2718B, 0x3F800000,
|
|
0xBC07010E, 0x00000000, 0x00000000 }
|
|
},
|
|
{ .name = "Marine",
|
|
.vals = { 0x3F800000, 0x43C20000, 0x44906000,
|
|
0x44E70000, 0x3F4CCCCD, 0x3F8A3D71,
|
|
0x3F0A3D71, 0x00000000, 0x00000000 }
|
|
},
|
|
{ .name = "Emo",
|
|
.vals = { 0x3F800000, 0x43C80000, 0x44AF0000,
|
|
0x44FA0000, 0x3F800000, 0x3F800000,
|
|
0x3E4CCCCD, 0x00000000, 0x00000000 }
|
|
},
|
|
{ .name = "DeepVoice",
|
|
.vals = { 0x3F800000, 0x43A9C5AC, 0x44AA4FDF,
|
|
0x44FFC000, 0x3EDBB56F, 0x3F99C4CA,
|
|
0x3F800000, 0x00000000, 0x00000000 }
|
|
},
|
|
{ .name = "Munchkin",
|
|
.vals = { 0x3F800000, 0x43C80000, 0x44AF0000,
|
|
0x44FA0000, 0x3F800000, 0x3F1A043C,
|
|
0x3F800000, 0x00000000, 0x00000000 }
|
|
}
|
|
};
|
|
|
|
/* ca0132 EQ presets, taken from Windows Sound Blaster Z Driver */
|
|
|
|
#define EQ_PRESET_MAX_PARAM_COUNT 11
|
|
|
|
struct ct_eq {
|
|
char *name;
|
|
hda_nid_t nid;
|
|
int mid;
|
|
int reqs[EQ_PRESET_MAX_PARAM_COUNT]; /*effect module request*/
|
|
};
|
|
|
|
struct ct_eq_preset {
|
|
char *name; /*preset name*/
|
|
unsigned int vals[EQ_PRESET_MAX_PARAM_COUNT];
|
|
};
|
|
|
|
static const struct ct_eq ca0132_alt_eq_enum = {
|
|
.name = "FX: Equalizer Preset Switch",
|
|
.nid = EQ_PRESET_ENUM,
|
|
.mid = 0x96,
|
|
.reqs = {10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20}
|
|
};
|
|
|
|
|
|
static const struct ct_eq_preset ca0132_alt_eq_presets[] = {
|
|
{ .name = "Flat",
|
|
.vals = { 0x00000000, 0x00000000, 0x00000000,
|
|
0x00000000, 0x00000000, 0x00000000,
|
|
0x00000000, 0x00000000, 0x00000000,
|
|
0x00000000, 0x00000000 }
|
|
},
|
|
{ .name = "Acoustic",
|
|
.vals = { 0x00000000, 0x00000000, 0x3F8CCCCD,
|
|
0x40000000, 0x00000000, 0x00000000,
|
|
0x00000000, 0x00000000, 0x40000000,
|
|
0x40000000, 0x40000000 }
|
|
},
|
|
{ .name = "Classical",
|
|
.vals = { 0x00000000, 0x00000000, 0x40C00000,
|
|
0x40C00000, 0x40466666, 0x00000000,
|
|
0x00000000, 0x00000000, 0x00000000,
|
|
0x40466666, 0x40466666 }
|
|
},
|
|
{ .name = "Country",
|
|
.vals = { 0x00000000, 0xBF99999A, 0x00000000,
|
|
0x3FA66666, 0x3FA66666, 0x3F8CCCCD,
|
|
0x00000000, 0x00000000, 0x40000000,
|
|
0x40466666, 0x40800000 }
|
|
},
|
|
{ .name = "Dance",
|
|
.vals = { 0x00000000, 0xBF99999A, 0x40000000,
|
|
0x40466666, 0x40866666, 0xBF99999A,
|
|
0xBF99999A, 0x00000000, 0x00000000,
|
|
0x40800000, 0x40800000 }
|
|
},
|
|
{ .name = "Jazz",
|
|
.vals = { 0x00000000, 0x00000000, 0x00000000,
|
|
0x3F8CCCCD, 0x40800000, 0x40800000,
|
|
0x40800000, 0x00000000, 0x3F8CCCCD,
|
|
0x40466666, 0x40466666 }
|
|
},
|
|
{ .name = "New Age",
|
|
.vals = { 0x00000000, 0x00000000, 0x40000000,
|
|
0x40000000, 0x00000000, 0x00000000,
|
|
0x00000000, 0x3F8CCCCD, 0x40000000,
|
|
0x40000000, 0x40000000 }
|
|
},
|
|
{ .name = "Pop",
|
|
.vals = { 0x00000000, 0xBFCCCCCD, 0x00000000,
|
|
0x40000000, 0x40000000, 0x00000000,
|
|
0xBF99999A, 0xBF99999A, 0x00000000,
|
|
0x40466666, 0x40C00000 }
|
|
},
|
|
{ .name = "Rock",
|
|
.vals = { 0x00000000, 0xBF99999A, 0xBF99999A,
|
|
0x3F8CCCCD, 0x40000000, 0xBF99999A,
|
|
0xBF99999A, 0x00000000, 0x00000000,
|
|
0x40800000, 0x40800000 }
|
|
},
|
|
{ .name = "Vocal",
|
|
.vals = { 0x00000000, 0xC0000000, 0xBF99999A,
|
|
0xBF99999A, 0x00000000, 0x40466666,
|
|
0x40800000, 0x40466666, 0x00000000,
|
|
0x00000000, 0x3F8CCCCD }
|
|
}
|
|
};
|
|
|
|
/* DSP command sequences for ca0132_alt_select_out */
|
|
#define ALT_OUT_SET_MAX_COMMANDS 9 /* Max number of commands in sequence */
|
|
struct ca0132_alt_out_set {
|
|
char *name; /*preset name*/
|
|
unsigned char commands;
|
|
unsigned int mids[ALT_OUT_SET_MAX_COMMANDS];
|
|
unsigned int reqs[ALT_OUT_SET_MAX_COMMANDS];
|
|
unsigned int vals[ALT_OUT_SET_MAX_COMMANDS];
|
|
};
|
|
|
|
static const struct ca0132_alt_out_set alt_out_presets[] = {
|
|
{ .name = "Line Out",
|
|
.commands = 7,
|
|
.mids = { 0x96, 0x96, 0x96, 0x8F,
|
|
0x96, 0x96, 0x96 },
|
|
.reqs = { 0x19, 0x17, 0x18, 0x01,
|
|
0x1F, 0x15, 0x3A },
|
|
.vals = { 0x3F000000, 0x42A00000, 0x00000000,
|
|
0x00000000, 0x00000000, 0x00000000,
|
|
0x00000000 }
|
|
},
|
|
{ .name = "Headphone",
|
|
.commands = 7,
|
|
.mids = { 0x96, 0x96, 0x96, 0x8F,
|
|
0x96, 0x96, 0x96 },
|
|
.reqs = { 0x19, 0x17, 0x18, 0x01,
|
|
0x1F, 0x15, 0x3A },
|
|
.vals = { 0x3F000000, 0x42A00000, 0x00000000,
|
|
0x00000000, 0x00000000, 0x00000000,
|
|
0x00000000 }
|
|
},
|
|
{ .name = "Surround",
|
|
.commands = 8,
|
|
.mids = { 0x96, 0x8F, 0x96, 0x96,
|
|
0x96, 0x96, 0x96, 0x96 },
|
|
.reqs = { 0x18, 0x01, 0x1F, 0x15,
|
|
0x3A, 0x1A, 0x1B, 0x1C },
|
|
.vals = { 0x00000000, 0x00000000, 0x00000000,
|
|
0x00000000, 0x00000000, 0x00000000,
|
|
0x00000000, 0x00000000 }
|
|
}
|
|
};
|
|
|
|
/*
|
|
* DSP volume setting structs. Req 1 is left volume, req 2 is right volume,
|
|
* and I don't know what the third req is, but it's always zero. I assume it's
|
|
* some sort of update or set command to tell the DSP there's new volume info.
|
|
*/
|
|
#define DSP_VOL_OUT 0
|
|
#define DSP_VOL_IN 1
|
|
|
|
struct ct_dsp_volume_ctl {
|
|
hda_nid_t vnid;
|
|
int mid; /* module ID*/
|
|
unsigned int reqs[3]; /* scp req ID */
|
|
};
|
|
|
|
static const struct ct_dsp_volume_ctl ca0132_alt_vol_ctls[] = {
|
|
{ .vnid = VNID_SPK,
|
|
.mid = 0x32,
|
|
.reqs = {3, 4, 2}
|
|
},
|
|
{ .vnid = VNID_MIC,
|
|
.mid = 0x37,
|
|
.reqs = {2, 3, 1}
|
|
}
|
|
};
|
|
|
|
/* Values for ca0113_mmio_command_set for selecting output. */
|
|
#define AE5_CA0113_OUT_SET_COMMANDS 6
|
|
struct ae5_ca0113_output_set {
|
|
unsigned int group[AE5_CA0113_OUT_SET_COMMANDS];
|
|
unsigned int target[AE5_CA0113_OUT_SET_COMMANDS];
|
|
unsigned int vals[AE5_CA0113_OUT_SET_COMMANDS];
|
|
};
|
|
|
|
static const struct ae5_ca0113_output_set ae5_ca0113_output_presets[] = {
|
|
{ .group = { 0x30, 0x30, 0x48, 0x48, 0x48, 0x30 },
|
|
.target = { 0x2e, 0x30, 0x0d, 0x17, 0x19, 0x32 },
|
|
.vals = { 0x00, 0x00, 0x40, 0x00, 0x00, 0x3f }
|
|
},
|
|
{ .group = { 0x30, 0x30, 0x48, 0x48, 0x48, 0x30 },
|
|
.target = { 0x2e, 0x30, 0x0d, 0x17, 0x19, 0x32 },
|
|
.vals = { 0x3f, 0x3f, 0x00, 0x00, 0x00, 0x00 }
|
|
},
|
|
{ .group = { 0x30, 0x30, 0x48, 0x48, 0x48, 0x30 },
|
|
.target = { 0x2e, 0x30, 0x0d, 0x17, 0x19, 0x32 },
|
|
.vals = { 0x00, 0x00, 0x40, 0x00, 0x00, 0x3f }
|
|
}
|
|
};
|
|
|
|
/* ae5 ca0113 command sequences to set headphone gain levels. */
|
|
#define AE5_HEADPHONE_GAIN_PRESET_MAX_COMMANDS 4
|
|
struct ae5_headphone_gain_set {
|
|
char *name;
|
|
unsigned int vals[AE5_HEADPHONE_GAIN_PRESET_MAX_COMMANDS];
|
|
};
|
|
|
|
static const struct ae5_headphone_gain_set ae5_headphone_gain_presets[] = {
|
|
{ .name = "Low (16-31",
|
|
.vals = { 0xff, 0x2c, 0xf5, 0x32 }
|
|
},
|
|
{ .name = "Medium (32-149",
|
|
.vals = { 0x38, 0xa8, 0x3e, 0x4c }
|
|
},
|
|
{ .name = "High (150-600",
|
|
.vals = { 0xff, 0xff, 0xff, 0x7f }
|
|
}
|
|
};
|
|
|
|
struct ae5_filter_set {
|
|
char *name;
|
|
unsigned int val;
|
|
};
|
|
|
|
static const struct ae5_filter_set ae5_filter_presets[] = {
|
|
{ .name = "Slow Roll Off",
|
|
.val = 0xa0
|
|
},
|
|
{ .name = "Minimum Phase",
|
|
.val = 0xc0
|
|
},
|
|
{ .name = "Fast Roll Off",
|
|
.val = 0x80
|
|
}
|
|
};
|
|
|
|
enum hda_cmd_vendor_io {
|
|
/* for DspIO node */
|
|
VENDOR_DSPIO_SCP_WRITE_DATA_LOW = 0x000,
|
|
VENDOR_DSPIO_SCP_WRITE_DATA_HIGH = 0x100,
|
|
|
|
VENDOR_DSPIO_STATUS = 0xF01,
|
|
VENDOR_DSPIO_SCP_POST_READ_DATA = 0x702,
|
|
VENDOR_DSPIO_SCP_READ_DATA = 0xF02,
|
|
VENDOR_DSPIO_DSP_INIT = 0x703,
|
|
VENDOR_DSPIO_SCP_POST_COUNT_QUERY = 0x704,
|
|
VENDOR_DSPIO_SCP_READ_COUNT = 0xF04,
|
|
|
|
/* for ChipIO node */
|
|
VENDOR_CHIPIO_ADDRESS_LOW = 0x000,
|
|
VENDOR_CHIPIO_ADDRESS_HIGH = 0x100,
|
|
VENDOR_CHIPIO_STREAM_FORMAT = 0x200,
|
|
VENDOR_CHIPIO_DATA_LOW = 0x300,
|
|
VENDOR_CHIPIO_DATA_HIGH = 0x400,
|
|
|
|
VENDOR_CHIPIO_8051_WRITE_DIRECT = 0x500,
|
|
VENDOR_CHIPIO_8051_READ_DIRECT = 0xD00,
|
|
|
|
VENDOR_CHIPIO_GET_PARAMETER = 0xF00,
|
|
VENDOR_CHIPIO_STATUS = 0xF01,
|
|
VENDOR_CHIPIO_HIC_POST_READ = 0x702,
|
|
VENDOR_CHIPIO_HIC_READ_DATA = 0xF03,
|
|
|
|
VENDOR_CHIPIO_8051_DATA_WRITE = 0x707,
|
|
VENDOR_CHIPIO_8051_DATA_READ = 0xF07,
|
|
VENDOR_CHIPIO_8051_PMEM_READ = 0xF08,
|
|
VENDOR_CHIPIO_8051_IRAM_WRITE = 0x709,
|
|
VENDOR_CHIPIO_8051_IRAM_READ = 0xF09,
|
|
|
|
VENDOR_CHIPIO_CT_EXTENSIONS_ENABLE = 0x70A,
|
|
VENDOR_CHIPIO_CT_EXTENSIONS_GET = 0xF0A,
|
|
|
|
VENDOR_CHIPIO_PLL_PMU_WRITE = 0x70C,
|
|
VENDOR_CHIPIO_PLL_PMU_READ = 0xF0C,
|
|
VENDOR_CHIPIO_8051_ADDRESS_LOW = 0x70D,
|
|
VENDOR_CHIPIO_8051_ADDRESS_HIGH = 0x70E,
|
|
VENDOR_CHIPIO_FLAG_SET = 0x70F,
|
|
VENDOR_CHIPIO_FLAGS_GET = 0xF0F,
|
|
VENDOR_CHIPIO_PARAM_SET = 0x710,
|
|
VENDOR_CHIPIO_PARAM_GET = 0xF10,
|
|
|
|
VENDOR_CHIPIO_PORT_ALLOC_CONFIG_SET = 0x711,
|
|
VENDOR_CHIPIO_PORT_ALLOC_SET = 0x712,
|
|
VENDOR_CHIPIO_PORT_ALLOC_GET = 0xF12,
|
|
VENDOR_CHIPIO_PORT_FREE_SET = 0x713,
|
|
|
|
VENDOR_CHIPIO_PARAM_EX_ID_GET = 0xF17,
|
|
VENDOR_CHIPIO_PARAM_EX_ID_SET = 0x717,
|
|
VENDOR_CHIPIO_PARAM_EX_VALUE_GET = 0xF18,
|
|
VENDOR_CHIPIO_PARAM_EX_VALUE_SET = 0x718,
|
|
|
|
VENDOR_CHIPIO_DMIC_CTL_SET = 0x788,
|
|
VENDOR_CHIPIO_DMIC_CTL_GET = 0xF88,
|
|
VENDOR_CHIPIO_DMIC_PIN_SET = 0x789,
|
|
VENDOR_CHIPIO_DMIC_PIN_GET = 0xF89,
|
|
VENDOR_CHIPIO_DMIC_MCLK_SET = 0x78A,
|
|
VENDOR_CHIPIO_DMIC_MCLK_GET = 0xF8A,
|
|
|
|
VENDOR_CHIPIO_EAPD_SEL_SET = 0x78D
|
|
};
|
|
|
|
/*
|
|
* Control flag IDs
|
|
*/
|
|
enum control_flag_id {
|
|
/* Connection manager stream setup is bypassed/enabled */
|
|
CONTROL_FLAG_C_MGR = 0,
|
|
/* DSP DMA is bypassed/enabled */
|
|
CONTROL_FLAG_DMA = 1,
|
|
/* 8051 'idle' mode is disabled/enabled */
|
|
CONTROL_FLAG_IDLE_ENABLE = 2,
|
|
/* Tracker for the SPDIF-in path is bypassed/enabled */
|
|
CONTROL_FLAG_TRACKER = 3,
|
|
/* DigitalOut to Spdif2Out connection is disabled/enabled */
|
|
CONTROL_FLAG_SPDIF2OUT = 4,
|
|
/* Digital Microphone is disabled/enabled */
|
|
CONTROL_FLAG_DMIC = 5,
|
|
/* ADC_B rate is 48 kHz/96 kHz */
|
|
CONTROL_FLAG_ADC_B_96KHZ = 6,
|
|
/* ADC_C rate is 48 kHz/96 kHz */
|
|
CONTROL_FLAG_ADC_C_96KHZ = 7,
|
|
/* DAC rate is 48 kHz/96 kHz (affects all DACs) */
|
|
CONTROL_FLAG_DAC_96KHZ = 8,
|
|
/* DSP rate is 48 kHz/96 kHz */
|
|
CONTROL_FLAG_DSP_96KHZ = 9,
|
|
/* SRC clock is 98 MHz/196 MHz (196 MHz forces rate to 96 KHz) */
|
|
CONTROL_FLAG_SRC_CLOCK_196MHZ = 10,
|
|
/* SRC rate is 48 kHz/96 kHz (48 kHz disabled when clock is 196 MHz) */
|
|
CONTROL_FLAG_SRC_RATE_96KHZ = 11,
|
|
/* Decode Loop (DSP->SRC->DSP) is disabled/enabled */
|
|
CONTROL_FLAG_DECODE_LOOP = 12,
|
|
/* De-emphasis filter on DAC-1 disabled/enabled */
|
|
CONTROL_FLAG_DAC1_DEEMPHASIS = 13,
|
|
/* De-emphasis filter on DAC-2 disabled/enabled */
|
|
CONTROL_FLAG_DAC2_DEEMPHASIS = 14,
|
|
/* De-emphasis filter on DAC-3 disabled/enabled */
|
|
CONTROL_FLAG_DAC3_DEEMPHASIS = 15,
|
|
/* High-pass filter on ADC_B disabled/enabled */
|
|
CONTROL_FLAG_ADC_B_HIGH_PASS = 16,
|
|
/* High-pass filter on ADC_C disabled/enabled */
|
|
CONTROL_FLAG_ADC_C_HIGH_PASS = 17,
|
|
/* Common mode on Port_A disabled/enabled */
|
|
CONTROL_FLAG_PORT_A_COMMON_MODE = 18,
|
|
/* Common mode on Port_D disabled/enabled */
|
|
CONTROL_FLAG_PORT_D_COMMON_MODE = 19,
|
|
/* Impedance for ramp generator on Port_A 16 Ohm/10K Ohm */
|
|
CONTROL_FLAG_PORT_A_10KOHM_LOAD = 20,
|
|
/* Impedance for ramp generator on Port_D, 16 Ohm/10K Ohm */
|
|
CONTROL_FLAG_PORT_D_10KOHM_LOAD = 21,
|
|
/* ASI rate is 48kHz/96kHz */
|
|
CONTROL_FLAG_ASI_96KHZ = 22,
|
|
/* DAC power settings able to control attached ports no/yes */
|
|
CONTROL_FLAG_DACS_CONTROL_PORTS = 23,
|
|
/* Clock Stop OK reporting is disabled/enabled */
|
|
CONTROL_FLAG_CONTROL_STOP_OK_ENABLE = 24,
|
|
/* Number of control flags */
|
|
CONTROL_FLAGS_MAX = (CONTROL_FLAG_CONTROL_STOP_OK_ENABLE+1)
|
|
};
|
|
|
|
/*
|
|
* Control parameter IDs
|
|
*/
|
|
enum control_param_id {
|
|
/* 0: None, 1: Mic1In*/
|
|
CONTROL_PARAM_VIP_SOURCE = 1,
|
|
/* 0: force HDA, 1: allow DSP if HDA Spdif1Out stream is idle */
|
|
CONTROL_PARAM_SPDIF1_SOURCE = 2,
|
|
/* Port A output stage gain setting to use when 16 Ohm output
|
|
* impedance is selected*/
|
|
CONTROL_PARAM_PORTA_160OHM_GAIN = 8,
|
|
/* Port D output stage gain setting to use when 16 Ohm output
|
|
* impedance is selected*/
|
|
CONTROL_PARAM_PORTD_160OHM_GAIN = 10,
|
|
|
|
/*
|
|
* This control param name was found in the 8051 memory, and makes
|
|
* sense given the fact the AE-5 uses it and has the ASI flag set.
|
|
*/
|
|
CONTROL_PARAM_ASI = 23,
|
|
|
|
/* Stream Control */
|
|
|
|
/* Select stream with the given ID */
|
|
CONTROL_PARAM_STREAM_ID = 24,
|
|
/* Source connection point for the selected stream */
|
|
CONTROL_PARAM_STREAM_SOURCE_CONN_POINT = 25,
|
|
/* Destination connection point for the selected stream */
|
|
CONTROL_PARAM_STREAM_DEST_CONN_POINT = 26,
|
|
/* Number of audio channels in the selected stream */
|
|
CONTROL_PARAM_STREAMS_CHANNELS = 27,
|
|
/*Enable control for the selected stream */
|
|
CONTROL_PARAM_STREAM_CONTROL = 28,
|
|
|
|
/* Connection Point Control */
|
|
|
|
/* Select connection point with the given ID */
|
|
CONTROL_PARAM_CONN_POINT_ID = 29,
|
|
/* Connection point sample rate */
|
|
CONTROL_PARAM_CONN_POINT_SAMPLE_RATE = 30,
|
|
|
|
/* Node Control */
|
|
|
|
/* Select HDA node with the given ID */
|
|
CONTROL_PARAM_NODE_ID = 31
|
|
};
|
|
|
|
/*
|
|
* Dsp Io Status codes
|
|
*/
|
|
enum hda_vendor_status_dspio {
|
|
/* Success */
|
|
VENDOR_STATUS_DSPIO_OK = 0x00,
|
|
/* Busy, unable to accept new command, the host must retry */
|
|
VENDOR_STATUS_DSPIO_BUSY = 0x01,
|
|
/* SCP command queue is full */
|
|
VENDOR_STATUS_DSPIO_SCP_COMMAND_QUEUE_FULL = 0x02,
|
|
/* SCP response queue is empty */
|
|
VENDOR_STATUS_DSPIO_SCP_RESPONSE_QUEUE_EMPTY = 0x03
|
|
};
|
|
|
|
/*
|
|
* Chip Io Status codes
|
|
*/
|
|
enum hda_vendor_status_chipio {
|
|
/* Success */
|
|
VENDOR_STATUS_CHIPIO_OK = 0x00,
|
|
/* Busy, unable to accept new command, the host must retry */
|
|
VENDOR_STATUS_CHIPIO_BUSY = 0x01
|
|
};
|
|
|
|
/*
|
|
* CA0132 sample rate
|
|
*/
|
|
enum ca0132_sample_rate {
|
|
SR_6_000 = 0x00,
|
|
SR_8_000 = 0x01,
|
|
SR_9_600 = 0x02,
|
|
SR_11_025 = 0x03,
|
|
SR_16_000 = 0x04,
|
|
SR_22_050 = 0x05,
|
|
SR_24_000 = 0x06,
|
|
SR_32_000 = 0x07,
|
|
SR_44_100 = 0x08,
|
|
SR_48_000 = 0x09,
|
|
SR_88_200 = 0x0A,
|
|
SR_96_000 = 0x0B,
|
|
SR_144_000 = 0x0C,
|
|
SR_176_400 = 0x0D,
|
|
SR_192_000 = 0x0E,
|
|
SR_384_000 = 0x0F,
|
|
|
|
SR_COUNT = 0x10,
|
|
|
|
SR_RATE_UNKNOWN = 0x1F
|
|
};
|
|
|
|
enum dsp_download_state {
|
|
DSP_DOWNLOAD_FAILED = -1,
|
|
DSP_DOWNLOAD_INIT = 0,
|
|
DSP_DOWNLOADING = 1,
|
|
DSP_DOWNLOADED = 2
|
|
};
|
|
|
|
/* retrieve parameters from hda format */
|
|
#define get_hdafmt_chs(fmt) (fmt & 0xf)
|
|
#define get_hdafmt_bits(fmt) ((fmt >> 4) & 0x7)
|
|
#define get_hdafmt_rate(fmt) ((fmt >> 8) & 0x7f)
|
|
#define get_hdafmt_type(fmt) ((fmt >> 15) & 0x1)
|
|
|
|
/*
|
|
* CA0132 specific
|
|
*/
|
|
|
|
struct ca0132_spec {
|
|
const struct snd_kcontrol_new *mixers[5];
|
|
unsigned int num_mixers;
|
|
const struct hda_verb *base_init_verbs;
|
|
const struct hda_verb *base_exit_verbs;
|
|
const struct hda_verb *chip_init_verbs;
|
|
const struct hda_verb *desktop_init_verbs;
|
|
struct hda_verb *spec_init_verbs;
|
|
struct auto_pin_cfg autocfg;
|
|
|
|
/* Nodes configurations */
|
|
struct hda_multi_out multiout;
|
|
hda_nid_t out_pins[AUTO_CFG_MAX_OUTS];
|
|
hda_nid_t dacs[AUTO_CFG_MAX_OUTS];
|
|
unsigned int num_outputs;
|
|
hda_nid_t input_pins[AUTO_PIN_LAST];
|
|
hda_nid_t adcs[AUTO_PIN_LAST];
|
|
hda_nid_t dig_out;
|
|
hda_nid_t dig_in;
|
|
unsigned int num_inputs;
|
|
hda_nid_t shared_mic_nid;
|
|
hda_nid_t shared_out_nid;
|
|
hda_nid_t unsol_tag_hp;
|
|
hda_nid_t unsol_tag_front_hp; /* for desktop ca0132 codecs */
|
|
hda_nid_t unsol_tag_amic1;
|
|
|
|
/* chip access */
|
|
struct mutex chipio_mutex; /* chip access mutex */
|
|
u32 curr_chip_addx;
|
|
|
|
/* DSP download related */
|
|
enum dsp_download_state dsp_state;
|
|
unsigned int dsp_stream_id;
|
|
unsigned int wait_scp;
|
|
unsigned int wait_scp_header;
|
|
unsigned int wait_num_data;
|
|
unsigned int scp_resp_header;
|
|
unsigned int scp_resp_data[4];
|
|
unsigned int scp_resp_count;
|
|
bool startup_check_entered;
|
|
bool dsp_reload;
|
|
|
|
/* mixer and effects related */
|
|
unsigned char dmic_ctl;
|
|
int cur_out_type;
|
|
int cur_mic_type;
|
|
long vnode_lvol[VNODES_COUNT];
|
|
long vnode_rvol[VNODES_COUNT];
|
|
long vnode_lswitch[VNODES_COUNT];
|
|
long vnode_rswitch[VNODES_COUNT];
|
|
long effects_switch[EFFECTS_COUNT];
|
|
long voicefx_val;
|
|
long cur_mic_boost;
|
|
/* ca0132_alt control related values */
|
|
unsigned char in_enum_val;
|
|
unsigned char out_enum_val;
|
|
unsigned char mic_boost_enum_val;
|
|
unsigned char smart_volume_setting;
|
|
long fx_ctl_val[EFFECT_LEVEL_SLIDERS];
|
|
long xbass_xover_freq;
|
|
long eq_preset_val;
|
|
unsigned int tlv[4];
|
|
struct hda_vmaster_mute_hook vmaster_mute;
|
|
/* AE-5 Control values */
|
|
unsigned char ae5_headphone_gain_val;
|
|
unsigned char ae5_filter_val;
|
|
/* ZxR Control Values */
|
|
unsigned char zxr_gain_set;
|
|
|
|
struct hda_codec *codec;
|
|
struct delayed_work unsol_hp_work;
|
|
int quirk;
|
|
|
|
#ifdef ENABLE_TUNING_CONTROLS
|
|
long cur_ctl_vals[TUNING_CTLS_COUNT];
|
|
#endif
|
|
/*
|
|
* The Recon3D, Sound Blaster Z, Sound Blaster ZxR, and Sound Blaster
|
|
* AE-5 all use PCI region 2 to toggle GPIO and other currently unknown
|
|
* things.
|
|
*/
|
|
bool use_pci_mmio;
|
|
void __iomem *mem_base;
|
|
|
|
/*
|
|
* Whether or not to use the alt functions like alt_select_out,
|
|
* alt_select_in, etc. Only used on desktop codecs for now, because of
|
|
* surround sound support.
|
|
*/
|
|
bool use_alt_functions;
|
|
|
|
/*
|
|
* Whether or not to use alt controls: volume effect sliders, EQ
|
|
* presets, smart volume presets, and new control names with FX prefix.
|
|
* Renames PlayEnhancement and CrystalVoice too.
|
|
*/
|
|
bool use_alt_controls;
|
|
};
|
|
|
|
/*
|
|
* CA0132 quirks table
|
|
*/
|
|
enum {
|
|
QUIRK_NONE,
|
|
QUIRK_ALIENWARE,
|
|
QUIRK_ALIENWARE_M17XR4,
|
|
QUIRK_SBZ,
|
|
QUIRK_ZXR,
|
|
QUIRK_ZXR_DBPRO,
|
|
QUIRK_R3DI,
|
|
QUIRK_R3D,
|
|
QUIRK_AE5,
|
|
QUIRK_AE7,
|
|
};
|
|
|
|
#ifdef CONFIG_PCI
|
|
#define ca0132_quirk(spec) ((spec)->quirk)
|
|
#define ca0132_use_pci_mmio(spec) ((spec)->use_pci_mmio)
|
|
#define ca0132_use_alt_functions(spec) ((spec)->use_alt_functions)
|
|
#define ca0132_use_alt_controls(spec) ((spec)->use_alt_controls)
|
|
#else
|
|
#define ca0132_quirk(spec) ({ (void)(spec); QUIRK_NONE; })
|
|
#define ca0132_use_alt_functions(spec) ({ (void)(spec); false; })
|
|
#define ca0132_use_pci_mmio(spec) ({ (void)(spec); false; })
|
|
#define ca0132_use_alt_controls(spec) ({ (void)(spec); false; })
|
|
#endif
|
|
|
|
static const struct hda_pintbl alienware_pincfgs[] = {
|
|
{ 0x0b, 0x90170110 }, /* Builtin Speaker */
|
|
{ 0x0c, 0x411111f0 }, /* N/A */
|
|
{ 0x0d, 0x411111f0 }, /* N/A */
|
|
{ 0x0e, 0x411111f0 }, /* N/A */
|
|
{ 0x0f, 0x0321101f }, /* HP */
|
|
{ 0x10, 0x411111f0 }, /* Headset? disabled for now */
|
|
{ 0x11, 0x03a11021 }, /* Mic */
|
|
{ 0x12, 0xd5a30140 }, /* Builtin Mic */
|
|
{ 0x13, 0x411111f0 }, /* N/A */
|
|
{ 0x18, 0x411111f0 }, /* N/A */
|
|
{}
|
|
};
|
|
|
|
/* Sound Blaster Z pin configs taken from Windows Driver */
|
|
static const struct hda_pintbl sbz_pincfgs[] = {
|
|
{ 0x0b, 0x01017010 }, /* Port G -- Lineout FRONT L/R */
|
|
{ 0x0c, 0x014510f0 }, /* SPDIF Out 1 */
|
|
{ 0x0d, 0x014510f0 }, /* Digital Out */
|
|
{ 0x0e, 0x01c510f0 }, /* SPDIF In */
|
|
{ 0x0f, 0x0221701f }, /* Port A -- BackPanel HP */
|
|
{ 0x10, 0x01017012 }, /* Port D -- Center/LFE or FP Hp */
|
|
{ 0x11, 0x01017014 }, /* Port B -- LineMicIn2 / Rear L/R */
|
|
{ 0x12, 0x01a170f0 }, /* Port C -- LineIn1 */
|
|
{ 0x13, 0x908700f0 }, /* What U Hear In*/
|
|
{ 0x18, 0x50d000f0 }, /* N/A */
|
|
{}
|
|
};
|
|
|
|
/* Sound Blaster ZxR pin configs taken from Windows Driver */
|
|
static const struct hda_pintbl zxr_pincfgs[] = {
|
|
{ 0x0b, 0x01047110 }, /* Port G -- Lineout FRONT L/R */
|
|
{ 0x0c, 0x414510f0 }, /* SPDIF Out 1 - Disabled*/
|
|
{ 0x0d, 0x014510f0 }, /* Digital Out */
|
|
{ 0x0e, 0x41c520f0 }, /* SPDIF In - Disabled*/
|
|
{ 0x0f, 0x0122711f }, /* Port A -- BackPanel HP */
|
|
{ 0x10, 0x01017111 }, /* Port D -- Center/LFE */
|
|
{ 0x11, 0x01017114 }, /* Port B -- LineMicIn2 / Rear L/R */
|
|
{ 0x12, 0x01a271f0 }, /* Port C -- LineIn1 */
|
|
{ 0x13, 0x908700f0 }, /* What U Hear In*/
|
|
{ 0x18, 0x50d000f0 }, /* N/A */
|
|
{}
|
|
};
|
|
|
|
/* Recon3D pin configs taken from Windows Driver */
|
|
static const struct hda_pintbl r3d_pincfgs[] = {
|
|
{ 0x0b, 0x01014110 }, /* Port G -- Lineout FRONT L/R */
|
|
{ 0x0c, 0x014510f0 }, /* SPDIF Out 1 */
|
|
{ 0x0d, 0x014510f0 }, /* Digital Out */
|
|
{ 0x0e, 0x01c520f0 }, /* SPDIF In */
|
|
{ 0x0f, 0x0221401f }, /* Port A -- BackPanel HP */
|
|
{ 0x10, 0x01016011 }, /* Port D -- Center/LFE or FP Hp */
|
|
{ 0x11, 0x01011014 }, /* Port B -- LineMicIn2 / Rear L/R */
|
|
{ 0x12, 0x02a090f0 }, /* Port C -- LineIn1 */
|
|
{ 0x13, 0x908700f0 }, /* What U Hear In*/
|
|
{ 0x18, 0x50d000f0 }, /* N/A */
|
|
{}
|
|
};
|
|
|
|
/* Sound Blaster AE-5 pin configs taken from Windows Driver */
|
|
static const struct hda_pintbl ae5_pincfgs[] = {
|
|
{ 0x0b, 0x01017010 }, /* Port G -- Lineout FRONT L/R */
|
|
{ 0x0c, 0x014510f0 }, /* SPDIF Out 1 */
|
|
{ 0x0d, 0x014510f0 }, /* Digital Out */
|
|
{ 0x0e, 0x01c510f0 }, /* SPDIF In */
|
|
{ 0x0f, 0x01017114 }, /* Port A -- Rear L/R. */
|
|
{ 0x10, 0x01017012 }, /* Port D -- Center/LFE or FP Hp */
|
|
{ 0x11, 0x012170ff }, /* Port B -- LineMicIn2 / Rear Headphone */
|
|
{ 0x12, 0x01a170f0 }, /* Port C -- LineIn1 */
|
|
{ 0x13, 0x908700f0 }, /* What U Hear In*/
|
|
{ 0x18, 0x50d000f0 }, /* N/A */
|
|
{}
|
|
};
|
|
|
|
/* Recon3D integrated pin configs taken from Windows Driver */
|
|
static const struct hda_pintbl r3di_pincfgs[] = {
|
|
{ 0x0b, 0x01014110 }, /* Port G -- Lineout FRONT L/R */
|
|
{ 0x0c, 0x014510f0 }, /* SPDIF Out 1 */
|
|
{ 0x0d, 0x014510f0 }, /* Digital Out */
|
|
{ 0x0e, 0x41c520f0 }, /* SPDIF In */
|
|
{ 0x0f, 0x0221401f }, /* Port A -- BackPanel HP */
|
|
{ 0x10, 0x01016011 }, /* Port D -- Center/LFE or FP Hp */
|
|
{ 0x11, 0x01011014 }, /* Port B -- LineMicIn2 / Rear L/R */
|
|
{ 0x12, 0x02a090f0 }, /* Port C -- LineIn1 */
|
|
{ 0x13, 0x908700f0 }, /* What U Hear In*/
|
|
{ 0x18, 0x500000f0 }, /* N/A */
|
|
{}
|
|
};
|
|
|
|
static const struct snd_pci_quirk ca0132_quirks[] = {
|
|
SND_PCI_QUIRK(0x1028, 0x057b, "Alienware M17x R4", QUIRK_ALIENWARE_M17XR4),
|
|
SND_PCI_QUIRK(0x1028, 0x0685, "Alienware 15 2015", QUIRK_ALIENWARE),
|
|
SND_PCI_QUIRK(0x1028, 0x0688, "Alienware 17 2015", QUIRK_ALIENWARE),
|
|
SND_PCI_QUIRK(0x1028, 0x0708, "Alienware 15 R2 2016", QUIRK_ALIENWARE),
|
|
SND_PCI_QUIRK(0x1102, 0x0010, "Sound Blaster Z", QUIRK_SBZ),
|
|
SND_PCI_QUIRK(0x1102, 0x0023, "Sound Blaster Z", QUIRK_SBZ),
|
|
SND_PCI_QUIRK(0x1102, 0x0027, "Sound Blaster Z", QUIRK_SBZ),
|
|
SND_PCI_QUIRK(0x1102, 0x0033, "Sound Blaster ZxR", QUIRK_SBZ),
|
|
SND_PCI_QUIRK(0x1458, 0xA016, "Recon3Di", QUIRK_R3DI),
|
|
SND_PCI_QUIRK(0x1458, 0xA026, "Gigabyte G1.Sniper Z97", QUIRK_R3DI),
|
|
SND_PCI_QUIRK(0x1458, 0xA036, "Gigabyte GA-Z170X-Gaming 7", QUIRK_R3DI),
|
|
SND_PCI_QUIRK(0x3842, 0x1038, "EVGA X99 Classified", QUIRK_R3DI),
|
|
SND_PCI_QUIRK(0x3842, 0x1055, "EVGA Z390 DARK", QUIRK_R3DI),
|
|
SND_PCI_QUIRK(0x1102, 0x0013, "Recon3D", QUIRK_R3D),
|
|
SND_PCI_QUIRK(0x1102, 0x0018, "Recon3D", QUIRK_R3D),
|
|
SND_PCI_QUIRK(0x1102, 0x0051, "Sound Blaster AE-5", QUIRK_AE5),
|
|
SND_PCI_QUIRK(0x1102, 0x0191, "Sound Blaster AE-5 Plus", QUIRK_AE5),
|
|
SND_PCI_QUIRK(0x1102, 0x0081, "Sound Blaster AE-7", QUIRK_AE7),
|
|
{}
|
|
};
|
|
|
|
/*
|
|
* CA0132 codec access
|
|
*/
|
|
static unsigned int codec_send_command(struct hda_codec *codec, hda_nid_t nid,
|
|
unsigned int verb, unsigned int parm, unsigned int *res)
|
|
{
|
|
unsigned int response;
|
|
response = snd_hda_codec_read(codec, nid, 0, verb, parm);
|
|
*res = response;
|
|
|
|
return ((response == -1) ? -1 : 0);
|
|
}
|
|
|
|
static int codec_set_converter_format(struct hda_codec *codec, hda_nid_t nid,
|
|
unsigned short converter_format, unsigned int *res)
|
|
{
|
|
return codec_send_command(codec, nid, VENDOR_CHIPIO_STREAM_FORMAT,
|
|
converter_format & 0xffff, res);
|
|
}
|
|
|
|
static int codec_set_converter_stream_channel(struct hda_codec *codec,
|
|
hda_nid_t nid, unsigned char stream,
|
|
unsigned char channel, unsigned int *res)
|
|
{
|
|
unsigned char converter_stream_channel = 0;
|
|
|
|
converter_stream_channel = (stream << 4) | (channel & 0x0f);
|
|
return codec_send_command(codec, nid, AC_VERB_SET_CHANNEL_STREAMID,
|
|
converter_stream_channel, res);
|
|
}
|
|
|
|
/* Chip access helper function */
|
|
static int chipio_send(struct hda_codec *codec,
|
|
unsigned int reg,
|
|
unsigned int data)
|
|
{
|
|
unsigned int res;
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(1000);
|
|
|
|
/* send bits of data specified by reg */
|
|
do {
|
|
res = snd_hda_codec_read(codec, WIDGET_CHIP_CTRL, 0,
|
|
reg, data);
|
|
if (res == VENDOR_STATUS_CHIPIO_OK)
|
|
return 0;
|
|
msleep(20);
|
|
} while (time_before(jiffies, timeout));
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
/*
|
|
* Write chip address through the vendor widget -- NOT protected by the Mutex!
|
|
*/
|
|
static int chipio_write_address(struct hda_codec *codec,
|
|
unsigned int chip_addx)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
int res;
|
|
|
|
if (spec->curr_chip_addx == chip_addx)
|
|
return 0;
|
|
|
|
/* send low 16 bits of the address */
|
|
res = chipio_send(codec, VENDOR_CHIPIO_ADDRESS_LOW,
|
|
chip_addx & 0xffff);
|
|
|
|
if (res != -EIO) {
|
|
/* send high 16 bits of the address */
|
|
res = chipio_send(codec, VENDOR_CHIPIO_ADDRESS_HIGH,
|
|
chip_addx >> 16);
|
|
}
|
|
|
|
spec->curr_chip_addx = (res < 0) ? ~0U : chip_addx;
|
|
|
|
return res;
|
|
}
|
|
|
|
/*
|
|
* Write data through the vendor widget -- NOT protected by the Mutex!
|
|
*/
|
|
static int chipio_write_data(struct hda_codec *codec, unsigned int data)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
int res;
|
|
|
|
/* send low 16 bits of the data */
|
|
res = chipio_send(codec, VENDOR_CHIPIO_DATA_LOW, data & 0xffff);
|
|
|
|
if (res != -EIO) {
|
|
/* send high 16 bits of the data */
|
|
res = chipio_send(codec, VENDOR_CHIPIO_DATA_HIGH,
|
|
data >> 16);
|
|
}
|
|
|
|
/*If no error encountered, automatically increment the address
|
|
as per chip behaviour*/
|
|
spec->curr_chip_addx = (res != -EIO) ?
|
|
(spec->curr_chip_addx + 4) : ~0U;
|
|
return res;
|
|
}
|
|
|
|
/*
|
|
* Write multiple data through the vendor widget -- NOT protected by the Mutex!
|
|
*/
|
|
static int chipio_write_data_multiple(struct hda_codec *codec,
|
|
const u32 *data,
|
|
unsigned int count)
|
|
{
|
|
int status = 0;
|
|
|
|
if (data == NULL) {
|
|
codec_dbg(codec, "chipio_write_data null ptr\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
while ((count-- != 0) && (status == 0))
|
|
status = chipio_write_data(codec, *data++);
|
|
|
|
return status;
|
|
}
|
|
|
|
|
|
/*
|
|
* Read data through the vendor widget -- NOT protected by the Mutex!
