1963 lines
55 KiB
C
1963 lines
55 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* MacBook (Pro) SPI keyboard and touchpad driver
|
|
*
|
|
* Copyright (c) 2015-2018 Federico Lorenzi
|
|
* Copyright (c) 2017-2018 Ronald Tschalär
|
|
*/
|
|
|
|
/*
|
|
* The keyboard and touchpad controller on the MacBookAir6, MacBookPro12,
|
|
* MacBook8 and newer can be driven either by USB or SPI. However the USB
|
|
* pins are only connected on the MacBookAir6 and 7 and the MacBookPro12.
|
|
* All others need this driver. The interface is selected using ACPI methods:
|
|
*
|
|
* * UIEN ("USB Interface Enable"): If invoked with argument 1, disables SPI
|
|
* and enables USB. If invoked with argument 0, disables USB.
|
|
* * UIST ("USB Interface Status"): Returns 1 if USB is enabled, 0 otherwise.
|
|
* * SIEN ("SPI Interface Enable"): If invoked with argument 1, disables USB
|
|
* and enables SPI. If invoked with argument 0, disables SPI.
|
|
* * SIST ("SPI Interface Status"): Returns 1 if SPI is enabled, 0 otherwise.
|
|
* * ISOL: Resets the four GPIO pins used for SPI. Intended to be invoked with
|
|
* argument 1, then once more with argument 0.
|
|
*
|
|
* UIEN and UIST are only provided on models where the USB pins are connected.
|
|
*
|
|
* SPI-based Protocol
|
|
* ------------------
|
|
*
|
|
* The device and driver exchange messages (struct message); each message is
|
|
* encapsulated in one or more packets (struct spi_packet). There are two types
|
|
* of exchanges: reads, and writes. A read is signaled by a GPE, upon which one
|
|
* message can be read from the device. A write exchange consists of writing a
|
|
* command message, immediately reading a short status packet, and then, upon
|
|
* receiving a GPE, reading the response message. Write exchanges cannot be
|
|
* interleaved, i.e. a new write exchange must not be started till the previous
|
|
* write exchange is complete. Whether a received message is part of a read or
|
|
* write exchange is indicated in the encapsulating packet's flags field.
|
|
*
|
|
* A single message may be too large to fit in a single packet (which has a
|
|
* fixed, 256-byte size). In that case it will be split over multiple,
|
|
* consecutive packets.
|
|
*/
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/crc16.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/efi.h>
|
|
#include <linux/input.h>
|
|
#include <linux/input/mt.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/module.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/workqueue.h>
|
|
|
|
#include <asm/barrier.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
#define CREATE_TRACE_POINTS
|
|
#include "applespi.h"
|
|
#include "applespi_trace.h"
|
|
|
|
#define APPLESPI_PACKET_SIZE 256
|
|
#define APPLESPI_STATUS_SIZE 4
|
|
|
|
#define PACKET_TYPE_READ 0x20
|
|
#define PACKET_TYPE_WRITE 0x40
|
|
#define PACKET_DEV_KEYB 0x01
|
|
#define PACKET_DEV_TPAD 0x02
|
|
#define PACKET_DEV_INFO 0xd0
|
|
|
|
#define MAX_ROLLOVER 6
|
|
|
|
#define MAX_FINGERS 11
|
|
#define MAX_FINGER_ORIENTATION 16384
|
|
#define MAX_PKTS_PER_MSG 2
|
|
|
|
#define KBD_BL_LEVEL_MIN 32U
|
|
#define KBD_BL_LEVEL_MAX 255U
|
|
#define KBD_BL_LEVEL_SCALE 1000000U
|
|
#define KBD_BL_LEVEL_ADJ \
|
|
((KBD_BL_LEVEL_MAX - KBD_BL_LEVEL_MIN) * KBD_BL_LEVEL_SCALE / 255U)
|
|
|
|
#define EFI_BL_LEVEL_NAME L"KeyboardBacklightLevel"
|
|
#define EFI_BL_LEVEL_GUID EFI_GUID(0xa076d2af, 0x9678, 0x4386, 0x8b, 0x58, 0x1f, 0xc8, 0xef, 0x04, 0x16, 0x19)
|
|
|
|
#define APPLE_FLAG_FKEY 0x01
|
|
|
|
#define SPI_RW_CHG_DELAY_US 100 /* from experimentation, in µs */
|
|
|
|
#define SYNAPTICS_VENDOR_ID 0x06cb
|
|
|
|
static unsigned int fnmode = 1;
|
|
module_param(fnmode, uint, 0644);
|
|
MODULE_PARM_DESC(fnmode, "Mode of Fn key on Apple keyboards (0 = disabled, [1] = fkeyslast, 2 = fkeysfirst)");
|
|
|
|
static unsigned int fnremap;
|
|
module_param(fnremap, uint, 0644);
|
|
MODULE_PARM_DESC(fnremap, "Remap Fn key ([0] = no-remap; 1 = left-ctrl, 2 = left-shift, 3 = left-alt, 4 = left-meta, 6 = right-shift, 7 = right-alt, 8 = right-meta)");
|
|
|
|
static bool iso_layout;
|
|
module_param(iso_layout, bool, 0644);
|
|
MODULE_PARM_DESC(iso_layout, "Enable/Disable hardcoded ISO-layout of the keyboard. ([0] = disabled, 1 = enabled)");
|
|
|
|
static char touchpad_dimensions[40];
|
|
module_param_string(touchpad_dimensions, touchpad_dimensions,
|
|
sizeof(touchpad_dimensions), 0444);
|
|
MODULE_PARM_DESC(touchpad_dimensions, "The pixel dimensions of the touchpad, as XxY+W+H .");
|
|
|
|
/**
|
|
* struct keyboard_protocol - keyboard message.
|
|
* message.type = 0x0110, message.length = 0x000a
|
|
*
|
|
* @unknown1: unknown
|
|
* @modifiers: bit-set of modifier/control keys pressed
|
|
* @unknown2: unknown
|
|
* @keys_pressed: the (non-modifier) keys currently pressed
|
|
* @fn_pressed: whether the fn key is currently pressed
|
|
* @crc16: crc over the whole message struct (message header +
|
|
* this struct) minus this @crc16 field
|
|
*/
|
|
struct keyboard_protocol {
|
|
u8 unknown1;
|
|
u8 modifiers;
|
|
u8 unknown2;
|
|
u8 keys_pressed[MAX_ROLLOVER];
|
|
u8 fn_pressed;
|
|
__le16 crc16;
|
|
};
|
|
|
|
/**
|
|
* struct tp_finger - single trackpad finger structure, le16-aligned
|
|
*
|
|
* @origin: zero when switching track finger
|
|
* @abs_x: absolute x coordinate
|
|
* @abs_y: absolute y coordinate
|
|
* @rel_x: relative x coordinate
|
|
* @rel_y: relative y coordinate
|
|
* @tool_major: tool area, major axis
|
|
* @tool_minor: tool area, minor axis
|
|
* @orientation: 16384 when point, else 15 bit angle
|
|
* @touch_major: touch area, major axis
|
|
* @touch_minor: touch area, minor axis
|
|
* @unused: zeros
|
|
* @pressure: pressure on forcetouch touchpad
|
|
* @multi: one finger: varies, more fingers: constant
|
|
* @crc16: on last finger: crc over the whole message struct
|
|
* (i.e. message header + this struct) minus the last
|
|
* @crc16 field; unknown on all other fingers.
|
|
*/
|
|
struct tp_finger {
|
|
__le16 origin;
|
|
__le16 abs_x;
|
|
__le16 abs_y;
|
|
__le16 rel_x;
|
|
__le16 rel_y;
|
|
__le16 tool_major;
|
|
__le16 tool_minor;
|
|
__le16 orientation;
|
|
__le16 touch_major;
|
|
__le16 touch_minor;
|
|
__le16 unused[2];
|
|
__le16 pressure;
|
|
__le16 multi;
|
|
__le16 crc16;
|
|
};
|
|
|
|
/**
|
|
* struct touchpad_protocol - touchpad message.
|
|
* message.type = 0x0210
|
|
*
|
|
* @unknown1: unknown
|
|
* @clicked: 1 if a button-click was detected, 0 otherwise
|
|
* @unknown2: unknown
|
|
* @number_of_fingers: the number of fingers being reported in @fingers
|
|
* @clicked2: same as @clicked
|
|
* @unknown3: unknown
|
|
* @fingers: the data for each finger
|
|
*/
|
|
struct touchpad_protocol {
|
|
u8 unknown1[1];
|
|
u8 clicked;
|
|
u8 unknown2[28];
|
|
u8 number_of_fingers;
|
|
u8 clicked2;
|
|
u8 unknown3[16];
|
|
struct tp_finger fingers[];
|
|
};
|
|
|
|
/**
|
|
* struct command_protocol_tp_info - get touchpad info.
|
|
* message.type = 0x1020, message.length = 0x0000
|
|
*
|
|
* @crc16: crc over the whole message struct (message header +
|
|
* this struct) minus this @crc16 field
|
|
*/
|
|
struct command_protocol_tp_info {
|
|
__le16 crc16;
|
|
};
|
|
|
|
/**
|
|
* struct touchpad_info - touchpad info response.
|
|
* message.type = 0x1020, message.length = 0x006e
|
|
*
|
|
* @unknown1: unknown
|
|
* @model_flags: flags (vary by model number, but significance otherwise
|
|
* unknown)
|
|
* @model_no: the touchpad model number
|
|
* @unknown2: unknown
|
|
* @crc16: crc over the whole message struct (message header +
|
|
* this struct) minus this @crc16 field
|
|
*/
|
|
struct touchpad_info_protocol {
|
|
u8 unknown1[105];
|
|
u8 model_flags;
|
|
u8 model_no;
|
|
u8 unknown2[3];
|
|
__le16 crc16;
|
|
};
|
|
|
|
/**
|
|
* struct command_protocol_mt_init - initialize multitouch.
