1186 lines
33 KiB
C
1186 lines
33 KiB
C
/*
|
||
* Driver for sunxi SD/MMC host controllers
|
||
* (C) Copyright 2007-2011 Reuuimlla Technology Co., Ltd.
|
||
* (C) Copyright 2007-2011 Aaron Maoye <leafy.myeh@reuuimllatech.com>
|
||
* (C) Copyright 2013-2014 O2S GmbH <www.o2s.ch>
|
||
* (C) Copyright 2013-2014 David Lanzend<6E>rfer <david.lanzendoerfer@o2s.ch>
|
||
* (C) Copyright 2013-2014 Hans de Goede <hdegoede@redhat.com>
|
||
*
|
||
* This program is free software; you can redistribute it and/or
|
||
* modify it under the terms of the GNU General Public License as
|
||
* published by the Free Software Foundation; either version 2 of
|
||
* the License, or (at your option) any later version.
|
||
*/
|
||
|
||
#include <linux/kernel.h>
|
||
#include <linux/module.h>
|
||
#include <linux/io.h>
|
||
#include <linux/device.h>
|
||
#include <linux/interrupt.h>
|
||
#include <linux/delay.h>
|
||
#include <linux/err.h>
|
||
|
||
#include <linux/clk.h>
|
||
#include <linux/gpio.h>
|
||
#include <linux/platform_device.h>
|
||
#include <linux/spinlock.h>
|
||
#include <linux/scatterlist.h>
|
||
#include <linux/dma-mapping.h>
|
||
#include <linux/slab.h>
|
||
#include <linux/reset.h>
|
||
#include <linux/regulator/consumer.h>
|
||
|
||
#include <linux/of_address.h>
|
||
#include <linux/of_gpio.h>
|
||
#include <linux/of_platform.h>
|
||
|
||
#include <linux/mmc/host.h>
|
||
#include <linux/mmc/sd.h>
|
||
#include <linux/mmc/sdio.h>
|
||
#include <linux/mmc/mmc.h>
|
||
#include <linux/mmc/core.h>
|
||
#include <linux/mmc/card.h>
|
||
#include <linux/mmc/slot-gpio.h>
|
||
|
||
/* register offset definitions */
|
||
#define SDXC_REG_GCTRL (0x00) /* SMC Global Control Register */
|
||
#define SDXC_REG_CLKCR (0x04) /* SMC Clock Control Register */
|
||
#define SDXC_REG_TMOUT (0x08) /* SMC Time Out Register */
|
||
#define SDXC_REG_WIDTH (0x0C) /* SMC Bus Width Register */
|
||
#define SDXC_REG_BLKSZ (0x10) /* SMC Block Size Register */
|
||
#define SDXC_REG_BCNTR (0x14) /* SMC Byte Count Register */
|
||
#define SDXC_REG_CMDR (0x18) /* SMC Command Register */
|
||
#define SDXC_REG_CARG (0x1C) /* SMC Argument Register */
|
||
#define SDXC_REG_RESP0 (0x20) /* SMC Response Register 0 */
|
||
#define SDXC_REG_RESP1 (0x24) /* SMC Response Register 1 */
|
||
#define SDXC_REG_RESP2 (0x28) /* SMC Response Register 2 */
|
||
#define SDXC_REG_RESP3 (0x2C) /* SMC Response Register 3 */
|
||
#define SDXC_REG_IMASK (0x30) /* SMC Interrupt Mask Register */
|
||
#define SDXC_REG_MISTA (0x34) /* SMC Masked Interrupt Status Register */
|
||
#define SDXC_REG_RINTR (0x38) /* SMC Raw Interrupt Status Register */
|
||
#define SDXC_REG_STAS (0x3C) /* SMC Status Register */
|
||
#define SDXC_REG_FTRGL (0x40) /* SMC FIFO Threshold Watermark Registe */
|
||
#define SDXC_REG_FUNS (0x44) /* SMC Function Select Register */
|
||
#define SDXC_REG_CBCR (0x48) /* SMC CIU Byte Count Register */
|
||
#define SDXC_REG_BBCR (0x4C) /* SMC BIU Byte Count Register */
|
||
#define SDXC_REG_DBGC (0x50) /* SMC Debug Enable Register */
|
||
#define SDXC_REG_HWRST (0x78) /* SMC Card Hardware Reset for Register */
|
||
#define SDXC_REG_DMAC (0x80) /* SMC IDMAC Control Register */
|
||
#define SDXC_REG_DLBA (0x84) /* SMC IDMAC Descriptor List Base Addre */
|
||
#define SDXC_REG_IDST (0x88) /* SMC IDMAC Status Register */
|
||
#define SDXC_REG_IDIE (0x8C) /* SMC IDMAC Interrupt Enable Register */
|
||
#define SDXC_REG_CHDA (0x90)
|
||
#define SDXC_REG_CBDA (0x94)
|
||
|
||
#define mmc_readl(host, reg) \
|
||
readl((host)->reg_base + SDXC_##reg)
|
||
#define mmc_writel(host, reg, value) \
|
||
writel((value), (host)->reg_base + SDXC_##reg)
|
||
|
||
/* global control register bits */
|
||
#define SDXC_SOFT_RESET BIT(0)
|
||
#define SDXC_FIFO_RESET BIT(1)
|
||
#define SDXC_DMA_RESET BIT(2)
|
||
#define SDXC_INTERRUPT_ENABLE_BIT BIT(4)
|
||
#define SDXC_DMA_ENABLE_BIT BIT(5)
|
||
#define SDXC_DEBOUNCE_ENABLE_BIT BIT(8)
|
||
#define SDXC_POSEDGE_LATCH_DATA BIT(9)
|
||
#define SDXC_DDR_MODE BIT(10)
|
||
#define SDXC_MEMORY_ACCESS_DONE BIT(29)
|
||
#define SDXC_ACCESS_DONE_DIRECT BIT(30)
|
||
#define SDXC_ACCESS_BY_AHB BIT(31)
|
||
#define SDXC_ACCESS_BY_DMA (0 << 31)
|
||
#define SDXC_HARDWARE_RESET \
|
