8197 lines
220 KiB
C
8197 lines
220 KiB
C
/*======================================================================
|
|
|
|
Aironet driver for 4500 and 4800 series cards
|
|
|
|
This code is released under both the GPL version 2 and BSD licenses.
|
|
Either license may be used. The respective licenses are found at
|
|
the end of this file.
|
|
|
|
This code was developed by Benjamin Reed <breed@users.sourceforge.net>
|
|
including portions of which come from the Aironet PC4500
|
|
Developer's Reference Manual and used with permission. Copyright
|
|
(C) 1999 Benjamin Reed. All Rights Reserved. Permission to use
|
|
code in the Developer's manual was granted for this driver by
|
|
Aironet. Major code contributions were received from Javier Achirica
|
|
<achirica@users.sourceforge.net> and Jean Tourrilhes <jt@hpl.hp.com>.
|
|
Code was also integrated from the Cisco Aironet driver for Linux.
|
|
Support for MPI350 cards was added by Fabrice Bellet
|
|
<fabrice@bellet.info>.
|
|
|
|
======================================================================*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/smp_lock.h>
|
|
|
|
#include <linux/sched.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/in.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/scatterlist.h>
|
|
#include <linux/crypto.h>
|
|
#include <asm/io.h>
|
|
#include <asm/system.h>
|
|
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/if_arp.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/pci.h>
|
|
#include <asm/uaccess.h>
|
|
#include <net/ieee80211.h>
|
|
#include <linux/kthread.h>
|
|
#include <linux/freezer.h>
|
|
|
|
#include "airo.h"
|
|
|
|
#ifdef CONFIG_PCI
|
|
static struct pci_device_id card_ids[] = {
|
|
{ 0x14b9, 1, PCI_ANY_ID, PCI_ANY_ID, },
|
|
{ 0x14b9, 0x4500, PCI_ANY_ID, PCI_ANY_ID },
|
|
{ 0x14b9, 0x4800, PCI_ANY_ID, PCI_ANY_ID, },
|
|
{ 0x14b9, 0x0340, PCI_ANY_ID, PCI_ANY_ID, },
|
|
{ 0x14b9, 0x0350, PCI_ANY_ID, PCI_ANY_ID, },
|
|
{ 0x14b9, 0x5000, PCI_ANY_ID, PCI_ANY_ID, },
|
|
{ 0x14b9, 0xa504, PCI_ANY_ID, PCI_ANY_ID, },
|
|
{ 0, }
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, card_ids);
|
|
|
|
static int airo_pci_probe(struct pci_dev *, const struct pci_device_id *);
|
|
static void airo_pci_remove(struct pci_dev *);
|
|
static int airo_pci_suspend(struct pci_dev *pdev, pm_message_t state);
|
|
static int airo_pci_resume(struct pci_dev *pdev);
|
|
|
|
static struct pci_driver airo_driver = {
|
|
.name = "airo",
|
|
.id_table = card_ids,
|
|
.probe = airo_pci_probe,
|
|
.remove = __devexit_p(airo_pci_remove),
|
|
.suspend = airo_pci_suspend,
|
|
.resume = airo_pci_resume,
|
|
};
|
|
#endif /* CONFIG_PCI */
|
|
|
|
/* Include Wireless Extension definition and check version - Jean II */
|
|
#include <linux/wireless.h>
|
|
#define WIRELESS_SPY // enable iwspy support
|
|
#include <net/iw_handler.h> // New driver API
|
|
|
|
#define CISCO_EXT // enable Cisco extensions
|
|
#ifdef CISCO_EXT
|
|
#include <linux/delay.h>
|
|
#endif
|
|
|
|
/* Hack to do some power saving */
|
|
#define POWER_ON_DOWN
|
|
|
|
/* As you can see this list is HUGH!
|
|
I really don't know what a lot of these counts are about, but they
|
|
are all here for completeness. If the IGNLABEL macro is put in
|
|
infront of the label, that statistic will not be included in the list
|
|
of statistics in the /proc filesystem */
|
|
|
|
#define IGNLABEL(comment) NULL
|
|
static char *statsLabels[] = {
|
|
"RxOverrun",
|
|
IGNLABEL("RxPlcpCrcErr"),
|
|
IGNLABEL("RxPlcpFormatErr"),
|
|
IGNLABEL("RxPlcpLengthErr"),
|
|
"RxMacCrcErr",
|
|
"RxMacCrcOk",
|
|
"RxWepErr",
|
|
"RxWepOk",
|
|
"RetryLong",
|
|
"RetryShort",
|
|
"MaxRetries",
|
|
"NoAck",
|
|
"NoCts",
|
|
"RxAck",
|
|
"RxCts",
|
|
"TxAck",
|
|
"TxRts",
|
|
"TxCts",
|
|
"TxMc",
|
|
"TxBc",
|
|
"TxUcFrags",
|
|
"TxUcPackets",
|
|
"TxBeacon",
|
|
"RxBeacon",
|
|
"TxSinColl",
|
|
"TxMulColl",
|
|
"DefersNo",
|
|
"DefersProt",
|
|
"DefersEngy",
|
|
"DupFram",
|
|
"RxFragDisc",
|
|
"TxAged",
|
|
"RxAged",
|
|
"LostSync-MaxRetry",
|
|
"LostSync-MissedBeacons",
|
|
"LostSync-ArlExceeded",
|
|
"LostSync-Deauth",
|
|
"LostSync-Disassoced",
|
|
"LostSync-TsfTiming",
|
|
"HostTxMc",
|
|
"HostTxBc",
|
|
"HostTxUc",
|
|
"HostTxFail",
|
|
"HostRxMc",
|
|
"HostRxBc",
|
|
"HostRxUc",
|
|
"HostRxDiscard",
|
|
IGNLABEL("HmacTxMc"),
|
|
IGNLABEL("HmacTxBc"),
|
|
IGNLABEL("HmacTxUc"),
|
|
IGNLABEL("HmacTxFail"),
|
|
IGNLABEL("HmacRxMc"),
|
|
IGNLABEL("HmacRxBc"),
|
|
IGNLABEL("HmacRxUc"),
|
|
IGNLABEL("HmacRxDiscard"),
|
|
IGNLABEL("HmacRxAccepted"),
|
|
"SsidMismatch",
|
|
"ApMismatch",
|
|
"RatesMismatch",
|
|
"AuthReject",
|
|
"AuthTimeout",
|
|
"AssocReject",
|
|
"AssocTimeout",
|
|
IGNLABEL("ReasonOutsideTable"),
|
|
IGNLABEL("ReasonStatus1"),
|
|
IGNLABEL("ReasonStatus2"),
|
|
IGNLABEL("ReasonStatus3"),
|
|
IGNLABEL("ReasonStatus4"),
|
|
IGNLABEL("ReasonStatus5"),
|
|
IGNLABEL("ReasonStatus6"),
|
|
IGNLABEL("ReasonStatus7"),
|
|
IGNLABEL("ReasonStatus8"),
|
|
IGNLABEL("ReasonStatus9"),
|
|
IGNLABEL("ReasonStatus10"),
|
|
IGNLABEL("ReasonStatus11"),
|
|
IGNLABEL("ReasonStatus12"),
|
|
IGNLABEL("ReasonStatus13"),
|
|
IGNLABEL("ReasonStatus14"),
|
|
IGNLABEL("ReasonStatus15"),
|
|
IGNLABEL("ReasonStatus16"),
|
|
IGNLABEL("ReasonStatus17"),
|
|
IGNLABEL("ReasonStatus18"),
|
|
IGNLABEL("ReasonStatus19"),
|
|
"RxMan",
|
|
"TxMan",
|
|
"RxRefresh",
|
|
"TxRefresh",
|
|
"RxPoll",
|
|
"TxPoll",
|
|
"HostRetries",
|
|
"LostSync-HostReq",
|
|
"HostTxBytes",
|
|
"HostRxBytes",
|
|
"ElapsedUsec",
|
|
"ElapsedSec",
|
|
"LostSyncBetterAP",
|
|
"PrivacyMismatch",
|
|
"Jammed",
|
|
"DiscRxNotWepped",
|
|
"PhyEleMismatch",
|
|
(char*)-1 };
|
|
#ifndef RUN_AT
|
|
#define RUN_AT(x) (jiffies+(x))
|
|
#endif
|
|
|
|
|
|
/* These variables are for insmod, since it seems that the rates
|
|
can only be set in setup_card. Rates should be a comma separated
|
|
(no spaces) list of rates (up to 8). */
|
|
|
|
static int rates[8];
|
|
static int basic_rate;
|
|
static char *ssids[3];
|
|
|
|
static int io[4];
|
|
static int irq[4];
|
|
|
|
static
|
|
int maxencrypt /* = 0 */; /* The highest rate that the card can encrypt at.
|
|
0 means no limit. For old cards this was 4 */
|
|
|
|
static int auto_wep /* = 0 */; /* If set, it tries to figure out the wep mode */
|
|
static int aux_bap /* = 0 */; /* Checks to see if the aux ports are needed to read
|
|
the bap, needed on some older cards and buses. */
|
|
static int adhoc;
|
|
|
|
static int probe = 1;
|
|
|
|
static int proc_uid /* = 0 */;
|
|
|
|
static int proc_gid /* = 0 */;
|
|
|
|
static int airo_perm = 0555;
|
|
|
|
static int proc_perm = 0644;
|
|
|
|
MODULE_AUTHOR("Benjamin Reed");
|
|
MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet \
|
|
cards. Direct support for ISA/PCI/MPI cards and support \
|
|
for PCMCIA when used with airo_cs.");
|
|
MODULE_LICENSE("Dual BSD/GPL");
|
|
MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340/350");
|
|
module_param_array(io, int, NULL, 0);
|
|
module_param_array(irq, int, NULL, 0);
|
|
module_param(basic_rate, int, 0);
|
|
module_param_array(rates, int, NULL, 0);
|
|
module_param_array(ssids, charp, NULL, 0);
|
|
module_param(auto_wep, int, 0);
|
|
MODULE_PARM_DESC(auto_wep, "If non-zero, the driver will keep looping through \
|
|
the authentication options until an association is made. The value of \
|
|
auto_wep is number of the wep keys to check. A value of 2 will try using \
|
|
the key at index 0 and index 1.");
|
|
module_param(aux_bap, int, 0);
|
|
MODULE_PARM_DESC(aux_bap, "If non-zero, the driver will switch into a mode \
|
|
than seems to work better for older cards with some older buses. Before \
|
|
switching it checks that the switch is needed.");
|
|
module_param(maxencrypt, int, 0);
|
|
MODULE_PARM_DESC(maxencrypt, "The maximum speed that the card can do \
|
|
encryption. Units are in 512kbs. Zero (default) means there is no limit. \
|
|
Older cards used to be limited to 2mbs (4).");
|
|
module_param(adhoc, int, 0);
|
|
MODULE_PARM_DESC(adhoc, "If non-zero, the card will start in adhoc mode.");
|
|
module_param(probe, int, 0);
|
|
MODULE_PARM_DESC(probe, "If zero, the driver won't start the card.");
|
|
|
|
module_param(proc_uid, int, 0);
|
|
MODULE_PARM_DESC(proc_uid, "The uid that the /proc files will belong to.");
|
|
module_param(proc_gid, int, 0);
|
|
MODULE_PARM_DESC(proc_gid, "The gid that the /proc files will belong to.");
|
|
module_param(airo_perm, int, 0);
|
|
MODULE_PARM_DESC(airo_perm, "The permission bits of /proc/[driver/]aironet.");
|
|
module_param(proc_perm, int, 0);
|
|
MODULE_PARM_DESC(proc_perm, "The permission bits of the files in /proc");
|
|
|
|
/* This is a kind of sloppy hack to get this information to OUT4500 and
|
|
IN4500. I would be extremely interested in the situation where this
|
|
doesn't work though!!! */
|
|
static int do8bitIO = 0;
|
|
|
|
/* Return codes */
|
|
#define SUCCESS 0
|
|
#define ERROR -1
|
|
#define NO_PACKET -2
|
|
|
|
/* Commands */
|
|
#define NOP2 0x0000
|
|
#define MAC_ENABLE 0x0001
|
|
#define MAC_DISABLE 0x0002
|
|
#define CMD_LOSE_SYNC 0x0003 /* Not sure what this does... */
|
|
#define CMD_SOFTRESET 0x0004
|
|
#define HOSTSLEEP 0x0005
|
|
#define CMD_MAGIC_PKT 0x0006
|
|
#define CMD_SETWAKEMASK 0x0007
|
|
#define CMD_READCFG 0x0008
|
|
#define CMD_SETMODE 0x0009
|
|
#define CMD_ALLOCATETX 0x000a
|
|
#define CMD_TRANSMIT 0x000b
|
|
#define CMD_DEALLOCATETX 0x000c
|
|
#define NOP 0x0010
|
|
#define CMD_WORKAROUND 0x0011
|
|
#define CMD_ALLOCATEAUX 0x0020
|
|
#define CMD_ACCESS 0x0021
|
|
#define CMD_PCIBAP 0x0022
|
|
#define CMD_PCIAUX 0x0023
|
|
#define CMD_ALLOCBUF 0x0028
|
|
#define CMD_GETTLV 0x0029
|
|
#define CMD_PUTTLV 0x002a
|
|
#define CMD_DELTLV 0x002b
|
|
#define CMD_FINDNEXTTLV 0x002c
|
|
#define CMD_PSPNODES 0x0030
|
|
#define CMD_SETCW 0x0031
|
|
#define CMD_SETPCF 0x0032
|
|
#define CMD_SETPHYREG 0x003e
|
|
#define CMD_TXTEST 0x003f
|
|
#define MAC_ENABLETX 0x0101
|
|
#define CMD_LISTBSS 0x0103
|
|
#define CMD_SAVECFG 0x0108
|
|
#define CMD_ENABLEAUX 0x0111
|
|
#define CMD_WRITERID 0x0121
|
|
#define CMD_USEPSPNODES 0x0130
|
|
#define MAC_ENABLERX 0x0201
|
|
|
|
/* Command errors */
|
|
#define ERROR_QUALIF 0x00
|
|
#define ERROR_ILLCMD 0x01
|
|
#define ERROR_ILLFMT 0x02
|
|
#define ERROR_INVFID 0x03
|
|
#define ERROR_INVRID 0x04
|
|
#define ERROR_LARGE 0x05
|
|
#define ERROR_NDISABL 0x06
|
|
#define ERROR_ALLOCBSY 0x07
|
|
#define ERROR_NORD 0x0B
|
|
#define ERROR_NOWR 0x0C
|
|
#define ERROR_INVFIDTX 0x0D
|
|
#define ERROR_TESTACT 0x0E
|
|
#define ERROR_TAGNFND 0x12
|
|
#define ERROR_DECODE 0x20
|
|
#define ERROR_DESCUNAV 0x21
|
|
#define ERROR_BADLEN 0x22
|
|
#define ERROR_MODE 0x80
|
|
#define ERROR_HOP 0x81
|
|
#define ERROR_BINTER 0x82
|
|
#define ERROR_RXMODE 0x83
|
|
#define ERROR_MACADDR 0x84
|
|
#define ERROR_RATES 0x85
|
|
#define ERROR_ORDER 0x86
|
|
#define ERROR_SCAN 0x87
|
|
#define ERROR_AUTH 0x88
|
|
#define ERROR_PSMODE 0x89
|
|
#define ERROR_RTYPE 0x8A
|
|
#define ERROR_DIVER 0x8B
|
|
#define ERROR_SSID 0x8C
|
|
#define ERROR_APLIST 0x8D
|
|
#define ERROR_AUTOWAKE 0x8E
|
|
#define ERROR_LEAP 0x8F
|
|
|
|
/* Registers */
|
|
#define COMMAND 0x00
|
|
#define PARAM0 0x02
|
|
#define PARAM1 0x04
|
|
#define PARAM2 0x06
|
|
#define STATUS 0x08
|
|
#define RESP0 0x0a
|
|
#define RESP1 0x0c
|
|
#define RESP2 0x0e
|
|
#define LINKSTAT 0x10
|
|
#define SELECT0 0x18
|
|
#define OFFSET0 0x1c
|
|
#define RXFID 0x20
|
|
#define TXALLOCFID 0x22
|
|
#define TXCOMPLFID 0x24
|
|
#define DATA0 0x36
|
|
#define EVSTAT 0x30
|
|
#define EVINTEN 0x32
|
|
#define EVACK 0x34
|
|
#define SWS0 0x28
|
|
#define SWS1 0x2a
|
|
#define SWS2 0x2c
|
|
#define SWS3 0x2e
|
|
#define AUXPAGE 0x3A
|
|
#define AUXOFF 0x3C
|
|
#define AUXDATA 0x3E
|
|
|
|
#define FID_TX 1
|
|
#define FID_RX 2
|
|
/* Offset into aux memory for descriptors */
|
|
#define AUX_OFFSET 0x800
|
|
/* Size of allocated packets */
|
|
#define PKTSIZE 1840
|
|
#define RIDSIZE 2048
|
|
/* Size of the transmit queue */
|
|
#define MAXTXQ 64
|
|
|
|
/* BAP selectors */
|
|
#define BAP0 0 // Used for receiving packets
|
|
#define BAP1 2 // Used for xmiting packets and working with RIDS
|
|
|
|
/* Flags */
|
|
#define COMMAND_BUSY 0x8000
|
|
|
|
#define BAP_BUSY 0x8000
|
|
#define BAP_ERR 0x4000
|
|
#define BAP_DONE 0x2000
|
|
|
|
#define PROMISC 0xffff
|
|
#define NOPROMISC 0x0000
|
|
|
|
#define EV_CMD 0x10
|
|
#define EV_CLEARCOMMANDBUSY 0x4000
|
|
#define EV_RX 0x01
|
|
#define EV_TX 0x02
|
|
#define EV_TXEXC 0x04
|
|
#define EV_ALLOC 0x08
|
|
#define EV_LINK 0x80
|
|
#define EV_AWAKE 0x100
|
|
#define EV_TXCPY 0x400
|
|
#define EV_UNKNOWN 0x800
|
|
#define EV_MIC 0x1000 /* Message Integrity Check Interrupt */
|
|
#define EV_AWAKEN 0x2000
|
|
#define STATUS_INTS (EV_AWAKE|EV_LINK|EV_TXEXC|EV_TX|EV_TXCPY|EV_RX|EV_MIC)
|
|
|
|
#ifdef CHECK_UNKNOWN_INTS
|
|
#define IGNORE_INTS ( EV_CMD | EV_UNKNOWN)
|
|
#else
|
|
#define IGNORE_INTS (~STATUS_INTS)
|
|
#endif
|
|
|
|
/* RID TYPES */
|
|
#define RID_RW 0x20
|
|
|
|
/* The RIDs */
|
|
#define RID_CAPABILITIES 0xFF00
|
|
#define RID_APINFO 0xFF01
|
|
#define RID_RADIOINFO 0xFF02
|
|
#define RID_UNKNOWN3 0xFF03
|
|
#define RID_RSSI 0xFF04
|
|
#define RID_CONFIG 0xFF10
|
|
#define RID_SSID 0xFF11
|
|
#define RID_APLIST 0xFF12
|
|
#define RID_DRVNAME 0xFF13
|
|
#define RID_ETHERENCAP 0xFF14
|
|
#define RID_WEP_TEMP 0xFF15
|
|
#define RID_WEP_PERM 0xFF16
|
|
#define RID_MODULATION 0xFF17
|
|
#define RID_OPTIONS 0xFF18
|
|
#define RID_ACTUALCONFIG 0xFF20 /*readonly*/
|
|
#define RID_FACTORYCONFIG 0xFF21
|
|
#define RID_UNKNOWN22 0xFF22
|
|
#define RID_LEAPUSERNAME 0xFF23
|
|
#define RID_LEAPPASSWORD 0xFF24
|
|
#define RID_STATUS 0xFF50
|
|
#define RID_BEACON_HST 0xFF51
|
|
#define RID_BUSY_HST 0xFF52
|
|
#define RID_RETRIES_HST 0xFF53
|
|
#define RID_UNKNOWN54 0xFF54
|
|
#define RID_UNKNOWN55 0xFF55
|
|
#define RID_UNKNOWN56 0xFF56
|
|
#define RID_MIC 0xFF57
|
|
#define RID_STATS16 0xFF60
|
|
#define RID_STATS16DELTA 0xFF61
|
|
#define RID_STATS16DELTACLEAR 0xFF62
|
|
#define RID_STATS 0xFF68
|
|
#define RID_STATSDELTA 0xFF69
|
|
#define RID_STATSDELTACLEAR 0xFF6A
|
|
#define RID_ECHOTEST_RID 0xFF70
|
|
#define RID_ECHOTEST_RESULTS 0xFF71
|
|
#define RID_BSSLISTFIRST 0xFF72
|
|
#define RID_BSSLISTNEXT 0xFF73
|
|
#define RID_WPA_BSSLISTFIRST 0xFF74
|
|
#define RID_WPA_BSSLISTNEXT 0xFF75
|
|
|
|
typedef struct {
|
|
u16 cmd;
|
|
u16 parm0;
|
|
u16 parm1;
|
|
u16 parm2;
|
|
} Cmd;
|
|
|
|
typedef struct {
|
|
u16 status;
|
|
u16 rsp0;
|
|
u16 rsp1;
|
|
u16 rsp2;
|
|
} Resp;
|
|
|
|
/*
|
|
* Rids and endian-ness: The Rids will always be in cpu endian, since
|
|
* this all the patches from the big-endian guys end up doing that.
|
|
* so all rid access should use the read/writeXXXRid routines.
|
|
*/
|
|
|
|
/* This is redundant for x86 archs, but it seems necessary for ARM */
|
|
#pragma pack(1)
|
|
|
|
/* This structure came from an email sent to me from an engineer at
|
|
aironet for inclusion into this driver */
|
|
typedef struct {
|
|
u16 len;
|
|
u16 kindex;
|
|
u8 mac[ETH_ALEN];
|
|
u16 klen;
|
|
u8 key[16];
|
|
} WepKeyRid;
|
|
|
|
/* These structures are from the Aironet's PC4500 Developers Manual */
|
|
typedef struct {
|
|
u16 len;
|
|
u8 ssid[32];
|
|
} Ssid;
|
|
|
|
typedef struct {
|
|
u16 len;
|
|
Ssid ssids[3];
|
|
} SsidRid;
|
|
|
|
typedef struct {
|
|
u16 len;
|
|
u16 modulation;
|
|
#define MOD_DEFAULT 0
|
|
#define MOD_CCK 1
|
|
#define MOD_MOK 2
|
|
} ModulationRid;
|
|
|
|
typedef struct {
|
|
u16 len; /* sizeof(ConfigRid) */
|
|
u16 opmode; /* operating mode */
|
|
#define MODE_STA_IBSS 0
|
|
#define MODE_STA_ESS 1
|
|
#define MODE_AP 2
|
|
#define MODE_AP_RPTR 3
|
|
#define MODE_ETHERNET_HOST (0<<8) /* rx payloads converted */
|
|
#define MODE_LLC_HOST (1<<8) /* rx payloads left as is */
|
|
#define MODE_AIRONET_EXTEND (1<<9) /* enable Aironet extenstions */
|
|
#define MODE_AP_INTERFACE (1<<10) /* enable ap interface extensions */
|
|
#define MODE_ANTENNA_ALIGN (1<<11) /* enable antenna alignment */
|
|
#define MODE_ETHER_LLC (1<<12) /* enable ethernet LLC */
|
|
#define MODE_LEAF_NODE (1<<13) /* enable leaf node bridge */
|
|
#define MODE_CF_POLLABLE (1<<14) /* enable CF pollable */
|
|
#define MODE_MIC (1<<15) /* enable MIC */
|
|
u16 rmode; /* receive mode */
|
|
#define RXMODE_BC_MC_ADDR 0
|
|
#define RXMODE_BC_ADDR 1 /* ignore multicasts */
|
|
#define RXMODE_ADDR 2 /* ignore multicast and broadcast */
|
|
#define RXMODE_RFMON 3 /* wireless monitor mode */
|
|
#define RXMODE_RFMON_ANYBSS 4
|
|
#define RXMODE_LANMON 5 /* lan style monitor -- data packets only */
|
|
#define RXMODE_DISABLE_802_3_HEADER (1<<8) /* disables 802.3 header on rx */
|
|
#define RXMODE_NORMALIZED_RSSI (1<<9) /* return normalized RSSI */
|
|
u16 fragThresh;
|
|
u16 rtsThres;
|
|
u8 macAddr[ETH_ALEN];
|
|
u8 rates[8];
|
|
u16 shortRetryLimit;
|
|
u16 longRetryLimit;
|
|
u16 txLifetime; /* in kusec */
|
|
u16 rxLifetime; /* in kusec */
|
|
u16 stationary;
|
|
u16 ordering;
|
|
u16 u16deviceType; /* for overriding device type */
|
|
u16 cfpRate;
|
|
u16 cfpDuration;
|
|
u16 _reserved1[3];
|
|
/*---------- Scanning/Associating ----------*/
|
|
u16 scanMode;
|
|
#define SCANMODE_ACTIVE 0
|
|
#define SCANMODE_PASSIVE 1
|
|
#define SCANMODE_AIROSCAN 2
|
|
u16 probeDelay; /* in kusec */
|
|
u16 probeEnergyTimeout; /* in kusec */
|
|
u16 probeResponseTimeout;
|
|
u16 beaconListenTimeout;
|
|
u16 joinNetTimeout;
|
|
u16 authTimeout;
|
|
u16 authType;
|
|
#define AUTH_OPEN 0x1
|
|
#define AUTH_ENCRYPT 0x101
|
|
#define AUTH_SHAREDKEY 0x102
|
|
#define AUTH_ALLOW_UNENCRYPTED 0x200
|
|
u16 associationTimeout;
|
|
u16 specifiedApTimeout;
|
|
u16 offlineScanInterval;
|
|
u16 offlineScanDuration;
|
|
u16 linkLossDelay;
|
|
u16 maxBeaconLostTime;
|
|
u16 refreshInterval;
|
|
#define DISABLE_REFRESH 0xFFFF
|
|
u16 _reserved1a[1];
|
|
/*---------- Power save operation ----------*/
|
|
u16 powerSaveMode;
|
|
#define POWERSAVE_CAM 0
|
|
#define POWERSAVE_PSP 1
|
|
#define POWERSAVE_PSPCAM 2
|
|
u16 sleepForDtims;
|
|
u16 listenInterval;
|
|
u16 fastListenInterval;
|
|
u16 listenDecay;
|
|
u16 fastListenDelay;
|
|
u16 _reserved2[2];
|
|
/*---------- Ap/Ibss config items ----------*/
|
|
u16 beaconPeriod;
|
|
u16 atimDuration;
|
|
u16 hopPeriod;
|
|
u16 channelSet;
|
|
u16 channel;
|
|
u16 dtimPeriod;
|
|
u16 bridgeDistance;
|
|
u16 radioID;
|
|
/*---------- Radio configuration ----------*/
|
|
u16 radioType;
|
|
#define RADIOTYPE_DEFAULT 0
|
|
#define RADIOTYPE_802_11 1
|
|
#define RADIOTYPE_LEGACY 2
|
|
u8 rxDiversity;
|
|
u8 txDiversity;
|
|
u16 txPower;
|
|
#define TXPOWER_DEFAULT 0
|
|
u16 rssiThreshold;
|
|
#define RSSI_DEFAULT 0
|
|
u16 modulation;
|
|
#define PREAMBLE_AUTO 0
|
|
#define PREAMBLE_LONG 1
|
|
#define PREAMBLE_SHORT 2
|
|
u16 preamble;
|
|
u16 homeProduct;
|
|
u16 radioSpecific;
|
|
/*---------- Aironet Extensions ----------*/
|
|
u8 nodeName[16];
|
|
u16 arlThreshold;
|
|
u16 arlDecay;
|
|
u16 arlDelay;
|
|
u16 _reserved4[1];
|
|
/*---------- Aironet Extensions ----------*/
|
|
u8 magicAction;
|
|
#define MAGIC_ACTION_STSCHG 1
|
|
#define MAGIC_ACTION_RESUME 2
|
|
#define MAGIC_IGNORE_MCAST (1<<8)
|
|
#define MAGIC_IGNORE_BCAST (1<<9)
|
|
#define MAGIC_SWITCH_TO_PSP (0<<10)
|
|
#define MAGIC_STAY_IN_CAM (1<<10)
|
|
u8 magicControl;
|
|
u16 autoWake;
|
|
} ConfigRid;
|
|
|
|
typedef struct {
|
|
u16 len;
|
|
u8 mac[ETH_ALEN];
|
|
u16 mode;
|
|
u16 errorCode;
|
|
u16 sigQuality;
|
|
u16 SSIDlen;
|
|
char SSID[32];
|
|
char apName[16];
|
|
u8 bssid[4][ETH_ALEN];
|
|
u16 beaconPeriod;
|
|
u16 dimPeriod;
|
|
u16 atimDuration;
|
|
u16 hopPeriod;
|
|
u16 channelSet;
|
|
u16 channel;
|
|
u16 hopsToBackbone;
|
|
u16 apTotalLoad;
|
|
u16 generatedLoad;
|
|
u16 accumulatedArl;
|
|
u16 signalQuality;
|
|
u16 currentXmitRate;
|
|
u16 apDevExtensions;
|
|
u16 normalizedSignalStrength;
|
|
u16 shortPreamble;
|
|
u8 apIP[4];
|
|
u8 noisePercent; /* Noise percent in last second */
|
|
u8 noisedBm; /* Noise dBm in last second */
|
|
u8 noiseAvePercent; /* Noise percent in last minute */
|
|
u8 noiseAvedBm; /* Noise dBm in last minute */
|
|
u8 noiseMaxPercent; /* Highest noise percent in last minute */
|
|
u8 noiseMaxdBm; /* Highest noise dbm in last minute */
|
|
u16 load;
|
|
u8 carrier[4];
|
|
u16 assocStatus;
|
|
#define STAT_NOPACKETS 0
|
|
#define STAT_NOCARRIERSET 10
|
|
#define STAT_GOTCARRIERSET 11
|
|
#define STAT_WRONGSSID 20
|
|
#define STAT_BADCHANNEL 25
|
|
#define STAT_BADBITRATES 30
|
|
#define STAT_BADPRIVACY 35
|
|
#define STAT_APFOUND 40
|
|
#define STAT_APREJECTED 50
|
|
#define STAT_AUTHENTICATING 60
|
|
#define STAT_DEAUTHENTICATED 61
|
|
#define STAT_AUTHTIMEOUT 62
|
|
#define STAT_ASSOCIATING 70
|
|
#define STAT_DEASSOCIATED 71
|
|
#define STAT_ASSOCTIMEOUT 72
|
|
#define STAT_NOTAIROAP 73
|
|
#define STAT_ASSOCIATED 80
|
|
#define STAT_LEAPING 90
|
|
#define STAT_LEAPFAILED 91
|
|
#define STAT_LEAPTIMEDOUT 92
|
|
#define STAT_LEAPCOMPLETE 93
|
|
} StatusRid;
|
|
|
|
typedef struct {
|
|
u16 len;
|
|
u16 spacer;
|
|
u32 vals[100];
|
|
} StatsRid;
|
|
|
|
|
|
typedef struct {
|
|
u16 len;
|
|
u8 ap[4][ETH_ALEN];
|
|
} APListRid;
|
|
|
|
typedef struct {
|
|
u16 len;
|
|
char oui[3];
|
|
char zero;
|
|
u16 prodNum;
|
|
char manName[32];
|
|
char prodName[16];
|
|
char prodVer[8];
|
|
char factoryAddr[ETH_ALEN];
|
|
char aironetAddr[ETH_ALEN];
|
|
u16 radioType;
|
|
u16 country;
|
|
char callid[ETH_ALEN];
|
|
char supportedRates[8];
|
|
char rxDiversity;
|
|
char txDiversity;
|
|
u16 txPowerLevels[8];
|
|
u16 hardVer;
|
|
u16 hardCap;
|
|
u16 tempRange;
|
|
u16 softVer;
|
|
u16 softSubVer;
|
|
u16 interfaceVer;
|
|
u16 softCap;
|
|
u16 bootBlockVer;
|
|
u16 requiredHard;
|
|
u16 extSoftCap;
|
|
} CapabilityRid;
|
|
|
|
|
|
/* Only present on firmware >= 5.30.17 */
|
|
typedef struct {
|
|
u16 unknown[4];
|
|
u8 fixed[12]; /* WLAN management frame */
|
|
u8 iep[624];
|
|
} BSSListRidExtra;
|
|
|
|
typedef struct {
|
|
u16 len;
|
|
u16 index; /* First is 0 and 0xffff means end of list */
|
|
#define RADIO_FH 1 /* Frequency hopping radio type */
|
|
#define RADIO_DS 2 /* Direct sequence radio type */
|
|
#define RADIO_TMA 4 /* Proprietary radio used in old cards (2500) */
|
|
u16 radioType;
|
|
u8 bssid[ETH_ALEN]; /* Mac address of the BSS */
|
|
u8 zero;
|
|
u8 ssidLen;
|
|
u8 ssid[32];
|
|
u16 dBm;
|
|
#define CAP_ESS (1<<0)
|
|
#define CAP_IBSS (1<<1)
|
|
#define CAP_PRIVACY (1<<4)
|
|
#define CAP_SHORTHDR (1<<5)
|
|
u16 cap;
|
|
u16 beaconInterval;
|
|
u8 rates[8]; /* Same as rates for config rid */
|
|
struct { /* For frequency hopping only */
|
|
u16 dwell;
|
|
u8 hopSet;
|
|
u8 hopPattern;
|
|
u8 hopIndex;
|
|
u8 fill;
|
|
} fh;
|
|
u16 dsChannel;
|
|
u16 atimWindow;
|
|
|
|
/* Only present on firmware >= 5.30.17 */
|
|
BSSListRidExtra extra;
|
|
} BSSListRid;
|
|
|
|
typedef struct {
|
|
BSSListRid bss;
|
|
struct list_head list;
|
|
} BSSListElement;
|
|
|
|
typedef struct {
|
|
u8 rssipct;
|
|
u8 rssidBm;
|
|
} tdsRssiEntry;
|
|
|
|
typedef struct {
|
|
u16 len;
|
|
tdsRssiEntry x[256];
|
|
} tdsRssiRid;
|
|
|
|
typedef struct {
|
|
u16 len;
|
|
u16 state;
|
|
u16 multicastValid;
|
|
u8 multicast[16];
|
|
u16 unicastValid;
|
|
u8 unicast[16];
|
|
} MICRid;
|
|
|
|
typedef struct {
|
|
u16 typelen;
|
|
|
|
union {
|
|
u8 snap[8];
|
|
struct {
|
|
u8 dsap;
|
|
u8 ssap;
|
|
u8 control;
|
|
u8 orgcode[3];
|
|
u8 fieldtype[2];
|
|
} llc;
|
|
} u;
|
|
u32 mic;
|
|
u32 seq;
|
|
} MICBuffer;
|
|
|
|
typedef struct {
|
|
u8 da[ETH_ALEN];
|
|
u8 sa[ETH_ALEN];
|
|
} etherHead;
|
|
|
|
#pragma pack()
|
|
|
|
#define TXCTL_TXOK (1<<1) /* report if tx is ok */
|
|
#define TXCTL_TXEX (1<<2) /* report if tx fails */
|
|
#define TXCTL_802_3 (0<<3) /* 802.3 packet */
|
|
#define TXCTL_802_11 (1<<3) /* 802.11 mac packet */
|
|
#define TXCTL_ETHERNET (0<<4) /* payload has ethertype */
|
|
#define TXCTL_LLC (1<<4) /* payload is llc */
|
|
#define TXCTL_RELEASE (0<<5) /* release after completion */
|
|
#define TXCTL_NORELEASE (1<<5) /* on completion returns to host */
|
|
|
|
#define BUSY_FID 0x10000
|
|
|
|
#ifdef CISCO_EXT
|
|
#define AIROMAGIC 0xa55a
|
|
/* Warning : SIOCDEVPRIVATE may disapear during 2.5.X - Jean II */
|
|
#ifdef SIOCIWFIRSTPRIV
|
|
#ifdef SIOCDEVPRIVATE
|
|
#define AIROOLDIOCTL SIOCDEVPRIVATE
|
|
#define AIROOLDIDIFC AIROOLDIOCTL + 1
|
|
#endif /* SIOCDEVPRIVATE */
|
|
#else /* SIOCIWFIRSTPRIV */
|
|
#define SIOCIWFIRSTPRIV SIOCDEVPRIVATE
|
|
#endif /* SIOCIWFIRSTPRIV */
|
|
/* This may be wrong. When using the new SIOCIWFIRSTPRIV range, we probably
|
|
* should use only "GET" ioctls (last bit set to 1). "SET" ioctls are root
|
|
* only and don't return the modified struct ifreq to the application which
|
|
* is usually a problem. - Jean II */
|
|
#define AIROIOCTL SIOCIWFIRSTPRIV
|
|
#define AIROIDIFC AIROIOCTL + 1
|
|
|
|
/* Ioctl constants to be used in airo_ioctl.command */
|
|
|
|
#define AIROGCAP 0 // Capability rid
|
|
#define AIROGCFG 1 // USED A LOT
|
|
#define AIROGSLIST 2 // System ID list
|
|
#define AIROGVLIST 3 // List of specified AP's
|
|
#define AIROGDRVNAM 4 // NOTUSED
|
|
#define AIROGEHTENC 5 // NOTUSED
|
|
#define AIROGWEPKTMP 6
|
|
#define AIROGWEPKNV 7
|
|
#define AIROGSTAT 8
|
|
#define AIROGSTATSC32 9
|
|
#define AIROGSTATSD32 10
|
|
#define AIROGMICRID 11
|
|
#define AIROGMICSTATS 12
|
|
#define AIROGFLAGS 13
|
|
#define AIROGID 14
|
|
#define AIRORRID 15
|
|
#define AIRORSWVERSION 17
|
|
|
|
/* Leave gap of 40 commands after AIROGSTATSD32 for future */
|
|
|
|
#define AIROPCAP AIROGSTATSD32 + 40
|
|
#define AIROPVLIST AIROPCAP + 1
|
|
#define AIROPSLIST AIROPVLIST + 1
|
|
#define AIROPCFG AIROPSLIST + 1
|
|
#define AIROPSIDS AIROPCFG + 1
|
|
#define AIROPAPLIST AIROPSIDS + 1
|
|
#define AIROPMACON AIROPAPLIST + 1 /* Enable mac */
|
|
#define AIROPMACOFF AIROPMACON + 1 /* Disable mac */
|
|
#define AIROPSTCLR AIROPMACOFF + 1
|
|
#define AIROPWEPKEY AIROPSTCLR + 1
|
|
#define AIROPWEPKEYNV AIROPWEPKEY + 1
|
|
#define AIROPLEAPPWD AIROPWEPKEYNV + 1
|
|
#define AIROPLEAPUSR AIROPLEAPPWD + 1
|
|
|
|
/* Flash codes */
|
|
|
|
#define AIROFLSHRST AIROPWEPKEYNV + 40
|
|
#define AIROFLSHGCHR AIROFLSHRST + 1
|
|
#define AIROFLSHSTFL AIROFLSHGCHR + 1
|
|
#define AIROFLSHPCHR AIROFLSHSTFL + 1
|
|
#define AIROFLPUTBUF AIROFLSHPCHR + 1
|
|
#define AIRORESTART AIROFLPUTBUF + 1
|
|
|
|
#define FLASHSIZE 32768
|
|
#define AUXMEMSIZE (256 * 1024)
|
|
|
|
typedef struct aironet_ioctl {
|
|
unsigned short command; // What to do
|
|
unsigned short len; // Len of data
|
|
unsigned short ridnum; // rid number
|
|
unsigned char __user *data; // d-data
|
|
} aironet_ioctl;
|
|
|
|
static char swversion[] = "2.1";
|
|
#endif /* CISCO_EXT */
|
|
|
|
#define NUM_MODULES 2
|
|
#define MIC_MSGLEN_MAX 2400
|
|
#define EMMH32_MSGLEN_MAX MIC_MSGLEN_MAX
|
|
#define AIRO_DEF_MTU 2312
|
|
|
|
typedef struct {
|
|
u32 size; // size
|
|
u8 enabled; // MIC enabled or not
|
|
u32 rxSuccess; // successful packets received
|
|
u32 rxIncorrectMIC; // pkts dropped due to incorrect MIC comparison
|
|
u32 rxNotMICed; // pkts dropped due to not being MIC'd
|
|
u32 rxMICPlummed; // pkts dropped due to not having a MIC plummed
|
|
u32 rxWrongSequence; // pkts dropped due to sequence number violation
|
|
u32 reserve[32];
|
|
} mic_statistics;
|
|
|
|
typedef struct {
|
|
u32 coeff[((EMMH32_MSGLEN_MAX)+3)>>2];
|
|
u64 accum; // accumulated mic, reduced to u32 in final()
|
|
int position; // current position (byte offset) in message
|
|
union {
|
|
u8 d8[4];
|
|
u32 d32;
|
|
} part; // saves partial message word across update() calls
|
|
} emmh32_context;
|
|
|
|
typedef struct {
|
|
emmh32_context seed; // Context - the seed
|
|
u32 rx; // Received sequence number
|
|
u32 tx; // Tx sequence number
|
|
u32 window; // Start of window
|
|
u8 valid; // Flag to say if context is valid or not
|
|
u8 key[16];
|
|
} miccntx;
|
|
|
|
typedef struct {
|
|
miccntx mCtx; // Multicast context
|
|
miccntx uCtx; // Unicast context
|
|
} mic_module;
|
|
|
|
typedef struct {
|
|
unsigned int rid: 16;
|
|
unsigned int len: 15;
|
|
unsigned int valid: 1;
|
|
dma_addr_t host_addr;
|
|
} Rid;
|
|
|
|
typedef struct {
|
|
unsigned int offset: 15;
|
|
unsigned int eoc: 1;
|
|
unsigned int len: 15;
|
|
unsigned int valid: 1;
|
|
dma_addr_t host_addr;
|
|
} TxFid;
|
|
|
|
typedef struct {
|
|
unsigned int ctl: 15;
|
|
unsigned int rdy: 1;
|
|
unsigned int len: 15;
|
|
unsigned int valid: 1;
|
|
dma_addr_t host_addr;
|
|
} RxFid;
|
|
|
|
/*
|
|
* Host receive descriptor
|
|
*/
|
|
typedef struct {
|
|
unsigned char __iomem *card_ram_off; /* offset into card memory of the
|
|
desc */
|
|
RxFid rx_desc; /* card receive descriptor */
|
|
char *virtual_host_addr; /* virtual address of host receive
|
|
buffer */
|
|
int pending;
|
|
} HostRxDesc;
|
|
|
|
/*
|
|
* Host transmit descriptor
|
|
*/
|
|
typedef struct {
|
|
unsigned char __iomem *card_ram_off; /* offset into card memory of the
|
|
desc */
|
|
TxFid tx_desc; /* card transmit descriptor */
|
|
char *virtual_host_addr; /* virtual address of host receive
|
|
buffer */
|
|
int pending;
|
|
} HostTxDesc;
|
|
|
|
/*
|
|
* Host RID descriptor
|
|
*/
|
|
typedef struct {
|
|
unsigned char __iomem *card_ram_off; /* offset into card memory of the
|
|
descriptor */
|
|
Rid rid_desc; /* card RID descriptor */
|
|
char *virtual_host_addr; /* virtual address of host receive
|
|
buffer */
|
|
} HostRidDesc;
|
|
|
|
typedef struct {
|
|
u16 sw0;
|
|
u16 sw1;
|
|
u16 status;
|
|
u16 len;
|
|
#define HOST_SET (1 << 0)
|
|
#define HOST_INT_TX (1 << 1) /* Interrupt on successful TX */
|
|
#define HOST_INT_TXERR (1 << 2) /* Interrupt on unseccessful TX */
|
|
#define HOST_LCC_PAYLOAD (1 << 4) /* LLC payload, 0 = Ethertype */
|
|
#define HOST_DONT_RLSE (1 << 5) /* Don't release buffer when done */
|
|