|
|
* message.type = 0x0252, message.length = 0x0002
|
|
*
|
|
* @cmd: value: 0x0102
|
|
* @crc16: crc over the whole message struct (message header +
|
|
* this struct) minus this @crc16 field
|
|
*/
|
|
struct command_protocol_mt_init {
|
|
__le16 cmd;
|
|
__le16 crc16;
|
|
};
|
|
|
|
/**
|
|
* struct command_protocol_capsl - toggle caps-lock led
|
|
* message.type = 0x0151, message.length = 0x0002
|
|
*
|
|
* @unknown: value: 0x01 (length?)
|
|
* @led: 0 off, 2 on
|
|
* @crc16: crc over the whole message struct (message header +
|
|
* this struct) minus this @crc16 field
|
|
*/
|
|
struct command_protocol_capsl {
|
|
u8 unknown;
|
|
u8 led;
|
|
__le16 crc16;
|
|
};
|
|
|
|
/**
|
|
* struct command_protocol_bl - set keyboard backlight brightness
|
|
* message.type = 0xB051, message.length = 0x0006
|
|
*
|
|
* @const1: value: 0x01B0
|
|
* @level: the brightness level to set
|
|
* @const2: value: 0x0001 (backlight off), 0x01F4 (backlight on)
|
|
* @crc16: crc over the whole message struct (message header +
|
|
* this struct) minus this @crc16 field
|
|
*/
|
|
struct command_protocol_bl {
|
|
__le16 const1;
|
|
__le16 level;
|
|
__le16 const2;
|
|
__le16 crc16;
|
|
};
|
|
|
|
/**
|
|
* struct message - a complete spi message.
|
|
*
|
|
* Each message begins with fixed header, followed by a message-type specific
|
|
* payload, and ends with a 16-bit crc. Because of the varying lengths of the
|
|
* payload, the crc is defined at the end of each payload struct, rather than
|
|
* in this struct.
|
|
*
|
|
* @type: the message type
|
|
* @zero: always 0
|
|
* @counter: incremented on each message, rolls over after 255; there is a
|
|
* separate counter for each message type.
|
|
* @rsp_buf_len:response buffer length (the exact nature of this field is quite
|
|
* speculative). On a request/write this is often the same as
|
|
* @length, though in some cases it has been seen to be much larger
|
|
* (e.g. 0x400); on a response/read this the same as on the
|
|
* request; for reads that are not responses it is 0.
|
|
* @length: length of the remainder of the data in the whole message
|
|
* structure (after re-assembly in case of being split over
|
|
* multiple spi-packets), minus the trailing crc. The total size
|
|
* of the message struct is therefore @length + 10.
|
|
*/
|
|
struct message {
|
|
__le16 type;
|
|
u8 zero;
|
|
u8 counter;
|
|
__le16 rsp_buf_len;
|
|
__le16 length;
|
|
union {
|
|
struct keyboard_protocol keyboard;
|
|
struct touchpad_protocol touchpad;
|
|
struct touchpad_info_protocol tp_info;
|
|
struct command_protocol_tp_info tp_info_command;
|
|
struct command_protocol_mt_init init_mt_command;
|
|
struct command_protocol_capsl capsl_command;
|
|
struct command_protocol_bl bl_command;
|
|
u8 data[0];
|
|
};
|
|
};
|
|
|
|
/* type + zero + counter + rsp_buf_len + length */
|
|
#define MSG_HEADER_SIZE 8
|
|
|
|
/**
|
|
* struct spi_packet - a complete spi packet; always 256 bytes. This carries
|
|
* the (parts of the) message in the data. But note that this does not
|
|
* necessarily contain a complete message, as in some cases (e.g. many
|
|
* fingers pressed) the message is split over multiple packets (see the
|
|
* @offset, @remaining, and @length fields). In general the data parts in
|
|
* spi_packet's are concatenated until @remaining is 0, and the result is an
|
|
* message.
|
|
*
|
|
* @flags: 0x40 = write (to device), 0x20 = read (from device); note that
|
|
* the response to a write still has 0x40.
|
|
* @device: 1 = keyboard, 2 = touchpad
|
|
* @offset: specifies the offset of this packet's data in the complete
|
|
* message; i.e. > 0 indicates this is a continuation packet (in
|
|
* the second packet for a message split over multiple packets
|
|
* this would then be the same as the @length in the first packet)
|
|
* @remaining: number of message bytes remaining in subsequents packets (in
|
|
* the first packet of a message split over two packets this would
|
|
* then be the same as the @length in the second packet)
|
|
* @length: length of the valid data in the @data in this packet
|
|
* @data: all or part of a message
|
|
* @crc16: crc over this whole structure minus this @crc16 field. This
|
|
* covers just this packet, even on multi-packet messages (in
|
|
* contrast to the crc in the message).
|
|
*/
|
|
struct spi_packet {
|
|
u8 flags;
|
|
u8 device;
|
|
__le16 offset;
|
|
__le16 remaining;
|
|
__le16 length;
|
|
u8 data[246];
|
|
__le16 crc16;
|
|
};
|
|
|
|
struct spi_settings {
|
|
u64 spi_cs_delay; /* cs-to-clk delay in us */
|
|
u64 reset_a2r_usec; /* active-to-receive delay? */
|
|
u64 reset_rec_usec; /* ? (cur val: 10) */
|
|
};
|
|
|
|
/* this mimics struct drm_rect */
|
|
struct applespi_tp_info {
|
|
int x_min;
|
|
int y_min;
|
|
int x_max;
|
|
int y_max;
|
|
};
|
|
|
|
struct applespi_data {
|
|
struct spi_device *spi;
|
|
struct spi_settings spi_settings;
|
|
struct input_dev *keyboard_input_dev;
|
|
struct input_dev *touchpad_input_dev;
|
|
|
|
u8 *tx_buffer;
|
|
u8 *tx_status;
|
|
u8 *rx_buffer;
|
|
|
|
u8 *msg_buf;
|
|
unsigned int saved_msg_len;
|
|
|
|
struct applespi_tp_info tp_info;
|
|
|
|
u8 last_keys_pressed[MAX_ROLLOVER];
|
|
u8 last_keys_fn_pressed[MAX_ROLLOVER];
|
|
u8 last_fn_pressed;
|
|
struct input_mt_pos pos[MAX_FINGERS];
|
|
int slots[MAX_FINGERS];
|
|
int gpe;
|
|
acpi_handle sien;
|
|
acpi_handle sist;
|
|
|
|
struct spi_transfer dl_t;
|
|
struct spi_transfer rd_t;
|
|
struct spi_message rd_m;
|
|
|
|
struct spi_transfer ww_t;
|
|
struct spi_transfer wd_t;
|
|
struct spi_transfer wr_t;
|
|
struct spi_transfer st_t;
|
|
struct spi_message wr_m;
|
|
|
|
bool want_tp_info_cmd;
|
|
bool want_mt_init_cmd;
|
|
bool want_cl_led_on;
|
|
bool have_cl_led_on;
|
|
unsigned int want_bl_level;
|
|
unsigned int have_bl_level;
|
|
unsigned int cmd_msg_cntr;
|
|
/* lock to protect the above parameters and flags below */
|
|
spinlock_t cmd_msg_lock;
|
|
bool cmd_msg_queued;
|
|
enum applespi_evt_type cmd_evt_type;
|
|
|
|
struct led_classdev backlight_info;
|
|
|
|
bool suspended;
|
|
bool drain;
|
|
wait_queue_head_t drain_complete;
|
|
bool read_active;
|
|
bool write_active;
|
|
|
|
struct work_struct work;
|
|
struct touchpad_info_protocol rcvd_tp_info;
|
|
|
|
struct dentry *debugfs_root;
|
|
bool debug_tp_dim;
|
|
char tp_dim_val[40];
|
|
int tp_dim_min_x;
|
|
int tp_dim_max_x;
|
|
int tp_dim_min_y;
|
|
int tp_dim_max_y;
|
|
};
|
|
|
|
static const unsigned char applespi_scancodes[] = {
|
|
0, 0, 0, 0,
|
|
KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
|
|
KEY_K, KEY_L, KEY_M, KEY_N, KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T,
|
|
KEY_U, KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z,
|
|
KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6, KEY_7, KEY_8, KEY_9, KEY_0,
|
|
KEY_ENTER, KEY_ESC, KEY_BACKSPACE, KEY_TAB, KEY_SPACE, KEY_MINUS,
|
|
KEY_EQUAL, KEY_LEFTBRACE, KEY_RIGHTBRACE, KEY_BACKSLASH, 0,
|
|
KEY_SEMICOLON, KEY_APOSTROPHE, KEY_GRAVE, KEY_COMMA, KEY_DOT, KEY_SLASH,
|
|
KEY_CAPSLOCK,
|
|
KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5, KEY_F6, KEY_F7, KEY_F8, KEY_F9,
|
|
KEY_F10, KEY_F11, KEY_F12, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
KEY_RIGHT, KEY_LEFT, KEY_DOWN, KEY_UP,
|
|
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_102ND,
|
|
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_RO, 0, KEY_YEN, 0, 0, 0, 0, 0,
|
|
0, KEY_KATAKANAHIRAGANA, KEY_MUHENKAN
|
|
};
|
|
|
|
/*
|
|
* This must have exactly as many entries as there are bits in
|
|
* struct keyboard_protocol.modifiers .
