3198 lines
88 KiB
C
3198 lines
88 KiB
C
/*
|
|
* linux/drivers/message/fusion/mptscsih.c
|
|
* For use with LSI Logic PCI chip/adapter(s)
|
|
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
|
|
*
|
|
* Copyright (c) 1999-2007 LSI Logic Corporation
|
|
* (mailto:mpt_linux_developer@lsi.com)
|
|
*
|
|
*/
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; version 2 of the License.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
NO WARRANTY
|
|
THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
|
|
CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
|
|
LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
|
|
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
|
|
solely responsible for determining the appropriateness of using and
|
|
distributing the Program and assumes all risks associated with its
|
|
exercise of rights under this Agreement, including but not limited to
|
|
the risks and costs of program errors, damage to or loss of data,
|
|
programs or equipment, and unavailability or interruption of operations.
|
|
|
|
DISCLAIMER OF LIABILITY
|
|
NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
|
|
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
|
|
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
|
|
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
|
|
USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
|
|
HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
|
|
#include "linux_compat.h" /* linux-2.6 tweaks */
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/kdev_t.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h> /* for mdelay */
|
|
#include <linux/interrupt.h> /* needed for in_interrupt() proto */
|
|
#include <linux/reboot.h> /* notifier code */
|
|
#include <linux/workqueue.h>
|
|
|
|
#include <scsi/scsi.h>
|
|
#include <scsi/scsi_cmnd.h>
|
|
#include <scsi/scsi_device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_tcq.h>
|
|
#include <scsi/scsi_dbg.h>
|
|
|
|
#include "mptbase.h"
|
|
#include "mptscsih.h"
|
|
#include "lsi/mpi_log_sas.h"
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
#define my_NAME "Fusion MPT SCSI Host driver"
|
|
#define my_VERSION MPT_LINUX_VERSION_COMMON
|
|
#define MYNAM "mptscsih"
|
|
|
|
MODULE_AUTHOR(MODULEAUTHOR);
|
|
MODULE_DESCRIPTION(my_NAME);
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(my_VERSION);
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* Other private/forward protos...
|
|
*/
|
|
int mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
|
|
static void mptscsih_report_queue_full(struct scsi_cmnd *sc, SCSIIOReply_t *pScsiReply, SCSIIORequest_t *pScsiReq);
|
|
int mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
|
|
|
|
static int mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt,
|
|
SCSIIORequest_t *pReq, int req_idx);
|
|
static void mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx);
|
|
static void mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply);
|
|
static int mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd);
|
|
static int mptscsih_tm_wait_for_completion(MPT_SCSI_HOST * hd, ulong timeout );
|
|
static int SCPNT_TO_LOOKUP_IDX(struct scsi_cmnd *sc);
|
|
|
|
static int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout);
|
|
|
|
int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
|
|
int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply);
|
|
|
|
int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
|
|
static int mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd);
|
|
static void mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice);
|
|
|
|
void mptscsih_remove(struct pci_dev *);
|
|
void mptscsih_shutdown(struct pci_dev *);
|
|
#ifdef CONFIG_PM
|
|
int mptscsih_suspend(struct pci_dev *pdev, pm_message_t state);
|
|
int mptscsih_resume(struct pci_dev *pdev);
|
|
#endif
|
|
|
|
#define SNS_LEN(scp) sizeof((scp)->sense_buffer)
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_add_sge - Place a simple SGE at address pAddr.
|
|
* @pAddr: virtual address for SGE
|
|
* @flagslength: SGE flags and data transfer length
|
|
* @dma_addr: Physical address
|
|
*
|
|
* This routine places a MPT request frame back on the MPT adapter's
|
|
* FreeQ.
|
|
*/
|
|
static inline void
|
|
mptscsih_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr)
|
|
{
|
|
if (sizeof(dma_addr_t) == sizeof(u64)) {
|
|
SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
|
|
u32 tmp = dma_addr & 0xFFFFFFFF;
|
|
|
|
pSge->FlagsLength = cpu_to_le32(flagslength);
|
|
pSge->Address.Low = cpu_to_le32(tmp);
|
|
tmp = (u32) ((u64)dma_addr >> 32);
|
|
pSge->Address.High = cpu_to_le32(tmp);
|
|
|
|
} else {
|
|
SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
|
|
pSge->FlagsLength = cpu_to_le32(flagslength);
|
|
pSge->Address = cpu_to_le32(dma_addr);
|
|
}
|
|
} /* mptscsih_add_sge() */
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_add_chain - Place a chain SGE at address pAddr.