#define HOST_DONT_RETRY (1 << 6) /* Don't retry trasmit */
|
|
#define HOST_CLR_AID (1 << 7) /* clear AID failure */
|
|
#define HOST_RTS (1 << 9) /* Force RTS use */
|
|
#define HOST_SHORT (1 << 10) /* Do short preamble */
|
|
u16 ctl;
|
|
u16 aid;
|
|
u16 retries;
|
|
u16 fill;
|
|
} TxCtlHdr;
|
|
|
|
typedef struct {
|
|
u16 ctl;
|
|
u16 duration;
|
|
char addr1[6];
|
|
char addr2[6];
|
|
char addr3[6];
|
|
u16 seq;
|
|
char addr4[6];
|
|
} WifiHdr;
|
|
|
|
|
|
typedef struct {
|
|
TxCtlHdr ctlhdr;
|
|
u16 fill1;
|
|
u16 fill2;
|
|
WifiHdr wifihdr;
|
|
u16 gaplen;
|
|
u16 status;
|
|
} WifiCtlHdr;
|
|
|
|
static WifiCtlHdr wifictlhdr8023 = {
|
|
.ctlhdr = {
|
|
.ctl = HOST_DONT_RLSE,
|
|
}
|
|
};
|
|
|
|
// Frequency list (map channels to frequencies)
|
|
static const long frequency_list[] = { 2412, 2417, 2422, 2427, 2432, 2437, 2442,
|
|
2447, 2452, 2457, 2462, 2467, 2472, 2484 };
|
|
|
|
// A few details needed for WEP (Wireless Equivalent Privacy)
|
|
#define MAX_KEY_SIZE 13 // 128 (?) bits
|
|
#define MIN_KEY_SIZE 5 // 40 bits RC4 - WEP
|
|
typedef struct wep_key_t {
|
|
u16 len;
|
|
u8 key[16]; /* 40-bit and 104-bit keys */
|
|
} wep_key_t;
|
|
|
|
/* Backward compatibility */
|
|
#ifndef IW_ENCODE_NOKEY
|
|
#define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not present */
|
|
#define IW_ENCODE_MODE (IW_ENCODE_DISABLED | IW_ENCODE_RESTRICTED | IW_ENCODE_OPEN)
|
|
#endif /* IW_ENCODE_NOKEY */
|
|
|
|
/* List of Wireless Handlers (new API) */
|
|
static const struct iw_handler_def airo_handler_def;
|
|
|
|
static const char version[] = "airo.c 0.6 (Ben Reed & Javier Achirica)";
|
|
|
|
struct airo_info;
|
|
|
|
static int get_dec_u16( char *buffer, int *start, int limit );
|
|
static void OUT4500( struct airo_info *, u16 register, u16 value );
|
|
static unsigned short IN4500( struct airo_info *, u16 register );
|
|
static u16 setup_card(struct airo_info*, u8 *mac, int lock);
|
|
static int enable_MAC( struct airo_info *ai, Resp *rsp, int lock );
|
|
static void disable_MAC(struct airo_info *ai, int lock);
|
|
static void enable_interrupts(struct airo_info*);
|
|
static void disable_interrupts(struct airo_info*);
|
|
static u16 issuecommand(struct airo_info*, Cmd *pCmd, Resp *pRsp);
|
|
static int bap_setup(struct airo_info*, u16 rid, u16 offset, int whichbap);
|
|
static int aux_bap_read(struct airo_info*, u16 *pu16Dst, int bytelen,
|
|
int whichbap);
|
|
static int fast_bap_read(struct airo_info*, u16 *pu16Dst, int bytelen,
|
|
int whichbap);
|
|
static int bap_write(struct airo_info*, const u16 *pu16Src, int bytelen,
|
|
int whichbap);
|
|
static int PC4500_accessrid(struct airo_info*, u16 rid, u16 accmd);
|
|
static int PC4500_readrid(struct airo_info*, u16 rid, void *pBuf, int len, int lock);
|
|
static int PC4500_writerid(struct airo_info*, u16 rid, const void
|
|
*pBuf, int len, int lock);
|
|
static int do_writerid( struct airo_info*, u16 rid, const void *rid_data,
|
|
int len, int dummy );
|
|
static u16 transmit_allocate(struct airo_info*, int lenPayload, int raw);
|
|
static int transmit_802_3_packet(struct airo_info*, int len, char *pPacket);
|
|
static int transmit_802_11_packet(struct airo_info*, int len, char *pPacket);
|
|
|
|
static int mpi_send_packet (struct net_device *dev);
|
|
static void mpi_unmap_card(struct pci_dev *pci);
|
|
static void mpi_receive_802_3(struct airo_info *ai);
|
|
static void mpi_receive_802_11(struct airo_info *ai);
|
|
static int waitbusy (struct airo_info *ai);
|
|
|
|
static irqreturn_t airo_interrupt( int irq, void* dev_id);
|
|
static int airo_thread(void *data);
|
|
static void timer_func( struct net_device *dev );
|
|
static int airo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
|
|
static struct iw_statistics *airo_get_wireless_stats (struct net_device *dev);
|
|
static void airo_read_wireless_stats (struct airo_info *local);
|
|
#ifdef CISCO_EXT
|
|
static int readrids(struct net_device *dev, aironet_ioctl *comp);
|
|
static int writerids(struct net_device *dev, aironet_ioctl *comp);
|
|
static int flashcard(struct net_device *dev, aironet_ioctl *comp);
|
|
#endif /* CISCO_EXT */
|
|
static void micinit(struct airo_info *ai);
|
|
static int micsetup(struct airo_info *ai);
|
|
static int encapsulate(struct airo_info *ai, etherHead *pPacket, MICBuffer *buffer, int len);
|
|
static int decapsulate(struct airo_info *ai, MICBuffer *mic, etherHead *pPacket, u16 payLen);
|
|
|
|
static u8 airo_rssi_to_dbm (tdsRssiEntry *rssi_rid, u8 rssi);
|
|
static u8 airo_dbm_to_pct (tdsRssiEntry *rssi_rid, u8 dbm);
|
|
|
|
static void airo_networks_free(struct airo_info *ai);
|
|
|
|
struct airo_info {
|
|
struct net_device_stats stats;
|
|
struct net_device *dev;
|
|
struct list_head dev_list;
|
|
/* Note, we can have MAX_FIDS outstanding. FIDs are 16-bits, so we
|
|
use the high bit to mark whether it is in use. */
|
|
#define MAX_FIDS 6
|
|
#define MPI_MAX_FIDS 1
|
|
int fids[MAX_FIDS];
|
|
ConfigRid config;
|
|
char keyindex; // Used with auto wep
|
|
char defindex; // Used with auto wep
|
|
struct proc_dir_entry *proc_entry;
|
|
spinlock_t aux_lock;
|
|
#define FLAG_RADIO_OFF 0 /* User disabling of MAC */
|
|
#define FLAG_RADIO_DOWN 1 /* ifup/ifdown disabling of MAC */
|
|
#define FLAG_RADIO_MASK 0x03
|
|
#define FLAG_ENABLED 2
|
|
#define FLAG_ADHOC 3 /* Needed by MIC */
|
|
#define FLAG_MIC_CAPABLE 4
|
|
#define FLAG_UPDATE_MULTI 5
|
|
#define FLAG_UPDATE_UNI 6
|
|
#define FLAG_802_11 7
|
|
#define FLAG_PROMISC 8 /* IFF_PROMISC 0x100 - include/linux/if.h */
|
|
#define FLAG_PENDING_XMIT 9
|
|
#define FLAG_PENDING_XMIT11 10
|
|
#define FLAG_MPI 11
|
|
#define FLAG_REGISTERED 12
|
|
#define FLAG_COMMIT 13
|
|
#define FLAG_RESET 14
|
|
#define FLAG_FLASHING 15
|
|
#define FLAG_WPA_CAPABLE 16
|
|
unsigned long flags;
|
|
#define JOB_DIE 0
|
|
#define JOB_XMIT 1
|
|
#define JOB_XMIT11 2
|
|
#define JOB_STATS 3
|
|
#define JOB_PROMISC 4
|
|
#define JOB_MIC 5
|
|
#define JOB_EVENT 6
|
|
#define JOB_AUTOWEP 7
|
|
#define JOB_WSTATS 8
|
|
#define JOB_SCAN_RESULTS 9
|
|
unsigned long jobs;
|
|
int (*bap_read)(struct airo_info*, u16 *pu16Dst, int bytelen,
|
|
int whichbap);
|
|
unsigned short *flash;
|
|
tdsRssiEntry *rssi;
|
|
struct task_struct *list_bss_task;
|
|
struct task_struct *airo_thread_task;
|
|
struct semaphore sem;
|
|
wait_queue_head_t thr_wait;
|
|
unsigned long expires;
|
|
struct {
|
|
struct sk_buff *skb;
|
|
int fid;
|
|
} xmit, xmit11;
|
|
struct net_device *wifidev;
|
|
struct iw_statistics wstats; // wireless stats
|
|
unsigned long scan_timeout; /* Time scan should be read */
|
|
struct iw_spy_data spy_data;
|
|
struct iw_public_data wireless_data;
|
|
/* MIC stuff */
|
|
struct crypto_cipher *tfm;
|
|
mic_module mod[2];
|
|
mic_statistics micstats;
|
|
HostRxDesc rxfids[MPI_MAX_FIDS]; // rx/tx/config MPI350 descriptors
|
|
HostTxDesc txfids[MPI_MAX_FIDS];
|
|
HostRidDesc config_desc;
|
|
unsigned long ridbus; // phys addr of config_desc
|
|
struct sk_buff_head txq;// tx queue used by mpi350 code
|
|
struct pci_dev *pci;
|
|
unsigned char __iomem *pcimem;
|
|
unsigned char __iomem *pciaux;
|
|
unsigned char *shared;
|
|
dma_addr_t shared_dma;
|
|
pm_message_t power;
|
|
SsidRid *SSID;
|
|
APListRid *APList;
|
|
#define PCI_SHARED_LEN 2*MPI_MAX_FIDS*PKTSIZE+RIDSIZE
|
|
char proc_name[IFNAMSIZ];
|
|
|
|
/* WPA-related stuff */
|
|
unsigned int bssListFirst;
|
|
unsigned int bssListNext;
|
|
unsigned int bssListRidLen;
|
|
|
|
struct list_head network_list;
|
|
struct list_head network_free_list;
|
|
BSSListElement *networks;
|
|
};
|
|
|
|
static inline int bap_read(struct airo_info *ai, u16 *pu16Dst, int bytelen,
|
|
int whichbap) {
|
|
return ai->bap_read(ai, pu16Dst, bytelen, whichbap);
|
|
}
|
|
|
|
static int setup_proc_entry( struct net_device *dev,
|
|
struct airo_info *apriv );
|
|
static int takedown_proc_entry( struct net_device *dev,
|
|
struct airo_info *apriv );
|
|
|
|
static int cmdreset(struct airo_info *ai);
|
|
static int setflashmode (struct airo_info *ai);
|
|
static int flashgchar(struct airo_info *ai,int matchbyte,int dwelltime);
|
|
static int flashputbuf(struct airo_info *ai);
|
|
static int flashrestart(struct airo_info *ai,struct net_device *dev);
|
|
|
|
#define airo_print(type, name, fmt, args...) \
|
|
{ printk(type "airo(%s): " fmt "\n", name, ##args); }
|
|
|
|
#define airo_print_info(name, fmt, args...) \
|
|
airo_print(KERN_INFO, name, fmt, ##args)
|
|
|
|
#define airo_print_dbg(name, fmt, args...) \
|
|
airo_print(KERN_DEBUG, name, fmt, ##args)
|
|
|
|
#define airo_print_warn(name, fmt, args...) \
|
|
airo_print(KERN_WARNING, name, fmt, ##args)
|
|
|
|
#define airo_print_err(name, fmt, args...) \
|
|
airo_print(KERN_ERR, name, fmt, ##args)
|
|
|
|
|
|
/***********************************************************************
|
|
* MIC ROUTINES *
|
|
***********************************************************************
|
|
*/
|
|
|
|
static int RxSeqValid (struct airo_info *ai,miccntx *context,int mcast,u32 micSeq);
|
|
static void MoveWindow(miccntx *context, u32 micSeq);
|
|
static void emmh32_setseed(emmh32_context *context, u8 *pkey, int keylen,
|
|
struct crypto_cipher *tfm);
|
|
static void emmh32_init(emmh32_context *context);
|
|
static void emmh32_update(emmh32_context *context, u8 *pOctets, int len);
|
|
static void emmh32_final(emmh32_context *context, u8 digest[4]);
|
|
static int flashpchar(struct airo_info *ai,int byte,int dwelltime);
|
|
|
|
/* micinit - Initialize mic seed */
|
|
|
|
static void micinit(struct airo_info *ai)
|
|
{
|
|
MICRid mic_rid;
|
|
|
|
clear_bit(JOB_MIC, &ai->jobs);
|
|
PC4500_readrid(ai, RID_MIC, &mic_rid, sizeof(mic_rid), 0);
|
|
up(&ai->sem);
|
|
|
|
ai->micstats.enabled = (mic_rid.state & 0x00FF) ? 1 : 0;
|
|
|
|
if (ai->micstats.enabled) {
|
|
/* Key must be valid and different */
|
|
if (mic_rid.multicastValid && (!ai->mod[0].mCtx.valid ||
|
|
(memcmp (ai->mod[0].mCtx.key, mic_rid.multicast,
|
|
sizeof(ai->mod[0].mCtx.key)) != 0))) {
|
|
/* Age current mic Context */
|
|
memcpy(&ai->mod[1].mCtx,&ai->mod[0].mCtx,sizeof(miccntx));
|
|
/* Initialize new context */
|
|
memcpy(&ai->mod[0].mCtx.key,mic_rid.multicast,sizeof(mic_rid.multicast));
|
|
ai->mod[0].mCtx.window = 33; //Window always points to the middle
|
|
ai->mod[0].mCtx.rx = 0; //Rx Sequence numbers
|
|
ai->mod[0].mCtx.tx = 0; //Tx sequence numbers
|
|
ai->mod[0].mCtx.valid = 1; //Key is now valid
|
|
|
|
/* Give key to mic seed */
|
|
emmh32_setseed(&ai->mod[0].mCtx.seed,mic_rid.multicast,sizeof(mic_rid.multicast), ai->tfm);
|
|
}
|
|
|
|
/* Key must be valid and different */
|
|
if (mic_rid.unicastValid && (!ai->mod[0].uCtx.valid ||
|
|
(memcmp(ai->mod[0].uCtx.key, mic_rid.unicast,
|
|
sizeof(ai->mod[0].uCtx.key)) != 0))) {
|
|
/* Age current mic Context */
|
|
memcpy(&ai->mod[1].uCtx,&ai->mod[0].uCtx,sizeof(miccntx));
|
|
/* Initialize new context */
|
|
memcpy(&ai->mod[0].uCtx.key,mic_rid.unicast,sizeof(mic_rid.unicast));
|
|
|
|
ai->mod[0].uCtx.window = 33; //Window always points to the middle
|
|
ai->mod[0].uCtx.rx = 0; //Rx Sequence numbers
|
|
ai->mod[0].uCtx.tx = 0; //Tx sequence numbers
|
|
ai->mod[0].uCtx.valid = 1; //Key is now valid
|
|
|
|
//Give key to mic seed
|
|
emmh32_setseed(&ai->mod[0].uCtx.seed, mic_rid.unicast, sizeof(mic_rid.unicast), ai->tfm);
|
|
}
|
|
} else {
|
|
/* So next time we have a valid key and mic is enabled, we will update
|
|
* the sequence number if the key is the same as before.
|
|
*/
|
|
ai->mod[0].uCtx.valid = 0;
|
|
ai->mod[0].mCtx.valid = 0;
|
|
}
|
|
}
|
|
|
|
/* micsetup - Get ready for business */
|
|
|
|
static int micsetup(struct airo_info *ai) {
|
|
int i;
|
|
|
|
if (ai->tfm == NULL)
|
|
ai->tfm = crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC);
|
|
|
|
if (IS_ERR(ai->tfm)) {
|
|
airo_print_err(ai->dev->name, "failed to load transform for AES");
|
|
ai->tfm = NULL;
|
|
return ERROR;
|
|
}
|
|
|
|
for (i=0; i < NUM_MODULES; i++) {
|
|
memset(&ai->mod[i].mCtx,0,sizeof(miccntx));
|
|
memset(&ai->mod[i].uCtx,0,sizeof(miccntx));
|
|
}
|
|
return SUCCESS;
|
|
}
|
|
|
|
static char micsnap[] = {0xAA,0xAA,0x03,0x00,0x40,0x96,0x00,0x02};
|
|
|
|
/*===========================================================================
|
|
* Description: Mic a packet
|
|
*
|
|
* Inputs: etherHead * pointer to an 802.3 frame
|
|
*
|
|
* Returns: BOOLEAN if successful, otherwise false.
|
|
* PacketTxLen will be updated with the mic'd packets size.
|
|
*
|
|
* Caveats: It is assumed that the frame buffer will already
|
|
* be big enough to hold the largets mic message possible.
|
|
* (No memory allocation is done here).
|
|
*
|
|
* Author: sbraneky (10/15/01)
|
|
* Merciless hacks by rwilcher (1/14/02)
|
|
*/
|
|
|
|
static int encapsulate(struct airo_info *ai ,etherHead *frame, MICBuffer *mic, int payLen)
|
|
{
|
|
miccntx *context;
|
|
|
|
// Determine correct context
|
|
// If not adhoc, always use unicast key
|
|
|
|
if (test_bit(FLAG_ADHOC, &ai->flags) && (frame->da[0] & 0x1))
|
|
context = &ai->mod[0].mCtx;
|
|
else
|
|
context = &ai->mod[0].uCtx;
|
|
|
|
if (!context->valid)
|
|
return ERROR;
|
|
|
|
mic->typelen = htons(payLen + 16); //Length of Mic'd packet
|
|
|
|
memcpy(&mic->u.snap, micsnap, sizeof(micsnap)); // Add Snap
|
|
|
|
// Add Tx sequence
|
|
mic->seq = htonl(context->tx);
|
|
context->tx += 2;
|
|
|
|
emmh32_init(&context->seed); // Mic the packet
|
|
emmh32_update(&context->seed,frame->da,ETH_ALEN * 2); // DA,SA
|
|
emmh32_update(&context->seed,(u8*)&mic->typelen,10); // Type/Length and Snap
|
|
emmh32_update(&context->seed,(u8*)&mic->seq,sizeof(mic->seq)); //SEQ
|
|
emmh32_update(&context->seed,frame->da + ETH_ALEN * 2,payLen); //payload
|
|
emmh32_final(&context->seed, (u8*)&mic->mic);
|
|
|
|
/* New Type/length ?????????? */
|
|
mic->typelen = 0; //Let NIC know it could be an oversized packet
|
|
return SUCCESS;
|
|
}
|
|
|
|
typedef enum {
|
|
NONE,
|
|
NOMIC,
|
|
NOMICPLUMMED,
|
|
SEQUENCE,
|
|
INCORRECTMIC,
|
|
} mic_error;
|
|
|
|
/*===========================================================================
|
|
* Description: Decapsulates a MIC'd packet and returns the 802.3 packet
|
|
* (removes the MIC stuff) if packet is a valid packet.
|
|
*
|
|
* Inputs: etherHead pointer to the 802.3 packet
|
|
*
|
|
* Returns: BOOLEAN - TRUE if packet should be dropped otherwise FALSE
|
|
*
|
|
* Author: sbraneky (10/15/01)
|
|
* Merciless hacks by rwilcher (1/14/02)
|
|
*---------------------------------------------------------------------------
|
|
*/
|
|
|
|
static int decapsulate(struct airo_info *ai, MICBuffer *mic, etherHead *eth, u16 payLen)
|
|
{
|
|
int i;
|
|
u32 micSEQ;
|
|
miccntx *context;
|
|
u8 digest[4];
|
|
mic_error micError = NONE;
|
|
|
|
// Check if the packet is a Mic'd packet
|
|
|
|
if (!ai->micstats.enabled) {
|
|
//No Mic set or Mic OFF but we received a MIC'd packet.
|
|
if (memcmp ((u8*)eth + 14, micsnap, sizeof(micsnap)) == 0) {
|
|
ai->micstats.rxMICPlummed++;
|
|
return ERROR;
|
|
}
|
|
return SUCCESS;
|
|
}
|
|
|
|
if (ntohs(mic->typelen) == 0x888E)
|
|
return SUCCESS;
|
|
|
|
if (memcmp (mic->u.snap, micsnap, sizeof(micsnap)) != 0) {
|
|
// Mic enabled but packet isn't Mic'd
|
|
ai->micstats.rxMICPlummed++;
|
|
return ERROR;
|
|
}
|
|
|
|
micSEQ = ntohl(mic->seq); //store SEQ as CPU order
|
|
|
|
//At this point we a have a mic'd packet and mic is enabled
|
|
//Now do the mic error checking.
|
|
|
|
//Receive seq must be odd
|
|
if ( (micSEQ & 1) == 0 ) {
|
|
ai->micstats.rxWrongSequence++;
|
|
return ERROR;
|
|
}
|
|
|
|
for (i = 0; i < NUM_MODULES; i++) {
|
|
int mcast = eth->da[0] & 1;
|
|
//Determine proper context
|
|
context = mcast ? &ai->mod[i].mCtx : &ai->mod[i].uCtx;
|
|
|
|
//Make sure context is valid
|
|
if (!context->valid) {
|
|
if (i == 0)
|
|
micError = NOMICPLUMMED;
|
|
continue;
|
|
}
|
|
//DeMic it
|
|
|
|
if (!mic->typelen)
|
|
mic->typelen = htons(payLen + sizeof(MICBuffer) - 2);
|
|
|
|
emmh32_init(&context->seed);
|
|
emmh32_update(&context->seed, eth->da, ETH_ALEN*2);
|
|
emmh32_update(&context->seed, (u8 *)&mic->typelen, sizeof(mic->typelen)+sizeof(mic->u.snap));
|
|
emmh32_update(&context->seed, (u8 *)&mic->seq,sizeof(mic->seq));
|
|
emmh32_update(&context->seed, eth->da + ETH_ALEN*2,payLen);
|
|
//Calculate MIC
|
|
emmh32_final(&context->seed, digest);
|
|
|
|
if (memcmp(digest, &mic->mic, 4)) { //Make sure the mics match
|
|
//Invalid Mic
|
|
if (i == 0)
|
|
micError = INCORRECTMIC;
|
|
continue;
|
|
}
|
|
|
|
//Check Sequence number if mics pass
|
|
if (RxSeqValid(ai, context, mcast, micSEQ) == SUCCESS) {
|
|
ai->micstats.rxSuccess++;
|
|
return SUCCESS;
|
|
}
|
|
if (i == 0)
|
|
micError = SEQUENCE;
|
|
}
|
|
|
|
// Update statistics
|
|
switch (micError) {
|
|
case NOMICPLUMMED: ai->micstats.rxMICPlummed++; break;
|
|
case SEQUENCE: ai->micstats.rxWrongSequence++; break;
|
|
case INCORRECTMIC: ai->micstats.rxIncorrectMIC++; break;
|
|
case NONE: break;
|
|
case NOMIC: break;
|
|
}
|
|
return ERROR;
|
|
}
|
|
|
|
/*===========================================================================
|
|
* Description: Checks the Rx Seq number to make sure it is valid
|
|
* and hasn't already been received
|
|
*
|
|
* Inputs: miccntx - mic context to check seq against
|
|
* micSeq - the Mic seq number
|
|
*
|
|
* Returns: TRUE if valid otherwise FALSE.
|
|
*
|
|
* Author: sbraneky (10/15/01)
|
|
* Merciless hacks by rwilcher (1/14/02)
|
|
*---------------------------------------------------------------------------
|
|
*/
|
|
|
|
static int RxSeqValid (struct airo_info *ai,miccntx *context,int mcast,u32 micSeq)
|
|
{
|
|
u32 seq,index;
|
|
|
|
//Allow for the ap being rebooted - if it is then use the next
|
|
//sequence number of the current sequence number - might go backwards
|
|
|
|
if (mcast) {
|
|
if (test_bit(FLAG_UPDATE_MULTI, &ai->flags)) {
|
|
clear_bit (FLAG_UPDATE_MULTI, &ai->flags);
|
|
context->window = (micSeq > 33) ? micSeq : 33;
|
|
context->rx = 0; // Reset rx
|
|
}
|
|
} else if (test_bit(FLAG_UPDATE_UNI, &ai->flags)) {
|
|
clear_bit (FLAG_UPDATE_UNI, &ai->flags);
|
|
context->window = (micSeq > 33) ? micSeq : 33; // Move window
|
|
context->rx = 0; // Reset rx
|
|
}
|
|
|
|
//Make sequence number relative to START of window
|
|
seq = micSeq - (context->window - 33);
|
|
|
|
//Too old of a SEQ number to check.
|
|
if ((s32)seq < 0)
|
|
return ERROR;
|
|
|
|
if ( seq > 64 ) {
|
|
//Window is infinite forward
|
|
MoveWindow(context,micSeq);
|
|
return SUCCESS;
|
|
}
|
|
|
|
// We are in the window. Now check the context rx bit to see if it was already sent
|
|
seq >>= 1; //divide by 2 because we only have odd numbers
|
|
index = 1 << seq; //Get an index number
|
|
|
|
if (!(context->rx & index)) {
|
|
//micSEQ falls inside the window.
|
|
//Add seqence number to the list of received numbers.
|
|
context->rx |= index;
|
|
|
|
MoveWindow(context,micSeq);
|
|
|
|
return SUCCESS;
|
|
}
|
|
return ERROR;
|
|
}
|
|
|
|
static void MoveWindow(miccntx *context, u32 micSeq)
|
|
{
|
|
u32 shift;
|
|
|
|
//Move window if seq greater than the middle of the window
|
|
if (micSeq > context->window) {
|
|
shift = (micSeq - context->window) >> 1;
|
|
|
|
//Shift out old
|
|
if (shift < 32)
|
|
context->rx >>= shift;
|
|
else
|
|
context->rx = 0;
|
|
|
|
context->window = micSeq; //Move window
|
|
}
|
|
}
|
|
|
|
/*==============================================*/
|
|
/*========== EMMH ROUTINES ====================*/
|
|
/*==============================================*/
|
|
|
|
/* mic accumulate */
|
|
#define MIC_ACCUM(val) \
|
|
context->accum += (u64)(val) * context->coeff[coeff_position++];
|
|
|
|
static unsigned char aes_counter[16];
|
|
|
|
/* expand the key to fill the MMH coefficient array */
|
|
static void emmh32_setseed(emmh32_context *context, u8 *pkey, int keylen,
|
|
struct crypto_cipher *tfm)
|
|
{
|
|
/* take the keying material, expand if necessary, truncate at 16-bytes */
|
|
/* run through AES counter mode to generate context->coeff[] */
|
|
|
|
int i,j;
|
|
u32 counter;
|
|
u8 *cipher, plain[16];
|
|
|
|
crypto_cipher_setkey(tfm, pkey, 16);
|
|
counter = 0;
|
|
for (i = 0; i < ARRAY_SIZE(context->coeff); ) {
|
|
aes_counter[15] = (u8)(counter >> 0);
|
|
aes_counter[14] = (u8)(counter >> 8);
|
|
aes_counter[13] = (u8)(counter >> 16);
|
|
aes_counter[12] = (u8)(counter >> 24);
|
|
counter++;
|
|
memcpy (plain, aes_counter, 16);
|
|
crypto_cipher_encrypt_one(tfm, plain, plain);
|
|
cipher = plain;
|
|
for (j = 0; (j < 16) && (i < ARRAY_SIZE(context->coeff)); ) {
|
|
context->coeff[i++] = ntohl(*(u32 *)&cipher[j]);
|
|
j += 4;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* prepare for calculation of a new mic */
|
|
static void emmh32_init(emmh32_context *context)
|
|
{
|
|
/* prepare for new mic calculation */
|
|
context->accum = 0;
|
|
context->position = 0;
|
|
}
|
|
|
|
/* add some bytes to the mic calculation */
|
|
static void emmh32_update(emmh32_context *context, u8 *pOctets, int len)
|
|
{
|
|
int coeff_position, byte_position;
|
|
|
|
if (len == 0) return;
|
|
|
|
coeff_position = context->position >> 2;
|
|
|
|
/* deal with partial 32-bit word left over from last update */
|
|
byte_position = context->position & 3;
|
|
if (byte_position) {
|
|
/* have a partial word in part to deal with */
|
|
do {
|
|
if (len == 0) return;
|
|
context->part.d8[byte_position++] = *pOctets++;
|
|
context->position++;
|
|
len--;
|
|
} while (byte_position < 4);
|
|
MIC_ACCUM(htonl(context->part.d32));
|
|
}
|
|
|
|
/* deal with full 32-bit words */
|
|
while (len >= 4) {
|
|
MIC_ACCUM(htonl(*(u32 *)pOctets));
|
|
context->position += 4;
|
|
pOctets += 4;
|
|
len -= 4;
|
|
}
|
|
|
|
/* deal with partial 32-bit word that will be left over from this update */
|
|
byte_position = 0;
|
|
while (len > 0) {
|
|
context->part.d8[byte_position++] = *pOctets++;
|
|
context->position++;
|
|
len--;
|
|
}
|
|
}
|
|
|
|
/* mask used to zero empty bytes for final partial word */
|
|
static u32 mask32[4] = { 0x00000000L, 0xFF000000L, 0xFFFF0000L, 0xFFFFFF00L };
|
|
|
|
/* calculate the mic */
|
|
static void emmh32_final(emmh32_context *context, u8 digest[4])
|
|
{
|
|
int coeff_position, byte_position;
|
|
u32 val;
|
|
|
|
u64 sum, utmp;
|
|
s64 stmp;
|
|
|
|
coeff_position = context->position >> 2;
|
|
|
|
/* deal with partial 32-bit word left over from last update */
|
|
byte_position = context->position & 3;
|
|
if (byte_position) {
|
|
/* have a partial word in part to deal with */
|
|
val = htonl(context->part.d32);
|
|
MIC_ACCUM(val & mask32[byte_position]); /* zero empty bytes */
|
|
}
|
|
|
|
/* reduce the accumulated u64 to a 32-bit MIC */
|
|
sum = context->accum;
|
|
stmp = (sum & 0xffffffffLL) - ((sum >> 32) * 15);
|
|
utmp = (stmp & 0xffffffffLL) - ((stmp >> 32) * 15);
|
|
sum = utmp & 0xffffffffLL;
|
|
if (utmp > 0x10000000fLL)
|
|
sum -= 15;
|
|
|
|
val = (u32)sum;
|
|
digest[0] = (val>>24) & 0xFF;
|
|
digest[1] = (val>>16) & 0xFF;
|
|
digest[2] = (val>>8) & 0xFF;
|
|
digest[3] = val & 0xFF;
|
|
}
|
|
|
|
static int readBSSListRid(struct airo_info *ai, int first,
|
|
BSSListRid *list) {
|
|
int rc;
|
|
Cmd cmd;
|
|
Resp rsp;
|
|
|
|
if (first == 1) {
|
|
if (ai->flags & FLAG_RADIO_MASK) return -ENETDOWN;
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
cmd.cmd=CMD_LISTBSS;
|
|
if (down_interruptible(&ai->sem))
|
|
return -ERESTARTSYS;
|
|
ai->list_bss_task = current;
|
|
issuecommand(ai, &cmd, &rsp);
|
|
up(&ai->sem);
|
|
/* Let the command take effect */
|
|
schedule_timeout_uninterruptible(3 * HZ);
|
|
ai->list_bss_task = NULL;
|
|
}
|
|
rc = PC4500_readrid(ai, first ? ai->bssListFirst : ai->bssListNext,
|
|
list, ai->bssListRidLen, 1);
|
|
|
|
list->len = le16_to_cpu(list->len);
|
|
list->index = le16_to_cpu(list->index);
|
|
list->radioType = le16_to_cpu(list->radioType);
|
|
list->cap = le16_to_cpu(list->cap);
|
|
list->beaconInterval = le16_to_cpu(list->beaconInterval);
|
|
list->fh.dwell = le16_to_cpu(list->fh.dwell);
|
|
list->dsChannel = le16_to_cpu(list->dsChannel);
|
|
list->atimWindow = le16_to_cpu(list->atimWindow);
|
|
list->dBm = le16_to_cpu(list->dBm);
|
|
return rc;
|
|
}
|
|
|
|
static int readWepKeyRid(struct airo_info*ai, WepKeyRid *wkr, int temp, int lock) {
|
|
int rc = PC4500_readrid(ai, temp ? RID_WEP_TEMP : RID_WEP_PERM,
|
|
wkr, sizeof(*wkr), lock);
|
|
|
|
wkr->len = le16_to_cpu(wkr->len);
|
|
wkr->kindex = le16_to_cpu(wkr->kindex);
|
|
wkr->klen = le16_to_cpu(wkr->klen);
|
|
return rc;
|
|
}
|
|
/* In the writeXXXRid routines we copy the rids so that we don't screwup
|
|
* the originals when we endian them... */
|
|
static int writeWepKeyRid(struct airo_info*ai, WepKeyRid *pwkr, int perm, int lock) {
|
|
int rc;
|
|
WepKeyRid wkr = *pwkr;
|
|
|
|
wkr.len = cpu_to_le16(wkr.len);
|
|
wkr.kindex = cpu_to_le16(wkr.kindex);
|
|
wkr.klen = cpu_to_le16(wkr.klen);
|
|
rc = PC4500_writerid(ai, RID_WEP_TEMP, &wkr, sizeof(wkr), lock);
|
|
if (rc!=SUCCESS) airo_print_err(ai->dev->name, "WEP_TEMP set %x", rc);
|
|
if (perm) {
|
|
rc = PC4500_writerid(ai, RID_WEP_PERM, &wkr, sizeof(wkr), lock);
|
|
if (rc!=SUCCESS) {
|
|
airo_print_err(ai->dev->name, "WEP_PERM set %x", rc);
|
|
}
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
static int readSsidRid(struct airo_info*ai, SsidRid *ssidr) {
|
|
int i;
|
|
int rc = PC4500_readrid(ai, RID_SSID, ssidr, sizeof(*ssidr), 1);
|
|
|
|
ssidr->len = le16_to_cpu(ssidr->len);
|
|
for(i = 0; i < 3; i++) {
|
|
ssidr->ssids[i].len = le16_to_cpu(ssidr->ssids[i].len);
|
|
}
|
|
return rc;
|
|
}
|
|
static int writeSsidRid(struct airo_info*ai, SsidRid *pssidr, int lock) {
|
|
int rc;
|
|
int i;
|
|
SsidRid ssidr = *pssidr;
|
|
|
|
ssidr.len = cpu_to_le16(ssidr.len);
|
|
for(i = 0; i < 3; i++) {
|
|
ssidr.ssids[i].len = cpu_to_le16(ssidr.ssids[i].len);
|
|
}
|
|
rc = PC4500_writerid(ai, RID_SSID, &ssidr, sizeof(ssidr), lock);
|
|
return rc;
|
|
}
|
|
static int readConfigRid(struct airo_info*ai, int lock) {
|
|
int rc;
|
|
u16 *s;
|
|
ConfigRid cfg;
|
|
|
|
if (ai->config.len)
|
|
return SUCCESS;
|
|
|
|
rc = PC4500_readrid(ai, RID_ACTUALCONFIG, &cfg, sizeof(cfg), lock);
|
|
if (rc != SUCCESS)
|
|
return rc;
|
|
|
|
for(s = &cfg.len; s <= &cfg.rtsThres; s++) *s = le16_to_cpu(*s);
|
|
|
|
for(s = &cfg.shortRetryLimit; s <= &cfg.radioType; s++)
|
|
*s = le16_to_cpu(*s);
|
|
|
|
for(s = &cfg.txPower; s <= &cfg.radioSpecific; s++)
|
|
*s = le16_to_cpu(*s);
|
|
|
|
for(s = &cfg.arlThreshold; s <= &cfg._reserved4[0]; s++)
|
|
*s = cpu_to_le16(*s);
|
|
|
|
for(s = &cfg.autoWake; s <= &cfg.autoWake; s++)
|
|
*s = cpu_to_le16(*s);
|
|
|
|
ai->config = cfg;
|
|
return SUCCESS;
|
|
}
|
|
static inline void checkThrottle(struct airo_info *ai) {
|
|
int i;
|
|
/* Old hardware had a limit on encryption speed */
|
|
if (ai->config.authType != AUTH_OPEN && maxencrypt) {
|
|
for(i=0; i<8; i++) {
|
|
if (ai->config.rates[i] > maxencrypt) {
|
|
ai->config.rates[i] = 0;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
static int writeConfigRid(struct airo_info*ai, int lock) {
|
|
u16 *s;
|
|
ConfigRid cfgr;
|
|
|
|
if (!test_bit (FLAG_COMMIT, &ai->flags))
|
|
return SUCCESS;
|
|
|
|
clear_bit (FLAG_COMMIT, &ai->flags);
|
|
clear_bit (FLAG_RESET, &ai->flags);
|
|
checkThrottle(ai);
|
|
cfgr = ai->config;
|
|
|
|
if ((cfgr.opmode & 0xFF) == MODE_STA_IBSS)
|
|
set_bit(FLAG_ADHOC, &ai->flags);
|
|
else
|
|
clear_bit(FLAG_ADHOC, &ai->flags);
|
|
|
|
for(s = &cfgr.len; s <= &cfgr.rtsThres; s++) *s = cpu_to_le16(*s);
|
|
|
|
for(s = &cfgr.shortRetryLimit; s <= &cfgr.radioType; s++)
|
|
*s = cpu_to_le16(*s);
|
|
|
|
for(s = &cfgr.txPower; s <= &cfgr.radioSpecific; s++)
|
|
*s = cpu_to_le16(*s);
|
|
|
|
for(s = &cfgr.arlThreshold; s <= &cfgr._reserved4[0]; s++)
|
|
*s = cpu_to_le16(*s);
|
|
|
|
for(s = &cfgr.autoWake; s <= &cfgr.autoWake; s++)
|
|
*s = cpu_to_le16(*s);
|
|
|
|
return PC4500_writerid( ai, RID_CONFIG, &cfgr, sizeof(cfgr), lock);
|
|
}
|
|
static int readStatusRid(struct airo_info*ai, StatusRid *statr, int lock) {
|
|
int rc = PC4500_readrid(ai, RID_STATUS, statr, sizeof(*statr), lock);
|
|
u16 *s;
|
|
|
|
statr->len = le16_to_cpu(statr->len);
|
|
for(s = &statr->mode; s <= &statr->SSIDlen; s++) *s = le16_to_cpu(*s);
|
|
|
|
for(s = &statr->beaconPeriod; s <= &statr->shortPreamble; s++)
|
|
*s = le16_to_cpu(*s);
|
|
statr->load = le16_to_cpu(statr->load);
|
|
statr->assocStatus = le16_to_cpu(statr->assocStatus);
|
|
return rc;
|
|
}
|
|
static int readAPListRid(struct airo_info*ai, APListRid *aplr) {
|
|
int rc = PC4500_readrid(ai, RID_APLIST, aplr, sizeof(*aplr), 1);
|
|
aplr->len = le16_to_cpu(aplr->len);
|
|
return rc;
|
|
}
|
|
static int writeAPListRid(struct airo_info*ai, APListRid *aplr, int lock) {
|
|
int rc;
|
|
aplr->len = cpu_to_le16(aplr->len);
|
|
rc = PC4500_writerid(ai, RID_APLIST, aplr, sizeof(*aplr), lock);
|
|
return rc;
|
|
}
|
|
static int readCapabilityRid(struct airo_info*ai, CapabilityRid *capr, int lock) {
|
|
int rc = PC4500_readrid(ai, RID_CAPABILITIES, capr, sizeof(*capr), lock);
|
|
u16 *s;
|
|
|
|
capr->len = le16_to_cpu(capr->len);
|
|
capr->prodNum = le16_to_cpu(capr->prodNum);
|
|
capr->radioType = le16_to_cpu(capr->radioType);
|
|
capr->country = le16_to_cpu(capr->country);
|
|
for(s = &capr->txPowerLevels[0]; s <= &capr->requiredHard; s++)
|
|
*s = le16_to_cpu(*s);
|
|
return rc;
|
|
}
|
|
static int readStatsRid(struct airo_info*ai, StatsRid *sr, int rid, int lock) {
|
|
int rc = PC4500_readrid(ai, rid, sr, sizeof(*sr), lock);
|
|
u32 *i;
|
|
|
|
sr->len = le16_to_cpu(sr->len);
|
|
for(i = &sr->vals[0]; i <= &sr->vals[99]; i++) *i = le32_to_cpu(*i);
|
|
return rc;
|
|
}
|
|
|
|
static int airo_open(struct net_device *dev) {
|
|
struct airo_info *info = dev->priv;
|
|
Resp rsp;
|
|
|
|
if (test_bit(FLAG_FLASHING, &info->flags))
|
|
return -EIO;
|
|
|
|
/* Make sure the card is configured.