|
|
*/
|
|
static const unsigned char applespi_controlcodes[] = {
|
|
KEY_LEFTCTRL,
|
|
KEY_LEFTSHIFT,
|
|
KEY_LEFTALT,
|
|
KEY_LEFTMETA,
|
|
0,
|
|
KEY_RIGHTSHIFT,
|
|
KEY_RIGHTALT,
|
|
KEY_RIGHTMETA
|
|
};
|
|
|
|
struct applespi_key_translation {
|
|
u16 from;
|
|
u16 to;
|
|
u8 flags;
|
|
};
|
|
|
|
static const struct applespi_key_translation applespi_fn_codes[] = {
|
|
{ KEY_BACKSPACE, KEY_DELETE },
|
|
{ KEY_ENTER, KEY_INSERT },
|
|
{ KEY_F1, KEY_BRIGHTNESSDOWN, APPLE_FLAG_FKEY },
|
|
{ KEY_F2, KEY_BRIGHTNESSUP, APPLE_FLAG_FKEY },
|
|
{ KEY_F3, KEY_SCALE, APPLE_FLAG_FKEY },
|
|
{ KEY_F4, KEY_DASHBOARD, APPLE_FLAG_FKEY },
|
|
{ KEY_F5, KEY_KBDILLUMDOWN, APPLE_FLAG_FKEY },
|
|
{ KEY_F6, KEY_KBDILLUMUP, APPLE_FLAG_FKEY },
|
|
{ KEY_F7, KEY_PREVIOUSSONG, APPLE_FLAG_FKEY },
|
|
{ KEY_F8, KEY_PLAYPAUSE, APPLE_FLAG_FKEY },
|
|
{ KEY_F9, KEY_NEXTSONG, APPLE_FLAG_FKEY },
|
|
{ KEY_F10, KEY_MUTE, APPLE_FLAG_FKEY },
|
|
{ KEY_F11, KEY_VOLUMEDOWN, APPLE_FLAG_FKEY },
|
|
{ KEY_F12, KEY_VOLUMEUP, APPLE_FLAG_FKEY },
|
|
{ KEY_RIGHT, KEY_END },
|
|
{ KEY_LEFT, KEY_HOME },
|
|
{ KEY_DOWN, KEY_PAGEDOWN },
|
|
{ KEY_UP, KEY_PAGEUP },
|
|
{ }
|
|
};
|
|
|
|
static const struct applespi_key_translation apple_iso_keyboard[] = {
|
|
{ KEY_GRAVE, KEY_102ND },
|
|
{ KEY_102ND, KEY_GRAVE },
|
|
{ }
|
|
};
|
|
|
|
struct applespi_tp_model_info {
|
|
u16 model;
|
|
struct applespi_tp_info tp_info;
|
|
};
|
|
|
|
static const struct applespi_tp_model_info applespi_tp_models[] = {
|
|
{
|
|
.model = 0x04, /* MB8 MB9 MB10 */
|
|
.tp_info = { -5087, -182, 5579, 6089 },
|
|
},
|
|
{
|
|
.model = 0x05, /* MBP13,1 MBP13,2 MBP14,1 MBP14,2 */
|
|
.tp_info = { -6243, -170, 6749, 7685 },
|
|
},
|
|
{
|
|
.model = 0x06, /* MBP13,3 MBP14,3 */
|
|
.tp_info = { -7456, -163, 7976, 9283 },
|
|
},
|
|
{}
|
|
};
|
|
|
|
typedef void (*applespi_trace_fun)(enum applespi_evt_type,
|
|
enum applespi_pkt_type, u8 *, size_t);
|
|
|
|
static applespi_trace_fun applespi_get_trace_fun(enum applespi_evt_type type)
|
|
{
|
|
switch (type) {
|
|
case ET_CMD_TP_INI:
|
|
return trace_applespi_tp_ini_cmd;
|
|
case ET_CMD_BL:
|
|
return trace_applespi_backlight_cmd;
|
|
case ET_CMD_CL:
|
|
return trace_applespi_caps_lock_cmd;
|
|
case ET_RD_KEYB:
|
|
return trace_applespi_keyboard_data;
|
|
case ET_RD_TPAD:
|
|
return trace_applespi_touchpad_data;
|
|
case ET_RD_UNKN:
|
|
return trace_applespi_unknown_data;
|
|
default:
|
|
WARN_ONCE(1, "Unknown msg type %d", type);
|
|
return trace_applespi_unknown_data;
|
|
}
|
|
}
|
|
|
|
static void applespi_setup_read_txfrs(struct applespi_data *applespi)
|
|
{
|
|
struct spi_message *msg = &applespi->rd_m;
|
|
struct spi_transfer *dl_t = &applespi->dl_t;
|
|
struct spi_transfer *rd_t = &applespi->rd_t;
|
|
|
|
memset(dl_t, 0, sizeof(*dl_t));
|
|
memset(rd_t, 0, sizeof(*rd_t));
|
|
|
|
dl_t->delay_usecs = applespi->spi_settings.spi_cs_delay;
|
|
|
|
rd_t->rx_buf = applespi->rx_buffer;
|
|
rd_t->len = APPLESPI_PACKET_SIZE;
|
|
|
|
spi_message_init(msg);
|
|
spi_message_add_tail(dl_t, msg);
|
|
spi_message_add_tail(rd_t, msg);
|
|
}
|
|
|
|
static void applespi_setup_write_txfrs(struct applespi_data *applespi)
|
|
{
|
|
struct spi_message *msg = &applespi->wr_m;
|
|
struct spi_transfer *wt_t = &applespi->ww_t;
|
|
struct spi_transfer *dl_t = &applespi->wd_t;
|
|
struct spi_transfer *wr_t = &applespi->wr_t;
|
|
struct spi_transfer *st_t = &applespi->st_t;
|
|
|
|
memset(wt_t, 0, sizeof(*wt_t));
|
|
memset(dl_t, 0, sizeof(*dl_t));
|
|
memset(wr_t, 0, sizeof(*wr_t));
|
|
memset(st_t, 0, sizeof(*st_t));
|
|
|
|
/*
|
|
* All we need here is a delay at the beginning of the message before
|
|
* asserting cs. But the current spi API doesn't support this, so we
|
|
* end up with an extra unnecessary (but harmless) cs assertion and
|
|
* deassertion.
|
|
*/
|
|
wt_t->delay_usecs = SPI_RW_CHG_DELAY_US;
|
|
wt_t->cs_change = 1;
|
|
|
|
dl_t->delay_usecs = applespi->spi_settings.spi_cs_delay;
|
|
|
|
wr_t->tx_buf = applespi->tx_buffer;
|
|
wr_t->len = APPLESPI_PACKET_SIZE;
|
|
wr_t->delay_usecs = SPI_RW_CHG_DELAY_US;
|
|
|
|
st_t->rx_buf = applespi->tx_status;
|
|
st_t->len = APPLESPI_STATUS_SIZE;
|
|
|
|
spi_message_init(msg);
|
|
spi_message_add_tail(wt_t, msg);
|
|
spi_message_add_tail(dl_t, msg);
|
|
spi_message_add_tail(wr_t, msg);
|
|
spi_message_add_tail(st_t, msg);
|
|
}
|
|
|
|
static int applespi_async(struct applespi_data *applespi,
|
|
struct spi_message *message, void (*complete)(void *))
|
|
{
|
|
message->complete = complete;
|
|
message->context = applespi;
|
|
|
|
return spi_async(applespi->spi, message);
|
|
}
|
|
|
|
static inline bool applespi_check_write_status(struct applespi_data *applespi,
|
|
int sts)
|
|
{
|
|
static u8 status_ok[] = { 0xac, 0x27, 0x68, 0xd5 };
|
|
|
|
if (sts < 0) {
|
|
dev_warn(&applespi->spi->dev, "Error writing to device: %d\n",
|
|
sts);
|
|
return false;
|
|
}
|
|
|
|
if (memcmp(applespi->tx_status, status_ok, APPLESPI_STATUS_SIZE)) {
|
|
dev_warn(&applespi->spi->dev, "Error writing to device: %*ph\n",
|
|
APPLESPI_STATUS_SIZE, applespi->tx_status);
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static int applespi_get_spi_settings(struct applespi_data *applespi)
|
|
{
|
|
struct acpi_device *adev = ACPI_COMPANION(&applespi->spi->dev);
|
|
const union acpi_object *o;
|
|
struct spi_settings *settings = &applespi->spi_settings;
|
|
|
|
if (!acpi_dev_get_property(adev, "spiCSDelay", ACPI_TYPE_BUFFER, &o))
|
|
settings->spi_cs_delay = *(u64 *)o->buffer.pointer;
|
|
else
|
|
dev_warn(&applespi->spi->dev,
|
|
"Property spiCSDelay not found\n");
|
|
|
|
if (!acpi_dev_get_property(adev, "resetA2RUsec", ACPI_TYPE_BUFFER, &o))
|
|
settings->reset_a2r_usec = *(u64 *)o->buffer.pointer;
|
|
else
|
|
dev_warn(&applespi->spi->dev,
|
|
"Property resetA2RUsec not found\n");
|
|
|
|
if (!acpi_dev_get_property(adev, "resetRecUsec", ACPI_TYPE_BUFFER, &o))
|
|
settings->reset_rec_usec = *(u64 *)o->buffer.pointer;
|
|
else
|
|
dev_warn(&applespi->spi->dev,
|
|
"Property resetRecUsec not found\n");
|
|
|
|
dev_dbg(&applespi->spi->dev,
|
|
"SPI settings: spi_cs_delay=%llu reset_a2r_usec=%llu reset_rec_usec=%llu\n",
|
|
settings->spi_cs_delay, settings->reset_a2r_usec,
|
|
settings->reset_rec_usec);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int applespi_setup_spi(struct applespi_data *applespi)
|
|
{
|
|
int sts;
|
|
|
|
sts = applespi_get_spi_settings(applespi);
|
|
if (sts)
|
|
return sts;
|
|
|
|
spin_lock_init(&applespi->cmd_msg_lock);
|
|
init_waitqueue_head(&applespi->drain_complete);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int applespi_enable_spi(struct applespi_data *applespi)
|
|
{
|
|
acpi_status acpi_sts;
|
|
unsigned long long spi_status;
|
|
|
|
/* check if SPI is already enabled, so we can skip the delay below */
|
|
acpi_sts = acpi_evaluate_integer(applespi->sist, NULL, NULL,
|
|
&spi_status);
|
|
if (ACPI_SUCCESS(acpi_sts) && spi_status)
|
|
return 0;
|
|
|
|
/* SIEN(1) will enable SPI communication */
|
|
acpi_sts = acpi_execute_simple_method(applespi->sien, NULL, 1);
|
|
if (ACPI_FAILURE(acpi_sts)) {
|
|
dev_err(&applespi->spi->dev, "SIEN failed: %s\n",
|
|
acpi_format_exception(acpi_sts));
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* Allow the SPI interface to come up before returning. Without this
|
|
* delay, the SPI commands to enable multitouch mode may not reach
|
|
* the trackpad controller, causing pointer movement to break upon
|
|
* resume from sleep.