|
|
*/
|
|
static int chipio_read_data(struct hda_codec *codec, unsigned int *data)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
int res;
|
|
|
|
/* post read */
|
|
res = chipio_send(codec, VENDOR_CHIPIO_HIC_POST_READ, 0);
|
|
|
|
if (res != -EIO) {
|
|
/* read status */
|
|
res = chipio_send(codec, VENDOR_CHIPIO_STATUS, 0);
|
|
}
|
|
|
|
if (res != -EIO) {
|
|
/* read data */
|
|
*data = snd_hda_codec_read(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_HIC_READ_DATA,
|
|
0);
|
|
}
|
|
|
|
/*If no error encountered, automatically increment the address
|
|
as per chip behaviour*/
|
|
spec->curr_chip_addx = (res != -EIO) ?
|
|
(spec->curr_chip_addx + 4) : ~0U;
|
|
return res;
|
|
}
|
|
|
|
/*
|
|
* Write given value to the given address through the chip I/O widget.
|
|
* protected by the Mutex
|
|
*/
|
|
static int chipio_write(struct hda_codec *codec,
|
|
unsigned int chip_addx, const unsigned int data)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
int err;
|
|
|
|
mutex_lock(&spec->chipio_mutex);
|
|
|
|
/* write the address, and if successful proceed to write data */
|
|
err = chipio_write_address(codec, chip_addx);
|
|
if (err < 0)
|
|
goto exit;
|
|
|
|
err = chipio_write_data(codec, data);
|
|
if (err < 0)
|
|
goto exit;
|
|
|
|
exit:
|
|
mutex_unlock(&spec->chipio_mutex);
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* Write given value to the given address through the chip I/O widget.
|
|
* not protected by the Mutex
|
|
*/
|
|
static int chipio_write_no_mutex(struct hda_codec *codec,
|
|
unsigned int chip_addx, const unsigned int data)
|
|
{
|
|
int err;
|
|
|
|
|
|
/* write the address, and if successful proceed to write data */
|
|
err = chipio_write_address(codec, chip_addx);
|
|
if (err < 0)
|
|
goto exit;
|
|
|
|
err = chipio_write_data(codec, data);
|
|
if (err < 0)
|
|
goto exit;
|
|
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* Write multiple values to the given address through the chip I/O widget.
|
|
* protected by the Mutex
|
|
*/
|
|
static int chipio_write_multiple(struct hda_codec *codec,
|
|
u32 chip_addx,
|
|
const u32 *data,
|
|
unsigned int count)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
int status;
|
|
|
|
mutex_lock(&spec->chipio_mutex);
|
|
status = chipio_write_address(codec, chip_addx);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = chipio_write_data_multiple(codec, data, count);
|
|
error:
|
|
mutex_unlock(&spec->chipio_mutex);
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* Read the given address through the chip I/O widget
|
|
* protected by the Mutex
|
|
*/
|
|
static int chipio_read(struct hda_codec *codec,
|
|
unsigned int chip_addx, unsigned int *data)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
int err;
|
|
|
|
mutex_lock(&spec->chipio_mutex);
|
|
|
|
/* write the address, and if successful proceed to write data */
|
|
err = chipio_write_address(codec, chip_addx);
|
|
if (err < 0)
|
|
goto exit;
|
|
|
|
err = chipio_read_data(codec, data);
|
|
if (err < 0)
|
|
goto exit;
|
|
|
|
exit:
|
|
mutex_unlock(&spec->chipio_mutex);
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* Set chip control flags through the chip I/O widget.
|
|
*/
|
|
static void chipio_set_control_flag(struct hda_codec *codec,
|
|
enum control_flag_id flag_id,
|
|
bool flag_state)
|
|
{
|
|
unsigned int val;
|
|
unsigned int flag_bit;
|
|
|
|
flag_bit = (flag_state ? 1 : 0);
|
|
val = (flag_bit << 7) | (flag_id);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_FLAG_SET, val);
|
|
}
|
|
|
|
/*
|
|
* Set chip parameters through the chip I/O widget.
|
|
*/
|
|
static void chipio_set_control_param(struct hda_codec *codec,
|
|
enum control_param_id param_id, int param_val)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
int val;
|
|
|
|
if ((param_id < 32) && (param_val < 8)) {
|
|
val = (param_val << 5) | (param_id);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_PARAM_SET, val);
|
|
} else {
|
|
mutex_lock(&spec->chipio_mutex);
|
|
if (chipio_send(codec, VENDOR_CHIPIO_STATUS, 0) == 0) {
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_PARAM_EX_ID_SET,
|
|
param_id);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_PARAM_EX_VALUE_SET,
|
|
param_val);
|
|
}
|
|
mutex_unlock(&spec->chipio_mutex);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Set chip parameters through the chip I/O widget. NO MUTEX.
|
|
*/
|
|
static void chipio_set_control_param_no_mutex(struct hda_codec *codec,
|
|
enum control_param_id param_id, int param_val)
|
|
{
|
|
int val;
|
|
|
|
if ((param_id < 32) && (param_val < 8)) {
|
|
val = (param_val << 5) | (param_id);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_PARAM_SET, val);
|
|
} else {
|
|
if (chipio_send(codec, VENDOR_CHIPIO_STATUS, 0) == 0) {
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_PARAM_EX_ID_SET,
|
|
param_id);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_PARAM_EX_VALUE_SET,
|
|
param_val);
|
|
}
|
|
}
|
|
}
|
|
/*
|
|
* Connect stream to a source point, and then connect
|
|
* that source point to a destination point.
|
|
*/
|
|
static void chipio_set_stream_source_dest(struct hda_codec *codec,
|
|
int streamid, int source_point, int dest_point)
|
|
{
|
|
chipio_set_control_param_no_mutex(codec,
|
|
CONTROL_PARAM_STREAM_ID, streamid);
|
|
chipio_set_control_param_no_mutex(codec,
|
|
CONTROL_PARAM_STREAM_SOURCE_CONN_POINT, source_point);
|
|
chipio_set_control_param_no_mutex(codec,
|
|
CONTROL_PARAM_STREAM_DEST_CONN_POINT, dest_point);
|
|
}
|
|
|
|
/*
|
|
* Set number of channels in the selected stream.
|
|
*/
|
|
static void chipio_set_stream_channels(struct hda_codec *codec,
|
|
int streamid, unsigned int channels)
|
|
{
|
|
chipio_set_control_param_no_mutex(codec,
|
|
CONTROL_PARAM_STREAM_ID, streamid);
|
|
chipio_set_control_param_no_mutex(codec,
|
|
CONTROL_PARAM_STREAMS_CHANNELS, channels);
|
|
}
|
|
|
|
/*
|
|
* Enable/Disable audio stream.
|
|
*/
|
|
static void chipio_set_stream_control(struct hda_codec *codec,
|
|
int streamid, int enable)
|
|
{
|
|
chipio_set_control_param_no_mutex(codec,
|
|
CONTROL_PARAM_STREAM_ID, streamid);
|
|
chipio_set_control_param_no_mutex(codec,
|
|
CONTROL_PARAM_STREAM_CONTROL, enable);
|
|
}
|
|
|
|
|
|
/*
|
|
* Set sampling rate of the connection point. NO MUTEX.
|
|
*/
|
|
static void chipio_set_conn_rate_no_mutex(struct hda_codec *codec,
|
|
int connid, enum ca0132_sample_rate rate)
|
|
{
|
|
chipio_set_control_param_no_mutex(codec,
|
|
CONTROL_PARAM_CONN_POINT_ID, connid);
|
|
chipio_set_control_param_no_mutex(codec,
|
|
CONTROL_PARAM_CONN_POINT_SAMPLE_RATE, rate);
|
|
}
|
|
|
|
/*
|
|
* Set sampling rate of the connection point.
|
|
*/
|
|
static void chipio_set_conn_rate(struct hda_codec *codec,
|
|
int connid, enum ca0132_sample_rate rate)
|
|
{
|
|
chipio_set_control_param(codec, CONTROL_PARAM_CONN_POINT_ID, connid);
|
|
chipio_set_control_param(codec, CONTROL_PARAM_CONN_POINT_SAMPLE_RATE,
|
|
rate);
|
|
}
|
|
|
|
/*
|
|
* Writes to the 8051's internal address space directly instead of indirectly,
|
|
* giving access to the special function registers located at addresses
|
|
* 0x80-0xFF.
|
|
*/
|
|
static void chipio_8051_write_direct(struct hda_codec *codec,
|
|
unsigned int addr, unsigned int data)
|
|
{
|
|
unsigned int verb;
|
|
|
|
verb = VENDOR_CHIPIO_8051_WRITE_DIRECT | data;
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, verb, addr);
|
|
}
|
|
|
|
/*
|
|
* Enable clocks.
|
|
*/
|
|
static void chipio_enable_clocks(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
mutex_lock(&spec->chipio_mutex);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_ADDRESS_LOW, 0);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_PLL_PMU_WRITE, 0xff);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_ADDRESS_LOW, 5);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_PLL_PMU_WRITE, 0x0b);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_ADDRESS_LOW, 6);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_PLL_PMU_WRITE, 0xff);
|
|
mutex_unlock(&spec->chipio_mutex);
|
|
}
|
|
|
|
/*
|
|
* CA0132 DSP IO stuffs
|
|
*/
|
|
static int dspio_send(struct hda_codec *codec, unsigned int reg,
|
|
unsigned int data)
|
|
{
|
|
int res;
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(1000);
|
|
|
|
/* send bits of data specified by reg to dsp */
|
|
do {
|
|
res = snd_hda_codec_read(codec, WIDGET_DSP_CTRL, 0, reg, data);
|
|
if ((res >= 0) && (res != VENDOR_STATUS_DSPIO_BUSY))
|
|
return res;
|
|
msleep(20);
|
|
} while (time_before(jiffies, timeout));
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
/*
|
|
* Wait for DSP to be ready for commands
|
|
*/
|
|
static void dspio_write_wait(struct hda_codec *codec)
|
|
{
|
|
int status;
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(1000);
|
|
|
|
do {
|
|
status = snd_hda_codec_read(codec, WIDGET_DSP_CTRL, 0,
|
|
VENDOR_DSPIO_STATUS, 0);
|
|
if ((status == VENDOR_STATUS_DSPIO_OK) ||
|
|
(status == VENDOR_STATUS_DSPIO_SCP_RESPONSE_QUEUE_EMPTY))
|
|
break;
|
|
msleep(1);
|
|
} while (time_before(jiffies, timeout));
|
|
}
|
|
|
|
/*
|
|
* Write SCP data to DSP
|
|
*/
|
|
static int dspio_write(struct hda_codec *codec, unsigned int scp_data)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
int status;
|
|
|
|
dspio_write_wait(codec);
|
|
|
|
mutex_lock(&spec->chipio_mutex);
|
|
status = dspio_send(codec, VENDOR_DSPIO_SCP_WRITE_DATA_LOW,
|
|
scp_data & 0xffff);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
status = dspio_send(codec, VENDOR_DSPIO_SCP_WRITE_DATA_HIGH,
|
|
scp_data >> 16);
|
|
if (status < 0)
|
|
goto error;
|
|
|
|
/* OK, now check if the write itself has executed*/
|
|
status = snd_hda_codec_read(codec, WIDGET_DSP_CTRL, 0,
|
|
VENDOR_DSPIO_STATUS, 0);
|
|
error:
|
|
mutex_unlock(&spec->chipio_mutex);
|
|
|
|
return (status == VENDOR_STATUS_DSPIO_SCP_COMMAND_QUEUE_FULL) ?
|
|
-EIO : 0;
|
|
}
|
|
|
|
/*
|
|
* Write multiple SCP data to DSP
|
|
*/
|
|
static int dspio_write_multiple(struct hda_codec *codec,
|
|
unsigned int *buffer, unsigned int size)
|
|
{
|
|
int status = 0;
|
|
unsigned int count;
|
|
|
|
if (buffer == NULL)
|
|
return -EINVAL;
|
|
|
|
count = 0;
|
|
while (count < size) {
|
|
status = dspio_write(codec, *buffer++);
|
|
if (status != 0)
|
|
break;
|
|
count++;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
static int dspio_read(struct hda_codec *codec, unsigned int *data)
|
|
{
|
|
int status;
|
|
|
|
status = dspio_send(codec, VENDOR_DSPIO_SCP_POST_READ_DATA, 0);
|
|
if (status == -EIO)
|
|
return status;
|
|
|
|
status = dspio_send(codec, VENDOR_DSPIO_STATUS, 0);
|
|
if (status == -EIO ||
|
|
status == VENDOR_STATUS_DSPIO_SCP_RESPONSE_QUEUE_EMPTY)
|
|
return -EIO;
|
|
|
|
*data = snd_hda_codec_read(codec, WIDGET_DSP_CTRL, 0,
|
|
VENDOR_DSPIO_SCP_READ_DATA, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dspio_read_multiple(struct hda_codec *codec, unsigned int *buffer,
|
|
unsigned int *buf_size, unsigned int size_count)
|
|
{
|
|
int status = 0;
|
|
unsigned int size = *buf_size;
|
|
unsigned int count;
|
|
unsigned int skip_count;
|
|
unsigned int dummy;
|
|
|
|
if (buffer == NULL)
|
|
return -1;
|
|
|
|
count = 0;
|
|
while (count < size && count < size_count) {
|
|
status = dspio_read(codec, buffer++);
|
|
if (status != 0)
|
|
break;
|
|
count++;
|
|
}
|
|
|
|
skip_count = count;
|
|
if (status == 0) {
|
|
while (skip_count < size) {
|
|
status = dspio_read(codec, &dummy);
|
|
if (status != 0)
|
|
break;
|
|
skip_count++;
|
|
}
|
|
}
|
|
*buf_size = count;
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* Construct the SCP header using corresponding fields
|
|
*/
|
|
static inline unsigned int
|
|
make_scp_header(unsigned int target_id, unsigned int source_id,
|
|
unsigned int get_flag, unsigned int req,
|
|
unsigned int device_flag, unsigned int resp_flag,
|
|
unsigned int error_flag, unsigned int data_size)
|
|
{
|
|
unsigned int header = 0;
|
|
|
|
header = (data_size & 0x1f) << 27;
|
|
header |= (error_flag & 0x01) << 26;
|
|
header |= (resp_flag & 0x01) << 25;
|
|
header |= (device_flag & 0x01) << 24;
|
|
header |= (req & 0x7f) << 17;
|
|
header |= (get_flag & 0x01) << 16;
|
|
header |= (source_id & 0xff) << 8;
|
|
header |= target_id & 0xff;
|
|
|
|
return header;
|
|
}
|
|
|
|
/*
|
|
* Extract corresponding fields from SCP header
|
|
*/
|
|
static inline void
|
|
extract_scp_header(unsigned int header,
|
|
unsigned int *target_id, unsigned int *source_id,
|
|
unsigned int *get_flag, unsigned int *req,
|
|
unsigned int *device_flag, unsigned int *resp_flag,
|
|
unsigned int *error_flag, unsigned int *data_size)
|
|
{
|
|
if (data_size)
|
|
*data_size = (header >> 27) & 0x1f;
|
|
if (error_flag)
|
|
*error_flag = (header >> 26) & 0x01;
|
|
if (resp_flag)
|
|
*resp_flag = (header >> 25) & 0x01;
|
|
if (device_flag)
|
|
*device_flag = (header >> 24) & 0x01;
|
|
if (req)
|
|
*req = (header >> 17) & 0x7f;
|
|
if (get_flag)
|
|
*get_flag = (header >> 16) & 0x01;
|
|
if (source_id)
|
|
*source_id = (header >> 8) & 0xff;
|
|
if (target_id)
|
|
*target_id = header & 0xff;
|
|
}
|
|
|
|
#define SCP_MAX_DATA_WORDS (16)
|
|
|
|
/* Structure to contain any SCP message */
|
|
struct scp_msg {
|
|
unsigned int hdr;
|
|
unsigned int data[SCP_MAX_DATA_WORDS];
|
|
};
|
|
|
|
static void dspio_clear_response_queue(struct hda_codec *codec)
|
|
{
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(1000);
|
|
unsigned int dummy = 0;
|
|
int status;
|
|
|
|
/* clear all from the response queue */
|
|
do {
|
|
status = dspio_read(codec, &dummy);
|
|
} while (status == 0 && time_before(jiffies, timeout));
|
|
}
|
|
|
|
static int dspio_get_response_data(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
unsigned int data = 0;
|
|
unsigned int count;
|
|
|
|
if (dspio_read(codec, &data) < 0)
|
|
return -EIO;
|
|
|
|
if ((data & 0x00ffffff) == spec->wait_scp_header) {
|
|
spec->scp_resp_header = data;
|
|
spec->scp_resp_count = data >> 27;
|
|
count = spec->wait_num_data;
|
|
dspio_read_multiple(codec, spec->scp_resp_data,
|
|
&spec->scp_resp_count, count);
|
|
return 0;
|
|
}
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
/*
|
|
* Send SCP message to DSP
|
|
*/
|
|
static int dspio_send_scp_message(struct hda_codec *codec,
|
|
unsigned char *send_buf,
|
|
unsigned int send_buf_size,
|
|
unsigned char *return_buf,
|
|
unsigned int return_buf_size,
|
|
unsigned int *bytes_returned)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
int status = -1;
|
|
unsigned int scp_send_size = 0;
|
|
unsigned int total_size;
|
|
bool waiting_for_resp = false;
|
|
unsigned int header;
|
|
struct scp_msg *ret_msg;
|
|
unsigned int resp_src_id, resp_target_id;
|
|
unsigned int data_size, src_id, target_id, get_flag, device_flag;
|
|
|
|
if (bytes_returned)
|
|
*bytes_returned = 0;
|
|
|
|
/* get scp header from buffer */
|
|
header = *((unsigned int *)send_buf);
|
|
extract_scp_header(header, &target_id, &src_id, &get_flag, NULL,
|
|
&device_flag, NULL, NULL, &data_size);
|
|
scp_send_size = data_size + 1;
|
|
total_size = (scp_send_size * 4);
|
|
|
|
if (send_buf_size < total_size)
|
|
return -EINVAL;
|
|
|
|
if (get_flag || device_flag) {
|
|
if (!return_buf || return_buf_size < 4 || !bytes_returned)
|
|
return -EINVAL;
|
|
|
|
spec->wait_scp_header = *((unsigned int *)send_buf);
|
|
|
|
/* swap source id with target id */
|
|
resp_target_id = src_id;
|
|
resp_src_id = target_id;
|
|
spec->wait_scp_header &= 0xffff0000;
|
|
spec->wait_scp_header |= (resp_src_id << 8) | (resp_target_id);
|
|
spec->wait_num_data = return_buf_size/sizeof(unsigned int) - 1;
|
|
spec->wait_scp = 1;
|
|
waiting_for_resp = true;
|
|
}
|
|
|
|
status = dspio_write_multiple(codec, (unsigned int *)send_buf,
|
|
scp_send_size);
|
|
if (status < 0) {
|
|
spec->wait_scp = 0;
|
|
return status;
|
|
}
|
|
|
|
if (waiting_for_resp) {
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(1000);
|
|
memset(return_buf, 0, return_buf_size);
|
|
do {
|
|
msleep(20);
|
|
} while (spec->wait_scp && time_before(jiffies, timeout));
|
|
waiting_for_resp = false;
|
|
if (!spec->wait_scp) {
|
|
ret_msg = (struct scp_msg *)return_buf;
|
|
memcpy(&ret_msg->hdr, &spec->scp_resp_header, 4);
|
|
memcpy(&ret_msg->data, spec->scp_resp_data,
|
|
spec->wait_num_data);
|
|
*bytes_returned = (spec->scp_resp_count + 1) * 4;
|
|
status = 0;
|
|
} else {
|
|
status = -EIO;
|
|
}
|
|
spec->wait_scp = 0;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* Prepare and send the SCP message to DSP
|
|
* @codec: the HDA codec
|
|
* @mod_id: ID of the DSP module to send the command
|
|
* @req: ID of request to send to the DSP module
|
|
* @dir: SET or GET
|
|
* @data: pointer to the data to send with the request, request specific
|
|
* @len: length of the data, in bytes
|
|
* @reply: point to the buffer to hold data returned for a reply
|
|
* @reply_len: length of the reply buffer returned from GET
|
|
*
|
|
* Returns zero or a negative error code.
|
|
*/
|
|
static int dspio_scp(struct hda_codec *codec,
|
|
int mod_id, int src_id, int req, int dir, const void *data,
|
|
unsigned int len, void *reply, unsigned int *reply_len)
|
|
{
|
|
int status = 0;
|
|
struct scp_msg scp_send, scp_reply;
|
|
unsigned int ret_bytes, send_size, ret_size;
|
|
unsigned int send_get_flag, reply_resp_flag, reply_error_flag;
|
|
unsigned int reply_data_size;
|
|
|
|
memset(&scp_send, 0, sizeof(scp_send));
|
|
memset(&scp_reply, 0, sizeof(scp_reply));
|
|
|
|
if ((len != 0 && data == NULL) || (len > SCP_MAX_DATA_WORDS))
|
|
return -EINVAL;
|
|
|
|
if (dir == SCP_GET && reply == NULL) {
|
|
codec_dbg(codec, "dspio_scp get but has no buffer\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (reply != NULL && (reply_len == NULL || (*reply_len == 0))) {
|
|
codec_dbg(codec, "dspio_scp bad resp buf len parms\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
scp_send.hdr = make_scp_header(mod_id, src_id, (dir == SCP_GET), req,
|
|
0, 0, 0, len/sizeof(unsigned int));
|
|
if (data != NULL && len > 0) {
|
|
len = min((unsigned int)(sizeof(scp_send.data)), len);
|
|
memcpy(scp_send.data, data, len);
|
|
}
|
|
|
|
ret_bytes = 0;
|
|
send_size = sizeof(unsigned int) + len;
|
|
status = dspio_send_scp_message(codec, (unsigned char *)&scp_send,
|
|
send_size, (unsigned char *)&scp_reply,
|
|
sizeof(scp_reply), &ret_bytes);
|
|
|
|
if (status < 0) {
|
|
codec_dbg(codec, "dspio_scp: send scp msg failed\n");
|
|
return status;
|
|
}
|
|
|
|
/* extract send and reply headers members */
|
|
extract_scp_header(scp_send.hdr, NULL, NULL, &send_get_flag,
|
|
NULL, NULL, NULL, NULL, NULL);
|
|
extract_scp_header(scp_reply.hdr, NULL, NULL, NULL, NULL, NULL,
|
|
&reply_resp_flag, &reply_error_flag,
|
|
&reply_data_size);
|
|
|
|
if (!send_get_flag)
|
|
return 0;
|
|
|
|
if (reply_resp_flag && !reply_error_flag) {
|
|
ret_size = (ret_bytes - sizeof(scp_reply.hdr))
|
|
/ sizeof(unsigned int);
|
|
|
|
if (*reply_len < ret_size*sizeof(unsigned int)) {
|
|
codec_dbg(codec, "reply too long for buf\n");
|
|
return -EINVAL;
|
|
} else if (ret_size != reply_data_size) {
|
|
codec_dbg(codec, "RetLen and HdrLen .NE.\n");
|
|
return -EINVAL;
|
|
} else if (!reply) {
|
|
codec_dbg(codec, "NULL reply\n");
|
|
return -EINVAL;
|
|
} else {
|
|
*reply_len = ret_size*sizeof(unsigned int);
|
|
memcpy(reply, scp_reply.data, *reply_len);
|
|
}
|
|
} else {
|
|
codec_dbg(codec, "reply ill-formed or errflag set\n");
|
|
return -EIO;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* Set DSP parameters
|
|
*/
|
|
static int dspio_set_param(struct hda_codec *codec, int mod_id,
|
|
int src_id, int req, const void *data, unsigned int len)
|
|
{
|
|
return dspio_scp(codec, mod_id, src_id, req, SCP_SET, data, len, NULL,
|
|
NULL);
|
|
}
|
|
|
|
static int dspio_set_uint_param(struct hda_codec *codec, int mod_id,
|
|
int req, const unsigned int data)
|
|
{
|
|
return dspio_set_param(codec, mod_id, 0x20, req, &data,
|
|
sizeof(unsigned int));
|
|
}
|
|
|
|
static int dspio_set_uint_param_no_source(struct hda_codec *codec, int mod_id,
|
|
int req, const unsigned int data)
|
|
{
|
|
return dspio_set_param(codec, mod_id, 0x00, req, &data,
|
|
sizeof(unsigned int));
|
|
}
|
|
|
|
/*
|
|
* Allocate a DSP DMA channel via an SCP message
|
|
*/
|
|
static int dspio_alloc_dma_chan(struct hda_codec *codec, unsigned int *dma_chan)
|
|
{
|
|
int status = 0;
|
|
unsigned int size = sizeof(*dma_chan);
|
|
|
|
codec_dbg(codec, " dspio_alloc_dma_chan() -- begin\n");
|
|
status = dspio_scp(codec, MASTERCONTROL, 0x20,
|
|
MASTERCONTROL_ALLOC_DMA_CHAN, SCP_GET, NULL, 0,
|
|
dma_chan, &size);
|
|
|
|
if (status < 0) {
|
|
codec_dbg(codec, "dspio_alloc_dma_chan: SCP Failed\n");
|
|
return status;
|
|
}
|
|
|
|
if ((*dma_chan + 1) == 0) {
|
|
codec_dbg(codec, "no free dma channels to allocate\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
codec_dbg(codec, "dspio_alloc_dma_chan: chan=%d\n", *dma_chan);
|
|
codec_dbg(codec, " dspio_alloc_dma_chan() -- complete\n");
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* Free a DSP DMA via an SCP message
|
|
*/
|
|
static int dspio_free_dma_chan(struct hda_codec *codec, unsigned int dma_chan)
|
|
{
|
|
int status = 0;
|
|
unsigned int dummy = 0;
|
|
|
|
codec_dbg(codec, " dspio_free_dma_chan() -- begin\n");
|
|
codec_dbg(codec, "dspio_free_dma_chan: chan=%d\n", dma_chan);
|
|
|
|
status = dspio_scp(codec, MASTERCONTROL, 0x20,
|
|
MASTERCONTROL_ALLOC_DMA_CHAN, SCP_SET, &dma_chan,
|
|
sizeof(dma_chan), NULL, &dummy);
|
|
|
|
if (status < 0) {
|
|
codec_dbg(codec, "dspio_free_dma_chan: SCP Failed\n");
|
|
return status;
|
|
}
|
|
|
|
codec_dbg(codec, " dspio_free_dma_chan() -- complete\n");
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* (Re)start the DSP
|
|
*/
|
|
static int dsp_set_run_state(struct hda_codec *codec)
|
|
{
|
|
unsigned int dbg_ctrl_reg;
|
|
unsigned int halt_state;
|
|
int err;
|
|
|
|
err = chipio_read(codec, DSP_DBGCNTL_INST_OFFSET, &dbg_ctrl_reg);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
halt_state = (dbg_ctrl_reg & DSP_DBGCNTL_STATE_MASK) >>
|
|
DSP_DBGCNTL_STATE_LOBIT;
|
|
|
|
if (halt_state != 0) {
|
|
dbg_ctrl_reg &= ~((halt_state << DSP_DBGCNTL_SS_LOBIT) &
|
|
DSP_DBGCNTL_SS_MASK);
|
|
err = chipio_write(codec, DSP_DBGCNTL_INST_OFFSET,
|
|
dbg_ctrl_reg);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
dbg_ctrl_reg |= (halt_state << DSP_DBGCNTL_EXEC_LOBIT) &
|
|
DSP_DBGCNTL_EXEC_MASK;
|
|
err = chipio_write(codec, DSP_DBGCNTL_INST_OFFSET,
|
|
dbg_ctrl_reg);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Reset the DSP
|
|
*/
|
|
static int dsp_reset(struct hda_codec *codec)
|
|
{
|
|
unsigned int res;
|
|
int retry = 20;
|
|
|
|
codec_dbg(codec, "dsp_reset\n");
|
|
do {
|
|
res = dspio_send(codec, VENDOR_DSPIO_DSP_INIT, 0);
|
|
retry--;
|
|
} while (res == -EIO && retry);
|
|
|
|
if (!retry) {
|
|
codec_dbg(codec, "dsp_reset timeout\n");
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Convert chip address to DSP address
|
|
*/
|
|
static unsigned int dsp_chip_to_dsp_addx(unsigned int chip_addx,
|
|
bool *code, bool *yram)
|
|
{
|
|
*code = *yram = false;
|
|
|
|
if (UC_RANGE(chip_addx, 1)) {
|
|
*code = true;
|
|
return UC_OFF(chip_addx);
|
|
} else if (X_RANGE_ALL(chip_addx, 1)) {
|
|
return X_OFF(chip_addx);
|
|
} else if (Y_RANGE_ALL(chip_addx, 1)) {
|
|
*yram = true;
|
|
return Y_OFF(chip_addx);
|
|
}
|
|
|
|
return INVALID_CHIP_ADDRESS;
|
|
}
|
|
|
|
/*
|
|
* Check if the DSP DMA is active
|
|
*/
|
|
static bool dsp_is_dma_active(struct hda_codec *codec, unsigned int dma_chan)
|
|
{
|
|
unsigned int dma_chnlstart_reg;
|
|
|
|
chipio_read(codec, DSPDMAC_CHNLSTART_INST_OFFSET, &dma_chnlstart_reg);
|
|
|
|
return ((dma_chnlstart_reg & (1 <<
|
|
(DSPDMAC_CHNLSTART_EN_LOBIT + dma_chan))) != 0);
|
|
}
|
|
|
|
static int dsp_dma_setup_common(struct hda_codec *codec,
|
|
unsigned int chip_addx,
|
|
unsigned int dma_chan,
|
|
unsigned int port_map_mask,
|
|
bool ovly)
|
|
{
|
|
int status = 0;
|
|
unsigned int chnl_prop;
|
|
unsigned int dsp_addx;
|
|
unsigned int active;
|
|
bool code, yram;
|
|
|
|
codec_dbg(codec, "-- dsp_dma_setup_common() -- Begin ---------\n");
|
|
|
|
if (dma_chan >= DSPDMAC_DMA_CFG_CHANNEL_COUNT) {
|
|
codec_dbg(codec, "dma chan num invalid\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (dsp_is_dma_active(codec, dma_chan)) {
|
|
codec_dbg(codec, "dma already active\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
dsp_addx = dsp_chip_to_dsp_addx(chip_addx, &code, &yram);
|
|
|
|
if (dsp_addx == INVALID_CHIP_ADDRESS) {
|
|
codec_dbg(codec, "invalid chip addr\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
chnl_prop = DSPDMAC_CHNLPROP_AC_MASK;
|
|
active = 0;
|
|
|
|
codec_dbg(codec, " dsp_dma_setup_common() start reg pgm\n");
|
|
|
|
if (ovly) {
|
|
status = chipio_read(codec, DSPDMAC_CHNLPROP_INST_OFFSET,
|
|
&chnl_prop);
|
|
|
|
if (status < 0) {
|
|
codec_dbg(codec, "read CHNLPROP Reg fail\n");
|
|
return status;
|
|
}
|
|
codec_dbg(codec, "dsp_dma_setup_common() Read CHNLPROP\n");
|
|
}
|
|
|
|
if (!code)
|
|
chnl_prop &= ~(1 << (DSPDMAC_CHNLPROP_MSPCE_LOBIT + dma_chan));
|
|
else
|
|
chnl_prop |= (1 << (DSPDMAC_CHNLPROP_MSPCE_LOBIT + dma_chan));
|
|
|
|
chnl_prop &= ~(1 << (DSPDMAC_CHNLPROP_DCON_LOBIT + dma_chan));
|
|
|
|
status = chipio_write(codec, DSPDMAC_CHNLPROP_INST_OFFSET, chnl_prop);
|
|
if (status < 0) {
|
|
codec_dbg(codec, "write CHNLPROP Reg fail\n");
|
|
return status;
|
|
}
|
|
codec_dbg(codec, " dsp_dma_setup_common() Write CHNLPROP\n");
|
|
|
|
if (ovly) {
|
|
status = chipio_read(codec, DSPDMAC_ACTIVE_INST_OFFSET,
|
|
&active);
|
|
|
|
if (status < 0) {
|
|
codec_dbg(codec, "read ACTIVE Reg fail\n");
|
|
return status;
|
|
}
|
|
codec_dbg(codec, "dsp_dma_setup_common() Read ACTIVE\n");
|
|
}
|
|
|
|
active &= (~(1 << (DSPDMAC_ACTIVE_AAR_LOBIT + dma_chan))) &
|
|
DSPDMAC_ACTIVE_AAR_MASK;
|
|
|
|
status = chipio_write(codec, DSPDMAC_ACTIVE_INST_OFFSET, active);
|
|
if (status < 0) {
|
|
codec_dbg(codec, "write ACTIVE Reg fail\n");
|
|
return status;
|
|
}
|
|
|
|
codec_dbg(codec, " dsp_dma_setup_common() Write ACTIVE\n");
|
|
|
|
status = chipio_write(codec, DSPDMAC_AUDCHSEL_INST_OFFSET(dma_chan),
|
|
port_map_mask);
|
|
if (status < 0) {
|
|
codec_dbg(codec, "write AUDCHSEL Reg fail\n");
|
|
return status;
|
|
}
|
|
codec_dbg(codec, " dsp_dma_setup_common() Write AUDCHSEL\n");
|
|
|
|
status = chipio_write(codec, DSPDMAC_IRQCNT_INST_OFFSET(dma_chan),
|
|
DSPDMAC_IRQCNT_BICNT_MASK | DSPDMAC_IRQCNT_CICNT_MASK);
|
|
if (status < 0) {
|
|
codec_dbg(codec, "write IRQCNT Reg fail\n");
|
|
return status;
|
|
}
|
|
codec_dbg(codec, " dsp_dma_setup_common() Write IRQCNT\n");
|
|
|
|
codec_dbg(codec,
|
|
"ChipA=0x%x,DspA=0x%x,dmaCh=%u, "
|
|
"CHSEL=0x%x,CHPROP=0x%x,Active=0x%x\n",
|
|
chip_addx, dsp_addx, dma_chan,
|
|
port_map_mask, chnl_prop, active);
|
|
|
|
codec_dbg(codec, "-- dsp_dma_setup_common() -- Complete ------\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Setup the DSP DMA per-transfer-specific registers
|
|
*/
|
|
static int dsp_dma_setup(struct hda_codec *codec,
|
|
unsigned int chip_addx,
|
|
unsigned int count,
|
|
unsigned int dma_chan)
|
|
{
|
|
int status = 0;
|
|
bool code, yram;
|
|
unsigned int dsp_addx;
|
|
unsigned int addr_field;
|
|
unsigned int incr_field;
|
|
unsigned int base_cnt;
|
|
unsigned int cur_cnt;
|
|
unsigned int dma_cfg = 0;
|
|
unsigned int adr_ofs = 0;
|
|
unsigned int xfr_cnt = 0;
|
|
const unsigned int max_dma_count = 1 << (DSPDMAC_XFRCNT_BCNT_HIBIT -
|
|
DSPDMAC_XFRCNT_BCNT_LOBIT + 1);
|
|
|
|
codec_dbg(codec, "-- dsp_dma_setup() -- Begin ---------\n");
|
|
|
|
if (count > max_dma_count) {
|
|
codec_dbg(codec, "count too big\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dsp_addx = dsp_chip_to_dsp_addx(chip_addx, &code, &yram);
|
|
if (dsp_addx == INVALID_CHIP_ADDRESS) {
|
|
codec_dbg(codec, "invalid chip addr\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
codec_dbg(codec, " dsp_dma_setup() start reg pgm\n");
|
|
|
|
addr_field = dsp_addx << DSPDMAC_DMACFG_DBADR_LOBIT;
|
|
incr_field = 0;
|
|
|
|
if (!code) {
|
|
addr_field <<= 1;
|
|
if (yram)
|
|
addr_field |= (1 << DSPDMAC_DMACFG_DBADR_LOBIT);
|
|
|
|
incr_field = (1 << DSPDMAC_DMACFG_AINCR_LOBIT);
|
|
}
|
|
|
|
dma_cfg = addr_field + incr_field;
|
|
status = chipio_write(codec, DSPDMAC_DMACFG_INST_OFFSET(dma_chan),
|
|
dma_cfg);
|
|
if (status < 0) {
|
|
codec_dbg(codec, "write DMACFG Reg fail\n");
|
|
return status;
|
|
}
|
|
codec_dbg(codec, " dsp_dma_setup() Write DMACFG\n");
|
|
|
|
adr_ofs = (count - 1) << (DSPDMAC_DSPADROFS_BOFS_LOBIT +
|
|
(code ? 0 : 1));
|
|
|
|
status = chipio_write(codec, DSPDMAC_DSPADROFS_INST_OFFSET(dma_chan),
|
|
adr_ofs);
|
|
if (status < 0) {
|
|
codec_dbg(codec, "write DSPADROFS Reg fail\n");
|
|
return status;
|
|
}
|
|
codec_dbg(codec, " dsp_dma_setup() Write DSPADROFS\n");
|
|
|
|
base_cnt = (count - 1) << DSPDMAC_XFRCNT_BCNT_LOBIT;
|
|
|
|
cur_cnt = (count - 1) << DSPDMAC_XFRCNT_CCNT_LOBIT;
|
|
|
|
xfr_cnt = base_cnt | cur_cnt;
|
|
|
|
status = chipio_write(codec,
|
|
DSPDMAC_XFRCNT_INST_OFFSET(dma_chan), xfr_cnt);
|
|
if (status < 0) {
|
|
codec_dbg(codec, "write XFRCNT Reg fail\n");
|
|
return status;
|
|
}
|
|
codec_dbg(codec, " dsp_dma_setup() Write XFRCNT\n");
|
|
|
|
codec_dbg(codec,
|
|
"ChipA=0x%x, cnt=0x%x, DMACFG=0x%x, "
|
|
"ADROFS=0x%x, XFRCNT=0x%x\n",
|
|
chip_addx, count, dma_cfg, adr_ofs, xfr_cnt);
|
|
|
|
codec_dbg(codec, "-- dsp_dma_setup() -- Complete ---------\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Start the DSP DMA
|
|
*/
|
|
static int dsp_dma_start(struct hda_codec *codec,
|
|
unsigned int dma_chan, bool ovly)
|
|
{
|
|
unsigned int reg = 0;
|
|
int status = 0;
|
|
|
|
codec_dbg(codec, "-- dsp_dma_start() -- Begin ---------\n");
|
|
|
|
if (ovly) {
|
|
status = chipio_read(codec,
|
|
DSPDMAC_CHNLSTART_INST_OFFSET, ®);
|
|
|
|
if (status < 0) {
|
|
codec_dbg(codec, "read CHNLSTART reg fail\n");
|
|
return status;
|
|
}
|
|
codec_dbg(codec, "-- dsp_dma_start() Read CHNLSTART\n");
|
|
|
|
reg &= ~(DSPDMAC_CHNLSTART_EN_MASK |
|
|
DSPDMAC_CHNLSTART_DIS_MASK);
|
|
}
|
|
|
|
status = chipio_write(codec, DSPDMAC_CHNLSTART_INST_OFFSET,
|
|
reg | (1 << (dma_chan + DSPDMAC_CHNLSTART_EN_LOBIT)));
|
|
if (status < 0) {
|
|
codec_dbg(codec, "write CHNLSTART reg fail\n");
|
|
return status;
|
|
}
|
|
codec_dbg(codec, "-- dsp_dma_start() -- Complete ---------\n");
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* Stop the DSP DMA
|
|
*/
|
|
static int dsp_dma_stop(struct hda_codec *codec,
|
|
unsigned int dma_chan, bool ovly)
|
|
{
|
|
unsigned int reg = 0;
|
|
int status = 0;
|
|
|
|
codec_dbg(codec, "-- dsp_dma_stop() -- Begin ---------\n");
|
|
|
|
if (ovly) {
|
|
status = chipio_read(codec,
|
|
DSPDMAC_CHNLSTART_INST_OFFSET, ®);
|
|
|
|
if (status < 0) {
|
|
codec_dbg(codec, "read CHNLSTART reg fail\n");
|
|
return status;
|
|
}
|
|
codec_dbg(codec, "-- dsp_dma_stop() Read CHNLSTART\n");
|
|
reg &= ~(DSPDMAC_CHNLSTART_EN_MASK |
|
|
DSPDMAC_CHNLSTART_DIS_MASK);
|
|
}
|
|
|
|
status = chipio_write(codec, DSPDMAC_CHNLSTART_INST_OFFSET,
|
|
reg | (1 << (dma_chan + DSPDMAC_CHNLSTART_DIS_LOBIT)));
|
|
if (status < 0) {
|
|
codec_dbg(codec, "write CHNLSTART reg fail\n");
|
|
return status;
|
|
}
|
|
codec_dbg(codec, "-- dsp_dma_stop() -- Complete ---------\n");
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* Allocate router ports
|
|
*
|
|
* @codec: the HDA codec
|
|
* @num_chans: number of channels in the stream
|
|
* @ports_per_channel: number of ports per channel
|
|
* @start_device: start device
|
|
* @port_map: pointer to the port list to hold the allocated ports
|
|
*
|
|
* Returns zero or a negative error code.