||
(SDXC_SOFT_RESET | SDXC_FIFO_RESET | SDXC_DMA_RESET)
|
||
|
||
/* clock control bits */
|
||
#define SDXC_CARD_CLOCK_ON BIT(16)
|
||
#define SDXC_LOW_POWER_ON BIT(17)
|
||
|
||
/* bus width */
|
||
#define SDXC_WIDTH1 0
|
||
#define SDXC_WIDTH4 1
|
||
#define SDXC_WIDTH8 2
|
||
|
||
/* smc command bits */
|
||
#define SDXC_RESP_EXPIRE BIT(6)
|
||
#define SDXC_LONG_RESPONSE BIT(7)
|
||
#define SDXC_CHECK_RESPONSE_CRC BIT(8)
|
||
#define SDXC_DATA_EXPIRE BIT(9)
|
||
#define SDXC_WRITE BIT(10)
|
||
#define SDXC_SEQUENCE_MODE BIT(11)
|
||
#define SDXC_SEND_AUTO_STOP BIT(12)
|
||
#define SDXC_WAIT_PRE_OVER BIT(13)
|
||
#define SDXC_STOP_ABORT_CMD BIT(14)
|
||
#define SDXC_SEND_INIT_SEQUENCE BIT(15)
|
||
#define SDXC_UPCLK_ONLY BIT(21)
|
||
#define SDXC_READ_CEATA_DEV BIT(22)
|
||
#define SDXC_CCS_EXPIRE BIT(23)
|
||
#define SDXC_ENABLE_BIT_BOOT BIT(24)
|
||
#define SDXC_ALT_BOOT_OPTIONS BIT(25)
|
||
#define SDXC_BOOT_ACK_EXPIRE BIT(26)
|
||
#define SDXC_BOOT_ABORT BIT(27)
|
||
#define SDXC_VOLTAGE_SWITCH BIT(28)
|
||
#define SDXC_USE_HOLD_REGISTER BIT(29)
|
||
#define SDXC_START BIT(31)
|
||
|
||
/* interrupt bits */
|
||
#define SDXC_RESP_ERROR BIT(1)
|
||
#define SDXC_COMMAND_DONE BIT(2)
|
||
#define SDXC_DATA_OVER BIT(3)
|
||
#define SDXC_TX_DATA_REQUEST BIT(4)
|
||
#define SDXC_RX_DATA_REQUEST BIT(5)
|
||
#define SDXC_RESP_CRC_ERROR BIT(6)
|
||
#define SDXC_DATA_CRC_ERROR BIT(7)
|
||
#define SDXC_RESP_TIMEOUT BIT(8)
|
||
#define SDXC_DATA_TIMEOUT BIT(9)
|
||
#define SDXC_VOLTAGE_CHANGE_DONE BIT(10)
|
||
#define SDXC_FIFO_RUN_ERROR BIT(11)
|
||
#define SDXC_HARD_WARE_LOCKED BIT(12)
|
||
#define SDXC_START_BIT_ERROR BIT(13)
|
||
#define SDXC_AUTO_COMMAND_DONE BIT(14)
|
||
#define SDXC_END_BIT_ERROR BIT(15)
|
||
#define SDXC_SDIO_INTERRUPT BIT(16)
|
||
#define SDXC_CARD_INSERT BIT(30)
|
||
#define SDXC_CARD_REMOVE BIT(31)
|
||
#define SDXC_INTERRUPT_ERROR_BIT \
|
||
(SDXC_RESP_ERROR | SDXC_RESP_CRC_ERROR | SDXC_DATA_CRC_ERROR | \
|
||
SDXC_RESP_TIMEOUT | SDXC_DATA_TIMEOUT | SDXC_FIFO_RUN_ERROR | \
|
||
SDXC_HARD_WARE_LOCKED | SDXC_START_BIT_ERROR | SDXC_END_BIT_ERROR)
|
||
#define SDXC_INTERRUPT_DONE_BIT \
|
||
(SDXC_AUTO_COMMAND_DONE | SDXC_DATA_OVER | \
|
||
SDXC_COMMAND_DONE | SDXC_VOLTAGE_CHANGE_DONE)
|
||
|
||
/* status */
|
||
#define SDXC_RXWL_FLAG BIT(0)
|
||
#define SDXC_TXWL_FLAG BIT(1)
|
||
#define SDXC_FIFO_EMPTY BIT(2)
|
||
#define SDXC_FIFO_FULL BIT(3)
|
||
#define SDXC_CARD_PRESENT BIT(8)
|
||
#define SDXC_CARD_DATA_BUSY BIT(9)
|
||
#define SDXC_DATA_FSM_BUSY BIT(10)
|
||
#define SDXC_DMA_REQUEST BIT(31)
|
||
#define SDXC_FIFO_SIZE 16
|
||
|
||
/* Function select */
|
||
#define SDXC_CEATA_ON (0xceaa << 16)
|
||
#define SDXC_SEND_IRQ_RESPONSE BIT(0)
|
||
#define SDXC_SDIO_READ_WAIT BIT(1)
|
||
#define SDXC_ABORT_READ_DATA BIT(2)
|
||
#define SDXC_SEND_CCSD BIT(8)
|
||
#define SDXC_SEND_AUTO_STOPCCSD BIT(9)
|
||
#define SDXC_CEATA_DEV_IRQ_ENABLE BIT(10)
|
||
|
||
/* IDMA controller bus mod bit field */
|
||
#define SDXC_IDMAC_SOFT_RESET BIT(0)
|
||
#define SDXC_IDMAC_FIX_BURST BIT(1)
|
||
#define SDXC_IDMAC_IDMA_ON BIT(7)
|
||
#define SDXC_IDMAC_REFETCH_DES BIT(31)
|
||
|
||
/* IDMA status bit field */
|
||
#define SDXC_IDMAC_TRANSMIT_INTERRUPT BIT(0)
|
||
#define SDXC_IDMAC_RECEIVE_INTERRUPT BIT(1)
|
||
#define SDXC_IDMAC_FATAL_BUS_ERROR BIT(2)
|
||
#define SDXC_IDMAC_DESTINATION_INVALID BIT(4)
|
||
#define SDXC_IDMAC_CARD_ERROR_SUM BIT(5)
|
||
#define SDXC_IDMAC_NORMAL_INTERRUPT_SUM BIT(8)
|
||
#define SDXC_IDMAC_ABNORMAL_INTERRUPT_SUM BIT(9)
|
||
#define SDXC_IDMAC_HOST_ABORT_INTERRUPT BIT(10)
|
||
#define SDXC_IDMAC_IDLE (0 << 13)
|
||
#define SDXC_IDMAC_SUSPEND (1 << 13)
|
||
#define SDXC_IDMAC_DESC_READ (2 << 13)
|
||
#define SDXC_IDMAC_DESC_CHECK (3 << 13)
|
||
#define SDXC_IDMAC_READ_REQUEST_WAIT (4 << 13)
|
||
#define SDXC_IDMAC_WRITE_REQUEST_WAIT (5 << 13)
|
||
#define SDXC_IDMAC_READ (6 << 13)
|
||
#define SDXC_IDMAC_WRITE (7 << 13)
|
||
#define SDXC_IDMAC_DESC_CLOSE (8 << 13)
|
||
|
||
/*
|
||
* If the idma-des-size-bits of property is ie 13, bufsize bits are:
|
||
* Bits 0-12: buf1 size
|
||
* Bits 13-25: buf2 size
|
||
* Bits 26-31: not used
|
||
* Since we only ever set buf1 size, we can simply store it directly.