|
|
* Wireless Extensions may postpone config changes until the card
|
|
* is open (to pipeline changes and speed-up card setup). If
|
|
* those changes are not yet commited, do it now - Jean II */
|
|
if (test_bit (FLAG_COMMIT, &info->flags)) {
|
|
disable_MAC(info, 1);
|
|
writeConfigRid(info, 1);
|
|
}
|
|
|
|
if (info->wifidev != dev) {
|
|
/* Power on the MAC controller (which may have been disabled) */
|
|
clear_bit(FLAG_RADIO_DOWN, &info->flags);
|
|
enable_interrupts(info);
|
|
}
|
|
enable_MAC(info, &rsp, 1);
|
|
|
|
netif_start_queue(dev);
|
|
return 0;
|
|
}
|
|
|
|
static int mpi_start_xmit(struct sk_buff *skb, struct net_device *dev) {
|
|
int npacks, pending;
|
|
unsigned long flags;
|
|
struct airo_info *ai = dev->priv;
|
|
|
|
if (!skb) {
|
|
airo_print_err(dev->name, "%s: skb == NULL!",__FUNCTION__);
|
|
return 0;
|
|
}
|
|
npacks = skb_queue_len (&ai->txq);
|
|
|
|
if (npacks >= MAXTXQ - 1) {
|
|
netif_stop_queue (dev);
|
|
if (npacks > MAXTXQ) {
|
|
ai->stats.tx_fifo_errors++;
|
|
return 1;
|
|
}
|
|
skb_queue_tail (&ai->txq, skb);
|
|
return 0;
|
|
}
|
|
|
|
spin_lock_irqsave(&ai->aux_lock, flags);
|
|
skb_queue_tail (&ai->txq, skb);
|
|
pending = test_bit(FLAG_PENDING_XMIT, &ai->flags);
|
|
spin_unlock_irqrestore(&ai->aux_lock,flags);
|
|
netif_wake_queue (dev);
|
|
|
|
if (pending == 0) {
|
|
set_bit(FLAG_PENDING_XMIT, &ai->flags);
|
|
mpi_send_packet (dev);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* @mpi_send_packet
|
|
*
|
|
* Attempt to transmit a packet. Can be called from interrupt
|
|
* or transmit . return number of packets we tried to send
|
|
*/
|
|
|
|
static int mpi_send_packet (struct net_device *dev)
|
|
{
|
|
struct sk_buff *skb;
|
|
unsigned char *buffer;
|
|
s16 len, *payloadLen;
|
|
struct airo_info *ai = dev->priv;
|
|
u8 *sendbuf;
|
|
|
|
/* get a packet to send */
|
|
|
|
if ((skb = skb_dequeue(&ai->txq)) == 0) {
|
|
airo_print_err(dev->name,
|
|
"%s: Dequeue'd zero in send_packet()",
|
|
__FUNCTION__);
|
|
return 0;
|
|
}
|
|
|
|
/* check min length*/
|
|
len = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
|
|
buffer = skb->data;
|
|
|
|
ai->txfids[0].tx_desc.offset = 0;
|
|
ai->txfids[0].tx_desc.valid = 1;
|
|
ai->txfids[0].tx_desc.eoc = 1;
|
|
ai->txfids[0].tx_desc.len =len+sizeof(WifiHdr);
|
|
|
|
/*
|
|
* Magic, the cards firmware needs a length count (2 bytes) in the host buffer
|
|
* right after TXFID_HDR.The TXFID_HDR contains the status short so payloadlen
|
|
* is immediatly after it. ------------------------------------------------
|
|
* |TXFIDHDR+STATUS|PAYLOADLEN|802.3HDR|PACKETDATA|
|
|
* ------------------------------------------------
|
|
*/
|
|
|
|
memcpy((char *)ai->txfids[0].virtual_host_addr,
|
|
(char *)&wifictlhdr8023, sizeof(wifictlhdr8023));
|
|
|
|
payloadLen = (s16 *)(ai->txfids[0].virtual_host_addr +
|
|
sizeof(wifictlhdr8023));
|
|
sendbuf = ai->txfids[0].virtual_host_addr +
|
|
sizeof(wifictlhdr8023) + 2 ;
|
|
|
|
/*
|
|
* Firmware automaticly puts 802 header on so
|
|
* we don't need to account for it in the length
|
|
*/
|
|
if (test_bit(FLAG_MIC_CAPABLE, &ai->flags) && ai->micstats.enabled &&
|
|
(ntohs(((u16 *)buffer)[6]) != 0x888E)) {
|
|
MICBuffer pMic;
|
|
|
|
if (encapsulate(ai, (etherHead *)buffer, &pMic, len - sizeof(etherHead)) != SUCCESS)
|
|
return ERROR;
|
|
|
|
*payloadLen = cpu_to_le16(len-sizeof(etherHead)+sizeof(pMic));
|
|
ai->txfids[0].tx_desc.len += sizeof(pMic);
|
|
/* copy data into airo dma buffer */
|
|
memcpy (sendbuf, buffer, sizeof(etherHead));
|
|
buffer += sizeof(etherHead);
|
|
sendbuf += sizeof(etherHead);
|
|
memcpy (sendbuf, &pMic, sizeof(pMic));
|
|
sendbuf += sizeof(pMic);
|
|
memcpy (sendbuf, buffer, len - sizeof(etherHead));
|
|
} else {
|
|
*payloadLen = cpu_to_le16(len - sizeof(etherHead));
|
|
|
|
dev->trans_start = jiffies;
|
|
|
|
/* copy data into airo dma buffer */
|
|
memcpy(sendbuf, buffer, len);
|
|
}
|
|
|
|
memcpy_toio(ai->txfids[0].card_ram_off,
|
|
&ai->txfids[0].tx_desc, sizeof(TxFid));
|
|
|
|
OUT4500(ai, EVACK, 8);
|
|
|
|
dev_kfree_skb_any(skb);
|
|
return 1;
|
|
}
|
|
|
|
static void get_tx_error(struct airo_info *ai, s32 fid)
|
|
{
|
|
u16 status;
|
|
|
|
if (fid < 0)
|
|
status = ((WifiCtlHdr *)ai->txfids[0].virtual_host_addr)->ctlhdr.status;
|
|
else {
|
|
if (bap_setup(ai, ai->fids[fid] & 0xffff, 4, BAP0) != SUCCESS)
|
|
return;
|
|
bap_read(ai, &status, 2, BAP0);
|
|
}
|
|
if (le16_to_cpu(status) & 2) /* Too many retries */
|
|
ai->stats.tx_aborted_errors++;
|
|
if (le16_to_cpu(status) & 4) /* Transmit lifetime exceeded */
|
|
ai->stats.tx_heartbeat_errors++;
|
|
if (le16_to_cpu(status) & 8) /* Aid fail */
|
|
{ }
|
|
if (le16_to_cpu(status) & 0x10) /* MAC disabled */
|
|
ai->stats.tx_carrier_errors++;
|
|
if (le16_to_cpu(status) & 0x20) /* Association lost */
|
|
{ }
|
|
/* We produce a TXDROP event only for retry or lifetime
|
|
* exceeded, because that's the only status that really mean
|
|
* that this particular node went away.
|
|
* Other errors means that *we* screwed up. - Jean II */
|
|
if ((le16_to_cpu(status) & 2) ||
|
|
(le16_to_cpu(status) & 4)) {
|
|
union iwreq_data wrqu;
|
|
char junk[0x18];
|
|
|
|
/* Faster to skip over useless data than to do
|
|
* another bap_setup(). We are at offset 0x6 and
|
|
* need to go to 0x18 and read 6 bytes - Jean II */
|
|
bap_read(ai, (u16 *) junk, 0x18, BAP0);
|
|
|
|
/* Copy 802.11 dest address.
|
|
* We use the 802.11 header because the frame may
|
|
* not be 802.3 or may be mangled...
|
|
* In Ad-Hoc mode, it will be the node address.
|
|
* In managed mode, it will be most likely the AP addr
|
|
* User space will figure out how to convert it to
|
|
* whatever it needs (IP address or else).
|
|
* - Jean II */
|
|
memcpy(wrqu.addr.sa_data, junk + 0x12, ETH_ALEN);
|
|
wrqu.addr.sa_family = ARPHRD_ETHER;
|
|
|
|
/* Send event to user space */
|
|
wireless_send_event(ai->dev, IWEVTXDROP, &wrqu, NULL);
|
|
}
|
|
}
|
|
|
|
static void airo_end_xmit(struct net_device *dev) {
|
|
u16 status;
|
|
int i;
|
|
struct airo_info *priv = dev->priv;
|
|
struct sk_buff *skb = priv->xmit.skb;
|
|
int fid = priv->xmit.fid;
|
|
u32 *fids = priv->fids;
|
|
|
|
clear_bit(JOB_XMIT, &priv->jobs);
|
|
clear_bit(FLAG_PENDING_XMIT, &priv->flags);
|
|
status = transmit_802_3_packet (priv, fids[fid], skb->data);
|
|
up(&priv->sem);
|
|
|
|
i = 0;
|
|
if ( status == SUCCESS ) {
|
|
dev->trans_start = jiffies;
|
|
for (; i < MAX_FIDS / 2 && (priv->fids[i] & 0xffff0000); i++);
|
|
} else {
|
|
priv->fids[fid] &= 0xffff;
|
|
priv->stats.tx_window_errors++;
|
|
}
|
|
if (i < MAX_FIDS / 2)
|
|
netif_wake_queue(dev);
|
|
dev_kfree_skb(skb);
|
|
}
|
|
|
|
static int airo_start_xmit(struct sk_buff *skb, struct net_device *dev) {
|
|
s16 len;
|
|
int i, j;
|
|
struct airo_info *priv = dev->priv;
|
|
u32 *fids = priv->fids;
|
|
|
|
if ( skb == NULL ) {
|
|
airo_print_err(dev->name, "%s: skb == NULL!", __FUNCTION__);
|
|
return 0;
|
|
}
|
|
|
|
/* Find a vacant FID */
|
|
for( i = 0; i < MAX_FIDS / 2 && (fids[i] & 0xffff0000); i++ );
|
|
for( j = i + 1; j < MAX_FIDS / 2 && (fids[j] & 0xffff0000); j++ );
|
|
|
|
if ( j >= MAX_FIDS / 2 ) {
|
|
netif_stop_queue(dev);
|
|
|
|
if (i == MAX_FIDS / 2) {
|
|
priv->stats.tx_fifo_errors++;
|
|
return 1;
|
|
}
|
|
}
|
|
/* check min length*/
|
|
len = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
|
|
/* Mark fid as used & save length for later */
|
|
fids[i] |= (len << 16);
|
|
priv->xmit.skb = skb;
|
|
priv->xmit.fid = i;
|
|
if (down_trylock(&priv->sem) != 0) {
|
|
set_bit(FLAG_PENDING_XMIT, &priv->flags);
|
|
netif_stop_queue(dev);
|
|
set_bit(JOB_XMIT, &priv->jobs);
|
|
wake_up_interruptible(&priv->thr_wait);
|
|
} else
|
|
airo_end_xmit(dev);
|
|
return 0;
|
|
}
|
|
|
|
static void airo_end_xmit11(struct net_device *dev) {
|
|
u16 status;
|
|
int i;
|
|
struct airo_info *priv = dev->priv;
|
|
struct sk_buff *skb = priv->xmit11.skb;
|
|
int fid = priv->xmit11.fid;
|
|
u32 *fids = priv->fids;
|
|
|
|
clear_bit(JOB_XMIT11, &priv->jobs);
|
|
clear_bit(FLAG_PENDING_XMIT11, &priv->flags);
|
|
status = transmit_802_11_packet (priv, fids[fid], skb->data);
|
|
up(&priv->sem);
|
|
|
|
i = MAX_FIDS / 2;
|
|
if ( status == SUCCESS ) {
|
|
dev->trans_start = jiffies;
|
|
for (; i < MAX_FIDS && (priv->fids[i] & 0xffff0000); i++);
|
|
} else {
|
|
priv->fids[fid] &= 0xffff;
|
|
priv->stats.tx_window_errors++;
|
|
}
|
|
if (i < MAX_FIDS)
|
|
netif_wake_queue(dev);
|
|
dev_kfree_skb(skb);
|
|
}
|
|
|
|
static int airo_start_xmit11(struct sk_buff *skb, struct net_device *dev) {
|
|
s16 len;
|
|
int i, j;
|
|
struct airo_info *priv = dev->priv;
|
|
u32 *fids = priv->fids;
|
|
|
|
if (test_bit(FLAG_MPI, &priv->flags)) {
|
|
/* Not implemented yet for MPI350 */
|
|
netif_stop_queue(dev);
|
|
return -ENETDOWN;
|
|
}
|
|
|
|
if ( skb == NULL ) {
|
|
airo_print_err(dev->name, "%s: skb == NULL!", __FUNCTION__);
|
|
return 0;
|
|
}
|
|
|
|
/* Find a vacant FID */
|
|
for( i = MAX_FIDS / 2; i < MAX_FIDS && (fids[i] & 0xffff0000); i++ );
|
|
for( j = i + 1; j < MAX_FIDS && (fids[j] & 0xffff0000); j++ );
|
|
|
|
if ( j >= MAX_FIDS ) {
|
|
netif_stop_queue(dev);
|
|
|
|
if (i == MAX_FIDS) {
|
|
priv->stats.tx_fifo_errors++;
|
|
return 1;
|
|
}
|
|
}
|
|
/* check min length*/
|
|
len = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
|
|
/* Mark fid as used & save length for later */
|
|
fids[i] |= (len << 16);
|
|
priv->xmit11.skb = skb;
|
|
priv->xmit11.fid = i;
|
|
if (down_trylock(&priv->sem) != 0) {
|
|
set_bit(FLAG_PENDING_XMIT11, &priv->flags);
|
|
netif_stop_queue(dev);
|
|
set_bit(JOB_XMIT11, &priv->jobs);
|
|
wake_up_interruptible(&priv->thr_wait);
|
|
} else
|
|
airo_end_xmit11(dev);
|
|
return 0;
|
|
}
|
|
|
|
static void airo_read_stats(struct airo_info *ai) {
|
|
StatsRid stats_rid;
|
|
u32 *vals = stats_rid.vals;
|
|
|
|
clear_bit(JOB_STATS, &ai->jobs);
|
|
if (ai->power.event) {
|
|
up(&ai->sem);
|
|
return;
|
|
}
|
|
readStatsRid(ai, &stats_rid, RID_STATS, 0);
|
|
up(&ai->sem);
|
|
|
|
ai->stats.rx_packets = vals[43] + vals[44] + vals[45];
|
|
ai->stats.tx_packets = vals[39] + vals[40] + vals[41];
|
|
ai->stats.rx_bytes = vals[92];
|
|
ai->stats.tx_bytes = vals[91];
|
|
ai->stats.rx_errors = vals[0] + vals[2] + vals[3] + vals[4];
|
|
ai->stats.tx_errors = vals[42] + ai->stats.tx_fifo_errors;
|
|
ai->stats.multicast = vals[43];
|
|
ai->stats.collisions = vals[89];
|
|
|
|
/* detailed rx_errors: */
|
|
ai->stats.rx_length_errors = vals[3];
|
|
ai->stats.rx_crc_errors = vals[4];
|
|
ai->stats.rx_frame_errors = vals[2];
|
|
ai->stats.rx_fifo_errors = vals[0];
|
|
}
|
|
|
|
static struct net_device_stats *airo_get_stats(struct net_device *dev)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
|
|
if (!test_bit(JOB_STATS, &local->jobs)) {
|
|
/* Get stats out of the card if available */
|
|
if (down_trylock(&local->sem) != 0) {
|
|
set_bit(JOB_STATS, &local->jobs);
|
|
wake_up_interruptible(&local->thr_wait);
|
|
} else
|
|
airo_read_stats(local);
|
|
}
|
|
|
|
return &local->stats;
|
|
}
|
|
|
|
static void airo_set_promisc(struct airo_info *ai) {
|
|
Cmd cmd;
|
|
Resp rsp;
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
cmd.cmd=CMD_SETMODE;
|
|
clear_bit(JOB_PROMISC, &ai->jobs);
|
|
cmd.parm0=(ai->flags&IFF_PROMISC) ? PROMISC : NOPROMISC;
|
|
issuecommand(ai, &cmd, &rsp);
|
|
up(&ai->sem);
|
|
}
|
|
|
|
static void airo_set_multicast_list(struct net_device *dev) {
|
|
struct airo_info *ai = dev->priv;
|
|
|
|
if ((dev->flags ^ ai->flags) & IFF_PROMISC) {
|
|
change_bit(FLAG_PROMISC, &ai->flags);
|
|
if (down_trylock(&ai->sem) != 0) {
|
|
set_bit(JOB_PROMISC, &ai->jobs);
|
|
wake_up_interruptible(&ai->thr_wait);
|
|
} else
|
|
airo_set_promisc(ai);
|
|
}
|
|
|
|
if ((dev->flags&IFF_ALLMULTI)||dev->mc_count>0) {
|
|
/* Turn on multicast. (Should be already setup...) */
|
|
}
|
|
}
|
|
|
|
static int airo_set_mac_address(struct net_device *dev, void *p)
|
|
{
|
|
struct airo_info *ai = dev->priv;
|
|
struct sockaddr *addr = p;
|
|
Resp rsp;
|
|
|
|
readConfigRid(ai, 1);
|
|
memcpy (ai->config.macAddr, addr->sa_data, dev->addr_len);
|
|
set_bit (FLAG_COMMIT, &ai->flags);
|
|
disable_MAC(ai, 1);
|
|
writeConfigRid (ai, 1);
|
|
enable_MAC(ai, &rsp, 1);
|
|
memcpy (ai->dev->dev_addr, addr->sa_data, dev->addr_len);
|
|
if (ai->wifidev)
|
|
memcpy (ai->wifidev->dev_addr, addr->sa_data, dev->addr_len);
|
|
return 0;
|
|
}
|
|
|
|
static int airo_change_mtu(struct net_device *dev, int new_mtu)
|
|
{
|
|
if ((new_mtu < 68) || (new_mtu > 2400))
|
|
return -EINVAL;
|
|
dev->mtu = new_mtu;
|
|
return 0;
|
|
}
|
|
|
|
static LIST_HEAD(airo_devices);
|
|
|
|
static void add_airo_dev(struct airo_info *ai)
|
|
{
|
|
/* Upper layers already keep track of PCI devices,
|
|
* so we only need to remember our non-PCI cards. */
|
|
if (!ai->pci)
|
|
list_add_tail(&ai->dev_list, &airo_devices);
|
|
}
|
|
|
|
static void del_airo_dev(struct airo_info *ai)
|
|
{
|
|
if (!ai->pci)
|
|
list_del(&ai->dev_list);
|
|
}
|
|
|
|
static int airo_close(struct net_device *dev) {
|
|
struct airo_info *ai = dev->priv;
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
if (ai->wifidev != dev) {
|
|
#ifdef POWER_ON_DOWN
|
|
/* Shut power to the card. The idea is that the user can save
|
|
* power when he doesn't need the card with "ifconfig down".
|
|
* That's the method that is most friendly towards the network
|
|
* stack (i.e. the network stack won't try to broadcast
|
|
* anything on the interface and routes are gone. Jean II */
|
|
set_bit(FLAG_RADIO_DOWN, &ai->flags);
|
|
disable_MAC(ai, 1);
|
|
#endif
|
|
disable_interrupts( ai );
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
void stop_airo_card( struct net_device *dev, int freeres )
|
|
{
|
|
struct airo_info *ai = dev->priv;
|
|
|
|
set_bit(FLAG_RADIO_DOWN, &ai->flags);
|
|
disable_MAC(ai, 1);
|
|
disable_interrupts(ai);
|
|
free_irq( dev->irq, dev );
|
|
takedown_proc_entry( dev, ai );
|
|
if (test_bit(FLAG_REGISTERED, &ai->flags)) {
|
|
unregister_netdev( dev );
|
|
if (ai->wifidev) {
|
|
unregister_netdev(ai->wifidev);
|
|
free_netdev(ai->wifidev);
|
|
ai->wifidev = NULL;
|
|
}
|
|
clear_bit(FLAG_REGISTERED, &ai->flags);
|
|
}
|
|
set_bit(JOB_DIE, &ai->jobs);
|
|
kthread_stop(ai->airo_thread_task);
|
|
|
|
/*
|
|
* Clean out tx queue
|
|
*/
|
|
if (test_bit(FLAG_MPI, &ai->flags) && !skb_queue_empty(&ai->txq)) {
|
|
struct sk_buff *skb = NULL;
|
|
for (;(skb = skb_dequeue(&ai->txq));)
|
|
dev_kfree_skb(skb);
|
|
}
|
|
|
|
airo_networks_free (ai);
|
|
|
|
kfree(ai->flash);
|
|
kfree(ai->rssi);
|
|
kfree(ai->APList);
|
|
kfree(ai->SSID);
|
|
if (freeres) {
|
|
/* PCMCIA frees this stuff, so only for PCI and ISA */
|
|
release_region( dev->base_addr, 64 );
|
|
if (test_bit(FLAG_MPI, &ai->flags)) {
|
|
if (ai->pci)
|
|
mpi_unmap_card(ai->pci);
|
|
if (ai->pcimem)
|
|
iounmap(ai->pcimem);
|
|
if (ai->pciaux)
|
|
iounmap(ai->pciaux);
|
|
pci_free_consistent(ai->pci, PCI_SHARED_LEN,
|
|
ai->shared, ai->shared_dma);
|
|
}
|
|
}
|
|
crypto_free_cipher(ai->tfm);
|
|
del_airo_dev(ai);
|
|
free_netdev( dev );
|
|
}
|
|
|
|
EXPORT_SYMBOL(stop_airo_card);
|
|
|
|
static int wll_header_parse(struct sk_buff *skb, unsigned char *haddr)
|
|
{
|
|
memcpy(haddr, skb_mac_header(skb) + 10, ETH_ALEN);
|
|
return ETH_ALEN;
|
|
}
|
|
|
|
static void mpi_unmap_card(struct pci_dev *pci)
|
|
{
|
|
unsigned long mem_start = pci_resource_start(pci, 1);
|
|
unsigned long mem_len = pci_resource_len(pci, 1);
|
|
unsigned long aux_start = pci_resource_start(pci, 2);
|
|
unsigned long aux_len = AUXMEMSIZE;
|
|
|
|
release_mem_region(aux_start, aux_len);
|
|
release_mem_region(mem_start, mem_len);
|
|
}
|
|
|
|
/*************************************************************
|
|
* This routine assumes that descriptors have been setup .
|
|
* Run at insmod time or after reset when the decriptors
|
|
* have been initialized . Returns 0 if all is well nz
|
|
* otherwise . Does not allocate memory but sets up card
|
|
* using previously allocated descriptors.
|
|
*/
|
|
static int mpi_init_descriptors (struct airo_info *ai)
|
|
{
|
|
Cmd cmd;
|
|
Resp rsp;
|
|
int i;
|
|
int rc = SUCCESS;
|
|
|
|
/* Alloc card RX descriptors */
|
|
netif_stop_queue(ai->dev);
|
|
|
|
memset(&rsp,0,sizeof(rsp));
|
|
memset(&cmd,0,sizeof(cmd));
|
|
|
|
cmd.cmd = CMD_ALLOCATEAUX;
|
|
cmd.parm0 = FID_RX;
|
|
cmd.parm1 = (ai->rxfids[0].card_ram_off - ai->pciaux);
|
|
cmd.parm2 = MPI_MAX_FIDS;
|
|
rc=issuecommand(ai, &cmd, &rsp);
|
|
if (rc != SUCCESS) {
|
|
airo_print_err(ai->dev->name, "Couldn't allocate RX FID");
|
|
return rc;
|
|
}
|
|
|
|
for (i=0; i<MPI_MAX_FIDS; i++) {
|
|
memcpy_toio(ai->rxfids[i].card_ram_off,
|
|
&ai->rxfids[i].rx_desc, sizeof(RxFid));
|
|
}
|
|
|
|
/* Alloc card TX descriptors */
|
|
|
|
memset(&rsp,0,sizeof(rsp));
|
|
memset(&cmd,0,sizeof(cmd));
|
|
|
|
cmd.cmd = CMD_ALLOCATEAUX;
|
|
cmd.parm0 = FID_TX;
|
|
cmd.parm1 = (ai->txfids[0].card_ram_off - ai->pciaux);
|
|
cmd.parm2 = MPI_MAX_FIDS;
|
|
|
|
for (i=0; i<MPI_MAX_FIDS; i++) {
|
|
ai->txfids[i].tx_desc.valid = 1;
|
|
memcpy_toio(ai->txfids[i].card_ram_off,
|
|
&ai->txfids[i].tx_desc, sizeof(TxFid));
|
|
}
|
|
ai->txfids[i-1].tx_desc.eoc = 1; /* Last descriptor has EOC set */
|
|
|
|
rc=issuecommand(ai, &cmd, &rsp);
|
|
if (rc != SUCCESS) {
|
|
airo_print_err(ai->dev->name, "Couldn't allocate TX FID");
|
|
return rc;
|
|
}
|
|
|
|
/* Alloc card Rid descriptor */
|
|
memset(&rsp,0,sizeof(rsp));
|
|
memset(&cmd,0,sizeof(cmd));
|
|
|
|
cmd.cmd = CMD_ALLOCATEAUX;
|
|
cmd.parm0 = RID_RW;
|
|
cmd.parm1 = (ai->config_desc.card_ram_off - ai->pciaux);
|
|
cmd.parm2 = 1; /* Magic number... */
|
|
rc=issuecommand(ai, &cmd, &rsp);
|
|
if (rc != SUCCESS) {
|
|
airo_print_err(ai->dev->name, "Couldn't allocate RID");
|
|
return rc;
|
|
}
|
|
|
|
memcpy_toio(ai->config_desc.card_ram_off,
|
|
&ai->config_desc.rid_desc, sizeof(Rid));
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* We are setting up three things here:
|
|
* 1) Map AUX memory for descriptors: Rid, TxFid, or RxFid.
|
|
* 2) Map PCI memory for issueing commands.
|
|
* 3) Allocate memory (shared) to send and receive ethernet frames.
|
|
*/
|
|
static int mpi_map_card(struct airo_info *ai, struct pci_dev *pci,
|
|
const char *name)
|
|
{
|
|
unsigned long mem_start, mem_len, aux_start, aux_len;
|
|
int rc = -1;
|
|
int i;
|
|
dma_addr_t busaddroff;
|
|
unsigned char *vpackoff;
|
|
unsigned char __iomem *pciaddroff;
|
|
|
|
mem_start = pci_resource_start(pci, 1);
|
|
mem_len = pci_resource_len(pci, 1);
|
|
aux_start = pci_resource_start(pci, 2);
|
|
aux_len = AUXMEMSIZE;
|
|
|
|
if (!request_mem_region(mem_start, mem_len, name)) {
|
|
airo_print_err(ai->dev->name, "Couldn't get region %x[%x] for %s",
|
|
(int)mem_start, (int)mem_len, name);
|
|
goto out;
|
|
}
|
|
if (!request_mem_region(aux_start, aux_len, name)) {
|
|
airo_print_err(ai->dev->name, "Couldn't get region %x[%x] for %s",
|
|
(int)aux_start, (int)aux_len, name);
|
|
goto free_region1;
|
|
}
|
|
|
|
ai->pcimem = ioremap(mem_start, mem_len);
|
|
if (!ai->pcimem) {
|
|
airo_print_err(ai->dev->name, "Couldn't map region %x[%x] for %s",
|
|
(int)mem_start, (int)mem_len, name);
|
|
goto free_region2;
|
|
}
|
|
ai->pciaux = ioremap(aux_start, aux_len);
|
|
if (!ai->pciaux) {
|
|
airo_print_err(ai->dev->name, "Couldn't map region %x[%x] for %s",
|
|
(int)aux_start, (int)aux_len, name);
|
|
goto free_memmap;
|
|
}
|
|
|
|
/* Reserve PKTSIZE for each fid and 2K for the Rids */
|
|
ai->shared = pci_alloc_consistent(pci, PCI_SHARED_LEN, &ai->shared_dma);
|
|
if (!ai->shared) {
|
|
airo_print_err(ai->dev->name, "Couldn't alloc_consistent %d",
|
|
PCI_SHARED_LEN);
|
|
goto free_auxmap;
|
|
}
|
|
|
|
/*
|
|
* Setup descriptor RX, TX, CONFIG
|
|
*/
|
|
busaddroff = ai->shared_dma;
|
|
pciaddroff = ai->pciaux + AUX_OFFSET;
|
|
vpackoff = ai->shared;
|
|
|
|
/* RX descriptor setup */
|
|
for(i = 0; i < MPI_MAX_FIDS; i++) {
|
|
ai->rxfids[i].pending = 0;
|
|
ai->rxfids[i].card_ram_off = pciaddroff;
|
|
ai->rxfids[i].virtual_host_addr = vpackoff;
|
|
ai->rxfids[i].rx_desc.host_addr = busaddroff;
|
|
ai->rxfids[i].rx_desc.valid = 1;
|
|
ai->rxfids[i].rx_desc.len = PKTSIZE;
|
|
ai->rxfids[i].rx_desc.rdy = 0;
|
|
|
|
pciaddroff += sizeof(RxFid);
|
|
busaddroff += PKTSIZE;
|
|
vpackoff += PKTSIZE;
|
|
}
|
|
|
|
/* TX descriptor setup */
|
|
for(i = 0; i < MPI_MAX_FIDS; i++) {
|
|
ai->txfids[i].card_ram_off = pciaddroff;
|
|
ai->txfids[i].virtual_host_addr = vpackoff;
|
|
ai->txfids[i].tx_desc.valid = 1;
|
|
ai->txfids[i].tx_desc.host_addr = busaddroff;
|
|
memcpy(ai->txfids[i].virtual_host_addr,
|
|
&wifictlhdr8023, sizeof(wifictlhdr8023));
|
|
|
|
pciaddroff += sizeof(TxFid);
|
|
busaddroff += PKTSIZE;
|
|
vpackoff += PKTSIZE;
|
|
}
|
|
ai->txfids[i-1].tx_desc.eoc = 1; /* Last descriptor has EOC set */
|
|
|
|
/* Rid descriptor setup */
|
|
ai->config_desc.card_ram_off = pciaddroff;
|
|
ai->config_desc.virtual_host_addr = vpackoff;
|
|
ai->config_desc.rid_desc.host_addr = busaddroff;
|
|
ai->ridbus = busaddroff;
|
|
ai->config_desc.rid_desc.rid = 0;
|
|
ai->config_desc.rid_desc.len = RIDSIZE;
|
|
ai->config_desc.rid_desc.valid = 1;
|
|
pciaddroff += sizeof(Rid);
|
|
busaddroff += RIDSIZE;
|
|
vpackoff += RIDSIZE;
|
|
|
|
/* Tell card about descriptors */
|
|
if (mpi_init_descriptors (ai) != SUCCESS)
|
|
goto free_shared;
|
|
|
|
return 0;
|
|
free_shared:
|
|
pci_free_consistent(pci, PCI_SHARED_LEN, ai->shared, ai->shared_dma);
|
|
free_auxmap:
|
|
iounmap(ai->pciaux);
|
|
free_memmap:
|
|
iounmap(ai->pcimem);
|
|
free_region2:
|
|
release_mem_region(aux_start, aux_len);
|
|
free_region1:
|
|
release_mem_region(mem_start, mem_len);
|
|
out:
|
|
return rc;
|
|
}
|
|
|
|
static void wifi_setup(struct net_device *dev)
|
|
{
|
|
dev->hard_header = NULL;
|
|
dev->rebuild_header = NULL;
|
|
dev->hard_header_cache = NULL;
|
|
dev->header_cache_update= NULL;
|
|
|
|
dev->hard_header_parse = wll_header_parse;
|
|
dev->hard_start_xmit = &airo_start_xmit11;
|
|
dev->get_stats = &airo_get_stats;
|
|
dev->set_mac_address = &airo_set_mac_address;
|
|
dev->do_ioctl = &airo_ioctl;
|
|
dev->wireless_handlers = &airo_handler_def;
|
|
dev->change_mtu = &airo_change_mtu;
|
|
dev->open = &airo_open;
|
|
dev->stop = &airo_close;
|
|
|
|
dev->type = ARPHRD_IEEE80211;
|
|
dev->hard_header_len = ETH_HLEN;
|
|
dev->mtu = AIRO_DEF_MTU;
|
|
dev->addr_len = ETH_ALEN;
|
|
dev->tx_queue_len = 100;
|
|
|
|
memset(dev->broadcast,0xFF, ETH_ALEN);
|
|
|
|
dev->flags = IFF_BROADCAST|IFF_MULTICAST;
|
|
}
|
|
|
|
static struct net_device *init_wifidev(struct airo_info *ai,
|
|
struct net_device *ethdev)
|
|
{
|
|
int err;
|
|
struct net_device *dev = alloc_netdev(0, "wifi%d", wifi_setup);
|
|
if (!dev)
|
|
return NULL;
|
|
dev->priv = ethdev->priv;
|
|
dev->irq = ethdev->irq;
|
|
dev->base_addr = ethdev->base_addr;
|
|
dev->wireless_data = ethdev->wireless_data;
|
|
memcpy(dev->dev_addr, ethdev->dev_addr, dev->addr_len);
|
|
err = register_netdev(dev);
|
|
if (err<0) {
|
|
free_netdev(dev);
|
|
return NULL;
|
|
}
|
|
return dev;
|
|
}
|
|
|
|
static int reset_card( struct net_device *dev , int lock) {
|
|
struct airo_info *ai = dev->priv;
|
|
|
|
if (lock && down_interruptible(&ai->sem))
|
|
return -1;
|
|
waitbusy (ai);
|
|
OUT4500(ai,COMMAND,CMD_SOFTRESET);
|
|
msleep(200);
|
|
waitbusy (ai);
|
|
msleep(200);
|
|
if (lock)
|
|
up(&ai->sem);
|
|
return 0;
|
|
}
|
|
|
|
#define AIRO_MAX_NETWORK_COUNT 64
|
|
static int airo_networks_allocate(struct airo_info *ai)
|
|
{
|
|
if (ai->networks)
|
|
return 0;
|
|
|
|
ai->networks =
|
|
kzalloc(AIRO_MAX_NETWORK_COUNT * sizeof(BSSListElement),
|
|
GFP_KERNEL);
|
|
if (!ai->networks) {
|
|
airo_print_warn(ai->dev->name, "Out of memory allocating beacons");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void airo_networks_free(struct airo_info *ai)
|
|
{
|
|
kfree(ai->networks);
|
|
ai->networks = NULL;
|
|
}
|
|
|
|
static void airo_networks_initialize(struct airo_info *ai)
|
|
{
|
|
int i;
|
|
|
|
INIT_LIST_HEAD(&ai->network_free_list);
|
|
INIT_LIST_HEAD(&ai->network_list);
|
|
for (i = 0; i < AIRO_MAX_NETWORK_COUNT; i++)
|
|
list_add_tail(&ai->networks[i].list,
|
|
&ai->network_free_list);
|
|
}
|
|
|
|
static int airo_test_wpa_capable(struct airo_info *ai)
|
|
{
|
|
int status;
|
|
CapabilityRid cap_rid;
|
|
const char *name = ai->dev->name;
|
|
|
|
status = readCapabilityRid(ai, &cap_rid, 1);
|
|
if (status != SUCCESS) return 0;
|
|
|
|
/* Only firmware versions 5.30.17 or better can do WPA */
|
|
if ((cap_rid.softVer > 0x530)
|
|
|| ((cap_rid.softVer == 0x530) && (cap_rid.softSubVer >= 17))) {
|
|
airo_print_info(name, "WPA is supported.");
|
|
return 1;
|
|
}
|
|
|
|
/* No WPA support */
|
|
airo_print_info(name, "WPA unsupported (only firmware versions 5.30.17"
|
|
" and greater support WPA. Detected %s)", cap_rid.prodVer);
|
|
return 0;
|
|
}
|
|
|
|
static struct net_device *_init_airo_card( unsigned short irq, int port,
|
|
int is_pcmcia, struct pci_dev *pci,
|
|
struct device *dmdev )
|
|
{
|
|
struct net_device *dev;
|
|
struct airo_info *ai;
|
|
int i, rc;
|
|
|
|
/* Create the network device object. */
|
|
dev = alloc_etherdev(sizeof(*ai));
|
|
if (!dev) {
|
|
airo_print_err("", "Couldn't alloc_etherdev");
|
|
return NULL;
|
|
}
|
|
if (dev_alloc_name(dev, dev->name) < 0) {
|
|
airo_print_err("", "Couldn't get name!");
|
|
goto err_out_free;
|
|
}
|
|
|
|
ai = dev->priv;
|
|
ai->wifidev = NULL;
|
|
ai->flags = 0;
|
|
ai->jobs = 0;
|
|
ai->dev = dev;
|
|
if (pci && (pci->device == 0x5000 || pci->device == 0xa504)) {
|
|
airo_print_dbg(dev->name, "Found an MPI350 card");
|
|
set_bit(FLAG_MPI, &ai->flags);
|
|
}
|
|
spin_lock_init(&ai->aux_lock);
|
|
sema_init(&ai->sem, 1);
|
|
ai->config.len = 0;
|
|
ai->pci = pci;
|
|
init_waitqueue_head (&ai->thr_wait);
|
|
ai->airo_thread_task = kthread_run(airo_thread, dev, dev->name);
|
|
if (IS_ERR(ai->airo_thread_task))
|
|
goto err_out_free;
|
|
ai->tfm = NULL;
|
|
add_airo_dev(ai);
|
|
|
|
if (airo_networks_allocate (ai))
|
|
goto err_out_thr;
|
|
airo_networks_initialize (ai);
|
|
|
|
/* The Airo-specific entries in the device structure. */
|
|
if (test_bit(FLAG_MPI,&ai->flags)) {
|
|
skb_queue_head_init (&ai->txq);
|
|
dev->hard_start_xmit = &mpi_start_xmit;
|
|
} else
|
|
dev->hard_start_xmit = &airo_start_xmit;
|
|
dev->get_stats = &airo_get_stats;
|
|
dev->set_multicast_list = &airo_set_multicast_list;
|
|
dev->set_mac_address = &airo_set_mac_address;
|
|
dev->do_ioctl = &airo_ioctl;
|
|
dev->wireless_handlers = &airo_handler_def;
|
|
ai->wireless_data.spy_data = &ai->spy_data;
|
|
dev->wireless_data = &ai->wireless_data;
|
|
dev->change_mtu = &airo_change_mtu;
|
|
dev->open = &airo_open;
|
|
dev->stop = &airo_close;
|
|
dev->irq = irq;
|
|
dev->base_addr = port;
|
|
|
|
SET_NETDEV_DEV(dev, dmdev);
|
|
|
|
reset_card (dev, 1);
|
|
msleep(400);
|
|
|
|
rc = request_irq( dev->irq, airo_interrupt, IRQF_SHARED, dev->name, dev );
|
|
if (rc) {
|
|
airo_print_err(dev->name, "register interrupt %d failed, rc %d",
|
|
irq, rc);
|
|
goto err_out_nets;
|
|
}
|
|
if (!is_pcmcia) {
|
|
if (!request_region( dev->base_addr, 64, dev->name )) {
|
|
rc = -EBUSY;
|
|
airo_print_err(dev->name, "Couldn't request region");
|
|
goto err_out_irq;
|
|
}
|
|
}
|
|
|
|
if (test_bit(FLAG_MPI,&ai->flags)) {
|
|
if (mpi_map_card(ai, pci, dev->name)) {
|
|
airo_print_err(dev->name, "Could not map memory");
|
|
goto err_out_res;
|
|
}
|
|
}
|
|
|
|
if (probe) {
|
|
if ( setup_card( ai, dev->dev_addr, 1 ) != SUCCESS ) {
|
|
airo_print_err(dev->name, "MAC could not be enabled" );
|
|
rc = -EIO;
|
|
goto err_out_map;
|
|
}
|
|
} else if (!test_bit(FLAG_MPI,&ai->flags)) {
|
|
ai->bap_read = fast_bap_read;
|
|
set_bit(FLAG_FLASHING, &ai->flags);
|
|
}
|
|
|
|
/* Test for WPA support */
|
|
if (airo_test_wpa_capable(ai)) {
|
|
set_bit(FLAG_WPA_CAPABLE, &ai->flags);
|
|
ai->bssListFirst = RID_WPA_BSSLISTFIRST;
|
|
ai->bssListNext = RID_WPA_BSSLISTNEXT;
|
|
ai->bssListRidLen = sizeof(BSSListRid);
|
|
} else {
|
|
ai->bssListFirst = RID_BSSLISTFIRST;
|
|
ai->bssListNext = RID_BSSLISTNEXT;
|
|
ai->bssListRidLen = sizeof(BSSListRid) - sizeof(BSSListRidExtra);
|
|
}
|
|
|
|
rc = register_netdev(dev);
|
|
if (rc) {
|
|
airo_print_err(dev->name, "Couldn't register_netdev");
|
|
goto err_out_map;
|
|
}
|
|
ai->wifidev = init_wifidev(ai, dev);
|
|
if (!ai->wifidev)
|
|
goto err_out_reg;
|
|
|
|
set_bit(FLAG_REGISTERED,&ai->flags);
|
|
airo_print_info(dev->name, "MAC enabled %x:%x:%x:%x:%x:%x",
|
|
dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
|
|
dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5] );
|
|
|
|
/* Allocate the transmit buffers */
|
|
if (probe && !test_bit(FLAG_MPI,&ai->flags))
|
|
for( i = 0; i < MAX_FIDS; i++ )
|
|
ai->fids[i] = transmit_allocate(ai,AIRO_DEF_MTU,i>=MAX_FIDS/2);
|
|
|
|
if (setup_proc_entry(dev, dev->priv) < 0)
|
|
goto err_out_wifi;
|
|
|
|
netif_start_queue(dev);
|
|
SET_MODULE_OWNER(dev);
|
|
return dev;
|
|
|
|
err_out_wifi:
|
|
unregister_netdev(ai->wifidev);
|
|
free_netdev(ai->wifidev);
|
|
err_out_reg:
|
|
unregister_netdev(dev);
|
|
err_out_map:
|
|
if (test_bit(FLAG_MPI,&ai->flags) && pci) {
|
|
pci_free_consistent(pci, PCI_SHARED_LEN, ai->shared, ai->shared_dma);
|
|
iounmap(ai->pciaux);
|
|
iounmap(ai->pcimem);
|
|
mpi_unmap_card(ai->pci);
|
|
}
|
|
err_out_res:
|
|
if (!is_pcmcia)
|
|
release_region( dev->base_addr, 64 );
|
|
err_out_irq:
|
|
free_irq(dev->irq, dev);
|
|
err_out_nets:
|
|
airo_networks_free(ai);
|
|
err_out_thr:
|
|
del_airo_dev(ai);
|
|
set_bit(JOB_DIE, &ai->jobs);
|
|
kthread_stop(ai->airo_thread_task);
|
|
err_out_free:
|
|
free_netdev(dev);
|
|
return NULL;
|
|
}
|
|
|
|
struct net_device *init_airo_card( unsigned short irq, int port, int is_pcmcia,
|
|
struct device *dmdev)
|
|
{
|
|
return _init_airo_card ( irq, port, is_pcmcia, NULL, dmdev);
|
|
}
|
|
|
|
EXPORT_SYMBOL(init_airo_card);
|
|
|
|
static int waitbusy (struct airo_info *ai) {
|
|
int delay = 0;
|
|
while ((IN4500 (ai, COMMAND) & COMMAND_BUSY) & (delay < 10000)) {
|
|
udelay (10);
|
|
if ((++delay % 20) == 0)
|
|
OUT4500(ai, EVACK, EV_CLEARCOMMANDBUSY);
|
|
}
|
|
return delay < 10000;
|
|
}
|
|
|
|
int reset_airo_card( struct net_device *dev )
|
|
{
|
|
int i;
|
|
struct airo_info *ai = dev->priv;
|
|
|
|
if (reset_card (dev, 1))
|
|
return -1;
|
|
|
|
if ( setup_card(ai, dev->dev_addr, 1 ) != SUCCESS ) {
|
|
airo_print_err(dev->name, "MAC could not be enabled");
|
|
return -1;
|
|
}
|
|
airo_print_info(dev->name, "MAC enabled %x:%x:%x:%x:%x:%x",
|
|
dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
|
|
dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
|
|
/* Allocate the transmit buffers if needed */
|
|
if (!test_bit(FLAG_MPI,&ai->flags))
|
|
for( i = 0; i < MAX_FIDS; i++ )
|
|
ai->fids[i] = transmit_allocate (ai,AIRO_DEF_MTU,i>=MAX_FIDS/2);
|
|
|
|
enable_interrupts( ai );
|
|
netif_wake_queue(dev);
|
|
return 0;
|
|
}
|
|
|
|
EXPORT_SYMBOL(reset_airo_card);
|
|
|
|
static void airo_send_event(struct net_device *dev) {
|
|
struct airo_info *ai = dev->priv;
|
|
union iwreq_data wrqu;
|
|
StatusRid status_rid;
|
|
|
|
clear_bit(JOB_EVENT, &ai->jobs);
|
|
PC4500_readrid(ai, RID_STATUS, &status_rid, sizeof(status_rid), 0);
|
|
up(&ai->sem);
|
|
wrqu.data.length = 0;
|
|
wrqu.data.flags = 0;
|
|
memcpy(wrqu.ap_addr.sa_data, status_rid.bssid[0], ETH_ALEN);
|
|
wrqu.ap_addr.sa_family = ARPHRD_ETHER;
|
|
|
|
/* Send event to user space */
|
|
wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
|
|
}
|
|
|
|
static void airo_process_scan_results (struct airo_info *ai) {
|
|
union iwreq_data wrqu;
|
|
BSSListRid bss;
|
|
int rc;
|
|
BSSListElement * loop_net;
|
|
BSSListElement * tmp_net;
|
|
|
|
/* Blow away current list of scan results */
|
|
list_for_each_entry_safe (loop_net, tmp_net, &ai->network_list, list) {
|
|
list_move_tail (&loop_net->list, &ai->network_free_list);
|
|
/* Don't blow away ->list, just BSS data */
|
|
memset (loop_net, 0, sizeof (loop_net->bss));
|
|
}
|
|
|
|
/* Try to read the first entry of the scan result */
|
|
rc = PC4500_readrid(ai, ai->bssListFirst, &bss, ai->bssListRidLen, 0);
|
|
if((rc) || (bss.index == 0xffff)) {
|
|
/* No scan results */
|
|
goto out;
|
|
}
|
|
|
|
/* Read and parse all entries */
|
|
tmp_net = NULL;
|
|
while((!rc) && (bss.index != 0xffff)) {
|
|
/* Grab a network off the free list */
|
|
if (!list_empty(&ai->network_free_list)) {
|
|
tmp_net = list_entry(ai->network_free_list.next,
|
|
BSSListElement, list);
|
|
list_del(ai->network_free_list.next);
|
|
}
|
|
|
|
if (tmp_net != NULL) {
|
|
memcpy(tmp_net, &bss, sizeof(tmp_net->bss));
|
|
list_add_tail(&tmp_net->list, &ai->network_list);
|
|
tmp_net = NULL;
|
|
}
|
|
|
|
/* Read next entry */
|
|
rc = PC4500_readrid(ai, ai->bssListNext,
|
|
&bss, ai->bssListRidLen, 0);
|
|
}
|
|
|
|
out:
|
|
ai->scan_timeout = 0;
|
|
clear_bit(JOB_SCAN_RESULTS, &ai->jobs);
|
|
up(&ai->sem);
|
|
|
|
/* Send an empty event to user space.