|
|
*/
|
|
static int dsp_allocate_router_ports(struct hda_codec *codec,
|
|
unsigned int num_chans,
|
|
unsigned int ports_per_channel,
|
|
unsigned int start_device,
|
|
unsigned int *port_map)
|
|
{
|
|
int status = 0;
|
|
int res;
|
|
u8 val;
|
|
|
|
status = chipio_send(codec, VENDOR_CHIPIO_STATUS, 0);
|
|
if (status < 0)
|
|
return status;
|
|
|
|
val = start_device << 6;
|
|
val |= (ports_per_channel - 1) << 4;
|
|
val |= num_chans - 1;
|
|
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_PORT_ALLOC_CONFIG_SET,
|
|
val);
|
|
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_PORT_ALLOC_SET,
|
|
MEM_CONNID_DSP);
|
|
|
|
status = chipio_send(codec, VENDOR_CHIPIO_STATUS, 0);
|
|
if (status < 0)
|
|
return status;
|
|
|
|
res = snd_hda_codec_read(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_PORT_ALLOC_GET, 0);
|
|
|
|
*port_map = res;
|
|
|
|
return (res < 0) ? res : 0;
|
|
}
|
|
|
|
/*
|
|
* Free router ports
|
|
*/
|
|
static int dsp_free_router_ports(struct hda_codec *codec)
|
|
{
|
|
int status = 0;
|
|
|
|
status = chipio_send(codec, VENDOR_CHIPIO_STATUS, 0);
|
|
if (status < 0)
|
|
return status;
|
|
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_PORT_FREE_SET,
|
|
MEM_CONNID_DSP);
|
|
|
|
status = chipio_send(codec, VENDOR_CHIPIO_STATUS, 0);
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* Allocate DSP ports for the download stream
|
|
*/
|
|
static int dsp_allocate_ports(struct hda_codec *codec,
|
|
unsigned int num_chans,
|
|
unsigned int rate_multi, unsigned int *port_map)
|
|
{
|
|
int status;
|
|
|
|
codec_dbg(codec, " dsp_allocate_ports() -- begin\n");
|
|
|
|
if ((rate_multi != 1) && (rate_multi != 2) && (rate_multi != 4)) {
|
|
codec_dbg(codec, "bad rate multiple\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
status = dsp_allocate_router_ports(codec, num_chans,
|
|
rate_multi, 0, port_map);
|
|
|
|
codec_dbg(codec, " dsp_allocate_ports() -- complete\n");
|
|
|
|
return status;
|
|
}
|
|
|
|
static int dsp_allocate_ports_format(struct hda_codec *codec,
|
|
const unsigned short fmt,
|
|
unsigned int *port_map)
|
|
{
|
|
int status;
|
|
unsigned int num_chans;
|
|
|
|
unsigned int sample_rate_div = ((get_hdafmt_rate(fmt) >> 0) & 3) + 1;
|
|
unsigned int sample_rate_mul = ((get_hdafmt_rate(fmt) >> 3) & 3) + 1;
|
|
unsigned int rate_multi = sample_rate_mul / sample_rate_div;
|
|
|
|
if ((rate_multi != 1) && (rate_multi != 2) && (rate_multi != 4)) {
|
|
codec_dbg(codec, "bad rate multiple\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
num_chans = get_hdafmt_chs(fmt) + 1;
|
|
|
|
status = dsp_allocate_ports(codec, num_chans, rate_multi, port_map);
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* free DSP ports
|
|
*/
|
|
static int dsp_free_ports(struct hda_codec *codec)
|
|
{
|
|
int status;
|
|
|
|
codec_dbg(codec, " dsp_free_ports() -- begin\n");
|
|
|
|
status = dsp_free_router_ports(codec);
|
|
if (status < 0) {
|
|
codec_dbg(codec, "free router ports fail\n");
|
|
return status;
|
|
}
|
|
codec_dbg(codec, " dsp_free_ports() -- complete\n");
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* HDA DMA engine stuffs for DSP code download
|
|
*/
|
|
struct dma_engine {
|
|
struct hda_codec *codec;
|
|
unsigned short m_converter_format;
|
|
struct snd_dma_buffer *dmab;
|
|
unsigned int buf_size;
|
|
};
|
|
|
|
|
|
enum dma_state {
|
|
DMA_STATE_STOP = 0,
|
|
DMA_STATE_RUN = 1
|
|
};
|
|
|
|
static int dma_convert_to_hda_format(struct hda_codec *codec,
|
|
unsigned int sample_rate,
|
|
unsigned short channels,
|
|
unsigned short *hda_format)
|
|
{
|
|
unsigned int format_val;
|
|
|
|
format_val = snd_hdac_calc_stream_format(sample_rate,
|
|
channels, SNDRV_PCM_FORMAT_S32_LE, 32, 0);
|
|
|
|
if (hda_format)
|
|
*hda_format = (unsigned short)format_val;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Reset DMA for DSP download
|
|
*/
|
|
static int dma_reset(struct dma_engine *dma)
|
|
{
|
|
struct hda_codec *codec = dma->codec;
|
|
struct ca0132_spec *spec = codec->spec;
|
|
int status;
|
|
|
|
if (dma->dmab->area)
|
|
snd_hda_codec_load_dsp_cleanup(codec, dma->dmab);
|
|
|
|
status = snd_hda_codec_load_dsp_prepare(codec,
|
|
dma->m_converter_format,
|
|
dma->buf_size,
|
|
dma->dmab);
|
|
if (status < 0)
|
|
return status;
|
|
spec->dsp_stream_id = status;
|
|
return 0;
|
|
}
|
|
|
|
static int dma_set_state(struct dma_engine *dma, enum dma_state state)
|
|
{
|
|
bool cmd;
|
|
|
|
switch (state) {
|
|
case DMA_STATE_STOP:
|
|
cmd = false;
|
|
break;
|
|
case DMA_STATE_RUN:
|
|
cmd = true;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
snd_hda_codec_load_dsp_trigger(dma->codec, cmd);
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int dma_get_buffer_size(struct dma_engine *dma)
|
|
{
|
|
return dma->dmab->bytes;
|
|
}
|
|
|
|
static unsigned char *dma_get_buffer_addr(struct dma_engine *dma)
|
|
{
|
|
return dma->dmab->area;
|
|
}
|
|
|
|
static int dma_xfer(struct dma_engine *dma,
|
|
const unsigned int *data,
|
|
unsigned int count)
|
|
{
|
|
memcpy(dma->dmab->area, data, count);
|
|
return 0;
|
|
}
|
|
|
|
static void dma_get_converter_format(
|
|
struct dma_engine *dma,
|
|
unsigned short *format)
|
|
{
|
|
if (format)
|
|
*format = dma->m_converter_format;
|
|
}
|
|
|
|
static unsigned int dma_get_stream_id(struct dma_engine *dma)
|
|
{
|
|
struct ca0132_spec *spec = dma->codec->spec;
|
|
|
|
return spec->dsp_stream_id;
|
|
}
|
|
|
|
struct dsp_image_seg {
|
|
u32 magic;
|
|
u32 chip_addr;
|
|
u32 count;
|
|
u32 data[0];
|
|
};
|
|
|
|
static const u32 g_magic_value = 0x4c46584d;
|
|
static const u32 g_chip_addr_magic_value = 0xFFFFFF01;
|
|
|
|
static bool is_valid(const struct dsp_image_seg *p)
|
|
{
|
|
return p->magic == g_magic_value;
|
|
}
|
|
|
|
static bool is_hci_prog_list_seg(const struct dsp_image_seg *p)
|
|
{
|
|
return g_chip_addr_magic_value == p->chip_addr;
|
|
}
|
|
|
|
static bool is_last(const struct dsp_image_seg *p)
|
|
{
|
|
return p->count == 0;
|
|
}
|
|
|
|
static size_t dsp_sizeof(const struct dsp_image_seg *p)
|
|
{
|
|
return struct_size(p, data, p->count);
|
|
}
|
|
|
|
static const struct dsp_image_seg *get_next_seg_ptr(
|
|
const struct dsp_image_seg *p)
|
|
{
|
|
return (struct dsp_image_seg *)((unsigned char *)(p) + dsp_sizeof(p));
|
|
}
|
|
|
|
/*
|
|
* CA0132 chip DSP transfer stuffs. For DSP download.
|
|
*/
|
|
#define INVALID_DMA_CHANNEL (~0U)
|
|
|
|
/*
|
|
* Program a list of address/data pairs via the ChipIO widget.
|
|
* The segment data is in the format of successive pairs of words.
|
|
* These are repeated as indicated by the segment's count field.
|
|
*/
|
|
static int dspxfr_hci_write(struct hda_codec *codec,
|
|
const struct dsp_image_seg *fls)
|
|
{
|
|
int status;
|
|
const u32 *data;
|
|
unsigned int count;
|
|
|
|
if (fls == NULL || fls->chip_addr != g_chip_addr_magic_value) {
|
|
codec_dbg(codec, "hci_write invalid params\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
count = fls->count;
|
|
data = (u32 *)(fls->data);
|
|
while (count >= 2) {
|
|
status = chipio_write(codec, data[0], data[1]);
|
|
if (status < 0) {
|
|
codec_dbg(codec, "hci_write chipio failed\n");
|
|
return status;
|
|
}
|
|
count -= 2;
|
|
data += 2;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Write a block of data into DSP code or data RAM using pre-allocated
|
|
* DMA engine.
|
|
*
|
|
* @codec: the HDA codec
|
|
* @fls: pointer to a fast load image
|
|
* @reloc: Relocation address for loading single-segment overlays, or 0 for
|
|
* no relocation
|
|
* @dma_engine: pointer to DMA engine to be used for DSP download
|
|
* @dma_chan: The number of DMA channels used for DSP download
|
|
* @port_map_mask: port mapping
|
|
* @ovly: TRUE if overlay format is required
|
|
*
|
|
* Returns zero or a negative error code.
|
|
*/
|
|
static int dspxfr_one_seg(struct hda_codec *codec,
|
|
const struct dsp_image_seg *fls,
|
|
unsigned int reloc,
|
|
struct dma_engine *dma_engine,
|
|
unsigned int dma_chan,
|
|
unsigned int port_map_mask,
|
|
bool ovly)
|
|
{
|
|
int status = 0;
|
|
bool comm_dma_setup_done = false;
|
|
const unsigned int *data;
|
|
unsigned int chip_addx;
|
|
unsigned int words_to_write;
|
|
unsigned int buffer_size_words;
|
|
unsigned char *buffer_addx;
|
|
unsigned short hda_format;
|
|
unsigned int sample_rate_div;
|
|
unsigned int sample_rate_mul;
|
|
unsigned int num_chans;
|
|
unsigned int hda_frame_size_words;
|
|
unsigned int remainder_words;
|
|
const u32 *data_remainder;
|
|
u32 chip_addx_remainder;
|
|
unsigned int run_size_words;
|
|
const struct dsp_image_seg *hci_write = NULL;
|
|
unsigned long timeout;
|
|
bool dma_active;
|
|
|
|
if (fls == NULL)
|
|
return -EINVAL;
|
|
if (is_hci_prog_list_seg(fls)) {
|
|
hci_write = fls;
|
|
fls = get_next_seg_ptr(fls);
|
|
}
|
|
|
|
if (hci_write && (!fls || is_last(fls))) {
|
|
codec_dbg(codec, "hci_write\n");
|
|
return dspxfr_hci_write(codec, hci_write);
|
|
}
|
|
|
|
if (fls == NULL || dma_engine == NULL || port_map_mask == 0) {
|
|
codec_dbg(codec, "Invalid Params\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
data = fls->data;
|
|
chip_addx = fls->chip_addr,
|
|
words_to_write = fls->count;
|
|
|
|
if (!words_to_write)
|
|
return hci_write ? dspxfr_hci_write(codec, hci_write) : 0;
|
|
if (reloc)
|
|
chip_addx = (chip_addx & (0xFFFF0000 << 2)) + (reloc << 2);
|
|
|
|
if (!UC_RANGE(chip_addx, words_to_write) &&
|
|
!X_RANGE_ALL(chip_addx, words_to_write) &&
|
|
!Y_RANGE_ALL(chip_addx, words_to_write)) {
|
|
codec_dbg(codec, "Invalid chip_addx Params\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
buffer_size_words = (unsigned int)dma_get_buffer_size(dma_engine) /
|
|
sizeof(u32);
|
|
|
|
buffer_addx = dma_get_buffer_addr(dma_engine);
|
|
|
|
if (buffer_addx == NULL) {
|
|
codec_dbg(codec, "dma_engine buffer NULL\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dma_get_converter_format(dma_engine, &hda_format);
|
|
sample_rate_div = ((get_hdafmt_rate(hda_format) >> 0) & 3) + 1;
|
|
sample_rate_mul = ((get_hdafmt_rate(hda_format) >> 3) & 3) + 1;
|
|
num_chans = get_hdafmt_chs(hda_format) + 1;
|
|
|
|
hda_frame_size_words = ((sample_rate_div == 0) ? 0 :
|
|
(num_chans * sample_rate_mul / sample_rate_div));
|
|
|
|
if (hda_frame_size_words == 0) {
|
|
codec_dbg(codec, "frmsz zero\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
buffer_size_words = min(buffer_size_words,
|
|
(unsigned int)(UC_RANGE(chip_addx, 1) ?
|
|
65536 : 32768));
|
|
buffer_size_words -= buffer_size_words % hda_frame_size_words;
|
|
codec_dbg(codec,
|
|
"chpadr=0x%08x frmsz=%u nchan=%u "
|
|
"rate_mul=%u div=%u bufsz=%u\n",
|
|
chip_addx, hda_frame_size_words, num_chans,
|
|
sample_rate_mul, sample_rate_div, buffer_size_words);
|
|
|
|
if (buffer_size_words < hda_frame_size_words) {
|
|
codec_dbg(codec, "dspxfr_one_seg:failed\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
remainder_words = words_to_write % hda_frame_size_words;
|
|
data_remainder = data;
|
|
chip_addx_remainder = chip_addx;
|
|
|
|
data += remainder_words;
|
|
chip_addx += remainder_words*sizeof(u32);
|
|
words_to_write -= remainder_words;
|
|
|
|
while (words_to_write != 0) {
|
|
run_size_words = min(buffer_size_words, words_to_write);
|
|
codec_dbg(codec, "dspxfr (seg loop)cnt=%u rs=%u remainder=%u\n",
|
|
words_to_write, run_size_words, remainder_words);
|
|
dma_xfer(dma_engine, data, run_size_words*sizeof(u32));
|
|
if (!comm_dma_setup_done) {
|
|
status = dsp_dma_stop(codec, dma_chan, ovly);
|
|
if (status < 0)
|
|
return status;
|
|
status = dsp_dma_setup_common(codec, chip_addx,
|
|
dma_chan, port_map_mask, ovly);
|
|
if (status < 0)
|
|
return status;
|
|
comm_dma_setup_done = true;
|
|
}
|
|
|
|
status = dsp_dma_setup(codec, chip_addx,
|
|
run_size_words, dma_chan);
|
|
if (status < 0)
|
|
return status;
|
|
status = dsp_dma_start(codec, dma_chan, ovly);
|
|
if (status < 0)
|
|
return status;
|
|
if (!dsp_is_dma_active(codec, dma_chan)) {
|
|
codec_dbg(codec, "dspxfr:DMA did not start\n");
|
|
return -EIO;
|
|
}
|
|
status = dma_set_state(dma_engine, DMA_STATE_RUN);
|
|
if (status < 0)
|
|
return status;
|
|
if (remainder_words != 0) {
|
|
status = chipio_write_multiple(codec,
|
|
chip_addx_remainder,
|
|
data_remainder,
|
|
remainder_words);
|
|
if (status < 0)
|
|
return status;
|
|
remainder_words = 0;
|
|
}
|
|
if (hci_write) {
|
|
status = dspxfr_hci_write(codec, hci_write);
|
|
if (status < 0)
|
|
return status;
|
|
hci_write = NULL;
|
|
}
|
|
|
|
timeout = jiffies + msecs_to_jiffies(2000);
|
|
do {
|
|
dma_active = dsp_is_dma_active(codec, dma_chan);
|
|
if (!dma_active)
|
|
break;
|
|
msleep(20);
|
|
} while (time_before(jiffies, timeout));
|
|
if (dma_active)
|
|
break;
|
|
|
|
codec_dbg(codec, "+++++ DMA complete\n");
|
|
dma_set_state(dma_engine, DMA_STATE_STOP);
|
|
status = dma_reset(dma_engine);
|
|
|
|
if (status < 0)
|
|
return status;
|
|
|
|
data += run_size_words;
|
|
chip_addx += run_size_words*sizeof(u32);
|
|
words_to_write -= run_size_words;
|
|
}
|
|
|
|
if (remainder_words != 0) {
|
|
status = chipio_write_multiple(codec, chip_addx_remainder,
|
|
data_remainder, remainder_words);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* Write the entire DSP image of a DSP code/data overlay to DSP memories
|
|
*
|
|
* @codec: the HDA codec
|
|
* @fls_data: pointer to a fast load image
|
|
* @reloc: Relocation address for loading single-segment overlays, or 0 for
|
|
* no relocation
|
|
* @sample_rate: sampling rate of the stream used for DSP download
|
|
* @channels: channels of the stream used for DSP download
|
|
* @ovly: TRUE if overlay format is required
|
|
*
|
|
* Returns zero or a negative error code.
|
|
*/
|
|
static int dspxfr_image(struct hda_codec *codec,
|
|
const struct dsp_image_seg *fls_data,
|
|
unsigned int reloc,
|
|
unsigned int sample_rate,
|
|
unsigned short channels,
|
|
bool ovly)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
int status;
|
|
unsigned short hda_format = 0;
|
|
unsigned int response;
|
|
unsigned char stream_id = 0;
|
|
struct dma_engine *dma_engine;
|
|
unsigned int dma_chan;
|
|
unsigned int port_map_mask;
|
|
|
|
if (fls_data == NULL)
|
|
return -EINVAL;
|
|
|
|
dma_engine = kzalloc(sizeof(*dma_engine), GFP_KERNEL);
|
|
if (!dma_engine)
|
|
return -ENOMEM;
|
|
|
|
dma_engine->dmab = kzalloc(sizeof(*dma_engine->dmab), GFP_KERNEL);
|
|
if (!dma_engine->dmab) {
|
|
kfree(dma_engine);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dma_engine->codec = codec;
|
|
dma_convert_to_hda_format(codec, sample_rate, channels, &hda_format);
|
|
dma_engine->m_converter_format = hda_format;
|
|
dma_engine->buf_size = (ovly ? DSP_DMA_WRITE_BUFLEN_OVLY :
|
|
DSP_DMA_WRITE_BUFLEN_INIT) * 2;
|
|
|
|
dma_chan = ovly ? INVALID_DMA_CHANNEL : 0;
|
|
|
|
status = codec_set_converter_format(codec, WIDGET_CHIP_CTRL,
|
|
hda_format, &response);
|
|
|
|
if (status < 0) {
|
|
codec_dbg(codec, "set converter format fail\n");
|
|
goto exit;
|
|
}
|
|
|
|
status = snd_hda_codec_load_dsp_prepare(codec,
|
|
dma_engine->m_converter_format,
|
|
dma_engine->buf_size,
|
|
dma_engine->dmab);
|
|
if (status < 0)
|
|
goto exit;
|
|
spec->dsp_stream_id = status;
|
|
|
|
if (ovly) {
|
|
status = dspio_alloc_dma_chan(codec, &dma_chan);
|
|
if (status < 0) {
|
|
codec_dbg(codec, "alloc dmachan fail\n");
|
|
dma_chan = INVALID_DMA_CHANNEL;
|
|
goto exit;
|
|
}
|
|
}
|
|
|
|
port_map_mask = 0;
|
|
status = dsp_allocate_ports_format(codec, hda_format,
|
|
&port_map_mask);
|
|
if (status < 0) {
|
|
codec_dbg(codec, "alloc ports fail\n");
|
|
goto exit;
|
|
}
|
|
|
|
stream_id = dma_get_stream_id(dma_engine);
|
|
status = codec_set_converter_stream_channel(codec,
|
|
WIDGET_CHIP_CTRL, stream_id, 0, &response);
|
|
if (status < 0) {
|
|
codec_dbg(codec, "set stream chan fail\n");
|
|
goto exit;
|
|
}
|
|
|
|
while ((fls_data != NULL) && !is_last(fls_data)) {
|
|
if (!is_valid(fls_data)) {
|
|
codec_dbg(codec, "FLS check fail\n");
|
|
status = -EINVAL;
|
|
goto exit;
|
|
}
|
|
status = dspxfr_one_seg(codec, fls_data, reloc,
|
|
dma_engine, dma_chan,
|
|
port_map_mask, ovly);
|
|
if (status < 0)
|
|
break;
|
|
|
|
if (is_hci_prog_list_seg(fls_data))
|
|
fls_data = get_next_seg_ptr(fls_data);
|
|
|
|
if ((fls_data != NULL) && !is_last(fls_data))
|
|
fls_data = get_next_seg_ptr(fls_data);
|
|
}
|
|
|
|
if (port_map_mask != 0)
|
|
status = dsp_free_ports(codec);
|
|
|
|
if (status < 0)
|
|
goto exit;
|
|
|
|
status = codec_set_converter_stream_channel(codec,
|
|
WIDGET_CHIP_CTRL, 0, 0, &response);
|
|
|
|
exit:
|
|
if (ovly && (dma_chan != INVALID_DMA_CHANNEL))
|
|
dspio_free_dma_chan(codec, dma_chan);
|
|
|
|
if (dma_engine->dmab->area)
|
|
snd_hda_codec_load_dsp_cleanup(codec, dma_engine->dmab);
|
|
kfree(dma_engine->dmab);
|
|
kfree(dma_engine);
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* CA0132 DSP download stuffs.
|
|
*/
|
|
static void dspload_post_setup(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
codec_dbg(codec, "---- dspload_post_setup ------\n");
|
|
if (!ca0132_use_alt_functions(spec)) {
|
|
/*set DSP speaker to 2.0 configuration*/
|
|
chipio_write(codec, XRAM_XRAM_INST_OFFSET(0x18), 0x08080080);
|
|
chipio_write(codec, XRAM_XRAM_INST_OFFSET(0x19), 0x3f800000);
|
|
|
|
/*update write pointer*/
|
|
chipio_write(codec, XRAM_XRAM_INST_OFFSET(0x29), 0x00000002);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* dspload_image - Download DSP from a DSP Image Fast Load structure.
|
|
*
|
|
* @codec: the HDA codec
|
|
* @fls: pointer to a fast load image
|
|
* @ovly: TRUE if overlay format is required
|
|
* @reloc: Relocation address for loading single-segment overlays, or 0 for
|
|
* no relocation
|
|
* @autostart: TRUE if DSP starts after loading; ignored if ovly is TRUE
|
|
* @router_chans: number of audio router channels to be allocated (0 means use
|
|
* internal defaults; max is 32)
|
|
*
|
|
* Download DSP from a DSP Image Fast Load structure. This structure is a
|
|
* linear, non-constant sized element array of structures, each of which
|
|
* contain the count of the data to be loaded, the data itself, and the
|
|
* corresponding starting chip address of the starting data location.
|
|
* Returns zero or a negative error code.
|
|
*/
|
|
static int dspload_image(struct hda_codec *codec,
|
|
const struct dsp_image_seg *fls,
|
|
bool ovly,
|
|
unsigned int reloc,
|
|
bool autostart,
|
|
int router_chans)
|
|
{
|
|
int status = 0;
|
|
unsigned int sample_rate;
|
|
unsigned short channels;
|
|
|
|
codec_dbg(codec, "---- dspload_image begin ------\n");
|
|
if (router_chans == 0) {
|
|
if (!ovly)
|
|
router_chans = DMA_TRANSFER_FRAME_SIZE_NWORDS;
|
|
else
|
|
router_chans = DMA_OVERLAY_FRAME_SIZE_NWORDS;
|
|
}
|
|
|
|
sample_rate = 48000;
|
|
channels = (unsigned short)router_chans;
|
|
|
|
while (channels > 16) {
|
|
sample_rate *= 2;
|
|
channels /= 2;
|
|
}
|
|
|
|
do {
|
|
codec_dbg(codec, "Ready to program DMA\n");
|
|
if (!ovly)
|
|
status = dsp_reset(codec);
|
|
|
|
if (status < 0)
|
|
break;
|
|
|
|
codec_dbg(codec, "dsp_reset() complete\n");
|
|
status = dspxfr_image(codec, fls, reloc, sample_rate, channels,
|
|
ovly);
|
|
|
|
if (status < 0)
|
|
break;
|
|
|
|
codec_dbg(codec, "dspxfr_image() complete\n");
|
|
if (autostart && !ovly) {
|
|
dspload_post_setup(codec);
|
|
status = dsp_set_run_state(codec);
|
|
}
|
|
|
|
codec_dbg(codec, "LOAD FINISHED\n");
|
|
} while (0);
|
|
|
|
return status;
|
|
}
|
|
|
|
#ifdef CONFIG_SND_HDA_CODEC_CA0132_DSP
|
|
static bool dspload_is_loaded(struct hda_codec *codec)
|
|
{
|
|
unsigned int data = 0;
|
|
int status = 0;
|
|
|
|
status = chipio_read(codec, 0x40004, &data);
|
|
if ((status < 0) || (data != 1))
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
#else
|
|
#define dspload_is_loaded(codec) false
|
|
#endif
|
|
|
|
static bool dspload_wait_loaded(struct hda_codec *codec)
|
|
{
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(2000);
|
|
|
|
do {
|
|
if (dspload_is_loaded(codec)) {
|
|
codec_info(codec, "ca0132 DSP downloaded and running\n");
|
|
return true;
|
|
}
|
|
msleep(20);
|
|
} while (time_before(jiffies, timeout));
|
|
|
|
codec_err(codec, "ca0132 failed to download DSP\n");
|
|
return false;
|
|
}
|
|
|
|
/*
|
|
* ca0113 related functions. The ca0113 acts as the HDA bus for the pci-e
|
|
* based cards, and has a second mmio region, region2, that's used for special
|
|
* commands.
|
|
*/
|
|
|
|
/*
|
|
* For cards with PCI-E region2 (Sound Blaster Z/ZxR, Recon3D, and AE-5)
|
|
* the mmio address 0x320 is used to set GPIO pins. The format for the data
|
|
* The first eight bits are just the number of the pin. So far, I've only seen
|
|
* this number go to 7.
|
|
* AE-5 note: The AE-5 seems to use pins 2 and 3 to somehow set the color value
|
|
* of the on-card LED. It seems to use pin 2 for data, then toggles 3 to on and
|
|
* then off to send that bit.
|
|
*/
|
|
static void ca0113_mmio_gpio_set(struct hda_codec *codec, unsigned int gpio_pin,
|
|
bool enable)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
unsigned short gpio_data;
|
|
|
|
gpio_data = gpio_pin & 0xF;
|
|
gpio_data |= ((enable << 8) & 0x100);
|
|
|
|
writew(gpio_data, spec->mem_base + 0x320);
|
|
}
|
|
|
|
/*
|
|
* Special pci region2 commands that are only used by the AE-5. They follow
|
|
* a set format, and require reads at certain points to seemingly 'clear'
|
|
* the response data. My first tests didn't do these reads, and would cause
|
|
* the card to get locked up until the memory was read. These commands
|
|
* seem to work with three distinct values that I've taken to calling group,
|
|
* target-id, and value.
|
|
*/
|
|
static void ca0113_mmio_command_set(struct hda_codec *codec, unsigned int group,
|
|
unsigned int target, unsigned int value)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
unsigned int write_val;
|
|
|
|
writel(0x0000007e, spec->mem_base + 0x210);
|
|
readl(spec->mem_base + 0x210);
|
|
writel(0x0000005a, spec->mem_base + 0x210);
|
|
readl(spec->mem_base + 0x210);
|
|
readl(spec->mem_base + 0x210);
|
|
|
|
writel(0x00800005, spec->mem_base + 0x20c);
|
|
writel(group, spec->mem_base + 0x804);
|
|
|
|
writel(0x00800005, spec->mem_base + 0x20c);
|
|
write_val = (target & 0xff);
|
|
write_val |= (value << 8);
|
|
|
|
|
|
writel(write_val, spec->mem_base + 0x204);
|
|
/*
|
|
* Need delay here or else it goes too fast and works inconsistently.
|
|
*/
|
|
msleep(20);
|
|
|
|
readl(spec->mem_base + 0x860);
|
|
readl(spec->mem_base + 0x854);
|
|
readl(spec->mem_base + 0x840);
|
|
|
|
writel(0x00800004, spec->mem_base + 0x20c);
|
|
writel(0x00000000, spec->mem_base + 0x210);
|
|
readl(spec->mem_base + 0x210);
|
|
readl(spec->mem_base + 0x210);
|
|
}
|
|
|
|
/*
|
|
* This second type of command is used for setting the sound filter type.
|
|
*/
|
|
static void ca0113_mmio_command_set_type2(struct hda_codec *codec,
|
|
unsigned int group, unsigned int target, unsigned int value)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
unsigned int write_val;
|
|
|
|
writel(0x0000007e, spec->mem_base + 0x210);
|
|
readl(spec->mem_base + 0x210);
|
|
writel(0x0000005a, spec->mem_base + 0x210);
|
|
readl(spec->mem_base + 0x210);
|
|
readl(spec->mem_base + 0x210);
|
|
|
|
writel(0x00800003, spec->mem_base + 0x20c);
|
|
writel(group, spec->mem_base + 0x804);
|
|
|
|
writel(0x00800005, spec->mem_base + 0x20c);
|
|
write_val = (target & 0xff);
|
|
write_val |= (value << 8);
|
|
|
|
|
|
writel(write_val, spec->mem_base + 0x204);
|
|
msleep(20);
|
|
readl(spec->mem_base + 0x860);
|
|
readl(spec->mem_base + 0x854);
|
|
readl(spec->mem_base + 0x840);
|
|
|
|
writel(0x00800004, spec->mem_base + 0x20c);
|
|
writel(0x00000000, spec->mem_base + 0x210);
|
|
readl(spec->mem_base + 0x210);
|
|
readl(spec->mem_base + 0x210);
|
|
}
|
|
|
|
/*
|
|
* Setup GPIO for the other variants of Core3D.
|
|
*/
|
|
|
|
/*
|
|
* Sets up the GPIO pins so that they are discoverable. If this isn't done,
|
|
* the card shows as having no GPIO pins.
|
|
*/
|
|
static void ca0132_gpio_init(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
switch (ca0132_quirk(spec)) {
|
|
case QUIRK_SBZ:
|
|
case QUIRK_AE5:
|
|
snd_hda_codec_write(codec, 0x01, 0, 0x793, 0x00);
|
|
snd_hda_codec_write(codec, 0x01, 0, 0x794, 0x53);
|
|
snd_hda_codec_write(codec, 0x01, 0, 0x790, 0x23);
|
|
break;
|
|
case QUIRK_R3DI:
|
|
snd_hda_codec_write(codec, 0x01, 0, 0x793, 0x00);
|
|
snd_hda_codec_write(codec, 0x01, 0, 0x794, 0x5B);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
}
|
|
|
|
/* Sets the GPIO for audio output. */
|
|
static void ca0132_gpio_setup(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
switch (ca0132_quirk(spec)) {
|
|
case QUIRK_SBZ:
|
|
snd_hda_codec_write(codec, 0x01, 0,
|
|
AC_VERB_SET_GPIO_DIRECTION, 0x07);
|
|
snd_hda_codec_write(codec, 0x01, 0,
|
|
AC_VERB_SET_GPIO_MASK, 0x07);
|
|
snd_hda_codec_write(codec, 0x01, 0,
|
|
AC_VERB_SET_GPIO_DATA, 0x04);
|
|
snd_hda_codec_write(codec, 0x01, 0,
|
|
AC_VERB_SET_GPIO_DATA, 0x06);
|
|
break;
|
|
case QUIRK_R3DI:
|
|
snd_hda_codec_write(codec, 0x01, 0,
|
|
AC_VERB_SET_GPIO_DIRECTION, 0x1E);
|
|
snd_hda_codec_write(codec, 0x01, 0,
|
|
AC_VERB_SET_GPIO_MASK, 0x1F);
|
|
snd_hda_codec_write(codec, 0x01, 0,
|
|
AC_VERB_SET_GPIO_DATA, 0x0C);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* GPIO control functions for the Recon3D integrated.
|
|
*/
|
|
|
|
enum r3di_gpio_bit {
|
|
/* Bit 1 - Switch between front/rear mic. 0 = rear, 1 = front */
|
|
R3DI_MIC_SELECT_BIT = 1,
|
|
/* Bit 2 - Switch between headphone/line out. 0 = Headphone, 1 = Line */
|
|
R3DI_OUT_SELECT_BIT = 2,
|
|
/*
|
|
* I dunno what this actually does, but it stays on until the dsp
|
|
* is downloaded.
|
|
*/
|
|
R3DI_GPIO_DSP_DOWNLOADING = 3,
|
|
/*
|
|
* Same as above, no clue what it does, but it comes on after the dsp
|
|
* is downloaded.
|
|
*/
|
|
R3DI_GPIO_DSP_DOWNLOADED = 4
|
|
};
|
|
|
|
enum r3di_mic_select {
|
|
/* Set GPIO bit 1 to 0 for rear mic */
|
|
R3DI_REAR_MIC = 0,
|
|
/* Set GPIO bit 1 to 1 for front microphone*/
|
|
R3DI_FRONT_MIC = 1
|
|
};
|
|
|
|
enum r3di_out_select {
|
|
/* Set GPIO bit 2 to 0 for headphone */
|
|
R3DI_HEADPHONE_OUT = 0,
|
|
/* Set GPIO bit 2 to 1 for speaker */
|
|
R3DI_LINE_OUT = 1
|
|
};
|
|
enum r3di_dsp_status {
|
|
/* Set GPIO bit 3 to 1 until DSP is downloaded */
|
|
R3DI_DSP_DOWNLOADING = 0,
|
|
/* Set GPIO bit 4 to 1 once DSP is downloaded */
|
|
R3DI_DSP_DOWNLOADED = 1
|
|
};
|
|
|
|
|
|
static void r3di_gpio_mic_set(struct hda_codec *codec,
|
|
enum r3di_mic_select cur_mic)
|
|
{
|
|
unsigned int cur_gpio;
|
|
|
|
/* Get the current GPIO Data setup */
|
|
cur_gpio = snd_hda_codec_read(codec, 0x01, 0, AC_VERB_GET_GPIO_DATA, 0);
|
|
|
|
switch (cur_mic) {
|
|
case R3DI_REAR_MIC:
|
|
cur_gpio &= ~(1 << R3DI_MIC_SELECT_BIT);
|
|
break;
|
|
case R3DI_FRONT_MIC:
|
|
cur_gpio |= (1 << R3DI_MIC_SELECT_BIT);
|
|
break;
|
|
}
|
|
snd_hda_codec_write(codec, codec->core.afg, 0,
|
|
AC_VERB_SET_GPIO_DATA, cur_gpio);
|
|
}
|
|
|
|
static void r3di_gpio_out_set(struct hda_codec *codec,
|
|
enum r3di_out_select cur_out)
|
|
{
|
|
unsigned int cur_gpio;
|
|
|
|
/* Get the current GPIO Data setup */
|
|
cur_gpio = snd_hda_codec_read(codec, 0x01, 0, AC_VERB_GET_GPIO_DATA, 0);
|
|
|
|
switch (cur_out) {
|
|
case R3DI_HEADPHONE_OUT:
|
|
cur_gpio &= ~(1 << R3DI_OUT_SELECT_BIT);
|
|
break;
|
|
case R3DI_LINE_OUT:
|
|
cur_gpio |= (1 << R3DI_OUT_SELECT_BIT);
|
|
break;
|
|
}
|
|
snd_hda_codec_write(codec, codec->core.afg, 0,
|
|
AC_VERB_SET_GPIO_DATA, cur_gpio);
|
|
}
|
|
|
|
static void r3di_gpio_dsp_status_set(struct hda_codec *codec,
|
|
enum r3di_dsp_status dsp_status)
|
|
{
|
|
unsigned int cur_gpio;
|
|
|
|
/* Get the current GPIO Data setup */
|
|
cur_gpio = snd_hda_codec_read(codec, 0x01, 0, AC_VERB_GET_GPIO_DATA, 0);
|
|
|
|
switch (dsp_status) {
|
|
case R3DI_DSP_DOWNLOADING:
|
|
cur_gpio |= (1 << R3DI_GPIO_DSP_DOWNLOADING);
|
|
snd_hda_codec_write(codec, codec->core.afg, 0,
|
|
AC_VERB_SET_GPIO_DATA, cur_gpio);
|
|
break;
|
|
case R3DI_DSP_DOWNLOADED:
|
|
/* Set DOWNLOADING bit to 0. */
|
|
cur_gpio &= ~(1 << R3DI_GPIO_DSP_DOWNLOADING);
|
|
|
|
snd_hda_codec_write(codec, codec->core.afg, 0,
|
|
AC_VERB_SET_GPIO_DATA, cur_gpio);
|
|
|
|
cur_gpio |= (1 << R3DI_GPIO_DSP_DOWNLOADED);
|
|
break;
|
|
}
|
|
|
|
snd_hda_codec_write(codec, codec->core.afg, 0,
|
|
AC_VERB_SET_GPIO_DATA, cur_gpio);
|
|
}
|
|
|
|
/*
|
|
* PCM callbacks
|
|
*/
|
|
static int ca0132_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
|
|
struct hda_codec *codec,
|
|
unsigned int stream_tag,
|
|
unsigned int format,
|
|
struct snd_pcm_substream *substream)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
snd_hda_codec_setup_stream(codec, spec->dacs[0], stream_tag, 0, format);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ca0132_playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
|
|
struct hda_codec *codec,
|
|
struct snd_pcm_substream *substream)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
if (spec->dsp_state == DSP_DOWNLOADING)
|
|
return 0;
|
|
|
|
/*If Playback effects are on, allow stream some time to flush
|
|
*effects tail*/
|
|
if (spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID])
|
|
msleep(50);
|
|
|
|
snd_hda_codec_cleanup_stream(codec, spec->dacs[0]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int ca0132_playback_pcm_delay(struct hda_pcm_stream *info,
|
|
struct hda_codec *codec,
|
|
struct snd_pcm_substream *substream)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
unsigned int latency = DSP_PLAYBACK_INIT_LATENCY;
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
|
|
|
if (spec->dsp_state != DSP_DOWNLOADED)
|
|
return 0;
|
|
|
|
/* Add latency if playback enhancement and either effect is enabled. */
|
|
if (spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID]) {
|
|
if ((spec->effects_switch[SURROUND - EFFECT_START_NID]) ||
|
|
(spec->effects_switch[DIALOG_PLUS - EFFECT_START_NID]))
|
|
latency += DSP_PLAY_ENHANCEMENT_LATENCY;
|
|
}
|
|
|
|
/* Applying Speaker EQ adds latency as well. */
|
|
if (spec->cur_out_type == SPEAKER_OUT)
|
|
latency += DSP_SPEAKER_OUT_LATENCY;
|
|
|
|
return (latency * runtime->rate) / 1000;
|
|
}
|
|
|
|
/*
|
|
* Digital out
|
|
*/
|
|
static int ca0132_dig_playback_pcm_open(struct hda_pcm_stream *hinfo,
|
|
struct hda_codec *codec,
|
|
struct snd_pcm_substream *substream)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
return snd_hda_multi_out_dig_open(codec, &spec->multiout);
|
|
}
|
|
|
|
static int ca0132_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
|
|
struct hda_codec *codec,
|
|
unsigned int stream_tag,
|
|
unsigned int format,
|
|
struct snd_pcm_substream *substream)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
return snd_hda_multi_out_dig_prepare(codec, &spec->multiout,
|
|
stream_tag, format, substream);
|
|
}
|
|
|
|
static int ca0132_dig_playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
|
|
struct hda_codec *codec,
|
|
struct snd_pcm_substream *substream)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
return snd_hda_multi_out_dig_cleanup(codec, &spec->multiout);
|
|
}
|
|
|
|
static int ca0132_dig_playback_pcm_close(struct hda_pcm_stream *hinfo,
|
|
struct hda_codec *codec,
|
|
struct snd_pcm_substream *substream)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
return snd_hda_multi_out_dig_close(codec, &spec->multiout);
|
|
}
|
|
|
|
/*
|
|
* Analog capture
|
|
*/
|
|
static int ca0132_capture_pcm_prepare(struct hda_pcm_stream *hinfo,
|
|
struct hda_codec *codec,
|
|
unsigned int stream_tag,
|
|
unsigned int format,
|
|
struct snd_pcm_substream *substream)
|
|
{
|
|
snd_hda_codec_setup_stream(codec, hinfo->nid,
|
|
stream_tag, 0, format);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ca0132_capture_pcm_cleanup(struct hda_pcm_stream *hinfo,
|
|
struct hda_codec *codec,
|
|
struct snd_pcm_substream *substream)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
if (spec->dsp_state == DSP_DOWNLOADING)
|
|
return 0;
|
|
|
|
snd_hda_codec_cleanup_stream(codec, hinfo->nid);
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int ca0132_capture_pcm_delay(struct hda_pcm_stream *info,
|
|
struct hda_codec *codec,
|
|
struct snd_pcm_substream *substream)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
unsigned int latency = DSP_CAPTURE_INIT_LATENCY;
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
|
|
|
if (spec->dsp_state != DSP_DOWNLOADED)
|
|
return 0;
|
|
|
|
if (spec->effects_switch[CRYSTAL_VOICE - EFFECT_START_NID])
|
|
latency += DSP_CRYSTAL_VOICE_LATENCY;
|
|
|
|
return (latency * runtime->rate) / 1000;
|
|
}
|
|
|
|
/*
|
|
* Controls stuffs.
|
|
*/
|
|
|
|
/*
|
|
* Mixer controls helpers.
|
|
*/
|
|
#define CA0132_CODEC_VOL_MONO(xname, nid, channel, dir) \
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
|
|
.name = xname, \
|
|
.subdevice = HDA_SUBDEV_AMP_FLAG, \
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \
|
|
SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
|
|
SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK, \
|
|
.info = ca0132_volume_info, \
|
|
.get = ca0132_volume_get, \
|
|
.put = ca0132_volume_put, \
|
|
.tlv = { .c = ca0132_volume_tlv }, \
|
|
.private_value = HDA_COMPOSE_AMP_VAL(nid, channel, 0, dir) }
|
|
|
|
/*
|
|
* Creates a mixer control that uses defaults of HDA_CODEC_VOL except for the
|
|
* volume put, which is used for setting the DSP volume. This was done because
|
|
* the ca0132 functions were taking too much time and causing lag.
|
|
*/
|
|
#define CA0132_ALT_CODEC_VOL_MONO(xname, nid, channel, dir) \
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
|
|
.name = xname, \
|
|
.subdevice = HDA_SUBDEV_AMP_FLAG, \
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \
|
|
SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
|
|
SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK, \
|
|
.info = snd_hda_mixer_amp_volume_info, \
|
|
.get = snd_hda_mixer_amp_volume_get, \
|
|
.put = ca0132_alt_volume_put, \
|
|
.tlv = { .c = snd_hda_mixer_amp_tlv }, \
|
|
.private_value = HDA_COMPOSE_AMP_VAL(nid, channel, 0, dir) }
|
|
|
|
#define CA0132_CODEC_MUTE_MONO(xname, nid, channel, dir) \
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
|
|
.name = xname, \
|
|
.subdevice = HDA_SUBDEV_AMP_FLAG, \
|
|
.info = snd_hda_mixer_amp_switch_info, \
|
|
.get = ca0132_switch_get, \
|
|
.put = ca0132_switch_put, \
|
|
.private_value = HDA_COMPOSE_AMP_VAL(nid, channel, 0, dir) }
|
|
|
|
/* stereo */
|
|
#define CA0132_CODEC_VOL(xname, nid, dir) \
|
|
CA0132_CODEC_VOL_MONO(xname, nid, 3, dir)
|
|
#define CA0132_ALT_CODEC_VOL(xname, nid, dir) \
|
|
CA0132_ALT_CODEC_VOL_MONO(xname, nid, 3, dir)
|
|
#define CA0132_CODEC_MUTE(xname, nid, dir) \
|
|
CA0132_CODEC_MUTE_MONO(xname, nid, 3, dir)
|
|
|
|
/* lookup tables */
|
|
/*
|
|
* Lookup table with decibel values for the DSP. When volume is changed in
|
|
* Windows, the DSP is also sent the dB value in floating point. In Windows,
|
|
* these values have decimal points, probably because the Windows driver
|
|
* actually uses floating point. We can't here, so I made a lookup table of
|
|
* values -90 to 9. -90 is the lowest decibel value for both the ADC's and the
|
|
* DAC's, and 9 is the maximum.