|
||
*/
|
||
#define SDXC_IDMAC_DES0_DIC BIT(1) /* disable interrupt on completion */
|
||
#define SDXC_IDMAC_DES0_LD BIT(2) /* last descriptor */
|
||
#define SDXC_IDMAC_DES0_FD BIT(3) /* first descriptor */
|
||
#define SDXC_IDMAC_DES0_CH BIT(4) /* chain mode */
|
||
#define SDXC_IDMAC_DES0_ER BIT(5) /* end of ring */
|
||
#define SDXC_IDMAC_DES0_CES BIT(30) /* card error summary */
|
||
#define SDXC_IDMAC_DES0_OWN BIT(31) /* 1-idma owns it, 0-host owns it */
|
||
|
||
#define SDXC_CLK_400K 0
|
||
#define SDXC_CLK_25M 1
|
||
#define SDXC_CLK_50M 2
|
||
#define SDXC_CLK_50M_DDR 3
|
||
#define SDXC_CLK_50M_DDR_8BIT 4
|
||
|
||
struct sunxi_mmc_clk_delay {
|
||
u32 output;
|
||
u32 sample;
|
||
};
|
||
|
||
struct sunxi_idma_des {
|
||
u32 config;
|
||
u32 buf_size;
|
||
u32 buf_addr_ptr1;
|
||
u32 buf_addr_ptr2;
|
||
};
|
||
|
||
struct sunxi_mmc_host {
|
||
struct mmc_host *mmc;
|
||
struct reset_control *reset;
|
||
|
||
/* IO mapping base */
|
||
void __iomem *reg_base;
|
||
|
||
/* clock management */
|
||
struct clk *clk_ahb;
|
||
struct clk *clk_mmc;
|
||
struct clk *clk_sample;
|
||
struct clk *clk_output;
|
||
const struct sunxi_mmc_clk_delay *clk_delays;
|
||
|
||
/* irq */
|
||
spinlock_t lock;
|
||
int irq;
|
||
u32 int_sum;
|
||
u32 sdio_imask;
|
||
|
||
/* dma */
|
||
u32 idma_des_size_bits;
|
||
dma_addr_t sg_dma;
|
||
void *sg_cpu;
|
||
bool wait_dma;
|
||
|
||
struct mmc_request *mrq;
|
||
struct mmc_request *manual_stop_mrq;
|
||
int ferror;
|
||
|
||
/* vqmmc */
|
||
bool vqmmc_enabled;
|
||
};
|
||
|
||
static int sunxi_mmc_reset_host(struct sunxi_mmc_host *host)
|
||
{
|
||
unsigned long expire = jiffies + msecs_to_jiffies(250);
|
||
u32 rval;
|
||
|
||
mmc_writel(host, REG_GCTRL, SDXC_HARDWARE_RESET);
|
||
do {
|
||
rval = mmc_readl(host, REG_GCTRL);
|
||
} while (time_before(jiffies, expire) && (rval & SDXC_HARDWARE_RESET));
|
||
|
||
if (rval & SDXC_HARDWARE_RESET) {
|
||
dev_err(mmc_dev(host->mmc), "fatal err reset timeout\n");
|
||
return -EIO;
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int sunxi_mmc_init_host(struct mmc_host *mmc)
|
||
{
|
||
u32 rval;
|
||
struct sunxi_mmc_host *host = mmc_priv(mmc);
|
||
|
||
if (sunxi_mmc_reset_host(host))
|
||
return -EIO;
|
||
|
||
/*
|
||
* Burst 8 transfers, RX trigger level: 7, TX trigger level: 8
|
||
*
|
||
* TODO: sun9i has a larger FIFO and supports higher trigger values
|
||
*/
|
||
mmc_writel(host, REG_FTRGL, 0x20070008);
|
||
/* Maximum timeout value */
|
||
mmc_writel(host, REG_TMOUT, 0xffffffff);
|
||
/* Unmask SDIO interrupt if needed */
|
||
mmc_writel(host, REG_IMASK, host->sdio_imask);
|
||
/* Clear all pending interrupts */
|
||
mmc_writel(host, REG_RINTR, 0xffffffff);
|
||
/* Debug register? undocumented */
|
||
mmc_writel(host, REG_DBGC, 0xdeb);
|
||
/* Enable CEATA support */
|
||
mmc_writel(host, REG_FUNS, SDXC_CEATA_ON);
|
||
/* Set DMA descriptor list base address */
|
||
mmc_writel(host, REG_DLBA, host->sg_dma);
|
||
|
||
rval = mmc_readl(host, REG_GCTRL);
|
||
rval |= SDXC_INTERRUPT_ENABLE_BIT;
|
||
/* Undocumented, but found in Allwinner code */
|
||
rval &= ~SDXC_ACCESS_DONE_DIRECT;
|
||
mmc_writel(host, REG_GCTRL, rval);
|
||
|
||
return 0;
|
||
}
|
||
|
||
static void sunxi_mmc_init_idma_des(struct sunxi_mmc_host *host,
|
||
struct mmc_data *data)
|
||
{
|
||
struct sunxi_idma_des *pdes = (struct sunxi_idma_des *)host->sg_cpu;
|
||
dma_addr_t next_desc = host->sg_dma;
|
||
int i, max_len = (1 << host->idma_des_size_bits);
|
||
|
||
for (i = 0; i < data->sg_len; i++) {
|
||
pdes[i].config = SDXC_IDMAC_DES0_CH | SDXC_IDMAC_DES0_OWN |
|
||
SDXC_IDMAC_DES0_DIC;
|
||
|
||
if (data->sg[i].length == max_len)
|
||
pdes[i].buf_size = 0; /* 0 == max_len */
|
||
else
|
||
pdes[i].buf_size = data->sg[i].length;
|
||
|
||
next_desc += sizeof(struct sunxi_idma_des);
|
||
pdes[i].buf_addr_ptr1 = sg_dma_address(&data->sg[i]);
|
||
pdes[i].buf_addr_ptr2 = (u32)next_desc;
|
||
}
|
||
|
||
pdes[0].config |= SDXC_IDMAC_DES0_FD;
|
||
pdes[i - 1].config |= SDXC_IDMAC_DES0_LD | SDXC_IDMAC_DES0_ER;
|
||
pdes[i - 1].config &= ~SDXC_IDMAC_DES0_DIC;
|
||
pdes[i - 1].buf_addr_ptr2 = 0;
|
||
|
||
/*
|
||
* Avoid the io-store starting the idmac hitting io-mem before the
|
||
* descriptors hit the main-mem.