|
|
* We don't send the received data on
|
|
* the event because it would require
|
|
* us to do complex transcoding, and
|
|
* we want to minimise the work done in
|
|
* the irq handler. Use a request to
|
|
* extract the data - Jean II */
|
|
wrqu.data.length = 0;
|
|
wrqu.data.flags = 0;
|
|
wireless_send_event(ai->dev, SIOCGIWSCAN, &wrqu, NULL);
|
|
}
|
|
|
|
static int airo_thread(void *data) {
|
|
struct net_device *dev = data;
|
|
struct airo_info *ai = dev->priv;
|
|
int locked;
|
|
|
|
while(1) {
|
|
/* make swsusp happy with our thread */
|
|
try_to_freeze();
|
|
|
|
if (test_bit(JOB_DIE, &ai->jobs))
|
|
break;
|
|
|
|
if (ai->jobs) {
|
|
locked = down_interruptible(&ai->sem);
|
|
} else {
|
|
wait_queue_t wait;
|
|
|
|
init_waitqueue_entry(&wait, current);
|
|
add_wait_queue(&ai->thr_wait, &wait);
|
|
for (;;) {
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
if (ai->jobs)
|
|
break;
|
|
if (ai->expires || ai->scan_timeout) {
|
|
if (ai->scan_timeout &&
|
|
time_after_eq(jiffies,ai->scan_timeout)){
|
|
set_bit(JOB_SCAN_RESULTS, &ai->jobs);
|
|
break;
|
|
} else if (ai->expires &&
|
|
time_after_eq(jiffies,ai->expires)){
|
|
set_bit(JOB_AUTOWEP, &ai->jobs);
|
|
break;
|
|
}
|
|
if (!kthread_should_stop() &&
|
|
!freezing(current)) {
|
|
unsigned long wake_at;
|
|
if (!ai->expires || !ai->scan_timeout) {
|
|
wake_at = max(ai->expires,
|
|
ai->scan_timeout);
|
|
} else {
|
|
wake_at = min(ai->expires,
|
|
ai->scan_timeout);
|
|
}
|
|
schedule_timeout(wake_at - jiffies);
|
|
continue;
|
|
}
|
|
} else if (!kthread_should_stop() &&
|
|
!freezing(current)) {
|
|
schedule();
|
|
continue;
|
|
}
|
|
break;
|
|
}
|
|
current->state = TASK_RUNNING;
|
|
remove_wait_queue(&ai->thr_wait, &wait);
|
|
locked = 1;
|
|
}
|
|
|
|
if (locked)
|
|
continue;
|
|
|
|
if (test_bit(JOB_DIE, &ai->jobs)) {
|
|
up(&ai->sem);
|
|
break;
|
|
}
|
|
|
|
if (ai->power.event || test_bit(FLAG_FLASHING, &ai->flags)) {
|
|
up(&ai->sem);
|
|
continue;
|
|
}
|
|
|
|
if (test_bit(JOB_XMIT, &ai->jobs))
|
|
airo_end_xmit(dev);
|
|
else if (test_bit(JOB_XMIT11, &ai->jobs))
|
|
airo_end_xmit11(dev);
|
|
else if (test_bit(JOB_STATS, &ai->jobs))
|
|
airo_read_stats(ai);
|
|
else if (test_bit(JOB_WSTATS, &ai->jobs))
|
|
airo_read_wireless_stats(ai);
|
|
else if (test_bit(JOB_PROMISC, &ai->jobs))
|
|
airo_set_promisc(ai);
|
|
else if (test_bit(JOB_MIC, &ai->jobs))
|
|
micinit(ai);
|
|
else if (test_bit(JOB_EVENT, &ai->jobs))
|
|
airo_send_event(dev);
|
|
else if (test_bit(JOB_AUTOWEP, &ai->jobs))
|
|
timer_func(dev);
|
|
else if (test_bit(JOB_SCAN_RESULTS, &ai->jobs))
|
|
airo_process_scan_results(ai);
|
|
else /* Shouldn't get here, but we make sure to unlock */
|
|
up(&ai->sem);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t airo_interrupt ( int irq, void* dev_id) {
|
|
struct net_device *dev = (struct net_device *)dev_id;
|
|
u16 status;
|
|
u16 fid;
|
|
struct airo_info *apriv = dev->priv;
|
|
u16 savedInterrupts = 0;
|
|
int handled = 0;
|
|
|
|
if (!netif_device_present(dev))
|
|
return IRQ_NONE;
|
|
|
|
for (;;) {
|
|
status = IN4500( apriv, EVSTAT );
|
|
if ( !(status & STATUS_INTS) || status == 0xffff ) break;
|
|
|
|
handled = 1;
|
|
|
|
if ( status & EV_AWAKE ) {
|
|
OUT4500( apriv, EVACK, EV_AWAKE );
|
|
OUT4500( apriv, EVACK, EV_AWAKE );
|
|
}
|
|
|
|
if (!savedInterrupts) {
|
|
savedInterrupts = IN4500( apriv, EVINTEN );
|
|
OUT4500( apriv, EVINTEN, 0 );
|
|
}
|
|
|
|
if ( status & EV_MIC ) {
|
|
OUT4500( apriv, EVACK, EV_MIC );
|
|
if (test_bit(FLAG_MIC_CAPABLE, &apriv->flags)) {
|
|
set_bit(JOB_MIC, &apriv->jobs);
|
|
wake_up_interruptible(&apriv->thr_wait);
|
|
}
|
|
}
|
|
if ( status & EV_LINK ) {
|
|
union iwreq_data wrqu;
|
|
int scan_forceloss = 0;
|
|
/* The link status has changed, if you want to put a
|
|
monitor hook in, do it here. (Remember that
|
|
interrupts are still disabled!)
|
|
*/
|
|
u16 newStatus = IN4500(apriv, LINKSTAT);
|
|
OUT4500( apriv, EVACK, EV_LINK);
|
|
/* Here is what newStatus means: */
|
|
#define NOBEACON 0x8000 /* Loss of sync - missed beacons */
|
|
#define MAXRETRIES 0x8001 /* Loss of sync - max retries */
|
|
#define MAXARL 0x8002 /* Loss of sync - average retry level exceeded*/
|
|
#define FORCELOSS 0x8003 /* Loss of sync - host request */
|
|
#define TSFSYNC 0x8004 /* Loss of sync - TSF synchronization */
|
|
#define DEAUTH 0x8100 /* Deauthentication (low byte is reason code) */
|
|
#define DISASS 0x8200 /* Disassociation (low byte is reason code) */
|
|
#define ASSFAIL 0x8400 /* Association failure (low byte is reason
|
|
code) */
|
|
#define AUTHFAIL 0x0300 /* Authentication failure (low byte is reason
|
|
code) */
|
|
#define ASSOCIATED 0x0400 /* Associated */
|
|
#define REASSOCIATED 0x0600 /* Reassociated? Only on firmware >= 5.30.17 */
|
|
#define RC_RESERVED 0 /* Reserved return code */
|
|
#define RC_NOREASON 1 /* Unspecified reason */
|
|
#define RC_AUTHINV 2 /* Previous authentication invalid */
|
|
#define RC_DEAUTH 3 /* Deauthenticated because sending station is
|
|
leaving */
|
|
#define RC_NOACT 4 /* Disassociated due to inactivity */
|
|
#define RC_MAXLOAD 5 /* Disassociated because AP is unable to handle
|
|
all currently associated stations */
|
|
#define RC_BADCLASS2 6 /* Class 2 frame received from
|
|
non-Authenticated station */
|
|
#define RC_BADCLASS3 7 /* Class 3 frame received from
|
|
non-Associated station */
|
|
#define RC_STATLEAVE 8 /* Disassociated because sending station is
|
|
leaving BSS */
|
|
#define RC_NOAUTH 9 /* Station requesting (Re)Association is not
|
|
Authenticated with the responding station */
|
|
if (newStatus == FORCELOSS && apriv->scan_timeout > 0)
|
|
scan_forceloss = 1;
|
|
if(newStatus == ASSOCIATED || newStatus == REASSOCIATED) {
|
|
if (auto_wep)
|
|
apriv->expires = 0;
|
|
if (apriv->list_bss_task)
|
|
wake_up_process(apriv->list_bss_task);
|
|
set_bit(FLAG_UPDATE_UNI, &apriv->flags);
|
|
set_bit(FLAG_UPDATE_MULTI, &apriv->flags);
|
|
|
|
if (down_trylock(&apriv->sem) != 0) {
|
|
set_bit(JOB_EVENT, &apriv->jobs);
|
|
wake_up_interruptible(&apriv->thr_wait);
|
|
} else
|
|
airo_send_event(dev);
|
|
} else if (!scan_forceloss) {
|
|
if (auto_wep && !apriv->expires) {
|
|
apriv->expires = RUN_AT(3*HZ);
|
|
wake_up_interruptible(&apriv->thr_wait);
|
|
}
|
|
|
|
/* Send event to user space */
|
|
memset(wrqu.ap_addr.sa_data, '\0', ETH_ALEN);
|
|
wrqu.ap_addr.sa_family = ARPHRD_ETHER;
|
|
wireless_send_event(dev, SIOCGIWAP, &wrqu,NULL);
|
|
}
|
|
}
|
|
|
|
/* Check to see if there is something to receive */
|
|
if ( status & EV_RX ) {
|
|
struct sk_buff *skb = NULL;
|
|
u16 fc, len, hdrlen = 0;
|
|
#pragma pack(1)
|
|
struct {
|
|
u16 status, len;
|
|
u8 rssi[2];
|
|
u8 rate;
|
|
u8 freq;
|
|
u16 tmp[4];
|
|
} hdr;
|
|
#pragma pack()
|
|
u16 gap;
|
|
u16 tmpbuf[4];
|
|
u16 *buffer;
|
|
|
|
if (test_bit(FLAG_MPI,&apriv->flags)) {
|
|
if (test_bit(FLAG_802_11, &apriv->flags))
|
|
mpi_receive_802_11(apriv);
|
|
else
|
|
mpi_receive_802_3(apriv);
|
|
OUT4500(apriv, EVACK, EV_RX);
|
|
goto exitrx;
|
|
}
|
|
|
|
fid = IN4500( apriv, RXFID );
|
|
|
|
/* Get the packet length */
|
|
if (test_bit(FLAG_802_11, &apriv->flags)) {
|
|
bap_setup (apriv, fid, 4, BAP0);
|
|
bap_read (apriv, (u16*)&hdr, sizeof(hdr), BAP0);
|
|
/* Bad CRC. Ignore packet */
|
|
if (le16_to_cpu(hdr.status) & 2)
|
|
hdr.len = 0;
|
|
if (apriv->wifidev == NULL)
|
|
hdr.len = 0;
|
|
} else {
|
|
bap_setup (apriv, fid, 0x36, BAP0);
|
|
bap_read (apriv, (u16*)&hdr.len, 2, BAP0);
|
|
}
|
|
len = le16_to_cpu(hdr.len);
|
|
|
|
if (len > AIRO_DEF_MTU) {
|
|
airo_print_err(apriv->dev->name, "Bad size %d", len);
|
|
goto badrx;
|
|
}
|
|
if (len == 0)
|
|
goto badrx;
|
|
|
|
if (test_bit(FLAG_802_11, &apriv->flags)) {
|
|
bap_read (apriv, (u16*)&fc, sizeof(fc), BAP0);
|
|
fc = le16_to_cpu(fc);
|
|
switch (fc & 0xc) {
|
|
case 4:
|
|
if ((fc & 0xe0) == 0xc0)
|
|
hdrlen = 10;
|
|
else
|
|
hdrlen = 16;
|
|
break;
|
|
case 8:
|
|
if ((fc&0x300)==0x300){
|
|
hdrlen = 30;
|
|
break;
|
|
}
|
|
default:
|
|
hdrlen = 24;
|
|
}
|
|
} else
|
|
hdrlen = ETH_ALEN * 2;
|
|
|
|
skb = dev_alloc_skb( len + hdrlen + 2 + 2 );
|
|
if ( !skb ) {
|
|
apriv->stats.rx_dropped++;
|
|
goto badrx;
|
|
}
|
|
skb_reserve(skb, 2); /* This way the IP header is aligned */
|
|
buffer = (u16*)skb_put (skb, len + hdrlen);
|
|
if (test_bit(FLAG_802_11, &apriv->flags)) {
|
|
buffer[0] = fc;
|
|
bap_read (apriv, buffer + 1, hdrlen - 2, BAP0);
|
|
if (hdrlen == 24)
|
|
bap_read (apriv, tmpbuf, 6, BAP0);
|
|
|
|
bap_read (apriv, &gap, sizeof(gap), BAP0);
|
|
gap = le16_to_cpu(gap);
|
|
if (gap) {
|
|
if (gap <= 8) {
|
|
bap_read (apriv, tmpbuf, gap, BAP0);
|
|
} else {
|
|
airo_print_err(apriv->dev->name, "gaplen too "
|
|
"big. Problems will follow...");
|
|
}
|
|
}
|
|
bap_read (apriv, buffer + hdrlen/2, len, BAP0);
|
|
} else {
|
|
MICBuffer micbuf;
|
|
bap_read (apriv, buffer, ETH_ALEN*2, BAP0);
|
|
if (apriv->micstats.enabled) {
|
|
bap_read (apriv,(u16*)&micbuf,sizeof(micbuf),BAP0);
|
|
if (ntohs(micbuf.typelen) > 0x05DC)
|
|
bap_setup (apriv, fid, 0x44, BAP0);
|
|
else {
|
|
if (len <= sizeof(micbuf))
|
|
goto badmic;
|
|
|
|
len -= sizeof(micbuf);
|
|
skb_trim (skb, len + hdrlen);
|
|
}
|
|
}
|
|
bap_read(apriv,buffer+ETH_ALEN,len,BAP0);
|
|
if (decapsulate(apriv,&micbuf,(etherHead*)buffer,len)) {
|
|
badmic:
|
|
dev_kfree_skb_irq (skb);
|
|
badrx:
|
|
OUT4500( apriv, EVACK, EV_RX);
|
|
goto exitrx;
|
|
}
|
|
}
|
|
#ifdef WIRELESS_SPY
|
|
if (apriv->spy_data.spy_number > 0) {
|
|
char *sa;
|
|
struct iw_quality wstats;
|
|
/* Prepare spy data : addr + qual */
|
|
if (!test_bit(FLAG_802_11, &apriv->flags)) {
|
|
sa = (char*)buffer + 6;
|
|
bap_setup (apriv, fid, 8, BAP0);
|
|
bap_read (apriv, (u16*)hdr.rssi, 2, BAP0);
|
|
} else
|
|
sa = (char*)buffer + 10;
|
|
wstats.qual = hdr.rssi[0];
|
|
if (apriv->rssi)
|
|
wstats.level = 0x100 - apriv->rssi[hdr.rssi[1]].rssidBm;
|
|
else
|
|
wstats.level = (hdr.rssi[1] + 321) / 2;
|
|
wstats.noise = apriv->wstats.qual.noise;
|
|
wstats.updated = IW_QUAL_LEVEL_UPDATED
|
|
| IW_QUAL_QUAL_UPDATED
|
|
| IW_QUAL_DBM;
|
|
/* Update spy records */
|
|
wireless_spy_update(dev, sa, &wstats);
|
|
}
|
|
#endif /* WIRELESS_SPY */
|
|
OUT4500( apriv, EVACK, EV_RX);
|
|
|
|
if (test_bit(FLAG_802_11, &apriv->flags)) {
|
|
skb_reset_mac_header(skb);
|
|
skb->pkt_type = PACKET_OTHERHOST;
|
|
skb->dev = apriv->wifidev;
|
|
skb->protocol = htons(ETH_P_802_2);
|
|
} else
|
|
skb->protocol = eth_type_trans(skb,dev);
|
|
skb->dev->last_rx = jiffies;
|
|
skb->ip_summed = CHECKSUM_NONE;
|
|
|
|
netif_rx( skb );
|
|
}
|
|
exitrx:
|
|
|
|
/* Check to see if a packet has been transmitted */
|
|
if ( status & ( EV_TX|EV_TXCPY|EV_TXEXC ) ) {
|
|
int i;
|
|
int len = 0;
|
|
int index = -1;
|
|
|
|
if (test_bit(FLAG_MPI,&apriv->flags)) {
|
|
unsigned long flags;
|
|
|
|
if (status & EV_TXEXC)
|
|
get_tx_error(apriv, -1);
|
|
spin_lock_irqsave(&apriv->aux_lock, flags);
|
|
if (!skb_queue_empty(&apriv->txq)) {
|
|
spin_unlock_irqrestore(&apriv->aux_lock,flags);
|
|
mpi_send_packet (dev);
|
|
} else {
|
|
clear_bit(FLAG_PENDING_XMIT, &apriv->flags);
|
|
spin_unlock_irqrestore(&apriv->aux_lock,flags);
|
|
netif_wake_queue (dev);
|
|
}
|
|
OUT4500( apriv, EVACK,
|
|
status & (EV_TX|EV_TXCPY|EV_TXEXC));
|
|
goto exittx;
|
|
}
|
|
|
|
fid = IN4500(apriv, TXCOMPLFID);
|
|
|
|
for( i = 0; i < MAX_FIDS; i++ ) {
|
|
if ( ( apriv->fids[i] & 0xffff ) == fid ) {
|
|
len = apriv->fids[i] >> 16;
|
|
index = i;
|
|
}
|
|
}
|
|
if (index != -1) {
|
|
if (status & EV_TXEXC)
|
|
get_tx_error(apriv, index);
|
|
OUT4500( apriv, EVACK, status & (EV_TX | EV_TXEXC));
|
|
/* Set up to be used again */
|
|
apriv->fids[index] &= 0xffff;
|
|
if (index < MAX_FIDS / 2) {
|
|
if (!test_bit(FLAG_PENDING_XMIT, &apriv->flags))
|
|
netif_wake_queue(dev);
|
|
} else {
|
|
if (!test_bit(FLAG_PENDING_XMIT11, &apriv->flags))
|
|
netif_wake_queue(apriv->wifidev);
|
|
}
|
|
} else {
|
|
OUT4500( apriv, EVACK, status & (EV_TX | EV_TXCPY | EV_TXEXC));
|
|
airo_print_err(apriv->dev->name, "Unallocated FID was "
|
|
"used to xmit" );
|
|
}
|
|
}
|
|
exittx:
|
|
if ( status & ~STATUS_INTS & ~IGNORE_INTS )
|
|
airo_print_warn(apriv->dev->name, "Got weird status %x",
|
|
status & ~STATUS_INTS & ~IGNORE_INTS );
|
|
}
|
|
|
|
if (savedInterrupts)
|
|
OUT4500( apriv, EVINTEN, savedInterrupts );
|
|
|
|
/* done.. */
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
/*
|
|
* Routines to talk to the card
|
|
*/
|
|
|
|
/*
|
|
* This was originally written for the 4500, hence the name
|
|
* NOTE: If use with 8bit mode and SMP bad things will happen!
|
|
* Why would some one do 8 bit IO in an SMP machine?!?
|
|
*/
|
|
static void OUT4500( struct airo_info *ai, u16 reg, u16 val ) {
|
|
if (test_bit(FLAG_MPI,&ai->flags))
|
|
reg <<= 1;
|
|
if ( !do8bitIO )
|
|
outw( val, ai->dev->base_addr + reg );
|
|
else {
|
|
outb( val & 0xff, ai->dev->base_addr + reg );
|
|
outb( val >> 8, ai->dev->base_addr + reg + 1 );
|
|
}
|
|
}
|
|
|
|
static u16 IN4500( struct airo_info *ai, u16 reg ) {
|
|
unsigned short rc;
|
|
|
|
if (test_bit(FLAG_MPI,&ai->flags))
|
|
reg <<= 1;
|
|
if ( !do8bitIO )
|
|
rc = inw( ai->dev->base_addr + reg );
|
|
else {
|
|
rc = inb( ai->dev->base_addr + reg );
|
|
rc += ((int)inb( ai->dev->base_addr + reg + 1 )) << 8;
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
static int enable_MAC( struct airo_info *ai, Resp *rsp, int lock ) {
|
|
int rc;
|
|
Cmd cmd;
|
|
|
|
/* FLAG_RADIO_OFF : Radio disabled via /proc or Wireless Extensions
|
|
* FLAG_RADIO_DOWN : Radio disabled via "ifconfig ethX down"
|
|
* Note : we could try to use !netif_running(dev) in enable_MAC()
|
|
* instead of this flag, but I don't trust it *within* the
|
|
* open/close functions, and testing both flags together is
|
|
* "cheaper" - Jean II */
|
|
if (ai->flags & FLAG_RADIO_MASK) return SUCCESS;
|
|
|
|
if (lock && down_interruptible(&ai->sem))
|
|
return -ERESTARTSYS;
|
|
|
|
if (!test_bit(FLAG_ENABLED, &ai->flags)) {
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
cmd.cmd = MAC_ENABLE;
|
|
rc = issuecommand(ai, &cmd, rsp);
|
|
if (rc == SUCCESS)
|
|
set_bit(FLAG_ENABLED, &ai->flags);
|
|
} else
|
|
rc = SUCCESS;
|
|
|
|
if (lock)
|
|
up(&ai->sem);
|
|
|
|
if (rc)
|
|
airo_print_err(ai->dev->name, "%s: Cannot enable MAC, err=%d",
|
|
__FUNCTION__, rc);
|
|
return rc;
|
|
}
|
|
|
|
static void disable_MAC( struct airo_info *ai, int lock ) {
|
|
Cmd cmd;
|
|
Resp rsp;
|
|
|
|
if (lock && down_interruptible(&ai->sem))
|
|
return;
|
|
|
|
if (test_bit(FLAG_ENABLED, &ai->flags)) {
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
cmd.cmd = MAC_DISABLE; // disable in case already enabled
|
|
issuecommand(ai, &cmd, &rsp);
|
|
clear_bit(FLAG_ENABLED, &ai->flags);
|
|
}
|
|
if (lock)
|
|
up(&ai->sem);
|
|
}
|
|
|
|
static void enable_interrupts( struct airo_info *ai ) {
|
|
/* Enable the interrupts */
|
|
OUT4500( ai, EVINTEN, STATUS_INTS );
|
|
}
|
|
|
|
static void disable_interrupts( struct airo_info *ai ) {
|
|
OUT4500( ai, EVINTEN, 0 );
|
|
}
|
|
|
|
static void mpi_receive_802_3(struct airo_info *ai)
|
|
{
|
|
RxFid rxd;
|
|
int len = 0;
|
|
struct sk_buff *skb;
|
|
char *buffer;
|
|
int off = 0;
|
|
MICBuffer micbuf;
|
|
|
|
memcpy_fromio(&rxd, ai->rxfids[0].card_ram_off, sizeof(rxd));
|
|
/* Make sure we got something */
|
|
if (rxd.rdy && rxd.valid == 0) {
|
|
len = rxd.len + 12;
|
|
if (len < 12 || len > 2048)
|
|
goto badrx;
|
|
|
|
skb = dev_alloc_skb(len);
|
|
if (!skb) {
|
|
ai->stats.rx_dropped++;
|
|
goto badrx;
|
|
}
|
|
buffer = skb_put(skb,len);
|
|
memcpy(buffer, ai->rxfids[0].virtual_host_addr, ETH_ALEN * 2);
|
|
if (ai->micstats.enabled) {
|
|
memcpy(&micbuf,
|
|
ai->rxfids[0].virtual_host_addr + ETH_ALEN * 2,
|
|
sizeof(micbuf));
|
|
if (ntohs(micbuf.typelen) <= 0x05DC) {
|
|
if (len <= sizeof(micbuf) + ETH_ALEN * 2)
|
|
goto badmic;
|
|
|
|
off = sizeof(micbuf);
|
|
skb_trim (skb, len - off);
|
|
}
|
|
}
|
|
memcpy(buffer + ETH_ALEN * 2,
|
|
ai->rxfids[0].virtual_host_addr + ETH_ALEN * 2 + off,
|
|
len - ETH_ALEN * 2 - off);
|
|
if (decapsulate (ai, &micbuf, (etherHead*)buffer, len - off - ETH_ALEN * 2)) {
|
|
badmic:
|
|
dev_kfree_skb_irq (skb);
|
|
goto badrx;
|
|
}
|
|
#ifdef WIRELESS_SPY
|
|
if (ai->spy_data.spy_number > 0) {
|
|
char *sa;
|
|
struct iw_quality wstats;
|
|
/* Prepare spy data : addr + qual */
|
|
sa = buffer + ETH_ALEN;
|
|
wstats.qual = 0; /* XXX Where do I get that info from ??? */
|
|
wstats.level = 0;
|
|
wstats.updated = 0;
|
|
/* Update spy records */
|
|
wireless_spy_update(ai->dev, sa, &wstats);
|
|
}
|
|
#endif /* WIRELESS_SPY */
|
|
|
|
skb->ip_summed = CHECKSUM_NONE;
|
|
skb->protocol = eth_type_trans(skb, ai->dev);
|
|
skb->dev->last_rx = jiffies;
|
|
netif_rx(skb);
|
|
}
|
|
badrx:
|
|
if (rxd.valid == 0) {
|
|
rxd.valid = 1;
|
|
rxd.rdy = 0;
|
|
rxd.len = PKTSIZE;
|
|
memcpy_toio(ai->rxfids[0].card_ram_off, &rxd, sizeof(rxd));
|
|
}
|
|
}
|
|
|
|
void mpi_receive_802_11 (struct airo_info *ai)
|
|
{
|
|
RxFid rxd;
|
|
struct sk_buff *skb = NULL;
|
|
u16 fc, len, hdrlen = 0;
|
|
#pragma pack(1)
|
|
struct {
|
|
u16 status, len;
|
|
u8 rssi[2];
|
|
u8 rate;
|
|
u8 freq;
|
|
u16 tmp[4];
|
|
} hdr;
|
|
#pragma pack()
|
|
u16 gap;
|
|
u16 *buffer;
|
|
char *ptr = ai->rxfids[0].virtual_host_addr+4;
|
|
|
|
memcpy_fromio(&rxd, ai->rxfids[0].card_ram_off, sizeof(rxd));
|
|
memcpy ((char *)&hdr, ptr, sizeof(hdr));
|
|
ptr += sizeof(hdr);
|
|
/* Bad CRC. Ignore packet */
|
|
if (le16_to_cpu(hdr.status) & 2)
|
|
hdr.len = 0;
|
|
if (ai->wifidev == NULL)
|
|
hdr.len = 0;
|
|
len = le16_to_cpu(hdr.len);
|
|
if (len > AIRO_DEF_MTU) {
|
|
airo_print_err(ai->dev->name, "Bad size %d", len);
|
|
goto badrx;
|
|
}
|
|
if (len == 0)
|
|
goto badrx;
|
|
|
|
memcpy ((char *)&fc, ptr, sizeof(fc));
|
|
fc = le16_to_cpu(fc);
|
|
switch (fc & 0xc) {
|
|
case 4:
|
|
if ((fc & 0xe0) == 0xc0)
|
|
hdrlen = 10;
|
|
else
|
|
hdrlen = 16;
|
|
break;
|
|
case 8:
|
|
if ((fc&0x300)==0x300){
|
|
hdrlen = 30;
|
|
break;
|
|
}
|
|
default:
|
|
hdrlen = 24;
|
|
}
|
|
|
|
skb = dev_alloc_skb( len + hdrlen + 2 );
|
|
if ( !skb ) {
|
|
ai->stats.rx_dropped++;
|
|
goto badrx;
|
|
}
|
|
buffer = (u16*)skb_put (skb, len + hdrlen);
|
|
memcpy ((char *)buffer, ptr, hdrlen);
|
|
ptr += hdrlen;
|
|
if (hdrlen == 24)
|
|
ptr += 6;
|
|
memcpy ((char *)&gap, ptr, sizeof(gap));
|
|
ptr += sizeof(gap);
|
|
gap = le16_to_cpu(gap);
|
|
if (gap) {
|
|
if (gap <= 8)
|
|
ptr += gap;
|
|
else
|
|
airo_print_err(ai->dev->name,
|
|
"gaplen too big. Problems will follow...");
|
|
}
|
|
memcpy ((char *)buffer + hdrlen, ptr, len);
|
|
ptr += len;
|
|
#ifdef IW_WIRELESS_SPY /* defined in iw_handler.h */
|
|
if (ai->spy_data.spy_number > 0) {
|
|
char *sa;
|
|
struct iw_quality wstats;
|
|
/* Prepare spy data : addr + qual */
|
|
sa = (char*)buffer + 10;
|
|
wstats.qual = hdr.rssi[0];
|
|
if (ai->rssi)
|
|
wstats.level = 0x100 - ai->rssi[hdr.rssi[1]].rssidBm;
|
|
else
|
|
wstats.level = (hdr.rssi[1] + 321) / 2;
|
|
wstats.noise = ai->wstats.qual.noise;
|
|
wstats.updated = IW_QUAL_QUAL_UPDATED
|
|
| IW_QUAL_LEVEL_UPDATED
|
|
| IW_QUAL_DBM;
|
|
/* Update spy records */
|
|
wireless_spy_update(ai->dev, sa, &wstats);
|
|
}
|
|
#endif /* IW_WIRELESS_SPY */
|
|
skb_reset_mac_header(skb);
|
|
skb->pkt_type = PACKET_OTHERHOST;
|
|
skb->dev = ai->wifidev;
|
|
skb->protocol = htons(ETH_P_802_2);
|
|
skb->dev->last_rx = jiffies;
|
|
skb->ip_summed = CHECKSUM_NONE;
|
|
netif_rx( skb );
|
|
badrx:
|
|
if (rxd.valid == 0) {
|
|
rxd.valid = 1;
|
|
rxd.rdy = 0;
|
|
rxd.len = PKTSIZE;
|
|
memcpy_toio(ai->rxfids[0].card_ram_off, &rxd, sizeof(rxd));
|
|
}
|
|
}
|
|
|
|
static u16 setup_card(struct airo_info *ai, u8 *mac, int lock)
|
|
{
|
|
Cmd cmd;
|
|
Resp rsp;
|
|
int status;
|
|
int i;
|
|
SsidRid mySsid;
|
|
u16 lastindex;
|
|
WepKeyRid wkr;
|
|
int rc;
|
|
|
|
memset( &mySsid, 0, sizeof( mySsid ) );
|
|
kfree (ai->flash);
|
|
ai->flash = NULL;
|
|
|
|
/* The NOP is the first step in getting the card going */
|
|
cmd.cmd = NOP;
|
|
cmd.parm0 = cmd.parm1 = cmd.parm2 = 0;
|
|
if (lock && down_interruptible(&ai->sem))
|
|
return ERROR;
|
|
if ( issuecommand( ai, &cmd, &rsp ) != SUCCESS ) {
|
|
if (lock)
|
|
up(&ai->sem);
|
|
return ERROR;
|
|
}
|
|
disable_MAC( ai, 0);
|
|
|
|
// Let's figure out if we need to use the AUX port
|
|
if (!test_bit(FLAG_MPI,&ai->flags)) {
|
|
cmd.cmd = CMD_ENABLEAUX;
|
|
if (issuecommand(ai, &cmd, &rsp) != SUCCESS) {
|
|
if (lock)
|
|
up(&ai->sem);
|
|
airo_print_err(ai->dev->name, "Error checking for AUX port");
|
|
return ERROR;
|
|
}
|
|
if (!aux_bap || rsp.status & 0xff00) {
|
|
ai->bap_read = fast_bap_read;
|
|
airo_print_dbg(ai->dev->name, "Doing fast bap_reads");
|
|
} else {
|
|
ai->bap_read = aux_bap_read;
|
|
airo_print_dbg(ai->dev->name, "Doing AUX bap_reads");
|
|
}
|
|
}
|
|
if (lock)
|
|
up(&ai->sem);
|
|
if (ai->config.len == 0) {
|
|
tdsRssiRid rssi_rid;
|
|
CapabilityRid cap_rid;
|
|
|
|
kfree(ai->APList);
|
|
ai->APList = NULL;
|
|
kfree(ai->SSID);
|
|
ai->SSID = NULL;
|
|
// general configuration (read/modify/write)
|
|
status = readConfigRid(ai, lock);
|
|
if ( status != SUCCESS ) return ERROR;
|
|
|
|
status = readCapabilityRid(ai, &cap_rid, lock);
|
|
if ( status != SUCCESS ) return ERROR;
|
|
|
|
status = PC4500_readrid(ai,RID_RSSI,&rssi_rid,sizeof(rssi_rid),lock);
|
|
if ( status == SUCCESS ) {
|
|
if (ai->rssi || (ai->rssi = kmalloc(512, GFP_KERNEL)) != NULL)
|
|
memcpy(ai->rssi, (u8*)&rssi_rid + 2, 512); /* Skip RID length member */
|
|
}
|
|
else {
|
|
kfree(ai->rssi);
|
|
ai->rssi = NULL;
|
|
if (cap_rid.softCap & 8)
|
|
ai->config.rmode |= RXMODE_NORMALIZED_RSSI;
|
|
else
|
|
airo_print_warn(ai->dev->name, "unknown received signal "
|
|
"level scale");
|
|
}
|
|
ai->config.opmode = adhoc ? MODE_STA_IBSS : MODE_STA_ESS;
|
|
ai->config.authType = AUTH_OPEN;
|
|
ai->config.modulation = MOD_CCK;
|
|
|
|
if ((cap_rid.len>=sizeof(cap_rid)) && (cap_rid.extSoftCap&1) &&
|
|
(micsetup(ai) == SUCCESS)) {
|
|
ai->config.opmode |= MODE_MIC;
|
|
set_bit(FLAG_MIC_CAPABLE, &ai->flags);
|
|
}
|
|
|
|
/* Save off the MAC */
|
|
for( i = 0; i < ETH_ALEN; i++ ) {
|
|
mac[i] = ai->config.macAddr[i];
|
|
}
|
|
|
|
/* Check to see if there are any insmod configured
|
|
rates to add */
|
|
if ( rates[0] ) {
|
|
int i = 0;
|
|
memset(ai->config.rates,0,sizeof(ai->config.rates));
|
|
for( i = 0; i < 8 && rates[i]; i++ ) {
|
|
ai->config.rates[i] = rates[i];
|
|
}
|
|
}
|
|
if ( basic_rate > 0 ) {
|
|
int i;
|
|
for( i = 0; i < 8; i++ ) {
|
|
if ( ai->config.rates[i] == basic_rate ||
|
|
!ai->config.rates ) {
|
|
ai->config.rates[i] = basic_rate | 0x80;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
set_bit (FLAG_COMMIT, &ai->flags);
|
|
}
|
|
|
|
/* Setup the SSIDs if present */
|
|
if ( ssids[0] ) {
|
|
int i;
|
|
for( i = 0; i < 3 && ssids[i]; i++ ) {
|
|
mySsid.ssids[i].len = strlen(ssids[i]);
|
|
if ( mySsid.ssids[i].len > 32 )
|
|
mySsid.ssids[i].len = 32;
|
|
memcpy(mySsid.ssids[i].ssid, ssids[i],
|
|
mySsid.ssids[i].len);
|
|
}
|
|
mySsid.len = sizeof(mySsid);
|
|
}
|
|
|
|
status = writeConfigRid(ai, lock);
|
|
if ( status != SUCCESS ) return ERROR;
|
|
|
|
/* Set up the SSID list */
|
|
if ( ssids[0] ) {
|
|
status = writeSsidRid(ai, &mySsid, lock);
|
|
if ( status != SUCCESS ) return ERROR;
|
|
}
|
|
|
|
status = enable_MAC(ai, &rsp, lock);
|
|
if ( status != SUCCESS || (rsp.status & 0xFF00) != 0) {
|
|
airo_print_err(ai->dev->name, "Bad MAC enable reason = %x, rid = %x,"
|
|
" offset = %d", rsp.rsp0, rsp.rsp1, rsp.rsp2 );
|
|
return ERROR;
|
|
}
|
|
|
|
/* Grab the initial wep key, we gotta save it for auto_wep */
|
|
rc = readWepKeyRid(ai, &wkr, 1, lock);
|
|
if (rc == SUCCESS) do {
|
|
lastindex = wkr.kindex;
|
|
if (wkr.kindex == 0xffff) {
|
|
ai->defindex = wkr.mac[0];
|
|
}
|
|
rc = readWepKeyRid(ai, &wkr, 0, lock);
|
|
} while(lastindex != wkr.kindex);
|
|
|
|
if (auto_wep) {
|
|
ai->expires = RUN_AT(3*HZ);
|
|
wake_up_interruptible(&ai->thr_wait);
|
|
}
|
|
|
|
return SUCCESS;
|
|
}
|
|
|
|
static u16 issuecommand(struct airo_info *ai, Cmd *pCmd, Resp *pRsp) {
|
|
// Im really paranoid about letting it run forever!