|
|
*/
|
|
static const unsigned int float_vol_db_lookup[] = {
|
|
0xC2B40000, 0xC2B20000, 0xC2B00000, 0xC2AE0000, 0xC2AC0000, 0xC2AA0000,
|
|
0xC2A80000, 0xC2A60000, 0xC2A40000, 0xC2A20000, 0xC2A00000, 0xC29E0000,
|
|
0xC29C0000, 0xC29A0000, 0xC2980000, 0xC2960000, 0xC2940000, 0xC2920000,
|
|
0xC2900000, 0xC28E0000, 0xC28C0000, 0xC28A0000, 0xC2880000, 0xC2860000,
|
|
0xC2840000, 0xC2820000, 0xC2800000, 0xC27C0000, 0xC2780000, 0xC2740000,
|
|
0xC2700000, 0xC26C0000, 0xC2680000, 0xC2640000, 0xC2600000, 0xC25C0000,
|
|
0xC2580000, 0xC2540000, 0xC2500000, 0xC24C0000, 0xC2480000, 0xC2440000,
|
|
0xC2400000, 0xC23C0000, 0xC2380000, 0xC2340000, 0xC2300000, 0xC22C0000,
|
|
0xC2280000, 0xC2240000, 0xC2200000, 0xC21C0000, 0xC2180000, 0xC2140000,
|
|
0xC2100000, 0xC20C0000, 0xC2080000, 0xC2040000, 0xC2000000, 0xC1F80000,
|
|
0xC1F00000, 0xC1E80000, 0xC1E00000, 0xC1D80000, 0xC1D00000, 0xC1C80000,
|
|
0xC1C00000, 0xC1B80000, 0xC1B00000, 0xC1A80000, 0xC1A00000, 0xC1980000,
|
|
0xC1900000, 0xC1880000, 0xC1800000, 0xC1700000, 0xC1600000, 0xC1500000,
|
|
0xC1400000, 0xC1300000, 0xC1200000, 0xC1100000, 0xC1000000, 0xC0E00000,
|
|
0xC0C00000, 0xC0A00000, 0xC0800000, 0xC0400000, 0xC0000000, 0xBF800000,
|
|
0x00000000, 0x3F800000, 0x40000000, 0x40400000, 0x40800000, 0x40A00000,
|
|
0x40C00000, 0x40E00000, 0x41000000, 0x41100000
|
|
};
|
|
|
|
/*
|
|
* This table counts from float 0 to 1 in increments of .01, which is
|
|
* useful for a few different sliders.
|
|
*/
|
|
static const unsigned int float_zero_to_one_lookup[] = {
|
|
0x00000000, 0x3C23D70A, 0x3CA3D70A, 0x3CF5C28F, 0x3D23D70A, 0x3D4CCCCD,
|
|
0x3D75C28F, 0x3D8F5C29, 0x3DA3D70A, 0x3DB851EC, 0x3DCCCCCD, 0x3DE147AE,
|
|
0x3DF5C28F, 0x3E051EB8, 0x3E0F5C29, 0x3E19999A, 0x3E23D70A, 0x3E2E147B,
|
|
0x3E3851EC, 0x3E428F5C, 0x3E4CCCCD, 0x3E570A3D, 0x3E6147AE, 0x3E6B851F,
|
|
0x3E75C28F, 0x3E800000, 0x3E851EB8, 0x3E8A3D71, 0x3E8F5C29, 0x3E947AE1,
|
|
0x3E99999A, 0x3E9EB852, 0x3EA3D70A, 0x3EA8F5C3, 0x3EAE147B, 0x3EB33333,
|
|
0x3EB851EC, 0x3EBD70A4, 0x3EC28F5C, 0x3EC7AE14, 0x3ECCCCCD, 0x3ED1EB85,
|
|
0x3ED70A3D, 0x3EDC28F6, 0x3EE147AE, 0x3EE66666, 0x3EEB851F, 0x3EF0A3D7,
|
|
0x3EF5C28F, 0x3EFAE148, 0x3F000000, 0x3F028F5C, 0x3F051EB8, 0x3F07AE14,
|
|
0x3F0A3D71, 0x3F0CCCCD, 0x3F0F5C29, 0x3F11EB85, 0x3F147AE1, 0x3F170A3D,
|
|
0x3F19999A, 0x3F1C28F6, 0x3F1EB852, 0x3F2147AE, 0x3F23D70A, 0x3F266666,
|
|
0x3F28F5C3, 0x3F2B851F, 0x3F2E147B, 0x3F30A3D7, 0x3F333333, 0x3F35C28F,
|
|
0x3F3851EC, 0x3F3AE148, 0x3F3D70A4, 0x3F400000, 0x3F428F5C, 0x3F451EB8,
|
|
0x3F47AE14, 0x3F4A3D71, 0x3F4CCCCD, 0x3F4F5C29, 0x3F51EB85, 0x3F547AE1,
|
|
0x3F570A3D, 0x3F59999A, 0x3F5C28F6, 0x3F5EB852, 0x3F6147AE, 0x3F63D70A,
|
|
0x3F666666, 0x3F68F5C3, 0x3F6B851F, 0x3F6E147B, 0x3F70A3D7, 0x3F733333,
|
|
0x3F75C28F, 0x3F7851EC, 0x3F7AE148, 0x3F7D70A4, 0x3F800000
|
|
};
|
|
|
|
/*
|
|
* This table counts from float 10 to 1000, which is the range of the x-bass
|
|
* crossover slider in Windows.
|
|
*/
|
|
static const unsigned int float_xbass_xover_lookup[] = {
|
|
0x41200000, 0x41A00000, 0x41F00000, 0x42200000, 0x42480000, 0x42700000,
|
|
0x428C0000, 0x42A00000, 0x42B40000, 0x42C80000, 0x42DC0000, 0x42F00000,
|
|
0x43020000, 0x430C0000, 0x43160000, 0x43200000, 0x432A0000, 0x43340000,
|
|
0x433E0000, 0x43480000, 0x43520000, 0x435C0000, 0x43660000, 0x43700000,
|
|
0x437A0000, 0x43820000, 0x43870000, 0x438C0000, 0x43910000, 0x43960000,
|
|
0x439B0000, 0x43A00000, 0x43A50000, 0x43AA0000, 0x43AF0000, 0x43B40000,
|
|
0x43B90000, 0x43BE0000, 0x43C30000, 0x43C80000, 0x43CD0000, 0x43D20000,
|
|
0x43D70000, 0x43DC0000, 0x43E10000, 0x43E60000, 0x43EB0000, 0x43F00000,
|
|
0x43F50000, 0x43FA0000, 0x43FF0000, 0x44020000, 0x44048000, 0x44070000,
|
|
0x44098000, 0x440C0000, 0x440E8000, 0x44110000, 0x44138000, 0x44160000,
|
|
0x44188000, 0x441B0000, 0x441D8000, 0x44200000, 0x44228000, 0x44250000,
|
|
0x44278000, 0x442A0000, 0x442C8000, 0x442F0000, 0x44318000, 0x44340000,
|
|
0x44368000, 0x44390000, 0x443B8000, 0x443E0000, 0x44408000, 0x44430000,
|
|
0x44458000, 0x44480000, 0x444A8000, 0x444D0000, 0x444F8000, 0x44520000,
|
|
0x44548000, 0x44570000, 0x44598000, 0x445C0000, 0x445E8000, 0x44610000,
|
|
0x44638000, 0x44660000, 0x44688000, 0x446B0000, 0x446D8000, 0x44700000,
|
|
0x44728000, 0x44750000, 0x44778000, 0x447A0000
|
|
};
|
|
|
|
/* The following are for tuning of products */
|
|
#ifdef ENABLE_TUNING_CONTROLS
|
|
|
|
static unsigned int voice_focus_vals_lookup[] = {
|
|
0x41A00000, 0x41A80000, 0x41B00000, 0x41B80000, 0x41C00000, 0x41C80000,
|
|
0x41D00000, 0x41D80000, 0x41E00000, 0x41E80000, 0x41F00000, 0x41F80000,
|
|
0x42000000, 0x42040000, 0x42080000, 0x420C0000, 0x42100000, 0x42140000,
|
|
0x42180000, 0x421C0000, 0x42200000, 0x42240000, 0x42280000, 0x422C0000,
|
|
0x42300000, 0x42340000, 0x42380000, 0x423C0000, 0x42400000, 0x42440000,
|
|
0x42480000, 0x424C0000, 0x42500000, 0x42540000, 0x42580000, 0x425C0000,
|
|
0x42600000, 0x42640000, 0x42680000, 0x426C0000, 0x42700000, 0x42740000,
|
|
0x42780000, 0x427C0000, 0x42800000, 0x42820000, 0x42840000, 0x42860000,
|
|
0x42880000, 0x428A0000, 0x428C0000, 0x428E0000, 0x42900000, 0x42920000,
|
|
0x42940000, 0x42960000, 0x42980000, 0x429A0000, 0x429C0000, 0x429E0000,
|
|
0x42A00000, 0x42A20000, 0x42A40000, 0x42A60000, 0x42A80000, 0x42AA0000,
|
|
0x42AC0000, 0x42AE0000, 0x42B00000, 0x42B20000, 0x42B40000, 0x42B60000,
|
|
0x42B80000, 0x42BA0000, 0x42BC0000, 0x42BE0000, 0x42C00000, 0x42C20000,
|
|
0x42C40000, 0x42C60000, 0x42C80000, 0x42CA0000, 0x42CC0000, 0x42CE0000,
|
|
0x42D00000, 0x42D20000, 0x42D40000, 0x42D60000, 0x42D80000, 0x42DA0000,
|
|
0x42DC0000, 0x42DE0000, 0x42E00000, 0x42E20000, 0x42E40000, 0x42E60000,
|
|
0x42E80000, 0x42EA0000, 0x42EC0000, 0x42EE0000, 0x42F00000, 0x42F20000,
|
|
0x42F40000, 0x42F60000, 0x42F80000, 0x42FA0000, 0x42FC0000, 0x42FE0000,
|
|
0x43000000, 0x43010000, 0x43020000, 0x43030000, 0x43040000, 0x43050000,
|
|
0x43060000, 0x43070000, 0x43080000, 0x43090000, 0x430A0000, 0x430B0000,
|
|
0x430C0000, 0x430D0000, 0x430E0000, 0x430F0000, 0x43100000, 0x43110000,
|
|
0x43120000, 0x43130000, 0x43140000, 0x43150000, 0x43160000, 0x43170000,
|
|
0x43180000, 0x43190000, 0x431A0000, 0x431B0000, 0x431C0000, 0x431D0000,
|
|
0x431E0000, 0x431F0000, 0x43200000, 0x43210000, 0x43220000, 0x43230000,
|
|
0x43240000, 0x43250000, 0x43260000, 0x43270000, 0x43280000, 0x43290000,
|
|
0x432A0000, 0x432B0000, 0x432C0000, 0x432D0000, 0x432E0000, 0x432F0000,
|
|
0x43300000, 0x43310000, 0x43320000, 0x43330000, 0x43340000
|
|
};
|
|
|
|
static unsigned int mic_svm_vals_lookup[] = {
|
|
0x00000000, 0x3C23D70A, 0x3CA3D70A, 0x3CF5C28F, 0x3D23D70A, 0x3D4CCCCD,
|
|
0x3D75C28F, 0x3D8F5C29, 0x3DA3D70A, 0x3DB851EC, 0x3DCCCCCD, 0x3DE147AE,
|
|
0x3DF5C28F, 0x3E051EB8, 0x3E0F5C29, 0x3E19999A, 0x3E23D70A, 0x3E2E147B,
|
|
0x3E3851EC, 0x3E428F5C, 0x3E4CCCCD, 0x3E570A3D, 0x3E6147AE, 0x3E6B851F,
|
|
0x3E75C28F, 0x3E800000, 0x3E851EB8, 0x3E8A3D71, 0x3E8F5C29, 0x3E947AE1,
|
|
0x3E99999A, 0x3E9EB852, 0x3EA3D70A, 0x3EA8F5C3, 0x3EAE147B, 0x3EB33333,
|
|
0x3EB851EC, 0x3EBD70A4, 0x3EC28F5C, 0x3EC7AE14, 0x3ECCCCCD, 0x3ED1EB85,
|
|
0x3ED70A3D, 0x3EDC28F6, 0x3EE147AE, 0x3EE66666, 0x3EEB851F, 0x3EF0A3D7,
|
|
0x3EF5C28F, 0x3EFAE148, 0x3F000000, 0x3F028F5C, 0x3F051EB8, 0x3F07AE14,
|
|
0x3F0A3D71, 0x3F0CCCCD, 0x3F0F5C29, 0x3F11EB85, 0x3F147AE1, 0x3F170A3D,
|
|
0x3F19999A, 0x3F1C28F6, 0x3F1EB852, 0x3F2147AE, 0x3F23D70A, 0x3F266666,
|
|
0x3F28F5C3, 0x3F2B851F, 0x3F2E147B, 0x3F30A3D7, 0x3F333333, 0x3F35C28F,
|
|
0x3F3851EC, 0x3F3AE148, 0x3F3D70A4, 0x3F400000, 0x3F428F5C, 0x3F451EB8,
|
|
0x3F47AE14, 0x3F4A3D71, 0x3F4CCCCD, 0x3F4F5C29, 0x3F51EB85, 0x3F547AE1,
|
|
0x3F570A3D, 0x3F59999A, 0x3F5C28F6, 0x3F5EB852, 0x3F6147AE, 0x3F63D70A,
|
|
0x3F666666, 0x3F68F5C3, 0x3F6B851F, 0x3F6E147B, 0x3F70A3D7, 0x3F733333,
|
|
0x3F75C28F, 0x3F7851EC, 0x3F7AE148, 0x3F7D70A4, 0x3F800000
|
|
};
|
|
|
|
static unsigned int equalizer_vals_lookup[] = {
|
|
0xC1C00000, 0xC1B80000, 0xC1B00000, 0xC1A80000, 0xC1A00000, 0xC1980000,
|
|
0xC1900000, 0xC1880000, 0xC1800000, 0xC1700000, 0xC1600000, 0xC1500000,
|
|
0xC1400000, 0xC1300000, 0xC1200000, 0xC1100000, 0xC1000000, 0xC0E00000,
|
|
0xC0C00000, 0xC0A00000, 0xC0800000, 0xC0400000, 0xC0000000, 0xBF800000,
|
|
0x00000000, 0x3F800000, 0x40000000, 0x40400000, 0x40800000, 0x40A00000,
|
|
0x40C00000, 0x40E00000, 0x41000000, 0x41100000, 0x41200000, 0x41300000,
|
|
0x41400000, 0x41500000, 0x41600000, 0x41700000, 0x41800000, 0x41880000,
|
|
0x41900000, 0x41980000, 0x41A00000, 0x41A80000, 0x41B00000, 0x41B80000,
|
|
0x41C00000
|
|
};
|
|
|
|
static int tuning_ctl_set(struct hda_codec *codec, hda_nid_t nid,
|
|
unsigned int *lookup, int idx)
|
|
{
|
|
int i = 0;
|
|
|
|
for (i = 0; i < TUNING_CTLS_COUNT; i++)
|
|
if (nid == ca0132_tuning_ctls[i].nid)
|
|
goto found;
|
|
|
|
return -EINVAL;
|
|
found:
|
|
snd_hda_power_up(codec);
|
|
dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20,
|
|
ca0132_tuning_ctls[i].req,
|
|
&(lookup[idx]), sizeof(unsigned int));
|
|
snd_hda_power_down(codec);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int tuning_ctl_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
hda_nid_t nid = get_amp_nid(kcontrol);
|
|
long *valp = ucontrol->value.integer.value;
|
|
int idx = nid - TUNING_CTL_START_NID;
|
|
|
|
*valp = spec->cur_ctl_vals[idx];
|
|
return 0;
|
|
}
|
|
|
|
static int voice_focus_ctl_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
int chs = get_amp_channels(kcontrol);
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
|
|
uinfo->count = chs == 3 ? 2 : 1;
|
|
uinfo->value.integer.min = 20;
|
|
uinfo->value.integer.max = 180;
|
|
uinfo->value.integer.step = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int voice_focus_ctl_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
hda_nid_t nid = get_amp_nid(kcontrol);
|
|
long *valp = ucontrol->value.integer.value;
|
|
int idx;
|
|
|
|
idx = nid - TUNING_CTL_START_NID;
|
|
/* any change? */
|
|
if (spec->cur_ctl_vals[idx] == *valp)
|
|
return 0;
|
|
|
|
spec->cur_ctl_vals[idx] = *valp;
|
|
|
|
idx = *valp - 20;
|
|
tuning_ctl_set(codec, nid, voice_focus_vals_lookup, idx);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int mic_svm_ctl_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
int chs = get_amp_channels(kcontrol);
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
|
|
uinfo->count = chs == 3 ? 2 : 1;
|
|
uinfo->value.integer.min = 0;
|
|
uinfo->value.integer.max = 100;
|
|
uinfo->value.integer.step = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mic_svm_ctl_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
hda_nid_t nid = get_amp_nid(kcontrol);
|
|
long *valp = ucontrol->value.integer.value;
|
|
int idx;
|
|
|
|
idx = nid - TUNING_CTL_START_NID;
|
|
/* any change? */
|
|
if (spec->cur_ctl_vals[idx] == *valp)
|
|
return 0;
|
|
|
|
spec->cur_ctl_vals[idx] = *valp;
|
|
|
|
idx = *valp;
|
|
tuning_ctl_set(codec, nid, mic_svm_vals_lookup, idx);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int equalizer_ctl_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
int chs = get_amp_channels(kcontrol);
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
|
|
uinfo->count = chs == 3 ? 2 : 1;
|
|
uinfo->value.integer.min = 0;
|
|
uinfo->value.integer.max = 48;
|
|
uinfo->value.integer.step = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int equalizer_ctl_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
hda_nid_t nid = get_amp_nid(kcontrol);
|
|
long *valp = ucontrol->value.integer.value;
|
|
int idx;
|
|
|
|
idx = nid - TUNING_CTL_START_NID;
|
|
/* any change? */
|
|
if (spec->cur_ctl_vals[idx] == *valp)
|
|
return 0;
|
|
|
|
spec->cur_ctl_vals[idx] = *valp;
|
|
|
|
idx = *valp;
|
|
tuning_ctl_set(codec, nid, equalizer_vals_lookup, idx);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(voice_focus_db_scale, 2000, 100, 0);
|
|
static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(eq_db_scale, -2400, 100, 0);
|
|
|
|
static int add_tuning_control(struct hda_codec *codec,
|
|
hda_nid_t pnid, hda_nid_t nid,
|
|
const char *name, int dir)
|
|
{
|
|
char namestr[SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
|
|
int type = dir ? HDA_INPUT : HDA_OUTPUT;
|
|
struct snd_kcontrol_new knew =
|
|
HDA_CODEC_VOLUME_MONO(namestr, nid, 1, 0, type);
|
|
|
|
knew.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
|
|
SNDRV_CTL_ELEM_ACCESS_TLV_READ;
|
|
knew.tlv.c = 0;
|
|
knew.tlv.p = 0;
|
|
switch (pnid) {
|
|
case VOICE_FOCUS:
|
|
knew.info = voice_focus_ctl_info;
|
|
knew.get = tuning_ctl_get;
|
|
knew.put = voice_focus_ctl_put;
|
|
knew.tlv.p = voice_focus_db_scale;
|
|
break;
|
|
case MIC_SVM:
|
|
knew.info = mic_svm_ctl_info;
|
|
knew.get = tuning_ctl_get;
|
|
knew.put = mic_svm_ctl_put;
|
|
break;
|
|
case EQUALIZER:
|
|
knew.info = equalizer_ctl_info;
|
|
knew.get = tuning_ctl_get;
|
|
knew.put = equalizer_ctl_put;
|
|
knew.tlv.p = eq_db_scale;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
knew.private_value =
|
|
HDA_COMPOSE_AMP_VAL(nid, 1, 0, type);
|
|
sprintf(namestr, "%s %s Volume", name, dirstr[dir]);
|
|
return snd_hda_ctl_add(codec, nid, snd_ctl_new1(&knew, codec));
|
|
}
|
|
|
|
static int add_tuning_ctls(struct hda_codec *codec)
|
|
{
|
|
int i;
|
|
int err;
|
|
|
|
for (i = 0; i < TUNING_CTLS_COUNT; i++) {
|
|
err = add_tuning_control(codec,
|
|
ca0132_tuning_ctls[i].parent_nid,
|
|
ca0132_tuning_ctls[i].nid,
|
|
ca0132_tuning_ctls[i].name,
|
|
ca0132_tuning_ctls[i].direct);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ca0132_init_tuning_defaults(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
int i;
|
|
|
|
/* Wedge Angle defaults to 30. 10 below is 30 - 20. 20 is min. */
|
|
spec->cur_ctl_vals[WEDGE_ANGLE - TUNING_CTL_START_NID] = 10;
|
|
/* SVM level defaults to 0.74. */
|
|
spec->cur_ctl_vals[SVM_LEVEL - TUNING_CTL_START_NID] = 74;
|
|
|
|
/* EQ defaults to 0dB. */
|
|
for (i = 2; i < TUNING_CTLS_COUNT; i++)
|
|
spec->cur_ctl_vals[i] = 24;
|
|
}
|
|
#endif /*ENABLE_TUNING_CONTROLS*/
|
|
|
|
/*
|
|
* Select the active output.
|
|
* If autodetect is enabled, output will be selected based on jack detection.
|
|
* If jack inserted, headphone will be selected, else built-in speakers
|
|
* If autodetect is disabled, output will be selected based on selection.
|
|
*/
|
|
static int ca0132_select_out(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
unsigned int pin_ctl;
|
|
int jack_present;
|
|
int auto_jack;
|
|
unsigned int tmp;
|
|
int err;
|
|
|
|
codec_dbg(codec, "ca0132_select_out\n");
|
|
|
|
snd_hda_power_up_pm(codec);
|
|
|
|
auto_jack = spec->vnode_lswitch[VNID_HP_ASEL - VNODE_START_NID];
|
|
|
|
if (auto_jack)
|
|
jack_present = snd_hda_jack_detect(codec, spec->unsol_tag_hp);
|
|
else
|
|
jack_present =
|
|
spec->vnode_lswitch[VNID_HP_SEL - VNODE_START_NID];
|
|
|
|
if (jack_present)
|
|
spec->cur_out_type = HEADPHONE_OUT;
|
|
else
|
|
spec->cur_out_type = SPEAKER_OUT;
|
|
|
|
if (spec->cur_out_type == SPEAKER_OUT) {
|
|
codec_dbg(codec, "ca0132_select_out speaker\n");
|
|
/*speaker out config*/
|
|
tmp = FLOAT_ONE;
|
|
err = dspio_set_uint_param(codec, 0x80, 0x04, tmp);
|
|
if (err < 0)
|
|
goto exit;
|
|
/*enable speaker EQ*/
|
|
tmp = FLOAT_ONE;
|
|
err = dspio_set_uint_param(codec, 0x8f, 0x00, tmp);
|
|
if (err < 0)
|
|
goto exit;
|
|
|
|
/* Setup EAPD */
|
|
snd_hda_codec_write(codec, spec->out_pins[1], 0,
|
|
VENDOR_CHIPIO_EAPD_SEL_SET, 0x02);
|
|
snd_hda_codec_write(codec, spec->out_pins[0], 0,
|
|
AC_VERB_SET_EAPD_BTLENABLE, 0x00);
|
|
snd_hda_codec_write(codec, spec->out_pins[0], 0,
|
|
VENDOR_CHIPIO_EAPD_SEL_SET, 0x00);
|
|
snd_hda_codec_write(codec, spec->out_pins[0], 0,
|
|
AC_VERB_SET_EAPD_BTLENABLE, 0x02);
|
|
|
|
/* disable headphone node */
|
|
pin_ctl = snd_hda_codec_read(codec, spec->out_pins[1], 0,
|
|
AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
|
|
snd_hda_set_pin_ctl(codec, spec->out_pins[1],
|
|
pin_ctl & ~PIN_HP);
|
|
/* enable speaker node */
|
|
pin_ctl = snd_hda_codec_read(codec, spec->out_pins[0], 0,
|
|
AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
|
|
snd_hda_set_pin_ctl(codec, spec->out_pins[0],
|
|
pin_ctl | PIN_OUT);
|
|
} else {
|
|
codec_dbg(codec, "ca0132_select_out hp\n");
|
|
/*headphone out config*/
|
|
tmp = FLOAT_ZERO;
|
|
err = dspio_set_uint_param(codec, 0x80, 0x04, tmp);
|
|
if (err < 0)
|
|
goto exit;
|
|
/*disable speaker EQ*/
|
|
tmp = FLOAT_ZERO;
|
|
err = dspio_set_uint_param(codec, 0x8f, 0x00, tmp);
|
|
if (err < 0)
|
|
goto exit;
|
|
|
|
/* Setup EAPD */
|
|
snd_hda_codec_write(codec, spec->out_pins[0], 0,
|
|
VENDOR_CHIPIO_EAPD_SEL_SET, 0x00);
|
|
snd_hda_codec_write(codec, spec->out_pins[0], 0,
|
|
AC_VERB_SET_EAPD_BTLENABLE, 0x00);
|
|
snd_hda_codec_write(codec, spec->out_pins[1], 0,
|
|
VENDOR_CHIPIO_EAPD_SEL_SET, 0x02);
|
|
snd_hda_codec_write(codec, spec->out_pins[0], 0,
|
|
AC_VERB_SET_EAPD_BTLENABLE, 0x02);
|
|
|
|
/* disable speaker*/
|
|
pin_ctl = snd_hda_codec_read(codec, spec->out_pins[0], 0,
|
|
AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
|
|
snd_hda_set_pin_ctl(codec, spec->out_pins[0],
|
|
pin_ctl & ~PIN_HP);
|
|
/* enable headphone*/
|
|
pin_ctl = snd_hda_codec_read(codec, spec->out_pins[1], 0,
|
|
AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
|
|
snd_hda_set_pin_ctl(codec, spec->out_pins[1],
|
|
pin_ctl | PIN_HP);
|
|
}
|
|
|
|
exit:
|
|
snd_hda_power_down_pm(codec);
|
|
|
|
return err < 0 ? err : 0;
|
|
}
|
|
|
|
static int ae5_headphone_gain_set(struct hda_codec *codec, long val);
|
|
static int zxr_headphone_gain_set(struct hda_codec *codec, long val);
|
|
static int ca0132_effects_set(struct hda_codec *codec, hda_nid_t nid, long val);
|
|
|
|
static void ae5_mmio_select_out(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < AE5_CA0113_OUT_SET_COMMANDS; i++)
|
|
ca0113_mmio_command_set(codec,
|
|
ae5_ca0113_output_presets[spec->cur_out_type].group[i],
|
|
ae5_ca0113_output_presets[spec->cur_out_type].target[i],
|
|
ae5_ca0113_output_presets[spec->cur_out_type].vals[i]);
|
|
}
|
|
|
|
/*
|
|
* These are the commands needed to setup output on each of the different card
|
|
* types.
|
|
*/
|
|
static void ca0132_alt_select_out_quirk_handler(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
unsigned int tmp;
|
|
|
|
switch (spec->cur_out_type) {
|
|
case SPEAKER_OUT:
|
|
switch (ca0132_quirk(spec)) {
|
|
case QUIRK_SBZ:
|
|
ca0113_mmio_gpio_set(codec, 7, false);
|
|
ca0113_mmio_gpio_set(codec, 4, true);
|
|
ca0113_mmio_gpio_set(codec, 1, true);
|
|
chipio_set_control_param(codec, 0x0d, 0x18);
|
|
break;
|
|
case QUIRK_ZXR:
|
|
ca0113_mmio_gpio_set(codec, 2, true);
|
|
ca0113_mmio_gpio_set(codec, 3, true);
|
|
ca0113_mmio_gpio_set(codec, 5, false);
|
|
zxr_headphone_gain_set(codec, 0);
|
|
chipio_set_control_param(codec, 0x0d, 0x24);
|
|
break;
|
|
case QUIRK_R3DI:
|
|
chipio_set_control_param(codec, 0x0d, 0x24);
|
|
r3di_gpio_out_set(codec, R3DI_LINE_OUT);
|
|
break;
|
|
case QUIRK_R3D:
|
|
chipio_set_control_param(codec, 0x0d, 0x24);
|
|
ca0113_mmio_gpio_set(codec, 1, true);
|
|
break;
|
|
case QUIRK_AE5:
|
|
ae5_mmio_select_out(codec);
|
|
ae5_headphone_gain_set(codec, 2);
|
|
tmp = FLOAT_ZERO;
|
|
dspio_set_uint_param(codec, 0x96, 0x29, tmp);
|
|
dspio_set_uint_param(codec, 0x96, 0x2a, tmp);
|
|
chipio_set_control_param(codec, 0x0d, 0xa4);
|
|
chipio_write(codec, 0x18b03c, 0x00000012);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
case HEADPHONE_OUT:
|
|
switch (ca0132_quirk(spec)) {
|
|
case QUIRK_SBZ:
|
|
ca0113_mmio_gpio_set(codec, 7, true);
|
|
ca0113_mmio_gpio_set(codec, 4, true);
|
|
ca0113_mmio_gpio_set(codec, 1, false);
|
|
chipio_set_control_param(codec, 0x0d, 0x12);
|
|
break;
|
|
case QUIRK_ZXR:
|
|
ca0113_mmio_gpio_set(codec, 2, false);
|
|
ca0113_mmio_gpio_set(codec, 3, false);
|
|
ca0113_mmio_gpio_set(codec, 5, true);
|
|
zxr_headphone_gain_set(codec, spec->zxr_gain_set);
|
|
chipio_set_control_param(codec, 0x0d, 0x21);
|
|
break;
|
|
case QUIRK_R3DI:
|
|
chipio_set_control_param(codec, 0x0d, 0x21);
|
|
r3di_gpio_out_set(codec, R3DI_HEADPHONE_OUT);
|
|
break;
|
|
case QUIRK_R3D:
|
|
chipio_set_control_param(codec, 0x0d, 0x21);
|
|
ca0113_mmio_gpio_set(codec, 0x1, false);
|
|
break;
|
|
case QUIRK_AE5:
|
|
ae5_mmio_select_out(codec);
|
|
ae5_headphone_gain_set(codec,
|
|
spec->ae5_headphone_gain_val);
|
|
tmp = FLOAT_ONE;
|
|
dspio_set_uint_param(codec, 0x96, 0x29, tmp);
|
|
dspio_set_uint_param(codec, 0x96, 0x2a, tmp);
|
|
chipio_set_control_param(codec, 0x0d, 0xa1);
|
|
chipio_write(codec, 0x18b03c, 0x00000012);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
case SURROUND_OUT:
|
|
switch (ca0132_quirk(spec)) {
|
|
case QUIRK_SBZ:
|
|
ca0113_mmio_gpio_set(codec, 7, false);
|
|
ca0113_mmio_gpio_set(codec, 4, true);
|
|
ca0113_mmio_gpio_set(codec, 1, true);
|
|
chipio_set_control_param(codec, 0x0d, 0x18);
|
|
break;
|
|
case QUIRK_ZXR:
|
|
ca0113_mmio_gpio_set(codec, 2, true);
|
|
ca0113_mmio_gpio_set(codec, 3, true);
|
|
ca0113_mmio_gpio_set(codec, 5, false);
|
|
zxr_headphone_gain_set(codec, 0);
|
|
chipio_set_control_param(codec, 0x0d, 0x24);
|
|
break;
|
|
case QUIRK_R3DI:
|
|
chipio_set_control_param(codec, 0x0d, 0x24);
|
|
r3di_gpio_out_set(codec, R3DI_LINE_OUT);
|
|
break;
|
|
case QUIRK_R3D:
|
|
ca0113_mmio_gpio_set(codec, 1, true);
|
|
chipio_set_control_param(codec, 0x0d, 0x24);
|
|
break;
|
|
case QUIRK_AE5:
|
|
ae5_mmio_select_out(codec);
|
|
ae5_headphone_gain_set(codec, 2);
|
|
tmp = FLOAT_ZERO;
|
|
dspio_set_uint_param(codec, 0x96, 0x29, tmp);
|
|
dspio_set_uint_param(codec, 0x96, 0x2a, tmp);
|
|
chipio_set_control_param(codec, 0x0d, 0xa4);
|
|
chipio_write(codec, 0x18b03c, 0x00000012);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* This function behaves similarly to the ca0132_select_out funciton above,
|
|
* except with a few differences. It adds the ability to select the current
|
|
* output with an enumerated control "output source" if the auto detect
|
|
* mute switch is set to off. If the auto detect mute switch is enabled, it
|
|
* will detect either headphone or lineout(SPEAKER_OUT) from jack detection.
|
|
* It also adds the ability to auto-detect the front headphone port. The only
|
|
* way to select surround is to disable auto detect, and set Surround with the
|
|
* enumerated control.
|
|
*/
|
|
static int ca0132_alt_select_out(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
unsigned int pin_ctl;
|
|
int jack_present;
|
|
int auto_jack;
|
|
unsigned int i;
|
|
unsigned int tmp;
|
|
int err;
|
|
/* Default Headphone is rear headphone */
|
|
hda_nid_t headphone_nid = spec->out_pins[1];
|
|
|
|
codec_dbg(codec, "%s\n", __func__);
|
|
|
|
snd_hda_power_up_pm(codec);
|
|
|
|
auto_jack = spec->vnode_lswitch[VNID_HP_ASEL - VNODE_START_NID];
|
|
|
|
/*
|
|
* If headphone rear or front is plugged in, set to headphone.
|
|
* If neither is plugged in, set to rear line out. Only if
|
|
* hp/speaker auto detect is enabled.
|
|
*/
|
|
if (auto_jack) {
|
|
jack_present = snd_hda_jack_detect(codec, spec->unsol_tag_hp) ||
|
|
snd_hda_jack_detect(codec, spec->unsol_tag_front_hp);
|
|
|
|
if (jack_present)
|
|
spec->cur_out_type = HEADPHONE_OUT;
|
|
else
|
|
spec->cur_out_type = SPEAKER_OUT;
|
|
} else
|
|
spec->cur_out_type = spec->out_enum_val;
|
|
|
|
/* Begin DSP output switch */
|
|
tmp = FLOAT_ONE;
|
|
err = dspio_set_uint_param(codec, 0x96, 0x3A, tmp);
|
|
if (err < 0)
|
|
goto exit;
|
|
|
|
ca0132_alt_select_out_quirk_handler(codec);
|
|
|
|
switch (spec->cur_out_type) {
|
|
case SPEAKER_OUT:
|
|
codec_dbg(codec, "%s speaker\n", __func__);
|
|
|
|
/* disable headphone node */
|
|
pin_ctl = snd_hda_codec_read(codec, spec->out_pins[1], 0,
|
|
AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
|
|
snd_hda_set_pin_ctl(codec, spec->out_pins[1],
|
|
pin_ctl & ~PIN_HP);
|
|
/* enable line-out node */
|
|
pin_ctl = snd_hda_codec_read(codec, spec->out_pins[0], 0,
|
|
AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
|
|
snd_hda_set_pin_ctl(codec, spec->out_pins[0],
|
|
pin_ctl | PIN_OUT);
|
|
/* Enable EAPD */
|
|
snd_hda_codec_write(codec, spec->out_pins[0], 0,
|
|
AC_VERB_SET_EAPD_BTLENABLE, 0x01);
|
|
|
|
/* If PlayEnhancement is enabled, set different source */
|
|
if (spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID])
|
|
dspio_set_uint_param(codec, 0x80, 0x04, FLOAT_ONE);
|
|
else
|
|
dspio_set_uint_param(codec, 0x80, 0x04, FLOAT_EIGHT);
|
|
break;
|
|
case HEADPHONE_OUT:
|
|
codec_dbg(codec, "%s hp\n", __func__);
|
|
|
|
snd_hda_codec_write(codec, spec->out_pins[0], 0,
|
|
AC_VERB_SET_EAPD_BTLENABLE, 0x00);
|
|
|
|
/* disable speaker*/
|
|
pin_ctl = snd_hda_codec_read(codec, spec->out_pins[0], 0,
|
|
AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
|
|
snd_hda_set_pin_ctl(codec, spec->out_pins[0],
|
|
pin_ctl & ~PIN_HP);
|
|
|
|
/* enable headphone, either front or rear */
|
|
|
|
if (snd_hda_jack_detect(codec, spec->unsol_tag_front_hp))
|
|
headphone_nid = spec->out_pins[2];
|
|
else if (snd_hda_jack_detect(codec, spec->unsol_tag_hp))
|
|
headphone_nid = spec->out_pins[1];
|
|
|
|
pin_ctl = snd_hda_codec_read(codec, headphone_nid, 0,
|
|
AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
|
|
snd_hda_set_pin_ctl(codec, headphone_nid,
|
|
pin_ctl | PIN_HP);
|
|
|
|
if (spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID])
|
|
dspio_set_uint_param(codec, 0x80, 0x04, FLOAT_ONE);
|
|
else
|
|
dspio_set_uint_param(codec, 0x80, 0x04, FLOAT_ZERO);
|
|
break;
|
|
case SURROUND_OUT:
|
|
codec_dbg(codec, "%s surround\n", __func__);
|
|
|
|
/* enable line out node */
|
|
pin_ctl = snd_hda_codec_read(codec, spec->out_pins[0], 0,
|
|
AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
|
|
snd_hda_set_pin_ctl(codec, spec->out_pins[0],
|
|
pin_ctl | PIN_OUT);
|
|
/* Disable headphone out */
|
|
pin_ctl = snd_hda_codec_read(codec, spec->out_pins[1], 0,
|
|
AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
|
|
snd_hda_set_pin_ctl(codec, spec->out_pins[1],
|
|
pin_ctl & ~PIN_HP);
|
|
/* Enable EAPD on line out */
|
|
snd_hda_codec_write(codec, spec->out_pins[0], 0,
|
|
AC_VERB_SET_EAPD_BTLENABLE, 0x01);
|
|
/* enable center/lfe out node */
|
|
pin_ctl = snd_hda_codec_read(codec, spec->out_pins[2], 0,
|
|
AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
|
|
snd_hda_set_pin_ctl(codec, spec->out_pins[2],
|
|
pin_ctl | PIN_OUT);
|
|
/* Now set rear surround node as out. */
|
|
pin_ctl = snd_hda_codec_read(codec, spec->out_pins[3], 0,
|
|
AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
|
|
snd_hda_set_pin_ctl(codec, spec->out_pins[3],
|
|
pin_ctl | PIN_OUT);
|
|
|
|
dspio_set_uint_param(codec, 0x80, 0x04, FLOAT_EIGHT);
|
|
break;
|
|
}
|
|
/*
|
|
* Surround always sets it's scp command to req 0x04 to FLOAT_EIGHT.
|
|
* With this set though, X_BASS cannot be enabled. So, if we have OutFX
|
|
* enabled, we need to make sure X_BASS is off, otherwise everything
|
|
* sounds all muffled. Running ca0132_effects_set with X_BASS as the
|
|
* effect should sort this out.
|
|
*/
|
|
if (spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID])
|
|
ca0132_effects_set(codec, X_BASS,
|
|
spec->effects_switch[X_BASS - EFFECT_START_NID]);
|
|
|
|
/* run through the output dsp commands for the selected output. */
|
|
for (i = 0; i < alt_out_presets[spec->cur_out_type].commands; i++) {
|
|
err = dspio_set_uint_param(codec,
|
|
alt_out_presets[spec->cur_out_type].mids[i],
|
|
alt_out_presets[spec->cur_out_type].reqs[i],
|
|
alt_out_presets[spec->cur_out_type].vals[i]);
|
|
|
|
if (err < 0)
|
|
goto exit;
|
|
}
|
|
|
|
exit:
|
|
snd_hda_power_down_pm(codec);
|
|
|
|
return err < 0 ? err : 0;
|
|
}
|
|
|
|
static void ca0132_unsol_hp_delayed(struct work_struct *work)
|
|
{
|
|
struct ca0132_spec *spec = container_of(
|
|
to_delayed_work(work), struct ca0132_spec, unsol_hp_work);
|
|
struct hda_jack_tbl *jack;
|
|
|
|
if (ca0132_use_alt_functions(spec))
|
|
ca0132_alt_select_out(spec->codec);
|
|
else
|
|
ca0132_select_out(spec->codec);
|
|
|
|
jack = snd_hda_jack_tbl_get(spec->codec, spec->unsol_tag_hp);
|
|
if (jack) {
|
|
jack->block_report = 0;
|
|
snd_hda_jack_report_sync(spec->codec);
|
|
}
|
|
}
|
|
|
|
static void ca0132_set_dmic(struct hda_codec *codec, int enable);
|
|
static int ca0132_mic_boost_set(struct hda_codec *codec, long val);
|
|
static void resume_mic1(struct hda_codec *codec, unsigned int oldval);
|
|
static int stop_mic1(struct hda_codec *codec);
|
|
static int ca0132_cvoice_switch_set(struct hda_codec *codec);
|
|
static int ca0132_alt_mic_boost_set(struct hda_codec *codec, long val);
|
|
|
|
/*
|
|
* Select the active VIP source
|
|
*/
|
|
static int ca0132_set_vipsource(struct hda_codec *codec, int val)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
unsigned int tmp;
|
|
|
|
if (spec->dsp_state != DSP_DOWNLOADED)
|
|
return 0;
|
|
|
|
/* if CrystalVoice if off, vipsource should be 0 */
|
|
if (!spec->effects_switch[CRYSTAL_VOICE - EFFECT_START_NID] ||
|
|
(val == 0)) {
|
|
chipio_set_control_param(codec, CONTROL_PARAM_VIP_SOURCE, 0);
|
|
chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000);
|
|
chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000);
|
|
if (spec->cur_mic_type == DIGITAL_MIC)
|
|
tmp = FLOAT_TWO;
|
|
else
|
|
tmp = FLOAT_ONE;
|
|
dspio_set_uint_param(codec, 0x80, 0x00, tmp);
|
|
tmp = FLOAT_ZERO;
|
|
dspio_set_uint_param(codec, 0x80, 0x05, tmp);
|
|
} else {
|
|
chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_16_000);
|
|
chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_16_000);
|
|
if (spec->cur_mic_type == DIGITAL_MIC)
|
|
tmp = FLOAT_TWO;
|
|
else
|
|
tmp = FLOAT_ONE;
|
|
dspio_set_uint_param(codec, 0x80, 0x00, tmp);
|
|
tmp = FLOAT_ONE;
|
|
dspio_set_uint_param(codec, 0x80, 0x05, tmp);
|
|
msleep(20);
|
|
chipio_set_control_param(codec, CONTROL_PARAM_VIP_SOURCE, val);
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int ca0132_alt_set_vipsource(struct hda_codec *codec, int val)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
unsigned int tmp;
|
|
|
|
if (spec->dsp_state != DSP_DOWNLOADED)
|
|
return 0;
|
|
|
|
codec_dbg(codec, "%s\n", __func__);
|
|
|
|
chipio_set_stream_control(codec, 0x03, 0);
|
|
chipio_set_stream_control(codec, 0x04, 0);
|
|
|
|
/* if CrystalVoice is off, vipsource should be 0 */
|
|
if (!spec->effects_switch[CRYSTAL_VOICE - EFFECT_START_NID] ||
|
|
(val == 0) || spec->in_enum_val == REAR_LINE_IN) {
|
|
codec_dbg(codec, "%s: off.", __func__);
|
|
chipio_set_control_param(codec, CONTROL_PARAM_VIP_SOURCE, 0);
|
|
|
|
tmp = FLOAT_ZERO;
|
|
dspio_set_uint_param(codec, 0x80, 0x05, tmp);
|
|
|
|
chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000);
|
|
chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000);
|
|
if (ca0132_quirk(spec) == QUIRK_R3DI)
|
|
chipio_set_conn_rate(codec, 0x0F, SR_96_000);
|
|
|
|
|
|
if (spec->in_enum_val == REAR_LINE_IN)
|
|
tmp = FLOAT_ZERO;
|
|
else {
|
|
if (ca0132_quirk(spec) == QUIRK_SBZ)
|
|
tmp = FLOAT_THREE;
|
|
else
|
|
tmp = FLOAT_ONE;
|
|
}
|
|
|
|
dspio_set_uint_param(codec, 0x80, 0x00, tmp);
|
|
|
|
} else {
|
|
codec_dbg(codec, "%s: on.", __func__);
|
|
chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_16_000);
|
|
chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_16_000);
|
|
if (ca0132_quirk(spec) == QUIRK_R3DI)
|
|
chipio_set_conn_rate(codec, 0x0F, SR_16_000);
|
|
|
|
if (spec->effects_switch[VOICE_FOCUS - EFFECT_START_NID])
|
|
tmp = FLOAT_TWO;
|
|
else
|
|
tmp = FLOAT_ONE;
|
|
dspio_set_uint_param(codec, 0x80, 0x00, tmp);
|
|
|
|
tmp = FLOAT_ONE;
|
|
dspio_set_uint_param(codec, 0x80, 0x05, tmp);
|
|
|
|
msleep(20);
|
|
chipio_set_control_param(codec, CONTROL_PARAM_VIP_SOURCE, val);
|
|
}
|
|
|
|
chipio_set_stream_control(codec, 0x03, 1);
|
|
chipio_set_stream_control(codec, 0x04, 1);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Select the active microphone.
