106 lines
3.7 KiB
C
106 lines
3.7 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* Copyright (C) 2005, Intec Automation Inc.
|
|
* Copyright (C) 2014, Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
#ifndef __LINUX_MTD_SFDP_H
|
|
#define __LINUX_MTD_SFDP_H
|
|
|
|
/* SFDP revisions */
|
|
#define SFDP_JESD216_MAJOR 1
|
|
#define SFDP_JESD216_MINOR 0
|
|
#define SFDP_JESD216A_MINOR 5
|
|
#define SFDP_JESD216B_MINOR 6
|
|
|
|
/* Basic Flash Parameter Table */
|
|
|
|
/*
|
|
* JESD216 rev D defines a Basic Flash Parameter Table of 20 DWORDs.
|
|
* They are indexed from 1 but C arrays are indexed from 0.
|
|
*/
|
|
#define BFPT_DWORD(i) ((i) - 1)
|
|
#define BFPT_DWORD_MAX 20
|
|
|
|
struct sfdp_bfpt {
|
|
u32 dwords[BFPT_DWORD_MAX];
|
|
};
|
|
|
|
/* The first version of JESD216 defined only 9 DWORDs. */
|
|
#define BFPT_DWORD_MAX_JESD216 9
|
|
#define BFPT_DWORD_MAX_JESD216B 16
|
|
|
|
/* 1st DWORD. */
|
|
#define BFPT_DWORD1_FAST_READ_1_1_2 BIT(16)
|
|
#define BFPT_DWORD1_ADDRESS_BYTES_MASK GENMASK(18, 17)
|
|
#define BFPT_DWORD1_ADDRESS_BYTES_3_ONLY (0x0UL << 17)
|
|
#define BFPT_DWORD1_ADDRESS_BYTES_3_OR_4 (0x1UL << 17)
|
|
#define BFPT_DWORD1_ADDRESS_BYTES_4_ONLY (0x2UL << 17)
|
|
#define BFPT_DWORD1_DTR BIT(19)
|
|
#define BFPT_DWORD1_FAST_READ_1_2_2 BIT(20)
|
|
#define BFPT_DWORD1_FAST_READ_1_4_4 BIT(21)
|
|
#define BFPT_DWORD1_FAST_READ_1_1_4 BIT(22)
|
|
|
|
/* 5th DWORD. */
|
|
#define BFPT_DWORD5_FAST_READ_2_2_2 BIT(0)
|
|
#define BFPT_DWORD5_FAST_READ_4_4_4 BIT(4)
|
|
|
|
/* 11th DWORD. */
|
|
#define BFPT_DWORD11_PAGE_SIZE_SHIFT 4
|
|
#define BFPT_DWORD11_PAGE_SIZE_MASK GENMASK(7, 4)
|
|
|
|
/* 15th DWORD. */
|
|
|
|
/*
|
|
* (from JESD216 rev B)
|
|
* Quad Enable Requirements (QER):
|
|
* - 000b: Device does not have a QE bit. Device detects 1-1-4 and 1-4-4
|
|
* reads based on instruction. DQ3/HOLD# functions are hold during
|
|
* instruction phase.
|
|
* - 001b: QE is bit 1 of status register 2. It is set via Write Status with
|
|
* two data bytes where bit 1 of the second byte is one.
|
|
* [...]
|
|
* Writing only one byte to the status register has the side-effect of
|
|
* clearing status register 2, including the QE bit. The 100b code is
|
|
* used if writing one byte to the status register does not modify
|
|
* status register 2.
|
|
* - 010b: QE is bit 6 of status register 1. It is set via Write Status with
|
|
* one data byte where bit 6 is one.
|
|
* [...]
|
|
* - 011b: QE is bit 7 of status register 2. It is set via Write status
|
|
* register 2 instruction 3Eh with one data byte where bit 7 is one.
|
|
* [...]
|
|
* The status register 2 is read using instruction 3Fh.
|
|
* - 100b: QE is bit 1 of status register 2. It is set via Write Status with
|
|
* two data bytes where bit 1 of the second byte is one.
|
|
* [...]
|
|
* In contrast to the 001b code, writing one byte to the status
|
|
* register does not modify status register 2.
|
|
* - 101b: QE is bit 1 of status register 2. Status register 1 is read using
|
|
* Read Status instruction 05h. Status register2 is read using
|
|
* instruction 35h. QE is set via Write Status instruction 01h with
|
|
* two data bytes where bit 1 of the second byte is one.
|
|
* [...]
|
|
*/
|
|
#define BFPT_DWORD15_QER_MASK GENMASK(22, 20)
|
|
#define BFPT_DWORD15_QER_NONE (0x0UL << 20) /* Micron */
|
|
#define BFPT_DWORD15_QER_SR2_BIT1_BUGGY (0x1UL << 20)
|
|
#define BFPT_DWORD15_QER_SR1_BIT6 (0x2UL << 20) /* Macronix */
|
|
#define BFPT_DWORD15_QER_SR2_BIT7 (0x3UL << 20)
|
|
#define BFPT_DWORD15_QER_SR2_BIT1_NO_RD (0x4UL << 20)
|
|
#define BFPT_DWORD15_QER_SR2_BIT1 (0x5UL << 20) /* Spansion */
|
|
|
|
struct sfdp_parameter_header {
|
|
u8 id_lsb;
|
|
u8 minor;
|
|
u8 major;
|
|
u8 length; /* in double words */
|
|
u8 parameter_table_pointer[3]; /* byte address */
|
|
u8 id_msb;
|
|
};
|
|
|
|
int spi_nor_parse_sfdp(struct spi_nor *nor,
|
|
struct spi_nor_flash_parameter *params);
|
|
|
|
#endif /* __LINUX_MTD_SFDP_H */
|