|
|
int max_tries = 600000;
|
|
|
|
if (IN4500(ai, EVSTAT) & EV_CMD)
|
|
OUT4500(ai, EVACK, EV_CMD);
|
|
|
|
OUT4500(ai, PARAM0, pCmd->parm0);
|
|
OUT4500(ai, PARAM1, pCmd->parm1);
|
|
OUT4500(ai, PARAM2, pCmd->parm2);
|
|
OUT4500(ai, COMMAND, pCmd->cmd);
|
|
|
|
while (max_tries-- && (IN4500(ai, EVSTAT) & EV_CMD) == 0) {
|
|
if ((IN4500(ai, COMMAND)) == pCmd->cmd)
|
|
// PC4500 didn't notice command, try again
|
|
OUT4500(ai, COMMAND, pCmd->cmd);
|
|
if (!in_atomic() && (max_tries & 255) == 0)
|
|
schedule();
|
|
}
|
|
|
|
if ( max_tries == -1 ) {
|
|
airo_print_err(ai->dev->name,
|
|
"Max tries exceeded when issueing command");
|
|
if (IN4500(ai, COMMAND) & COMMAND_BUSY)
|
|
OUT4500(ai, EVACK, EV_CLEARCOMMANDBUSY);
|
|
return ERROR;
|
|
}
|
|
|
|
// command completed
|
|
pRsp->status = IN4500(ai, STATUS);
|
|
pRsp->rsp0 = IN4500(ai, RESP0);
|
|
pRsp->rsp1 = IN4500(ai, RESP1);
|
|
pRsp->rsp2 = IN4500(ai, RESP2);
|
|
if ((pRsp->status & 0xff00)!=0 && pCmd->cmd != CMD_SOFTRESET)
|
|
airo_print_err(ai->dev->name,
|
|
"cmd:%x status:%x rsp0:%x rsp1:%x rsp2:%x",
|
|
pCmd->cmd, pRsp->status, pRsp->rsp0, pRsp->rsp1,
|
|
pRsp->rsp2);
|
|
|
|
// clear stuck command busy if necessary
|
|
if (IN4500(ai, COMMAND) & COMMAND_BUSY) {
|
|
OUT4500(ai, EVACK, EV_CLEARCOMMANDBUSY);
|
|
}
|
|
// acknowledge processing the status/response
|
|
OUT4500(ai, EVACK, EV_CMD);
|
|
|
|
return SUCCESS;
|
|
}
|
|
|
|
/* Sets up the bap to start exchange data. whichbap should
|
|
* be one of the BAP0 or BAP1 defines. Locks should be held before
|
|
* calling! */
|
|
static int bap_setup(struct airo_info *ai, u16 rid, u16 offset, int whichbap )
|
|
{
|
|
int timeout = 50;
|
|
int max_tries = 3;
|
|
|
|
OUT4500(ai, SELECT0+whichbap, rid);
|
|
OUT4500(ai, OFFSET0+whichbap, offset);
|
|
while (1) {
|
|
int status = IN4500(ai, OFFSET0+whichbap);
|
|
if (status & BAP_BUSY) {
|
|
/* This isn't really a timeout, but its kinda
|
|
close */
|
|
if (timeout--) {
|
|
continue;
|
|
}
|
|
} else if ( status & BAP_ERR ) {
|
|
/* invalid rid or offset */
|
|
airo_print_err(ai->dev->name, "BAP error %x %d",
|
|
status, whichbap );
|
|
return ERROR;
|
|
} else if (status & BAP_DONE) { // success
|
|
return SUCCESS;
|
|
}
|
|
if ( !(max_tries--) ) {
|
|
airo_print_err(ai->dev->name,
|
|
"airo: BAP setup error too many retries\n");
|
|
return ERROR;
|
|
}
|
|
// -- PC4500 missed it, try again
|
|
OUT4500(ai, SELECT0+whichbap, rid);
|
|
OUT4500(ai, OFFSET0+whichbap, offset);
|
|
timeout = 50;
|
|
}
|
|
}
|
|
|
|
/* should only be called by aux_bap_read. This aux function and the
|
|
following use concepts not documented in the developers guide. I
|
|
got them from a patch given to my by Aironet */
|
|
static u16 aux_setup(struct airo_info *ai, u16 page,
|
|
u16 offset, u16 *len)
|
|
{
|
|
u16 next;
|
|
|
|
OUT4500(ai, AUXPAGE, page);
|
|
OUT4500(ai, AUXOFF, 0);
|
|
next = IN4500(ai, AUXDATA);
|
|
*len = IN4500(ai, AUXDATA)&0xff;
|
|
if (offset != 4) OUT4500(ai, AUXOFF, offset);
|
|
return next;
|
|
}
|
|
|
|
/* requires call to bap_setup() first */
|
|
static int aux_bap_read(struct airo_info *ai, u16 *pu16Dst,
|
|
int bytelen, int whichbap)
|
|
{
|
|
u16 len;
|
|
u16 page;
|
|
u16 offset;
|
|
u16 next;
|
|
int words;
|
|
int i;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ai->aux_lock, flags);
|
|
page = IN4500(ai, SWS0+whichbap);
|
|
offset = IN4500(ai, SWS2+whichbap);
|
|
next = aux_setup(ai, page, offset, &len);
|
|
words = (bytelen+1)>>1;
|
|
|
|
for (i=0; i<words;) {
|
|
int count;
|
|
count = (len>>1) < (words-i) ? (len>>1) : (words-i);
|
|
if ( !do8bitIO )
|
|
insw( ai->dev->base_addr+DATA0+whichbap,
|
|
pu16Dst+i,count );
|
|
else
|
|
insb( ai->dev->base_addr+DATA0+whichbap,
|
|
pu16Dst+i, count << 1 );
|
|
i += count;
|
|
if (i<words) {
|
|
next = aux_setup(ai, next, 4, &len);
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&ai->aux_lock, flags);
|
|
return SUCCESS;
|
|
}
|
|
|
|
|
|
/* requires call to bap_setup() first */
|
|
static int fast_bap_read(struct airo_info *ai, u16 *pu16Dst,
|
|
int bytelen, int whichbap)
|
|
{
|
|
bytelen = (bytelen + 1) & (~1); // round up to even value
|
|
if ( !do8bitIO )
|
|
insw( ai->dev->base_addr+DATA0+whichbap, pu16Dst, bytelen>>1 );
|
|
else
|
|
insb( ai->dev->base_addr+DATA0+whichbap, pu16Dst, bytelen );
|
|
return SUCCESS;
|
|
}
|
|
|
|
/* requires call to bap_setup() first */
|
|
static int bap_write(struct airo_info *ai, const u16 *pu16Src,
|
|
int bytelen, int whichbap)
|
|
{
|
|
bytelen = (bytelen + 1) & (~1); // round up to even value
|
|
if ( !do8bitIO )
|
|
outsw( ai->dev->base_addr+DATA0+whichbap,
|
|
pu16Src, bytelen>>1 );
|
|
else
|
|
outsb( ai->dev->base_addr+DATA0+whichbap, pu16Src, bytelen );
|
|
return SUCCESS;
|
|
}
|
|
|
|
static int PC4500_accessrid(struct airo_info *ai, u16 rid, u16 accmd)
|
|
{
|
|
Cmd cmd; /* for issuing commands */
|
|
Resp rsp; /* response from commands */
|
|
u16 status;
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
cmd.cmd = accmd;
|
|
cmd.parm0 = rid;
|
|
status = issuecommand(ai, &cmd, &rsp);
|
|
if (status != 0) return status;
|
|
if ( (rsp.status & 0x7F00) != 0) {
|
|
return (accmd << 8) + (rsp.rsp0 & 0xFF);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Note, that we are using BAP1 which is also used by transmit, so
|
|
* we must get a lock. */
|
|
static int PC4500_readrid(struct airo_info *ai, u16 rid, void *pBuf, int len, int lock)
|
|
{
|
|
u16 status;
|
|
int rc = SUCCESS;
|
|
|
|
if (lock) {
|
|
if (down_interruptible(&ai->sem))
|
|
return ERROR;
|
|
}
|
|
if (test_bit(FLAG_MPI,&ai->flags)) {
|
|
Cmd cmd;
|
|
Resp rsp;
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
memset(&rsp, 0, sizeof(rsp));
|
|
ai->config_desc.rid_desc.valid = 1;
|
|
ai->config_desc.rid_desc.len = RIDSIZE;
|
|
ai->config_desc.rid_desc.rid = 0;
|
|
ai->config_desc.rid_desc.host_addr = ai->ridbus;
|
|
|
|
cmd.cmd = CMD_ACCESS;
|
|
cmd.parm0 = rid;
|
|
|
|
memcpy_toio(ai->config_desc.card_ram_off,
|
|
&ai->config_desc.rid_desc, sizeof(Rid));
|
|
|
|
rc = issuecommand(ai, &cmd, &rsp);
|
|
|
|
if (rsp.status & 0x7f00)
|
|
rc = rsp.rsp0;
|
|
if (!rc)
|
|
memcpy(pBuf, ai->config_desc.virtual_host_addr, len);
|
|
goto done;
|
|
} else {
|
|
if ((status = PC4500_accessrid(ai, rid, CMD_ACCESS))!=SUCCESS) {
|
|
rc = status;
|
|
goto done;
|
|
}
|
|
if (bap_setup(ai, rid, 0, BAP1) != SUCCESS) {
|
|
rc = ERROR;
|
|
goto done;
|
|
}
|
|
// read the rid length field
|
|
bap_read(ai, pBuf, 2, BAP1);
|
|
// length for remaining part of rid
|
|
len = min(len, (int)le16_to_cpu(*(u16*)pBuf)) - 2;
|
|
|
|
if ( len <= 2 ) {
|
|
airo_print_err(ai->dev->name,
|
|
"Rid %x has a length of %d which is too short",
|
|
(int)rid, (int)len );
|
|
rc = ERROR;
|
|
goto done;
|
|
}
|
|
// read remainder of the rid
|
|
rc = bap_read(ai, ((u16*)pBuf)+1, len, BAP1);
|
|
}
|
|
done:
|
|
if (lock)
|
|
up(&ai->sem);
|
|
return rc;
|
|
}
|
|
|
|
/* Note, that we are using BAP1 which is also used by transmit, so
|
|
* make sure this isnt called when a transmit is happening */
|
|
static int PC4500_writerid(struct airo_info *ai, u16 rid,
|
|
const void *pBuf, int len, int lock)
|
|
{
|
|
u16 status;
|
|
int rc = SUCCESS;
|
|
|
|
*(u16*)pBuf = cpu_to_le16((u16)len);
|
|
|
|
if (lock) {
|
|
if (down_interruptible(&ai->sem))
|
|
return ERROR;
|
|
}
|
|
if (test_bit(FLAG_MPI,&ai->flags)) {
|
|
Cmd cmd;
|
|
Resp rsp;
|
|
|
|
if (test_bit(FLAG_ENABLED, &ai->flags) && (RID_WEP_TEMP != rid))
|
|
airo_print_err(ai->dev->name,
|
|
"%s: MAC should be disabled (rid=%04x)",
|
|
__FUNCTION__, rid);
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
memset(&rsp, 0, sizeof(rsp));
|
|
|
|
ai->config_desc.rid_desc.valid = 1;
|
|
ai->config_desc.rid_desc.len = *((u16 *)pBuf);
|
|
ai->config_desc.rid_desc.rid = 0;
|
|
|
|
cmd.cmd = CMD_WRITERID;
|
|
cmd.parm0 = rid;
|
|
|
|
memcpy_toio(ai->config_desc.card_ram_off,
|
|
&ai->config_desc.rid_desc, sizeof(Rid));
|
|
|
|
if (len < 4 || len > 2047) {
|
|
airo_print_err(ai->dev->name, "%s: len=%d", __FUNCTION__, len);
|
|
rc = -1;
|
|
} else {
|
|
memcpy((char *)ai->config_desc.virtual_host_addr,
|
|
pBuf, len);
|
|
|
|
rc = issuecommand(ai, &cmd, &rsp);
|
|
if ((rc & 0xff00) != 0) {
|
|
airo_print_err(ai->dev->name, "%s: Write rid Error %d",
|
|
__FUNCTION__, rc);
|
|
airo_print_err(ai->dev->name, "%s: Cmd=%04x",
|
|
__FUNCTION__, cmd.cmd);
|
|
}
|
|
|
|
if ((rsp.status & 0x7f00))
|
|
rc = rsp.rsp0;
|
|
}
|
|
} else {
|
|
// --- first access so that we can write the rid data
|
|
if ( (status = PC4500_accessrid(ai, rid, CMD_ACCESS)) != 0) {
|
|
rc = status;
|
|
goto done;
|
|
}
|
|
// --- now write the rid data
|
|
if (bap_setup(ai, rid, 0, BAP1) != SUCCESS) {
|
|
rc = ERROR;
|
|
goto done;
|
|
}
|
|
bap_write(ai, pBuf, len, BAP1);
|
|
// ---now commit the rid data
|
|
rc = PC4500_accessrid(ai, rid, 0x100|CMD_ACCESS);
|
|
}
|
|
done:
|
|
if (lock)
|
|
up(&ai->sem);
|
|
return rc;
|
|
}
|
|
|
|
/* Allocates a FID to be used for transmitting packets. We only use
|
|
one for now. */
|
|
static u16 transmit_allocate(struct airo_info *ai, int lenPayload, int raw)
|
|
{
|
|
unsigned int loop = 3000;
|
|
Cmd cmd;
|
|
Resp rsp;
|
|
u16 txFid;
|
|
u16 txControl;
|
|
|
|
cmd.cmd = CMD_ALLOCATETX;
|
|
cmd.parm0 = lenPayload;
|
|
if (down_interruptible(&ai->sem))
|
|
return ERROR;
|
|
if (issuecommand(ai, &cmd, &rsp) != SUCCESS) {
|
|
txFid = ERROR;
|
|
goto done;
|
|
}
|
|
if ( (rsp.status & 0xFF00) != 0) {
|
|
txFid = ERROR;
|
|
goto done;
|
|
}
|
|
/* wait for the allocate event/indication
|
|
* It makes me kind of nervous that this can just sit here and spin,
|
|
* but in practice it only loops like four times. */
|
|
while (((IN4500(ai, EVSTAT) & EV_ALLOC) == 0) && --loop);
|
|
if (!loop) {
|
|
txFid = ERROR;
|
|
goto done;
|
|
}
|
|
|
|
// get the allocated fid and acknowledge
|
|
txFid = IN4500(ai, TXALLOCFID);
|
|
OUT4500(ai, EVACK, EV_ALLOC);
|
|
|
|
/* The CARD is pretty cool since it converts the ethernet packet
|
|
* into 802.11. Also note that we don't release the FID since we
|
|
* will be using the same one over and over again. */
|
|
/* We only have to setup the control once since we are not
|
|
* releasing the fid. */
|
|
if (raw)
|
|
txControl = cpu_to_le16(TXCTL_TXOK | TXCTL_TXEX | TXCTL_802_11
|
|
| TXCTL_ETHERNET | TXCTL_NORELEASE);
|
|
else
|
|
txControl = cpu_to_le16(TXCTL_TXOK | TXCTL_TXEX | TXCTL_802_3
|
|
| TXCTL_ETHERNET | TXCTL_NORELEASE);
|
|
if (bap_setup(ai, txFid, 0x0008, BAP1) != SUCCESS)
|
|
txFid = ERROR;
|
|
else
|
|
bap_write(ai, &txControl, sizeof(txControl), BAP1);
|
|
|
|
done:
|
|
up(&ai->sem);
|
|
|
|
return txFid;
|
|
}
|
|
|
|
/* In general BAP1 is dedicated to transmiting packets. However,
|
|
since we need a BAP when accessing RIDs, we also use BAP1 for that.
|
|
Make sure the BAP1 spinlock is held when this is called. */
|
|
static int transmit_802_3_packet(struct airo_info *ai, int len, char *pPacket)
|
|
{
|
|
u16 payloadLen;
|
|
Cmd cmd;
|
|
Resp rsp;
|
|
int miclen = 0;
|
|
u16 txFid = len;
|
|
MICBuffer pMic;
|
|
|
|
len >>= 16;
|
|
|
|
if (len <= ETH_ALEN * 2) {
|
|
airo_print_warn(ai->dev->name, "Short packet %d", len);
|
|
return ERROR;
|
|
}
|
|
len -= ETH_ALEN * 2;
|
|
|
|
if (test_bit(FLAG_MIC_CAPABLE, &ai->flags) && ai->micstats.enabled &&
|
|
(ntohs(((u16 *)pPacket)[6]) != 0x888E)) {
|
|
if (encapsulate(ai,(etherHead *)pPacket,&pMic,len) != SUCCESS)
|
|
return ERROR;
|
|
miclen = sizeof(pMic);
|
|
}
|
|
// packet is destination[6], source[6], payload[len-12]
|
|
// write the payload length and dst/src/payload
|
|
if (bap_setup(ai, txFid, 0x0036, BAP1) != SUCCESS) return ERROR;
|
|
/* The hardware addresses aren't counted as part of the payload, so
|
|
* we have to subtract the 12 bytes for the addresses off */
|
|
payloadLen = cpu_to_le16(len + miclen);
|
|
bap_write(ai, &payloadLen, sizeof(payloadLen),BAP1);
|
|
bap_write(ai, (const u16*)pPacket, sizeof(etherHead), BAP1);
|
|
if (miclen)
|
|
bap_write(ai, (const u16*)&pMic, miclen, BAP1);
|
|
bap_write(ai, (const u16*)(pPacket + sizeof(etherHead)), len, BAP1);
|
|
// issue the transmit command
|
|
memset( &cmd, 0, sizeof( cmd ) );
|
|
cmd.cmd = CMD_TRANSMIT;
|
|
cmd.parm0 = txFid;
|
|
if (issuecommand(ai, &cmd, &rsp) != SUCCESS) return ERROR;
|
|
if ( (rsp.status & 0xFF00) != 0) return ERROR;
|
|
return SUCCESS;
|
|
}
|
|
|
|
static int transmit_802_11_packet(struct airo_info *ai, int len, char *pPacket)
|
|
{
|
|
u16 fc, payloadLen;
|
|
Cmd cmd;
|
|
Resp rsp;
|
|
int hdrlen;
|
|
struct {
|
|
u8 addr4[ETH_ALEN];
|
|
u16 gaplen;
|
|
u8 gap[6];
|
|
} gap;
|
|
u16 txFid = len;
|
|
len >>= 16;
|
|
gap.gaplen = 6;
|
|
|
|
fc = le16_to_cpu(*(const u16*)pPacket);
|
|
switch (fc & 0xc) {
|
|
case 4:
|
|
if ((fc & 0xe0) == 0xc0)
|
|
hdrlen = 10;
|
|
else
|
|
hdrlen = 16;
|
|
break;
|
|
case 8:
|
|
if ((fc&0x300)==0x300){
|
|
hdrlen = 30;
|
|
break;
|
|
}
|
|
default:
|
|
hdrlen = 24;
|
|
}
|
|
|
|
if (len < hdrlen) {
|
|
airo_print_warn(ai->dev->name, "Short packet %d", len);
|
|
return ERROR;
|
|
}
|
|
|
|
/* packet is 802.11 header + payload
|
|
* write the payload length and dst/src/payload */
|
|
if (bap_setup(ai, txFid, 6, BAP1) != SUCCESS) return ERROR;
|
|
/* The 802.11 header aren't counted as part of the payload, so
|
|
* we have to subtract the header bytes off */
|
|
payloadLen = cpu_to_le16(len-hdrlen);
|
|
bap_write(ai, &payloadLen, sizeof(payloadLen),BAP1);
|
|
if (bap_setup(ai, txFid, 0x0014, BAP1) != SUCCESS) return ERROR;
|
|
bap_write(ai, (const u16*)pPacket, hdrlen, BAP1);
|
|
bap_write(ai, hdrlen == 30 ?
|
|
(const u16*)&gap.gaplen : (const u16*)&gap, 38 - hdrlen, BAP1);
|
|
|
|
bap_write(ai, (const u16*)(pPacket + hdrlen), len - hdrlen, BAP1);
|
|
// issue the transmit command
|
|
memset( &cmd, 0, sizeof( cmd ) );
|
|
cmd.cmd = CMD_TRANSMIT;
|
|
cmd.parm0 = txFid;
|
|
if (issuecommand(ai, &cmd, &rsp) != SUCCESS) return ERROR;
|
|
if ( (rsp.status & 0xFF00) != 0) return ERROR;
|
|
return SUCCESS;
|
|
}
|
|
|
|
/*
|
|
* This is the proc_fs routines. It is a bit messier than I would
|
|
* like! Feel free to clean it up!
|
|
*/
|
|
|
|
static ssize_t proc_read( struct file *file,
|
|
char __user *buffer,
|
|
size_t len,
|
|
loff_t *offset);
|
|
|
|
static ssize_t proc_write( struct file *file,
|
|
const char __user *buffer,
|
|
size_t len,
|
|
loff_t *offset );
|
|
static int proc_close( struct inode *inode, struct file *file );
|
|
|
|
static int proc_stats_open( struct inode *inode, struct file *file );
|
|
static int proc_statsdelta_open( struct inode *inode, struct file *file );
|
|
static int proc_status_open( struct inode *inode, struct file *file );
|
|
static int proc_SSID_open( struct inode *inode, struct file *file );
|
|
static int proc_APList_open( struct inode *inode, struct file *file );
|
|
static int proc_BSSList_open( struct inode *inode, struct file *file );
|
|
static int proc_config_open( struct inode *inode, struct file *file );
|
|
static int proc_wepkey_open( struct inode *inode, struct file *file );
|
|
|
|
static const struct file_operations proc_statsdelta_ops = {
|
|
.read = proc_read,
|
|
.open = proc_statsdelta_open,
|
|
.release = proc_close
|
|
};
|
|
|
|
static const struct file_operations proc_stats_ops = {
|
|
.read = proc_read,
|
|
.open = proc_stats_open,
|
|
.release = proc_close
|
|
};
|
|
|
|
static const struct file_operations proc_status_ops = {
|
|
.read = proc_read,
|
|
.open = proc_status_open,
|
|
.release = proc_close
|
|
};
|
|
|
|
static const struct file_operations proc_SSID_ops = {
|
|
.read = proc_read,
|
|
.write = proc_write,
|
|
.open = proc_SSID_open,
|
|
.release = proc_close
|
|
};
|
|
|
|
static const struct file_operations proc_BSSList_ops = {
|
|
.read = proc_read,
|
|
.write = proc_write,
|
|
.open = proc_BSSList_open,
|
|
.release = proc_close
|
|
};
|
|
|
|
static const struct file_operations proc_APList_ops = {
|
|
.read = proc_read,
|
|
.write = proc_write,
|
|
.open = proc_APList_open,
|
|
.release = proc_close
|
|
};
|
|
|
|
static const struct file_operations proc_config_ops = {
|
|
.read = proc_read,
|
|
.write = proc_write,
|
|
.open = proc_config_open,
|
|
.release = proc_close
|
|
};
|
|
|
|
static const struct file_operations proc_wepkey_ops = {
|
|
.read = proc_read,
|
|
.write = proc_write,
|
|
.open = proc_wepkey_open,
|
|
.release = proc_close
|
|
};
|
|
|
|
static struct proc_dir_entry *airo_entry;
|
|
|
|
struct proc_data {
|
|
int release_buffer;
|
|
int readlen;
|
|
char *rbuffer;
|
|
int writelen;
|
|
int maxwritelen;
|
|
char *wbuffer;
|
|
void (*on_close) (struct inode *, struct file *);
|
|
};
|
|
|
|
#ifndef SETPROC_OPS
|
|
#define SETPROC_OPS(entry, ops) (entry)->proc_fops = &(ops)
|
|
#endif
|
|
|
|
static int setup_proc_entry( struct net_device *dev,
|
|
struct airo_info *apriv ) {
|
|
struct proc_dir_entry *entry;
|
|
/* First setup the device directory */
|
|
strcpy(apriv->proc_name,dev->name);
|
|
apriv->proc_entry = create_proc_entry(apriv->proc_name,
|
|
S_IFDIR|airo_perm,
|
|
airo_entry);
|
|
if (!apriv->proc_entry)
|
|
goto fail;
|
|
apriv->proc_entry->uid = proc_uid;
|
|
apriv->proc_entry->gid = proc_gid;
|
|
apriv->proc_entry->owner = THIS_MODULE;
|
|
|
|
/* Setup the StatsDelta */
|
|
entry = create_proc_entry("StatsDelta",
|
|
S_IFREG | (S_IRUGO&proc_perm),
|
|
apriv->proc_entry);
|
|
if (!entry)
|
|
goto fail_stats_delta;
|
|
entry->uid = proc_uid;
|
|
entry->gid = proc_gid;
|
|
entry->data = dev;
|
|
entry->owner = THIS_MODULE;
|
|
SETPROC_OPS(entry, proc_statsdelta_ops);
|
|
|
|
/* Setup the Stats */
|
|
entry = create_proc_entry("Stats",
|
|
S_IFREG | (S_IRUGO&proc_perm),
|
|
apriv->proc_entry);
|
|
if (!entry)
|
|
goto fail_stats;
|
|
entry->uid = proc_uid;
|
|
entry->gid = proc_gid;
|
|
entry->data = dev;
|
|
entry->owner = THIS_MODULE;
|
|
SETPROC_OPS(entry, proc_stats_ops);
|
|
|
|
/* Setup the Status */
|
|
entry = create_proc_entry("Status",
|
|
S_IFREG | (S_IRUGO&proc_perm),
|
|
apriv->proc_entry);
|
|
if (!entry)
|
|
goto fail_status;
|
|
entry->uid = proc_uid;
|
|
entry->gid = proc_gid;
|
|
entry->data = dev;
|
|
entry->owner = THIS_MODULE;
|
|
SETPROC_OPS(entry, proc_status_ops);
|
|
|
|
/* Setup the Config */
|
|
entry = create_proc_entry("Config",
|
|
S_IFREG | proc_perm,
|
|
apriv->proc_entry);
|
|
if (!entry)
|
|
goto fail_config;
|
|
entry->uid = proc_uid;
|
|
entry->gid = proc_gid;
|
|
entry->data = dev;
|
|
entry->owner = THIS_MODULE;
|
|
SETPROC_OPS(entry, proc_config_ops);
|
|
|
|
/* Setup the SSID */
|
|
entry = create_proc_entry("SSID",
|
|
S_IFREG | proc_perm,
|
|
apriv->proc_entry);
|
|
if (!entry)
|
|
goto fail_ssid;
|
|
entry->uid = proc_uid;
|
|
entry->gid = proc_gid;
|
|
entry->data = dev;
|
|
entry->owner = THIS_MODULE;
|
|
SETPROC_OPS(entry, proc_SSID_ops);
|
|
|
|
/* Setup the APList */
|
|
entry = create_proc_entry("APList",
|
|
S_IFREG | proc_perm,
|
|
apriv->proc_entry);
|
|
if (!entry)
|
|
goto fail_aplist;
|
|
entry->uid = proc_uid;
|
|
entry->gid = proc_gid;
|
|
entry->data = dev;
|
|
entry->owner = THIS_MODULE;
|
|
SETPROC_OPS(entry, proc_APList_ops);
|
|
|
|
/* Setup the BSSList */
|
|
entry = create_proc_entry("BSSList",
|
|
S_IFREG | proc_perm,
|
|
apriv->proc_entry);
|
|
if (!entry)
|
|
goto fail_bsslist;
|
|
entry->uid = proc_uid;
|
|
entry->gid = proc_gid;
|
|
entry->data = dev;
|
|
entry->owner = THIS_MODULE;
|
|
SETPROC_OPS(entry, proc_BSSList_ops);
|
|
|
|
/* Setup the WepKey */
|
|
entry = create_proc_entry("WepKey",
|
|
S_IFREG | proc_perm,
|
|
apriv->proc_entry);
|
|
if (!entry)
|
|
goto fail_wepkey;
|
|
entry->uid = proc_uid;
|
|
entry->gid = proc_gid;
|
|
entry->data = dev;
|
|
entry->owner = THIS_MODULE;
|
|
SETPROC_OPS(entry, proc_wepkey_ops);
|
|
|
|
return 0;
|
|
|
|
fail_wepkey:
|
|
remove_proc_entry("BSSList", apriv->proc_entry);
|
|
fail_bsslist:
|
|
remove_proc_entry("APList", apriv->proc_entry);
|
|
fail_aplist:
|
|
remove_proc_entry("SSID", apriv->proc_entry);
|
|
fail_ssid:
|
|
remove_proc_entry("Config", apriv->proc_entry);
|
|
fail_config:
|
|
remove_proc_entry("Status", apriv->proc_entry);
|
|
fail_status:
|
|
remove_proc_entry("Stats", apriv->proc_entry);
|
|
fail_stats:
|
|
remove_proc_entry("StatsDelta", apriv->proc_entry);
|
|
fail_stats_delta:
|
|
remove_proc_entry(apriv->proc_name, airo_entry);
|
|
fail:
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static int takedown_proc_entry( struct net_device *dev,
|
|
struct airo_info *apriv ) {
|
|
if ( !apriv->proc_entry->namelen ) return 0;
|
|
remove_proc_entry("Stats",apriv->proc_entry);
|
|
remove_proc_entry("StatsDelta",apriv->proc_entry);
|
|
remove_proc_entry("Status",apriv->proc_entry);
|
|
remove_proc_entry("Config",apriv->proc_entry);
|
|
remove_proc_entry("SSID",apriv->proc_entry);
|
|
remove_proc_entry("APList",apriv->proc_entry);
|
|
remove_proc_entry("BSSList",apriv->proc_entry);
|
|
remove_proc_entry("WepKey",apriv->proc_entry);
|
|
remove_proc_entry(apriv->proc_name,airo_entry);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* What we want from the proc_fs is to be able to efficiently read
|
|
* and write the configuration. To do this, we want to read the
|
|
* configuration when the file is opened and write it when the file is
|
|
* closed. So basically we allocate a read buffer at open and fill it
|
|
* with data, and allocate a write buffer and read it at close.
|
|
*/
|
|
|
|
/*
|
|
* The read routine is generic, it relies on the preallocated rbuffer
|
|
* to supply the data.
|
|
*/
|
|
static ssize_t proc_read( struct file *file,
|
|
char __user *buffer,
|
|
size_t len,
|
|
loff_t *offset )
|
|
{
|
|
loff_t pos = *offset;
|
|
struct proc_data *priv = (struct proc_data*)file->private_data;
|
|
|
|
if (!priv->rbuffer)
|
|
return -EINVAL;
|
|
|
|
if (pos < 0)
|
|
return -EINVAL;
|
|
if (pos >= priv->readlen)
|
|
return 0;
|
|
if (len > priv->readlen - pos)
|
|
len = priv->readlen - pos;
|
|
if (copy_to_user(buffer, priv->rbuffer + pos, len))
|
|
return -EFAULT;
|
|
*offset = pos + len;
|
|
return len;
|
|
}
|
|
|
|
/*
|
|
* The write routine is generic, it fills in a preallocated rbuffer
|
|
* to supply the data.