|
|
* If autodetect is enabled, mic will be selected based on jack detection.
|
|
* If jack inserted, ext.mic will be selected, else built-in mic
|
|
* If autodetect is disabled, mic will be selected based on selection.
|
|
*/
|
|
static int ca0132_select_mic(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
int jack_present;
|
|
int auto_jack;
|
|
|
|
codec_dbg(codec, "ca0132_select_mic\n");
|
|
|
|
snd_hda_power_up_pm(codec);
|
|
|
|
auto_jack = spec->vnode_lswitch[VNID_AMIC1_ASEL - VNODE_START_NID];
|
|
|
|
if (auto_jack)
|
|
jack_present = snd_hda_jack_detect(codec, spec->unsol_tag_amic1);
|
|
else
|
|
jack_present =
|
|
spec->vnode_lswitch[VNID_AMIC1_SEL - VNODE_START_NID];
|
|
|
|
if (jack_present)
|
|
spec->cur_mic_type = LINE_MIC_IN;
|
|
else
|
|
spec->cur_mic_type = DIGITAL_MIC;
|
|
|
|
if (spec->cur_mic_type == DIGITAL_MIC) {
|
|
/* enable digital Mic */
|
|
chipio_set_conn_rate(codec, MEM_CONNID_DMIC, SR_32_000);
|
|
ca0132_set_dmic(codec, 1);
|
|
ca0132_mic_boost_set(codec, 0);
|
|
/* set voice focus */
|
|
ca0132_effects_set(codec, VOICE_FOCUS,
|
|
spec->effects_switch
|
|
[VOICE_FOCUS - EFFECT_START_NID]);
|
|
} else {
|
|
/* disable digital Mic */
|
|
chipio_set_conn_rate(codec, MEM_CONNID_DMIC, SR_96_000);
|
|
ca0132_set_dmic(codec, 0);
|
|
ca0132_mic_boost_set(codec, spec->cur_mic_boost);
|
|
/* disable voice focus */
|
|
ca0132_effects_set(codec, VOICE_FOCUS, 0);
|
|
}
|
|
|
|
snd_hda_power_down_pm(codec);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Select the active input.
|
|
* Mic detection isn't used, because it's kind of pointless on the SBZ.
|
|
* The front mic has no jack-detection, so the only way to switch to it
|
|
* is to do it manually in alsamixer.
|
|
*/
|
|
static int ca0132_alt_select_in(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
unsigned int tmp;
|
|
|
|
codec_dbg(codec, "%s\n", __func__);
|
|
|
|
snd_hda_power_up_pm(codec);
|
|
|
|
chipio_set_stream_control(codec, 0x03, 0);
|
|
chipio_set_stream_control(codec, 0x04, 0);
|
|
|
|
spec->cur_mic_type = spec->in_enum_val;
|
|
|
|
switch (spec->cur_mic_type) {
|
|
case REAR_MIC:
|
|
switch (ca0132_quirk(spec)) {
|
|
case QUIRK_SBZ:
|
|
case QUIRK_R3D:
|
|
ca0113_mmio_gpio_set(codec, 0, false);
|
|
tmp = FLOAT_THREE;
|
|
break;
|
|
case QUIRK_ZXR:
|
|
tmp = FLOAT_THREE;
|
|
break;
|
|
case QUIRK_R3DI:
|
|
r3di_gpio_mic_set(codec, R3DI_REAR_MIC);
|
|
tmp = FLOAT_ONE;
|
|
break;
|
|
case QUIRK_AE5:
|
|
ca0113_mmio_command_set(codec, 0x30, 0x28, 0x00);
|
|
tmp = FLOAT_THREE;
|
|
break;
|
|
case QUIRK_AE7:
|
|
ca0113_mmio_command_set(codec, 0x30, 0x28, 0x00);
|
|
tmp = FLOAT_THREE;
|
|
chipio_set_conn_rate(codec, MEM_CONNID_MICIN2,
|
|
SR_96_000);
|
|
chipio_set_conn_rate(codec, MEM_CONNID_MICOUT2,
|
|
SR_96_000);
|
|
dspio_set_uint_param(codec, 0x80, 0x01, FLOAT_ZERO);
|
|
break;
|
|
default:
|
|
tmp = FLOAT_ONE;
|
|
break;
|
|
}
|
|
|
|
chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000);
|
|
chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000);
|
|
if (ca0132_quirk(spec) == QUIRK_R3DI)
|
|
chipio_set_conn_rate(codec, 0x0F, SR_96_000);
|
|
|
|
dspio_set_uint_param(codec, 0x80, 0x00, tmp);
|
|
|
|
chipio_set_stream_control(codec, 0x03, 1);
|
|
chipio_set_stream_control(codec, 0x04, 1);
|
|
switch (ca0132_quirk(spec)) {
|
|
case QUIRK_SBZ:
|
|
chipio_write(codec, 0x18B098, 0x0000000C);
|
|
chipio_write(codec, 0x18B09C, 0x0000000C);
|
|
break;
|
|
case QUIRK_ZXR:
|
|
chipio_write(codec, 0x18B098, 0x0000000C);
|
|
chipio_write(codec, 0x18B09C, 0x000000CC);
|
|
break;
|
|
case QUIRK_AE5:
|
|
chipio_write(codec, 0x18B098, 0x0000000C);
|
|
chipio_write(codec, 0x18B09C, 0x0000004C);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
ca0132_alt_mic_boost_set(codec, spec->mic_boost_enum_val);
|
|
break;
|
|
case REAR_LINE_IN:
|
|
ca0132_mic_boost_set(codec, 0);
|
|
switch (ca0132_quirk(spec)) {
|
|
case QUIRK_SBZ:
|
|
case QUIRK_R3D:
|
|
ca0113_mmio_gpio_set(codec, 0, false);
|
|
break;
|
|
case QUIRK_R3DI:
|
|
r3di_gpio_mic_set(codec, R3DI_REAR_MIC);
|
|
break;
|
|
case QUIRK_AE5:
|
|
ca0113_mmio_command_set(codec, 0x30, 0x28, 0x00);
|
|
break;
|
|
case QUIRK_AE7:
|
|
ca0113_mmio_command_set(codec, 0x30, 0x28, 0x3f);
|
|
chipio_set_conn_rate(codec, MEM_CONNID_MICIN2,
|
|
SR_96_000);
|
|
chipio_set_conn_rate(codec, MEM_CONNID_MICOUT2,
|
|
SR_96_000);
|
|
dspio_set_uint_param(codec, 0x80, 0x01, FLOAT_ZERO);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000);
|
|
chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000);
|
|
if (ca0132_quirk(spec) == QUIRK_R3DI)
|
|
chipio_set_conn_rate(codec, 0x0F, SR_96_000);
|
|
|
|
if (ca0132_quirk(spec) == QUIRK_AE7)
|
|
tmp = FLOAT_THREE;
|
|
else
|
|
tmp = FLOAT_ZERO;
|
|
dspio_set_uint_param(codec, 0x80, 0x00, tmp);
|
|
|
|
switch (ca0132_quirk(spec)) {
|
|
case QUIRK_SBZ:
|
|
case QUIRK_AE5:
|
|
chipio_write(codec, 0x18B098, 0x00000000);
|
|
chipio_write(codec, 0x18B09C, 0x00000000);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
chipio_set_stream_control(codec, 0x03, 1);
|
|
chipio_set_stream_control(codec, 0x04, 1);
|
|
break;
|
|
case FRONT_MIC:
|
|
switch (ca0132_quirk(spec)) {
|
|
case QUIRK_SBZ:
|
|
case QUIRK_R3D:
|
|
ca0113_mmio_gpio_set(codec, 0, true);
|
|
ca0113_mmio_gpio_set(codec, 5, false);
|
|
tmp = FLOAT_THREE;
|
|
break;
|
|
case QUIRK_R3DI:
|
|
r3di_gpio_mic_set(codec, R3DI_FRONT_MIC);
|
|
tmp = FLOAT_ONE;
|
|
break;
|
|
case QUIRK_AE5:
|
|
ca0113_mmio_command_set(codec, 0x30, 0x28, 0x3f);
|
|
tmp = FLOAT_THREE;
|
|
break;
|
|
default:
|
|
tmp = FLOAT_ONE;
|
|
break;
|
|
}
|
|
|
|
chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000);
|
|
chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000);
|
|
if (ca0132_quirk(spec) == QUIRK_R3DI)
|
|
chipio_set_conn_rate(codec, 0x0F, SR_96_000);
|
|
|
|
dspio_set_uint_param(codec, 0x80, 0x00, tmp);
|
|
|
|
chipio_set_stream_control(codec, 0x03, 1);
|
|
chipio_set_stream_control(codec, 0x04, 1);
|
|
|
|
switch (ca0132_quirk(spec)) {
|
|
case QUIRK_SBZ:
|
|
chipio_write(codec, 0x18B098, 0x0000000C);
|
|
chipio_write(codec, 0x18B09C, 0x000000CC);
|
|
break;
|
|
case QUIRK_AE5:
|
|
chipio_write(codec, 0x18B098, 0x0000000C);
|
|
chipio_write(codec, 0x18B09C, 0x0000004C);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
ca0132_alt_mic_boost_set(codec, spec->mic_boost_enum_val);
|
|
break;
|
|
}
|
|
ca0132_cvoice_switch_set(codec);
|
|
|
|
snd_hda_power_down_pm(codec);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Check if VNODE settings take effect immediately.
|
|
*/
|
|
static bool ca0132_is_vnode_effective(struct hda_codec *codec,
|
|
hda_nid_t vnid,
|
|
hda_nid_t *shared_nid)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
hda_nid_t nid;
|
|
|
|
switch (vnid) {
|
|
case VNID_SPK:
|
|
nid = spec->shared_out_nid;
|
|
break;
|
|
case VNID_MIC:
|
|
nid = spec->shared_mic_nid;
|
|
break;
|
|
default:
|
|
return false;
|
|
}
|
|
|
|
if (shared_nid)
|
|
*shared_nid = nid;
|
|
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
* The following functions are control change helpers.
|
|
* They return 0 if no changed. Return 1 if changed.
|
|
*/
|
|
static int ca0132_voicefx_set(struct hda_codec *codec, int enable)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
unsigned int tmp;
|
|
|
|
/* based on CrystalVoice state to enable VoiceFX. */
|
|
if (enable) {
|
|
tmp = spec->effects_switch[CRYSTAL_VOICE - EFFECT_START_NID] ?
|
|
FLOAT_ONE : FLOAT_ZERO;
|
|
} else {
|
|
tmp = FLOAT_ZERO;
|
|
}
|
|
|
|
dspio_set_uint_param(codec, ca0132_voicefx.mid,
|
|
ca0132_voicefx.reqs[0], tmp);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Set the effects parameters
|
|
*/
|
|
static int ca0132_effects_set(struct hda_codec *codec, hda_nid_t nid, long val)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
unsigned int on, tmp;
|
|
int num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT;
|
|
int err = 0;
|
|
int idx = nid - EFFECT_START_NID;
|
|
|
|
if ((idx < 0) || (idx >= num_fx))
|
|
return 0; /* no changed */
|
|
|
|
/* for out effect, qualify with PE */
|
|
if ((nid >= OUT_EFFECT_START_NID) && (nid < OUT_EFFECT_END_NID)) {
|
|
/* if PE if off, turn off out effects. */
|
|
if (!spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID])
|
|
val = 0;
|
|
if (spec->cur_out_type == SURROUND_OUT && nid == X_BASS)
|
|
val = 0;
|
|
}
|
|
|
|
/* for in effect, qualify with CrystalVoice */
|
|
if ((nid >= IN_EFFECT_START_NID) && (nid < IN_EFFECT_END_NID)) {
|
|
/* if CrystalVoice if off, turn off in effects. */
|
|
if (!spec->effects_switch[CRYSTAL_VOICE - EFFECT_START_NID])
|
|
val = 0;
|
|
|
|
/* Voice Focus applies to 2-ch Mic, Digital Mic */
|
|
if ((nid == VOICE_FOCUS) && (spec->cur_mic_type != DIGITAL_MIC))
|
|
val = 0;
|
|
|
|
/* If Voice Focus on SBZ, set to two channel. */
|
|
if ((nid == VOICE_FOCUS) && ca0132_use_pci_mmio(spec)
|
|
&& (spec->cur_mic_type != REAR_LINE_IN)) {
|
|
if (spec->effects_switch[CRYSTAL_VOICE -
|
|
EFFECT_START_NID]) {
|
|
|
|
if (spec->effects_switch[VOICE_FOCUS -
|
|
EFFECT_START_NID]) {
|
|
tmp = FLOAT_TWO;
|
|
val = 1;
|
|
} else
|
|
tmp = FLOAT_ONE;
|
|
|
|
dspio_set_uint_param(codec, 0x80, 0x00, tmp);
|
|
}
|
|
}
|
|
/*
|
|
* For SBZ noise reduction, there's an extra command
|
|
* to module ID 0x47. No clue why.
|
|
*/
|
|
if ((nid == NOISE_REDUCTION) && ca0132_use_pci_mmio(spec)
|
|
&& (spec->cur_mic_type != REAR_LINE_IN)) {
|
|
if (spec->effects_switch[CRYSTAL_VOICE -
|
|
EFFECT_START_NID]) {
|
|
if (spec->effects_switch[NOISE_REDUCTION -
|
|
EFFECT_START_NID])
|
|
tmp = FLOAT_ONE;
|
|
else
|
|
tmp = FLOAT_ZERO;
|
|
} else
|
|
tmp = FLOAT_ZERO;
|
|
|
|
dspio_set_uint_param(codec, 0x47, 0x00, tmp);
|
|
}
|
|
|
|
/* If rear line in disable effects. */
|
|
if (ca0132_use_alt_functions(spec) &&
|
|
spec->in_enum_val == REAR_LINE_IN)
|
|
val = 0;
|
|
}
|
|
|
|
codec_dbg(codec, "ca0132_effect_set: nid=0x%x, val=%ld\n",
|
|
nid, val);
|
|
|
|
on = (val == 0) ? FLOAT_ZERO : FLOAT_ONE;
|
|
err = dspio_set_uint_param(codec, ca0132_effects[idx].mid,
|
|
ca0132_effects[idx].reqs[0], on);
|
|
|
|
if (err < 0)
|
|
return 0; /* no changed */
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Turn on/off Playback Enhancements
|
|
*/
|
|
static int ca0132_pe_switch_set(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
hda_nid_t nid;
|
|
int i, ret = 0;
|
|
|
|
codec_dbg(codec, "ca0132_pe_switch_set: val=%ld\n",
|
|
spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID]);
|
|
|
|
if (ca0132_use_alt_functions(spec))
|
|
ca0132_alt_select_out(codec);
|
|
|
|
i = OUT_EFFECT_START_NID - EFFECT_START_NID;
|
|
nid = OUT_EFFECT_START_NID;
|
|
/* PE affects all out effects */
|
|
for (; nid < OUT_EFFECT_END_NID; nid++, i++)
|
|
ret |= ca0132_effects_set(codec, nid, spec->effects_switch[i]);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Check if Mic1 is streaming, if so, stop streaming */
|
|
static int stop_mic1(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
unsigned int oldval = snd_hda_codec_read(codec, spec->adcs[0], 0,
|
|
AC_VERB_GET_CONV, 0);
|
|
if (oldval != 0)
|
|
snd_hda_codec_write(codec, spec->adcs[0], 0,
|
|
AC_VERB_SET_CHANNEL_STREAMID,
|
|
0);
|
|
return oldval;
|
|
}
|
|
|
|
/* Resume Mic1 streaming if it was stopped. */
|
|
static void resume_mic1(struct hda_codec *codec, unsigned int oldval)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
/* Restore the previous stream and channel */
|
|
if (oldval != 0)
|
|
snd_hda_codec_write(codec, spec->adcs[0], 0,
|
|
AC_VERB_SET_CHANNEL_STREAMID,
|
|
oldval);
|
|
}
|
|
|
|
/*
|
|
* Turn on/off CrystalVoice
|
|
*/
|
|
static int ca0132_cvoice_switch_set(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
hda_nid_t nid;
|
|
int i, ret = 0;
|
|
unsigned int oldval;
|
|
|
|
codec_dbg(codec, "ca0132_cvoice_switch_set: val=%ld\n",
|
|
spec->effects_switch[CRYSTAL_VOICE - EFFECT_START_NID]);
|
|
|
|
i = IN_EFFECT_START_NID - EFFECT_START_NID;
|
|
nid = IN_EFFECT_START_NID;
|
|
/* CrystalVoice affects all in effects */
|
|
for (; nid < IN_EFFECT_END_NID; nid++, i++)
|
|
ret |= ca0132_effects_set(codec, nid, spec->effects_switch[i]);
|
|
|
|
/* including VoiceFX */
|
|
ret |= ca0132_voicefx_set(codec, (spec->voicefx_val ? 1 : 0));
|
|
|
|
/* set correct vipsource */
|
|
oldval = stop_mic1(codec);
|
|
if (ca0132_use_alt_functions(spec))
|
|
ret |= ca0132_alt_set_vipsource(codec, 1);
|
|
else
|
|
ret |= ca0132_set_vipsource(codec, 1);
|
|
resume_mic1(codec, oldval);
|
|
return ret;
|
|
}
|
|
|
|
static int ca0132_mic_boost_set(struct hda_codec *codec, long val)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
int ret = 0;
|
|
|
|
if (val) /* on */
|
|
ret = snd_hda_codec_amp_update(codec, spec->input_pins[0], 0,
|
|
HDA_INPUT, 0, HDA_AMP_VOLMASK, 3);
|
|
else /* off */
|
|
ret = snd_hda_codec_amp_update(codec, spec->input_pins[0], 0,
|
|
HDA_INPUT, 0, HDA_AMP_VOLMASK, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ca0132_alt_mic_boost_set(struct hda_codec *codec, long val)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
int ret = 0;
|
|
|
|
ret = snd_hda_codec_amp_update(codec, spec->input_pins[0], 0,
|
|
HDA_INPUT, 0, HDA_AMP_VOLMASK, val);
|
|
return ret;
|
|
}
|
|
|
|
static int ae5_headphone_gain_set(struct hda_codec *codec, long val)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < 4; i++)
|
|
ca0113_mmio_command_set(codec, 0x48, 0x11 + i,
|
|
ae5_headphone_gain_presets[val].vals[i]);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* gpio pin 1 is a relay that switches on/off, apparently setting the headphone
|
|
* amplifier to handle a 600 ohm load.
|
|
*/
|
|
static int zxr_headphone_gain_set(struct hda_codec *codec, long val)
|
|
{
|
|
ca0113_mmio_gpio_set(codec, 1, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ca0132_vnode_switch_set(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
hda_nid_t nid = get_amp_nid(kcontrol);
|
|
hda_nid_t shared_nid = 0;
|
|
bool effective;
|
|
int ret = 0;
|
|
struct ca0132_spec *spec = codec->spec;
|
|
int auto_jack;
|
|
|
|
if (nid == VNID_HP_SEL) {
|
|
auto_jack =
|
|
spec->vnode_lswitch[VNID_HP_ASEL - VNODE_START_NID];
|
|
if (!auto_jack) {
|
|
if (ca0132_use_alt_functions(spec))
|
|
ca0132_alt_select_out(codec);
|
|
else
|
|
ca0132_select_out(codec);
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
if (nid == VNID_AMIC1_SEL) {
|
|
auto_jack =
|
|
spec->vnode_lswitch[VNID_AMIC1_ASEL - VNODE_START_NID];
|
|
if (!auto_jack)
|
|
ca0132_select_mic(codec);
|
|
return 1;
|
|
}
|
|
|
|
if (nid == VNID_HP_ASEL) {
|
|
if (ca0132_use_alt_functions(spec))
|
|
ca0132_alt_select_out(codec);
|
|
else
|
|
ca0132_select_out(codec);
|
|
return 1;
|
|
}
|
|
|
|
if (nid == VNID_AMIC1_ASEL) {
|
|
ca0132_select_mic(codec);
|
|
return 1;
|
|
}
|
|
|
|
/* if effective conditions, then update hw immediately. */
|
|
effective = ca0132_is_vnode_effective(codec, nid, &shared_nid);
|
|
if (effective) {
|
|
int dir = get_amp_direction(kcontrol);
|
|
int ch = get_amp_channels(kcontrol);
|
|
unsigned long pval;
|
|
|
|
mutex_lock(&codec->control_mutex);
|
|
pval = kcontrol->private_value;
|
|
kcontrol->private_value = HDA_COMPOSE_AMP_VAL(shared_nid, ch,
|
|
0, dir);
|
|
ret = snd_hda_mixer_amp_switch_put(kcontrol, ucontrol);
|
|
kcontrol->private_value = pval;
|
|
mutex_unlock(&codec->control_mutex);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
/* End of control change helpers. */
|
|
/*
|
|
* Below I've added controls to mess with the effect levels, I've only enabled
|
|
* them on the Sound Blaster Z, but they would probably also work on the
|
|
* Chromebook. I figured they were probably tuned specifically for it, and left
|
|
* out for a reason.
|
|
*/
|
|
|
|
/* Sets DSP effect level from the sliders above the controls */
|
|
static int ca0132_alt_slider_ctl_set(struct hda_codec *codec, hda_nid_t nid,
|
|
const unsigned int *lookup, int idx)
|
|
{
|
|
int i = 0;
|
|
unsigned int y;
|
|
/*
|
|
* For X_BASS, req 2 is actually crossover freq instead of
|
|
* effect level
|
|
*/
|
|
if (nid == X_BASS)
|
|
y = 2;
|
|
else
|
|
y = 1;
|
|
|
|
snd_hda_power_up(codec);
|
|
if (nid == XBASS_XOVER) {
|
|
for (i = 0; i < OUT_EFFECTS_COUNT; i++)
|
|
if (ca0132_effects[i].nid == X_BASS)
|
|
break;
|
|
|
|
dspio_set_param(codec, ca0132_effects[i].mid, 0x20,
|
|
ca0132_effects[i].reqs[1],
|
|
&(lookup[idx - 1]), sizeof(unsigned int));
|
|
} else {
|
|
/* Find the actual effect structure */
|
|
for (i = 0; i < OUT_EFFECTS_COUNT; i++)
|
|
if (nid == ca0132_effects[i].nid)
|
|
break;
|
|
|
|
dspio_set_param(codec, ca0132_effects[i].mid, 0x20,
|
|
ca0132_effects[i].reqs[y],
|
|
&(lookup[idx]), sizeof(unsigned int));
|
|
}
|
|
|
|
snd_hda_power_down(codec);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ca0132_alt_xbass_xover_slider_ctl_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
long *valp = ucontrol->value.integer.value;
|
|
|
|
*valp = spec->xbass_xover_freq;
|
|
return 0;
|
|
}
|
|
|
|
static int ca0132_alt_slider_ctl_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
hda_nid_t nid = get_amp_nid(kcontrol);
|
|
long *valp = ucontrol->value.integer.value;
|
|
int idx = nid - OUT_EFFECT_START_NID;
|
|
|
|
*valp = spec->fx_ctl_val[idx];
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The X-bass crossover starts at 10hz, so the min is 1. The
|
|
* frequency is set in multiples of 10.
|
|
*/
|
|
static int ca0132_alt_xbass_xover_slider_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
|
|
uinfo->count = 1;
|
|
uinfo->value.integer.min = 1;
|
|
uinfo->value.integer.max = 100;
|
|
uinfo->value.integer.step = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ca0132_alt_effect_slider_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
int chs = get_amp_channels(kcontrol);
|
|
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
|
|
uinfo->count = chs == 3 ? 2 : 1;
|
|
uinfo->value.integer.min = 0;
|
|
uinfo->value.integer.max = 100;
|
|
uinfo->value.integer.step = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ca0132_alt_xbass_xover_slider_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
hda_nid_t nid = get_amp_nid(kcontrol);
|
|
long *valp = ucontrol->value.integer.value;
|
|
int idx;
|
|
|
|
/* any change? */
|
|
if (spec->xbass_xover_freq == *valp)
|
|
return 0;
|
|
|
|
spec->xbass_xover_freq = *valp;
|
|
|
|
idx = *valp;
|
|
ca0132_alt_slider_ctl_set(codec, nid, float_xbass_xover_lookup, idx);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ca0132_alt_effect_slider_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
hda_nid_t nid = get_amp_nid(kcontrol);
|
|
long *valp = ucontrol->value.integer.value;
|
|
int idx;
|
|
|
|
idx = nid - EFFECT_START_NID;
|
|
/* any change? */
|
|
if (spec->fx_ctl_val[idx] == *valp)
|
|
return 0;
|
|
|
|
spec->fx_ctl_val[idx] = *valp;
|
|
|
|
idx = *valp;
|
|
ca0132_alt_slider_ctl_set(codec, nid, float_zero_to_one_lookup, idx);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Mic Boost Enum for alternative ca0132 codecs. I didn't like that the original
|
|
* only has off or full 30 dB, and didn't like making a volume slider that has
|
|
* traditional 0-100 in alsamixer that goes in big steps. I like enum better.
|
|
*/
|
|
#define MIC_BOOST_NUM_OF_STEPS 4
|
|
#define MIC_BOOST_ENUM_MAX_STRLEN 10
|
|
|
|
static int ca0132_alt_mic_boost_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
char *sfx = "dB";
|
|
char namestr[SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
|
|
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
|
|
uinfo->count = 1;
|
|
uinfo->value.enumerated.items = MIC_BOOST_NUM_OF_STEPS;
|
|
if (uinfo->value.enumerated.item >= MIC_BOOST_NUM_OF_STEPS)
|
|
uinfo->value.enumerated.item = MIC_BOOST_NUM_OF_STEPS - 1;
|
|
sprintf(namestr, "%d %s", (uinfo->value.enumerated.item * 10), sfx);
|
|
strcpy(uinfo->value.enumerated.name, namestr);
|
|
return 0;
|
|
}
|
|
|
|
static int ca0132_alt_mic_boost_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
ucontrol->value.enumerated.item[0] = spec->mic_boost_enum_val;
|
|
return 0;
|
|
}
|
|
|
|
static int ca0132_alt_mic_boost_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
int sel = ucontrol->value.enumerated.item[0];
|
|
unsigned int items = MIC_BOOST_NUM_OF_STEPS;
|
|
|
|
if (sel >= items)
|
|
return 0;
|
|
|
|
codec_dbg(codec, "ca0132_alt_mic_boost: boost=%d\n",
|
|
sel);
|
|
|
|
spec->mic_boost_enum_val = sel;
|
|
|
|
if (spec->in_enum_val != REAR_LINE_IN)
|
|
ca0132_alt_mic_boost_set(codec, spec->mic_boost_enum_val);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Sound BlasterX AE-5 Headphone Gain Controls.
|
|
*/
|
|
#define AE5_HEADPHONE_GAIN_MAX 3
|
|
static int ae5_headphone_gain_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
char *sfx = " Ohms)";
|
|
char namestr[SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
|
|
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
|
|
uinfo->count = 1;
|
|
uinfo->value.enumerated.items = AE5_HEADPHONE_GAIN_MAX;
|
|
if (uinfo->value.enumerated.item >= AE5_HEADPHONE_GAIN_MAX)
|
|
uinfo->value.enumerated.item = AE5_HEADPHONE_GAIN_MAX - 1;
|
|
sprintf(namestr, "%s %s",
|
|
ae5_headphone_gain_presets[uinfo->value.enumerated.item].name,
|
|
sfx);
|
|
strcpy(uinfo->value.enumerated.name, namestr);
|
|
return 0;
|
|
}
|
|
|
|
static int ae5_headphone_gain_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
ucontrol->value.enumerated.item[0] = spec->ae5_headphone_gain_val;
|
|
return 0;
|
|
}
|
|
|
|
static int ae5_headphone_gain_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
int sel = ucontrol->value.enumerated.item[0];
|
|
unsigned int items = AE5_HEADPHONE_GAIN_MAX;
|
|
|
|
if (sel >= items)
|
|
return 0;
|
|
|
|
codec_dbg(codec, "ae5_headphone_gain: boost=%d\n",
|
|
sel);
|
|
|
|
spec->ae5_headphone_gain_val = sel;
|
|
|
|
if (spec->out_enum_val == HEADPHONE_OUT)
|
|
ae5_headphone_gain_set(codec, spec->ae5_headphone_gain_val);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Sound BlasterX AE-5 sound filter enumerated control.
|
|
*/
|
|
#define AE5_SOUND_FILTER_MAX 3
|
|
|
|
static int ae5_sound_filter_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
char namestr[SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
|
|
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
|
|
uinfo->count = 1;
|
|
uinfo->value.enumerated.items = AE5_SOUND_FILTER_MAX;
|
|
if (uinfo->value.enumerated.item >= AE5_SOUND_FILTER_MAX)
|
|
uinfo->value.enumerated.item = AE5_SOUND_FILTER_MAX - 1;
|
|
sprintf(namestr, "%s",
|
|
ae5_filter_presets[uinfo->value.enumerated.item].name);
|
|
strcpy(uinfo->value.enumerated.name, namestr);
|
|
return 0;
|
|
}
|
|
|
|
static int ae5_sound_filter_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
ucontrol->value.enumerated.item[0] = spec->ae5_filter_val;
|
|
return 0;
|
|
}
|
|
|
|
static int ae5_sound_filter_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
int sel = ucontrol->value.enumerated.item[0];
|
|
unsigned int items = AE5_SOUND_FILTER_MAX;
|
|
|
|
if (sel >= items)
|
|
return 0;
|
|
|
|
codec_dbg(codec, "ae5_sound_filter: %s\n",
|
|
ae5_filter_presets[sel].name);
|
|
|
|
spec->ae5_filter_val = sel;
|
|
|
|
ca0113_mmio_command_set_type2(codec, 0x48, 0x07,
|
|
ae5_filter_presets[sel].val);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Input Select Control for alternative ca0132 codecs. This exists because
|
|
* front microphone has no auto-detect, and we need a way to set the rear
|
|
* as line-in
|
|
*/
|
|
static int ca0132_alt_input_source_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
|
|
uinfo->count = 1;
|
|
uinfo->value.enumerated.items = IN_SRC_NUM_OF_INPUTS;
|
|
if (uinfo->value.enumerated.item >= IN_SRC_NUM_OF_INPUTS)
|
|
uinfo->value.enumerated.item = IN_SRC_NUM_OF_INPUTS - 1;
|
|
strcpy(uinfo->value.enumerated.name,
|
|
in_src_str[uinfo->value.enumerated.item]);
|
|
return 0;
|
|
}
|
|
|
|
static int ca0132_alt_input_source_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
ucontrol->value.enumerated.item[0] = spec->in_enum_val;
|
|
return 0;
|
|
}
|
|
|
|
static int ca0132_alt_input_source_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
int sel = ucontrol->value.enumerated.item[0];
|
|
unsigned int items = IN_SRC_NUM_OF_INPUTS;
|
|
|
|
if (sel >= items)
|
|
return 0;
|
|
|
|
codec_dbg(codec, "ca0132_alt_input_select: sel=%d, preset=%s\n",
|
|
sel, in_src_str[sel]);
|
|
|
|
spec->in_enum_val = sel;
|
|
|
|
ca0132_alt_select_in(codec);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/* Sound Blaster Z Output Select Control */
|
|
static int ca0132_alt_output_select_get_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
|
|
uinfo->count = 1;
|
|
uinfo->value.enumerated.items = NUM_OF_OUTPUTS;
|
|
if (uinfo->value.enumerated.item >= NUM_OF_OUTPUTS)
|
|
uinfo->value.enumerated.item = NUM_OF_OUTPUTS - 1;
|
|
strcpy(uinfo->value.enumerated.name,
|
|
alt_out_presets[uinfo->value.enumerated.item].name);
|
|
return 0;
|
|
}
|
|
|
|
static int ca0132_alt_output_select_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
ucontrol->value.enumerated.item[0] = spec->out_enum_val;
|
|
return 0;
|
|
}
|
|
|
|
static int ca0132_alt_output_select_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
int sel = ucontrol->value.enumerated.item[0];
|
|
unsigned int items = NUM_OF_OUTPUTS;
|
|
unsigned int auto_jack;
|
|
|
|
if (sel >= items)
|
|
return 0;
|
|
|
|
codec_dbg(codec, "ca0132_alt_output_select: sel=%d, preset=%s\n",
|
|
sel, alt_out_presets[sel].name);
|
|
|
|
spec->out_enum_val = sel;
|
|
|
|
auto_jack = spec->vnode_lswitch[VNID_HP_ASEL - VNODE_START_NID];
|
|
|
|
if (!auto_jack)
|
|
ca0132_alt_select_out(codec);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Smart Volume output setting control. Three different settings, Normal,
|
|
* which takes the value from the smart volume slider. The two others, loud
|
|
* and night, disregard the slider value and have uneditable values.
|
|
*/
|
|
#define NUM_OF_SVM_SETTINGS 3
|
|
static const char *const out_svm_set_enum_str[3] = {"Normal", "Loud", "Night" };
|
|
|
|
static int ca0132_alt_svm_setting_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
|
|
uinfo->count = 1;
|
|
uinfo->value.enumerated.items = NUM_OF_SVM_SETTINGS;
|
|
if (uinfo->value.enumerated.item >= NUM_OF_SVM_SETTINGS)
|
|
uinfo->value.enumerated.item = NUM_OF_SVM_SETTINGS - 1;
|
|
strcpy(uinfo->value.enumerated.name,
|
|
out_svm_set_enum_str[uinfo->value.enumerated.item]);
|
|
return 0;
|
|
}
|
|
|
|
static int ca0132_alt_svm_setting_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
ucontrol->value.enumerated.item[0] = spec->smart_volume_setting;
|
|
return 0;
|
|
}
|
|
|
|
static int ca0132_alt_svm_setting_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
int sel = ucontrol->value.enumerated.item[0];
|
|
unsigned int items = NUM_OF_SVM_SETTINGS;
|
|
unsigned int idx = SMART_VOLUME - EFFECT_START_NID;
|
|
unsigned int tmp;
|
|
|
|
if (sel >= items)
|
|
return 0;
|
|
|
|
codec_dbg(codec, "ca0132_alt_svm_setting: sel=%d, preset=%s\n",
|
|
sel, out_svm_set_enum_str[sel]);
|
|
|
|
spec->smart_volume_setting = sel;
|
|
|
|
switch (sel) {
|
|
case 0:
|
|
tmp = FLOAT_ZERO;
|
|
break;
|
|
case 1:
|
|
tmp = FLOAT_ONE;
|
|
break;
|
|
case 2:
|
|
tmp = FLOAT_TWO;
|
|
break;
|
|
default:
|
|
tmp = FLOAT_ZERO;
|
|
break;
|
|
}
|
|
/* Req 2 is the Smart Volume Setting req. */
|
|
dspio_set_uint_param(codec, ca0132_effects[idx].mid,
|
|
ca0132_effects[idx].reqs[2], tmp);
|
|
return 1;
|
|
}
|
|
|
|
/* Sound Blaster Z EQ preset controls */
|
|
static int ca0132_alt_eq_preset_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
unsigned int items = ARRAY_SIZE(ca0132_alt_eq_presets);
|
|
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
|
|
uinfo->count = 1;
|
|
uinfo->value.enumerated.items = items;
|
|
if (uinfo->value.enumerated.item >= items)
|
|
uinfo->value.enumerated.item = items - 1;
|
|
strcpy(uinfo->value.enumerated.name,
|
|
ca0132_alt_eq_presets[uinfo->value.enumerated.item].name);
|
|
return 0;
|
|
}
|
|
|
|
static int ca0132_alt_eq_preset_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
ucontrol->value.enumerated.item[0] = spec->eq_preset_val;
|
|
return 0;
|
|
}
|
|
|
|
static int ca0132_alt_eq_preset_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
int i, err = 0;
|
|
int sel = ucontrol->value.enumerated.item[0];
|
|
unsigned int items = ARRAY_SIZE(ca0132_alt_eq_presets);
|
|
|
|
if (sel >= items)
|
|
return 0;
|
|
|
|
codec_dbg(codec, "%s: sel=%d, preset=%s\n", __func__, sel,
|
|
ca0132_alt_eq_presets[sel].name);
|
|
/*
|
|
* Idx 0 is default.
|
|
* Default needs to qualify with CrystalVoice state.
|
|
*/
|
|
for (i = 0; i < EQ_PRESET_MAX_PARAM_COUNT; i++) {
|
|
err = dspio_set_uint_param(codec, ca0132_alt_eq_enum.mid,
|
|
ca0132_alt_eq_enum.reqs[i],
|
|
ca0132_alt_eq_presets[sel].vals[i]);
|
|
if (err < 0)
|
|
break;
|
|
}
|
|
|
|
if (err >= 0)
|
|
spec->eq_preset_val = sel;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int ca0132_voicefx_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
unsigned int items = ARRAY_SIZE(ca0132_voicefx_presets);
|
|
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
|
|
uinfo->count = 1;
|
|
uinfo->value.enumerated.items = items;
|
|
if (uinfo->value.enumerated.item >= items)
|
|
uinfo->value.enumerated.item = items - 1;
|
|
strcpy(uinfo->value.enumerated.name,
|
|
ca0132_voicefx_presets[uinfo->value.enumerated.item].name);
|
|
return 0;
|
|
}
|
|
|
|
static int ca0132_voicefx_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
ucontrol->value.enumerated.item[0] = spec->voicefx_val;
|
|
return 0;
|
|
}
|
|
|
|
static int ca0132_voicefx_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
int i, err = 0;
|
|
int sel = ucontrol->value.enumerated.item[0];
|
|
|
|
if (sel >= ARRAY_SIZE(ca0132_voicefx_presets))
|
|
return 0;
|
|
|
|
codec_dbg(codec, "ca0132_voicefx_put: sel=%d, preset=%s\n",
|
|
sel, ca0132_voicefx_presets[sel].name);
|
|
|
|
/*
|
|
* Idx 0 is default.
|
|
* Default needs to qualify with CrystalVoice state.
|
|
*/
|
|
for (i = 0; i < VOICEFX_MAX_PARAM_COUNT; i++) {
|
|
err = dspio_set_uint_param(codec, ca0132_voicefx.mid,
|
|
ca0132_voicefx.reqs[i],
|
|
ca0132_voicefx_presets[sel].vals[i]);
|
|
if (err < 0)
|
|
break;
|
|
}
|
|
|
|
if (err >= 0) {
|
|
spec->voicefx_val = sel;
|
|
/* enable voice fx */
|
|
ca0132_voicefx_set(codec, (sel ? 1 : 0));
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int ca0132_switch_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
hda_nid_t nid = get_amp_nid(kcontrol);
|
|
int ch = get_amp_channels(kcontrol);
|
|
long *valp = ucontrol->value.integer.value;
|
|
|
|
/* vnode */
|
|
if ((nid >= VNODE_START_NID) && (nid < VNODE_END_NID)) {
|
|
if (ch & 1) {
|
|
*valp = spec->vnode_lswitch[nid - VNODE_START_NID];
|
|
valp++;
|
|
}
|
|
if (ch & 2) {
|
|
*valp = spec->vnode_rswitch[nid - VNODE_START_NID];
|
|
valp++;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* effects, include PE and CrystalVoice */
|
|
if ((nid >= EFFECT_START_NID) && (nid < EFFECT_END_NID)) {
|
|
*valp = spec->effects_switch[nid - EFFECT_START_NID];
|
|
return 0;
|
|
}
|
|
|
|
/* mic boost */
|
|
if (nid == spec->input_pins[0]) {
|
|
*valp = spec->cur_mic_boost;
|
|
return 0;
|
|
}
|
|
|
|
if (nid == ZXR_HEADPHONE_GAIN) {
|
|
*valp = spec->zxr_gain_set;
|
|
return 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ca0132_switch_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
hda_nid_t nid = get_amp_nid(kcontrol);
|
|
int ch = get_amp_channels(kcontrol);
|
|
long *valp = ucontrol->value.integer.value;
|
|
int changed = 1;
|
|
|
|
codec_dbg(codec, "ca0132_switch_put: nid=0x%x, val=%ld\n",
|
|
nid, *valp);
|
|
|
|
snd_hda_power_up(codec);
|
|
/* vnode */
|
|
if ((nid >= VNODE_START_NID) && (nid < VNODE_END_NID)) {
|
|
if (ch & 1) {
|
|
spec->vnode_lswitch[nid - VNODE_START_NID] = *valp;
|
|
valp++;
|
|
}
|
|
if (ch & 2) {
|
|
spec->vnode_rswitch[nid - VNODE_START_NID] = *valp;
|
|
valp++;
|
|
}
|
|
changed = ca0132_vnode_switch_set(kcontrol, ucontrol);
|
|
goto exit;
|
|
}
|
|
|
|
/* PE */
|
|
if (nid == PLAY_ENHANCEMENT) {
|
|
spec->effects_switch[nid - EFFECT_START_NID] = *valp;
|
|
changed = ca0132_pe_switch_set(codec);
|
|
goto exit;
|
|
}
|
|
|
|
/* CrystalVoice */
|
|
if (nid == CRYSTAL_VOICE) {
|
|
spec->effects_switch[nid - EFFECT_START_NID] = *valp;
|
|
changed = ca0132_cvoice_switch_set(codec);
|
|
goto exit;
|
|
}
|
|
|
|
/* out and in effects */
|
|
if (((nid >= OUT_EFFECT_START_NID) && (nid < OUT_EFFECT_END_NID)) ||
|
|
((nid >= IN_EFFECT_START_NID) && (nid < IN_EFFECT_END_NID))) {
|
|
spec->effects_switch[nid - EFFECT_START_NID] = *valp;
|
|
changed = ca0132_effects_set(codec, nid, *valp);
|
|
goto exit;
|
|
}
|
|
|
|
/* mic boost */
|
|
if (nid == spec->input_pins[0]) {
|
|
spec->cur_mic_boost = *valp;
|
|
if (ca0132_use_alt_functions(spec)) {
|
|
if (spec->in_enum_val != REAR_LINE_IN)
|
|
changed = ca0132_mic_boost_set(codec, *valp);
|
|
} else {
|
|
/* Mic boost does not apply to Digital Mic */
|
|
if (spec->cur_mic_type != DIGITAL_MIC)
|
|
changed = ca0132_mic_boost_set(codec, *valp);
|
|
}
|
|
|
|
goto exit;
|
|
}
|
|
|
|
if (nid == ZXR_HEADPHONE_GAIN) {
|
|
spec->zxr_gain_set = *valp;
|
|
if (spec->cur_out_type == HEADPHONE_OUT)
|
|
changed = zxr_headphone_gain_set(codec, *valp);
|
|
else
|
|
changed = 0;
|
|
|
|
goto exit;
|
|
}
|
|
|
|
exit:
|
|
snd_hda_power_down(codec);
|
|
return changed;
|
|
}
|
|
|
|
/*
|
|
* Volume related
|
|
*/
|
|
/*
|
|
* Sets the internal DSP decibel level to match the DAC for output, and the
|
|
* ADC for input. Currently only the SBZ sets dsp capture volume level, and
|
|
* all alternative codecs set DSP playback volume.