|
|
*/
|
|
msleep(50);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int applespi_send_cmd_msg(struct applespi_data *applespi);
|
|
|
|
static void applespi_msg_complete(struct applespi_data *applespi,
|
|
bool is_write_msg, bool is_read_compl)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&applespi->cmd_msg_lock, flags);
|
|
|
|
if (is_read_compl)
|
|
applespi->read_active = false;
|
|
if (is_write_msg)
|
|
applespi->write_active = false;
|
|
|
|
if (applespi->drain && !applespi->write_active)
|
|
wake_up_all(&applespi->drain_complete);
|
|
|
|
if (is_write_msg) {
|
|
applespi->cmd_msg_queued = false;
|
|
applespi_send_cmd_msg(applespi);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&applespi->cmd_msg_lock, flags);
|
|
}
|
|
|
|
static void applespi_async_write_complete(void *context)
|
|
{
|
|
struct applespi_data *applespi = context;
|
|
enum applespi_evt_type evt_type = applespi->cmd_evt_type;
|
|
|
|
applespi_get_trace_fun(evt_type)(evt_type, PT_WRITE,
|
|
applespi->tx_buffer,
|
|
APPLESPI_PACKET_SIZE);
|
|
applespi_get_trace_fun(evt_type)(evt_type, PT_STATUS,
|
|
applespi->tx_status,
|
|
APPLESPI_STATUS_SIZE);
|
|
|
|
if (!applespi_check_write_status(applespi, applespi->wr_m.status)) {
|
|
/*
|
|
* If we got an error, we presumably won't get the expected
|
|
* response message either.
|
|
*/
|
|
applespi_msg_complete(applespi, true, false);
|
|
}
|
|
}
|
|
|
|
static int applespi_send_cmd_msg(struct applespi_data *applespi)
|
|
{
|
|
u16 crc;
|
|
int sts;
|
|
struct spi_packet *packet = (struct spi_packet *)applespi->tx_buffer;
|
|
struct message *message = (struct message *)packet->data;
|
|
u16 msg_len;
|
|
u8 device;
|
|
|
|
/* check if draining */
|
|
if (applespi->drain)
|
|
return 0;
|
|
|
|
/* check whether send is in progress */
|
|
if (applespi->cmd_msg_queued)
|
|
return 0;
|
|
|
|
/* set up packet */
|
|
memset(packet, 0, APPLESPI_PACKET_SIZE);
|
|
|
|
/* are we processing init commands? */
|
|
if (applespi->want_tp_info_cmd) {
|
|
applespi->want_tp_info_cmd = false;
|
|
applespi->want_mt_init_cmd = true;
|
|
applespi->cmd_evt_type = ET_CMD_TP_INI;
|
|
|
|
/* build init command */
|
|
device = PACKET_DEV_INFO;
|
|
|
|
message->type = cpu_to_le16(0x1020);
|
|
msg_len = sizeof(message->tp_info_command);
|
|
|
|
message->zero = 0x02;
|
|
message->rsp_buf_len = cpu_to_le16(0x0200);
|
|
|
|
} else if (applespi->want_mt_init_cmd) {
|
|
applespi->want_mt_init_cmd = false;
|
|
applespi->cmd_evt_type = ET_CMD_TP_INI;
|
|
|
|
/* build init command */
|
|
device = PACKET_DEV_TPAD;
|
|
|
|
message->type = cpu_to_le16(0x0252);
|
|
msg_len = sizeof(message->init_mt_command);
|
|
|
|
message->init_mt_command.cmd = cpu_to_le16(0x0102);
|
|
|
|
/* do we need caps-lock command? */
|
|
} else if (applespi->want_cl_led_on != applespi->have_cl_led_on) {
|
|
applespi->have_cl_led_on = applespi->want_cl_led_on;
|
|
applespi->cmd_evt_type = ET_CMD_CL;
|
|
|
|
/* build led command */
|
|
device = PACKET_DEV_KEYB;
|
|
|
|
message->type = cpu_to_le16(0x0151);
|
|
msg_len = sizeof(message->capsl_command);
|
|
|
|
message->capsl_command.unknown = 0x01;
|
|
message->capsl_command.led = applespi->have_cl_led_on ? 2 : 0;
|
|
|
|
/* do we need backlight command? */
|
|
} else if (applespi->want_bl_level != applespi->have_bl_level) {
|
|
applespi->have_bl_level = applespi->want_bl_level;
|
|
applespi->cmd_evt_type = ET_CMD_BL;
|
|
|
|
/* build command buffer */
|
|
device = PACKET_DEV_KEYB;
|
|
|
|
message->type = cpu_to_le16(0xB051);
|
|
msg_len = sizeof(message->bl_command);
|
|
|
|
message->bl_command.const1 = cpu_to_le16(0x01B0);
|
|
message->bl_command.level =
|
|
cpu_to_le16(applespi->have_bl_level);
|
|
|
|
if (applespi->have_bl_level > 0)
|
|
message->bl_command.const2 = cpu_to_le16(0x01F4);
|
|
else
|
|
message->bl_command.const2 = cpu_to_le16(0x0001);
|
|
|
|
/* everything's up-to-date */
|
|
} else {
|
|
return 0;
|
|
}
|
|
|
|
/* finalize packet */
|
|
packet->flags = PACKET_TYPE_WRITE;
|
|
packet->device = device;
|
|
packet->length = cpu_to_le16(MSG_HEADER_SIZE + msg_len);
|
|
|
|
message->counter = applespi->cmd_msg_cntr++ % (U8_MAX + 1);
|
|
|
|
message->length = cpu_to_le16(msg_len - 2);
|
|
if (!message->rsp_buf_len)
|
|
message->rsp_buf_len = message->length;
|
|
|
|
crc = crc16(0, (u8 *)message, le16_to_cpu(packet->length) - 2);
|
|
put_unaligned_le16(crc, &message->data[msg_len - 2]);
|
|
|
|
crc = crc16(0, (u8 *)packet, sizeof(*packet) - 2);
|
|
packet->crc16 = cpu_to_le16(crc);
|
|
|
|
/* send command */
|
|
sts = applespi_async(applespi, &applespi->wr_m,
|
|
applespi_async_write_complete);
|
|
if (sts) {
|
|
dev_warn(&applespi->spi->dev,
|
|
"Error queueing async write to device: %d\n", sts);
|
|
return sts;
|
|
}
|
|
|
|
applespi->cmd_msg_queued = true;
|
|
applespi->write_active = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void applespi_init(struct applespi_data *applespi, bool is_resume)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&applespi->cmd_msg_lock, flags);
|
|
|
|
if (is_resume)
|
|
applespi->want_mt_init_cmd = true;
|
|
else
|
|
applespi->want_tp_info_cmd = true;
|
|
applespi_send_cmd_msg(applespi);
|
|
|
|
spin_unlock_irqrestore(&applespi->cmd_msg_lock, flags);
|
|
}
|
|
|
|
static int applespi_set_capsl_led(struct applespi_data *applespi,
|
|
bool capslock_on)
|
|
{
|
|
unsigned long flags;
|
|
int sts;
|
|
|
|
spin_lock_irqsave(&applespi->cmd_msg_lock, flags);
|
|
|
|
applespi->want_cl_led_on = capslock_on;
|
|
sts = applespi_send_cmd_msg(applespi);
|
|
|
|
spin_unlock_irqrestore(&applespi->cmd_msg_lock, flags);
|
|
|
|
return sts;
|
|
}
|
|
|
|
static void applespi_set_bl_level(struct led_classdev *led_cdev,
|
|
enum led_brightness value)
|
|
{
|
|
struct applespi_data *applespi =
|
|
container_of(led_cdev, struct applespi_data, backlight_info);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&applespi->cmd_msg_lock, flags);
|
|
|
|
if (value == 0) {
|
|
applespi->want_bl_level = value;
|
|
} else {
|
|
/*
|
|
* The backlight does not turn on till level 32, so we scale
|
|
* the range here so that from a user's perspective it turns
|
|
* on at 1.