|
|
*/
|
|
static ssize_t proc_write( struct file *file,
|
|
const char __user *buffer,
|
|
size_t len,
|
|
loff_t *offset )
|
|
{
|
|
loff_t pos = *offset;
|
|
struct proc_data *priv = (struct proc_data*)file->private_data;
|
|
|
|
if (!priv->wbuffer)
|
|
return -EINVAL;
|
|
|
|
if (pos < 0)
|
|
return -EINVAL;
|
|
if (pos >= priv->maxwritelen)
|
|
return 0;
|
|
if (len > priv->maxwritelen - pos)
|
|
len = priv->maxwritelen - pos;
|
|
if (copy_from_user(priv->wbuffer + pos, buffer, len))
|
|
return -EFAULT;
|
|
if ( pos + len > priv->writelen )
|
|
priv->writelen = len + file->f_pos;
|
|
*offset = pos + len;
|
|
return len;
|
|
}
|
|
|
|
static int proc_status_open( struct inode *inode, struct file *file ) {
|
|
struct proc_data *data;
|
|
struct proc_dir_entry *dp = PDE(inode);
|
|
struct net_device *dev = dp->data;
|
|
struct airo_info *apriv = dev->priv;
|
|
CapabilityRid cap_rid;
|
|
StatusRid status_rid;
|
|
int i;
|
|
|
|
if ((file->private_data = kzalloc(sizeof(struct proc_data ), GFP_KERNEL)) == NULL)
|
|
return -ENOMEM;
|
|
data = (struct proc_data *)file->private_data;
|
|
if ((data->rbuffer = kmalloc( 2048, GFP_KERNEL )) == NULL) {
|
|
kfree (file->private_data);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
readStatusRid(apriv, &status_rid, 1);
|
|
readCapabilityRid(apriv, &cap_rid, 1);
|
|
|
|
i = sprintf(data->rbuffer, "Status: %s%s%s%s%s%s%s%s%s\n",
|
|
status_rid.mode & 1 ? "CFG ": "",
|
|
status_rid.mode & 2 ? "ACT ": "",
|
|
status_rid.mode & 0x10 ? "SYN ": "",
|
|
status_rid.mode & 0x20 ? "LNK ": "",
|
|
status_rid.mode & 0x40 ? "LEAP ": "",
|
|
status_rid.mode & 0x80 ? "PRIV ": "",
|
|
status_rid.mode & 0x100 ? "KEY ": "",
|
|
status_rid.mode & 0x200 ? "WEP ": "",
|
|
status_rid.mode & 0x8000 ? "ERR ": "");
|
|
sprintf( data->rbuffer+i, "Mode: %x\n"
|
|
"Signal Strength: %d\n"
|
|
"Signal Quality: %d\n"
|
|
"SSID: %-.*s\n"
|
|
"AP: %-.16s\n"
|
|
"Freq: %d\n"
|
|
"BitRate: %dmbs\n"
|
|
"Driver Version: %s\n"
|
|
"Device: %s\nManufacturer: %s\nFirmware Version: %s\n"
|
|
"Radio type: %x\nCountry: %x\nHardware Version: %x\n"
|
|
"Software Version: %x\nSoftware Subversion: %x\n"
|
|
"Boot block version: %x\n",
|
|
(int)status_rid.mode,
|
|
(int)status_rid.normalizedSignalStrength,
|
|
(int)status_rid.signalQuality,
|
|
(int)status_rid.SSIDlen,
|
|
status_rid.SSID,
|
|
status_rid.apName,
|
|
(int)status_rid.channel,
|
|
(int)status_rid.currentXmitRate/2,
|
|
version,
|
|
cap_rid.prodName,
|
|
cap_rid.manName,
|
|
cap_rid.prodVer,
|
|
cap_rid.radioType,
|
|
cap_rid.country,
|
|
cap_rid.hardVer,
|
|
(int)cap_rid.softVer,
|
|
(int)cap_rid.softSubVer,
|
|
(int)cap_rid.bootBlockVer );
|
|
data->readlen = strlen( data->rbuffer );
|
|
return 0;
|
|
}
|
|
|
|
static int proc_stats_rid_open(struct inode*, struct file*, u16);
|
|
static int proc_statsdelta_open( struct inode *inode,
|
|
struct file *file ) {
|
|
if (file->f_mode&FMODE_WRITE) {
|
|
return proc_stats_rid_open(inode, file, RID_STATSDELTACLEAR);
|
|
}
|
|
return proc_stats_rid_open(inode, file, RID_STATSDELTA);
|
|
}
|
|
|
|
static int proc_stats_open( struct inode *inode, struct file *file ) {
|
|
return proc_stats_rid_open(inode, file, RID_STATS);
|
|
}
|
|
|
|
static int proc_stats_rid_open( struct inode *inode,
|
|
struct file *file,
|
|
u16 rid ) {
|
|
struct proc_data *data;
|
|
struct proc_dir_entry *dp = PDE(inode);
|
|
struct net_device *dev = dp->data;
|
|
struct airo_info *apriv = dev->priv;
|
|
StatsRid stats;
|
|
int i, j;
|
|
u32 *vals = stats.vals;
|
|
|
|
if ((file->private_data = kzalloc(sizeof(struct proc_data ), GFP_KERNEL)) == NULL)
|
|
return -ENOMEM;
|
|
data = (struct proc_data *)file->private_data;
|
|
if ((data->rbuffer = kmalloc( 4096, GFP_KERNEL )) == NULL) {
|
|
kfree (file->private_data);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
readStatsRid(apriv, &stats, rid, 1);
|
|
|
|
j = 0;
|
|
for(i=0; statsLabels[i]!=(char *)-1 &&
|
|
i*4<stats.len; i++){
|
|
if (!statsLabels[i]) continue;
|
|
if (j+strlen(statsLabels[i])+16>4096) {
|
|
airo_print_warn(apriv->dev->name,
|
|
"Potentially disasterous buffer overflow averted!");
|
|
break;
|
|
}
|
|
j+=sprintf(data->rbuffer+j, "%s: %u\n", statsLabels[i], vals[i]);
|
|
}
|
|
if (i*4>=stats.len){
|
|
airo_print_warn(apriv->dev->name, "Got a short rid");
|
|
}
|
|
data->readlen = j;
|
|
return 0;
|
|
}
|
|
|
|
static int get_dec_u16( char *buffer, int *start, int limit ) {
|
|
u16 value;
|
|
int valid = 0;
|
|
for( value = 0; buffer[*start] >= '0' &&
|
|
buffer[*start] <= '9' &&
|
|
*start < limit; (*start)++ ) {
|
|
valid = 1;
|
|
value *= 10;
|
|
value += buffer[*start] - '0';
|
|
}
|
|
if ( !valid ) return -1;
|
|
return value;
|
|
}
|
|
|
|
static int airo_config_commit(struct net_device *dev,
|
|
struct iw_request_info *info, void *zwrq,
|
|
char *extra);
|
|
|
|
static void proc_config_on_close( struct inode *inode, struct file *file ) {
|
|
struct proc_data *data = file->private_data;
|
|
struct proc_dir_entry *dp = PDE(inode);
|
|
struct net_device *dev = dp->data;
|
|
struct airo_info *ai = dev->priv;
|
|
char *line;
|
|
|
|
if ( !data->writelen ) return;
|
|
|
|
readConfigRid(ai, 1);
|
|
set_bit (FLAG_COMMIT, &ai->flags);
|
|
|
|
line = data->wbuffer;
|
|
while( line[0] ) {
|
|
/*** Mode processing */
|
|
if ( !strncmp( line, "Mode: ", 6 ) ) {
|
|
line += 6;
|
|
if ((ai->config.rmode & 0xff) >= RXMODE_RFMON)
|
|
set_bit (FLAG_RESET, &ai->flags);
|
|
ai->config.rmode &= 0xfe00;
|
|
clear_bit (FLAG_802_11, &ai->flags);
|
|
ai->config.opmode &= 0xFF00;
|
|
ai->config.scanMode = SCANMODE_ACTIVE;
|
|
if ( line[0] == 'a' ) {
|
|
ai->config.opmode |= 0;
|
|
} else {
|
|
ai->config.opmode |= 1;
|
|
if ( line[0] == 'r' ) {
|
|
ai->config.rmode |= RXMODE_RFMON | RXMODE_DISABLE_802_3_HEADER;
|
|
ai->config.scanMode = SCANMODE_PASSIVE;
|
|
set_bit (FLAG_802_11, &ai->flags);
|
|
} else if ( line[0] == 'y' ) {
|
|
ai->config.rmode |= RXMODE_RFMON_ANYBSS | RXMODE_DISABLE_802_3_HEADER;
|
|
ai->config.scanMode = SCANMODE_PASSIVE;
|
|
set_bit (FLAG_802_11, &ai->flags);
|
|
} else if ( line[0] == 'l' )
|
|
ai->config.rmode |= RXMODE_LANMON;
|
|
}
|
|
set_bit (FLAG_COMMIT, &ai->flags);
|
|
}
|
|
|
|
/*** Radio status */
|
|
else if (!strncmp(line,"Radio: ", 7)) {
|
|
line += 7;
|
|
if (!strncmp(line,"off",3)) {
|
|
set_bit (FLAG_RADIO_OFF, &ai->flags);
|
|
} else {
|
|
clear_bit (FLAG_RADIO_OFF, &ai->flags);
|
|
}
|
|
}
|
|
/*** NodeName processing */
|
|
else if ( !strncmp( line, "NodeName: ", 10 ) ) {
|
|
int j;
|
|
|
|
line += 10;
|
|
memset( ai->config.nodeName, 0, 16 );
|
|
/* Do the name, assume a space between the mode and node name */
|
|
for( j = 0; j < 16 && line[j] != '\n'; j++ ) {
|
|
ai->config.nodeName[j] = line[j];
|
|
}
|
|
set_bit (FLAG_COMMIT, &ai->flags);
|
|
}
|
|
|
|
/*** PowerMode processing */
|
|
else if ( !strncmp( line, "PowerMode: ", 11 ) ) {
|
|
line += 11;
|
|
if ( !strncmp( line, "PSPCAM", 6 ) ) {
|
|
ai->config.powerSaveMode = POWERSAVE_PSPCAM;
|
|
set_bit (FLAG_COMMIT, &ai->flags);
|
|
} else if ( !strncmp( line, "PSP", 3 ) ) {
|
|
ai->config.powerSaveMode = POWERSAVE_PSP;
|
|
set_bit (FLAG_COMMIT, &ai->flags);
|
|
} else {
|
|
ai->config.powerSaveMode = POWERSAVE_CAM;
|
|
set_bit (FLAG_COMMIT, &ai->flags);
|
|
}
|
|
} else if ( !strncmp( line, "DataRates: ", 11 ) ) {
|
|
int v, i = 0, k = 0; /* i is index into line,
|
|
k is index to rates */
|
|
|
|
line += 11;
|
|
while((v = get_dec_u16(line, &i, 3))!=-1) {
|
|
ai->config.rates[k++] = (u8)v;
|
|
line += i + 1;
|
|
i = 0;
|
|
}
|
|
set_bit (FLAG_COMMIT, &ai->flags);
|
|
} else if ( !strncmp( line, "Channel: ", 9 ) ) {
|
|
int v, i = 0;
|
|
line += 9;
|
|
v = get_dec_u16(line, &i, i+3);
|
|
if ( v != -1 ) {
|
|
ai->config.channelSet = (u16)v;
|
|
set_bit (FLAG_COMMIT, &ai->flags);
|
|
}
|
|
} else if ( !strncmp( line, "XmitPower: ", 11 ) ) {
|
|
int v, i = 0;
|
|
line += 11;
|
|
v = get_dec_u16(line, &i, i+3);
|
|
if ( v != -1 ) {
|
|
ai->config.txPower = (u16)v;
|
|
set_bit (FLAG_COMMIT, &ai->flags);
|
|
}
|
|
} else if ( !strncmp( line, "WEP: ", 5 ) ) {
|
|
line += 5;
|
|
switch( line[0] ) {
|
|
case 's':
|
|
ai->config.authType = (u16)AUTH_SHAREDKEY;
|
|
break;
|
|
case 'e':
|
|
ai->config.authType = (u16)AUTH_ENCRYPT;
|
|
break;
|
|
default:
|
|
ai->config.authType = (u16)AUTH_OPEN;
|
|
break;
|
|
}
|
|
set_bit (FLAG_COMMIT, &ai->flags);
|
|
} else if ( !strncmp( line, "LongRetryLimit: ", 16 ) ) {
|
|
int v, i = 0;
|
|
|
|
line += 16;
|
|
v = get_dec_u16(line, &i, 3);
|
|
v = (v<0) ? 0 : ((v>255) ? 255 : v);
|
|
ai->config.longRetryLimit = (u16)v;
|
|
set_bit (FLAG_COMMIT, &ai->flags);
|
|
} else if ( !strncmp( line, "ShortRetryLimit: ", 17 ) ) {
|
|
int v, i = 0;
|
|
|
|
line += 17;
|
|
v = get_dec_u16(line, &i, 3);
|
|
v = (v<0) ? 0 : ((v>255) ? 255 : v);
|
|
ai->config.shortRetryLimit = (u16)v;
|
|
set_bit (FLAG_COMMIT, &ai->flags);
|
|
} else if ( !strncmp( line, "RTSThreshold: ", 14 ) ) {
|
|
int v, i = 0;
|
|
|
|
line += 14;
|
|
v = get_dec_u16(line, &i, 4);
|
|
v = (v<0) ? 0 : ((v>AIRO_DEF_MTU) ? AIRO_DEF_MTU : v);
|
|
ai->config.rtsThres = (u16)v;
|
|
set_bit (FLAG_COMMIT, &ai->flags);
|
|
} else if ( !strncmp( line, "TXMSDULifetime: ", 16 ) ) {
|
|
int v, i = 0;
|
|
|
|
line += 16;
|
|
v = get_dec_u16(line, &i, 5);
|
|
v = (v<0) ? 0 : v;
|
|
ai->config.txLifetime = (u16)v;
|
|
set_bit (FLAG_COMMIT, &ai->flags);
|
|
} else if ( !strncmp( line, "RXMSDULifetime: ", 16 ) ) {
|
|
int v, i = 0;
|
|
|
|
line += 16;
|
|
v = get_dec_u16(line, &i, 5);
|
|
v = (v<0) ? 0 : v;
|
|
ai->config.rxLifetime = (u16)v;
|
|
set_bit (FLAG_COMMIT, &ai->flags);
|
|
} else if ( !strncmp( line, "TXDiversity: ", 13 ) ) {
|
|
ai->config.txDiversity =
|
|
(line[13]=='l') ? 1 :
|
|
((line[13]=='r')? 2: 3);
|
|
set_bit (FLAG_COMMIT, &ai->flags);
|
|
} else if ( !strncmp( line, "RXDiversity: ", 13 ) ) {
|
|
ai->config.rxDiversity =
|
|
(line[13]=='l') ? 1 :
|
|
((line[13]=='r')? 2: 3);
|
|
set_bit (FLAG_COMMIT, &ai->flags);
|
|
} else if ( !strncmp( line, "FragThreshold: ", 15 ) ) {
|
|
int v, i = 0;
|
|
|
|
line += 15;
|
|
v = get_dec_u16(line, &i, 4);
|
|
v = (v<256) ? 256 : ((v>AIRO_DEF_MTU) ? AIRO_DEF_MTU : v);
|
|
v = v & 0xfffe; /* Make sure its even */
|
|
ai->config.fragThresh = (u16)v;
|
|
set_bit (FLAG_COMMIT, &ai->flags);
|
|
} else if (!strncmp(line, "Modulation: ", 12)) {
|
|
line += 12;
|
|
switch(*line) {
|
|
case 'd': ai->config.modulation=MOD_DEFAULT; set_bit(FLAG_COMMIT, &ai->flags); break;
|
|
case 'c': ai->config.modulation=MOD_CCK; set_bit(FLAG_COMMIT, &ai->flags); break;
|
|
case 'm': ai->config.modulation=MOD_MOK; set_bit(FLAG_COMMIT, &ai->flags); break;
|
|
default: airo_print_warn(ai->dev->name, "Unknown modulation");
|
|
}
|
|
} else if (!strncmp(line, "Preamble: ", 10)) {
|
|
line += 10;
|
|
switch(*line) {
|
|
case 'a': ai->config.preamble=PREAMBLE_AUTO; set_bit(FLAG_COMMIT, &ai->flags); break;
|
|
case 'l': ai->config.preamble=PREAMBLE_LONG; set_bit(FLAG_COMMIT, &ai->flags); break;
|
|
case 's': ai->config.preamble=PREAMBLE_SHORT; set_bit(FLAG_COMMIT, &ai->flags); break;
|
|
default: airo_print_warn(ai->dev->name, "Unknown preamble");
|
|
}
|
|
} else {
|
|
airo_print_warn(ai->dev->name, "Couldn't figure out %s", line);
|
|
}
|
|
while( line[0] && line[0] != '\n' ) line++;
|
|
if ( line[0] ) line++;
|
|
}
|
|
airo_config_commit(dev, NULL, NULL, NULL);
|
|
}
|
|
|
|
static char *get_rmode(u16 mode) {
|
|
switch(mode&0xff) {
|
|
case RXMODE_RFMON: return "rfmon";
|
|
case RXMODE_RFMON_ANYBSS: return "yna (any) bss rfmon";
|
|
case RXMODE_LANMON: return "lanmon";
|
|
}
|
|
return "ESS";
|
|
}
|
|
|
|
static int proc_config_open( struct inode *inode, struct file *file ) {
|
|
struct proc_data *data;
|
|
struct proc_dir_entry *dp = PDE(inode);
|
|
struct net_device *dev = dp->data;
|
|
struct airo_info *ai = dev->priv;
|
|
int i;
|
|
|
|
if ((file->private_data = kzalloc(sizeof(struct proc_data ), GFP_KERNEL)) == NULL)
|
|
return -ENOMEM;
|
|
data = (struct proc_data *)file->private_data;
|
|
if ((data->rbuffer = kmalloc( 2048, GFP_KERNEL )) == NULL) {
|
|
kfree (file->private_data);
|
|
return -ENOMEM;
|
|
}
|
|
if ((data->wbuffer = kzalloc( 2048, GFP_KERNEL )) == NULL) {
|
|
kfree (data->rbuffer);
|
|
kfree (file->private_data);
|
|
return -ENOMEM;
|
|
}
|
|
data->maxwritelen = 2048;
|
|
data->on_close = proc_config_on_close;
|
|
|
|
readConfigRid(ai, 1);
|
|
|
|
i = sprintf( data->rbuffer,
|
|
"Mode: %s\n"
|
|
"Radio: %s\n"
|
|
"NodeName: %-16s\n"
|
|
"PowerMode: %s\n"
|
|
"DataRates: %d %d %d %d %d %d %d %d\n"
|
|
"Channel: %d\n"
|
|
"XmitPower: %d\n",
|
|
(ai->config.opmode & 0xFF) == 0 ? "adhoc" :
|
|
(ai->config.opmode & 0xFF) == 1 ? get_rmode(ai->config.rmode):
|
|
(ai->config.opmode & 0xFF) == 2 ? "AP" :
|
|
(ai->config.opmode & 0xFF) == 3 ? "AP RPTR" : "Error",
|
|
test_bit(FLAG_RADIO_OFF, &ai->flags) ? "off" : "on",
|
|
ai->config.nodeName,
|
|
ai->config.powerSaveMode == 0 ? "CAM" :
|
|
ai->config.powerSaveMode == 1 ? "PSP" :
|
|
ai->config.powerSaveMode == 2 ? "PSPCAM" : "Error",
|
|
(int)ai->config.rates[0],
|
|
(int)ai->config.rates[1],
|
|
(int)ai->config.rates[2],
|
|
(int)ai->config.rates[3],
|
|
(int)ai->config.rates[4],
|
|
(int)ai->config.rates[5],
|
|
(int)ai->config.rates[6],
|
|
(int)ai->config.rates[7],
|
|
(int)ai->config.channelSet,
|
|
(int)ai->config.txPower
|
|
);
|
|
sprintf( data->rbuffer + i,
|
|
"LongRetryLimit: %d\n"
|
|
"ShortRetryLimit: %d\n"
|
|
"RTSThreshold: %d\n"
|
|
"TXMSDULifetime: %d\n"
|
|
"RXMSDULifetime: %d\n"
|
|
"TXDiversity: %s\n"
|
|
"RXDiversity: %s\n"
|
|
"FragThreshold: %d\n"
|
|
"WEP: %s\n"
|
|
"Modulation: %s\n"
|
|
"Preamble: %s\n",
|
|
(int)ai->config.longRetryLimit,
|
|
(int)ai->config.shortRetryLimit,
|
|
(int)ai->config.rtsThres,
|
|
(int)ai->config.txLifetime,
|
|
(int)ai->config.rxLifetime,
|
|
ai->config.txDiversity == 1 ? "left" :
|
|
ai->config.txDiversity == 2 ? "right" : "both",
|
|
ai->config.rxDiversity == 1 ? "left" :
|
|
ai->config.rxDiversity == 2 ? "right" : "both",
|
|
(int)ai->config.fragThresh,
|
|
ai->config.authType == AUTH_ENCRYPT ? "encrypt" :
|
|
ai->config.authType == AUTH_SHAREDKEY ? "shared" : "open",
|
|
ai->config.modulation == 0 ? "default" :
|
|
ai->config.modulation == MOD_CCK ? "cck" :
|
|
ai->config.modulation == MOD_MOK ? "mok" : "error",
|
|
ai->config.preamble == PREAMBLE_AUTO ? "auto" :
|
|
ai->config.preamble == PREAMBLE_LONG ? "long" :
|
|
ai->config.preamble == PREAMBLE_SHORT ? "short" : "error"
|
|
);
|
|
data->readlen = strlen( data->rbuffer );
|
|
return 0;
|
|
}
|
|
|
|
static void proc_SSID_on_close( struct inode *inode, struct file *file ) {
|
|
struct proc_data *data = (struct proc_data *)file->private_data;
|
|
struct proc_dir_entry *dp = PDE(inode);
|
|
struct net_device *dev = dp->data;
|
|
struct airo_info *ai = dev->priv;
|
|
SsidRid SSID_rid;
|
|
Resp rsp;
|
|
int i;
|
|
int offset = 0;
|
|
|
|
if ( !data->writelen ) return;
|
|
|
|
memset( &SSID_rid, 0, sizeof( SSID_rid ) );
|
|
|
|
for( i = 0; i < 3; i++ ) {
|
|
int j;
|
|
for( j = 0; j+offset < data->writelen && j < 32 &&
|
|
data->wbuffer[offset+j] != '\n'; j++ ) {
|
|
SSID_rid.ssids[i].ssid[j] = data->wbuffer[offset+j];
|
|
}
|
|
if ( j == 0 ) break;
|
|
SSID_rid.ssids[i].len = j;
|
|
offset += j;
|
|
while( data->wbuffer[offset] != '\n' &&
|
|
offset < data->writelen ) offset++;
|
|
offset++;
|
|
}
|
|
if (i)
|
|
SSID_rid.len = sizeof(SSID_rid);
|
|
disable_MAC(ai, 1);
|
|
writeSsidRid(ai, &SSID_rid, 1);
|
|
enable_MAC(ai, &rsp, 1);
|
|
}
|
|
|
|
static inline u8 hexVal(char c) {
|
|
if (c>='0' && c<='9') return c -= '0';
|
|
if (c>='a' && c<='f') return c -= 'a'-10;
|
|
if (c>='A' && c<='F') return c -= 'A'-10;
|
|
return 0;
|
|
}
|
|
|
|
static void proc_APList_on_close( struct inode *inode, struct file *file ) {
|
|
struct proc_data *data = (struct proc_data *)file->private_data;
|
|
struct proc_dir_entry *dp = PDE(inode);
|
|
struct net_device *dev = dp->data;
|
|
struct airo_info *ai = dev->priv;
|
|
APListRid APList_rid;
|
|
Resp rsp;
|
|
int i;
|
|
|
|
if ( !data->writelen ) return;
|
|
|
|
memset( &APList_rid, 0, sizeof(APList_rid) );
|
|
APList_rid.len = sizeof(APList_rid);
|
|
|
|
for( i = 0; i < 4 && data->writelen >= (i+1)*6*3; i++ ) {
|
|
int j;
|
|
for( j = 0; j < 6*3 && data->wbuffer[j+i*6*3]; j++ ) {
|
|
switch(j%3) {
|
|
case 0:
|
|
APList_rid.ap[i][j/3]=
|
|
hexVal(data->wbuffer[j+i*6*3])<<4;
|
|
break;
|
|
case 1:
|
|
APList_rid.ap[i][j/3]|=
|
|
hexVal(data->wbuffer[j+i*6*3]);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
disable_MAC(ai, 1);
|
|
writeAPListRid(ai, &APList_rid, 1);
|
|
enable_MAC(ai, &rsp, 1);
|
|
}
|
|
|
|
/* This function wraps PC4500_writerid with a MAC disable */
|
|
static int do_writerid( struct airo_info *ai, u16 rid, const void *rid_data,
|
|
int len, int dummy ) {
|
|
int rc;
|
|
Resp rsp;
|
|
|
|
disable_MAC(ai, 1);
|
|
rc = PC4500_writerid(ai, rid, rid_data, len, 1);
|
|
enable_MAC(ai, &rsp, 1);
|
|
return rc;
|
|
}
|
|
|
|
/* Returns the length of the key at the index. If index == 0xffff
|
|
* the index of the transmit key is returned. If the key doesn't exist,
|
|
* -1 will be returned.
|
|
*/
|
|
static int get_wep_key(struct airo_info *ai, u16 index) {
|
|
WepKeyRid wkr;
|
|
int rc;
|
|
u16 lastindex;
|
|
|
|
rc = readWepKeyRid(ai, &wkr, 1, 1);
|
|
if (rc == SUCCESS) do {
|
|
lastindex = wkr.kindex;
|
|
if (wkr.kindex == index) {
|
|
if (index == 0xffff) {
|
|
return wkr.mac[0];
|
|
}
|
|
return wkr.klen;
|
|
}
|
|
readWepKeyRid(ai, &wkr, 0, 1);
|
|
} while(lastindex != wkr.kindex);
|
|
return -1;
|
|
}
|
|
|
|
static int set_wep_key(struct airo_info *ai, u16 index,
|
|
const char *key, u16 keylen, int perm, int lock ) {
|
|
static const unsigned char macaddr[ETH_ALEN] = { 0x01, 0, 0, 0, 0, 0 };
|
|
WepKeyRid wkr;
|
|
Resp rsp;
|
|
|
|
memset(&wkr, 0, sizeof(wkr));
|
|
if (keylen == 0) {
|
|
// We are selecting which key to use
|
|
wkr.len = sizeof(wkr);
|
|
wkr.kindex = 0xffff;
|
|
wkr.mac[0] = (char)index;
|
|
if (perm) ai->defindex = (char)index;
|
|
} else {
|
|
// We are actually setting the key
|
|
wkr.len = sizeof(wkr);
|
|
wkr.kindex = index;
|
|
wkr.klen = keylen;
|
|
memcpy( wkr.key, key, keylen );
|
|
memcpy( wkr.mac, macaddr, ETH_ALEN );
|
|
}
|
|
|
|
if (perm) disable_MAC(ai, lock);
|
|
writeWepKeyRid(ai, &wkr, perm, lock);
|
|
if (perm) enable_MAC(ai, &rsp, lock);
|
|
return 0;
|
|
}
|
|
|
|
static void proc_wepkey_on_close( struct inode *inode, struct file *file ) {
|
|
struct proc_data *data;
|
|
struct proc_dir_entry *dp = PDE(inode);
|
|
struct net_device *dev = dp->data;
|
|
struct airo_info *ai = dev->priv;
|
|
int i;
|
|
char key[16];
|
|
u16 index = 0;
|
|
int j = 0;
|
|
|
|
memset(key, 0, sizeof(key));
|
|
|
|
data = (struct proc_data *)file->private_data;
|
|
if ( !data->writelen ) return;
|
|
|
|
if (data->wbuffer[0] >= '0' && data->wbuffer[0] <= '3' &&
|
|
(data->wbuffer[1] == ' ' || data->wbuffer[1] == '\n')) {
|
|
index = data->wbuffer[0] - '0';
|
|
if (data->wbuffer[1] == '\n') {
|
|
set_wep_key(ai, index, NULL, 0, 1, 1);
|
|
return;
|
|
}
|
|
j = 2;
|
|
} else {
|
|
airo_print_err(ai->dev->name, "WepKey passed invalid key index");
|
|
return;
|
|
}
|
|
|
|
for( i = 0; i < 16*3 && data->wbuffer[i+j]; i++ ) {
|
|
switch(i%3) {
|
|
case 0:
|
|
key[i/3] = hexVal(data->wbuffer[i+j])<<4;
|
|
break;
|
|
case 1:
|
|
key[i/3] |= hexVal(data->wbuffer[i+j]);
|
|
break;
|
|
}
|
|
}
|
|
set_wep_key(ai, index, key, i/3, 1, 1);
|
|
}
|
|
|
|
static int proc_wepkey_open( struct inode *inode, struct file *file ) {
|
|
struct proc_data *data;
|
|
struct proc_dir_entry *dp = PDE(inode);
|
|
struct net_device *dev = dp->data;
|
|
struct airo_info *ai = dev->priv;
|
|
char *ptr;
|
|
WepKeyRid wkr;
|
|
u16 lastindex;
|
|
int j=0;
|
|
int rc;
|
|
|
|
if ((file->private_data = kzalloc(sizeof(struct proc_data ), GFP_KERNEL)) == NULL)
|
|
return -ENOMEM;
|
|
memset(&wkr, 0, sizeof(wkr));
|
|
data = (struct proc_data *)file->private_data;
|
|
if ((data->rbuffer = kzalloc( 180, GFP_KERNEL )) == NULL) {
|
|
kfree (file->private_data);
|
|
return -ENOMEM;
|
|
}
|
|
data->writelen = 0;
|
|
data->maxwritelen = 80;
|
|
if ((data->wbuffer = kzalloc( 80, GFP_KERNEL )) == NULL) {
|
|
kfree (data->rbuffer);
|
|
kfree (file->private_data);
|
|
return -ENOMEM;
|
|
}
|
|
data->on_close = proc_wepkey_on_close;
|
|
|
|
ptr = data->rbuffer;
|
|
strcpy(ptr, "No wep keys\n");
|
|
rc = readWepKeyRid(ai, &wkr, 1, 1);
|
|
if (rc == SUCCESS) do {
|
|
lastindex = wkr.kindex;
|
|
if (wkr.kindex == 0xffff) {
|
|
j += sprintf(ptr+j, "Tx key = %d\n",
|
|
(int)wkr.mac[0]);
|
|
} else {
|
|
j += sprintf(ptr+j, "Key %d set with length = %d\n",
|
|
(int)wkr.kindex, (int)wkr.klen);
|
|
}
|
|
readWepKeyRid(ai, &wkr, 0, 1);
|
|
} while((lastindex != wkr.kindex) && (j < 180-30));
|
|
|
|
data->readlen = strlen( data->rbuffer );
|
|
return 0;
|
|
}
|
|
|
|
static int proc_SSID_open( struct inode *inode, struct file *file ) {
|
|
struct proc_data *data;
|
|
struct proc_dir_entry *dp = PDE(inode);
|
|
struct net_device *dev = dp->data;
|
|
struct airo_info *ai = dev->priv;
|
|
int i;
|
|
char *ptr;
|
|
SsidRid SSID_rid;
|
|
|
|
if ((file->private_data = kzalloc(sizeof(struct proc_data ), GFP_KERNEL)) == NULL)
|
|
return -ENOMEM;
|
|
data = (struct proc_data *)file->private_data;
|
|
if ((data->rbuffer = kmalloc( 104, GFP_KERNEL )) == NULL) {
|
|
kfree (file->private_data);
|
|
return -ENOMEM;
|
|
}
|
|
data->writelen = 0;
|
|
data->maxwritelen = 33*3;
|
|
if ((data->wbuffer = kzalloc( 33*3, GFP_KERNEL )) == NULL) {
|
|
kfree (data->rbuffer);
|
|
kfree (file->private_data);
|
|
return -ENOMEM;
|
|
}
|
|
data->on_close = proc_SSID_on_close;
|
|
|
|
readSsidRid(ai, &SSID_rid);
|
|
ptr = data->rbuffer;
|
|
for( i = 0; i < 3; i++ ) {
|
|
int j;
|
|
if ( !SSID_rid.ssids[i].len ) break;
|
|
for( j = 0; j < 32 &&
|
|
j < SSID_rid.ssids[i].len &&
|
|
SSID_rid.ssids[i].ssid[j]; j++ ) {
|
|
*ptr++ = SSID_rid.ssids[i].ssid[j];
|
|
}
|
|
*ptr++ = '\n';
|
|
}
|
|
*ptr = '\0';
|
|
data->readlen = strlen( data->rbuffer );
|
|
return 0;
|
|
}
|
|
|
|
static int proc_APList_open( struct inode *inode, struct file *file ) {
|
|
struct proc_data *data;
|
|
struct proc_dir_entry *dp = PDE(inode);
|
|
struct net_device *dev = dp->data;
|
|
struct airo_info *ai = dev->priv;
|
|
int i;
|
|
char *ptr;
|
|
APListRid APList_rid;
|
|
|
|
if ((file->private_data = kzalloc(sizeof(struct proc_data ), GFP_KERNEL)) == NULL)
|
|
return -ENOMEM;
|
|
data = (struct proc_data *)file->private_data;
|
|
if ((data->rbuffer = kmalloc( 104, GFP_KERNEL )) == NULL) {
|
|
kfree (file->private_data);
|
|
return -ENOMEM;
|
|
}
|
|
data->writelen = 0;
|
|
data->maxwritelen = 4*6*3;
|
|
if ((data->wbuffer = kzalloc( data->maxwritelen, GFP_KERNEL )) == NULL) {
|
|
kfree (data->rbuffer);
|
|
kfree (file->private_data);
|
|
return -ENOMEM;
|
|
}
|
|
data->on_close = proc_APList_on_close;
|
|
|
|
readAPListRid(ai, &APList_rid);
|
|
ptr = data->rbuffer;
|
|
for( i = 0; i < 4; i++ ) {
|
|
// We end when we find a zero MAC
|
|
if ( !*(int*)APList_rid.ap[i] &&
|
|
!*(int*)&APList_rid.ap[i][2]) break;
|
|
ptr += sprintf(ptr, "%02x:%02x:%02x:%02x:%02x:%02x\n",
|
|
(int)APList_rid.ap[i][0],
|
|
(int)APList_rid.ap[i][1],
|
|
(int)APList_rid.ap[i][2],
|
|
(int)APList_rid.ap[i][3],
|
|
(int)APList_rid.ap[i][4],
|
|
(int)APList_rid.ap[i][5]);
|
|
}
|
|
if (i==0) ptr += sprintf(ptr, "Not using specific APs\n");
|
|
|
|
*ptr = '\0';
|
|
data->readlen = strlen( data->rbuffer );
|
|
return 0;
|
|
}
|
|
|
|
static int proc_BSSList_open( struct inode *inode, struct file *file ) {
|
|
struct proc_data *data;
|
|
struct proc_dir_entry *dp = PDE(inode);
|
|
struct net_device *dev = dp->data;
|
|
struct airo_info *ai = dev->priv;
|
|
char *ptr;
|
|
BSSListRid BSSList_rid;
|
|
int rc;
|
|
/* If doLoseSync is not 1, we won't do a Lose Sync */
|
|
int doLoseSync = -1;
|
|
|
|
if ((file->private_data = kzalloc(sizeof(struct proc_data ), GFP_KERNEL)) == NULL)
|
|
return -ENOMEM;
|
|
data = (struct proc_data *)file->private_data;
|
|
if ((data->rbuffer = kmalloc( 1024, GFP_KERNEL )) == NULL) {
|
|
kfree (file->private_data);
|
|
return -ENOMEM;
|
|
}
|
|
data->writelen = 0;
|
|
data->maxwritelen = 0;
|
|
data->wbuffer = NULL;
|
|
data->on_close = NULL;
|
|
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
if (!(file->f_mode & FMODE_READ)) {
|
|
Cmd cmd;
|
|
Resp rsp;
|
|
|
|
if (ai->flags & FLAG_RADIO_MASK) return -ENETDOWN;
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
cmd.cmd=CMD_LISTBSS;
|
|
if (down_interruptible(&ai->sem))
|
|
return -ERESTARTSYS;
|
|
issuecommand(ai, &cmd, &rsp);
|
|
up(&ai->sem);
|
|
data->readlen = 0;
|
|
return 0;
|
|
}
|
|
doLoseSync = 1;
|
|
}
|
|
ptr = data->rbuffer;
|
|
/* There is a race condition here if there are concurrent opens.