|
|
*/
|
|
static void ca0132_alt_dsp_volume_put(struct hda_codec *codec, hda_nid_t nid)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
unsigned int dsp_dir;
|
|
unsigned int lookup_val;
|
|
|
|
if (nid == VNID_SPK)
|
|
dsp_dir = DSP_VOL_OUT;
|
|
else
|
|
dsp_dir = DSP_VOL_IN;
|
|
|
|
lookup_val = spec->vnode_lvol[nid - VNODE_START_NID];
|
|
|
|
dspio_set_uint_param(codec,
|
|
ca0132_alt_vol_ctls[dsp_dir].mid,
|
|
ca0132_alt_vol_ctls[dsp_dir].reqs[0],
|
|
float_vol_db_lookup[lookup_val]);
|
|
|
|
lookup_val = spec->vnode_rvol[nid - VNODE_START_NID];
|
|
|
|
dspio_set_uint_param(codec,
|
|
ca0132_alt_vol_ctls[dsp_dir].mid,
|
|
ca0132_alt_vol_ctls[dsp_dir].reqs[1],
|
|
float_vol_db_lookup[lookup_val]);
|
|
|
|
dspio_set_uint_param(codec,
|
|
ca0132_alt_vol_ctls[dsp_dir].mid,
|
|
ca0132_alt_vol_ctls[dsp_dir].reqs[2], FLOAT_ZERO);
|
|
}
|
|
|
|
static int ca0132_volume_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
hda_nid_t nid = get_amp_nid(kcontrol);
|
|
int ch = get_amp_channels(kcontrol);
|
|
int dir = get_amp_direction(kcontrol);
|
|
unsigned long pval;
|
|
int err;
|
|
|
|
switch (nid) {
|
|
case VNID_SPK:
|
|
/* follow shared_out info */
|
|
nid = spec->shared_out_nid;
|
|
mutex_lock(&codec->control_mutex);
|
|
pval = kcontrol->private_value;
|
|
kcontrol->private_value = HDA_COMPOSE_AMP_VAL(nid, ch, 0, dir);
|
|
err = snd_hda_mixer_amp_volume_info(kcontrol, uinfo);
|
|
kcontrol->private_value = pval;
|
|
mutex_unlock(&codec->control_mutex);
|
|
break;
|
|
case VNID_MIC:
|
|
/* follow shared_mic info */
|
|
nid = spec->shared_mic_nid;
|
|
mutex_lock(&codec->control_mutex);
|
|
pval = kcontrol->private_value;
|
|
kcontrol->private_value = HDA_COMPOSE_AMP_VAL(nid, ch, 0, dir);
|
|
err = snd_hda_mixer_amp_volume_info(kcontrol, uinfo);
|
|
kcontrol->private_value = pval;
|
|
mutex_unlock(&codec->control_mutex);
|
|
break;
|
|
default:
|
|
err = snd_hda_mixer_amp_volume_info(kcontrol, uinfo);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static int ca0132_volume_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
hda_nid_t nid = get_amp_nid(kcontrol);
|
|
int ch = get_amp_channels(kcontrol);
|
|
long *valp = ucontrol->value.integer.value;
|
|
|
|
/* store the left and right volume */
|
|
if (ch & 1) {
|
|
*valp = spec->vnode_lvol[nid - VNODE_START_NID];
|
|
valp++;
|
|
}
|
|
if (ch & 2) {
|
|
*valp = spec->vnode_rvol[nid - VNODE_START_NID];
|
|
valp++;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int ca0132_volume_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
hda_nid_t nid = get_amp_nid(kcontrol);
|
|
int ch = get_amp_channels(kcontrol);
|
|
long *valp = ucontrol->value.integer.value;
|
|
hda_nid_t shared_nid = 0;
|
|
bool effective;
|
|
int changed = 1;
|
|
|
|
/* store the left and right volume */
|
|
if (ch & 1) {
|
|
spec->vnode_lvol[nid - VNODE_START_NID] = *valp;
|
|
valp++;
|
|
}
|
|
if (ch & 2) {
|
|
spec->vnode_rvol[nid - VNODE_START_NID] = *valp;
|
|
valp++;
|
|
}
|
|
|
|
/* if effective conditions, then update hw immediately. */
|
|
effective = ca0132_is_vnode_effective(codec, nid, &shared_nid);
|
|
if (effective) {
|
|
int dir = get_amp_direction(kcontrol);
|
|
unsigned long pval;
|
|
|
|
snd_hda_power_up(codec);
|
|
mutex_lock(&codec->control_mutex);
|
|
pval = kcontrol->private_value;
|
|
kcontrol->private_value = HDA_COMPOSE_AMP_VAL(shared_nid, ch,
|
|
0, dir);
|
|
changed = snd_hda_mixer_amp_volume_put(kcontrol, ucontrol);
|
|
kcontrol->private_value = pval;
|
|
mutex_unlock(&codec->control_mutex);
|
|
snd_hda_power_down(codec);
|
|
}
|
|
|
|
return changed;
|
|
}
|
|
|
|
/*
|
|
* This function is the same as the one above, because using an if statement
|
|
* inside of the above volume control for the DSP volume would cause too much
|
|
* lag. This is a lot more smooth.
|
|
*/
|
|
static int ca0132_alt_volume_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
hda_nid_t nid = get_amp_nid(kcontrol);
|
|
int ch = get_amp_channels(kcontrol);
|
|
long *valp = ucontrol->value.integer.value;
|
|
hda_nid_t vnid = 0;
|
|
int changed;
|
|
|
|
switch (nid) {
|
|
case 0x02:
|
|
vnid = VNID_SPK;
|
|
break;
|
|
case 0x07:
|
|
vnid = VNID_MIC;
|
|
break;
|
|
}
|
|
|
|
/* store the left and right volume */
|
|
if (ch & 1) {
|
|
spec->vnode_lvol[vnid - VNODE_START_NID] = *valp;
|
|
valp++;
|
|
}
|
|
if (ch & 2) {
|
|
spec->vnode_rvol[vnid - VNODE_START_NID] = *valp;
|
|
valp++;
|
|
}
|
|
|
|
snd_hda_power_up(codec);
|
|
ca0132_alt_dsp_volume_put(codec, vnid);
|
|
mutex_lock(&codec->control_mutex);
|
|
changed = snd_hda_mixer_amp_volume_put(kcontrol, ucontrol);
|
|
mutex_unlock(&codec->control_mutex);
|
|
snd_hda_power_down(codec);
|
|
|
|
return changed;
|
|
}
|
|
|
|
static int ca0132_volume_tlv(struct snd_kcontrol *kcontrol, int op_flag,
|
|
unsigned int size, unsigned int __user *tlv)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct ca0132_spec *spec = codec->spec;
|
|
hda_nid_t nid = get_amp_nid(kcontrol);
|
|
int ch = get_amp_channels(kcontrol);
|
|
int dir = get_amp_direction(kcontrol);
|
|
unsigned long pval;
|
|
int err;
|
|
|
|
switch (nid) {
|
|
case VNID_SPK:
|
|
/* follow shared_out tlv */
|
|
nid = spec->shared_out_nid;
|
|
mutex_lock(&codec->control_mutex);
|
|
pval = kcontrol->private_value;
|
|
kcontrol->private_value = HDA_COMPOSE_AMP_VAL(nid, ch, 0, dir);
|
|
err = snd_hda_mixer_amp_tlv(kcontrol, op_flag, size, tlv);
|
|
kcontrol->private_value = pval;
|
|
mutex_unlock(&codec->control_mutex);
|
|
break;
|
|
case VNID_MIC:
|
|
/* follow shared_mic tlv */
|
|
nid = spec->shared_mic_nid;
|
|
mutex_lock(&codec->control_mutex);
|
|
pval = kcontrol->private_value;
|
|
kcontrol->private_value = HDA_COMPOSE_AMP_VAL(nid, ch, 0, dir);
|
|
err = snd_hda_mixer_amp_tlv(kcontrol, op_flag, size, tlv);
|
|
kcontrol->private_value = pval;
|
|
mutex_unlock(&codec->control_mutex);
|
|
break;
|
|
default:
|
|
err = snd_hda_mixer_amp_tlv(kcontrol, op_flag, size, tlv);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
/* Add volume slider control for effect level */
|
|
static int ca0132_alt_add_effect_slider(struct hda_codec *codec, hda_nid_t nid,
|
|
const char *pfx, int dir)
|
|
{
|
|
char namestr[SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
|
|
int type = dir ? HDA_INPUT : HDA_OUTPUT;
|
|
struct snd_kcontrol_new knew =
|
|
HDA_CODEC_VOLUME_MONO(namestr, nid, 1, 0, type);
|
|
|
|
sprintf(namestr, "FX: %s %s Volume", pfx, dirstr[dir]);
|
|
|
|
knew.tlv.c = NULL;
|
|
|
|
switch (nid) {
|
|
case XBASS_XOVER:
|
|
knew.info = ca0132_alt_xbass_xover_slider_info;
|
|
knew.get = ca0132_alt_xbass_xover_slider_ctl_get;
|
|
knew.put = ca0132_alt_xbass_xover_slider_put;
|
|
break;
|
|
default:
|
|
knew.info = ca0132_alt_effect_slider_info;
|
|
knew.get = ca0132_alt_slider_ctl_get;
|
|
knew.put = ca0132_alt_effect_slider_put;
|
|
knew.private_value =
|
|
HDA_COMPOSE_AMP_VAL(nid, 1, 0, type);
|
|
break;
|
|
}
|
|
|
|
return snd_hda_ctl_add(codec, nid, snd_ctl_new1(&knew, codec));
|
|
}
|
|
|
|
/*
|
|
* Added FX: prefix for the alternative codecs, because otherwise the surround
|
|
* effect would conflict with the Surround sound volume control. Also seems more
|
|
* clear as to what the switches do. Left alone for others.
|
|
*/
|
|
static int add_fx_switch(struct hda_codec *codec, hda_nid_t nid,
|
|
const char *pfx, int dir)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
char namestr[SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
|
|
int type = dir ? HDA_INPUT : HDA_OUTPUT;
|
|
struct snd_kcontrol_new knew =
|
|
CA0132_CODEC_MUTE_MONO(namestr, nid, 1, type);
|
|
/* If using alt_controls, add FX: prefix. But, don't add FX:
|
|
* prefix to OutFX or InFX enable controls.
|
|
*/
|
|
if (ca0132_use_alt_controls(spec) && (nid <= IN_EFFECT_END_NID))
|
|
sprintf(namestr, "FX: %s %s Switch", pfx, dirstr[dir]);
|
|
else
|
|
sprintf(namestr, "%s %s Switch", pfx, dirstr[dir]);
|
|
|
|
return snd_hda_ctl_add(codec, nid, snd_ctl_new1(&knew, codec));
|
|
}
|
|
|
|
static int add_voicefx(struct hda_codec *codec)
|
|
{
|
|
struct snd_kcontrol_new knew =
|
|
HDA_CODEC_MUTE_MONO(ca0132_voicefx.name,
|
|
VOICEFX, 1, 0, HDA_INPUT);
|
|
knew.info = ca0132_voicefx_info;
|
|
knew.get = ca0132_voicefx_get;
|
|
knew.put = ca0132_voicefx_put;
|
|
return snd_hda_ctl_add(codec, VOICEFX, snd_ctl_new1(&knew, codec));
|
|
}
|
|
|
|
/* Create the EQ Preset control */
|
|
static int add_ca0132_alt_eq_presets(struct hda_codec *codec)
|
|
{
|
|
struct snd_kcontrol_new knew =
|
|
HDA_CODEC_MUTE_MONO(ca0132_alt_eq_enum.name,
|
|
EQ_PRESET_ENUM, 1, 0, HDA_OUTPUT);
|
|
knew.info = ca0132_alt_eq_preset_info;
|
|
knew.get = ca0132_alt_eq_preset_get;
|
|
knew.put = ca0132_alt_eq_preset_put;
|
|
return snd_hda_ctl_add(codec, EQ_PRESET_ENUM,
|
|
snd_ctl_new1(&knew, codec));
|
|
}
|
|
|
|
/*
|
|
* Add enumerated control for the three different settings of the smart volume
|
|
* output effect. Normal just uses the slider value, and loud and night are
|
|
* their own things that ignore that value.
|
|
*/
|
|
static int ca0132_alt_add_svm_enum(struct hda_codec *codec)
|
|
{
|
|
struct snd_kcontrol_new knew =
|
|
HDA_CODEC_MUTE_MONO("FX: Smart Volume Setting",
|
|
SMART_VOLUME_ENUM, 1, 0, HDA_OUTPUT);
|
|
knew.info = ca0132_alt_svm_setting_info;
|
|
knew.get = ca0132_alt_svm_setting_get;
|
|
knew.put = ca0132_alt_svm_setting_put;
|
|
return snd_hda_ctl_add(codec, SMART_VOLUME_ENUM,
|
|
snd_ctl_new1(&knew, codec));
|
|
|
|
}
|
|
|
|
/*
|
|
* Create an Output Select enumerated control for codecs with surround
|
|
* out capabilities.
|
|
*/
|
|
static int ca0132_alt_add_output_enum(struct hda_codec *codec)
|
|
{
|
|
struct snd_kcontrol_new knew =
|
|
HDA_CODEC_MUTE_MONO("Output Select",
|
|
OUTPUT_SOURCE_ENUM, 1, 0, HDA_OUTPUT);
|
|
knew.info = ca0132_alt_output_select_get_info;
|
|
knew.get = ca0132_alt_output_select_get;
|
|
knew.put = ca0132_alt_output_select_put;
|
|
return snd_hda_ctl_add(codec, OUTPUT_SOURCE_ENUM,
|
|
snd_ctl_new1(&knew, codec));
|
|
}
|
|
|
|
/*
|
|
* Create an Input Source enumerated control for the alternate ca0132 codecs
|
|
* because the front microphone has no auto-detect, and Line-in has to be set
|
|
* somehow.
|
|
*/
|
|
static int ca0132_alt_add_input_enum(struct hda_codec *codec)
|
|
{
|
|
struct snd_kcontrol_new knew =
|
|
HDA_CODEC_MUTE_MONO("Input Source",
|
|
INPUT_SOURCE_ENUM, 1, 0, HDA_INPUT);
|
|
knew.info = ca0132_alt_input_source_info;
|
|
knew.get = ca0132_alt_input_source_get;
|
|
knew.put = ca0132_alt_input_source_put;
|
|
return snd_hda_ctl_add(codec, INPUT_SOURCE_ENUM,
|
|
snd_ctl_new1(&knew, codec));
|
|
}
|
|
|
|
/*
|
|
* Add mic boost enumerated control. Switches through 0dB to 30dB. This adds
|
|
* more control than the original mic boost, which is either full 30dB or off.
|
|
*/
|
|
static int ca0132_alt_add_mic_boost_enum(struct hda_codec *codec)
|
|
{
|
|
struct snd_kcontrol_new knew =
|
|
HDA_CODEC_MUTE_MONO("Mic Boost Capture Switch",
|
|
MIC_BOOST_ENUM, 1, 0, HDA_INPUT);
|
|
knew.info = ca0132_alt_mic_boost_info;
|
|
knew.get = ca0132_alt_mic_boost_get;
|
|
knew.put = ca0132_alt_mic_boost_put;
|
|
return snd_hda_ctl_add(codec, MIC_BOOST_ENUM,
|
|
snd_ctl_new1(&knew, codec));
|
|
|
|
}
|
|
|
|
/*
|
|
* Add headphone gain enumerated control for the AE-5. This switches between
|
|
* three modes, low, medium, and high. When non-headphone outputs are selected,
|
|
* it is automatically set to high. This is the same behavior as Windows.
|
|
*/
|
|
static int ae5_add_headphone_gain_enum(struct hda_codec *codec)
|
|
{
|
|
struct snd_kcontrol_new knew =
|
|
HDA_CODEC_MUTE_MONO("AE-5: Headphone Gain",
|
|
AE5_HEADPHONE_GAIN_ENUM, 1, 0, HDA_OUTPUT);
|
|
knew.info = ae5_headphone_gain_info;
|
|
knew.get = ae5_headphone_gain_get;
|
|
knew.put = ae5_headphone_gain_put;
|
|
return snd_hda_ctl_add(codec, AE5_HEADPHONE_GAIN_ENUM,
|
|
snd_ctl_new1(&knew, codec));
|
|
}
|
|
|
|
/*
|
|
* Add sound filter enumerated control for the AE-5. This adds three different
|
|
* settings: Slow Roll Off, Minimum Phase, and Fast Roll Off. From what I've
|
|
* read into it, it changes the DAC's interpolation filter.
|
|
*/
|
|
static int ae5_add_sound_filter_enum(struct hda_codec *codec)
|
|
{
|
|
struct snd_kcontrol_new knew =
|
|
HDA_CODEC_MUTE_MONO("AE-5: Sound Filter",
|
|
AE5_SOUND_FILTER_ENUM, 1, 0, HDA_OUTPUT);
|
|
knew.info = ae5_sound_filter_info;
|
|
knew.get = ae5_sound_filter_get;
|
|
knew.put = ae5_sound_filter_put;
|
|
return snd_hda_ctl_add(codec, AE5_SOUND_FILTER_ENUM,
|
|
snd_ctl_new1(&knew, codec));
|
|
}
|
|
|
|
static int zxr_add_headphone_gain_switch(struct hda_codec *codec)
|
|
{
|
|
struct snd_kcontrol_new knew =
|
|
CA0132_CODEC_MUTE_MONO("ZxR: 600 Ohm Gain",
|
|
ZXR_HEADPHONE_GAIN, 1, HDA_OUTPUT);
|
|
|
|
return snd_hda_ctl_add(codec, ZXR_HEADPHONE_GAIN,
|
|
snd_ctl_new1(&knew, codec));
|
|
}
|
|
|
|
/*
|
|
* Need to create slave controls for the alternate codecs that have surround
|
|
* capabilities.
|
|
*/
|
|
static const char * const ca0132_alt_slave_pfxs[] = {
|
|
"Front", "Surround", "Center", "LFE", NULL,
|
|
};
|
|
|
|
/*
|
|
* Also need special channel map, because the default one is incorrect.
|
|
* I think this has to do with the pin for rear surround being 0x11,
|
|
* and the center/lfe being 0x10. Usually the pin order is the opposite.
|
|
*/
|
|
static const struct snd_pcm_chmap_elem ca0132_alt_chmaps[] = {
|
|
{ .channels = 2,
|
|
.map = { SNDRV_CHMAP_FL, SNDRV_CHMAP_FR } },
|
|
{ .channels = 4,
|
|
.map = { SNDRV_CHMAP_FL, SNDRV_CHMAP_FR,
|
|
SNDRV_CHMAP_RL, SNDRV_CHMAP_RR } },
|
|
{ .channels = 6,
|
|
.map = { SNDRV_CHMAP_FL, SNDRV_CHMAP_FR,
|
|
SNDRV_CHMAP_FC, SNDRV_CHMAP_LFE,
|
|
SNDRV_CHMAP_RL, SNDRV_CHMAP_RR } },
|
|
{ }
|
|
};
|
|
|
|
/* Add the correct chmap for streams with 6 channels. */
|
|
static void ca0132_alt_add_chmap_ctls(struct hda_codec *codec)
|
|
{
|
|
int err = 0;
|
|
struct hda_pcm *pcm;
|
|
|
|
list_for_each_entry(pcm, &codec->pcm_list_head, list) {
|
|
struct hda_pcm_stream *hinfo =
|
|
&pcm->stream[SNDRV_PCM_STREAM_PLAYBACK];
|
|
struct snd_pcm_chmap *chmap;
|
|
const struct snd_pcm_chmap_elem *elem;
|
|
|
|
elem = ca0132_alt_chmaps;
|
|
if (hinfo->channels_max == 6) {
|
|
err = snd_pcm_add_chmap_ctls(pcm->pcm,
|
|
SNDRV_PCM_STREAM_PLAYBACK,
|
|
elem, hinfo->channels_max, 0, &chmap);
|
|
if (err < 0)
|
|
codec_dbg(codec, "snd_pcm_add_chmap_ctls failed!");
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* When changing Node IDs for Mixer Controls below, make sure to update
|
|
* Node IDs in ca0132_config() as well.
|
|
*/
|
|
static const struct snd_kcontrol_new ca0132_mixer[] = {
|
|
CA0132_CODEC_VOL("Master Playback Volume", VNID_SPK, HDA_OUTPUT),
|
|
CA0132_CODEC_MUTE("Master Playback Switch", VNID_SPK, HDA_OUTPUT),
|
|
CA0132_CODEC_VOL("Capture Volume", VNID_MIC, HDA_INPUT),
|
|
CA0132_CODEC_MUTE("Capture Switch", VNID_MIC, HDA_INPUT),
|
|
HDA_CODEC_VOLUME("Analog-Mic2 Capture Volume", 0x08, 0, HDA_INPUT),
|
|
HDA_CODEC_MUTE("Analog-Mic2 Capture Switch", 0x08, 0, HDA_INPUT),
|
|
HDA_CODEC_VOLUME("What U Hear Capture Volume", 0x0a, 0, HDA_INPUT),
|
|
HDA_CODEC_MUTE("What U Hear Capture Switch", 0x0a, 0, HDA_INPUT),
|
|
CA0132_CODEC_MUTE_MONO("Mic1-Boost (30dB) Capture Switch",
|
|
0x12, 1, HDA_INPUT),
|
|
CA0132_CODEC_MUTE_MONO("HP/Speaker Playback Switch",
|
|
VNID_HP_SEL, 1, HDA_OUTPUT),
|
|
CA0132_CODEC_MUTE_MONO("AMic1/DMic Capture Switch",
|
|
VNID_AMIC1_SEL, 1, HDA_INPUT),
|
|
CA0132_CODEC_MUTE_MONO("HP/Speaker Auto Detect Playback Switch",
|
|
VNID_HP_ASEL, 1, HDA_OUTPUT),
|
|
CA0132_CODEC_MUTE_MONO("AMic1/DMic Auto Detect Capture Switch",
|
|
VNID_AMIC1_ASEL, 1, HDA_INPUT),
|
|
{ } /* end */
|
|
};
|
|
|
|
/*
|
|
* Desktop specific control mixer. Removes auto-detect for mic, and adds
|
|
* surround controls. Also sets both the Front Playback and Capture Volume
|
|
* controls to alt so they set the DSP's decibel level.
|
|
*/
|
|
static const struct snd_kcontrol_new desktop_mixer[] = {
|
|
CA0132_ALT_CODEC_VOL("Front Playback Volume", 0x02, HDA_OUTPUT),
|
|
CA0132_CODEC_MUTE("Front Playback Switch", VNID_SPK, HDA_OUTPUT),
|
|
HDA_CODEC_VOLUME("Surround Playback Volume", 0x04, 0, HDA_OUTPUT),
|
|
HDA_CODEC_MUTE("Surround Playback Switch", 0x04, 0, HDA_OUTPUT),
|
|
HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x03, 1, 0, HDA_OUTPUT),
|
|
HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x03, 1, 0, HDA_OUTPUT),
|
|
HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x03, 2, 0, HDA_OUTPUT),
|
|
HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x03, 2, 0, HDA_OUTPUT),
|
|
CA0132_ALT_CODEC_VOL("Capture Volume", 0x07, HDA_INPUT),
|
|
CA0132_CODEC_MUTE("Capture Switch", VNID_MIC, HDA_INPUT),
|
|
HDA_CODEC_VOLUME("What U Hear Capture Volume", 0x0a, 0, HDA_INPUT),
|
|
HDA_CODEC_MUTE("What U Hear Capture Switch", 0x0a, 0, HDA_INPUT),
|
|
CA0132_CODEC_MUTE_MONO("HP/Speaker Auto Detect Playback Switch",
|
|
VNID_HP_ASEL, 1, HDA_OUTPUT),
|
|
{ } /* end */
|
|
};
|
|
|
|
/*
|
|
* Same as the Sound Blaster Z, except doesn't use the alt volume for capture
|
|
* because it doesn't set decibel levels for the DSP for capture.
|
|
*/
|
|
static const struct snd_kcontrol_new r3di_mixer[] = {
|
|
CA0132_ALT_CODEC_VOL("Front Playback Volume", 0x02, HDA_OUTPUT),
|
|
CA0132_CODEC_MUTE("Front Playback Switch", VNID_SPK, HDA_OUTPUT),
|
|
HDA_CODEC_VOLUME("Surround Playback Volume", 0x04, 0, HDA_OUTPUT),
|
|
HDA_CODEC_MUTE("Surround Playback Switch", 0x04, 0, HDA_OUTPUT),
|
|
HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x03, 1, 0, HDA_OUTPUT),
|
|
HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x03, 1, 0, HDA_OUTPUT),
|
|
HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x03, 2, 0, HDA_OUTPUT),
|
|
HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x03, 2, 0, HDA_OUTPUT),
|
|
CA0132_CODEC_VOL("Capture Volume", VNID_MIC, HDA_INPUT),
|
|
CA0132_CODEC_MUTE("Capture Switch", VNID_MIC, HDA_INPUT),
|
|
HDA_CODEC_VOLUME("What U Hear Capture Volume", 0x0a, 0, HDA_INPUT),
|
|
HDA_CODEC_MUTE("What U Hear Capture Switch", 0x0a, 0, HDA_INPUT),
|
|
CA0132_CODEC_MUTE_MONO("HP/Speaker Auto Detect Playback Switch",
|
|
VNID_HP_ASEL, 1, HDA_OUTPUT),
|
|
{ } /* end */
|
|
};
|
|
|
|
static int ca0132_build_controls(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
int i, num_fx, num_sliders;
|
|
int err = 0;
|
|
|
|
/* Add Mixer controls */
|
|
for (i = 0; i < spec->num_mixers; i++) {
|
|
err = snd_hda_add_new_ctls(codec, spec->mixers[i]);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
/* Setup vmaster with surround slaves for desktop ca0132 devices */
|
|
if (ca0132_use_alt_functions(spec)) {
|
|
snd_hda_set_vmaster_tlv(codec, spec->dacs[0], HDA_OUTPUT,
|
|
spec->tlv);
|
|
snd_hda_add_vmaster(codec, "Master Playback Volume",
|
|
spec->tlv, ca0132_alt_slave_pfxs,
|
|
"Playback Volume");
|
|
err = __snd_hda_add_vmaster(codec, "Master Playback Switch",
|
|
NULL, ca0132_alt_slave_pfxs,
|
|
"Playback Switch",
|
|
true, &spec->vmaster_mute.sw_kctl);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
/* Add in and out effects controls.
|
|
* VoiceFX, PE and CrystalVoice are added separately.
|
|
*/
|
|
num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT;
|
|
for (i = 0; i < num_fx; i++) {
|
|
/* Desktop cards break if Echo Cancellation is used. */
|
|
if (ca0132_use_pci_mmio(spec)) {
|
|
if (i == (ECHO_CANCELLATION - IN_EFFECT_START_NID +
|
|
OUT_EFFECTS_COUNT))
|
|
continue;
|
|
}
|
|
|
|
err = add_fx_switch(codec, ca0132_effects[i].nid,
|
|
ca0132_effects[i].name,
|
|
ca0132_effects[i].direct);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
/*
|
|
* If codec has use_alt_controls set to true, add effect level sliders,
|
|
* EQ presets, and Smart Volume presets. Also, change names to add FX
|
|
* prefix, and change PlayEnhancement and CrystalVoice to match.
|
|
*/
|
|
if (ca0132_use_alt_controls(spec)) {
|
|
err = ca0132_alt_add_svm_enum(codec);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = add_ca0132_alt_eq_presets(codec);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = add_fx_switch(codec, PLAY_ENHANCEMENT,
|
|
"Enable OutFX", 0);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = add_fx_switch(codec, CRYSTAL_VOICE,
|
|
"Enable InFX", 1);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
num_sliders = OUT_EFFECTS_COUNT - 1;
|
|
for (i = 0; i < num_sliders; i++) {
|
|
err = ca0132_alt_add_effect_slider(codec,
|
|
ca0132_effects[i].nid,
|
|
ca0132_effects[i].name,
|
|
ca0132_effects[i].direct);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
err = ca0132_alt_add_effect_slider(codec, XBASS_XOVER,
|
|
"X-Bass Crossover", EFX_DIR_OUT);
|
|
|
|
if (err < 0)
|
|
return err;
|
|
} else {
|
|
err = add_fx_switch(codec, PLAY_ENHANCEMENT,
|
|
"PlayEnhancement", 0);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = add_fx_switch(codec, CRYSTAL_VOICE,
|
|
"CrystalVoice", 1);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
err = add_voicefx(codec);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/*
|
|
* If the codec uses alt_functions, you need the enumerated controls
|
|
* to select the new outputs and inputs, plus add the new mic boost
|
|
* setting control.
|
|
*/
|
|
if (ca0132_use_alt_functions(spec)) {
|
|
err = ca0132_alt_add_output_enum(codec);
|
|
if (err < 0)
|
|
return err;
|
|
err = ca0132_alt_add_mic_boost_enum(codec);
|
|
if (err < 0)
|
|
return err;
|
|
/*
|
|
* ZxR only has microphone input, there is no front panel
|
|
* header on the card, and aux-in is handled by the DBPro board.
|
|
*/
|
|
if (ca0132_quirk(spec) != QUIRK_ZXR) {
|
|
err = ca0132_alt_add_input_enum(codec);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
}
|
|
|
|
if (ca0132_quirk(spec) == QUIRK_AE5) {
|
|
err = ae5_add_headphone_gain_enum(codec);
|
|
if (err < 0)
|
|
return err;
|
|
err = ae5_add_sound_filter_enum(codec);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
if (ca0132_quirk(spec) == QUIRK_ZXR) {
|
|
err = zxr_add_headphone_gain_switch(codec);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
#ifdef ENABLE_TUNING_CONTROLS
|
|
add_tuning_ctls(codec);
|
|
#endif
|
|
|
|
err = snd_hda_jack_add_kctls(codec, &spec->autocfg);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
if (spec->dig_out) {
|
|
err = snd_hda_create_spdif_out_ctls(codec, spec->dig_out,
|
|
spec->dig_out);
|
|
if (err < 0)
|
|
return err;
|
|
err = snd_hda_create_spdif_share_sw(codec, &spec->multiout);
|
|
if (err < 0)
|
|
return err;
|
|
/* spec->multiout.share_spdif = 1; */
|
|
}
|
|
|
|
if (spec->dig_in) {
|
|
err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
if (ca0132_use_alt_functions(spec))
|
|
ca0132_alt_add_chmap_ctls(codec);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dbpro_build_controls(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
int err = 0;
|
|
|
|
if (spec->dig_out) {
|
|
err = snd_hda_create_spdif_out_ctls(codec, spec->dig_out,
|
|
spec->dig_out);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
if (spec->dig_in) {
|
|
err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* PCM
|
|
*/
|
|
static const struct hda_pcm_stream ca0132_pcm_analog_playback = {
|
|
.substreams = 1,
|
|
.channels_min = 2,
|
|
.channels_max = 6,
|
|
.ops = {
|
|
.prepare = ca0132_playback_pcm_prepare,
|
|
.cleanup = ca0132_playback_pcm_cleanup,
|
|
.get_delay = ca0132_playback_pcm_delay,
|
|
},
|
|
};
|
|
|
|
static const struct hda_pcm_stream ca0132_pcm_analog_capture = {
|
|
.substreams = 1,
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.ops = {
|
|
.prepare = ca0132_capture_pcm_prepare,
|
|
.cleanup = ca0132_capture_pcm_cleanup,
|
|
.get_delay = ca0132_capture_pcm_delay,
|
|
},
|
|
};
|
|
|
|
static const struct hda_pcm_stream ca0132_pcm_digital_playback = {
|
|
.substreams = 1,
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.ops = {
|
|
.open = ca0132_dig_playback_pcm_open,
|
|
.close = ca0132_dig_playback_pcm_close,
|
|
.prepare = ca0132_dig_playback_pcm_prepare,
|
|
.cleanup = ca0132_dig_playback_pcm_cleanup
|
|
},
|
|
};
|
|
|
|
static const struct hda_pcm_stream ca0132_pcm_digital_capture = {
|
|
.substreams = 1,
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
};
|
|
|
|
static int ca0132_build_pcms(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
struct hda_pcm *info;
|
|
|
|
info = snd_hda_codec_pcm_new(codec, "CA0132 Analog");
|
|
if (!info)
|
|
return -ENOMEM;
|
|
if (ca0132_use_alt_functions(spec)) {
|
|
info->own_chmap = true;
|
|
info->stream[SNDRV_PCM_STREAM_PLAYBACK].chmap
|
|
= ca0132_alt_chmaps;
|
|
}
|
|
info->stream[SNDRV_PCM_STREAM_PLAYBACK] = ca0132_pcm_analog_playback;
|
|
info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->dacs[0];
|
|
info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max =
|
|
spec->multiout.max_channels;
|
|
info->stream[SNDRV_PCM_STREAM_CAPTURE] = ca0132_pcm_analog_capture;
|
|
info->stream[SNDRV_PCM_STREAM_CAPTURE].substreams = 1;
|
|
info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adcs[0];
|
|
|
|
/* With the DSP enabled, desktops don't use this ADC. */
|
|
if (!ca0132_use_alt_functions(spec)) {
|
|
info = snd_hda_codec_pcm_new(codec, "CA0132 Analog Mic-In2");
|
|
if (!info)
|
|
return -ENOMEM;
|
|
info->stream[SNDRV_PCM_STREAM_CAPTURE] =
|
|
ca0132_pcm_analog_capture;
|
|
info->stream[SNDRV_PCM_STREAM_CAPTURE].substreams = 1;
|
|
info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adcs[1];
|
|
}
|
|
|
|
info = snd_hda_codec_pcm_new(codec, "CA0132 What U Hear");
|
|
if (!info)
|
|
return -ENOMEM;
|
|
info->stream[SNDRV_PCM_STREAM_CAPTURE] = ca0132_pcm_analog_capture;
|
|
info->stream[SNDRV_PCM_STREAM_CAPTURE].substreams = 1;
|
|
info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adcs[2];
|
|
|
|
if (!spec->dig_out && !spec->dig_in)
|
|
return 0;
|
|
|
|
info = snd_hda_codec_pcm_new(codec, "CA0132 Digital");
|
|
if (!info)
|
|
return -ENOMEM;
|
|
info->pcm_type = HDA_PCM_TYPE_SPDIF;
|
|
if (spec->dig_out) {
|
|
info->stream[SNDRV_PCM_STREAM_PLAYBACK] =
|
|
ca0132_pcm_digital_playback;
|
|
info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->dig_out;
|
|
}
|
|
if (spec->dig_in) {
|
|
info->stream[SNDRV_PCM_STREAM_CAPTURE] =
|
|
ca0132_pcm_digital_capture;
|
|
info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->dig_in;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dbpro_build_pcms(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
struct hda_pcm *info;
|
|
|
|
info = snd_hda_codec_pcm_new(codec, "CA0132 Alt Analog");
|
|
if (!info)
|
|
return -ENOMEM;
|
|
info->stream[SNDRV_PCM_STREAM_CAPTURE] = ca0132_pcm_analog_capture;
|
|
info->stream[SNDRV_PCM_STREAM_CAPTURE].substreams = 1;
|
|
info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adcs[0];
|
|
|
|
|
|
if (!spec->dig_out && !spec->dig_in)
|
|
return 0;
|
|
|
|
info = snd_hda_codec_pcm_new(codec, "CA0132 Digital");
|
|
if (!info)
|
|
return -ENOMEM;
|
|
info->pcm_type = HDA_PCM_TYPE_SPDIF;
|
|
if (spec->dig_out) {
|
|
info->stream[SNDRV_PCM_STREAM_PLAYBACK] =
|
|
ca0132_pcm_digital_playback;
|
|
info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->dig_out;
|
|
}
|
|
if (spec->dig_in) {
|
|
info->stream[SNDRV_PCM_STREAM_CAPTURE] =
|
|
ca0132_pcm_digital_capture;
|
|
info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->dig_in;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void init_output(struct hda_codec *codec, hda_nid_t pin, hda_nid_t dac)
|
|
{
|
|
if (pin) {
|
|
snd_hda_set_pin_ctl(codec, pin, PIN_HP);
|
|
if (get_wcaps(codec, pin) & AC_WCAP_OUT_AMP)
|
|
snd_hda_codec_write(codec, pin, 0,
|
|
AC_VERB_SET_AMP_GAIN_MUTE,
|
|
AMP_OUT_UNMUTE);
|
|
}
|
|
if (dac && (get_wcaps(codec, dac) & AC_WCAP_OUT_AMP))
|
|
snd_hda_codec_write(codec, dac, 0,
|
|
AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO);
|
|
}
|
|
|
|
static void init_input(struct hda_codec *codec, hda_nid_t pin, hda_nid_t adc)
|
|
{
|
|
if (pin) {
|
|
snd_hda_set_pin_ctl(codec, pin, PIN_VREF80);
|
|
if (get_wcaps(codec, pin) & AC_WCAP_IN_AMP)
|
|
snd_hda_codec_write(codec, pin, 0,
|
|
AC_VERB_SET_AMP_GAIN_MUTE,
|
|
AMP_IN_UNMUTE(0));
|
|
}
|
|
if (adc && (get_wcaps(codec, adc) & AC_WCAP_IN_AMP)) {
|
|
snd_hda_codec_write(codec, adc, 0, AC_VERB_SET_AMP_GAIN_MUTE,
|
|
AMP_IN_UNMUTE(0));
|
|
|
|
/* init to 0 dB and unmute. */
|
|
snd_hda_codec_amp_stereo(codec, adc, HDA_INPUT, 0,
|
|
HDA_AMP_VOLMASK, 0x5a);
|
|
snd_hda_codec_amp_stereo(codec, adc, HDA_INPUT, 0,
|
|
HDA_AMP_MUTE, 0);
|
|
}
|
|
}
|
|
|
|
static void refresh_amp_caps(struct hda_codec *codec, hda_nid_t nid, int dir)
|
|
{
|
|
unsigned int caps;
|
|
|
|
caps = snd_hda_param_read(codec, nid, dir == HDA_OUTPUT ?
|
|
AC_PAR_AMP_OUT_CAP : AC_PAR_AMP_IN_CAP);
|
|
snd_hda_override_amp_caps(codec, nid, dir, caps);
|
|
}
|
|
|
|
/*
|
|
* Switch between Digital built-in mic and analog mic.
|
|
*/
|
|
static void ca0132_set_dmic(struct hda_codec *codec, int enable)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
unsigned int tmp;
|
|
u8 val;
|
|
unsigned int oldval;
|
|
|
|
codec_dbg(codec, "ca0132_set_dmic: enable=%d\n", enable);
|
|
|
|
oldval = stop_mic1(codec);
|
|
ca0132_set_vipsource(codec, 0);
|
|
if (enable) {
|
|
/* set DMic input as 2-ch */
|
|
tmp = FLOAT_TWO;
|
|
dspio_set_uint_param(codec, 0x80, 0x00, tmp);
|
|
|
|
val = spec->dmic_ctl;
|
|
val |= 0x80;
|
|
snd_hda_codec_write(codec, spec->input_pins[0], 0,
|
|
VENDOR_CHIPIO_DMIC_CTL_SET, val);
|
|
|
|
if (!(spec->dmic_ctl & 0x20))
|
|
chipio_set_control_flag(codec, CONTROL_FLAG_DMIC, 1);
|
|
} else {
|
|
/* set AMic input as mono */
|
|
tmp = FLOAT_ONE;
|
|
dspio_set_uint_param(codec, 0x80, 0x00, tmp);
|
|
|
|
val = spec->dmic_ctl;
|
|
/* clear bit7 and bit5 to disable dmic */
|
|
val &= 0x5f;
|
|
snd_hda_codec_write(codec, spec->input_pins[0], 0,
|
|
VENDOR_CHIPIO_DMIC_CTL_SET, val);
|
|
|
|
if (!(spec->dmic_ctl & 0x20))
|
|
chipio_set_control_flag(codec, CONTROL_FLAG_DMIC, 0);
|
|
}
|
|
ca0132_set_vipsource(codec, 1);
|
|
resume_mic1(codec, oldval);
|
|
}
|
|
|
|
/*
|
|
* Initialization for Digital Mic.
|
|
*/
|
|
static void ca0132_init_dmic(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
u8 val;
|
|
|
|
/* Setup Digital Mic here, but don't enable.
|
|
* Enable based on jack detect.
|
|
*/
|
|
|
|
/* MCLK uses MPIO1, set to enable.
|
|
* Bit 2-0: MPIO select
|
|
* Bit 3: set to disable
|
|
* Bit 7-4: reserved
|
|
*/
|
|
val = 0x01;
|
|
snd_hda_codec_write(codec, spec->input_pins[0], 0,
|
|
VENDOR_CHIPIO_DMIC_MCLK_SET, val);
|
|
|
|
/* Data1 uses MPIO3. Data2 not use
|
|
* Bit 2-0: Data1 MPIO select
|
|
* Bit 3: set disable Data1
|
|
* Bit 6-4: Data2 MPIO select
|
|
* Bit 7: set disable Data2
|
|
*/
|
|
val = 0x83;
|
|
snd_hda_codec_write(codec, spec->input_pins[0], 0,
|
|
VENDOR_CHIPIO_DMIC_PIN_SET, val);
|
|
|
|
/* Use Ch-0 and Ch-1. Rate is 48K, mode 1. Disable DMic first.