|
|
*/
|
|
applespi->want_bl_level =
|
|
((value * KBD_BL_LEVEL_ADJ) / KBD_BL_LEVEL_SCALE +
|
|
KBD_BL_LEVEL_MIN);
|
|
}
|
|
|
|
applespi_send_cmd_msg(applespi);
|
|
|
|
spin_unlock_irqrestore(&applespi->cmd_msg_lock, flags);
|
|
}
|
|
|
|
static int applespi_event(struct input_dev *dev, unsigned int type,
|
|
unsigned int code, int value)
|
|
{
|
|
struct applespi_data *applespi = input_get_drvdata(dev);
|
|
|
|
switch (type) {
|
|
case EV_LED:
|
|
applespi_set_capsl_led(applespi, !!test_bit(LED_CAPSL, dev->led));
|
|
return 0;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* lifted from the BCM5974 driver and renamed from raw2int */
|
|
/* convert 16-bit little endian to signed integer */
|
|
static inline int le16_to_int(__le16 x)
|
|
{
|
|
return (signed short)le16_to_cpu(x);
|
|
}
|
|
|
|
static void applespi_debug_update_dimensions(struct applespi_data *applespi,
|
|
const struct tp_finger *f)
|
|
{
|
|
applespi->tp_dim_min_x = min(applespi->tp_dim_min_x,
|
|
le16_to_int(f->abs_x));
|
|
applespi->tp_dim_max_x = max(applespi->tp_dim_max_x,
|
|
le16_to_int(f->abs_x));
|
|
applespi->tp_dim_min_y = min(applespi->tp_dim_min_y,
|
|
le16_to_int(f->abs_y));
|
|
applespi->tp_dim_max_y = max(applespi->tp_dim_max_y,
|
|
le16_to_int(f->abs_y));
|
|
}
|
|
|
|
static int applespi_tp_dim_open(struct inode *inode, struct file *file)
|
|
{
|
|
struct applespi_data *applespi = inode->i_private;
|
|
|
|
file->private_data = applespi;
|
|
|
|
snprintf(applespi->tp_dim_val, sizeof(applespi->tp_dim_val),
|
|
"0x%.4x %dx%d+%u+%u\n",
|
|
applespi->touchpad_input_dev->id.product,
|
|
applespi->tp_dim_min_x, applespi->tp_dim_min_y,
|
|
applespi->tp_dim_max_x - applespi->tp_dim_min_x,
|
|
applespi->tp_dim_max_y - applespi->tp_dim_min_y);
|
|
|
|
return nonseekable_open(inode, file);
|
|
}
|
|
|
|
static ssize_t applespi_tp_dim_read(struct file *file, char __user *buf,
|
|
size_t len, loff_t *off)
|
|
{
|
|
struct applespi_data *applespi = file->private_data;
|
|
|
|
return simple_read_from_buffer(buf, len, off, applespi->tp_dim_val,
|
|
strlen(applespi->tp_dim_val));
|
|
}
|
|
|
|
static const struct file_operations applespi_tp_dim_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = applespi_tp_dim_open,
|
|
.read = applespi_tp_dim_read,
|
|
.llseek = no_llseek,
|
|
};
|
|
|
|
static void report_finger_data(struct input_dev *input, int slot,
|
|
const struct input_mt_pos *pos,
|
|
const struct tp_finger *f)
|
|
{
|
|
input_mt_slot(input, slot);
|
|
input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
|
|
|
|
input_report_abs(input, ABS_MT_TOUCH_MAJOR,
|
|
le16_to_int(f->touch_major) << 1);
|
|
input_report_abs(input, ABS_MT_TOUCH_MINOR,
|
|
le16_to_int(f->touch_minor) << 1);
|
|
input_report_abs(input, ABS_MT_WIDTH_MAJOR,
|
|
le16_to_int(f->tool_major) << 1);
|
|
input_report_abs(input, ABS_MT_WIDTH_MINOR,
|
|
le16_to_int(f->tool_minor) << 1);
|
|
input_report_abs(input, ABS_MT_ORIENTATION,
|
|
MAX_FINGER_ORIENTATION - le16_to_int(f->orientation));
|
|
input_report_abs(input, ABS_MT_POSITION_X, pos->x);
|
|
input_report_abs(input, ABS_MT_POSITION_Y, pos->y);
|
|
}
|
|
|
|
static void report_tp_state(struct applespi_data *applespi,
|
|
struct touchpad_protocol *t)
|
|
{
|
|
const struct tp_finger *f;
|
|
struct input_dev *input;
|
|
const struct applespi_tp_info *tp_info = &applespi->tp_info;
|
|
int i, n;
|
|
|
|
/* touchpad_input_dev is set async in worker */
|
|
input = smp_load_acquire(&applespi->touchpad_input_dev);
|
|
if (!input)
|
|
return; /* touchpad isn't initialized yet */
|
|
|
|
n = 0;
|
|
|
|
for (i = 0; i < t->number_of_fingers; i++) {
|
|
f = &t->fingers[i];
|
|
if (le16_to_int(f->touch_major) == 0)
|
|
continue;
|
|
applespi->pos[n].x = le16_to_int(f->abs_x);
|
|
applespi->pos[n].y = tp_info->y_min + tp_info->y_max -
|
|
le16_to_int(f->abs_y);
|
|
n++;
|
|
|
|
if (applespi->debug_tp_dim)
|
|
applespi_debug_update_dimensions(applespi, f);
|
|
}
|
|
|
|
input_mt_assign_slots(input, applespi->slots, applespi->pos, n, 0);
|
|
|
|
for (i = 0; i < n; i++)
|
|
report_finger_data(input, applespi->slots[i],
|
|
&applespi->pos[i], &t->fingers[i]);
|
|
|
|
input_mt_sync_frame(input);
|
|
input_report_key(input, BTN_LEFT, t->clicked);
|
|
|
|
input_sync(input);
|
|
}
|
|
|
|
static const struct applespi_key_translation *
|
|
applespi_find_translation(const struct applespi_key_translation *table, u16 key)
|
|
{
|
|
const struct applespi_key_translation *trans;
|
|
|
|
for (trans = table; trans->from; trans++)
|
|
if (trans->from == key)
|
|
return trans;
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static unsigned int applespi_translate_fn_key(unsigned int key, int fn_pressed)
|
|
{
|
|
const struct applespi_key_translation *trans;
|
|
int do_translate;
|
|
|
|
trans = applespi_find_translation(applespi_fn_codes, key);
|
|
if (trans) {
|
|
if (trans->flags & APPLE_FLAG_FKEY)
|
|
do_translate = (fnmode == 2 && fn_pressed) ||
|
|
(fnmode == 1 && !fn_pressed);
|
|
else
|
|
do_translate = fn_pressed;
|
|
|
|
if (do_translate)
|
|
key = trans->to;
|
|
}
|
|
|
|
return key;
|
|
}
|
|
|
|
static unsigned int applespi_translate_iso_layout(unsigned int key)
|
|
{
|
|
const struct applespi_key_translation *trans;
|
|
|
|
trans = applespi_find_translation(apple_iso_keyboard, key);
|
|
if (trans)
|
|
key = trans->to;
|
|
|
|
return key;
|
|
}
|
|
|
|
static unsigned int applespi_code_to_key(u8 code, int fn_pressed)
|
|
{
|
|
unsigned int key = applespi_scancodes[code];
|
|
|
|
if (fnmode)
|
|
key = applespi_translate_fn_key(key, fn_pressed);
|
|
if (iso_layout)
|
|
key = applespi_translate_iso_layout(key);
|
|
return key;
|
|
}
|
|
|
|
static void
|
|
applespi_remap_fn_key(struct keyboard_protocol *keyboard_protocol)
|
|
{
|
|
unsigned char tmp;
|
|
u8 bit = BIT((fnremap - 1) & 0x07);
|
|
|
|
if (!fnremap || fnremap > ARRAY_SIZE(applespi_controlcodes) ||
|
|
!applespi_controlcodes[fnremap - 1])
|
|
return;
|
|
|
|
tmp = keyboard_protocol->fn_pressed;
|
|
keyboard_protocol->fn_pressed = !!(keyboard_protocol->modifiers & bit);
|
|
if (tmp)
|
|
keyboard_protocol->modifiers |= bit;
|
|
else
|
|
keyboard_protocol->modifiers &= ~bit;
|
|
}
|
|
|
|
static void
|
|
applespi_handle_keyboard_event(struct applespi_data *applespi,
|
|
struct keyboard_protocol *keyboard_protocol)
|
|
{
|
|
unsigned int key;
|
|
int i;
|
|
|
|
compiletime_assert(ARRAY_SIZE(applespi_controlcodes) ==
|
|
sizeof_field(struct keyboard_protocol, modifiers) * 8,
|
|
"applespi_controlcodes has wrong number of entries");
|
|
|
|
/* check for rollover overflow, which is signalled by all keys == 1 */
|
|
if (!memchr_inv(keyboard_protocol->keys_pressed, 1, MAX_ROLLOVER))
|
|
return;
|
|
|
|
/* remap fn key if desired */
|
|
applespi_remap_fn_key(keyboard_protocol);
|
|
|
|
/* check released keys */
|
|
for (i = 0; i < MAX_ROLLOVER; i++) {
|
|
if (memchr(keyboard_protocol->keys_pressed,
|
|
applespi->last_keys_pressed[i], MAX_ROLLOVER))
|
|
continue; /* key is still pressed */
|
|
|
|
key = applespi_code_to_key(applespi->last_keys_pressed[i],
|
|
applespi->last_keys_fn_pressed[i]);
|
|
input_report_key(applespi->keyboard_input_dev, key, 0);
|
|
applespi->last_keys_fn_pressed[i] = 0;
|
|
}
|
|
|
|
/* check pressed keys */
|
|
for (i = 0; i < MAX_ROLLOVER; i++) {
|
|
if (keyboard_protocol->keys_pressed[i] <
|
|
ARRAY_SIZE(applespi_scancodes) &&
|
|
keyboard_protocol->keys_pressed[i] > 0) {
|
|
key = applespi_code_to_key(
|
|
keyboard_protocol->keys_pressed[i],
|
|
keyboard_protocol->fn_pressed);
|
|
input_report_key(applespi->keyboard_input_dev, key, 1);
|
|
applespi->last_keys_fn_pressed[i] =
|
|
keyboard_protocol->fn_pressed;
|
|
}
|
|
}
|
|
|
|
/* check control keys */
|
|
for (i = 0; i < ARRAY_SIZE(applespi_controlcodes); i++) {
|
|
if (keyboard_protocol->modifiers & BIT(i))
|
|
input_report_key(applespi->keyboard_input_dev,
|
|
applespi_controlcodes[i], 1);
|
|
else
|
|
input_report_key(applespi->keyboard_input_dev,
|
|
applespi_controlcodes[i], 0);
|
|
}
|
|
|
|
/* check function key */
|
|
if (keyboard_protocol->fn_pressed && !applespi->last_fn_pressed)
|
|
input_report_key(applespi->keyboard_input_dev, KEY_FN, 1);
|
|
else if (!keyboard_protocol->fn_pressed && applespi->last_fn_pressed)
|
|
input_report_key(applespi->keyboard_input_dev, KEY_FN, 0);
|
|
applespi->last_fn_pressed = keyboard_protocol->fn_pressed;
|
|
|
|
/* done */
|
|
input_sync(applespi->keyboard_input_dev);
|
|
memcpy(&applespi->last_keys_pressed, keyboard_protocol->keys_pressed,
|
|
sizeof(applespi->last_keys_pressed));
|
|
}
|
|
|
|