|
|
Since it is a rare condition, we'll just live with it, otherwise
|
|
we have to add a spin lock... */
|
|
rc = readBSSListRid(ai, doLoseSync, &BSSList_rid);
|
|
while(rc == 0 && BSSList_rid.index != 0xffff) {
|
|
ptr += sprintf(ptr, "%02x:%02x:%02x:%02x:%02x:%02x %*s rssi = %d",
|
|
(int)BSSList_rid.bssid[0],
|
|
(int)BSSList_rid.bssid[1],
|
|
(int)BSSList_rid.bssid[2],
|
|
(int)BSSList_rid.bssid[3],
|
|
(int)BSSList_rid.bssid[4],
|
|
(int)BSSList_rid.bssid[5],
|
|
(int)BSSList_rid.ssidLen,
|
|
BSSList_rid.ssid,
|
|
(int)BSSList_rid.dBm);
|
|
ptr += sprintf(ptr, " channel = %d %s %s %s %s\n",
|
|
(int)BSSList_rid.dsChannel,
|
|
BSSList_rid.cap & CAP_ESS ? "ESS" : "",
|
|
BSSList_rid.cap & CAP_IBSS ? "adhoc" : "",
|
|
BSSList_rid.cap & CAP_PRIVACY ? "wep" : "",
|
|
BSSList_rid.cap & CAP_SHORTHDR ? "shorthdr" : "");
|
|
rc = readBSSListRid(ai, 0, &BSSList_rid);
|
|
}
|
|
*ptr = '\0';
|
|
data->readlen = strlen( data->rbuffer );
|
|
return 0;
|
|
}
|
|
|
|
static int proc_close( struct inode *inode, struct file *file )
|
|
{
|
|
struct proc_data *data = file->private_data;
|
|
|
|
if (data->on_close != NULL)
|
|
data->on_close(inode, file);
|
|
kfree(data->rbuffer);
|
|
kfree(data->wbuffer);
|
|
kfree(data);
|
|
return 0;
|
|
}
|
|
|
|
/* Since the card doesn't automatically switch to the right WEP mode,
|
|
we will make it do it. If the card isn't associated, every secs we
|
|
will switch WEP modes to see if that will help. If the card is
|
|
associated we will check every minute to see if anything has
|
|
changed. */
|
|
static void timer_func( struct net_device *dev ) {
|
|
struct airo_info *apriv = dev->priv;
|
|
Resp rsp;
|
|
|
|
/* We don't have a link so try changing the authtype */
|
|
readConfigRid(apriv, 0);
|
|
disable_MAC(apriv, 0);
|
|
switch(apriv->config.authType) {
|
|
case AUTH_ENCRYPT:
|
|
/* So drop to OPEN */
|
|
apriv->config.authType = AUTH_OPEN;
|
|
break;
|
|
case AUTH_SHAREDKEY:
|
|
if (apriv->keyindex < auto_wep) {
|
|
set_wep_key(apriv, apriv->keyindex, NULL, 0, 0, 0);
|
|
apriv->config.authType = AUTH_SHAREDKEY;
|
|
apriv->keyindex++;
|
|
} else {
|
|
/* Drop to ENCRYPT */
|
|
apriv->keyindex = 0;
|
|
set_wep_key(apriv, apriv->defindex, NULL, 0, 0, 0);
|
|
apriv->config.authType = AUTH_ENCRYPT;
|
|
}
|
|
break;
|
|
default: /* We'll escalate to SHAREDKEY */
|
|
apriv->config.authType = AUTH_SHAREDKEY;
|
|
}
|
|
set_bit (FLAG_COMMIT, &apriv->flags);
|
|
writeConfigRid(apriv, 0);
|
|
enable_MAC(apriv, &rsp, 0);
|
|
up(&apriv->sem);
|
|
|
|
/* Schedule check to see if the change worked */
|
|
clear_bit(JOB_AUTOWEP, &apriv->jobs);
|
|
apriv->expires = RUN_AT(HZ*3);
|
|
}
|
|
|
|
#ifdef CONFIG_PCI
|
|
static int __devinit airo_pci_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *pent)
|
|
{
|
|
struct net_device *dev;
|
|
|
|
if (pci_enable_device(pdev))
|
|
return -ENODEV;
|
|
pci_set_master(pdev);
|
|
|
|
if (pdev->device == 0x5000 || pdev->device == 0xa504)
|
|
dev = _init_airo_card(pdev->irq, pdev->resource[0].start, 0, pdev, &pdev->dev);
|
|
else
|
|
dev = _init_airo_card(pdev->irq, pdev->resource[2].start, 0, pdev, &pdev->dev);
|
|
if (!dev)
|
|
return -ENODEV;
|
|
|
|
pci_set_drvdata(pdev, dev);
|
|
return 0;
|
|
}
|
|
|
|
static void __devexit airo_pci_remove(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
|
|
airo_print_info(dev->name, "Unregistering...");
|
|
stop_airo_card(dev, 1);
|
|
}
|
|
|
|
static int airo_pci_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct airo_info *ai = dev->priv;
|
|
Cmd cmd;
|
|
Resp rsp;
|
|
|
|
if ((ai->APList == NULL) &&
|
|
(ai->APList = kmalloc(sizeof(APListRid), GFP_KERNEL)) == NULL)
|
|
return -ENOMEM;
|
|
if ((ai->SSID == NULL) &&
|
|
(ai->SSID = kmalloc(sizeof(SsidRid), GFP_KERNEL)) == NULL)
|
|
return -ENOMEM;
|
|
readAPListRid(ai, ai->APList);
|
|
readSsidRid(ai, ai->SSID);
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
/* the lock will be released at the end of the resume callback */
|
|
if (down_interruptible(&ai->sem))
|
|
return -EAGAIN;
|
|
disable_MAC(ai, 0);
|
|
netif_device_detach(dev);
|
|
ai->power = state;
|
|
cmd.cmd=HOSTSLEEP;
|
|
issuecommand(ai, &cmd, &rsp);
|
|
|
|
pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
|
|
pci_save_state(pdev);
|
|
return pci_set_power_state(pdev, pci_choose_state(pdev, state));
|
|
}
|
|
|
|
static int airo_pci_resume(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct airo_info *ai = dev->priv;
|
|
Resp rsp;
|
|
pci_power_t prev_state = pdev->current_state;
|
|
|
|
pci_set_power_state(pdev, PCI_D0);
|
|
pci_restore_state(pdev);
|
|
pci_enable_wake(pdev, PCI_D0, 0);
|
|
|
|
if (prev_state != PCI_D1) {
|
|
reset_card(dev, 0);
|
|
mpi_init_descriptors(ai);
|
|
setup_card(ai, dev->dev_addr, 0);
|
|
clear_bit(FLAG_RADIO_OFF, &ai->flags);
|
|
clear_bit(FLAG_PENDING_XMIT, &ai->flags);
|
|
} else {
|
|
OUT4500(ai, EVACK, EV_AWAKEN);
|
|
OUT4500(ai, EVACK, EV_AWAKEN);
|
|
msleep(100);
|
|
}
|
|
|
|
set_bit (FLAG_COMMIT, &ai->flags);
|
|
disable_MAC(ai, 0);
|
|
msleep(200);
|
|
if (ai->SSID) {
|
|
writeSsidRid(ai, ai->SSID, 0);
|
|
kfree(ai->SSID);
|
|
ai->SSID = NULL;
|
|
}
|
|
if (ai->APList) {
|
|
writeAPListRid(ai, ai->APList, 0);
|
|
kfree(ai->APList);
|
|
ai->APList = NULL;
|
|
}
|
|
writeConfigRid(ai, 0);
|
|
enable_MAC(ai, &rsp, 0);
|
|
ai->power = PMSG_ON;
|
|
netif_device_attach(dev);
|
|
netif_wake_queue(dev);
|
|
enable_interrupts(ai);
|
|
up(&ai->sem);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int __init airo_init_module( void )
|
|
{
|
|
int i;
|
|
#if 0
|
|
int have_isa_dev = 0;
|
|
#endif
|
|
|
|
airo_entry = create_proc_entry("aironet",
|
|
S_IFDIR | airo_perm,
|
|
proc_root_driver);
|
|
|
|
if (airo_entry) {
|
|
airo_entry->uid = proc_uid;
|
|
airo_entry->gid = proc_gid;
|
|
}
|
|
|
|
for( i = 0; i < 4 && io[i] && irq[i]; i++ ) {
|
|
airo_print_info("", "Trying to configure ISA adapter at irq=%d "
|
|
"io=0x%x", irq[i], io[i] );
|
|
if (init_airo_card( irq[i], io[i], 0, NULL ))
|
|
#if 0
|
|
have_isa_dev = 1;
|
|
#else
|
|
/* do nothing */ ;
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_PCI
|
|
airo_print_info("", "Probing for PCI adapters");
|
|
i = pci_register_driver(&airo_driver);
|
|
airo_print_info("", "Finished probing for PCI adapters");
|
|
|
|
if (i) {
|
|
remove_proc_entry("aironet", proc_root_driver);
|
|
return i;
|
|
}
|
|
#endif
|
|
|
|
/* Always exit with success, as we are a library module
|
|
* as well as a driver module
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
static void __exit airo_cleanup_module( void )
|
|
{
|
|
struct airo_info *ai;
|
|
while(!list_empty(&airo_devices)) {
|
|
ai = list_entry(airo_devices.next, struct airo_info, dev_list);
|
|
airo_print_info(ai->dev->name, "Unregistering...");
|
|
stop_airo_card(ai->dev, 1);
|
|
}
|
|
#ifdef CONFIG_PCI
|
|
pci_unregister_driver(&airo_driver);
|
|
#endif
|
|
remove_proc_entry("aironet", proc_root_driver);
|
|
}
|
|
|
|
/*
|
|
* Initial Wireless Extension code for Aironet driver by :
|
|
* Jean Tourrilhes <jt@hpl.hp.com> - HPL - 17 November 00
|
|
* Conversion to new driver API by :
|
|
* Jean Tourrilhes <jt@hpl.hp.com> - HPL - 26 March 02
|
|
* Javier also did a good amount of work here, adding some new extensions
|
|
* and fixing my code. Let's just say that without him this code just
|
|
* would not work at all... - Jean II
|
|
*/
|
|
|
|
static u8 airo_rssi_to_dbm (tdsRssiEntry *rssi_rid, u8 rssi)
|
|
{
|
|
if( !rssi_rid )
|
|
return 0;
|
|
|
|
return (0x100 - rssi_rid[rssi].rssidBm);
|
|
}
|
|
|
|
static u8 airo_dbm_to_pct (tdsRssiEntry *rssi_rid, u8 dbm)
|
|
{
|
|
int i;
|
|
|
|
if( !rssi_rid )
|
|
return 0;
|
|
|
|
for( i = 0; i < 256; i++ )
|
|
if (rssi_rid[i].rssidBm == dbm)
|
|
return rssi_rid[i].rssipct;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int airo_get_quality (StatusRid *status_rid, CapabilityRid *cap_rid)
|
|
{
|
|
int quality = 0;
|
|
|
|
if ((status_rid->mode & 0x3f) == 0x3f && (cap_rid->hardCap & 8)) {
|
|
if (memcmp(cap_rid->prodName, "350", 3))
|
|
if (status_rid->signalQuality > 0x20)
|
|
quality = 0;
|
|
else
|
|
quality = 0x20 - status_rid->signalQuality;
|
|
else
|
|
if (status_rid->signalQuality > 0xb0)
|
|
quality = 0;
|
|
else if (status_rid->signalQuality < 0x10)
|
|
quality = 0xa0;
|
|
else
|
|
quality = 0xb0 - status_rid->signalQuality;
|
|
}
|
|
return quality;
|
|
}
|
|
|
|
#define airo_get_max_quality(cap_rid) (memcmp((cap_rid)->prodName, "350", 3) ? 0x20 : 0xa0)
|
|
#define airo_get_avg_quality(cap_rid) (memcmp((cap_rid)->prodName, "350", 3) ? 0x10 : 0x50);
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : get protocol name
|
|
*/
|
|
static int airo_get_name(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
char *cwrq,
|
|
char *extra)
|
|
{
|
|
strcpy(cwrq, "IEEE 802.11-DS");
|
|
return 0;
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : set frequency
|
|
*/
|
|
static int airo_set_freq(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_freq *fwrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
int rc = -EINPROGRESS; /* Call commit handler */
|
|
|
|
/* If setting by frequency, convert to a channel */
|
|
if((fwrq->e == 1) &&
|
|
(fwrq->m >= (int) 2.412e8) &&
|
|
(fwrq->m <= (int) 2.487e8)) {
|
|
int f = fwrq->m / 100000;
|
|
int c = 0;
|
|
while((c < 14) && (f != frequency_list[c]))
|
|
c++;
|
|
/* Hack to fall through... */
|
|
fwrq->e = 0;
|
|
fwrq->m = c + 1;
|
|
}
|
|
/* Setting by channel number */
|
|
if((fwrq->m > 1000) || (fwrq->e > 0))
|
|
rc = -EOPNOTSUPP;
|
|
else {
|
|
int channel = fwrq->m;
|
|
/* We should do a better check than that,
|
|
* based on the card capability !!! */
|
|
if((channel < 1) || (channel > 14)) {
|
|
airo_print_dbg(dev->name, "New channel value of %d is invalid!",
|
|
fwrq->m);
|
|
rc = -EINVAL;
|
|
} else {
|
|
readConfigRid(local, 1);
|
|
/* Yes ! We can set it !!! */
|
|
local->config.channelSet = (u16) channel;
|
|
set_bit (FLAG_COMMIT, &local->flags);
|
|
}
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : get frequency
|
|
*/
|
|
static int airo_get_freq(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_freq *fwrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
StatusRid status_rid; /* Card status info */
|
|
int ch;
|
|
|
|
readConfigRid(local, 1);
|
|
if ((local->config.opmode & 0xFF) == MODE_STA_ESS)
|
|
status_rid.channel = local->config.channelSet;
|
|
else
|
|
readStatusRid(local, &status_rid, 1);
|
|
|
|
ch = (int)status_rid.channel;
|
|
if((ch > 0) && (ch < 15)) {
|
|
fwrq->m = frequency_list[ch - 1] * 100000;
|
|
fwrq->e = 1;
|
|
} else {
|
|
fwrq->m = ch;
|
|
fwrq->e = 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : set ESSID
|
|
*/
|
|
static int airo_set_essid(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_point *dwrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
Resp rsp;
|
|
SsidRid SSID_rid; /* SSIDs */
|
|
|
|
/* Reload the list of current SSID */
|
|
readSsidRid(local, &SSID_rid);
|
|
|
|
/* Check if we asked for `any' */
|
|
if(dwrq->flags == 0) {
|
|
/* Just send an empty SSID list */
|
|
memset(&SSID_rid, 0, sizeof(SSID_rid));
|
|
} else {
|
|
int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
|
|
|
|
/* Check the size of the string */
|
|
if(dwrq->length > IW_ESSID_MAX_SIZE) {
|
|
return -E2BIG ;
|
|
}
|
|
/* Check if index is valid */
|
|
if((index < 0) || (index >= 4)) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Set the SSID */
|
|
memset(SSID_rid.ssids[index].ssid, 0,
|
|
sizeof(SSID_rid.ssids[index].ssid));
|
|
memcpy(SSID_rid.ssids[index].ssid, extra, dwrq->length);
|
|
SSID_rid.ssids[index].len = dwrq->length;
|
|
}
|
|
SSID_rid.len = sizeof(SSID_rid);
|
|
/* Write it to the card */
|
|
disable_MAC(local, 1);
|
|
writeSsidRid(local, &SSID_rid, 1);
|
|
enable_MAC(local, &rsp, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : get ESSID
|
|
*/
|
|
static int airo_get_essid(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_point *dwrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
StatusRid status_rid; /* Card status info */
|
|
|
|
readStatusRid(local, &status_rid, 1);
|
|
|
|
/* Note : if dwrq->flags != 0, we should
|
|
* get the relevant SSID from the SSID list... */
|
|
|
|
/* Get the current SSID */
|
|
memcpy(extra, status_rid.SSID, status_rid.SSIDlen);
|
|
/* If none, we may want to get the one that was set */
|
|
|
|
/* Push it out ! */
|
|
dwrq->length = status_rid.SSIDlen;
|
|
dwrq->flags = 1; /* active */
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : set AP address
|
|
*/
|
|
static int airo_set_wap(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct sockaddr *awrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
Cmd cmd;
|
|
Resp rsp;
|
|
APListRid APList_rid;
|
|
static const u8 any[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
|
|
static const u8 off[ETH_ALEN] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
|
|
|
|
if (awrq->sa_family != ARPHRD_ETHER)
|
|
return -EINVAL;
|
|
else if (!memcmp(any, awrq->sa_data, ETH_ALEN) ||
|
|
!memcmp(off, awrq->sa_data, ETH_ALEN)) {
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
cmd.cmd=CMD_LOSE_SYNC;
|
|
if (down_interruptible(&local->sem))
|
|
return -ERESTARTSYS;
|
|
issuecommand(local, &cmd, &rsp);
|
|
up(&local->sem);
|
|
} else {
|
|
memset(&APList_rid, 0, sizeof(APList_rid));
|
|
APList_rid.len = sizeof(APList_rid);
|
|
memcpy(APList_rid.ap[0], awrq->sa_data, ETH_ALEN);
|
|
disable_MAC(local, 1);
|
|
writeAPListRid(local, &APList_rid, 1);
|
|
enable_MAC(local, &rsp, 1);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : get AP address
|
|
*/
|
|
static int airo_get_wap(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct sockaddr *awrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
StatusRid status_rid; /* Card status info */
|
|
|
|
readStatusRid(local, &status_rid, 1);
|
|
|
|
/* Tentative. This seems to work, wow, I'm lucky !!! */
|
|
memcpy(awrq->sa_data, status_rid.bssid[0], ETH_ALEN);
|
|
awrq->sa_family = ARPHRD_ETHER;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : set Nickname
|
|
*/
|
|
static int airo_set_nick(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_point *dwrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
|
|
/* Check the size of the string */
|
|
if(dwrq->length > 16) {
|
|
return -E2BIG;
|
|
}
|
|
readConfigRid(local, 1);
|
|
memset(local->config.nodeName, 0, sizeof(local->config.nodeName));
|
|
memcpy(local->config.nodeName, extra, dwrq->length);
|
|
set_bit (FLAG_COMMIT, &local->flags);
|
|
|
|
return -EINPROGRESS; /* Call commit handler */
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : get Nickname
|
|
*/
|
|
static int airo_get_nick(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_point *dwrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
|
|
readConfigRid(local, 1);
|
|
strncpy(extra, local->config.nodeName, 16);
|
|
extra[16] = '\0';
|
|
dwrq->length = strlen(extra);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : set Bit-Rate
|
|
*/
|
|
static int airo_set_rate(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_param *vwrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
CapabilityRid cap_rid; /* Card capability info */
|
|
u8 brate = 0;
|
|
int i;
|
|
|
|
/* First : get a valid bit rate value */
|
|
readCapabilityRid(local, &cap_rid, 1);
|
|
|
|
/* Which type of value ? */
|
|
if((vwrq->value < 8) && (vwrq->value >= 0)) {
|
|
/* Setting by rate index */
|
|
/* Find value in the magic rate table */
|
|
brate = cap_rid.supportedRates[vwrq->value];
|
|
} else {
|
|
/* Setting by frequency value */
|
|
u8 normvalue = (u8) (vwrq->value/500000);
|
|
|
|
/* Check if rate is valid */
|
|
for(i = 0 ; i < 8 ; i++) {
|
|
if(normvalue == cap_rid.supportedRates[i]) {
|
|
brate = normvalue;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
/* -1 designed the max rate (mostly auto mode) */
|
|
if(vwrq->value == -1) {
|
|
/* Get the highest available rate */
|
|
for(i = 0 ; i < 8 ; i++) {
|
|
if(cap_rid.supportedRates[i] == 0)
|
|
break;
|
|
}
|
|
if(i != 0)
|
|
brate = cap_rid.supportedRates[i - 1];
|
|
}
|
|
/* Check that it is valid */
|
|
if(brate == 0) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
readConfigRid(local, 1);
|
|
/* Now, check if we want a fixed or auto value */
|
|
if(vwrq->fixed == 0) {
|
|
/* Fill all the rates up to this max rate */
|
|
memset(local->config.rates, 0, 8);
|
|
for(i = 0 ; i < 8 ; i++) {
|
|
local->config.rates[i] = cap_rid.supportedRates[i];
|
|
if(local->config.rates[i] == brate)
|
|
break;
|
|
}
|
|
} else {
|
|
/* Fixed mode */
|
|
/* One rate, fixed */
|
|
memset(local->config.rates, 0, 8);
|
|
local->config.rates[0] = brate;
|
|
}
|
|
set_bit (FLAG_COMMIT, &local->flags);
|
|
|
|
return -EINPROGRESS; /* Call commit handler */
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : get Bit-Rate
|
|
*/
|
|
static int airo_get_rate(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_param *vwrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
StatusRid status_rid; /* Card status info */
|
|
|
|
readStatusRid(local, &status_rid, 1);
|
|
|
|
vwrq->value = status_rid.currentXmitRate * 500000;
|
|
/* If more than one rate, set auto */
|
|
readConfigRid(local, 1);
|
|
vwrq->fixed = (local->config.rates[1] == 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : set RTS threshold
|
|
*/
|
|
static int airo_set_rts(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_param *vwrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
int rthr = vwrq->value;
|
|
|
|
if(vwrq->disabled)
|
|
rthr = AIRO_DEF_MTU;
|
|
if((rthr < 0) || (rthr > AIRO_DEF_MTU)) {
|
|
return -EINVAL;
|
|
}
|
|
readConfigRid(local, 1);
|
|
local->config.rtsThres = rthr;
|
|
set_bit (FLAG_COMMIT, &local->flags);
|
|
|
|
return -EINPROGRESS; /* Call commit handler */
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : get RTS threshold
|
|
*/
|
|
static int airo_get_rts(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_param *vwrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
|
|
readConfigRid(local, 1);
|
|
vwrq->value = local->config.rtsThres;
|
|
vwrq->disabled = (vwrq->value >= AIRO_DEF_MTU);
|
|
vwrq->fixed = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : set Fragmentation threshold
|
|
*/
|
|
static int airo_set_frag(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_param *vwrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
int fthr = vwrq->value;
|
|
|
|
if(vwrq->disabled)
|
|
fthr = AIRO_DEF_MTU;
|
|
if((fthr < 256) || (fthr > AIRO_DEF_MTU)) {
|
|
return -EINVAL;
|
|
}
|
|
fthr &= ~0x1; /* Get an even value - is it really needed ??? */
|
|
readConfigRid(local, 1);
|
|
local->config.fragThresh = (u16)fthr;
|
|
set_bit (FLAG_COMMIT, &local->flags);
|
|
|
|
return -EINPROGRESS; /* Call commit handler */
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : get Fragmentation threshold
|
|
*/
|
|
static int airo_get_frag(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_param *vwrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
|
|
readConfigRid(local, 1);
|
|
vwrq->value = local->config.fragThresh;
|
|
vwrq->disabled = (vwrq->value >= AIRO_DEF_MTU);
|
|
vwrq->fixed = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : set Mode of Operation
|
|
*/
|
|
static int airo_set_mode(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
__u32 *uwrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
int reset = 0;
|
|
|
|
readConfigRid(local, 1);
|
|
if ((local->config.rmode & 0xff) >= RXMODE_RFMON)
|
|
reset = 1;
|
|
|
|
switch(*uwrq) {
|
|
case IW_MODE_ADHOC:
|
|
local->config.opmode &= 0xFF00;
|
|
local->config.opmode |= MODE_STA_IBSS;
|
|
local->config.rmode &= 0xfe00;
|
|
local->config.scanMode = SCANMODE_ACTIVE;
|
|
clear_bit (FLAG_802_11, &local->flags);
|
|
break;
|
|
case IW_MODE_INFRA:
|
|
local->config.opmode &= 0xFF00;
|
|
local->config.opmode |= MODE_STA_ESS;
|
|
local->config.rmode &= 0xfe00;
|
|
local->config.scanMode = SCANMODE_ACTIVE;
|
|
clear_bit (FLAG_802_11, &local->flags);
|
|
break;
|
|
case IW_MODE_MASTER:
|
|
local->config.opmode &= 0xFF00;
|
|
local->config.opmode |= MODE_AP;
|
|
local->config.rmode &= 0xfe00;
|
|
local->config.scanMode = SCANMODE_ACTIVE;
|
|
clear_bit (FLAG_802_11, &local->flags);
|
|
break;
|
|
case IW_MODE_REPEAT:
|
|
local->config.opmode &= 0xFF00;
|
|
local->config.opmode |= MODE_AP_RPTR;
|
|
local->config.rmode &= 0xfe00;
|
|
local->config.scanMode = SCANMODE_ACTIVE;
|
|
clear_bit (FLAG_802_11, &local->flags);
|
|
break;
|
|
case IW_MODE_MONITOR:
|
|
local->config.opmode &= 0xFF00;
|
|
local->config.opmode |= MODE_STA_ESS;
|
|
local->config.rmode &= 0xfe00;
|
|
local->config.rmode |= RXMODE_RFMON | RXMODE_DISABLE_802_3_HEADER;
|
|
local->config.scanMode = SCANMODE_PASSIVE;
|
|
set_bit (FLAG_802_11, &local->flags);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
if (reset)
|
|
set_bit (FLAG_RESET, &local->flags);
|
|
set_bit (FLAG_COMMIT, &local->flags);
|
|
|
|
return -EINPROGRESS; /* Call commit handler */
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : get Mode of Operation
|
|
*/
|
|
static int airo_get_mode(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
__u32 *uwrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
|
|
readConfigRid(local, 1);
|
|
/* If not managed, assume it's ad-hoc */
|
|
switch (local->config.opmode & 0xFF) {
|
|
case MODE_STA_ESS:
|
|
*uwrq = IW_MODE_INFRA;
|
|
break;
|
|
case MODE_AP:
|
|
*uwrq = IW_MODE_MASTER;
|
|
break;
|
|
case MODE_AP_RPTR:
|
|
*uwrq = IW_MODE_REPEAT;
|
|
break;
|
|
default:
|
|
*uwrq = IW_MODE_ADHOC;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : set Encryption Key
|
|
*/
|
|
static int airo_set_encode(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_point *dwrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
CapabilityRid cap_rid; /* Card capability info */
|
|
int perm = ( dwrq->flags & IW_ENCODE_TEMP ? 0 : 1 );
|
|
u16 currentAuthType = local->config.authType;
|
|
|
|
/* Is WEP supported ? */
|
|
readCapabilityRid(local, &cap_rid, 1);
|
|
/* Older firmware doesn't support this...
|
|
if(!(cap_rid.softCap & 2)) {
|
|
return -EOPNOTSUPP;
|
|
} */
|
|
readConfigRid(local, 1);
|
|
|
|
/* Basic checking: do we have a key to set ?
|
|
* Note : with the new API, it's impossible to get a NULL pointer.
|
|
* Therefore, we need to check a key size == 0 instead.
|
|
* New version of iwconfig properly set the IW_ENCODE_NOKEY flag
|
|
* when no key is present (only change flags), but older versions
|
|
* don't do it. - Jean II */
|
|
if (dwrq->length > 0) {
|
|
wep_key_t key;
|
|
int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
|
|
int current_index = get_wep_key(local, 0xffff);
|
|
/* Check the size of the key */
|
|
if (dwrq->length > MAX_KEY_SIZE) {
|
|
return -EINVAL;
|
|
}
|
|
/* Check the index (none -> use current) */
|
|
if ((index < 0) || (index >= ((cap_rid.softCap & 0x80) ? 4:1)))
|
|
index = current_index;
|
|
/* Set the length */
|
|
if (dwrq->length > MIN_KEY_SIZE)
|
|
key.len = MAX_KEY_SIZE;
|
|
else
|
|
if (dwrq->length > 0)
|
|
key.len = MIN_KEY_SIZE;
|
|
else
|
|
/* Disable the key */
|
|
key.len = 0;
|
|
/* Check if the key is not marked as invalid */
|
|
if(!(dwrq->flags & IW_ENCODE_NOKEY)) {
|
|
/* Cleanup */
|
|
memset(key.key, 0, MAX_KEY_SIZE);
|
|
/* Copy the key in the driver */
|
|
memcpy(key.key, extra, dwrq->length);
|
|
/* Send the key to the card */
|
|
set_wep_key(local, index, key.key, key.len, perm, 1);
|
|
}
|
|
/* WE specify that if a valid key is set, encryption
|
|
* should be enabled (user may turn it off later)
|
|
* This is also how "iwconfig ethX key on" works */
|
|
if((index == current_index) && (key.len > 0) &&
|
|
(local->config.authType == AUTH_OPEN)) {
|
|
local->config.authType = AUTH_ENCRYPT;
|
|
}
|
|
} else {
|
|
/* Do we want to just set the transmit key index ? */
|
|
int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
|
|
if ((index >= 0) && (index < ((cap_rid.softCap & 0x80)?4:1))) {
|
|
set_wep_key(local, index, NULL, 0, perm, 1);
|
|
} else
|
|
/* Don't complain if only change the mode */
|
|
if(!dwrq->flags & IW_ENCODE_MODE) {
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
/* Read the flags */
|
|
if(dwrq->flags & IW_ENCODE_DISABLED)
|
|
local->config.authType = AUTH_OPEN; // disable encryption
|
|
if(dwrq->flags & IW_ENCODE_RESTRICTED)
|
|
local->config.authType = AUTH_SHAREDKEY; // Only Both
|
|
if(dwrq->flags & IW_ENCODE_OPEN)
|
|
local->config.authType = AUTH_ENCRYPT; // Only Wep
|
|
/* Commit the changes to flags if needed */
|
|
if (local->config.authType != currentAuthType)
|
|
set_bit (FLAG_COMMIT, &local->flags);
|
|
return -EINPROGRESS; /* Call commit handler */
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : get Encryption Key
|
|
*/
|
|
static int airo_get_encode(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_point *dwrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
|
|
CapabilityRid cap_rid; /* Card capability info */
|
|
|
|
/* Is it supported ? */
|
|
readCapabilityRid(local, &cap_rid, 1);
|
|
if(!(cap_rid.softCap & 2)) {
|
|
return -EOPNOTSUPP;
|
|
}
|
|
readConfigRid(local, 1);
|
|
/* Check encryption mode */
|
|
switch(local->config.authType) {
|
|
case AUTH_ENCRYPT:
|
|
dwrq->flags = IW_ENCODE_OPEN;
|
|
break;
|
|
case AUTH_SHAREDKEY:
|
|
dwrq->flags = IW_ENCODE_RESTRICTED;
|
|
break;
|
|
default:
|
|
case AUTH_OPEN:
|
|
dwrq->flags = IW_ENCODE_DISABLED;
|
|
break;
|
|
}
|
|
/* We can't return the key, so set the proper flag and return zero */
|
|
dwrq->flags |= IW_ENCODE_NOKEY;
|
|
memset(extra, 0, 16);
|
|
|
|
/* Which key do we want ? -1 -> tx index */
|
|
if ((index < 0) || (index >= ((cap_rid.softCap & 0x80) ? 4 : 1)))
|
|
index = get_wep_key(local, 0xffff);
|
|
dwrq->flags |= index + 1;
|
|
/* Copy the key to the user buffer */
|
|
dwrq->length = get_wep_key(local, index);
|
|
if (dwrq->length > 16) {
|
|
dwrq->length=0;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : set extended Encryption parameters
|
|
*/
|
|
static int airo_set_encodeext(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
union iwreq_data *wrqu,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
struct iw_point *encoding = &wrqu->encoding;
|
|
struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
|
|
CapabilityRid cap_rid; /* Card capability info */
|
|
int perm = ( encoding->flags & IW_ENCODE_TEMP ? 0 : 1 );
|
|
u16 currentAuthType = local->config.authType;
|
|
int idx, key_len, alg = ext->alg, set_key = 1;
|
|
wep_key_t key;
|
|
|
|
/* Is WEP supported ? */
|
|
readCapabilityRid(local, &cap_rid, 1);
|
|
/* Older firmware doesn't support this...
|
|
if(!(cap_rid.softCap & 2)) {
|
|
return -EOPNOTSUPP;
|
|
} */
|
|
readConfigRid(local, 1);
|
|
|
|
/* Determine and validate the key index */
|
|
idx = encoding->flags & IW_ENCODE_INDEX;
|
|
if (idx) {
|
|
if (idx < 1 || idx > ((cap_rid.softCap & 0x80) ? 4:1))
|
|
return -EINVAL;
|
|
idx--;
|
|
} else
|
|
idx = get_wep_key(local, 0xffff);
|
|
|
|
if (encoding->flags & IW_ENCODE_DISABLED)
|
|
alg = IW_ENCODE_ALG_NONE;
|
|
|
|
if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
|
|
/* Only set transmit key index here, actual
|
|
* key is set below if needed.
|
|
*/
|
|
set_wep_key(local, idx, NULL, 0, perm, 1);
|
|
set_key = ext->key_len > 0 ? 1 : 0;
|
|
}
|
|
|
|
if (set_key) {
|
|
/* Set the requested key first */
|
|
memset(key.key, 0, MAX_KEY_SIZE);
|
|
switch (alg) {
|
|
case IW_ENCODE_ALG_NONE:
|
|
key.len = 0;
|
|
break;
|
|
case IW_ENCODE_ALG_WEP:
|
|
if (ext->key_len > MIN_KEY_SIZE) {
|
|
key.len = MAX_KEY_SIZE;
|
|
} else if (ext->key_len > 0) {
|
|
key.len = MIN_KEY_SIZE;
|
|
} else {
|
|
return -EINVAL;
|
|
}
|
|
key_len = min (ext->key_len, key.len);
|
|
memcpy(key.key, ext->key, key_len);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
/* Send the key to the card */
|
|
set_wep_key(local, idx, key.key, key.len, perm, 1);
|
|
}
|
|
|
|
/* Read the flags */
|
|
if(encoding->flags & IW_ENCODE_DISABLED)
|
|
local->config.authType = AUTH_OPEN; // disable encryption
|
|
if(encoding->flags & IW_ENCODE_RESTRICTED)
|
|
local->config.authType = AUTH_SHAREDKEY; // Only Both
|
|
if(encoding->flags & IW_ENCODE_OPEN)
|
|
local->config.authType = AUTH_ENCRYPT; // Only Wep
|
|
/* Commit the changes to flags if needed */
|
|
if (local->config.authType != currentAuthType)
|
|
set_bit (FLAG_COMMIT, &local->flags);
|
|
|
|
return -EINPROGRESS;
|
|
}
|
|
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : get extended Encryption parameters
|
|
*/
|
|
static int airo_get_encodeext(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
union iwreq_data *wrqu,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
struct iw_point *encoding = &wrqu->encoding;
|
|
struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
|
|
CapabilityRid cap_rid; /* Card capability info */
|
|
int idx, max_key_len;
|
|
|
|
/* Is it supported ? */
|
|
readCapabilityRid(local, &cap_rid, 1);
|
|
if(!(cap_rid.softCap & 2)) {
|
|
return -EOPNOTSUPP;
|
|
}
|
|
readConfigRid(local, 1);
|
|
|
|
max_key_len = encoding->length - sizeof(*ext);
|
|
if (max_key_len < 0)
|
|
return -EINVAL;
|
|
|
|
idx = encoding->flags & IW_ENCODE_INDEX;
|
|
if (idx) {
|
|
if (idx < 1 || idx > ((cap_rid.softCap & 0x80) ? 4:1))
|
|
return -EINVAL;
|
|
idx--;
|
|
} else
|
|
idx = get_wep_key(local, 0xffff);
|
|
|
|
encoding->flags = idx + 1;
|
|
memset(ext, 0, sizeof(*ext));
|
|
|
|
/* Check encryption mode */
|
|
switch(local->config.authType) {
|
|
case AUTH_ENCRYPT:
|
|
encoding->flags = IW_ENCODE_ALG_WEP | IW_ENCODE_ENABLED;
|
|
break;
|
|
case AUTH_SHAREDKEY:
|
|
encoding->flags = IW_ENCODE_ALG_WEP | IW_ENCODE_ENABLED;
|
|
break;
|
|
default:
|
|
case AUTH_OPEN:
|
|
encoding->flags = IW_ENCODE_ALG_NONE | IW_ENCODE_DISABLED;
|
|
break;
|
|
}
|
|
/* We can't return the key, so set the proper flag and return zero */
|
|
encoding->flags |= IW_ENCODE_NOKEY;
|
|
memset(extra, 0, 16);
|
|
|
|
/* Copy the key to the user buffer */
|
|
ext->key_len = get_wep_key(local, idx);
|
|
if (ext->key_len > 16) {
|
|
ext->key_len=0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : set extended authentication parameters
|
|
*/
|
|
static int airo_set_auth(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
union iwreq_data *wrqu, char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
struct iw_param *param = &wrqu->param;
|
|
u16 currentAuthType = local->config.authType;
|
|
|
|
switch (param->flags & IW_AUTH_INDEX) {
|
|
case IW_AUTH_WPA_VERSION:
|
|
case IW_AUTH_CIPHER_PAIRWISE:
|
|
case IW_AUTH_CIPHER_GROUP:
|
|
case IW_AUTH_KEY_MGMT:
|
|
case IW_AUTH_RX_UNENCRYPTED_EAPOL:
|
|
case IW_AUTH_PRIVACY_INVOKED:
|
|
/*
|
|
* airo does not use these parameters
|
|
*/
|
|
break;
|
|
|
|
case IW_AUTH_DROP_UNENCRYPTED:
|
|
if (param->value) {
|
|
/* Only change auth type if unencrypted */
|
|
if (currentAuthType == AUTH_OPEN)
|
|
local->config.authType = AUTH_ENCRYPT;
|
|
} else {
|
|
local->config.authType = AUTH_OPEN;
|
|
}
|
|
|
|
/* Commit the changes to flags if needed */
|
|
if (local->config.authType != currentAuthType)
|
|
set_bit (FLAG_COMMIT, &local->flags);
|
|
break;
|
|
|
|
case IW_AUTH_80211_AUTH_ALG: {
|
|
/* FIXME: What about AUTH_OPEN? This API seems to
|
|
* disallow setting our auth to AUTH_OPEN.
|
|
*/
|
|
if (param->value & IW_AUTH_ALG_SHARED_KEY) {
|
|
local->config.authType = AUTH_SHAREDKEY;
|
|
} else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) {
|
|
local->config.authType = AUTH_ENCRYPT;
|
|
} else
|
|
return -EINVAL;
|
|
break;
|
|
|
|
/* Commit the changes to flags if needed */
|
|
if (local->config.authType != currentAuthType)
|
|
set_bit (FLAG_COMMIT, &local->flags);
|
|
}
|
|
|
|
case IW_AUTH_WPA_ENABLED:
|
|
/* Silently accept disable of WPA */
|
|
if (param->value > 0)
|
|
return -EOPNOTSUPP;
|
|
break;
|
|
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
return -EINPROGRESS;
|
|
}
|
|
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : get extended authentication parameters
|
|
*/
|
|
static int airo_get_auth(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
union iwreq_data *wrqu, char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
struct iw_param *param = &wrqu->param;
|
|
u16 currentAuthType = local->config.authType;
|
|
|
|
switch (param->flags & IW_AUTH_INDEX) {
|
|
case IW_AUTH_DROP_UNENCRYPTED:
|
|
switch (currentAuthType) {
|
|
case AUTH_SHAREDKEY:
|
|
case AUTH_ENCRYPT:
|
|
param->value = 1;
|
|
break;
|
|
default:
|
|
param->value = 0;
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case IW_AUTH_80211_AUTH_ALG:
|
|
switch (currentAuthType) {
|
|
case AUTH_SHAREDKEY:
|
|
param->value = IW_AUTH_ALG_SHARED_KEY;
|
|
break;
|
|
case AUTH_ENCRYPT:
|
|
default:
|
|
param->value = IW_AUTH_ALG_OPEN_SYSTEM;
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case IW_AUTH_WPA_ENABLED:
|
|
param->value = 0;
|
|
break;
|
|
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : set Tx-Power
|
|
*/
|
|
static int airo_set_txpow(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_param *vwrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
CapabilityRid cap_rid; /* Card capability info */
|
|
int i;
|
|
int rc = -EINVAL;
|
|
|
|
readCapabilityRid(local, &cap_rid, 1);
|
|
|
|
if (vwrq->disabled) {
|
|
set_bit (FLAG_RADIO_OFF, &local->flags);
|
|
set_bit (FLAG_COMMIT, &local->flags);
|
|
return -EINPROGRESS; /* Call commit handler */
|
|
}
|
|
if (vwrq->flags != IW_TXPOW_MWATT) {
|
|
return -EINVAL;
|
|
}
|
|
clear_bit (FLAG_RADIO_OFF, &local->flags);
|
|
for (i = 0; cap_rid.txPowerLevels[i] && (i < 8); i++)
|
|
if ((vwrq->value==cap_rid.txPowerLevels[i])) {
|
|
readConfigRid(local, 1);
|
|
local->config.txPower = vwrq->value;
|
|
set_bit (FLAG_COMMIT, &local->flags);
|
|
rc = -EINPROGRESS; /* Call commit handler */
|
|
break;
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : get Tx-Power
|
|
*/
|
|
static int airo_get_txpow(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_param *vwrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
|
|
readConfigRid(local, 1);
|
|
vwrq->value = local->config.txPower;
|
|
vwrq->fixed = 1; /* No power control */
|
|
vwrq->disabled = test_bit(FLAG_RADIO_OFF, &local->flags);
|
|
vwrq->flags = IW_TXPOW_MWATT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : set Retry limits
|
|
*/
|
|
static int airo_set_retry(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_param *vwrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
int rc = -EINVAL;
|
|
|
|
if(vwrq->disabled) {
|
|
return -EINVAL;
|
|
}
|
|
readConfigRid(local, 1);
|
|
if(vwrq->flags & IW_RETRY_LIMIT) {
|
|
if(vwrq->flags & IW_RETRY_LONG)
|
|
local->config.longRetryLimit = vwrq->value;
|
|
else if (vwrq->flags & IW_RETRY_SHORT)
|
|
local->config.shortRetryLimit = vwrq->value;
|
|
else {
|
|
/* No modifier : set both */
|
|
local->config.longRetryLimit = vwrq->value;
|
|
local->config.shortRetryLimit = vwrq->value;
|
|
}
|
|
set_bit (FLAG_COMMIT, &local->flags);
|
|
rc = -EINPROGRESS; /* Call commit handler */
|
|
}
|
|
if(vwrq->flags & IW_RETRY_LIFETIME) {
|
|
local->config.txLifetime = vwrq->value / 1024;
|
|
set_bit (FLAG_COMMIT, &local->flags);
|
|
rc = -EINPROGRESS; /* Call commit handler */
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : get Retry limits
|
|
*/
|
|
static int airo_get_retry(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_param *vwrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
|
|
vwrq->disabled = 0; /* Can't be disabled */
|
|
|
|
readConfigRid(local, 1);
|
|
/* Note : by default, display the min retry number */
|
|
if((vwrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) {
|
|
vwrq->flags = IW_RETRY_LIFETIME;
|
|
vwrq->value = (int)local->config.txLifetime * 1024;
|
|
} else if((vwrq->flags & IW_RETRY_LONG)) {
|
|
vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_LONG;
|
|
vwrq->value = (int)local->config.longRetryLimit;
|
|
} else {
|
|
vwrq->flags = IW_RETRY_LIMIT;
|
|
vwrq->value = (int)local->config.shortRetryLimit;
|
|
if((int)local->config.shortRetryLimit != (int)local->config.longRetryLimit)
|
|
vwrq->flags |= IW_RETRY_SHORT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : get range info
|
|
*/
|
|
static int airo_get_range(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_point *dwrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
struct iw_range *range = (struct iw_range *) extra;
|
|
CapabilityRid cap_rid; /* Card capability info */
|
|
int i;
|
|
int k;
|
|
|
|
readCapabilityRid(local, &cap_rid, 1);
|
|
|
|
dwrq->length = sizeof(struct iw_range);
|
|
memset(range, 0, sizeof(*range));
|
|
range->min_nwid = 0x0000;
|
|
range->max_nwid = 0x0000;
|
|
range->num_channels = 14;
|
|
/* Should be based on cap_rid.country to give only
|
|
* what the current card support */
|
|
k = 0;
|
|
for(i = 0; i < 14; i++) {
|
|
range->freq[k].i = i + 1; /* List index */
|
|
range->freq[k].m = frequency_list[i] * 100000;
|
|
range->freq[k++].e = 1; /* Values in table in MHz -> * 10^5 * 10 */
|
|
}
|
|
range->num_frequency = k;
|
|
|
|
range->sensitivity = 65535;
|
|
|
|
/* Hum... Should put the right values there */
|
|
if (local->rssi)
|
|
range->max_qual.qual = 100; /* % */
|
|
else
|
|
range->max_qual.qual = airo_get_max_quality(&cap_rid);
|
|
range->max_qual.level = 0x100 - 120; /* -120 dBm */
|
|
range->max_qual.noise = 0x100 - 120; /* -120 dBm */
|
|
|
|
/* Experimental measurements - boundary 11/5.5 Mb/s */
|
|
/* Note : with or without the (local->rssi), results
|
|
* are somewhat different. - Jean II */
|
|
if (local->rssi) {
|
|
range->avg_qual.qual = 50; /* % */
|
|
range->avg_qual.level = 0x100 - 70; /* -70 dBm */
|
|
} else {
|
|
range->avg_qual.qual = airo_get_avg_quality(&cap_rid);
|
|
range->avg_qual.level = 0x100 - 80; /* -80 dBm */
|
|
}
|
|
range->avg_qual.noise = 0x100 - 85; /* -85 dBm */
|
|
|
|
for(i = 0 ; i < 8 ; i++) {
|
|
range->bitrate[i] = cap_rid.supportedRates[i] * 500000;
|
|
if(range->bitrate[i] == 0)
|
|
break;
|
|
}
|
|
range->num_bitrates = i;
|
|
|
|
/* Set an indication of the max TCP throughput
|
|
* in bit/s that we can expect using this interface.
|
|
* May be use for QoS stuff... Jean II */
|
|
if(i > 2)
|
|
range->throughput = 5000 * 1000;
|
|
else
|
|
range->throughput = 1500 * 1000;
|
|
|
|
range->min_rts = 0;
|
|
range->max_rts = AIRO_DEF_MTU;
|
|
range->min_frag = 256;
|
|
range->max_frag = AIRO_DEF_MTU;
|
|
|
|
if(cap_rid.softCap & 2) {
|
|
// WEP: RC4 40 bits
|
|
range->encoding_size[0] = 5;
|
|
// RC4 ~128 bits
|
|
if (cap_rid.softCap & 0x100) {
|
|
range->encoding_size[1] = 13;
|
|
range->num_encoding_sizes = 2;
|
|
} else
|
|
range->num_encoding_sizes = 1;
|
|
range->max_encoding_tokens = (cap_rid.softCap & 0x80) ? 4 : 1;
|
|
} else {
|
|
range->num_encoding_sizes = 0;
|
|
range->max_encoding_tokens = 0;
|
|
}
|
|
range->min_pmp = 0;
|
|
range->max_pmp = 5000000; /* 5 secs */
|
|
range->min_pmt = 0;
|
|
range->max_pmt = 65535 * 1024; /* ??? */
|
|
range->pmp_flags = IW_POWER_PERIOD;
|
|
range->pmt_flags = IW_POWER_TIMEOUT;
|
|
range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_ALL_R;
|
|
|
|
/* Transmit Power - values are in mW */
|
|
for(i = 0 ; i < 8 ; i++) {
|
|
range->txpower[i] = cap_rid.txPowerLevels[i];
|
|
if(range->txpower[i] == 0)
|
|
break;
|
|
}
|
|
range->num_txpower = i;
|
|
range->txpower_capa = IW_TXPOW_MWATT;
|
|
range->we_version_source = 19;
|
|
range->we_version_compiled = WIRELESS_EXT;
|
|
range->retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME;
|
|
range->retry_flags = IW_RETRY_LIMIT;
|
|
range->r_time_flags = IW_RETRY_LIFETIME;
|
|
range->min_retry = 1;
|
|
range->max_retry = 65535;
|
|
range->min_r_time = 1024;
|
|
range->max_r_time = 65535 * 1024;
|
|
|
|
/* Event capability (kernel + driver) */
|
|
range->event_capa[0] = (IW_EVENT_CAPA_K_0 |
|
|
IW_EVENT_CAPA_MASK(SIOCGIWTHRSPY) |
|
|
IW_EVENT_CAPA_MASK(SIOCGIWAP) |
|
|
IW_EVENT_CAPA_MASK(SIOCGIWSCAN));
|
|
range->event_capa[1] = IW_EVENT_CAPA_K_1;
|
|
range->event_capa[4] = IW_EVENT_CAPA_MASK(IWEVTXDROP);
|
|
return 0;
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : set Power Management
|
|
*/
|
|
static int airo_set_power(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_param *vwrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
|
|
readConfigRid(local, 1);
|
|
if (vwrq->disabled) {
|
|
if ((local->config.rmode & 0xFF) >= RXMODE_RFMON) {
|
|
return -EINVAL;
|
|
}
|
|
local->config.powerSaveMode = POWERSAVE_CAM;
|
|
local->config.rmode &= 0xFF00;
|
|
local->config.rmode |= RXMODE_BC_MC_ADDR;
|
|
set_bit (FLAG_COMMIT, &local->flags);
|
|
return -EINPROGRESS; /* Call commit handler */
|
|
}
|
|
if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) {
|
|
local->config.fastListenDelay = (vwrq->value + 500) / 1024;
|
|
local->config.powerSaveMode = POWERSAVE_PSPCAM;
|
|
set_bit (FLAG_COMMIT, &local->flags);
|
|
} else if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_PERIOD) {
|
|
local->config.fastListenInterval = local->config.listenInterval = (vwrq->value + 500) / 1024;
|
|
local->config.powerSaveMode = POWERSAVE_PSPCAM;
|
|
set_bit (FLAG_COMMIT, &local->flags);
|
|
}
|
|
switch (vwrq->flags & IW_POWER_MODE) {
|
|
case IW_POWER_UNICAST_R:
|
|
if ((local->config.rmode & 0xFF) >= RXMODE_RFMON) {
|
|
return -EINVAL;
|
|
}
|
|
local->config.rmode &= 0xFF00;
|
|
local->config.rmode |= RXMODE_ADDR;
|
|
set_bit (FLAG_COMMIT, &local->flags);
|
|
break;
|
|
case IW_POWER_ALL_R:
|
|
if ((local->config.rmode & 0xFF) >= RXMODE_RFMON) {
|
|
return -EINVAL;
|
|
}
|
|
local->config.rmode &= 0xFF00;
|
|
local->config.rmode |= RXMODE_BC_MC_ADDR;
|
|
set_bit (FLAG_COMMIT, &local->flags);
|
|
case IW_POWER_ON:
|
|
/* This is broken, fixme ;-) */
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
// Note : we may want to factor local->need_commit here
|
|
// Note2 : may also want to factor RXMODE_RFMON test
|
|
return -EINPROGRESS; /* Call commit handler */
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : get Power Management
|
|
*/
|
|
static int airo_get_power(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_param *vwrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
int mode;
|
|
|
|
readConfigRid(local, 1);
|
|
mode = local->config.powerSaveMode;
|
|
if ((vwrq->disabled = (mode == POWERSAVE_CAM)))
|
|
return 0;
|
|
if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) {
|
|
vwrq->value = (int)local->config.fastListenDelay * 1024;
|
|
vwrq->flags = IW_POWER_TIMEOUT;
|
|
} else {
|
|
vwrq->value = (int)local->config.fastListenInterval * 1024;
|
|
vwrq->flags = IW_POWER_PERIOD;
|
|
}
|
|
if ((local->config.rmode & 0xFF) == RXMODE_ADDR)
|
|
vwrq->flags |= IW_POWER_UNICAST_R;
|
|
else
|
|
vwrq->flags |= IW_POWER_ALL_R;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : set Sensitivity
|
|
*/
|
|
static int airo_set_sens(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_param *vwrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
|
|
readConfigRid(local, 1);
|
|
local->config.rssiThreshold = vwrq->disabled ? RSSI_DEFAULT : vwrq->value;
|
|
set_bit (FLAG_COMMIT, &local->flags);
|
|
|
|
return -EINPROGRESS; /* Call commit handler */
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : get Sensitivity
|
|
*/
|
|
static int airo_get_sens(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_param *vwrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
|
|
readConfigRid(local, 1);
|
|
vwrq->value = local->config.rssiThreshold;
|
|
vwrq->disabled = (vwrq->value == 0);
|
|
vwrq->fixed = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : get AP List
|
|
* Note : this is deprecated in favor of IWSCAN
|
|
*/
|
|
static int airo_get_aplist(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_point *dwrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
struct sockaddr *address = (struct sockaddr *) extra;
|
|
struct iw_quality qual[IW_MAX_AP];
|
|
BSSListRid BSSList;
|
|
int i;
|
|
int loseSync = capable(CAP_NET_ADMIN) ? 1: -1;
|
|
|
|
for (i = 0; i < IW_MAX_AP; i++) {
|
|
if (readBSSListRid(local, loseSync, &BSSList))
|
|
break;
|
|
loseSync = 0;
|
|
memcpy(address[i].sa_data, BSSList.bssid, ETH_ALEN);
|
|
address[i].sa_family = ARPHRD_ETHER;
|
|
if (local->rssi) {
|
|
qual[i].level = 0x100 - BSSList.dBm;
|
|
qual[i].qual = airo_dbm_to_pct( local->rssi, BSSList.dBm );
|
|
qual[i].updated = IW_QUAL_QUAL_UPDATED
|
|
| IW_QUAL_LEVEL_UPDATED
|
|
| IW_QUAL_DBM;
|
|
} else {
|
|
qual[i].level = (BSSList.dBm + 321) / 2;
|
|
qual[i].qual = 0;
|
|
qual[i].updated = IW_QUAL_QUAL_INVALID
|
|
| IW_QUAL_LEVEL_UPDATED
|
|
| IW_QUAL_DBM;
|
|
}
|
|
qual[i].noise = local->wstats.qual.noise;
|
|
if (BSSList.index == 0xffff)
|
|
break;
|
|
}
|
|
if (!i) {
|
|
StatusRid status_rid; /* Card status info */
|
|
readStatusRid(local, &status_rid, 1);
|
|
for (i = 0;
|
|
i < min(IW_MAX_AP, 4) &&
|
|
(status_rid.bssid[i][0]
|
|
& status_rid.bssid[i][1]
|
|
& status_rid.bssid[i][2]
|
|
& status_rid.bssid[i][3]
|
|
& status_rid.bssid[i][4]
|
|
& status_rid.bssid[i][5])!=0xff &&
|
|
(status_rid.bssid[i][0]
|
|
| status_rid.bssid[i][1]
|
|
| status_rid.bssid[i][2]
|
|
| status_rid.bssid[i][3]
|
|
| status_rid.bssid[i][4]
|
|
| status_rid.bssid[i][5]);
|
|
i++) {
|
|
memcpy(address[i].sa_data,
|
|
status_rid.bssid[i], ETH_ALEN);
|
|
address[i].sa_family = ARPHRD_ETHER;
|
|
}
|
|
} else {
|
|
dwrq->flags = 1; /* Should be define'd */
|
|
memcpy(extra + sizeof(struct sockaddr)*i,
|
|
&qual, sizeof(struct iw_quality)*i);
|
|
}
|
|
dwrq->length = i;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : Initiate Scan
|
|
*/
|
|
static int airo_set_scan(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_param *vwrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *ai = dev->priv;
|
|
Cmd cmd;
|
|
Resp rsp;
|
|
int wake = 0;
|
|
|
|
/* Note : you may have realised that, as this is a SET operation,
|
|
* this is privileged and therefore a normal user can't
|
|
* perform scanning.