|
||
*/
|
||
wmb();
|
||
}
|
||
|
||
static enum dma_data_direction sunxi_mmc_get_dma_dir(struct mmc_data *data)
|
||
{
|
||
if (data->flags & MMC_DATA_WRITE)
|
||
return DMA_TO_DEVICE;
|
||
else
|
||
return DMA_FROM_DEVICE;
|
||
}
|
||
|
||
static int sunxi_mmc_map_dma(struct sunxi_mmc_host *host,
|
||
struct mmc_data *data)
|
||
{
|
||
u32 i, dma_len;
|
||
struct scatterlist *sg;
|
||
|
||
dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
|
||
sunxi_mmc_get_dma_dir(data));
|
||
if (dma_len == 0) {
|
||
dev_err(mmc_dev(host->mmc), "dma_map_sg failed\n");
|
||
return -ENOMEM;
|
||
}
|
||
|
||
for_each_sg(data->sg, sg, data->sg_len, i) {
|
||
if (sg->offset & 3 || sg->length & 3) {
|
||
dev_err(mmc_dev(host->mmc),
|
||
"unaligned scatterlist: os %x length %d\n",
|
||
sg->offset, sg->length);
|
||
return -EINVAL;
|
||
}
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
static void sunxi_mmc_start_dma(struct sunxi_mmc_host *host,
|
||
struct mmc_data *data)
|
||
{
|
||
u32 rval;
|
||
|
||
sunxi_mmc_init_idma_des(host, data);
|
||
|
||
rval = mmc_readl(host, REG_GCTRL);
|
||
rval |= SDXC_DMA_ENABLE_BIT;
|
||
mmc_writel(host, REG_GCTRL, rval);
|
||
rval |= SDXC_DMA_RESET;
|
||
mmc_writel(host, REG_GCTRL, rval);
|
||
|
||
mmc_writel(host, REG_DMAC, SDXC_IDMAC_SOFT_RESET);
|
||
|
||
if (!(data->flags & MMC_DATA_WRITE))
|
||
mmc_writel(host, REG_IDIE, SDXC_IDMAC_RECEIVE_INTERRUPT);
|
||
|
||
mmc_writel(host, REG_DMAC,
|
||
SDXC_IDMAC_FIX_BURST | SDXC_IDMAC_IDMA_ON);
|
||
}
|
||
|
||
static void sunxi_mmc_send_manual_stop(struct sunxi_mmc_host *host,
|
||
struct mmc_request *req)
|
||
{
|
||
u32 arg, cmd_val, ri;
|
||
unsigned long expire = jiffies + msecs_to_jiffies(1000);
|
||
|
||
cmd_val = SDXC_START | SDXC_RESP_EXPIRE |
|
||
SDXC_STOP_ABORT_CMD | SDXC_CHECK_RESPONSE_CRC;
|
||
|
||
if (req->cmd->opcode == SD_IO_RW_EXTENDED) {
|
||
cmd_val |= SD_IO_RW_DIRECT;
|
||
arg = (1 << 31) | (0 << 28) | (SDIO_CCCR_ABORT << 9) |
|
||
((req->cmd->arg >> 28) & 0x7);
|
||
} else {
|
||
cmd_val |= MMC_STOP_TRANSMISSION;
|
||
arg = 0;
|
||
}
|
||
|
||
mmc_writel(host, REG_CARG, arg);
|
||
mmc_writel(host, REG_CMDR, cmd_val);
|
||
|
||
do {
|
||
ri = mmc_readl(host, REG_RINTR);
|
||
} while (!(ri & (SDXC_COMMAND_DONE | SDXC_INTERRUPT_ERROR_BIT)) &&
|
||
time_before(jiffies, expire));
|
||
|
||
if (!(ri & SDXC_COMMAND_DONE) || (ri & SDXC_INTERRUPT_ERROR_BIT)) {
|
||
dev_err(mmc_dev(host->mmc), "send stop command failed\n");
|
||
if (req->stop)
|
||
req->stop->resp[0] = -ETIMEDOUT;
|
||
} else {
|
||
if (req->stop)
|
||
req->stop->resp[0] = mmc_readl(host, REG_RESP0);
|
||
}
|
||
|
||
mmc_writel(host, REG_RINTR, 0xffff);
|
||
}
|
||
|
||
static void sunxi_mmc_dump_errinfo(struct sunxi_mmc_host *host)
|
||
{
|
||
struct mmc_command *cmd = host->mrq->cmd;
|
||
struct mmc_data *data = host->mrq->data;
|
||
|
||
/* For some cmds timeout is normal with sd/mmc cards */
|
||
if ((host->int_sum & SDXC_INTERRUPT_ERROR_BIT) ==
|
||
SDXC_RESP_TIMEOUT && (cmd->opcode == SD_IO_SEND_OP_COND ||
|
||
cmd->opcode == SD_IO_RW_DIRECT))
|
||
return;
|
||
|
||
dev_err(mmc_dev(host->mmc),
|
||
"smc %d err, cmd %d,%s%s%s%s%s%s%s%s%s%s !!\n",
|
||
host->mmc->index, cmd->opcode,
|
||
data ? (data->flags & MMC_DATA_WRITE ? " WR" : " RD") : "",
|
||
host->int_sum & SDXC_RESP_ERROR ? " RE" : "",
|
||
host->int_sum & SDXC_RESP_CRC_ERROR ? " RCE" : "",
|
||
host->int_sum & SDXC_DATA_CRC_ERROR ? " DCE" : "",
|
||
host->int_sum & SDXC_RESP_TIMEOUT ? " RTO" : "",
|
||
host->int_sum & SDXC_DATA_TIMEOUT ? " DTO" : "",
|
||
host->int_sum & SDXC_FIFO_RUN_ERROR ? " FE" : "",
|
||
host->int_sum & SDXC_HARD_WARE_LOCKED ? " HL" : "",
|
||
host->int_sum & SDXC_START_BIT_ERROR ? " SBE" : "",
|
||
host->int_sum & SDXC_END_BIT_ERROR ? " EBE" : ""
|
||
);
|
||
}
|
||
|
||
/* Called in interrupt context! */
|
||
static irqreturn_t sunxi_mmc_finalize_request(struct sunxi_mmc_host *host)
|
||
{
|
||
struct mmc_request *mrq = host->mrq;
|
||
struct mmc_data *data = mrq->data;
|
||
u32 rval;
|
||
|
||
mmc_writel(host, REG_IMASK, host->sdio_imask);
|
||
mmc_writel(host, REG_IDIE, 0);
|
||
|
||
if (host->int_sum & SDXC_INTERRUPT_ERROR_BIT) {
|
||
sunxi_mmc_dump_errinfo(host);
|
||
mrq->cmd->error = -ETIMEDOUT;
|
||
|
||
if (data) {
|
||
data->error = -ETIMEDOUT;
|
||
host->manual_stop_mrq = mrq;
|
||
}
|
||
|
||
if (mrq->stop)
|
||
mrq->stop->error = -ETIMEDOUT;
|
||
} else {
|
||
if (mrq->cmd->flags & MMC_RSP_136) {
|
||
mrq->cmd->resp[0] = mmc_readl(host, REG_RESP3);
|
||
mrq->cmd->resp[1] = mmc_readl(host, REG_RESP2);
|
||
mrq->cmd->resp[2] = mmc_readl(host, REG_RESP1);
|
||
mrq->cmd->resp[3] = mmc_readl(host, REG_RESP0);
|
||
} else {
|
||
mrq->cmd->resp[0] = mmc_readl(host, REG_RESP0);
|
||
}
|
||
|
||
if (data)
|
||
data->bytes_xfered = data->blocks * data->blksz;
|
||
}
|
||
|
||
if (data) {
|
||
mmc_writel(host, REG_IDST, 0x337);
|
||
mmc_writel(host, REG_DMAC, 0);
|
||
rval = mmc_readl(host, REG_GCTRL);
|
||
rval |= SDXC_DMA_RESET;
|
||
mmc_writel(host, REG_GCTRL, rval);