static const struct applespi_tp_info *applespi_find_touchpad_info(u8 model)
|
|
{
|
|
const struct applespi_tp_model_info *info;
|
|
|
|
for (info = applespi_tp_models; info->model; info++) {
|
|
if (info->model == model)
|
|
return &info->tp_info;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static int
|
|
applespi_register_touchpad_device(struct applespi_data *applespi,
|
|
struct touchpad_info_protocol *rcvd_tp_info)
|
|
{
|
|
const struct applespi_tp_info *tp_info;
|
|
struct input_dev *touchpad_input_dev;
|
|
int sts;
|
|
|
|
/* set up touchpad dimensions */
|
|
tp_info = applespi_find_touchpad_info(rcvd_tp_info->model_no);
|
|
if (!tp_info) {
|
|
dev_warn(&applespi->spi->dev,
|
|
"Unknown touchpad model %x - falling back to MB8 touchpad\n",
|
|
rcvd_tp_info->model_no);
|
|
tp_info = &applespi_tp_models[0].tp_info;
|
|
}
|
|
|
|
applespi->tp_info = *tp_info;
|
|
|
|
if (touchpad_dimensions[0]) {
|
|
int x, y, w, h;
|
|
|
|
sts = sscanf(touchpad_dimensions, "%dx%d+%u+%u", &x, &y, &w, &h);
|
|
if (sts == 4) {
|
|
dev_info(&applespi->spi->dev,
|
|
"Overriding touchpad dimensions from module param\n");
|
|
applespi->tp_info.x_min = x;
|
|
applespi->tp_info.y_min = y;
|
|
applespi->tp_info.x_max = x + w;
|
|
applespi->tp_info.y_max = y + h;
|
|
} else {
|
|
dev_warn(&applespi->spi->dev,
|
|
"Invalid touchpad dimensions '%s': must be in the form XxY+W+H\n",
|
|
touchpad_dimensions);
|
|
touchpad_dimensions[0] = '\0';
|
|
}
|
|
}
|
|
if (!touchpad_dimensions[0]) {
|
|
snprintf(touchpad_dimensions, sizeof(touchpad_dimensions),
|
|
"%dx%d+%u+%u",
|
|
applespi->tp_info.x_min,
|
|
applespi->tp_info.y_min,
|
|
applespi->tp_info.x_max - applespi->tp_info.x_min,
|
|
applespi->tp_info.y_max - applespi->tp_info.y_min);
|
|
}
|
|
|
|
/* create touchpad input device */
|
|
touchpad_input_dev = devm_input_allocate_device(&applespi->spi->dev);
|
|
if (!touchpad_input_dev) {
|
|
dev_err(&applespi->spi->dev,
|
|
"Failed to allocate touchpad input device\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
touchpad_input_dev->name = "Apple SPI Touchpad";
|
|
touchpad_input_dev->phys = "applespi/input1";
|
|
touchpad_input_dev->dev.parent = &applespi->spi->dev;
|
|
touchpad_input_dev->id.bustype = BUS_SPI;
|
|
touchpad_input_dev->id.vendor = SYNAPTICS_VENDOR_ID;
|
|
touchpad_input_dev->id.product =
|
|
rcvd_tp_info->model_no << 8 | rcvd_tp_info->model_flags;
|
|
|
|
/* basic properties */
|
|
input_set_capability(touchpad_input_dev, EV_REL, REL_X);
|
|
input_set_capability(touchpad_input_dev, EV_REL, REL_Y);
|
|
|
|
__set_bit(INPUT_PROP_POINTER, touchpad_input_dev->propbit);
|
|
__set_bit(INPUT_PROP_BUTTONPAD, touchpad_input_dev->propbit);
|
|
|
|
/* finger touch area */
|
|
input_set_abs_params(touchpad_input_dev, ABS_MT_TOUCH_MAJOR,
|
|
0, 5000, 0, 0);
|
|
input_set_abs_params(touchpad_input_dev, ABS_MT_TOUCH_MINOR,
|
|
0, 5000, 0, 0);
|
|
|
|
/* finger approach area */
|
|
input_set_abs_params(touchpad_input_dev, ABS_MT_WIDTH_MAJOR,
|
|
0, 5000, 0, 0);
|
|
input_set_abs_params(touchpad_input_dev, ABS_MT_WIDTH_MINOR,
|
|
0, 5000, 0, 0);
|
|
|
|
/* finger orientation */
|
|
input_set_abs_params(touchpad_input_dev, ABS_MT_ORIENTATION,
|
|
-MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION,
|
|
0, 0);
|
|
|
|
/* finger position */
|
|
input_set_abs_params(touchpad_input_dev, ABS_MT_POSITION_X,
|
|
applespi->tp_info.x_min, applespi->tp_info.x_max,
|
|
0, 0);
|
|
input_set_abs_params(touchpad_input_dev, ABS_MT_POSITION_Y,
|
|
applespi->tp_info.y_min, applespi->tp_info.y_max,
|
|
0, 0);
|
|
|
|
/* touchpad button */
|
|
input_set_capability(touchpad_input_dev, EV_KEY, BTN_LEFT);
|
|
|
|
/* multitouch */
|
|
sts = input_mt_init_slots(touchpad_input_dev, MAX_FINGERS,
|
|
INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED |
|
|
INPUT_MT_TRACK);
|
|
if (sts) {
|
|
dev_err(&applespi->spi->dev,
|
|
"failed to initialize slots: %d", sts);
|
|
return sts;
|
|
}
|
|
|
|
/* register input device */
|
|
sts = input_register_device(touchpad_input_dev);
|
|
if (sts) {
|
|
dev_err(&applespi->spi->dev,
|
|
"Unable to register touchpad input device (%d)\n", sts);
|
|
return sts;
|
|
}
|
|
|
|
/* touchpad_input_dev is read async in spi callback */
|
|
smp_store_release(&applespi->touchpad_input_dev, touchpad_input_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void applespi_worker(struct work_struct *work)
|
|
{
|
|
struct applespi_data *applespi =
|
|
container_of(work, struct applespi_data, work);
|
|
|
|
applespi_register_touchpad_device(applespi, &applespi->rcvd_tp_info);
|
|
}
|
|
|
|
static void applespi_handle_cmd_response(struct applespi_data *applespi,
|
|
struct spi_packet *packet,
|
|
struct message *message)
|
|
{
|
|
if (packet->device == PACKET_DEV_INFO &&
|
|
le16_to_cpu(message->type) == 0x1020) {
|
|
/*
|
|
* We're not allowed to sleep here, but registering an input
|
|
* device can sleep.
|
|
*/
|
|
applespi->rcvd_tp_info = message->tp_info;
|
|
schedule_work(&applespi->work);
|
|
return;
|
|
}
|
|
|
|
if (le16_to_cpu(message->length) != 0x0000) {
|
|
dev_warn_ratelimited(&applespi->spi->dev,
|
|
"Received unexpected write response: length=%x\n",
|
|
le16_to_cpu(message->length));
|
|
return;
|
|
}
|
|
|
|
if (packet->device == PACKET_DEV_TPAD &&
|
|
le16_to_cpu(message->type) == 0x0252 &&
|
|
le16_to_cpu(message->rsp_buf_len) == 0x0002)
|
|
dev_info(&applespi->spi->dev, "modeswitch done.\n");
|
|
}
|
|
|
|
static bool applespi_verify_crc(struct applespi_data *applespi, u8 *buffer,
|
|
size_t buflen)
|
|
{
|
|
u16 crc;
|
|
|
|
crc = crc16(0, buffer, buflen);
|
|
if (crc) {
|
|
dev_warn_ratelimited(&applespi->spi->dev,
|
|
"Received corrupted packet (crc mismatch)\n");
|
|
trace_applespi_bad_crc(ET_RD_CRC, READ, buffer, buflen);
|
|
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static void applespi_debug_print_read_packet(struct applespi_data *applespi,
|
|
struct spi_packet *packet)
|
|
{
|
|
unsigned int evt_type;
|
|
|
|
if (packet->flags == PACKET_TYPE_READ &&
|
|
packet->device == PACKET_DEV_KEYB)
|
|
evt_type = ET_RD_KEYB;
|
|
else if (packet->flags == PACKET_TYPE_READ &&
|
|
packet->device == PACKET_DEV_TPAD)
|
|
evt_type = ET_RD_TPAD;
|
|
else if (packet->flags == PACKET_TYPE_WRITE)
|
|
evt_type = applespi->cmd_evt_type;
|
|
else
|
|
evt_type = ET_RD_UNKN;
|
|
|
|
applespi_get_trace_fun(evt_type)(evt_type, PT_READ, applespi->rx_buffer,
|
|
APPLESPI_PACKET_SIZE);
|
|
}
|
|
|
|
static void applespi_got_data(struct applespi_data *applespi)
|
|
{
|
|
struct spi_packet *packet;
|
|
struct message *message;
|
|
unsigned int msg_len;
|
|
unsigned int off;
|
|
unsigned int rem;
|
|
unsigned int len;
|
|
|
|
/* process packet header */
|
|
if (!applespi_verify_crc(applespi, applespi->rx_buffer,
|
|
APPLESPI_PACKET_SIZE)) {
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&applespi->cmd_msg_lock, flags);
|
|
|
|
if (applespi->drain) {
|
|
applespi->read_active = false;
|
|
applespi->write_active = false;
|
|
|
|
wake_up_all(&applespi->drain_complete);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&applespi->cmd_msg_lock, flags);
|
|
|
|
return;
|
|
}
|
|
|
|
packet = (struct spi_packet *)applespi->rx_buffer;
|
|
|
|
applespi_debug_print_read_packet(applespi, packet);
|
|
|
|
off = le16_to_cpu(packet->offset);
|
|
rem = le16_to_cpu(packet->remaining);
|
|
len = le16_to_cpu(packet->length);
|
|
|
|
if (len > sizeof(packet->data)) {
|
|
dev_warn_ratelimited(&applespi->spi->dev,
|
|
"Received corrupted packet (invalid packet length %u)\n",
|
|
len);
|
|
goto msg_complete;
|
|
}
|
|
|
|
/* handle multi-packet messages */
|
|
if (rem > 0 || off > 0) {
|
|
if (off != applespi->saved_msg_len) {
|
|
dev_warn_ratelimited(&applespi->spi->dev,
|
|
"Received unexpected offset (got %u, expected %u)\n",
|
|
off, applespi->saved_msg_len);
|
|
goto msg_complete;
|
|
}
|
|
|
|
if (off + rem > MAX_PKTS_PER_MSG * APPLESPI_PACKET_SIZE) {
|
|
dev_warn_ratelimited(&applespi->spi->dev,
|
|
"Received message too large (size %u)\n",
|
|
off + rem);
|
|
goto msg_complete;
|
|
}
|
|
|
|
if (off + len > MAX_PKTS_PER_MSG * APPLESPI_PACKET_SIZE) {
|
|
dev_warn_ratelimited(&applespi->spi->dev,
|
|
"Received message too large (size %u)\n",
|
|
off + len);
|
|
goto msg_complete;
|
|
}
|
|
|
|
memcpy(applespi->msg_buf + off, &packet->data, len);
|
|
applespi->saved_msg_len += len;
|
|
|
|
if (rem > 0)
|
|
return;
|
|
|
|
message = (struct message *)applespi->msg_buf;
|
|
msg_len = applespi->saved_msg_len;
|
|
} else {
|
|
message = (struct message *)&packet->data;
|
|
msg_len = len;
|
|
}
|
|
|
|