|
|
* Bit 3-0: Channel mask
|
|
* Bit 4: set for 48KHz, clear for 32KHz
|
|
* Bit 5: mode
|
|
* Bit 6: set to select Data2, clear for Data1
|
|
* Bit 7: set to enable DMic, clear for AMic
|
|
*/
|
|
if (ca0132_quirk(spec) == QUIRK_ALIENWARE_M17XR4)
|
|
val = 0x33;
|
|
else
|
|
val = 0x23;
|
|
/* keep a copy of dmic ctl val for enable/disable dmic purpuse */
|
|
spec->dmic_ctl = val;
|
|
snd_hda_codec_write(codec, spec->input_pins[0], 0,
|
|
VENDOR_CHIPIO_DMIC_CTL_SET, val);
|
|
}
|
|
|
|
/*
|
|
* Initialization for Analog Mic 2
|
|
*/
|
|
static void ca0132_init_analog_mic2(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
mutex_lock(&spec->chipio_mutex);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x20);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_ADDRESS_HIGH, 0x19);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_DATA_WRITE, 0x00);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x2D);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_ADDRESS_HIGH, 0x19);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_DATA_WRITE, 0x00);
|
|
mutex_unlock(&spec->chipio_mutex);
|
|
}
|
|
|
|
static void ca0132_refresh_widget_caps(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
int i;
|
|
|
|
codec_dbg(codec, "ca0132_refresh_widget_caps.\n");
|
|
snd_hda_codec_update_widgets(codec);
|
|
|
|
for (i = 0; i < spec->multiout.num_dacs; i++)
|
|
refresh_amp_caps(codec, spec->dacs[i], HDA_OUTPUT);
|
|
|
|
for (i = 0; i < spec->num_outputs; i++)
|
|
refresh_amp_caps(codec, spec->out_pins[i], HDA_OUTPUT);
|
|
|
|
for (i = 0; i < spec->num_inputs; i++) {
|
|
refresh_amp_caps(codec, spec->adcs[i], HDA_INPUT);
|
|
refresh_amp_caps(codec, spec->input_pins[i], HDA_INPUT);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Creates a dummy stream to bind the output to. This seems to have to be done
|
|
* after changing the main outputs source and destination streams.
|
|
*/
|
|
static void ca0132_alt_create_dummy_stream(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
unsigned int stream_format;
|
|
|
|
stream_format = snd_hdac_calc_stream_format(48000, 2,
|
|
SNDRV_PCM_FORMAT_S32_LE, 32, 0);
|
|
|
|
snd_hda_codec_setup_stream(codec, spec->dacs[0], spec->dsp_stream_id,
|
|
0, stream_format);
|
|
|
|
snd_hda_codec_cleanup_stream(codec, spec->dacs[0]);
|
|
}
|
|
|
|
/*
|
|
* Initialize mic for non-chromebook ca0132 implementations.
|
|
*/
|
|
static void ca0132_alt_init_analog_mics(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
unsigned int tmp;
|
|
|
|
/* Mic 1 Setup */
|
|
chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000);
|
|
chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000);
|
|
if (ca0132_quirk(spec) == QUIRK_R3DI) {
|
|
chipio_set_conn_rate(codec, 0x0F, SR_96_000);
|
|
tmp = FLOAT_ONE;
|
|
} else
|
|
tmp = FLOAT_THREE;
|
|
dspio_set_uint_param(codec, 0x80, 0x00, tmp);
|
|
|
|
/* Mic 2 setup (not present on desktop cards) */
|
|
chipio_set_conn_rate(codec, MEM_CONNID_MICIN2, SR_96_000);
|
|
chipio_set_conn_rate(codec, MEM_CONNID_MICOUT2, SR_96_000);
|
|
if (ca0132_quirk(spec) == QUIRK_R3DI)
|
|
chipio_set_conn_rate(codec, 0x0F, SR_96_000);
|
|
tmp = FLOAT_ZERO;
|
|
dspio_set_uint_param(codec, 0x80, 0x01, tmp);
|
|
}
|
|
|
|
/*
|
|
* Sets the source of stream 0x14 to connpointID 0x48, and the destination
|
|
* connpointID to 0x91. If this isn't done, the destination is 0x71, and
|
|
* you get no sound. I'm guessing this has to do with the Sound Blaster Z
|
|
* having an updated DAC, which changes the destination to that DAC.
|
|
*/
|
|
static void sbz_connect_streams(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
mutex_lock(&spec->chipio_mutex);
|
|
|
|
codec_dbg(codec, "Connect Streams entered, mutex locked and loaded.\n");
|
|
|
|
chipio_set_stream_channels(codec, 0x0C, 6);
|
|
chipio_set_stream_control(codec, 0x0C, 1);
|
|
|
|
/* This value is 0x43 for 96khz, and 0x83 for 192khz. */
|
|
chipio_write_no_mutex(codec, 0x18a020, 0x00000043);
|
|
|
|
/* Setup stream 0x14 with it's source and destination points */
|
|
chipio_set_stream_source_dest(codec, 0x14, 0x48, 0x91);
|
|
chipio_set_conn_rate_no_mutex(codec, 0x48, SR_96_000);
|
|
chipio_set_conn_rate_no_mutex(codec, 0x91, SR_96_000);
|
|
chipio_set_stream_channels(codec, 0x14, 2);
|
|
chipio_set_stream_control(codec, 0x14, 1);
|
|
|
|
codec_dbg(codec, "Connect Streams exited, mutex released.\n");
|
|
|
|
mutex_unlock(&spec->chipio_mutex);
|
|
}
|
|
|
|
/*
|
|
* Write data through ChipIO to setup proper stream destinations.
|
|
* Not sure how it exactly works, but it seems to direct data
|
|
* to different destinations. Example is f8 to c0, e0 to c0.
|
|
* All I know is, if you don't set these, you get no sound.
|
|
*/
|
|
static void sbz_chipio_startup_data(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
mutex_lock(&spec->chipio_mutex);
|
|
codec_dbg(codec, "Startup Data entered, mutex locked and loaded.\n");
|
|
|
|
/* These control audio output */
|
|
chipio_write_no_mutex(codec, 0x190060, 0x0001f8c0);
|
|
chipio_write_no_mutex(codec, 0x190064, 0x0001f9c1);
|
|
chipio_write_no_mutex(codec, 0x190068, 0x0001fac6);
|
|
chipio_write_no_mutex(codec, 0x19006c, 0x0001fbc7);
|
|
/* Signal to update I think */
|
|
chipio_write_no_mutex(codec, 0x19042c, 0x00000001);
|
|
|
|
chipio_set_stream_channels(codec, 0x0C, 6);
|
|
chipio_set_stream_control(codec, 0x0C, 1);
|
|
/* No clue what these control */
|
|
if (ca0132_quirk(spec) == QUIRK_SBZ) {
|
|
chipio_write_no_mutex(codec, 0x190030, 0x0001e0c0);
|
|
chipio_write_no_mutex(codec, 0x190034, 0x0001e1c1);
|
|
chipio_write_no_mutex(codec, 0x190038, 0x0001e4c2);
|
|
chipio_write_no_mutex(codec, 0x19003c, 0x0001e5c3);
|
|
chipio_write_no_mutex(codec, 0x190040, 0x0001e2c4);
|
|
chipio_write_no_mutex(codec, 0x190044, 0x0001e3c5);
|
|
chipio_write_no_mutex(codec, 0x190048, 0x0001e8c6);
|
|
chipio_write_no_mutex(codec, 0x19004c, 0x0001e9c7);
|
|
chipio_write_no_mutex(codec, 0x190050, 0x0001ecc8);
|
|
chipio_write_no_mutex(codec, 0x190054, 0x0001edc9);
|
|
chipio_write_no_mutex(codec, 0x190058, 0x0001eaca);
|
|
chipio_write_no_mutex(codec, 0x19005c, 0x0001ebcb);
|
|
} else if (ca0132_quirk(spec) == QUIRK_ZXR) {
|
|
chipio_write_no_mutex(codec, 0x190038, 0x000140c2);
|
|
chipio_write_no_mutex(codec, 0x19003c, 0x000141c3);
|
|
chipio_write_no_mutex(codec, 0x190040, 0x000150c4);
|
|
chipio_write_no_mutex(codec, 0x190044, 0x000151c5);
|
|
chipio_write_no_mutex(codec, 0x190050, 0x000142c8);
|
|
chipio_write_no_mutex(codec, 0x190054, 0x000143c9);
|
|
chipio_write_no_mutex(codec, 0x190058, 0x000152ca);
|
|
chipio_write_no_mutex(codec, 0x19005c, 0x000153cb);
|
|
}
|
|
chipio_write_no_mutex(codec, 0x19042c, 0x00000001);
|
|
|
|
codec_dbg(codec, "Startup Data exited, mutex released.\n");
|
|
mutex_unlock(&spec->chipio_mutex);
|
|
}
|
|
|
|
/*
|
|
* Custom DSP SCP commands where the src value is 0x00 instead of 0x20. This is
|
|
* done after the DSP is loaded.
|
|
*/
|
|
static void ca0132_alt_dsp_scp_startup(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
unsigned int tmp, i;
|
|
|
|
/*
|
|
* Gotta run these twice, or else mic works inconsistently. Not clear
|
|
* why this is, but multiple tests have confirmed it.
|
|
*/
|
|
for (i = 0; i < 2; i++) {
|
|
switch (ca0132_quirk(spec)) {
|
|
case QUIRK_SBZ:
|
|
case QUIRK_AE5:
|
|
tmp = 0x00000003;
|
|
dspio_set_uint_param_no_source(codec, 0x80, 0x0C, tmp);
|
|
tmp = 0x00000000;
|
|
dspio_set_uint_param_no_source(codec, 0x80, 0x0A, tmp);
|
|
tmp = 0x00000001;
|
|
dspio_set_uint_param_no_source(codec, 0x80, 0x0B, tmp);
|
|
tmp = 0x00000004;
|
|
dspio_set_uint_param_no_source(codec, 0x80, 0x0C, tmp);
|
|
tmp = 0x00000005;
|
|
dspio_set_uint_param_no_source(codec, 0x80, 0x0C, tmp);
|
|
tmp = 0x00000000;
|
|
dspio_set_uint_param_no_source(codec, 0x80, 0x0C, tmp);
|
|
break;
|
|
case QUIRK_R3D:
|
|
case QUIRK_R3DI:
|
|
tmp = 0x00000000;
|
|
dspio_set_uint_param_no_source(codec, 0x80, 0x0A, tmp);
|
|
tmp = 0x00000001;
|
|
dspio_set_uint_param_no_source(codec, 0x80, 0x0B, tmp);
|
|
tmp = 0x00000004;
|
|
dspio_set_uint_param_no_source(codec, 0x80, 0x0C, tmp);
|
|
tmp = 0x00000005;
|
|
dspio_set_uint_param_no_source(codec, 0x80, 0x0C, tmp);
|
|
tmp = 0x00000000;
|
|
dspio_set_uint_param_no_source(codec, 0x80, 0x0C, tmp);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
msleep(100);
|
|
}
|
|
}
|
|
|
|
static void ca0132_alt_dsp_initial_mic_setup(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
unsigned int tmp;
|
|
|
|
chipio_set_stream_control(codec, 0x03, 0);
|
|
chipio_set_stream_control(codec, 0x04, 0);
|
|
|
|
chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000);
|
|
chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000);
|
|
|
|
tmp = FLOAT_THREE;
|
|
dspio_set_uint_param(codec, 0x80, 0x00, tmp);
|
|
|
|
chipio_set_stream_control(codec, 0x03, 1);
|
|
chipio_set_stream_control(codec, 0x04, 1);
|
|
|
|
switch (ca0132_quirk(spec)) {
|
|
case QUIRK_SBZ:
|
|
chipio_write(codec, 0x18b098, 0x0000000c);
|
|
chipio_write(codec, 0x18b09C, 0x0000000c);
|
|
break;
|
|
case QUIRK_AE5:
|
|
chipio_write(codec, 0x18b098, 0x0000000c);
|
|
chipio_write(codec, 0x18b09c, 0x0000004c);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void ae5_post_dsp_register_set(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
chipio_8051_write_direct(codec, 0x93, 0x10);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x44);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_PLL_PMU_WRITE, 0xc2);
|
|
|
|
writeb(0xff, spec->mem_base + 0x304);
|
|
writeb(0xff, spec->mem_base + 0x304);
|
|
writeb(0xff, spec->mem_base + 0x304);
|
|
writeb(0xff, spec->mem_base + 0x304);
|
|
writeb(0x00, spec->mem_base + 0x100);
|
|
writeb(0xff, spec->mem_base + 0x304);
|
|
writeb(0x00, spec->mem_base + 0x100);
|
|
writeb(0xff, spec->mem_base + 0x304);
|
|
writeb(0x00, spec->mem_base + 0x100);
|
|
writeb(0xff, spec->mem_base + 0x304);
|
|
writeb(0x00, spec->mem_base + 0x100);
|
|
writeb(0xff, spec->mem_base + 0x304);
|
|
|
|
ca0113_mmio_command_set(codec, 0x30, 0x2b, 0x3f);
|
|
ca0113_mmio_command_set(codec, 0x30, 0x2d, 0x3f);
|
|
ca0113_mmio_command_set(codec, 0x48, 0x07, 0x83);
|
|
}
|
|
|
|
static void ae5_post_dsp_param_setup(struct hda_codec *codec)
|
|
{
|
|
/*
|
|
* Param3 in the 8051's memory is represented by the ascii string 'mch'
|
|
* which seems to be 'multichannel'. This is also mentioned in the
|
|
* AE-5's registry values in Windows.
|
|
*/
|
|
chipio_set_control_param(codec, 3, 0);
|
|
/*
|
|
* I believe ASI is 'audio serial interface' and that it's used to
|
|
* change colors on the external LED strip connected to the AE-5.
|
|
*/
|
|
chipio_set_control_flag(codec, CONTROL_FLAG_ASI_96KHZ, 1);
|
|
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, 0x724, 0x83);
|
|
chipio_set_control_param(codec, CONTROL_PARAM_ASI, 0);
|
|
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x92);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_ADDRESS_HIGH, 0xfa);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_DATA_WRITE, 0x22);
|
|
}
|
|
|
|
static void ae5_post_dsp_pll_setup(struct hda_codec *codec)
|
|
{
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x41);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_PLL_PMU_WRITE, 0xc8);
|
|
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x45);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_PLL_PMU_WRITE, 0xcc);
|
|
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x40);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_PLL_PMU_WRITE, 0xcb);
|
|
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x43);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_PLL_PMU_WRITE, 0xc7);
|
|
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x51);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_PLL_PMU_WRITE, 0x8d);
|
|
}
|
|
|
|
static void ae5_post_dsp_stream_setup(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
mutex_lock(&spec->chipio_mutex);
|
|
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, 0x725, 0x81);
|
|
|
|
chipio_set_conn_rate_no_mutex(codec, 0x70, SR_96_000);
|
|
|
|
chipio_set_stream_channels(codec, 0x0C, 6);
|
|
chipio_set_stream_control(codec, 0x0C, 1);
|
|
|
|
chipio_set_stream_source_dest(codec, 0x5, 0x43, 0x0);
|
|
|
|
chipio_set_stream_source_dest(codec, 0x18, 0x9, 0xd0);
|
|
chipio_set_conn_rate_no_mutex(codec, 0xd0, SR_96_000);
|
|
chipio_set_stream_channels(codec, 0x18, 6);
|
|
chipio_set_stream_control(codec, 0x18, 1);
|
|
|
|
chipio_set_control_param_no_mutex(codec, CONTROL_PARAM_ASI, 4);
|
|
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x43);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_PLL_PMU_WRITE, 0xc7);
|
|
|
|
ca0113_mmio_command_set(codec, 0x48, 0x01, 0x80);
|
|
|
|
mutex_unlock(&spec->chipio_mutex);
|
|
}
|
|
|
|
static void ae5_post_dsp_startup_data(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
mutex_lock(&spec->chipio_mutex);
|
|
|
|
chipio_write_no_mutex(codec, 0x189000, 0x0001f101);
|
|
chipio_write_no_mutex(codec, 0x189004, 0x0001f101);
|
|
chipio_write_no_mutex(codec, 0x189024, 0x00014004);
|
|
chipio_write_no_mutex(codec, 0x189028, 0x0002000f);
|
|
|
|
ca0113_mmio_command_set(codec, 0x48, 0x0a, 0x05);
|
|
chipio_set_control_param_no_mutex(codec, CONTROL_PARAM_ASI, 7);
|
|
ca0113_mmio_command_set(codec, 0x48, 0x0b, 0x12);
|
|
ca0113_mmio_command_set(codec, 0x48, 0x04, 0x00);
|
|
ca0113_mmio_command_set(codec, 0x48, 0x06, 0x48);
|
|
ca0113_mmio_command_set(codec, 0x48, 0x0a, 0x05);
|
|
ca0113_mmio_command_set(codec, 0x48, 0x07, 0x83);
|
|
ca0113_mmio_command_set(codec, 0x48, 0x0f, 0x00);
|
|
ca0113_mmio_command_set(codec, 0x48, 0x10, 0x00);
|
|
ca0113_mmio_gpio_set(codec, 0, true);
|
|
ca0113_mmio_gpio_set(codec, 1, true);
|
|
ca0113_mmio_command_set(codec, 0x48, 0x07, 0x80);
|
|
|
|
chipio_write_no_mutex(codec, 0x18b03c, 0x00000012);
|
|
|
|
ca0113_mmio_command_set(codec, 0x48, 0x0f, 0x00);
|
|
ca0113_mmio_command_set(codec, 0x48, 0x10, 0x00);
|
|
|
|
mutex_unlock(&spec->chipio_mutex);
|
|
}
|
|
|
|
/*
|
|
* Setup default parameters for DSP
|
|
*/
|
|
static void ca0132_setup_defaults(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
unsigned int tmp;
|
|
int num_fx;
|
|
int idx, i;
|
|
|
|
if (spec->dsp_state != DSP_DOWNLOADED)
|
|
return;
|
|
|
|
/* out, in effects + voicefx */
|
|
num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT + 1;
|
|
for (idx = 0; idx < num_fx; idx++) {
|
|
for (i = 0; i <= ca0132_effects[idx].params; i++) {
|
|
dspio_set_uint_param(codec, ca0132_effects[idx].mid,
|
|
ca0132_effects[idx].reqs[i],
|
|
ca0132_effects[idx].def_vals[i]);
|
|
}
|
|
}
|
|
|
|
/*remove DSP headroom*/
|
|
tmp = FLOAT_ZERO;
|
|
dspio_set_uint_param(codec, 0x96, 0x3C, tmp);
|
|
|
|
/*set speaker EQ bypass attenuation*/
|
|
dspio_set_uint_param(codec, 0x8f, 0x01, tmp);
|
|
|
|
/* set AMic1 and AMic2 as mono mic */
|
|
tmp = FLOAT_ONE;
|
|
dspio_set_uint_param(codec, 0x80, 0x00, tmp);
|
|
dspio_set_uint_param(codec, 0x80, 0x01, tmp);
|
|
|
|
/* set AMic1 as CrystalVoice input */
|
|
tmp = FLOAT_ONE;
|
|
dspio_set_uint_param(codec, 0x80, 0x05, tmp);
|
|
|
|
/* set WUH source */
|
|
tmp = FLOAT_TWO;
|
|
dspio_set_uint_param(codec, 0x31, 0x00, tmp);
|
|
}
|
|
|
|
/*
|
|
* Setup default parameters for Recon3D/Recon3Di DSP.
|
|
*/
|
|
|
|
static void r3d_setup_defaults(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
unsigned int tmp;
|
|
int num_fx;
|
|
int idx, i;
|
|
|
|
if (spec->dsp_state != DSP_DOWNLOADED)
|
|
return;
|
|
|
|
ca0132_alt_dsp_scp_startup(codec);
|
|
ca0132_alt_init_analog_mics(codec);
|
|
|
|
/*remove DSP headroom*/
|
|
tmp = FLOAT_ZERO;
|
|
dspio_set_uint_param(codec, 0x96, 0x3C, tmp);
|
|
|
|
/* set WUH source */
|
|
tmp = FLOAT_TWO;
|
|
dspio_set_uint_param(codec, 0x31, 0x00, tmp);
|
|
chipio_set_conn_rate(codec, MEM_CONNID_WUH, SR_48_000);
|
|
|
|
/* Set speaker source? */
|
|
dspio_set_uint_param(codec, 0x32, 0x00, tmp);
|
|
|
|
if (ca0132_quirk(spec) == QUIRK_R3DI)
|
|
r3di_gpio_dsp_status_set(codec, R3DI_DSP_DOWNLOADED);
|
|
|
|
/* Setup effect defaults */
|
|
num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT + 1;
|
|
for (idx = 0; idx < num_fx; idx++) {
|
|
for (i = 0; i <= ca0132_effects[idx].params; i++) {
|
|
dspio_set_uint_param(codec,
|
|
ca0132_effects[idx].mid,
|
|
ca0132_effects[idx].reqs[i],
|
|
ca0132_effects[idx].def_vals[i]);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Setup default parameters for the Sound Blaster Z DSP. A lot more going on
|
|
* than the Chromebook setup.
|
|
*/
|
|
static void sbz_setup_defaults(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
unsigned int tmp;
|
|
int num_fx;
|
|
int idx, i;
|
|
|
|
if (spec->dsp_state != DSP_DOWNLOADED)
|
|
return;
|
|
|
|
ca0132_alt_dsp_scp_startup(codec);
|
|
ca0132_alt_init_analog_mics(codec);
|
|
sbz_connect_streams(codec);
|
|
sbz_chipio_startup_data(codec);
|
|
|
|
chipio_set_stream_control(codec, 0x03, 1);
|
|
chipio_set_stream_control(codec, 0x04, 1);
|
|
|
|
/*
|
|
* Sets internal input loopback to off, used to have a switch to
|
|
* enable input loopback, but turned out to be way too buggy.
|
|
*/
|
|
tmp = FLOAT_ONE;
|
|
dspio_set_uint_param(codec, 0x37, 0x08, tmp);
|
|
dspio_set_uint_param(codec, 0x37, 0x10, tmp);
|
|
|
|
/*remove DSP headroom*/
|
|
tmp = FLOAT_ZERO;
|
|
dspio_set_uint_param(codec, 0x96, 0x3C, tmp);
|
|
|
|
/* set WUH source */
|
|
tmp = FLOAT_TWO;
|
|
dspio_set_uint_param(codec, 0x31, 0x00, tmp);
|
|
chipio_set_conn_rate(codec, MEM_CONNID_WUH, SR_48_000);
|
|
|
|
/* Set speaker source? */
|
|
dspio_set_uint_param(codec, 0x32, 0x00, tmp);
|
|
|
|
ca0132_alt_dsp_initial_mic_setup(codec);
|
|
|
|
/* out, in effects + voicefx */
|
|
num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT + 1;
|
|
for (idx = 0; idx < num_fx; idx++) {
|
|
for (i = 0; i <= ca0132_effects[idx].params; i++) {
|
|
dspio_set_uint_param(codec,
|
|
ca0132_effects[idx].mid,
|
|
ca0132_effects[idx].reqs[i],
|
|
ca0132_effects[idx].def_vals[i]);
|
|
}
|
|
}
|
|
|
|
ca0132_alt_create_dummy_stream(codec);
|
|
}
|
|
|
|
/*
|
|
* Setup default parameters for the Sound BlasterX AE-5 DSP.
|
|
*/
|
|
static void ae5_setup_defaults(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
unsigned int tmp;
|
|
int num_fx;
|
|
int idx, i;
|
|
|
|
if (spec->dsp_state != DSP_DOWNLOADED)
|
|
return;
|
|
|
|
ca0132_alt_dsp_scp_startup(codec);
|
|
ca0132_alt_init_analog_mics(codec);
|
|
chipio_set_stream_control(codec, 0x03, 1);
|
|
chipio_set_stream_control(codec, 0x04, 1);
|
|
|
|
/* New, unknown SCP req's */
|
|
tmp = FLOAT_ZERO;
|
|
dspio_set_uint_param(codec, 0x96, 0x29, tmp);
|
|
dspio_set_uint_param(codec, 0x96, 0x2a, tmp);
|
|
dspio_set_uint_param(codec, 0x80, 0x0d, tmp);
|
|
dspio_set_uint_param(codec, 0x80, 0x0e, tmp);
|
|
|
|
ca0113_mmio_command_set(codec, 0x30, 0x2e, 0x3f);
|
|
ca0113_mmio_gpio_set(codec, 0, false);
|
|
ca0113_mmio_command_set(codec, 0x30, 0x28, 0x00);
|
|
|
|
/* Internal loopback off */
|
|
tmp = FLOAT_ONE;
|
|
dspio_set_uint_param(codec, 0x37, 0x08, tmp);
|
|
dspio_set_uint_param(codec, 0x37, 0x10, tmp);
|
|
|
|
/*remove DSP headroom*/
|
|
tmp = FLOAT_ZERO;
|
|
dspio_set_uint_param(codec, 0x96, 0x3C, tmp);
|
|
|
|
/* set WUH source */
|
|
tmp = FLOAT_TWO;
|
|
dspio_set_uint_param(codec, 0x31, 0x00, tmp);
|
|
chipio_set_conn_rate(codec, MEM_CONNID_WUH, SR_48_000);
|
|
|
|
/* Set speaker source? */
|
|
dspio_set_uint_param(codec, 0x32, 0x00, tmp);
|
|
|
|
ca0132_alt_dsp_initial_mic_setup(codec);
|
|
ae5_post_dsp_register_set(codec);
|
|
ae5_post_dsp_param_setup(codec);
|
|
ae5_post_dsp_pll_setup(codec);
|
|
ae5_post_dsp_stream_setup(codec);
|
|
ae5_post_dsp_startup_data(codec);
|
|
|
|
/* out, in effects + voicefx */
|
|
num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT + 1;
|
|
for (idx = 0; idx < num_fx; idx++) {
|
|
for (i = 0; i <= ca0132_effects[idx].params; i++) {
|
|
dspio_set_uint_param(codec,
|
|
ca0132_effects[idx].mid,
|
|
ca0132_effects[idx].reqs[i],
|
|
ca0132_effects[idx].def_vals[i]);
|
|
}
|
|
}
|
|
|
|
ca0132_alt_create_dummy_stream(codec);
|
|
}
|
|
|
|
/*
|
|
* Initialization of flags in chip
|
|
*/
|
|
static void ca0132_init_flags(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
if (ca0132_use_alt_functions(spec)) {
|
|
chipio_set_control_flag(codec, CONTROL_FLAG_DSP_96KHZ, 1);
|
|
chipio_set_control_flag(codec, CONTROL_FLAG_DAC_96KHZ, 1);
|
|
chipio_set_control_flag(codec, CONTROL_FLAG_ADC_B_96KHZ, 1);
|
|
chipio_set_control_flag(codec, CONTROL_FLAG_ADC_C_96KHZ, 1);
|
|
chipio_set_control_flag(codec, CONTROL_FLAG_SRC_RATE_96KHZ, 1);
|
|
chipio_set_control_flag(codec, CONTROL_FLAG_IDLE_ENABLE, 0);
|
|
chipio_set_control_flag(codec, CONTROL_FLAG_SPDIF2OUT, 0);
|
|
chipio_set_control_flag(codec,
|
|
CONTROL_FLAG_PORT_D_10KOHM_LOAD, 0);
|
|
chipio_set_control_flag(codec,
|
|
CONTROL_FLAG_PORT_A_10KOHM_LOAD, 1);
|
|
} else {
|
|
chipio_set_control_flag(codec, CONTROL_FLAG_IDLE_ENABLE, 0);
|
|
chipio_set_control_flag(codec,
|
|
CONTROL_FLAG_PORT_A_COMMON_MODE, 0);
|
|
chipio_set_control_flag(codec,
|
|
CONTROL_FLAG_PORT_D_COMMON_MODE, 0);
|
|
chipio_set_control_flag(codec,
|
|
CONTROL_FLAG_PORT_A_10KOHM_LOAD, 0);
|
|
chipio_set_control_flag(codec,
|
|
CONTROL_FLAG_PORT_D_10KOHM_LOAD, 0);
|
|
chipio_set_control_flag(codec, CONTROL_FLAG_ADC_C_HIGH_PASS, 1);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Initialization of parameters in chip
|
|
*/
|
|
static void ca0132_init_params(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
if (ca0132_use_alt_functions(spec)) {
|
|
chipio_set_conn_rate(codec, MEM_CONNID_WUH, SR_48_000);
|
|
chipio_set_conn_rate(codec, 0x0B, SR_48_000);
|
|
chipio_set_control_param(codec, CONTROL_PARAM_SPDIF1_SOURCE, 0);
|
|
chipio_set_control_param(codec, 0, 0);
|
|
chipio_set_control_param(codec, CONTROL_PARAM_VIP_SOURCE, 0);
|
|
}
|
|
|
|
chipio_set_control_param(codec, CONTROL_PARAM_PORTA_160OHM_GAIN, 6);
|
|
chipio_set_control_param(codec, CONTROL_PARAM_PORTD_160OHM_GAIN, 6);
|
|
}
|
|
|
|
static void ca0132_set_dsp_msr(struct hda_codec *codec, bool is96k)
|
|
{
|
|
chipio_set_control_flag(codec, CONTROL_FLAG_DSP_96KHZ, is96k);
|
|
chipio_set_control_flag(codec, CONTROL_FLAG_DAC_96KHZ, is96k);
|
|
chipio_set_control_flag(codec, CONTROL_FLAG_SRC_RATE_96KHZ, is96k);
|
|
chipio_set_control_flag(codec, CONTROL_FLAG_SRC_CLOCK_196MHZ, is96k);
|
|
chipio_set_control_flag(codec, CONTROL_FLAG_ADC_B_96KHZ, is96k);
|
|
chipio_set_control_flag(codec, CONTROL_FLAG_ADC_C_96KHZ, is96k);
|
|
|
|
chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000);
|
|
chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000);
|
|
chipio_set_conn_rate(codec, MEM_CONNID_WUH, SR_48_000);
|
|
}
|
|
|
|
static bool ca0132_download_dsp_images(struct hda_codec *codec)
|
|
{
|
|
bool dsp_loaded = false;
|
|
struct ca0132_spec *spec = codec->spec;
|
|
const struct dsp_image_seg *dsp_os_image;
|
|
const struct firmware *fw_entry = NULL;
|
|
/*
|
|
* Alternate firmwares for different variants. The Recon3Di apparently
|
|
* can use the default firmware, but I'll leave the option in case
|
|
* it needs it again.
|
|
*/
|
|
switch (ca0132_quirk(spec)) {
|
|
case QUIRK_SBZ:
|
|
case QUIRK_R3D:
|
|
case QUIRK_AE5:
|
|
if (request_firmware(&fw_entry, DESKTOP_EFX_FILE,
|
|
codec->card->dev) != 0)
|
|
codec_dbg(codec, "Desktop firmware not found.");
|
|
else
|
|
codec_dbg(codec, "Desktop firmware selected.");
|
|
break;
|
|
case QUIRK_R3DI:
|
|
if (request_firmware(&fw_entry, R3DI_EFX_FILE,
|
|
codec->card->dev) != 0)
|
|
codec_dbg(codec, "Recon3Di alt firmware not detected.");
|
|
else
|
|
codec_dbg(codec, "Recon3Di firmware selected.");
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
/*
|
|
* Use default ctefx.bin if no alt firmware is detected, or if none
|
|
* exists for your particular codec.
|
|
*/
|
|
if (!fw_entry) {
|
|
codec_dbg(codec, "Default firmware selected.");
|
|
if (request_firmware(&fw_entry, EFX_FILE,
|
|
codec->card->dev) != 0)
|
|
return false;
|
|
}
|
|
|
|
dsp_os_image = (struct dsp_image_seg *)(fw_entry->data);
|
|
if (dspload_image(codec, dsp_os_image, 0, 0, true, 0)) {
|
|
codec_err(codec, "ca0132 DSP load image failed\n");
|
|
goto exit_download;
|
|
}
|
|
|
|
dsp_loaded = dspload_wait_loaded(codec);
|
|
|
|
exit_download:
|
|
release_firmware(fw_entry);
|
|
|
|
return dsp_loaded;
|
|
}
|
|
|
|
static void ca0132_download_dsp(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
#ifndef CONFIG_SND_HDA_CODEC_CA0132_DSP
|
|
return; /* NOP */
|
|
#endif
|
|
|
|
if (spec->dsp_state == DSP_DOWNLOAD_FAILED)
|
|
return; /* don't retry failures */
|
|
|
|
chipio_enable_clocks(codec);
|
|
if (spec->dsp_state != DSP_DOWNLOADED) {
|
|
spec->dsp_state = DSP_DOWNLOADING;
|
|
|
|
if (!ca0132_download_dsp_images(codec))
|
|
spec->dsp_state = DSP_DOWNLOAD_FAILED;
|
|
else
|
|
spec->dsp_state = DSP_DOWNLOADED;
|
|
}
|
|
|
|
/* For codecs using alt functions, this is already done earlier */
|
|
if (spec->dsp_state == DSP_DOWNLOADED && !ca0132_use_alt_functions(spec))
|
|
ca0132_set_dsp_msr(codec, true);
|
|
}
|
|
|
|
static void ca0132_process_dsp_response(struct hda_codec *codec,
|
|
struct hda_jack_callback *callback)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
codec_dbg(codec, "ca0132_process_dsp_response\n");
|
|
snd_hda_power_up_pm(codec);
|
|
if (spec->wait_scp) {
|
|
if (dspio_get_response_data(codec) >= 0)
|
|
spec->wait_scp = 0;
|
|
}
|
|
|
|
dspio_clear_response_queue(codec);
|
|
snd_hda_power_down_pm(codec);
|
|
}
|
|
|
|
static void hp_callback(struct hda_codec *codec, struct hda_jack_callback *cb)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
struct hda_jack_tbl *tbl;
|
|
|
|
/* Delay enabling the HP amp, to let the mic-detection
|
|
* state machine run.
|
|
*/
|
|
tbl = snd_hda_jack_tbl_get(codec, cb->nid);
|
|
if (tbl)
|
|
tbl->block_report = 1;
|
|
schedule_delayed_work(&spec->unsol_hp_work, msecs_to_jiffies(500));
|
|
}
|
|
|
|
static void amic_callback(struct hda_codec *codec, struct hda_jack_callback *cb)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
if (ca0132_use_alt_functions(spec))
|
|
ca0132_alt_select_in(codec);
|
|
else
|
|
ca0132_select_mic(codec);
|
|
}
|
|
|
|
static void ca0132_init_unsol(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
snd_hda_jack_detect_enable_callback(codec, spec->unsol_tag_hp, hp_callback);
|
|
snd_hda_jack_detect_enable_callback(codec, spec->unsol_tag_amic1,
|
|
amic_callback);
|
|
snd_hda_jack_detect_enable_callback(codec, UNSOL_TAG_DSP,
|
|
ca0132_process_dsp_response);
|
|
/* Front headphone jack detection */
|
|
if (ca0132_use_alt_functions(spec))
|
|
snd_hda_jack_detect_enable_callback(codec,
|
|
spec->unsol_tag_front_hp, hp_callback);
|
|
}
|
|
|
|
/*
|
|
* Verbs tables.
|
|
*/
|
|
|
|
/* Sends before DSP download. */
|
|
static struct hda_verb ca0132_base_init_verbs[] = {
|
|
/*enable ct extension*/
|
|
{0x15, VENDOR_CHIPIO_CT_EXTENSIONS_ENABLE, 0x1},
|
|
{}
|
|
};
|
|
|
|
/* Send at exit. */
|
|
static struct hda_verb ca0132_base_exit_verbs[] = {
|
|
/*set afg to D3*/
|
|
{0x01, AC_VERB_SET_POWER_STATE, 0x03},
|
|
/*disable ct extension*/
|
|
{0x15, VENDOR_CHIPIO_CT_EXTENSIONS_ENABLE, 0},
|
|
{}
|
|
};
|
|
|
|
/* Other verbs tables. Sends after DSP download. */
|
|
|
|
static struct hda_verb ca0132_init_verbs0[] = {
|
|
/* chip init verbs */
|
|
{0x15, 0x70D, 0xF0},
|
|
{0x15, 0x70E, 0xFE},
|
|
{0x15, 0x707, 0x75},
|
|
{0x15, 0x707, 0xD3},
|
|
{0x15, 0x707, 0x09},
|
|
{0x15, 0x707, 0x53},
|
|
{0x15, 0x707, 0xD4},
|
|
{0x15, 0x707, 0xEF},
|
|
{0x15, 0x707, 0x75},
|
|
{0x15, 0x707, 0xD3},
|
|
{0x15, 0x707, 0x09},
|
|
{0x15, 0x707, 0x02},
|
|
{0x15, 0x707, 0x37},
|
|
{0x15, 0x707, 0x78},
|
|
{0x15, 0x53C, 0xCE},
|
|
{0x15, 0x575, 0xC9},
|
|
{0x15, 0x53D, 0xCE},
|
|
{0x15, 0x5B7, 0xC9},
|
|
{0x15, 0x70D, 0xE8},
|
|
{0x15, 0x70E, 0xFE},
|
|
{0x15, 0x707, 0x02},
|
|
{0x15, 0x707, 0x68},
|
|
{0x15, 0x707, 0x62},
|
|
{0x15, 0x53A, 0xCE},
|
|
{0x15, 0x546, 0xC9},
|
|
{0x15, 0x53B, 0xCE},
|
|
{0x15, 0x5E8, 0xC9},
|
|
{}
|
|
};
|
|
|
|
/* Extra init verbs for desktop cards. */
|
|
static struct hda_verb ca0132_init_verbs1[] = {
|
|
{0x15, 0x70D, 0x20},
|
|
{0x15, 0x70E, 0x19},
|
|
{0x15, 0x707, 0x00},
|
|
{0x15, 0x539, 0xCE},
|
|
{0x15, 0x546, 0xC9},
|
|
{0x15, 0x70D, 0xB7},
|
|
{0x15, 0x70E, 0x09},
|
|
{0x15, 0x707, 0x10},
|
|
{0x15, 0x70D, 0xAF},
|
|
{0x15, 0x70E, 0x09},
|
|
{0x15, 0x707, 0x01},
|
|
{0x15, 0x707, 0x05},
|
|
{0x15, 0x70D, 0x73},
|
|
{0x15, 0x70E, 0x09},
|
|
{0x15, 0x707, 0x14},
|
|
{0x15, 0x6FF, 0xC4},
|
|
{}
|
|
};
|
|
|
|
static void ca0132_init_chip(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
int num_fx;
|
|
int i;
|
|
unsigned int on;
|
|
|
|
mutex_init(&spec->chipio_mutex);
|
|
|
|
spec->cur_out_type = SPEAKER_OUT;
|
|
if (!ca0132_use_alt_functions(spec))
|
|
spec->cur_mic_type = DIGITAL_MIC;
|
|
else
|
|
spec->cur_mic_type = REAR_MIC;
|
|
|
|
spec->cur_mic_boost = 0;
|
|
|
|
for (i = 0; i < VNODES_COUNT; i++) {
|
|
spec->vnode_lvol[i] = 0x5a;
|
|
spec->vnode_rvol[i] = 0x5a;
|
|
spec->vnode_lswitch[i] = 0;
|
|
spec->vnode_rswitch[i] = 0;
|
|
}
|
|
|
|
/*
|
|
* Default states for effects are in ca0132_effects[].
|
|
*/
|
|
num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT;
|
|
for (i = 0; i < num_fx; i++) {
|
|
on = (unsigned int)ca0132_effects[i].reqs[0];
|
|
spec->effects_switch[i] = on ? 1 : 0;
|
|
}
|
|
/*
|
|
* Sets defaults for the effect slider controls, only for alternative
|
|
* ca0132 codecs. Also sets x-bass crossover frequency to 80hz.
|
|
*/
|
|
if (ca0132_use_alt_controls(spec)) {
|
|
spec->xbass_xover_freq = 8;
|
|
for (i = 0; i < EFFECT_LEVEL_SLIDERS; i++)
|
|
spec->fx_ctl_val[i] = effect_slider_defaults[i];
|
|
}
|
|
|
|
spec->voicefx_val = 0;
|
|
spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID] = 1;
|
|
spec->effects_switch[CRYSTAL_VOICE - EFFECT_START_NID] = 0;
|
|
|
|
/*
|
|
* The ZxR doesn't have a front panel header, and it's line-in is on
|
|
* the daughter board. So, there is no input enum control, and we need
|
|
* to make sure that spec->in_enum_val is set properly.
|
|
*/
|
|
if (ca0132_quirk(spec) == QUIRK_ZXR)
|
|
spec->in_enum_val = REAR_MIC;
|
|
|
|
#ifdef ENABLE_TUNING_CONTROLS
|
|
ca0132_init_tuning_defaults(codec);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Recon3Di exit specific commands.
|
|
*/
|
|
/* prevents popping noise on shutdown */
|
|
static void r3di_gpio_shutdown(struct hda_codec *codec)
|
|
{
|
|
snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA, 0x00);
|
|
}
|
|
|
|
/*
|
|
* Sound Blaster Z exit specific commands.