|
||
rval &= ~SDXC_DMA_ENABLE_BIT;
|
||
mmc_writel(host, REG_GCTRL, rval);
|
||
rval |= SDXC_FIFO_RESET;
|
||
mmc_writel(host, REG_GCTRL, rval);
|
||
dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
|
||
sunxi_mmc_get_dma_dir(data));
|
||
}
|
||
|
||
mmc_writel(host, REG_RINTR, 0xffff);
|
||
|
||
host->mrq = NULL;
|
||
host->int_sum = 0;
|
||
host->wait_dma = false;
|
||
|
||
return host->manual_stop_mrq ? IRQ_WAKE_THREAD : IRQ_HANDLED;
|
||
}
|
||
|
||
static irqreturn_t sunxi_mmc_irq(int irq, void *dev_id)
|
||
{
|
||
struct sunxi_mmc_host *host = dev_id;
|
||
struct mmc_request *mrq;
|
||
u32 msk_int, idma_int;
|
||
bool finalize = false;
|
||
bool sdio_int = false;
|
||
irqreturn_t ret = IRQ_HANDLED;
|
||
|
||
spin_lock(&host->lock);
|
||
|
||
idma_int = mmc_readl(host, REG_IDST);
|
||
msk_int = mmc_readl(host, REG_MISTA);
|
||
|
||
dev_dbg(mmc_dev(host->mmc), "irq: rq %p mi %08x idi %08x\n",
|
||
host->mrq, msk_int, idma_int);
|
||
|
||
mrq = host->mrq;
|
||
if (mrq) {
|
||
if (idma_int & SDXC_IDMAC_RECEIVE_INTERRUPT)
|
||
host->wait_dma = false;
|
||
|
||
host->int_sum |= msk_int;
|
||
|
||
/* Wait for COMMAND_DONE on RESPONSE_TIMEOUT before finalize */
|
||
if ((host->int_sum & SDXC_RESP_TIMEOUT) &&
|
||
!(host->int_sum & SDXC_COMMAND_DONE))
|
||
mmc_writel(host, REG_IMASK,
|
||
host->sdio_imask | SDXC_COMMAND_DONE);
|
||
/* Don't wait for dma on error */
|
||
else if (host->int_sum & SDXC_INTERRUPT_ERROR_BIT)
|
||
finalize = true;
|
||
else if ((host->int_sum & SDXC_INTERRUPT_DONE_BIT) &&
|
||
!host->wait_dma)
|
||
finalize = true;
|
||
}
|
||
|
||
if (msk_int & SDXC_SDIO_INTERRUPT)
|
||
sdio_int = true;
|
||
|
||
mmc_writel(host, REG_RINTR, msk_int);
|
||
mmc_writel(host, REG_IDST, idma_int);
|
||
|
||
if (finalize)
|
||
ret = sunxi_mmc_finalize_request(host);
|
||
|
||
spin_unlock(&host->lock);
|
||
|
||
if (finalize && ret == IRQ_HANDLED)
|
||
mmc_request_done(host->mmc, mrq);
|
||
|
||
if (sdio_int)
|
||
mmc_signal_sdio_irq(host->mmc);
|
||
|
||
return ret;
|
||
}
|
||
|
||
static irqreturn_t sunxi_mmc_handle_manual_stop(int irq, void *dev_id)
|
||
{
|
||
struct sunxi_mmc_host *host = dev_id;
|
||
struct mmc_request *mrq;
|
||
unsigned long iflags;
|
||
|
||
spin_lock_irqsave(&host->lock, iflags);
|
||
mrq = host->manual_stop_mrq;
|
||
spin_unlock_irqrestore(&host->lock, iflags);
|
||
|
||
if (!mrq) {
|
||
dev_err(mmc_dev(host->mmc), "no request for manual stop\n");
|
||
return IRQ_HANDLED;
|
||
}
|
||
|
||
dev_err(mmc_dev(host->mmc), "data error, sending stop command\n");
|
||
|
||
/*
|
||
* We will never have more than one outstanding request,
|
||
* and we do not complete the request until after
|
||
* we've cleared host->manual_stop_mrq so we do not need to
|
||
* spin lock this function.
|
||
* Additionally we have wait states within this function
|
||
* so having it in a lock is a very bad idea.
|
||
*/
|
||
sunxi_mmc_send_manual_stop(host, mrq);
|
||
|
||
spin_lock_irqsave(&host->lock, iflags);
|
||
host->manual_stop_mrq = NULL;
|
||
spin_unlock_irqrestore(&host->lock, iflags);
|
||
|
||
mmc_request_done(host->mmc, mrq);
|
||
|
||
return IRQ_HANDLED;
|
||
}
|
||
|
||
static int sunxi_mmc_oclk_onoff(struct sunxi_mmc_host *host, u32 oclk_en)
|
||
{
|
||
unsigned long expire = jiffies + msecs_to_jiffies(750);
|
||
u32 rval;
|
||
|
||
rval = mmc_readl(host, REG_CLKCR);
|
||
rval &= ~(SDXC_CARD_CLOCK_ON | SDXC_LOW_POWER_ON);
|
||
|
||
if (oclk_en)
|
||
rval |= SDXC_CARD_CLOCK_ON;
|
||
|
||
mmc_writel(host, REG_CLKCR, rval);
|
||
|
||
rval = SDXC_START | SDXC_UPCLK_ONLY | SDXC_WAIT_PRE_OVER;
|
||
mmc_writel(host, REG_CMDR, rval);
|
||
|
||
do {
|
||
rval = mmc_readl(host, REG_CMDR);
|
||
} while (time_before(jiffies, expire) && (rval & SDXC_START));
|
||
|
||
/* clear irq status bits set by the command */
|
||
mmc_writel(host, REG_RINTR,
|
||
mmc_readl(host, REG_RINTR) & ~SDXC_SDIO_INTERRUPT);
|
||
|
||
if (rval & SDXC_START) {
|
||
dev_err(mmc_dev(host->mmc), "fatal err update clk timeout\n");
|
||
return -EIO;
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *host,
|
||
struct mmc_ios *ios)
|
||
{
|
||
u32 rate, oclk_dly, rval, sclk_dly;
|
||
u32 clock = ios->clock;
|
||
int ret;
|
||
|
||
/* 8 bit DDR requires a higher module clock */
|
||
if (ios->timing == MMC_TIMING_MMC_DDR52 &&
|
||
ios->bus_width == MMC_BUS_WIDTH_8)
|
||
clock <<= 1;
|
||
|
||
rate = clk_round_rate(host->clk_mmc, clock);
|
||
dev_dbg(mmc_dev(host->mmc), "setting clk to %d, rounded %d\n",
|
||
clock, rate);
|
||
|
||
/* setting clock rate */
|
||
ret = clk_set_rate(host->clk_mmc, rate);
|
||
if (ret) {
|
||
dev_err(mmc_dev(host->mmc), "error setting clk to %d: %d\n",
|
||
rate, ret);
|
||
return ret;
|
||
}
|
||
|
||
ret = sunxi_mmc_oclk_onoff(host, 0);
|
||
if (ret)
|
||
return ret;
|
||
|
||
/* clear internal divider */
|
||
rval = mmc_readl(host, REG_CLKCR);
|
||
rval &= ~0xff;
|
||
/* set internal divider for 8 bit eMMC DDR, so card clock is right */
|
||
if (ios->timing == MMC_TIMING_MMC_DDR52 &&
|
||