/* got complete message - verify */
|
|
if (!applespi_verify_crc(applespi, (u8 *)message, msg_len))
|
|
goto msg_complete;
|
|
|
|
if (le16_to_cpu(message->length) != msg_len - MSG_HEADER_SIZE - 2) {
|
|
dev_warn_ratelimited(&applespi->spi->dev,
|
|
"Received corrupted packet (invalid message length %u - expected %u)\n",
|
|
le16_to_cpu(message->length),
|
|
msg_len - MSG_HEADER_SIZE - 2);
|
|
goto msg_complete;
|
|
}
|
|
|
|
/* handle message */
|
|
if (packet->flags == PACKET_TYPE_READ &&
|
|
packet->device == PACKET_DEV_KEYB) {
|
|
applespi_handle_keyboard_event(applespi, &message->keyboard);
|
|
|
|
} else if (packet->flags == PACKET_TYPE_READ &&
|
|
packet->device == PACKET_DEV_TPAD) {
|
|
struct touchpad_protocol *tp;
|
|
size_t tp_len;
|
|
|
|
tp = &message->touchpad;
|
|
tp_len = struct_size(tp, fingers, tp->number_of_fingers);
|
|
|
|
if (le16_to_cpu(message->length) + 2 != tp_len) {
|
|
dev_warn_ratelimited(&applespi->spi->dev,
|
|
"Received corrupted packet (invalid message length %u - num-fingers %u, tp-len %zu)\n",
|
|
le16_to_cpu(message->length),
|
|
tp->number_of_fingers, tp_len);
|
|
goto msg_complete;
|
|
}
|
|
|
|
if (tp->number_of_fingers > MAX_FINGERS) {
|
|
dev_warn_ratelimited(&applespi->spi->dev,
|
|
"Number of reported fingers (%u) exceeds max (%u))\n",
|
|
tp->number_of_fingers,
|
|
MAX_FINGERS);
|
|
tp->number_of_fingers = MAX_FINGERS;
|
|
}
|
|
|
|
report_tp_state(applespi, tp);
|
|
|
|
} else if (packet->flags == PACKET_TYPE_WRITE) {
|
|
applespi_handle_cmd_response(applespi, packet, message);
|
|
}
|
|
|
|
msg_complete:
|
|
applespi->saved_msg_len = 0;
|
|
|
|
applespi_msg_complete(applespi, packet->flags == PACKET_TYPE_WRITE,
|
|
true);
|
|
}
|
|
|
|
static void applespi_async_read_complete(void *context)
|
|
{
|
|
struct applespi_data *applespi = context;
|
|
|
|
if (applespi->rd_m.status < 0) {
|
|
dev_warn(&applespi->spi->dev, "Error reading from device: %d\n",
|
|
applespi->rd_m.status);
|
|
/*
|
|
* We don't actually know if this was a pure read, or a response
|
|
* to a write. But this is a rare error condition that should
|
|
* never occur, so clearing both flags to avoid deadlock.
|
|
*/
|
|
applespi_msg_complete(applespi, true, true);
|
|
} else {
|
|
applespi_got_data(applespi);
|
|
}
|
|
|
|
acpi_finish_gpe(NULL, applespi->gpe);
|
|
}
|
|
|
|
static u32 applespi_notify(acpi_handle gpe_device, u32 gpe, void *context)
|
|
{
|
|
struct applespi_data *applespi = context;
|
|
int sts;
|
|
unsigned long flags;
|
|
|
|
trace_applespi_irq_received(ET_RD_IRQ, PT_READ);
|
|
|
|
spin_lock_irqsave(&applespi->cmd_msg_lock, flags);
|
|
|
|
if (!applespi->suspended) {
|
|
sts = applespi_async(applespi, &applespi->rd_m,
|
|
applespi_async_read_complete);
|
|
if (sts)
|
|
dev_warn(&applespi->spi->dev,
|
|
"Error queueing async read to device: %d\n",
|
|
sts);
|
|
else
|
|
applespi->read_active = true;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&applespi->cmd_msg_lock, flags);
|
|
|
|
return ACPI_INTERRUPT_HANDLED;
|
|
}
|
|
|
|
static int applespi_get_saved_bl_level(struct applespi_data *applespi)
|
|
{
|
|
struct efivar_entry *efivar_entry;
|
|
u16 efi_data = 0;
|
|
unsigned long efi_data_len;
|
|
int sts;
|
|
|
|
efivar_entry = kmalloc(sizeof(*efivar_entry), GFP_KERNEL);
|
|
if (!efivar_entry)
|
|
return -ENOMEM;
|
|
|
|
memcpy(efivar_entry->var.VariableName, EFI_BL_LEVEL_NAME,
|
|
sizeof(EFI_BL_LEVEL_NAME));
|
|
efivar_entry->var.VendorGuid = EFI_BL_LEVEL_GUID;
|
|
efi_data_len = sizeof(efi_data);
|
|
|
|
sts = efivar_entry_get(efivar_entry, NULL, &efi_data_len, &efi_data);
|
|
if (sts && sts != -ENOENT)
|
|
dev_warn(&applespi->spi->dev,
|
|
"Error getting backlight level from EFI vars: %d\n",
|
|
sts);
|
|
|
|
kfree(efivar_entry);
|
|
|
|
return sts ? sts : efi_data;
|
|
}
|
|
|
|
static void applespi_save_bl_level(struct applespi_data *applespi,
|
|
unsigned int level)
|
|
{
|
|
efi_guid_t efi_guid;
|
|
u32 efi_attr;
|
|
unsigned long efi_data_len;
|
|
u16 efi_data;
|
|
int sts;
|
|
|
|
/* Save keyboard backlight level */
|
|
efi_guid = EFI_BL_LEVEL_GUID;
|
|
efi_data = (u16)level;
|
|
efi_data_len = sizeof(efi_data);
|
|
efi_attr = EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_BOOTSERVICE_ACCESS |
|
|
EFI_VARIABLE_RUNTIME_ACCESS;
|
|
|
|
sts = efivar_entry_set_safe((efi_char16_t *)EFI_BL_LEVEL_NAME, efi_guid,
|
|
efi_attr, true, efi_data_len, &efi_data);
|
|
if (sts)
|
|
dev_warn(&applespi->spi->dev,
|
|
"Error saving backlight level to EFI vars: %d\n", sts);
|
|
}
|
|
|
|
static int applespi_probe(struct spi_device *spi)
|
|
{
|
|
struct applespi_data *applespi;
|
|
acpi_handle spi_handle = ACPI_HANDLE(&spi->dev);
|
|
acpi_status acpi_sts;
|
|
int sts, i;
|
|
unsigned long long gpe, usb_status;
|
|
|
|
/* check if the USB interface is present and enabled already */
|
|
acpi_sts = acpi_evaluate_integer(spi_handle, "UIST", NULL, &usb_status);
|
|
if (ACPI_SUCCESS(acpi_sts) && usb_status) {
|
|
/* let the USB driver take over instead */
|
|
dev_info(&spi->dev, "USB interface already enabled\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* allocate driver data */
|
|
applespi = devm_kzalloc(&spi->dev, sizeof(*applespi), GFP_KERNEL);
|
|
if (!applespi)
|
|
return -ENOMEM;
|
|
|
|
applespi->spi = spi;
|
|
|
|
INIT_WORK(&applespi->work, applespi_worker);
|
|
|
|
/* store the driver data */
|
|
spi_set_drvdata(spi, applespi);
|
|
|
|
/* create our buffers */
|
|
applespi->tx_buffer = devm_kmalloc(&spi->dev, APPLESPI_PACKET_SIZE,
|
|
GFP_KERNEL);
|
|
applespi->tx_status = devm_kmalloc(&spi->dev, APPLESPI_STATUS_SIZE,
|
|
GFP_KERNEL);
|
|
applespi->rx_buffer = devm_kmalloc(&spi->dev, APPLESPI_PACKET_SIZE,
|
|
GFP_KERNEL);
|
|
applespi->msg_buf = devm_kmalloc_array(&spi->dev, MAX_PKTS_PER_MSG,
|
|
APPLESPI_PACKET_SIZE,
|
|
GFP_KERNEL);
|
|
|
|
if (!applespi->tx_buffer || !applespi->tx_status ||
|
|
!applespi->rx_buffer || !applespi->msg_buf)
|
|
return -ENOMEM;
|
|
|
|
/* set up our spi messages */
|
|
applespi_setup_read_txfrs(applespi);
|
|
applespi_setup_write_txfrs(applespi);
|
|
|
|
/* cache ACPI method handles */
|
|
acpi_sts = acpi_get_handle(spi_handle, "SIEN", &applespi->sien);
|
|
if (ACPI_FAILURE(acpi_sts)) {
|
|
dev_err(&applespi->spi->dev,
|
|
"Failed to get SIEN ACPI method handle: %s\n",
|
|
acpi_format_exception(acpi_sts));
|
|
return -ENODEV;
|
|
}
|
|
|
|
acpi_sts = acpi_get_handle(spi_handle, "SIST", &applespi->sist);
|
|
if (ACPI_FAILURE(acpi_sts)) {
|
|
dev_err(&applespi->spi->dev,
|
|
"Failed to get SIST ACPI method handle: %s\n",
|
|
acpi_format_exception(acpi_sts));
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* switch on the SPI interface */
|
|
sts = applespi_setup_spi(applespi);
|
|
if (sts)
|
|
return sts;
|
|
|
|
sts = applespi_enable_spi(applespi);
|
|
if (sts)
|
|
return sts;
|
|
|
|
/* setup the keyboard input dev */
|
|
applespi->keyboard_input_dev = devm_input_allocate_device(&spi->dev);
|
|
|
|
if (!applespi->keyboard_input_dev)
|
|
return -ENOMEM;
|
|
|
|
applespi->keyboard_input_dev->name = "Apple SPI Keyboard";
|
|
applespi->keyboard_input_dev->phys = "applespi/input0";
|
|
applespi->keyboard_input_dev->dev.parent = &spi->dev;
|
|
applespi->keyboard_input_dev->id.bustype = BUS_SPI;
|
|
|
|
applespi->keyboard_input_dev->evbit[0] =
|
|
BIT_MASK(EV_KEY) | BIT_MASK(EV_LED) | BIT_MASK(EV_REP);
|
|
applespi->keyboard_input_dev->ledbit[0] = BIT_MASK(LED_CAPSL);
|
|
|
|
input_set_drvdata(applespi->keyboard_input_dev, applespi);
|
|
applespi->keyboard_input_dev->event = applespi_event;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(applespi_scancodes); i++)
|
|
if (applespi_scancodes[i])
|
|
input_set_capability(applespi->keyboard_input_dev,
|
|
EV_KEY, applespi_scancodes[i]);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(applespi_controlcodes); i++)
|
|
if (applespi_controlcodes[i])
|
|
input_set_capability(applespi->keyboard_input_dev,
|
|
EV_KEY, applespi_controlcodes[i]);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(applespi_fn_codes); i++)
|
|
if (applespi_fn_codes[i].to)
|
|
input_set_capability(applespi->keyboard_input_dev,
|
|
EV_KEY, applespi_fn_codes[i].to);
|
|
|
|
input_set_capability(applespi->keyboard_input_dev, EV_KEY, KEY_FN);
|
|
|
|
sts = input_register_device(applespi->keyboard_input_dev);
|
|
if (sts) {
|
|
dev_err(&applespi->spi->dev,
|
|
"Unable to register keyboard input device (%d)\n", sts);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* The applespi device doesn't send interrupts normally (as is described
|
|
* in its DSDT), but rather seems to use ACPI GPEs.