|
|
* This is not an error, while the device perform scanning,
|
|
* traffic doesn't flow, so it's a perfect DoS...
|
|
* Jean II */
|
|
if (ai->flags & FLAG_RADIO_MASK) return -ENETDOWN;
|
|
|
|
if (down_interruptible(&ai->sem))
|
|
return -ERESTARTSYS;
|
|
|
|
/* If there's already a scan in progress, don't
|
|
* trigger another one. */
|
|
if (ai->scan_timeout > 0)
|
|
goto out;
|
|
|
|
/* Initiate a scan command */
|
|
ai->scan_timeout = RUN_AT(3*HZ);
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
cmd.cmd=CMD_LISTBSS;
|
|
issuecommand(ai, &cmd, &rsp);
|
|
wake = 1;
|
|
|
|
out:
|
|
up(&ai->sem);
|
|
if (wake)
|
|
wake_up_interruptible(&ai->thr_wait);
|
|
return 0;
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Translate scan data returned from the card to a card independent
|
|
* format that the Wireless Tools will understand - Jean II
|
|
*/
|
|
static inline char *airo_translate_scan(struct net_device *dev,
|
|
char *current_ev,
|
|
char *end_buf,
|
|
BSSListRid *bss)
|
|
{
|
|
struct airo_info *ai = dev->priv;
|
|
struct iw_event iwe; /* Temporary buffer */
|
|
u16 capabilities;
|
|
char * current_val; /* For rates */
|
|
int i;
|
|
char * buf;
|
|
|
|
/* First entry *MUST* be the AP MAC address */
|
|
iwe.cmd = SIOCGIWAP;
|
|
iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
|
|
memcpy(iwe.u.ap_addr.sa_data, bss->bssid, ETH_ALEN);
|
|
current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN);
|
|
|
|
/* Other entries will be displayed in the order we give them */
|
|
|
|
/* Add the ESSID */
|
|
iwe.u.data.length = bss->ssidLen;
|
|
if(iwe.u.data.length > 32)
|
|
iwe.u.data.length = 32;
|
|
iwe.cmd = SIOCGIWESSID;
|
|
iwe.u.data.flags = 1;
|
|
current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, bss->ssid);
|
|
|
|
/* Add mode */
|
|
iwe.cmd = SIOCGIWMODE;
|
|
capabilities = le16_to_cpu(bss->cap);
|
|
if(capabilities & (CAP_ESS | CAP_IBSS)) {
|
|
if(capabilities & CAP_ESS)
|
|
iwe.u.mode = IW_MODE_MASTER;
|
|
else
|
|
iwe.u.mode = IW_MODE_ADHOC;
|
|
current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_UINT_LEN);
|
|
}
|
|
|
|
/* Add frequency */
|
|
iwe.cmd = SIOCGIWFREQ;
|
|
iwe.u.freq.m = le16_to_cpu(bss->dsChannel);
|
|
/* iwe.u.freq.m containt the channel (starting 1), our
|
|
* frequency_list array start at index 0...
|
|
*/
|
|
iwe.u.freq.m = frequency_list[iwe.u.freq.m - 1] * 100000;
|
|
iwe.u.freq.e = 1;
|
|
current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN);
|
|
|
|
/* Add quality statistics */
|
|
iwe.cmd = IWEVQUAL;
|
|
if (ai->rssi) {
|
|
iwe.u.qual.level = 0x100 - bss->dBm;
|
|
iwe.u.qual.qual = airo_dbm_to_pct( ai->rssi, bss->dBm );
|
|
iwe.u.qual.updated = IW_QUAL_QUAL_UPDATED
|
|
| IW_QUAL_LEVEL_UPDATED
|
|
| IW_QUAL_DBM;
|
|
} else {
|
|
iwe.u.qual.level = (bss->dBm + 321) / 2;
|
|
iwe.u.qual.qual = 0;
|
|
iwe.u.qual.updated = IW_QUAL_QUAL_INVALID
|
|
| IW_QUAL_LEVEL_UPDATED
|
|
| IW_QUAL_DBM;
|
|
}
|
|
iwe.u.qual.noise = ai->wstats.qual.noise;
|
|
current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN);
|
|
|
|
/* Add encryption capability */
|
|
iwe.cmd = SIOCGIWENCODE;
|
|
if(capabilities & CAP_PRIVACY)
|
|
iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
|
|
else
|
|
iwe.u.data.flags = IW_ENCODE_DISABLED;
|
|
iwe.u.data.length = 0;
|
|
current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, bss->ssid);
|
|
|
|
/* Rate : stuffing multiple values in a single event require a bit
|
|
* more of magic - Jean II */
|
|
current_val = current_ev + IW_EV_LCP_LEN;
|
|
|
|
iwe.cmd = SIOCGIWRATE;
|
|
/* Those two flags are ignored... */
|
|
iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
|
|
/* Max 8 values */
|
|
for(i = 0 ; i < 8 ; i++) {
|
|
/* NULL terminated */
|
|
if(bss->rates[i] == 0)
|
|
break;
|
|
/* Bit rate given in 500 kb/s units (+ 0x80) */
|
|
iwe.u.bitrate.value = ((bss->rates[i] & 0x7f) * 500000);
|
|
/* Add new value to event */
|
|
current_val = iwe_stream_add_value(current_ev, current_val, end_buf, &iwe, IW_EV_PARAM_LEN);
|
|
}
|
|
/* Check if we added any event */
|
|
if((current_val - current_ev) > IW_EV_LCP_LEN)
|
|
current_ev = current_val;
|
|
|
|
/* Beacon interval */
|
|
buf = kmalloc(30, GFP_KERNEL);
|
|
if (buf) {
|
|
iwe.cmd = IWEVCUSTOM;
|
|
sprintf(buf, "bcn_int=%d", bss->beaconInterval);
|
|
iwe.u.data.length = strlen(buf);
|
|
current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, buf);
|
|
kfree(buf);
|
|
}
|
|
|
|
/* Put WPA/RSN Information Elements into the event stream */
|
|
if (test_bit(FLAG_WPA_CAPABLE, &ai->flags)) {
|
|
unsigned int num_null_ies = 0;
|
|
u16 length = sizeof (bss->extra.iep);
|
|
struct ieee80211_info_element *info_element =
|
|
(struct ieee80211_info_element *) &bss->extra.iep;
|
|
|
|
while ((length >= sizeof(*info_element)) && (num_null_ies < 2)) {
|
|
if (sizeof(*info_element) + info_element->len > length) {
|
|
/* Invalid element, don't continue parsing IE */
|
|
break;
|
|
}
|
|
|
|
switch (info_element->id) {
|
|
case MFIE_TYPE_SSID:
|
|
/* Two zero-length SSID elements
|
|
* mean we're done parsing elements */
|
|
if (!info_element->len)
|
|
num_null_ies++;
|
|
break;
|
|
|
|
case MFIE_TYPE_GENERIC:
|
|
if (info_element->len >= 4 &&
|
|
info_element->data[0] == 0x00 &&
|
|
info_element->data[1] == 0x50 &&
|
|
info_element->data[2] == 0xf2 &&
|
|
info_element->data[3] == 0x01) {
|
|
iwe.cmd = IWEVGENIE;
|
|
iwe.u.data.length = min(info_element->len + 2,
|
|
MAX_WPA_IE_LEN);
|
|
current_ev = iwe_stream_add_point(current_ev, end_buf,
|
|
&iwe, (char *) info_element);
|
|
}
|
|
break;
|
|
|
|
case MFIE_TYPE_RSN:
|
|
iwe.cmd = IWEVGENIE;
|
|
iwe.u.data.length = min(info_element->len + 2,
|
|
MAX_WPA_IE_LEN);
|
|
current_ev = iwe_stream_add_point(current_ev, end_buf,
|
|
&iwe, (char *) info_element);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
length -= sizeof(*info_element) + info_element->len;
|
|
info_element =
|
|
(struct ieee80211_info_element *)&info_element->
|
|
data[info_element->len];
|
|
}
|
|
}
|
|
return current_ev;
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Wireless Handler : Read Scan Results
|
|
*/
|
|
static int airo_get_scan(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_point *dwrq,
|
|
char *extra)
|
|
{
|
|
struct airo_info *ai = dev->priv;
|
|
BSSListElement *net;
|
|
int err = 0;
|
|
char *current_ev = extra;
|
|
|
|
/* If a scan is in-progress, return -EAGAIN */
|
|
if (ai->scan_timeout > 0)
|
|
return -EAGAIN;
|
|
|
|
if (down_interruptible(&ai->sem))
|
|
return -EAGAIN;
|
|
|
|
list_for_each_entry (net, &ai->network_list, list) {
|
|
/* Translate to WE format this entry */
|
|
current_ev = airo_translate_scan(dev, current_ev,
|
|
extra + dwrq->length,
|
|
&net->bss);
|
|
|
|
/* Check if there is space for one more entry */
|
|
if((extra + dwrq->length - current_ev) <= IW_EV_ADDR_LEN) {
|
|
/* Ask user space to try again with a bigger buffer */
|
|
err = -E2BIG;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
/* Length of data */
|
|
dwrq->length = (current_ev - extra);
|
|
dwrq->flags = 0; /* todo */
|
|
|
|
out:
|
|
up(&ai->sem);
|
|
return err;
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Commit handler : called after a bunch of SET operations
|
|
*/
|
|
static int airo_config_commit(struct net_device *dev,
|
|
struct iw_request_info *info, /* NULL */
|
|
void *zwrq, /* NULL */
|
|
char *extra) /* NULL */
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
Resp rsp;
|
|
|
|
if (!test_bit (FLAG_COMMIT, &local->flags))
|
|
return 0;
|
|
|
|
/* Some of the "SET" function may have modified some of the
|
|
* parameters. It's now time to commit them in the card */
|
|
disable_MAC(local, 1);
|
|
if (test_bit (FLAG_RESET, &local->flags)) {
|
|
APListRid APList_rid;
|
|
SsidRid SSID_rid;
|
|
|
|
readAPListRid(local, &APList_rid);
|
|
readSsidRid(local, &SSID_rid);
|
|
if (test_bit(FLAG_MPI,&local->flags))
|
|
setup_card(local, dev->dev_addr, 1 );
|
|
else
|
|
reset_airo_card(dev);
|
|
disable_MAC(local, 1);
|
|
writeSsidRid(local, &SSID_rid, 1);
|
|
writeAPListRid(local, &APList_rid, 1);
|
|
}
|
|
if (down_interruptible(&local->sem))
|
|
return -ERESTARTSYS;
|
|
writeConfigRid(local, 0);
|
|
enable_MAC(local, &rsp, 0);
|
|
if (test_bit (FLAG_RESET, &local->flags))
|
|
airo_set_promisc(local);
|
|
else
|
|
up(&local->sem);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/*
|
|
* Structures to export the Wireless Handlers
|
|
*/
|
|
|
|
static const struct iw_priv_args airo_private_args[] = {
|
|
/*{ cmd, set_args, get_args, name } */
|
|
{ AIROIOCTL, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | sizeof (aironet_ioctl),
|
|
IW_PRIV_TYPE_BYTE | 2047, "airoioctl" },
|
|
{ AIROIDIFC, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | sizeof (aironet_ioctl),
|
|
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "airoidifc" },
|
|
};
|
|
|
|
static const iw_handler airo_handler[] =
|
|
{
|
|
(iw_handler) airo_config_commit, /* SIOCSIWCOMMIT */
|
|
(iw_handler) airo_get_name, /* SIOCGIWNAME */
|
|
(iw_handler) NULL, /* SIOCSIWNWID */
|
|
(iw_handler) NULL, /* SIOCGIWNWID */
|
|
(iw_handler) airo_set_freq, /* SIOCSIWFREQ */
|
|
(iw_handler) airo_get_freq, /* SIOCGIWFREQ */
|
|
(iw_handler) airo_set_mode, /* SIOCSIWMODE */
|
|
(iw_handler) airo_get_mode, /* SIOCGIWMODE */
|
|
(iw_handler) airo_set_sens, /* SIOCSIWSENS */
|
|
(iw_handler) airo_get_sens, /* SIOCGIWSENS */
|
|
(iw_handler) NULL, /* SIOCSIWRANGE */
|
|
(iw_handler) airo_get_range, /* SIOCGIWRANGE */
|
|
(iw_handler) NULL, /* SIOCSIWPRIV */
|
|
(iw_handler) NULL, /* SIOCGIWPRIV */
|
|
(iw_handler) NULL, /* SIOCSIWSTATS */
|
|
(iw_handler) NULL, /* SIOCGIWSTATS */
|
|
iw_handler_set_spy, /* SIOCSIWSPY */
|
|
iw_handler_get_spy, /* SIOCGIWSPY */
|
|
iw_handler_set_thrspy, /* SIOCSIWTHRSPY */
|
|
iw_handler_get_thrspy, /* SIOCGIWTHRSPY */
|
|
(iw_handler) airo_set_wap, /* SIOCSIWAP */
|
|
(iw_handler) airo_get_wap, /* SIOCGIWAP */
|
|
(iw_handler) NULL, /* -- hole -- */
|
|
(iw_handler) airo_get_aplist, /* SIOCGIWAPLIST */
|
|
(iw_handler) airo_set_scan, /* SIOCSIWSCAN */
|
|
(iw_handler) airo_get_scan, /* SIOCGIWSCAN */
|
|
(iw_handler) airo_set_essid, /* SIOCSIWESSID */
|
|
(iw_handler) airo_get_essid, /* SIOCGIWESSID */
|
|
(iw_handler) airo_set_nick, /* SIOCSIWNICKN */
|
|
(iw_handler) airo_get_nick, /* SIOCGIWNICKN */
|
|
(iw_handler) NULL, /* -- hole -- */
|
|
(iw_handler) NULL, /* -- hole -- */
|
|
(iw_handler) airo_set_rate, /* SIOCSIWRATE */
|
|
(iw_handler) airo_get_rate, /* SIOCGIWRATE */
|
|
(iw_handler) airo_set_rts, /* SIOCSIWRTS */
|
|
(iw_handler) airo_get_rts, /* SIOCGIWRTS */
|
|
(iw_handler) airo_set_frag, /* SIOCSIWFRAG */
|
|
(iw_handler) airo_get_frag, /* SIOCGIWFRAG */
|
|
(iw_handler) airo_set_txpow, /* SIOCSIWTXPOW */
|
|
(iw_handler) airo_get_txpow, /* SIOCGIWTXPOW */
|
|
(iw_handler) airo_set_retry, /* SIOCSIWRETRY */
|
|
(iw_handler) airo_get_retry, /* SIOCGIWRETRY */
|
|
(iw_handler) airo_set_encode, /* SIOCSIWENCODE */
|
|
(iw_handler) airo_get_encode, /* SIOCGIWENCODE */
|
|
(iw_handler) airo_set_power, /* SIOCSIWPOWER */
|
|
(iw_handler) airo_get_power, /* SIOCGIWPOWER */
|
|
(iw_handler) NULL, /* -- hole -- */
|
|
(iw_handler) NULL, /* -- hole -- */
|
|
(iw_handler) NULL, /* SIOCSIWGENIE */
|
|
(iw_handler) NULL, /* SIOCGIWGENIE */
|
|
(iw_handler) airo_set_auth, /* SIOCSIWAUTH */
|
|
(iw_handler) airo_get_auth, /* SIOCGIWAUTH */
|
|
(iw_handler) airo_set_encodeext, /* SIOCSIWENCODEEXT */
|
|
(iw_handler) airo_get_encodeext, /* SIOCGIWENCODEEXT */
|
|
(iw_handler) NULL, /* SIOCSIWPMKSA */
|
|
};
|
|
|
|
/* Note : don't describe AIROIDIFC and AIROOLDIDIFC in here.
|
|
* We want to force the use of the ioctl code, because those can't be
|
|
* won't work the iw_handler code (because they simultaneously read
|
|
* and write data and iw_handler can't do that).
|
|
* Note that it's perfectly legal to read/write on a single ioctl command,
|
|
* you just can't use iwpriv and need to force it via the ioctl handler.
|
|
* Jean II */
|
|
static const iw_handler airo_private_handler[] =
|
|
{
|
|
NULL, /* SIOCIWFIRSTPRIV */
|
|
};
|
|
|
|
static const struct iw_handler_def airo_handler_def =
|
|
{
|
|
.num_standard = sizeof(airo_handler)/sizeof(iw_handler),
|
|
.num_private = sizeof(airo_private_handler)/sizeof(iw_handler),
|
|
.num_private_args = sizeof(airo_private_args)/sizeof(struct iw_priv_args),
|
|
.standard = airo_handler,
|
|
.private = airo_private_handler,
|
|
.private_args = airo_private_args,
|
|
.get_wireless_stats = airo_get_wireless_stats,
|
|
};
|
|
|
|
/*
|
|
* This defines the configuration part of the Wireless Extensions
|
|
* Note : irq and spinlock protection will occur in the subroutines
|
|
*
|
|
* TODO :
|
|
* o Check input value more carefully and fill correct values in range
|
|
* o Test and shakeout the bugs (if any)
|
|
*
|
|
* Jean II
|
|
*
|
|
* Javier Achirica did a great job of merging code from the unnamed CISCO
|
|
* developer that added support for flashing the card.
|
|
*/
|
|
static int airo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
|
|
{
|
|
int rc = 0;
|
|
struct airo_info *ai = (struct airo_info *)dev->priv;
|
|
|
|
if (ai->power.event)
|
|
return 0;
|
|
|
|
switch (cmd) {
|
|
#ifdef CISCO_EXT
|
|
case AIROIDIFC:
|
|
#ifdef AIROOLDIDIFC
|
|
case AIROOLDIDIFC:
|
|
#endif
|
|
{
|
|
int val = AIROMAGIC;
|
|
aironet_ioctl com;
|
|
if (copy_from_user(&com,rq->ifr_data,sizeof(com)))
|
|
rc = -EFAULT;
|
|
else if (copy_to_user(com.data,(char *)&val,sizeof(val)))
|
|
rc = -EFAULT;
|
|
}
|
|
break;
|
|
|
|
case AIROIOCTL:
|
|
#ifdef AIROOLDIOCTL
|
|
case AIROOLDIOCTL:
|
|
#endif
|
|
/* Get the command struct and hand it off for evaluation by
|
|
* the proper subfunction
|
|
*/
|
|
{
|
|
aironet_ioctl com;
|
|
if (copy_from_user(&com,rq->ifr_data,sizeof(com))) {
|
|
rc = -EFAULT;
|
|
break;
|
|
}
|
|
|
|
/* Separate R/W functions bracket legality here
|
|
*/
|
|
if ( com.command == AIRORSWVERSION ) {
|
|
if (copy_to_user(com.data, swversion, sizeof(swversion)))
|
|
rc = -EFAULT;
|
|
else
|
|
rc = 0;
|
|
}
|
|
else if ( com.command <= AIRORRID)
|
|
rc = readrids(dev,&com);
|
|
else if ( com.command >= AIROPCAP && com.command <= (AIROPLEAPUSR+2) )
|
|
rc = writerids(dev,&com);
|
|
else if ( com.command >= AIROFLSHRST && com.command <= AIRORESTART )
|
|
rc = flashcard(dev,&com);
|
|
else
|
|
rc = -EINVAL; /* Bad command in ioctl */
|
|
}
|
|
break;
|
|
#endif /* CISCO_EXT */
|
|
|
|
// All other calls are currently unsupported
|
|
default:
|
|
rc = -EOPNOTSUPP;
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* Get the Wireless stats out of the driver
|
|
* Note : irq and spinlock protection will occur in the subroutines
|
|
*
|
|
* TODO :
|
|
* o Check if work in Ad-Hoc mode (otherwise, use SPY, as in wvlan_cs)
|
|
*
|
|
* Jean
|
|
*/
|
|
static void airo_read_wireless_stats(struct airo_info *local)
|
|
{
|
|
StatusRid status_rid;
|
|
StatsRid stats_rid;
|
|
CapabilityRid cap_rid;
|
|
u32 *vals = stats_rid.vals;
|
|
|
|
/* Get stats out of the card */
|
|
clear_bit(JOB_WSTATS, &local->jobs);
|
|
if (local->power.event) {
|
|
up(&local->sem);
|
|
return;
|
|
}
|
|
readCapabilityRid(local, &cap_rid, 0);
|
|
readStatusRid(local, &status_rid, 0);
|
|
readStatsRid(local, &stats_rid, RID_STATS, 0);
|
|
up(&local->sem);
|
|
|
|
/* The status */
|
|
local->wstats.status = status_rid.mode;
|
|
|
|
/* Signal quality and co */
|
|
if (local->rssi) {
|
|
local->wstats.qual.level = airo_rssi_to_dbm( local->rssi, status_rid.sigQuality );
|
|
/* normalizedSignalStrength appears to be a percentage */
|
|
local->wstats.qual.qual = status_rid.normalizedSignalStrength;
|
|
} else {
|
|
local->wstats.qual.level = (status_rid.normalizedSignalStrength + 321) / 2;
|
|
local->wstats.qual.qual = airo_get_quality(&status_rid, &cap_rid);
|
|
}
|
|
if (status_rid.len >= 124) {
|
|
local->wstats.qual.noise = 0x100 - status_rid.noisedBm;
|
|
local->wstats.qual.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM;
|
|
} else {
|
|
local->wstats.qual.noise = 0;
|
|
local->wstats.qual.updated = IW_QUAL_QUAL_UPDATED | IW_QUAL_LEVEL_UPDATED | IW_QUAL_NOISE_INVALID | IW_QUAL_DBM;
|
|
}
|
|
|
|
/* Packets discarded in the wireless adapter due to wireless
|
|
* specific problems */
|
|
local->wstats.discard.nwid = vals[56] + vals[57] + vals[58];/* SSID Mismatch */
|
|
local->wstats.discard.code = vals[6];/* RxWepErr */
|
|
local->wstats.discard.fragment = vals[30];
|
|
local->wstats.discard.retries = vals[10];
|
|
local->wstats.discard.misc = vals[1] + vals[32];
|
|
local->wstats.miss.beacon = vals[34];
|
|
}
|
|
|
|
static struct iw_statistics *airo_get_wireless_stats(struct net_device *dev)
|
|
{
|
|
struct airo_info *local = dev->priv;
|
|
|
|
if (!test_bit(JOB_WSTATS, &local->jobs)) {
|
|
/* Get stats out of the card if available */
|
|
if (down_trylock(&local->sem) != 0) {
|
|
set_bit(JOB_WSTATS, &local->jobs);
|
|
wake_up_interruptible(&local->thr_wait);
|
|
} else
|
|
airo_read_wireless_stats(local);
|
|
}
|
|
|
|
return &local->wstats;
|
|
}
|
|
|
|
#ifdef CISCO_EXT
|
|
/*
|
|
* This just translates from driver IOCTL codes to the command codes to
|
|
* feed to the radio's host interface. Things can be added/deleted
|
|
* as needed. This represents the READ side of control I/O to
|
|
* the card
|
|
*/
|
|
static int readrids(struct net_device *dev, aironet_ioctl *comp) {
|
|
unsigned short ridcode;
|
|
unsigned char *iobuf;
|
|
int len;
|
|
struct airo_info *ai = dev->priv;
|
|
Resp rsp;
|
|
|
|
if (test_bit(FLAG_FLASHING, &ai->flags))
|
|
return -EIO;
|
|
|
|
switch(comp->command)
|
|
{
|
|
case AIROGCAP: ridcode = RID_CAPABILITIES; break;
|
|
case AIROGCFG: ridcode = RID_CONFIG;
|
|
if (test_bit(FLAG_COMMIT, &ai->flags)) {
|
|
disable_MAC (ai, 1);
|
|
writeConfigRid (ai, 1);
|
|
enable_MAC (ai, &rsp, 1);
|
|
}
|
|
break;
|
|
case AIROGSLIST: ridcode = RID_SSID; break;
|
|
case AIROGVLIST: ridcode = RID_APLIST; break;
|
|
case AIROGDRVNAM: ridcode = RID_DRVNAME; break;
|
|
case AIROGEHTENC: ridcode = RID_ETHERENCAP; break;
|
|
case AIROGWEPKTMP: ridcode = RID_WEP_TEMP;
|
|
/* Only super-user can read WEP keys */
|
|
if (!capable(CAP_NET_ADMIN))
|
|
return -EPERM;
|
|
break;
|
|
case AIROGWEPKNV: ridcode = RID_WEP_PERM;
|
|
/* Only super-user can read WEP keys */
|
|
if (!capable(CAP_NET_ADMIN))
|
|
return -EPERM;
|
|
break;
|
|
case AIROGSTAT: ridcode = RID_STATUS; break;
|
|
case AIROGSTATSD32: ridcode = RID_STATSDELTA; break;
|
|
case AIROGSTATSC32: ridcode = RID_STATS; break;
|
|
case AIROGMICSTATS:
|
|
if (copy_to_user(comp->data, &ai->micstats,
|
|
min((int)comp->len,(int)sizeof(ai->micstats))))
|
|
return -EFAULT;
|
|
return 0;
|
|
case AIRORRID: ridcode = comp->ridnum; break;
|
|
default:
|
|
return -EINVAL;
|
|
break;
|
|
}
|
|
|
|
if ((iobuf = kmalloc(RIDSIZE, GFP_KERNEL)) == NULL)
|
|
return -ENOMEM;
|
|
|
|
PC4500_readrid(ai,ridcode,iobuf,RIDSIZE, 1);
|
|
/* get the count of bytes in the rid docs say 1st 2 bytes is it.
|
|
* then return it to the user
|
|
* 9/22/2000 Honor user given length
|
|
*/
|
|
len = comp->len;
|
|
|
|
if (copy_to_user(comp->data, iobuf, min(len, (int)RIDSIZE))) {
|
|
kfree (iobuf);
|
|
return -EFAULT;
|
|
}
|
|
kfree (iobuf);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Danger Will Robinson write the rids here
|
|
*/
|
|
|
|
static int writerids(struct net_device *dev, aironet_ioctl *comp) {
|
|
struct airo_info *ai = dev->priv;
|
|
int ridcode;
|
|
int enabled;
|
|
Resp rsp;
|
|
static int (* writer)(struct airo_info *, u16 rid, const void *, int, int);
|
|
unsigned char *iobuf;
|
|
|
|
/* Only super-user can write RIDs */
|
|
if (!capable(CAP_NET_ADMIN))
|
|
return -EPERM;
|
|
|
|
if (test_bit(FLAG_FLASHING, &ai->flags))
|
|
return -EIO;
|
|
|
|
ridcode = 0;
|
|
writer = do_writerid;
|
|
|
|
switch(comp->command)
|
|
{
|
|
case AIROPSIDS: ridcode = RID_SSID; break;
|
|
case AIROPCAP: ridcode = RID_CAPABILITIES; break;
|
|
case AIROPAPLIST: ridcode = RID_APLIST; break;
|
|
case AIROPCFG: ai->config.len = 0;
|
|
clear_bit(FLAG_COMMIT, &ai->flags);
|
|
ridcode = RID_CONFIG; break;
|
|
case AIROPWEPKEYNV: ridcode = RID_WEP_PERM; break;
|
|
case AIROPLEAPUSR: ridcode = RID_LEAPUSERNAME; break;
|
|
case AIROPLEAPPWD: ridcode = RID_LEAPPASSWORD; break;
|
|
case AIROPWEPKEY: ridcode = RID_WEP_TEMP; writer = PC4500_writerid;
|
|
break;
|
|
case AIROPLEAPUSR+1: ridcode = 0xFF2A; break;
|
|
case AIROPLEAPUSR+2: ridcode = 0xFF2B; break;
|
|
|
|
/* this is not really a rid but a command given to the card
|
|
* same with MAC off
|
|
*/
|
|
case AIROPMACON:
|
|
if (enable_MAC(ai, &rsp, 1) != 0)
|
|
return -EIO;
|
|
return 0;
|
|
|
|
/*
|
|
* Evidently this code in the airo driver does not get a symbol
|
|
* as disable_MAC. it's probably so short the compiler does not gen one.
|
|
*/
|
|
case AIROPMACOFF:
|
|
disable_MAC(ai, 1);
|
|
return 0;
|
|
|
|
/* This command merely clears the counts does not actually store any data
|
|
* only reads rid. But as it changes the cards state, I put it in the
|
|
* writerid routines.
|
|
*/
|
|
case AIROPSTCLR:
|
|
if ((iobuf = kmalloc(RIDSIZE, GFP_KERNEL)) == NULL)
|
|
return -ENOMEM;
|
|
|
|
PC4500_readrid(ai,RID_STATSDELTACLEAR,iobuf,RIDSIZE, 1);
|
|
|
|
enabled = ai->micstats.enabled;
|
|
memset(&ai->micstats,0,sizeof(ai->micstats));
|
|
ai->micstats.enabled = enabled;
|
|
|
|
if (copy_to_user(comp->data, iobuf,
|
|
min((int)comp->len, (int)RIDSIZE))) {
|
|
kfree (iobuf);
|
|
return -EFAULT;
|
|
}
|
|
kfree (iobuf);
|
|
return 0;
|
|
|
|
default:
|
|
return -EOPNOTSUPP; /* Blarg! */
|
|
}
|
|
if(comp->len > RIDSIZE)
|
|
return -EINVAL;
|
|
|
|
if ((iobuf = kmalloc(RIDSIZE, GFP_KERNEL)) == NULL)
|
|
return -ENOMEM;
|
|
|
|
if (copy_from_user(iobuf,comp->data,comp->len)) {
|
|
kfree (iobuf);
|
|
return -EFAULT;
|
|
}
|
|
|
|
if (comp->command == AIROPCFG) {
|
|
ConfigRid *cfg = (ConfigRid *)iobuf;
|
|
|
|
if (test_bit(FLAG_MIC_CAPABLE, &ai->flags))
|
|
cfg->opmode |= MODE_MIC;
|
|
|
|
if ((cfg->opmode & 0xFF) == MODE_STA_IBSS)
|
|
set_bit (FLAG_ADHOC, &ai->flags);
|
|
else
|
|
clear_bit (FLAG_ADHOC, &ai->flags);
|
|
}
|
|
|
|
if((*writer)(ai, ridcode, iobuf,comp->len,1)) {
|
|
kfree (iobuf);
|
|
return -EIO;
|
|
}
|
|
kfree (iobuf);
|
|
return 0;
|
|
}
|
|
|
|
/*****************************************************************************
|
|
* Ancillary flash / mod functions much black magic lurkes here *
|
|
*****************************************************************************
|
|
*/
|
|
|
|
/*
|
|
* Flash command switch table
|
|
*/
|
|
|
|
static int flashcard(struct net_device *dev, aironet_ioctl *comp) {
|
|
int z;
|
|
|
|
/* Only super-user can modify flash */
|
|
if (!capable(CAP_NET_ADMIN))
|
|
return -EPERM;
|
|
|
|
switch(comp->command)
|
|
{
|
|
case AIROFLSHRST:
|
|
return cmdreset((struct airo_info *)dev->priv);
|
|
|
|
case AIROFLSHSTFL:
|
|
if (!((struct airo_info *)dev->priv)->flash &&
|
|
(((struct airo_info *)dev->priv)->flash = kmalloc (FLASHSIZE, GFP_KERNEL)) == NULL)
|
|
return -ENOMEM;
|
|
return setflashmode((struct airo_info *)dev->priv);
|
|
|
|
case AIROFLSHGCHR: /* Get char from aux */
|
|
if(comp->len != sizeof(int))
|
|
return -EINVAL;
|
|
if (copy_from_user(&z,comp->data,comp->len))
|
|
return -EFAULT;
|
|
return flashgchar((struct airo_info *)dev->priv,z,8000);
|
|
|
|
case AIROFLSHPCHR: /* Send char to card. */
|
|
if(comp->len != sizeof(int))
|
|
return -EINVAL;
|
|
if (copy_from_user(&z,comp->data,comp->len))
|
|
return -EFAULT;
|
|
return flashpchar((struct airo_info *)dev->priv,z,8000);
|
|
|
|
case AIROFLPUTBUF: /* Send 32k to card */
|
|
if (!((struct airo_info *)dev->priv)->flash)
|
|
return -ENOMEM;
|
|
if(comp->len > FLASHSIZE)
|
|
return -EINVAL;
|
|
if(copy_from_user(((struct airo_info *)dev->priv)->flash,comp->data,comp->len))
|
|
return -EFAULT;
|
|
|
|
flashputbuf((struct airo_info *)dev->priv);
|
|
return 0;
|
|
|
|
case AIRORESTART:
|
|
if(flashrestart((struct airo_info *)dev->priv,dev))
|
|
return -EIO;
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
#define FLASH_COMMAND 0x7e7e
|
|
|
|
/*
|
|
* STEP 1)
|
|
* Disable MAC and do soft reset on
|
|
* card.
|
|
*/
|
|
|
|
static int cmdreset(struct airo_info *ai) {
|
|
disable_MAC(ai, 1);
|
|
|
|
if(!waitbusy (ai)){
|
|
airo_print_info(ai->dev->name, "Waitbusy hang before RESET");
|
|
return -EBUSY;
|
|
}
|
|
|
|
OUT4500(ai,COMMAND,CMD_SOFTRESET);
|
|
|
|
ssleep(1); /* WAS 600 12/7/00 */
|
|
|
|
if(!waitbusy (ai)){
|
|
airo_print_info(ai->dev->name, "Waitbusy hang AFTER RESET");
|
|
return -EBUSY;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* STEP 2)
|
|
* Put the card in legendary flash
|
|
* mode
|
|
*/
|
|
|
|
static int setflashmode (struct airo_info *ai) {
|
|
set_bit (FLAG_FLASHING, &ai->flags);
|
|
|
|
OUT4500(ai, SWS0, FLASH_COMMAND);
|
|
OUT4500(ai, SWS1, FLASH_COMMAND);
|
|
if (probe) {
|
|
OUT4500(ai, SWS0, FLASH_COMMAND);
|
|
OUT4500(ai, COMMAND,0x10);
|
|
} else {
|
|
OUT4500(ai, SWS2, FLASH_COMMAND);
|
|
OUT4500(ai, SWS3, FLASH_COMMAND);
|
|
OUT4500(ai, COMMAND,0);
|
|
}
|
|
msleep(500); /* 500ms delay */
|
|
|
|
if(!waitbusy(ai)) {
|
|
clear_bit (FLAG_FLASHING, &ai->flags);
|
|
airo_print_info(ai->dev->name, "Waitbusy hang after setflash mode");
|
|
return -EIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Put character to SWS0 wait for dwelltime
|
|
* x 50us for echo .
|
|
*/
|
|
|
|
static int flashpchar(struct airo_info *ai,int byte,int dwelltime) {
|
|
int echo;
|
|
int waittime;
|
|
|
|
byte |= 0x8000;
|
|
|
|
if(dwelltime == 0 )
|
|
dwelltime = 200;
|
|
|
|
waittime=dwelltime;
|
|
|
|
/* Wait for busy bit d15 to go false indicating buffer empty */
|
|
while ((IN4500 (ai, SWS0) & 0x8000) && waittime > 0) {
|
|
udelay (50);
|
|
waittime -= 50;
|
|
}
|
|
|
|
/* timeout for busy clear wait */
|
|
if(waittime <= 0 ){
|
|
airo_print_info(ai->dev->name, "flash putchar busywait timeout!");
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* Port is clear now write byte and wait for it to echo back */
|
|
do {
|
|
OUT4500(ai,SWS0,byte);
|
|
udelay(50);
|
|
dwelltime -= 50;
|
|
echo = IN4500(ai,SWS1);
|
|
} while (dwelltime >= 0 && echo != byte);
|
|
|
|
OUT4500(ai,SWS1,0);
|
|
|
|
return (echo == byte) ? 0 : -EIO;
|
|
}
|
|
|
|
/*
|
|
* Get a character from the card matching matchbyte
|
|
* Step 3)
|
|
*/
|
|
static int flashgchar(struct airo_info *ai,int matchbyte,int dwelltime){
|
|
int rchar;
|
|
unsigned char rbyte=0;
|
|
|
|
do {
|
|
rchar = IN4500(ai,SWS1);
|
|
|
|
if(dwelltime && !(0x8000 & rchar)){
|
|
dwelltime -= 10;
|
|
mdelay(10);
|
|
continue;
|
|
}
|
|
rbyte = 0xff & rchar;
|
|
|
|
if( (rbyte == matchbyte) && (0x8000 & rchar) ){
|
|
OUT4500(ai,SWS1,0);
|
|
return 0;
|
|
}
|
|
if( rbyte == 0x81 || rbyte == 0x82 || rbyte == 0x83 || rbyte == 0x1a || 0xffff == rchar)
|
|
break;
|
|
OUT4500(ai,SWS1,0);
|
|
|
|
}while(dwelltime > 0);
|
|
return -EIO;
|
|
}
|
|
|
|
/*
|
|
* Transfer 32k of firmware data from user buffer to our buffer and
|
|
* send to the card
|
|
*/
|
|
|
|
static int flashputbuf(struct airo_info *ai){
|
|
int nwords;
|
|
|
|
/* Write stuff */
|
|
if (test_bit(FLAG_MPI,&ai->flags))
|
|
memcpy_toio(ai->pciaux + 0x8000, ai->flash, FLASHSIZE);
|
|
else {
|
|
OUT4500(ai,AUXPAGE,0x100);
|
|
OUT4500(ai,AUXOFF,0);
|
|
|
|
for(nwords=0;nwords != FLASHSIZE / 2;nwords++){
|
|
OUT4500(ai,AUXDATA,ai->flash[nwords] & 0xffff);
|
|
}
|
|
}
|
|
OUT4500(ai,SWS0,0x8000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
*
|
|
*/
|
|
static int flashrestart(struct airo_info *ai,struct net_device *dev){
|
|
int i,status;
|
|
|
|
ssleep(1); /* Added 12/7/00 */
|
|
clear_bit (FLAG_FLASHING, &ai->flags);
|
|
if (test_bit(FLAG_MPI, &ai->flags)) {
|
|
status = mpi_init_descriptors(ai);
|
|
if (status != SUCCESS)
|
|
return status;
|
|
}
|
|
status = setup_card(ai, dev->dev_addr, 1);
|
|
|
|
if (!test_bit(FLAG_MPI,&ai->flags))
|
|
for( i = 0; i < MAX_FIDS; i++ ) {
|
|
ai->fids[i] = transmit_allocate
|
|
( ai, AIRO_DEF_MTU, i >= MAX_FIDS / 2 );
|
|
}
|
|
|
|
ssleep(1); /* Added 12/7/00 */
|
|
return status;
|
|
}
|
|
#endif /* CISCO_EXT */
|
|
|
|
/*
|
|
This program is free software; you can redistribute it and/or
|
|
modify it under the terms of the GNU General Public License
|
|
as published by the Free Software Foundation; either version 2
|
|
of the License, or (at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
In addition:
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions
|
|
are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright
|
|
notice, this list of conditions and the following disclaimer.
|
|
2. Redistributions in binary form must reproduce the above copyright
|
|
notice, this list of conditions and the following disclaimer in the
|
|
documentation and/or other materials provided with the distribution.
|
|
3. The name of the author may not be used to endorse or promote
|
|
products derived from this software without specific prior written
|
|
permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
|
|
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
|
|
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
module_init(airo_init_module);
|
|
module_exit(airo_cleanup_module);
|