ios->bus_width == MMC_BUS_WIDTH_8) {
|
||
rval |= 1;
|
||
rate >>= 1;
|
||
}
|
||
mmc_writel(host, REG_CLKCR, rval);
|
||
|
||
/* determine delays */
|
||
if (rate <= 400000) {
|
||
oclk_dly = host->clk_delays[SDXC_CLK_400K].output;
|
||
sclk_dly = host->clk_delays[SDXC_CLK_400K].sample;
|
||
} else if (rate <= 25000000) {
|
||
oclk_dly = host->clk_delays[SDXC_CLK_25M].output;
|
||
sclk_dly = host->clk_delays[SDXC_CLK_25M].sample;
|
||
} else if (rate <= 52000000) {
|
||
if (ios->timing != MMC_TIMING_UHS_DDR50 &&
|
||
ios->timing != MMC_TIMING_MMC_DDR52) {
|
||
oclk_dly = host->clk_delays[SDXC_CLK_50M].output;
|
||
sclk_dly = host->clk_delays[SDXC_CLK_50M].sample;
|
||
} else if (ios->bus_width == MMC_BUS_WIDTH_8) {
|
||
oclk_dly = host->clk_delays[SDXC_CLK_50M_DDR_8BIT].output;
|
||
sclk_dly = host->clk_delays[SDXC_CLK_50M_DDR_8BIT].sample;
|
||
} else {
|
||
oclk_dly = host->clk_delays[SDXC_CLK_50M_DDR].output;
|
||
sclk_dly = host->clk_delays[SDXC_CLK_50M_DDR].sample;
|
||
}
|
||
} else {
|
||
return -EINVAL;
|
||
}
|
||
|
||
clk_set_phase(host->clk_sample, sclk_dly);
|
||
clk_set_phase(host->clk_output, oclk_dly);
|
||
|
||
return sunxi_mmc_oclk_onoff(host, 1);
|
||
}
|
||
|
||
static void sunxi_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
||
{
|
||
struct sunxi_mmc_host *host = mmc_priv(mmc);
|
||
u32 rval;
|
||
|
||
/* Set the power state */
|
||
switch (ios->power_mode) {
|
||
case MMC_POWER_ON:
|
||
break;
|
||
|
||
case MMC_POWER_UP:
|
||
host->ferror = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc,
|
||
ios->vdd);
|
||
if (host->ferror)
|
||
return;
|
||
|
||
if (!IS_ERR(mmc->supply.vqmmc)) {
|
||
host->ferror = regulator_enable(mmc->supply.vqmmc);
|
||
if (host->ferror) {
|
||
dev_err(mmc_dev(mmc),
|
||
"failed to enable vqmmc\n");
|
||
return;
|
||
}
|
||
host->vqmmc_enabled = true;
|
||
}
|
||
|
||
host->ferror = sunxi_mmc_init_host(mmc);
|
||
if (host->ferror)
|
||
return;
|
||
|
||
dev_dbg(mmc_dev(mmc), "power on!\n");
|
||
break;
|
||
|
||
case MMC_POWER_OFF:
|
||
dev_dbg(mmc_dev(mmc), "power off!\n");
|
||
sunxi_mmc_reset_host(host);
|
||
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
|
||
if (!IS_ERR(mmc->supply.vqmmc) && host->vqmmc_enabled)
|
||
regulator_disable(mmc->supply.vqmmc);
|
||
host->vqmmc_enabled = false;
|
||
break;
|
||
}
|
||
|
||
/* set bus width */
|
||
switch (ios->bus_width) {
|
||
case MMC_BUS_WIDTH_1:
|
||
mmc_writel(host, REG_WIDTH, SDXC_WIDTH1);
|
||
break;
|
||
case MMC_BUS_WIDTH_4:
|
||
mmc_writel(host, REG_WIDTH, SDXC_WIDTH4);
|
||
break;
|
||
case MMC_BUS_WIDTH_8:
|
||
mmc_writel(host, REG_WIDTH, SDXC_WIDTH8);
|
||
break;
|
||
}
|
||
|
||
/* set ddr mode */
|
||
rval = mmc_readl(host, REG_GCTRL);
|
||
if (ios->timing == MMC_TIMING_UHS_DDR50 ||
|
||
ios->timing == MMC_TIMING_MMC_DDR52)
|
||
rval |= SDXC_DDR_MODE;
|
||
else
|
||
rval &= ~SDXC_DDR_MODE;
|
||
mmc_writel(host, REG_GCTRL, rval);
|
||
|
||
/* set up clock */
|
||
if (ios->clock && ios->power_mode) {
|
||
host->ferror = sunxi_mmc_clk_set_rate(host, ios);
|
||
/* Android code had a usleep_range(50000, 55000); here */
|
||
}
|
||
}
|
||
|
||
static int sunxi_mmc_volt_switch(struct mmc_host *mmc, struct mmc_ios *ios)
|
||
{
|
||
/* vqmmc regulator is available */
|
||
if (!IS_ERR(mmc->supply.vqmmc))
|
||
return mmc_regulator_set_vqmmc(mmc, ios);
|
||
|
||
/* no vqmmc regulator, assume fixed regulator at 3/3.3V */
|
||
if (mmc->ios.signal_voltage == MMC_SIGNAL_VOLTAGE_330)
|
||
return 0;
|
||
|
||
return -EINVAL;
|
||
}
|
||
|
||
static void sunxi_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
|
||
{
|
||
struct sunxi_mmc_host *host = mmc_priv(mmc);
|
||
unsigned long flags;
|
||
u32 imask;
|
||
|
||
spin_lock_irqsave(&host->lock, flags);
|
||
|
||
imask = mmc_readl(host, REG_IMASK);
|
||
if (enable) {
|
||
host->sdio_imask = SDXC_SDIO_INTERRUPT;
|
||
imask |= SDXC_SDIO_INTERRUPT;
|
||
} else {
|
||
host->sdio_imask = 0;
|
||
imask &= ~SDXC_SDIO_INTERRUPT;
|
||
}
|
||
mmc_writel(host, REG_IMASK, imask);
|
||
spin_unlock_irqrestore(&host->lock, flags);
|
||
}
|
||
|
||
static void sunxi_mmc_hw_reset(struct mmc_host *mmc)
|
||
{
|
||
struct sunxi_mmc_host *host = mmc_priv(mmc);
|
||
mmc_writel(host, REG_HWRST, 0);
|
||
udelay(10);
|
||
mmc_writel(host, REG_HWRST, 1);
|
||
udelay(300);
|
||
}
|
||
|
||
static void sunxi_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
|
||
{
|
||
struct sunxi_mmc_host *host = mmc_priv(mmc);
|
||
struct mmc_command *cmd = mrq->cmd;
|
||
struct mmc_data *data = mrq->data;
|
||
unsigned long iflags;
|
||
u32 imask = SDXC_INTERRUPT_ERROR_BIT;
|
||
u32 cmd_val = SDXC_START | (cmd->opcode & 0x3f);
|
||
bool wait_dma = host->wait_dma;
|
||
int ret;
|
||
|
||
/* Check for set_ios errors (should never happen) */
|
||
if (host->ferror) {
|
||
mrq->cmd->error = host->ferror;
|
||
mmc_request_done(mmc, mrq);
|
||
return;
|
||
}
|
||
|
||
if (data) {
|
||
ret = sunxi_mmc_map_dma(host, data);
|
||
if (ret < 0) {
|
||
dev_err(mmc_dev(mmc), "map DMA failed\n");
|
||