|
|
*/
|
|
acpi_sts = acpi_evaluate_integer(spi_handle, "_GPE", NULL, &gpe);
|
|
if (ACPI_FAILURE(acpi_sts)) {
|
|
dev_err(&applespi->spi->dev,
|
|
"Failed to obtain GPE for SPI slave device: %s\n",
|
|
acpi_format_exception(acpi_sts));
|
|
return -ENODEV;
|
|
}
|
|
applespi->gpe = (int)gpe;
|
|
|
|
acpi_sts = acpi_install_gpe_handler(NULL, applespi->gpe,
|
|
ACPI_GPE_LEVEL_TRIGGERED,
|
|
applespi_notify, applespi);
|
|
if (ACPI_FAILURE(acpi_sts)) {
|
|
dev_err(&applespi->spi->dev,
|
|
"Failed to install GPE handler for GPE %d: %s\n",
|
|
applespi->gpe, acpi_format_exception(acpi_sts));
|
|
return -ENODEV;
|
|
}
|
|
|
|
applespi->suspended = false;
|
|
|
|
acpi_sts = acpi_enable_gpe(NULL, applespi->gpe);
|
|
if (ACPI_FAILURE(acpi_sts)) {
|
|
dev_err(&applespi->spi->dev,
|
|
"Failed to enable GPE handler for GPE %d: %s\n",
|
|
applespi->gpe, acpi_format_exception(acpi_sts));
|
|
acpi_remove_gpe_handler(NULL, applespi->gpe, applespi_notify);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* trigger touchpad setup */
|
|
applespi_init(applespi, false);
|
|
|
|
/*
|
|
* By default this device is not enabled for wakeup; but USB keyboards
|
|
* generally are, so the expectation is that by default the keyboard
|
|
* will wake the system.
|
|
*/
|
|
device_wakeup_enable(&spi->dev);
|
|
|
|
/* set up keyboard-backlight */
|
|
sts = applespi_get_saved_bl_level(applespi);
|
|
if (sts >= 0)
|
|
applespi_set_bl_level(&applespi->backlight_info, sts);
|
|
|
|
applespi->backlight_info.name = "spi::kbd_backlight";
|
|
applespi->backlight_info.default_trigger = "kbd-backlight";
|
|
applespi->backlight_info.brightness_set = applespi_set_bl_level;
|
|
|
|
sts = devm_led_classdev_register(&spi->dev, &applespi->backlight_info);
|
|
if (sts)
|
|
dev_warn(&applespi->spi->dev,
|
|
"Unable to register keyboard backlight class dev (%d)\n",
|
|
sts);
|
|
|
|
/* set up debugfs entries for touchpad dimensions logging */
|
|
applespi->debugfs_root = debugfs_create_dir("applespi", NULL);
|
|
|
|
debugfs_create_bool("enable_tp_dim", 0600, applespi->debugfs_root,
|
|
&applespi->debug_tp_dim);
|
|
|
|
debugfs_create_file("tp_dim", 0400, applespi->debugfs_root, applespi,
|
|
&applespi_tp_dim_fops);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void applespi_drain_writes(struct applespi_data *applespi)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&applespi->cmd_msg_lock, flags);
|
|
|
|
applespi->drain = true;
|
|
wait_event_lock_irq(applespi->drain_complete, !applespi->write_active,
|
|
applespi->cmd_msg_lock);
|
|
|
|
spin_unlock_irqrestore(&applespi->cmd_msg_lock, flags);
|
|
}
|
|
|
|
static void applespi_drain_reads(struct applespi_data *applespi)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&applespi->cmd_msg_lock, flags);
|
|
|
|
wait_event_lock_irq(applespi->drain_complete, !applespi->read_active,
|
|
applespi->cmd_msg_lock);
|
|
|
|
applespi->suspended = true;
|
|
|
|
spin_unlock_irqrestore(&applespi->cmd_msg_lock, flags);
|
|
}
|
|
|
|
static int applespi_remove(struct spi_device *spi)
|
|
{
|
|
struct applespi_data *applespi = spi_get_drvdata(spi);
|
|
|
|
applespi_drain_writes(applespi);
|
|
|
|
acpi_disable_gpe(NULL, applespi->gpe);
|
|
acpi_remove_gpe_handler(NULL, applespi->gpe, applespi_notify);
|
|
device_wakeup_disable(&spi->dev);
|
|
|
|
applespi_drain_reads(applespi);
|
|
|
|
debugfs_remove_recursive(applespi->debugfs_root);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void applespi_shutdown(struct spi_device *spi)
|
|
{
|
|
struct applespi_data *applespi = spi_get_drvdata(spi);
|
|
|
|
applespi_save_bl_level(applespi, applespi->have_bl_level);
|
|
}
|
|
|
|
static int applespi_poweroff_late(struct device *dev)
|
|
{
|
|
struct spi_device *spi = to_spi_device(dev);
|
|
struct applespi_data *applespi = spi_get_drvdata(spi);
|
|
|
|
applespi_save_bl_level(applespi, applespi->have_bl_level);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused applespi_suspend(struct device *dev)
|
|
{
|
|
struct spi_device *spi = to_spi_device(dev);
|
|
struct applespi_data *applespi = spi_get_drvdata(spi);
|
|
acpi_status acpi_sts;
|
|
int sts;
|
|
|
|
/* turn off caps-lock - it'll stay on otherwise */
|
|
sts = applespi_set_capsl_led(applespi, false);
|
|
if (sts)
|
|
dev_warn(&applespi->spi->dev,
|
|
"Failed to turn off caps-lock led (%d)\n", sts);
|
|
|
|
applespi_drain_writes(applespi);
|
|
|
|
/* disable the interrupt */
|
|
acpi_sts = acpi_disable_gpe(NULL, applespi->gpe);
|
|
if (ACPI_FAILURE(acpi_sts))
|
|
dev_err(&applespi->spi->dev,
|
|
"Failed to disable GPE handler for GPE %d: %s\n",
|
|
applespi->gpe, acpi_format_exception(acpi_sts));
|
|
|
|
applespi_drain_reads(applespi);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused applespi_resume(struct device *dev)
|
|
{
|
|
struct spi_device *spi = to_spi_device(dev);
|
|
struct applespi_data *applespi = spi_get_drvdata(spi);
|
|
acpi_status acpi_sts;
|
|
unsigned long flags;
|
|
|
|
/* ensure our flags and state reflect a newly resumed device */
|
|
spin_lock_irqsave(&applespi->cmd_msg_lock, flags);
|
|
|
|
applespi->drain = false;
|
|
applespi->have_cl_led_on = false;
|
|
applespi->have_bl_level = 0;
|
|
applespi->cmd_msg_queued = false;
|
|
applespi->read_active = false;
|
|
applespi->write_active = false;
|
|
|
|
applespi->suspended = false;
|
|
|
|
spin_unlock_irqrestore(&applespi->cmd_msg_lock, flags);
|
|
|
|
/* switch on the SPI interface */
|
|
applespi_enable_spi(applespi);
|
|
|
|
/* re-enable the interrupt */
|
|
acpi_sts = acpi_enable_gpe(NULL, applespi->gpe);
|
|
if (ACPI_FAILURE(acpi_sts))
|
|
dev_err(&applespi->spi->dev,
|
|
"Failed to re-enable GPE handler for GPE %d: %s\n",
|
|
applespi->gpe, acpi_format_exception(acpi_sts));
|
|
|
|
/* switch the touchpad into multitouch mode */
|
|
applespi_init(applespi, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct acpi_device_id applespi_acpi_match[] = {
|
|
{ "APP000D", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, applespi_acpi_match);
|
|
|
|
static const struct dev_pm_ops applespi_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(applespi_suspend, applespi_resume)
|
|
.poweroff_late = applespi_poweroff_late,
|
|
};
|
|
|
|
static struct spi_driver applespi_driver = {
|
|
.driver = {
|
|
.name = "applespi",
|
|
.acpi_match_table = applespi_acpi_match,
|
|
.pm = &applespi_pm_ops,
|
|
},
|
|
.probe = applespi_probe,
|
|
.remove = applespi_remove,
|
|
.shutdown = applespi_shutdown,
|
|
};
|
|
|
|
module_spi_driver(applespi_driver)
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("MacBook(Pro) SPI Keyboard/Touchpad driver");
|
|
MODULE_AUTHOR("Federico Lorenzi");
|
|
MODULE_AUTHOR("Ronald Tschalär");
|