|
|
*/
|
|
static void sbz_region2_exit(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < 4; i++)
|
|
writeb(0x0, spec->mem_base + 0x100);
|
|
for (i = 0; i < 8; i++)
|
|
writeb(0xb3, spec->mem_base + 0x304);
|
|
|
|
ca0113_mmio_gpio_set(codec, 0, false);
|
|
ca0113_mmio_gpio_set(codec, 1, false);
|
|
ca0113_mmio_gpio_set(codec, 4, true);
|
|
ca0113_mmio_gpio_set(codec, 5, false);
|
|
ca0113_mmio_gpio_set(codec, 7, false);
|
|
}
|
|
|
|
static void sbz_set_pin_ctl_default(struct hda_codec *codec)
|
|
{
|
|
static const hda_nid_t pins[] = {0x0B, 0x0C, 0x0E, 0x12, 0x13};
|
|
unsigned int i;
|
|
|
|
snd_hda_codec_write(codec, 0x11, 0,
|
|
AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(pins); i++)
|
|
snd_hda_codec_write(codec, pins[i], 0,
|
|
AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00);
|
|
}
|
|
|
|
static void ca0132_clear_unsolicited(struct hda_codec *codec)
|
|
{
|
|
static const hda_nid_t pins[] = {0x0B, 0x0E, 0x0F, 0x10, 0x11, 0x12, 0x13};
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(pins); i++) {
|
|
snd_hda_codec_write(codec, pins[i], 0,
|
|
AC_VERB_SET_UNSOLICITED_ENABLE, 0x00);
|
|
}
|
|
}
|
|
|
|
/* On shutdown, sends commands in sets of three */
|
|
static void sbz_gpio_shutdown_commands(struct hda_codec *codec, int dir,
|
|
int mask, int data)
|
|
{
|
|
if (dir >= 0)
|
|
snd_hda_codec_write(codec, 0x01, 0,
|
|
AC_VERB_SET_GPIO_DIRECTION, dir);
|
|
if (mask >= 0)
|
|
snd_hda_codec_write(codec, 0x01, 0,
|
|
AC_VERB_SET_GPIO_MASK, mask);
|
|
|
|
if (data >= 0)
|
|
snd_hda_codec_write(codec, 0x01, 0,
|
|
AC_VERB_SET_GPIO_DATA, data);
|
|
}
|
|
|
|
static void zxr_dbpro_power_state_shutdown(struct hda_codec *codec)
|
|
{
|
|
static const hda_nid_t pins[] = {0x05, 0x0c, 0x09, 0x0e, 0x08, 0x11, 0x01};
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(pins); i++)
|
|
snd_hda_codec_write(codec, pins[i], 0,
|
|
AC_VERB_SET_POWER_STATE, 0x03);
|
|
}
|
|
|
|
static void sbz_exit_chip(struct hda_codec *codec)
|
|
{
|
|
chipio_set_stream_control(codec, 0x03, 0);
|
|
chipio_set_stream_control(codec, 0x04, 0);
|
|
|
|
/* Mess with GPIO */
|
|
sbz_gpio_shutdown_commands(codec, 0x07, 0x07, -1);
|
|
sbz_gpio_shutdown_commands(codec, 0x07, 0x07, 0x05);
|
|
sbz_gpio_shutdown_commands(codec, 0x07, 0x07, 0x01);
|
|
|
|
chipio_set_stream_control(codec, 0x14, 0);
|
|
chipio_set_stream_control(codec, 0x0C, 0);
|
|
|
|
chipio_set_conn_rate(codec, 0x41, SR_192_000);
|
|
chipio_set_conn_rate(codec, 0x91, SR_192_000);
|
|
|
|
chipio_write(codec, 0x18a020, 0x00000083);
|
|
|
|
sbz_gpio_shutdown_commands(codec, 0x07, 0x07, 0x03);
|
|
sbz_gpio_shutdown_commands(codec, 0x07, 0x07, 0x07);
|
|
sbz_gpio_shutdown_commands(codec, 0x07, 0x07, 0x06);
|
|
|
|
chipio_set_stream_control(codec, 0x0C, 0);
|
|
|
|
chipio_set_control_param(codec, 0x0D, 0x24);
|
|
|
|
ca0132_clear_unsolicited(codec);
|
|
sbz_set_pin_ctl_default(codec);
|
|
|
|
snd_hda_codec_write(codec, 0x0B, 0,
|
|
AC_VERB_SET_EAPD_BTLENABLE, 0x00);
|
|
|
|
sbz_region2_exit(codec);
|
|
}
|
|
|
|
static void r3d_exit_chip(struct hda_codec *codec)
|
|
{
|
|
ca0132_clear_unsolicited(codec);
|
|
snd_hda_codec_write(codec, 0x01, 0, 0x793, 0x00);
|
|
snd_hda_codec_write(codec, 0x01, 0, 0x794, 0x5b);
|
|
}
|
|
|
|
static void ae5_exit_chip(struct hda_codec *codec)
|
|
{
|
|
chipio_set_stream_control(codec, 0x03, 0);
|
|
chipio_set_stream_control(codec, 0x04, 0);
|
|
|
|
ca0113_mmio_command_set(codec, 0x30, 0x32, 0x3f);
|
|
ca0113_mmio_command_set(codec, 0x48, 0x07, 0x83);
|
|
ca0113_mmio_command_set(codec, 0x48, 0x07, 0x83);
|
|
ca0113_mmio_command_set(codec, 0x30, 0x30, 0x00);
|
|
ca0113_mmio_command_set(codec, 0x30, 0x2b, 0x00);
|
|
ca0113_mmio_command_set(codec, 0x30, 0x2d, 0x00);
|
|
ca0113_mmio_gpio_set(codec, 0, false);
|
|
ca0113_mmio_gpio_set(codec, 1, false);
|
|
|
|
snd_hda_codec_write(codec, 0x01, 0, 0x793, 0x00);
|
|
snd_hda_codec_write(codec, 0x01, 0, 0x794, 0x53);
|
|
|
|
chipio_set_control_param(codec, CONTROL_PARAM_ASI, 0);
|
|
|
|
chipio_set_stream_control(codec, 0x18, 0);
|
|
chipio_set_stream_control(codec, 0x0c, 0);
|
|
|
|
snd_hda_codec_write(codec, 0x01, 0, 0x724, 0x83);
|
|
}
|
|
|
|
static void zxr_exit_chip(struct hda_codec *codec)
|
|
{
|
|
chipio_set_stream_control(codec, 0x03, 0);
|
|
chipio_set_stream_control(codec, 0x04, 0);
|
|
chipio_set_stream_control(codec, 0x14, 0);
|
|
chipio_set_stream_control(codec, 0x0C, 0);
|
|
|
|
chipio_set_conn_rate(codec, 0x41, SR_192_000);
|
|
chipio_set_conn_rate(codec, 0x91, SR_192_000);
|
|
|
|
chipio_write(codec, 0x18a020, 0x00000083);
|
|
|
|
snd_hda_codec_write(codec, 0x01, 0, 0x793, 0x00);
|
|
snd_hda_codec_write(codec, 0x01, 0, 0x794, 0x53);
|
|
|
|
ca0132_clear_unsolicited(codec);
|
|
sbz_set_pin_ctl_default(codec);
|
|
snd_hda_codec_write(codec, 0x0B, 0, AC_VERB_SET_EAPD_BTLENABLE, 0x00);
|
|
|
|
ca0113_mmio_gpio_set(codec, 5, false);
|
|
ca0113_mmio_gpio_set(codec, 2, false);
|
|
ca0113_mmio_gpio_set(codec, 3, false);
|
|
ca0113_mmio_gpio_set(codec, 0, false);
|
|
ca0113_mmio_gpio_set(codec, 4, true);
|
|
ca0113_mmio_gpio_set(codec, 0, true);
|
|
ca0113_mmio_gpio_set(codec, 5, true);
|
|
ca0113_mmio_gpio_set(codec, 2, false);
|
|
ca0113_mmio_gpio_set(codec, 3, false);
|
|
}
|
|
|
|
static void ca0132_exit_chip(struct hda_codec *codec)
|
|
{
|
|
/* put any chip cleanup stuffs here. */
|
|
|
|
if (dspload_is_loaded(codec))
|
|
dsp_reset(codec);
|
|
}
|
|
|
|
/*
|
|
* This fixes a problem that was hard to reproduce. Very rarely, I would
|
|
* boot up, and there would be no sound, but the DSP indicated it had loaded
|
|
* properly. I did a few memory dumps to see if anything was different, and
|
|
* there were a few areas of memory uninitialized with a1a2a3a4. This function
|
|
* checks if those areas are uninitialized, and if they are, it'll attempt to
|
|
* reload the card 3 times. Usually it fixes by the second.
|
|
*/
|
|
static void sbz_dsp_startup_check(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
unsigned int dsp_data_check[4];
|
|
unsigned int cur_address = 0x390;
|
|
unsigned int i;
|
|
unsigned int failure = 0;
|
|
unsigned int reload = 3;
|
|
|
|
if (spec->startup_check_entered)
|
|
return;
|
|
|
|
spec->startup_check_entered = true;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
chipio_read(codec, cur_address, &dsp_data_check[i]);
|
|
cur_address += 0x4;
|
|
}
|
|
for (i = 0; i < 4; i++) {
|
|
if (dsp_data_check[i] == 0xa1a2a3a4)
|
|
failure = 1;
|
|
}
|
|
|
|
codec_dbg(codec, "Startup Check: %d ", failure);
|
|
if (failure)
|
|
codec_info(codec, "DSP not initialized properly. Attempting to fix.");
|
|
/*
|
|
* While the failure condition is true, and we haven't reached our
|
|
* three reload limit, continue trying to reload the driver and
|
|
* fix the issue.
|
|
*/
|
|
while (failure && (reload != 0)) {
|
|
codec_info(codec, "Reloading... Tries left: %d", reload);
|
|
sbz_exit_chip(codec);
|
|
spec->dsp_state = DSP_DOWNLOAD_INIT;
|
|
codec->patch_ops.init(codec);
|
|
failure = 0;
|
|
for (i = 0; i < 4; i++) {
|
|
chipio_read(codec, cur_address, &dsp_data_check[i]);
|
|
cur_address += 0x4;
|
|
}
|
|
for (i = 0; i < 4; i++) {
|
|
if (dsp_data_check[i] == 0xa1a2a3a4)
|
|
failure = 1;
|
|
}
|
|
reload--;
|
|
}
|
|
|
|
if (!failure && reload < 3)
|
|
codec_info(codec, "DSP fixed.");
|
|
|
|
if (!failure)
|
|
return;
|
|
|
|
codec_info(codec, "DSP failed to initialize properly. Either try a full shutdown or a suspend to clear the internal memory.");
|
|
}
|
|
|
|
/*
|
|
* This is for the extra volume verbs 0x797 (left) and 0x798 (right). These add
|
|
* extra precision for decibel values. If you had the dB value in floating point
|
|
* you would take the value after the decimal point, multiply by 64, and divide
|
|
* by 2. So for 8.59, it's (59 * 64) / 100. Useful if someone wanted to
|
|
* implement fixed point or floating point dB volumes. For now, I'll set them
|
|
* to 0 just incase a value has lingered from a boot into Windows.
|
|
*/
|
|
static void ca0132_alt_vol_setup(struct hda_codec *codec)
|
|
{
|
|
snd_hda_codec_write(codec, 0x02, 0, 0x797, 0x00);
|
|
snd_hda_codec_write(codec, 0x02, 0, 0x798, 0x00);
|
|
snd_hda_codec_write(codec, 0x03, 0, 0x797, 0x00);
|
|
snd_hda_codec_write(codec, 0x03, 0, 0x798, 0x00);
|
|
snd_hda_codec_write(codec, 0x04, 0, 0x797, 0x00);
|
|
snd_hda_codec_write(codec, 0x04, 0, 0x798, 0x00);
|
|
snd_hda_codec_write(codec, 0x07, 0, 0x797, 0x00);
|
|
snd_hda_codec_write(codec, 0x07, 0, 0x798, 0x00);
|
|
}
|
|
|
|
/*
|
|
* Extra commands that don't really fit anywhere else.
|
|
*/
|
|
static void sbz_pre_dsp_setup(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
writel(0x00820680, spec->mem_base + 0x01C);
|
|
writel(0x00820680, spec->mem_base + 0x01C);
|
|
|
|
chipio_write(codec, 0x18b0a4, 0x000000c2);
|
|
|
|
snd_hda_codec_write(codec, 0x11, 0,
|
|
AC_VERB_SET_PIN_WIDGET_CONTROL, 0x44);
|
|
}
|
|
|
|
static void r3d_pre_dsp_setup(struct hda_codec *codec)
|
|
{
|
|
chipio_write(codec, 0x18b0a4, 0x000000c2);
|
|
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x1E);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_ADDRESS_HIGH, 0x1C);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_DATA_WRITE, 0x5B);
|
|
|
|
snd_hda_codec_write(codec, 0x11, 0,
|
|
AC_VERB_SET_PIN_WIDGET_CONTROL, 0x44);
|
|
}
|
|
|
|
static void r3di_pre_dsp_setup(struct hda_codec *codec)
|
|
{
|
|
chipio_write(codec, 0x18b0a4, 0x000000c2);
|
|
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x1E);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_ADDRESS_HIGH, 0x1C);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_DATA_WRITE, 0x5B);
|
|
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x20);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_ADDRESS_HIGH, 0x19);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_DATA_WRITE, 0x00);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_DATA_WRITE, 0x40);
|
|
|
|
snd_hda_codec_write(codec, 0x11, 0,
|
|
AC_VERB_SET_PIN_WIDGET_CONTROL, 0x04);
|
|
}
|
|
|
|
/*
|
|
* These are sent before the DSP is downloaded. Not sure
|
|
* what they do, or if they're necessary. Could possibly
|
|
* be removed. Figure they're better to leave in.
|
|
*/
|
|
static void ca0132_mmio_init(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
if (ca0132_quirk(spec) == QUIRK_AE5)
|
|
writel(0x00000001, spec->mem_base + 0x400);
|
|
else
|
|
writel(0x00000000, spec->mem_base + 0x400);
|
|
|
|
if (ca0132_quirk(spec) == QUIRK_AE5)
|
|
writel(0x00000001, spec->mem_base + 0x408);
|
|
else
|
|
writel(0x00000000, spec->mem_base + 0x408);
|
|
|
|
if (ca0132_quirk(spec) == QUIRK_AE5)
|
|
writel(0x00000001, spec->mem_base + 0x40c);
|
|
else
|
|
writel(0x00000000, spec->mem_base + 0x40C);
|
|
|
|
if (ca0132_quirk(spec) == QUIRK_ZXR)
|
|
writel(0x00880640, spec->mem_base + 0x01C);
|
|
else
|
|
writel(0x00880680, spec->mem_base + 0x01C);
|
|
|
|
if (ca0132_quirk(spec) == QUIRK_AE5)
|
|
writel(0x00000080, spec->mem_base + 0xC0C);
|
|
else
|
|
writel(0x00000083, spec->mem_base + 0xC0C);
|
|
|
|
writel(0x00000030, spec->mem_base + 0xC00);
|
|
writel(0x00000000, spec->mem_base + 0xC04);
|
|
|
|
if (ca0132_quirk(spec) == QUIRK_AE5)
|
|
writel(0x00000000, spec->mem_base + 0xC0C);
|
|
else
|
|
writel(0x00000003, spec->mem_base + 0xC0C);
|
|
|
|
writel(0x00000003, spec->mem_base + 0xC0C);
|
|
writel(0x00000003, spec->mem_base + 0xC0C);
|
|
writel(0x00000003, spec->mem_base + 0xC0C);
|
|
|
|
if (ca0132_quirk(spec) == QUIRK_AE5)
|
|
writel(0x00000001, spec->mem_base + 0xC08);
|
|
else
|
|
writel(0x000000C1, spec->mem_base + 0xC08);
|
|
|
|
writel(0x000000F1, spec->mem_base + 0xC08);
|
|
writel(0x00000001, spec->mem_base + 0xC08);
|
|
writel(0x000000C7, spec->mem_base + 0xC08);
|
|
writel(0x000000C1, spec->mem_base + 0xC08);
|
|
writel(0x00000080, spec->mem_base + 0xC04);
|
|
|
|
if (ca0132_quirk(spec) == QUIRK_AE5) {
|
|
writel(0x00000000, spec->mem_base + 0x42c);
|
|
writel(0x00000000, spec->mem_base + 0x46c);
|
|
writel(0x00000000, spec->mem_base + 0x4ac);
|
|
writel(0x00000000, spec->mem_base + 0x4ec);
|
|
writel(0x00000000, spec->mem_base + 0x43c);
|
|
writel(0x00000000, spec->mem_base + 0x47c);
|
|
writel(0x00000000, spec->mem_base + 0x4bc);
|
|
writel(0x00000000, spec->mem_base + 0x4fc);
|
|
writel(0x00000600, spec->mem_base + 0x100);
|
|
writel(0x00000014, spec->mem_base + 0x410);
|
|
writel(0x0000060f, spec->mem_base + 0x100);
|
|
writel(0x0000070f, spec->mem_base + 0x100);
|
|
writel(0x00000aff, spec->mem_base + 0x830);
|
|
writel(0x00000000, spec->mem_base + 0x86c);
|
|
writel(0x0000006b, spec->mem_base + 0x800);
|
|
writel(0x00000001, spec->mem_base + 0x86c);
|
|
writel(0x0000006b, spec->mem_base + 0x800);
|
|
writel(0x00000057, spec->mem_base + 0x804);
|
|
writel(0x00800000, spec->mem_base + 0x20c);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* This function writes to some SFR's, does some region2 writes, and then
|
|
* eventually resets the codec with the 0x7ff verb. Not quite sure why it does
|
|
* what it does.
|
|
*/
|
|
static void ae5_register_set(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
chipio_8051_write_direct(codec, 0x93, 0x10);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x44);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_PLL_PMU_WRITE, 0xc2);
|
|
|
|
writeb(0x0f, spec->mem_base + 0x304);
|
|
writeb(0x0f, spec->mem_base + 0x304);
|
|
writeb(0x0f, spec->mem_base + 0x304);
|
|
writeb(0x0f, spec->mem_base + 0x304);
|
|
writeb(0x0e, spec->mem_base + 0x100);
|
|
writeb(0x1f, spec->mem_base + 0x304);
|
|
writeb(0x0c, spec->mem_base + 0x100);
|
|
writeb(0x3f, spec->mem_base + 0x304);
|
|
writeb(0x08, spec->mem_base + 0x100);
|
|
writeb(0x7f, spec->mem_base + 0x304);
|
|
writeb(0x00, spec->mem_base + 0x100);
|
|
writeb(0xff, spec->mem_base + 0x304);
|
|
|
|
ca0113_mmio_command_set(codec, 0x30, 0x2d, 0x3f);
|
|
|
|
chipio_8051_write_direct(codec, 0x90, 0x00);
|
|
chipio_8051_write_direct(codec, 0x90, 0x10);
|
|
|
|
ca0113_mmio_command_set(codec, 0x48, 0x07, 0x83);
|
|
|
|
chipio_write(codec, 0x18b0a4, 0x000000c2);
|
|
|
|
snd_hda_codec_write(codec, 0x01, 0, 0x7ff, 0x00);
|
|
snd_hda_codec_write(codec, 0x01, 0, 0x7ff, 0x00);
|
|
}
|
|
|
|
/*
|
|
* Extra init functions for alternative ca0132 codecs. Done
|
|
* here so they don't clutter up the main ca0132_init function
|
|
* anymore than they have to.
|
|
*/
|
|
static void ca0132_alt_init(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
ca0132_alt_vol_setup(codec);
|
|
|
|
switch (ca0132_quirk(spec)) {
|
|
case QUIRK_SBZ:
|
|
codec_dbg(codec, "SBZ alt_init");
|
|
ca0132_gpio_init(codec);
|
|
sbz_pre_dsp_setup(codec);
|
|
snd_hda_sequence_write(codec, spec->chip_init_verbs);
|
|
snd_hda_sequence_write(codec, spec->desktop_init_verbs);
|
|
break;
|
|
case QUIRK_R3DI:
|
|
codec_dbg(codec, "R3DI alt_init");
|
|
ca0132_gpio_init(codec);
|
|
ca0132_gpio_setup(codec);
|
|
r3di_gpio_dsp_status_set(codec, R3DI_DSP_DOWNLOADING);
|
|
r3di_pre_dsp_setup(codec);
|
|
snd_hda_sequence_write(codec, spec->chip_init_verbs);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, 0x6FF, 0xC4);
|
|
break;
|
|
case QUIRK_R3D:
|
|
r3d_pre_dsp_setup(codec);
|
|
snd_hda_sequence_write(codec, spec->chip_init_verbs);
|
|
snd_hda_sequence_write(codec, spec->desktop_init_verbs);
|
|
break;
|
|
case QUIRK_AE5:
|
|
ca0132_gpio_init(codec);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x49);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_PLL_PMU_WRITE, 0x88);
|
|
chipio_write(codec, 0x18b030, 0x00000020);
|
|
snd_hda_sequence_write(codec, spec->chip_init_verbs);
|
|
snd_hda_sequence_write(codec, spec->desktop_init_verbs);
|
|
ca0113_mmio_command_set(codec, 0x30, 0x32, 0x3f);
|
|
break;
|
|
case QUIRK_ZXR:
|
|
snd_hda_sequence_write(codec, spec->chip_init_verbs);
|
|
snd_hda_sequence_write(codec, spec->desktop_init_verbs);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int ca0132_init(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
struct auto_pin_cfg *cfg = &spec->autocfg;
|
|
int i;
|
|
bool dsp_loaded;
|
|
|
|
/*
|
|
* If the DSP is already downloaded, and init has been entered again,
|
|
* there's only two reasons for it. One, the codec has awaken from a
|
|
* suspended state, and in that case dspload_is_loaded will return
|
|
* false, and the init will be ran again. The other reason it gets
|
|
* re entered is on startup for some reason it triggers a suspend and
|
|
* resume state. In this case, it will check if the DSP is downloaded,
|
|
* and not run the init function again. For codecs using alt_functions,
|
|
* it will check if the DSP is loaded properly.
|
|
*/
|
|
if (spec->dsp_state == DSP_DOWNLOADED) {
|
|
dsp_loaded = dspload_is_loaded(codec);
|
|
if (!dsp_loaded) {
|
|
spec->dsp_reload = true;
|
|
spec->dsp_state = DSP_DOWNLOAD_INIT;
|
|
} else {
|
|
if (ca0132_quirk(spec) == QUIRK_SBZ)
|
|
sbz_dsp_startup_check(codec);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
if (spec->dsp_state != DSP_DOWNLOAD_FAILED)
|
|
spec->dsp_state = DSP_DOWNLOAD_INIT;
|
|
spec->curr_chip_addx = INVALID_CHIP_ADDRESS;
|
|
|
|
if (ca0132_use_pci_mmio(spec))
|
|
ca0132_mmio_init(codec);
|
|
|
|
snd_hda_power_up_pm(codec);
|
|
|
|
if (ca0132_quirk(spec) == QUIRK_AE5)
|
|
ae5_register_set(codec);
|
|
|
|
ca0132_init_unsol(codec);
|
|
ca0132_init_params(codec);
|
|
ca0132_init_flags(codec);
|
|
|
|
snd_hda_sequence_write(codec, spec->base_init_verbs);
|
|
|
|
if (ca0132_use_alt_functions(spec))
|
|
ca0132_alt_init(codec);
|
|
|
|
ca0132_download_dsp(codec);
|
|
|
|
ca0132_refresh_widget_caps(codec);
|
|
|
|
switch (ca0132_quirk(spec)) {
|
|
case QUIRK_R3DI:
|
|
case QUIRK_R3D:
|
|
r3d_setup_defaults(codec);
|
|
break;
|
|
case QUIRK_SBZ:
|
|
case QUIRK_ZXR:
|
|
sbz_setup_defaults(codec);
|
|
break;
|
|
case QUIRK_AE5:
|
|
ae5_setup_defaults(codec);
|
|
break;
|
|
default:
|
|
ca0132_setup_defaults(codec);
|
|
ca0132_init_analog_mic2(codec);
|
|
ca0132_init_dmic(codec);
|
|
break;
|
|
}
|
|
|
|
for (i = 0; i < spec->num_outputs; i++)
|
|
init_output(codec, spec->out_pins[i], spec->dacs[0]);
|
|
|
|
init_output(codec, cfg->dig_out_pins[0], spec->dig_out);
|
|
|
|
for (i = 0; i < spec->num_inputs; i++)
|
|
init_input(codec, spec->input_pins[i], spec->adcs[i]);
|
|
|
|
init_input(codec, cfg->dig_in_pin, spec->dig_in);
|
|
|
|
if (!ca0132_use_alt_functions(spec)) {
|
|
snd_hda_sequence_write(codec, spec->chip_init_verbs);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_PARAM_EX_ID_SET, 0x0D);
|
|
snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
|
|
VENDOR_CHIPIO_PARAM_EX_VALUE_SET, 0x20);
|
|
}
|
|
|
|
if (ca0132_quirk(spec) == QUIRK_SBZ)
|
|
ca0132_gpio_setup(codec);
|
|
|
|
snd_hda_sequence_write(codec, spec->spec_init_verbs);
|
|
if (ca0132_use_alt_functions(spec)) {
|
|
ca0132_alt_select_out(codec);
|
|
ca0132_alt_select_in(codec);
|
|
} else {
|
|
ca0132_select_out(codec);
|
|
ca0132_select_mic(codec);
|
|
}
|
|
|
|
snd_hda_jack_report_sync(codec);
|
|
|
|
/*
|
|
* Re set the PlayEnhancement switch on a resume event, because the
|
|
* controls will not be reloaded.
|
|
*/
|
|
if (spec->dsp_reload) {
|
|
spec->dsp_reload = false;
|
|
ca0132_pe_switch_set(codec);
|
|
}
|
|
|
|
snd_hda_power_down_pm(codec);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dbpro_init(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
struct auto_pin_cfg *cfg = &spec->autocfg;
|
|
unsigned int i;
|
|
|
|
init_output(codec, cfg->dig_out_pins[0], spec->dig_out);
|
|
init_input(codec, cfg->dig_in_pin, spec->dig_in);
|
|
|
|
for (i = 0; i < spec->num_inputs; i++)
|
|
init_input(codec, spec->input_pins[i], spec->adcs[i]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ca0132_free(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
cancel_delayed_work_sync(&spec->unsol_hp_work);
|
|
snd_hda_power_up(codec);
|
|
switch (ca0132_quirk(spec)) {
|
|
case QUIRK_SBZ:
|
|
sbz_exit_chip(codec);
|
|
break;
|
|
case QUIRK_ZXR:
|
|
zxr_exit_chip(codec);
|
|
break;
|
|
case QUIRK_R3D:
|
|
r3d_exit_chip(codec);
|
|
break;
|
|
case QUIRK_AE5:
|
|
ae5_exit_chip(codec);
|
|
break;
|
|
case QUIRK_R3DI:
|
|
r3di_gpio_shutdown(codec);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
snd_hda_sequence_write(codec, spec->base_exit_verbs);
|
|
ca0132_exit_chip(codec);
|
|
|
|
snd_hda_power_down(codec);
|
|
#ifdef CONFIG_PCI
|
|
if (spec->mem_base)
|
|
pci_iounmap(codec->bus->pci, spec->mem_base);
|
|
#endif
|
|
kfree(spec->spec_init_verbs);
|
|
kfree(codec->spec);
|
|
}
|
|
|
|
static void dbpro_free(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
zxr_dbpro_power_state_shutdown(codec);
|
|
|
|
kfree(spec->spec_init_verbs);
|
|
kfree(codec->spec);
|
|
}
|
|
|
|
static void ca0132_reboot_notify(struct hda_codec *codec)
|
|
{
|
|
codec->patch_ops.free(codec);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int ca0132_suspend(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
cancel_delayed_work_sync(&spec->unsol_hp_work);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct hda_codec_ops ca0132_patch_ops = {
|
|
.build_controls = ca0132_build_controls,
|
|
.build_pcms = ca0132_build_pcms,
|
|
.init = ca0132_init,
|
|
.free = ca0132_free,
|
|
.unsol_event = snd_hda_jack_unsol_event,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ca0132_suspend,
|
|
#endif
|
|
.reboot_notify = ca0132_reboot_notify,
|
|
};
|
|
|
|
static const struct hda_codec_ops dbpro_patch_ops = {
|
|
.build_controls = dbpro_build_controls,
|
|
.build_pcms = dbpro_build_pcms,
|
|
.init = dbpro_init,
|
|
.free = dbpro_free,
|
|
};
|
|
|
|
static void ca0132_config(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
spec->dacs[0] = 0x2;
|
|
spec->dacs[1] = 0x3;
|
|
spec->dacs[2] = 0x4;
|
|
|
|
spec->multiout.dac_nids = spec->dacs;
|
|
spec->multiout.num_dacs = 3;
|
|
|
|
if (!ca0132_use_alt_functions(spec))
|
|
spec->multiout.max_channels = 2;
|
|
else
|
|
spec->multiout.max_channels = 6;
|
|
|
|
switch (ca0132_quirk(spec)) {
|
|
case QUIRK_ALIENWARE:
|
|
codec_dbg(codec, "%s: QUIRK_ALIENWARE applied.\n", __func__);
|
|
snd_hda_apply_pincfgs(codec, alienware_pincfgs);
|
|
break;
|
|
case QUIRK_SBZ:
|
|
codec_dbg(codec, "%s: QUIRK_SBZ applied.\n", __func__);
|
|
snd_hda_apply_pincfgs(codec, sbz_pincfgs);
|
|
break;
|
|
case QUIRK_ZXR:
|
|
codec_dbg(codec, "%s: QUIRK_ZXR applied.\n", __func__);
|
|
snd_hda_apply_pincfgs(codec, zxr_pincfgs);
|
|
break;
|
|
case QUIRK_R3D:
|
|
codec_dbg(codec, "%s: QUIRK_R3D applied.\n", __func__);
|
|
snd_hda_apply_pincfgs(codec, r3d_pincfgs);
|
|
break;
|
|
case QUIRK_R3DI:
|
|
codec_dbg(codec, "%s: QUIRK_R3DI applied.\n", __func__);
|
|
snd_hda_apply_pincfgs(codec, r3di_pincfgs);
|
|
break;
|
|
case QUIRK_AE5:
|
|
codec_dbg(codec, "%s: QUIRK_AE5 applied.\n", __func__);
|
|
snd_hda_apply_pincfgs(codec, ae5_pincfgs);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
switch (ca0132_quirk(spec)) {
|
|
case QUIRK_ALIENWARE:
|
|
spec->num_outputs = 2;
|
|
spec->out_pins[0] = 0x0b; /* speaker out */
|
|
spec->out_pins[1] = 0x0f;
|
|
spec->shared_out_nid = 0x2;
|
|
spec->unsol_tag_hp = 0x0f;
|
|
|
|
spec->adcs[0] = 0x7; /* digital mic / analog mic1 */
|
|
spec->adcs[1] = 0x8; /* analog mic2 */
|
|
spec->adcs[2] = 0xa; /* what u hear */
|
|
|
|
spec->num_inputs = 3;
|
|
spec->input_pins[0] = 0x12;
|
|
spec->input_pins[1] = 0x11;
|
|
spec->input_pins[2] = 0x13;
|
|
spec->shared_mic_nid = 0x7;
|
|
spec->unsol_tag_amic1 = 0x11;
|
|
break;
|
|
case QUIRK_SBZ:
|
|
case QUIRK_R3D:
|
|
spec->num_outputs = 2;
|
|
spec->out_pins[0] = 0x0B; /* Line out */
|
|
spec->out_pins[1] = 0x0F; /* Rear headphone out */
|
|
spec->out_pins[2] = 0x10; /* Front Headphone / Center/LFE*/
|
|
spec->out_pins[3] = 0x11; /* Rear surround */
|
|
spec->shared_out_nid = 0x2;
|
|
spec->unsol_tag_hp = spec->out_pins[1];
|
|
spec->unsol_tag_front_hp = spec->out_pins[2];
|
|
|
|
spec->adcs[0] = 0x7; /* Rear Mic / Line-in */
|
|
spec->adcs[1] = 0x8; /* Front Mic, but only if no DSP */
|
|
spec->adcs[2] = 0xa; /* what u hear */
|
|
|
|
spec->num_inputs = 2;
|
|
spec->input_pins[0] = 0x12; /* Rear Mic / Line-in */
|
|
spec->input_pins[1] = 0x13; /* What U Hear */
|
|
spec->shared_mic_nid = 0x7;
|
|
spec->unsol_tag_amic1 = spec->input_pins[0];
|
|
|
|
/* SPDIF I/O */
|
|
spec->dig_out = 0x05;
|
|
spec->multiout.dig_out_nid = spec->dig_out;
|
|
spec->dig_in = 0x09;
|
|
break;
|
|
case QUIRK_ZXR:
|
|
spec->num_outputs = 2;
|
|
spec->out_pins[0] = 0x0B; /* Line out */
|
|
spec->out_pins[1] = 0x0F; /* Rear headphone out */
|
|
spec->out_pins[2] = 0x10; /* Center/LFE */
|
|
spec->out_pins[3] = 0x11; /* Rear surround */
|
|
spec->shared_out_nid = 0x2;
|
|
spec->unsol_tag_hp = spec->out_pins[1];
|
|
spec->unsol_tag_front_hp = spec->out_pins[2];
|
|
|
|
spec->adcs[0] = 0x7; /* Rear Mic / Line-in */
|
|
spec->adcs[1] = 0x8; /* Not connected, no front mic */
|
|
spec->adcs[2] = 0xa; /* what u hear */
|
|
|
|
spec->num_inputs = 2;
|
|
spec->input_pins[0] = 0x12; /* Rear Mic / Line-in */
|
|
spec->input_pins[1] = 0x13; /* What U Hear */
|
|
spec->shared_mic_nid = 0x7;
|
|
spec->unsol_tag_amic1 = spec->input_pins[0];
|
|
break;
|
|
case QUIRK_ZXR_DBPRO:
|
|
spec->adcs[0] = 0x8; /* ZxR DBPro Aux In */
|
|
|
|
spec->num_inputs = 1;
|
|
spec->input_pins[0] = 0x11; /* RCA Line-in */
|
|
|
|
spec->dig_out = 0x05;
|
|
spec->multiout.dig_out_nid = spec->dig_out;
|
|
|
|
spec->dig_in = 0x09;
|
|
break;
|
|
case QUIRK_AE5:
|
|
spec->num_outputs = 2;
|
|
spec->out_pins[0] = 0x0B; /* Line out */
|
|
spec->out_pins[1] = 0x11; /* Rear headphone out */
|
|
spec->out_pins[2] = 0x10; /* Front Headphone / Center/LFE*/
|
|
spec->out_pins[3] = 0x0F; /* Rear surround */
|
|
spec->shared_out_nid = 0x2;
|
|
spec->unsol_tag_hp = spec->out_pins[1];
|
|
spec->unsol_tag_front_hp = spec->out_pins[2];
|
|
|
|
spec->adcs[0] = 0x7; /* Rear Mic / Line-in */
|
|
spec->adcs[1] = 0x8; /* Front Mic, but only if no DSP */
|
|
spec->adcs[2] = 0xa; /* what u hear */
|
|
|
|
spec->num_inputs = 2;
|
|
spec->input_pins[0] = 0x12; /* Rear Mic / Line-in */
|
|
spec->input_pins[1] = 0x13; /* What U Hear */
|
|
spec->shared_mic_nid = 0x7;
|
|
spec->unsol_tag_amic1 = spec->input_pins[0];
|
|
|
|
/* SPDIF I/O */
|
|
spec->dig_out = 0x05;
|
|
spec->multiout.dig_out_nid = spec->dig_out;
|
|
break;
|
|
case QUIRK_R3DI:
|
|
spec->num_outputs = 2;
|
|
spec->out_pins[0] = 0x0B; /* Line out */
|
|
spec->out_pins[1] = 0x0F; /* Rear headphone out */
|
|
spec->out_pins[2] = 0x10; /* Front Headphone / Center/LFE*/
|
|
spec->out_pins[3] = 0x11; /* Rear surround */
|
|
spec->shared_out_nid = 0x2;
|
|
spec->unsol_tag_hp = spec->out_pins[1];
|
|
spec->unsol_tag_front_hp = spec->out_pins[2];
|
|
|
|
spec->adcs[0] = 0x07; /* Rear Mic / Line-in */
|
|
spec->adcs[1] = 0x08; /* Front Mic, but only if no DSP */
|
|
spec->adcs[2] = 0x0a; /* what u hear */
|
|
|
|
spec->num_inputs = 2;
|
|
spec->input_pins[0] = 0x12; /* Rear Mic / Line-in */
|
|
spec->input_pins[1] = 0x13; /* What U Hear */
|
|
spec->shared_mic_nid = 0x7;
|
|
spec->unsol_tag_amic1 = spec->input_pins[0];
|
|
|
|
/* SPDIF I/O */
|
|
spec->dig_out = 0x05;
|
|
spec->multiout.dig_out_nid = spec->dig_out;
|
|
break;
|
|
default:
|
|
spec->num_outputs = 2;
|
|
spec->out_pins[0] = 0x0b; /* speaker out */
|
|
spec->out_pins[1] = 0x10; /* headphone out */
|
|
spec->shared_out_nid = 0x2;
|
|
spec->unsol_tag_hp = spec->out_pins[1];
|
|
|
|
spec->adcs[0] = 0x7; /* digital mic / analog mic1 */
|
|
spec->adcs[1] = 0x8; /* analog mic2 */
|
|
spec->adcs[2] = 0xa; /* what u hear */
|
|
|
|
spec->num_inputs = 3;
|
|
spec->input_pins[0] = 0x12;
|
|
spec->input_pins[1] = 0x11;
|
|
spec->input_pins[2] = 0x13;
|
|
spec->shared_mic_nid = 0x7;
|
|
spec->unsol_tag_amic1 = spec->input_pins[0];
|
|
|
|
/* SPDIF I/O */
|
|
spec->dig_out = 0x05;
|
|
spec->multiout.dig_out_nid = spec->dig_out;
|
|
spec->dig_in = 0x09;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int ca0132_prepare_verbs(struct hda_codec *codec)
|
|
{
|
|
/* Verbs + terminator (an empty element) */
|
|
#define NUM_SPEC_VERBS 2
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
spec->chip_init_verbs = ca0132_init_verbs0;
|
|
/*
|
|
* Since desktop cards use pci_mmio, this can be used to determine
|
|
* whether or not to use these verbs instead of a separate bool.
|
|
*/
|
|
if (ca0132_use_pci_mmio(spec))
|
|
spec->desktop_init_verbs = ca0132_init_verbs1;
|
|
spec->spec_init_verbs = kcalloc(NUM_SPEC_VERBS,
|
|
sizeof(struct hda_verb),
|
|
GFP_KERNEL);
|
|
if (!spec->spec_init_verbs)
|
|
return -ENOMEM;
|
|
|
|
/* config EAPD */
|
|
spec->spec_init_verbs[0].nid = 0x0b;
|
|
spec->spec_init_verbs[0].param = 0x78D;
|
|
spec->spec_init_verbs[0].verb = 0x00;
|
|
|
|
/* Previously commented configuration */
|
|
/*
|
|
spec->spec_init_verbs[2].nid = 0x0b;
|
|
spec->spec_init_verbs[2].param = AC_VERB_SET_EAPD_BTLENABLE;
|
|
spec->spec_init_verbs[2].verb = 0x02;
|
|
|
|
spec->spec_init_verbs[3].nid = 0x10;
|
|
spec->spec_init_verbs[3].param = 0x78D;
|
|
spec->spec_init_verbs[3].verb = 0x02;
|
|
|
|
spec->spec_init_verbs[4].nid = 0x10;
|
|
spec->spec_init_verbs[4].param = AC_VERB_SET_EAPD_BTLENABLE;
|
|
spec->spec_init_verbs[4].verb = 0x02;
|
|
*/
|
|
|
|
/* Terminator: spec->spec_init_verbs[NUM_SPEC_VERBS-1] */
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The Sound Blaster ZxR shares the same PCI subsystem ID as some regular
|
|
* Sound Blaster Z cards. However, they have different HDA codec subsystem
|
|
* ID's. So, we check for the ZxR's subsystem ID, as well as the DBPro
|
|
* daughter boards ID.
|
|
*/
|
|
static void sbz_detect_quirk(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec = codec->spec;
|
|
|
|
switch (codec->core.subsystem_id) {
|
|
case 0x11020033:
|
|
spec->quirk = QUIRK_ZXR;
|
|
break;
|
|
case 0x1102003f:
|
|
spec->quirk = QUIRK_ZXR_DBPRO;
|
|
break;
|
|
default:
|
|
spec->quirk = QUIRK_SBZ;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int patch_ca0132(struct hda_codec *codec)
|
|
{
|
|
struct ca0132_spec *spec;
|
|
int err;
|
|
const struct snd_pci_quirk *quirk;
|
|
|
|
codec_dbg(codec, "patch_ca0132\n");
|
|
|
|
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
|
|
if (!spec)
|
|
return -ENOMEM;
|
|
codec->spec = spec;
|
|
spec->codec = codec;
|
|
|
|
/* Detect codec quirk */
|
|
quirk = snd_pci_quirk_lookup(codec->bus->pci, ca0132_quirks);
|
|
if (quirk)
|
|
spec->quirk = quirk->value;
|
|
else
|
|
spec->quirk = QUIRK_NONE;
|
|
if (ca0132_quirk(spec) == QUIRK_SBZ)
|
|
sbz_detect_quirk(codec);
|
|
|
|
if (ca0132_quirk(spec) == QUIRK_ZXR_DBPRO)
|
|
codec->patch_ops = dbpro_patch_ops;
|
|
else
|
|
codec->patch_ops = ca0132_patch_ops;
|
|
|
|
codec->pcm_format_first = 1;
|
|
codec->no_sticky_stream = 1;
|
|
|
|
|
|
spec->dsp_state = DSP_DOWNLOAD_INIT;
|
|
spec->num_mixers = 1;
|
|
|
|
/* Set which mixers each quirk uses. */
|
|
switch (ca0132_quirk(spec)) {
|
|
case QUIRK_SBZ:
|
|
spec->mixers[0] = desktop_mixer;
|
|
snd_hda_codec_set_name(codec, "Sound Blaster Z");
|
|
break;
|
|
case QUIRK_ZXR:
|
|
spec->mixers[0] = desktop_mixer;
|
|
snd_hda_codec_set_name(codec, "Sound Blaster ZxR");
|
|
break;
|
|
case QUIRK_ZXR_DBPRO:
|
|
break;
|
|
case QUIRK_R3D:
|
|
spec->mixers[0] = desktop_mixer;
|
|
snd_hda_codec_set_name(codec, "Recon3D");
|
|
break;
|
|
case QUIRK_R3DI:
|
|
spec->mixers[0] = r3di_mixer;
|
|
snd_hda_codec_set_name(codec, "Recon3Di");
|
|
break;
|
|
case QUIRK_AE5:
|
|
spec->mixers[0] = desktop_mixer;
|
|
snd_hda_codec_set_name(codec, "Sound BlasterX AE-5");
|
|
break;
|
|
default:
|
|
spec->mixers[0] = ca0132_mixer;
|
|
break;
|
|
}
|
|
|
|
/* Setup whether or not to use alt functions/controls/pci_mmio */
|
|
switch (ca0132_quirk(spec)) {
|
|
case QUIRK_SBZ:
|
|
case QUIRK_R3D:
|
|
case QUIRK_AE5:
|
|
case QUIRK_ZXR:
|
|
spec->use_alt_controls = true;
|
|
spec->use_alt_functions = true;
|
|
spec->use_pci_mmio = true;
|
|
break;
|
|
case QUIRK_R3DI:
|
|
spec->use_alt_controls = true;
|
|
spec->use_alt_functions = true;
|
|
spec->use_pci_mmio = false;
|
|
break;
|
|
default:
|
|
spec->use_alt_controls = false;
|
|
spec->use_alt_functions = false;
|
|
spec->use_pci_mmio = false;
|
|
break;
|
|
}
|
|
|
|
#ifdef CONFIG_PCI
|
|
if (spec->use_pci_mmio) {
|
|
spec->mem_base = pci_iomap(codec->bus->pci, 2, 0xC20);
|
|
if (spec->mem_base == NULL) {
|
|
codec_warn(codec, "pci_iomap failed! Setting quirk to QUIRK_NONE.");
|
|
spec->quirk = QUIRK_NONE;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
spec->base_init_verbs = ca0132_base_init_verbs;
|
|
spec->base_exit_verbs = ca0132_base_exit_verbs;
|
|
|
|
INIT_DELAYED_WORK(&spec->unsol_hp_work, ca0132_unsol_hp_delayed);
|
|
|
|
ca0132_init_chip(codec);
|
|
|
|
ca0132_config(codec);
|
|
|
|
err = ca0132_prepare_verbs(codec);
|
|
if (err < 0)
|
|
goto error;
|
|
|
|
err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, NULL);
|
|
if (err < 0)
|
|
goto error;
|
|
|
|
return 0;
|
|
|
|
error:
|
|
ca0132_free(codec);
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* patch entries
|
|
*/
|
|
static struct hda_device_id snd_hda_id_ca0132[] = {
|
|
HDA_CODEC_ENTRY(0x11020011, "CA0132", patch_ca0132),
|
|
{} /* terminator */
|
|
};
|
|
MODULE_DEVICE_TABLE(hdaudio, snd_hda_id_ca0132);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("Creative Sound Core3D codec");
|
|
|
|
static struct hda_codec_driver ca0132_driver = {
|
|
.id = snd_hda_id_ca0132,
|
|
};
|
|
|
|
module_hda_codec_driver(ca0132_driver);
|