cmd->error = ret;
|
||
data->error = ret;
|
||
mmc_request_done(mmc, mrq);
|
||
return;
|
||
}
|
||
}
|
||
|
||
if (cmd->opcode == MMC_GO_IDLE_STATE) {
|
||
cmd_val |= SDXC_SEND_INIT_SEQUENCE;
|
||
imask |= SDXC_COMMAND_DONE;
|
||
}
|
||
|
||
if (cmd->flags & MMC_RSP_PRESENT) {
|
||
cmd_val |= SDXC_RESP_EXPIRE;
|
||
if (cmd->flags & MMC_RSP_136)
|
||
cmd_val |= SDXC_LONG_RESPONSE;
|
||
if (cmd->flags & MMC_RSP_CRC)
|
||
cmd_val |= SDXC_CHECK_RESPONSE_CRC;
|
||
|
||
if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC) {
|
||
cmd_val |= SDXC_DATA_EXPIRE | SDXC_WAIT_PRE_OVER;
|
||
|
||
if (cmd->data->stop) {
|
||
imask |= SDXC_AUTO_COMMAND_DONE;
|
||
cmd_val |= SDXC_SEND_AUTO_STOP;
|
||
} else {
|
||
imask |= SDXC_DATA_OVER;
|
||
}
|
||
|
||
if (cmd->data->flags & MMC_DATA_WRITE)
|
||
cmd_val |= SDXC_WRITE;
|
||
else
|
||
wait_dma = true;
|
||
} else {
|
||
imask |= SDXC_COMMAND_DONE;
|
||
}
|
||
} else {
|
||
imask |= SDXC_COMMAND_DONE;
|
||
}
|
||
|
||
dev_dbg(mmc_dev(mmc), "cmd %d(%08x) arg %x ie 0x%08x len %d\n",
|
||
cmd_val & 0x3f, cmd_val, cmd->arg, imask,
|
||
mrq->data ? mrq->data->blksz * mrq->data->blocks : 0);
|
||
|
||
spin_lock_irqsave(&host->lock, iflags);
|
||
|
||
if (host->mrq || host->manual_stop_mrq) {
|
||
spin_unlock_irqrestore(&host->lock, iflags);
|
||
|
||
if (data)
|
||
dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len,
|
||
sunxi_mmc_get_dma_dir(data));
|
||
|
||
dev_err(mmc_dev(mmc), "request already pending\n");
|
||
mrq->cmd->error = -EBUSY;
|
||
mmc_request_done(mmc, mrq);
|
||
return;
|
||
}
|
||
|
||
if (data) {
|
||
mmc_writel(host, REG_BLKSZ, data->blksz);
|
||
mmc_writel(host, REG_BCNTR, data->blksz * data->blocks);
|
||
sunxi_mmc_start_dma(host, data);
|
||
}
|
||
|
||
host->mrq = mrq;
|
||
host->wait_dma = wait_dma;
|
||
mmc_writel(host, REG_IMASK, host->sdio_imask | imask);
|
||
mmc_writel(host, REG_CARG, cmd->arg);
|
||
mmc_writel(host, REG_CMDR, cmd_val);
|
||
|
||
spin_unlock_irqrestore(&host->lock, iflags);
|
||
}
|
||
|
||
static int sunxi_mmc_card_busy(struct mmc_host *mmc)
|
||
{
|
||
struct sunxi_mmc_host *host = mmc_priv(mmc);
|
||
|
||
return !!(mmc_readl(host, REG_STAS) & SDXC_CARD_DATA_BUSY);
|
||
}
|
||
|
||
static const struct of_device_id sunxi_mmc_of_match[] = {
|
||
{ .compatible = "allwinner,sun4i-a10-mmc", },
|
||
{ .compatible = "allwinner,sun5i-a13-mmc", },
|
||
{ .compatible = "allwinner,sun9i-a80-mmc", },
|
||
{ /* sentinel */ }
|
||
};
|
||
MODULE_DEVICE_TABLE(of, sunxi_mmc_of_match);
|
||
|
||
static struct mmc_host_ops sunxi_mmc_ops = {
|
||
.request = sunxi_mmc_request,
|
||
.set_ios = sunxi_mmc_set_ios,
|
||
.get_ro = mmc_gpio_get_ro,
|
||
.get_cd = mmc_gpio_get_cd,
|
||
.enable_sdio_irq = sunxi_mmc_enable_sdio_irq,
|
||
.start_signal_voltage_switch = sunxi_mmc_volt_switch,
|
||
.hw_reset = sunxi_mmc_hw_reset,
|
||
.card_busy = sunxi_mmc_card_busy,
|
||
};
|
||
|
||
static const struct sunxi_mmc_clk_delay sunxi_mmc_clk_delays[] = {
|
||
[SDXC_CLK_400K] = { .output = 180, .sample = 180 },
|
||
[SDXC_CLK_25M] = { .output = 180, .sample = 75 },
|
||
[SDXC_CLK_50M] = { .output = 90, .sample = 120 },
|
||
[SDXC_CLK_50M_DDR] = { .output = 60, .sample = 120 },
|
||
/* Value from A83T "new timing mode". Works but might not be right. */
|
||
[SDXC_CLK_50M_DDR_8BIT] = { .output = 90, .sample = 180 },
|
||
};
|
||
|
||
static const struct sunxi_mmc_clk_delay sun9i_mmc_clk_delays[] = {
|
||
[SDXC_CLK_400K] = { .output = 180, .sample = 180 },
|
||
[SDXC_CLK_25M] = { .output = 180, .sample = 75 },
|
||
[SDXC_CLK_50M] = { .output = 150, .sample = 120 },
|
||
[SDXC_CLK_50M_DDR] = { .output = 54, .sample = 36 },
|
||
[SDXC_CLK_50M_DDR_8BIT] = { .output = 72, .sample = 72 },
|
||
};
|
||
|
||
static int sunxi_mmc_resource_request(struct sunxi_mmc_host *host,
|
||
struct platform_device *pdev)
|
||
{
|
||
struct device_node *np = pdev->dev.of_node;
|
||
int ret;
|
||
|
||
if (of_device_is_compatible(np, "allwinner,sun4i-a10-mmc"))
|
||
host->idma_des_size_bits = 13;
|
||
else
|
||
host->idma_des_size_bits = 16;
|
||
|
||
if (of_device_is_compatible(np, "allwinner,sun9i-a80-mmc"))
|
||
host->clk_delays = sun9i_mmc_clk_delays;
|
||
else
|
||
host->clk_delays = sunxi_mmc_clk_delays;
|
||
|
||
ret = mmc_regulator_get_supply(host->mmc);
|
||
if (ret) {
|
||
if (ret != -EPROBE_DEFER)
|
||
dev_err(&pdev->dev, "Could not get vmmc supply\n");
|
||
return ret;
|
||
}
|
||
|
||
host->reg_base = devm_ioremap_resource(&pdev->dev,
|
||
platform_get_resource(pdev, IORESOURCE_MEM, 0));
|
||
if (IS_ERR(host->reg_base))
|
||
return PTR_ERR(host->reg_base);
|
||
|
||
host->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
|
||
if (IS_ERR(host->clk_ahb)) {
|
||
dev_err(&pdev->dev, "Could not get ahb clock\n");
|
||
return PTR_ERR(host->clk_ahb);
|
||
}
|
||
|
||
host->clk_mmc = devm_clk_get(&pdev->dev, "mmc");
|
||
if (IS_ERR(host->clk_mmc)) {
|
||
dev_err(&pdev->dev, "Could not get mmc clock\n");
|
||
return PTR_ERR(host->clk_mmc);
|
||
}
|
||
|
||
