OpenCloudOS-Kernel/include/uapi/linux/ptrace.h

187 lines
5.4 KiB
C

/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
#ifndef _UAPI_LINUX_PTRACE_H
#define _UAPI_LINUX_PTRACE_H
/* ptrace.h */
/* structs and defines to help the user use the ptrace system call. */
/* has the defines to get at the registers. */
#include <linux/types.h>
#define PTRACE_TRACEME 0
#define PTRACE_PEEKTEXT 1
#define PTRACE_PEEKDATA 2
#define PTRACE_PEEKUSR 3
#define PTRACE_POKETEXT 4
#define PTRACE_POKEDATA 5
#define PTRACE_POKEUSR 6
#define PTRACE_CONT 7
#define PTRACE_KILL 8
#define PTRACE_SINGLESTEP 9
#define PTRACE_ATTACH 16
#define PTRACE_DETACH 17
#define PTRACE_SYSCALL 24
/* 0x4200-0x4300 are reserved for architecture-independent additions. */
#define PTRACE_SETOPTIONS 0x4200
#define PTRACE_GETEVENTMSG 0x4201
#define PTRACE_GETSIGINFO 0x4202
#define PTRACE_SETSIGINFO 0x4203
/*
* Generic ptrace interface that exports the architecture specific regsets
* using the corresponding NT_* types (which are also used in the core dump).
* Please note that the NT_PRSTATUS note type in a core dump contains a full
* 'struct elf_prstatus'. But the user_regset for NT_PRSTATUS contains just the
* elf_gregset_t that is the pr_reg field of 'struct elf_prstatus'. For all the
* other user_regset flavors, the user_regset layout and the ELF core dump note
* payload are exactly the same layout.
*
* This interface usage is as follows:
* struct iovec iov = { buf, len};
*
* ret = ptrace(PTRACE_GETREGSET/PTRACE_SETREGSET, pid, NT_XXX_TYPE, &iov);
*
* On the successful completion, iov.len will be updated by the kernel,
* specifying how much the kernel has written/read to/from the user's iov.buf.
*/
#define PTRACE_GETREGSET 0x4204
#define PTRACE_SETREGSET 0x4205
#define PTRACE_SEIZE 0x4206
#define PTRACE_INTERRUPT 0x4207
#define PTRACE_LISTEN 0x4208
#define PTRACE_PEEKSIGINFO 0x4209
struct ptrace_peeksiginfo_args {
__u64 off; /* from which siginfo to start */
__u32 flags;
__s32 nr; /* how may siginfos to take */
};
#define PTRACE_GETSIGMASK 0x420a
#define PTRACE_SETSIGMASK 0x420b
#define PTRACE_SECCOMP_GET_FILTER 0x420c
#define PTRACE_SECCOMP_GET_METADATA 0x420d
struct seccomp_metadata {
__u64 filter_off; /* Input: which filter */
__u64 flags; /* Output: filter's flags */
};
#define PTRACE_GET_SYSCALL_INFO 0x420e
#define PTRACE_SYSCALL_INFO_NONE 0
#define PTRACE_SYSCALL_INFO_ENTRY 1
#define PTRACE_SYSCALL_INFO_EXIT 2
#define PTRACE_SYSCALL_INFO_SECCOMP 3
struct ptrace_syscall_info {
__u8 op; /* PTRACE_SYSCALL_INFO_* */
__u8 pad[3];
__u32 arch;
__u64 instruction_pointer;
__u64 stack_pointer;
union {
struct {
__u64 nr;
__u64 args[6];
} entry;
struct {
__s64 rval;
__u8 is_error;
} exit;
struct {
__u64 nr;
__u64 args[6];
__u32 ret_data;
} seccomp;
};
};
#define PTRACE_GET_RSEQ_CONFIGURATION 0x420f
struct ptrace_rseq_configuration {
__u64 rseq_abi_pointer;
__u32 rseq_abi_size;
__u32 signature;
__u32 flags;
__u32 pad;
};
#define PTRACE_SET_SYSCALL_USER_DISPATCH_CONFIG 0x4210
#define PTRACE_GET_SYSCALL_USER_DISPATCH_CONFIG 0x4211
/*
* struct ptrace_sud_config - Per-task configuration for Syscall User Dispatch
* @mode: One of PR_SYS_DISPATCH_ON or PR_SYS_DISPATCH_OFF
* @selector: Tracees user virtual address of SUD selector
* @offset: SUD exclusion area (virtual address)
* @len: Length of SUD exclusion area
*
* Used to get/set the syscall user dispatch configuration for a tracee.
* Selector is optional (may be NULL), and if invalid will produce
* a SIGSEGV in the tracee upon first access.
*
* If mode is PR_SYS_DISPATCH_ON, syscall dispatch will be enabled. If
* PR_SYS_DISPATCH_OFF, syscall dispatch will be disabled and all other
* parameters must be 0. The value in *selector (if not null), also determines
* whether syscall dispatch will occur.
*
* The Syscall User Dispatch Exclusion area described by offset/len is the
* virtual address space from which syscalls will not produce a user
* dispatch.
*/
struct ptrace_sud_config {
__u64 mode;
__u64 selector;
__u64 offset;
__u64 len;
};
/*
* These values are stored in task->ptrace_message
* by ptrace_stop to describe the current syscall-stop.
*/
#define PTRACE_EVENTMSG_SYSCALL_ENTRY 1
#define PTRACE_EVENTMSG_SYSCALL_EXIT 2
/* Read signals from a shared (process wide) queue */
#define PTRACE_PEEKSIGINFO_SHARED (1 << 0)
/* Wait extended result codes for the above trace options. */
#define PTRACE_EVENT_FORK 1
#define PTRACE_EVENT_VFORK 2
#define PTRACE_EVENT_CLONE 3
#define PTRACE_EVENT_EXEC 4
#define PTRACE_EVENT_VFORK_DONE 5
#define PTRACE_EVENT_EXIT 6
#define PTRACE_EVENT_SECCOMP 7
/* Extended result codes which enabled by means other than options. */
#define PTRACE_EVENT_STOP 128
/* Options set using PTRACE_SETOPTIONS or using PTRACE_SEIZE @data param */
#define PTRACE_O_TRACESYSGOOD 1
#define PTRACE_O_TRACEFORK (1 << PTRACE_EVENT_FORK)
#define PTRACE_O_TRACEVFORK (1 << PTRACE_EVENT_VFORK)
#define PTRACE_O_TRACECLONE (1 << PTRACE_EVENT_CLONE)
#define PTRACE_O_TRACEEXEC (1 << PTRACE_EVENT_EXEC)
#define PTRACE_O_TRACEVFORKDONE (1 << PTRACE_EVENT_VFORK_DONE)
#define PTRACE_O_TRACEEXIT (1 << PTRACE_EVENT_EXIT)
#define PTRACE_O_TRACESECCOMP (1 << PTRACE_EVENT_SECCOMP)
/* eventless options */
#define PTRACE_O_EXITKILL (1 << 20)
#define PTRACE_O_SUSPEND_SECCOMP (1 << 21)
#define PTRACE_O_MASK (\
0x000000ff | PTRACE_O_EXITKILL | PTRACE_O_SUSPEND_SECCOMP)
#include <asm/ptrace.h>
#endif /* _UAPI_LINUX_PTRACE_H */