host->clk_output = devm_clk_get(&pdev->dev, "output");
|
||
if (IS_ERR(host->clk_output)) {
|
||
dev_err(&pdev->dev, "Could not get output clock\n");
|
||
return PTR_ERR(host->clk_output);
|
||
}
|
||
|
||
host->clk_sample = devm_clk_get(&pdev->dev, "sample");
|
||
if (IS_ERR(host->clk_sample)) {
|
||
dev_err(&pdev->dev, "Could not get sample clock\n");
|
||
return PTR_ERR(host->clk_sample);
|
||
}
|
||
|
||
host->reset = devm_reset_control_get_optional(&pdev->dev, "ahb");
|
||
if (PTR_ERR(host->reset) == -EPROBE_DEFER)
|
||
return PTR_ERR(host->reset);
|
||
|
||
ret = clk_prepare_enable(host->clk_ahb);
|
||
if (ret) {
|
||
dev_err(&pdev->dev, "Enable ahb clk err %d\n", ret);
|
||
return ret;
|
||
}
|
||
|
||
ret = clk_prepare_enable(host->clk_mmc);
|
||
if (ret) {
|
||
dev_err(&pdev->dev, "Enable mmc clk err %d\n", ret);
|
||
goto error_disable_clk_ahb;
|
||
}
|
||
|
||
ret = clk_prepare_enable(host->clk_output);
|
||
if (ret) {
|
||
dev_err(&pdev->dev, "Enable output clk err %d\n", ret);
|
||
goto error_disable_clk_mmc;
|
||
}
|
||
|
||
ret = clk_prepare_enable(host->clk_sample);
|
||
if (ret) {
|
||
dev_err(&pdev->dev, "Enable sample clk err %d\n", ret);
|
||
goto error_disable_clk_output;
|
||
}
|
||
|
||
if (!IS_ERR(host->reset)) {
|
||
ret = reset_control_deassert(host->reset);
|
||
if (ret) {
|
||
dev_err(&pdev->dev, "reset err %d\n", ret);
|
||
goto error_disable_clk_sample;
|
||
}
|
||
}
|
||
|
||
/*
|
||
* Sometimes the controller asserts the irq on boot for some reason,
|
||
* make sure the controller is in a sane state before enabling irqs.
|
||
*/
|
||
ret = sunxi_mmc_reset_host(host);
|
||
if (ret)
|
||
goto error_assert_reset;
|
||
|
||
host->irq = platform_get_irq(pdev, 0);
|
||
return devm_request_threaded_irq(&pdev->dev, host->irq, sunxi_mmc_irq,
|
||
sunxi_mmc_handle_manual_stop, 0, "sunxi-mmc", host);
|
||
|
||
error_assert_reset:
|
||
if (!IS_ERR(host->reset))
|
||
reset_control_assert(host->reset);
|
||
error_disable_clk_sample:
|
||
clk_disable_unprepare(host->clk_sample);
|
||
error_disable_clk_output:
|
||
clk_disable_unprepare(host->clk_output);
|
||
error_disable_clk_mmc:
|
||
clk_disable_unprepare(host->clk_mmc);
|
||
error_disable_clk_ahb:
|
||
clk_disable_unprepare(host->clk_ahb);
|
||
return ret;
|
||
}
|
||
|
||
static int sunxi_mmc_probe(struct platform_device *pdev)
|
||
{
|
||
struct sunxi_mmc_host *host;
|
||
struct mmc_host *mmc;
|
||
int ret;
|
||
|
||
mmc = mmc_alloc_host(sizeof(struct sunxi_mmc_host), &pdev->dev);
|
||
if (!mmc) {
|
||
dev_err(&pdev->dev, "mmc alloc host failed\n");
|
||
return -ENOMEM;
|
||
}
|
||
|
||
host = mmc_priv(mmc);
|
||
host->mmc = mmc;
|
||
spin_lock_init(&host->lock);
|
||
|
||
ret = sunxi_mmc_resource_request(host, pdev);
|
||
if (ret)
|
||
goto error_free_host;
|
||
|
||
host->sg_cpu = dma_alloc_coherent(&pdev->dev, PAGE_SIZE,
|
||
&host->sg_dma, GFP_KERNEL);
|
||
if (!host->sg_cpu) {
|
||
dev_err(&pdev->dev, "Failed to allocate DMA descriptor mem\n");
|
||
ret = -ENOMEM;
|
||
goto error_free_host;
|
||
}
|
||
|
||
mmc->ops = &sunxi_mmc_ops;
|
||
mmc->max_blk_count = 8192;
|
||
mmc->max_blk_size = 4096;
|
||
mmc->max_segs = PAGE_SIZE / sizeof(struct sunxi_idma_des);
|
||
mmc->max_seg_size = (1 << host->idma_des_size_bits);
|
||
mmc->max_req_size = mmc->max_seg_size * mmc->max_segs;
|
||
/* 400kHz ~ 52MHz */
|
||
mmc->f_min = 400000;
|
||
mmc->f_max = 52000000;
|
||
mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
|
||
MMC_CAP_1_8V_DDR |
|
||
MMC_CAP_ERASE | MMC_CAP_SDIO_IRQ;
|
||
|
||
ret = mmc_of_parse(mmc);
|
||
if (ret)
|
||
goto error_free_dma;
|
||
|
||
ret = mmc_add_host(mmc);
|
||
if (ret)
|
||
goto error_free_dma;
|
||
|
||
dev_info(&pdev->dev, "base:0x%p irq:%u\n", host->reg_base, host->irq);
|
||
platform_set_drvdata(pdev, mmc);
|
||
return 0;
|
||
|
||
error_free_dma:
|
||
dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
|
||
error_free_host:
|
||
mmc_free_host(mmc);
|
||
return ret;
|
||
}
|
||
|
||
static int sunxi_mmc_remove(struct platform_device *pdev)
|
||
{
|
||
struct mmc_host *mmc = platform_get_drvdata(pdev);
|
||
struct sunxi_mmc_host *host = mmc_priv(mmc);
|
||
|
||
mmc_remove_host(mmc);
|
||
disable_irq(host->irq);
|
||
sunxi_mmc_reset_host(host);
|
||
|
||
if (!IS_ERR(host->reset))
|
||
reset_control_assert(host->reset);
|
||
|
||
clk_disable_unprepare(host->clk_mmc);
|
||
clk_disable_unprepare(host->clk_ahb);
|
||
|
||
dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
|
||
mmc_free_host(mmc);
|
||
|
||
return 0;
|
||
}
|
||
|
||
static struct platform_driver sunxi_mmc_driver = {
|
||
.driver = {
|
||
.name = "sunxi-mmc",
|
||
.of_match_table = of_match_ptr(sunxi_mmc_of_match),
|
||
},
|
||
.probe = sunxi_mmc_probe,
|
||
.remove = sunxi_mmc_remove,
|
||
};
|
||
module_platform_driver(sunxi_mmc_driver);
|
||
|
||
MODULE_DESCRIPTION("Allwinner's SD/MMC Card Controller Driver");
|
||
MODULE_LICENSE("GPL v2");
|
||
MODULE_AUTHOR("David Lanzend<6E>rfer <david.lanzendoerfer@o2s.ch>");
|
||
MODULE_ALIAS("platform:sunxi-mmc");
|