|
|
* @pAddr: virtual address for SGE
|
|
* @next: nextChainOffset value (u32's)
|
|
* @length: length of next SGL segment
|
|
* @dma_addr: Physical address
|
|
*
|
|
* This routine places a MPT request frame back on the MPT adapter's
|
|
* FreeQ.
|
|
*/
|
|
static inline void
|
|
mptscsih_add_chain(char *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
|
|
{
|
|
if (sizeof(dma_addr_t) == sizeof(u64)) {
|
|
SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
|
|
u32 tmp = dma_addr & 0xFFFFFFFF;
|
|
|
|
pChain->Length = cpu_to_le16(length);
|
|
pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT | mpt_addr_size();
|
|
|
|
pChain->NextChainOffset = next;
|
|
|
|
pChain->Address.Low = cpu_to_le32(tmp);
|
|
tmp = (u32) ((u64)dma_addr >> 32);
|
|
pChain->Address.High = cpu_to_le32(tmp);
|
|
} else {
|
|
SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
|
|
pChain->Length = cpu_to_le16(length);
|
|
pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT | mpt_addr_size();
|
|
pChain->NextChainOffset = next;
|
|
pChain->Address = cpu_to_le32(dma_addr);
|
|
}
|
|
} /* mptscsih_add_chain() */
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* mptscsih_getFreeChainBuffer - Function to get a free chain
|
|
* from the MPT_SCSI_HOST FreeChainQ.
|
|
* @ioc: Pointer to MPT_ADAPTER structure
|
|
* @req_idx: Index of the SCSI IO request frame. (output)
|
|
*
|
|
* return SUCCESS or FAILED
|
|
*/
|
|
static inline int
|
|
mptscsih_getFreeChainBuffer(MPT_ADAPTER *ioc, int *retIndex)
|
|
{
|
|
MPT_FRAME_HDR *chainBuf;
|
|
unsigned long flags;
|
|
int rc;
|
|
int chain_idx;
|
|
|
|
dsgprintk((MYIOC_s_INFO_FMT "getFreeChainBuffer called\n",
|
|
ioc->name));
|
|
spin_lock_irqsave(&ioc->FreeQlock, flags);
|
|
if (!list_empty(&ioc->FreeChainQ)) {
|
|
int offset;
|
|
|
|
chainBuf = list_entry(ioc->FreeChainQ.next, MPT_FRAME_HDR,
|
|
u.frame.linkage.list);
|
|
list_del(&chainBuf->u.frame.linkage.list);
|
|
offset = (u8 *)chainBuf - (u8 *)ioc->ChainBuffer;
|
|
chain_idx = offset / ioc->req_sz;
|
|
rc = SUCCESS;
|
|
dsgprintk((MYIOC_s_ERR_FMT "getFreeChainBuffer chainBuf=%p ChainBuffer=%p offset=%d chain_idx=%d\n",
|
|
ioc->name, chainBuf, ioc->ChainBuffer, offset, chain_idx));
|
|
} else {
|
|
rc = FAILED;
|
|
chain_idx = MPT_HOST_NO_CHAIN;
|
|
dfailprintk((MYIOC_s_INFO_FMT "getFreeChainBuffer failed\n",
|
|
ioc->name));
|
|
}
|
|
spin_unlock_irqrestore(&ioc->FreeQlock, flags);
|
|
|
|
*retIndex = chain_idx;
|
|
return rc;
|
|
} /* mptscsih_getFreeChainBuffer() */
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* mptscsih_AddSGE - Add a SGE (plus chain buffers) to the
|
|
* SCSIIORequest_t Message Frame.
|
|
* @ioc: Pointer to MPT_ADAPTER structure
|
|
* @SCpnt: Pointer to scsi_cmnd structure
|
|
* @pReq: Pointer to SCSIIORequest_t structure
|
|
*
|
|
* Returns ...
|
|
*/
|
|
static int
|
|
mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt,
|
|
SCSIIORequest_t *pReq, int req_idx)
|
|
{
|
|
char *psge;
|
|
char *chainSge;
|
|
struct scatterlist *sg;
|
|
int frm_sz;
|
|
int sges_left, sg_done;
|
|
int chain_idx = MPT_HOST_NO_CHAIN;
|
|
int sgeOffset;
|
|
int numSgeSlots, numSgeThisFrame;
|
|
u32 sgflags, sgdir, thisxfer = 0;
|
|
int chain_dma_off = 0;
|
|
int newIndex;
|
|
int ii;
|
|
dma_addr_t v2;
|
|
u32 RequestNB;
|
|
|
|
sgdir = le32_to_cpu(pReq->Control) & MPI_SCSIIO_CONTROL_DATADIRECTION_MASK;
|
|
if (sgdir == MPI_SCSIIO_CONTROL_WRITE) {
|
|
sgdir = MPT_TRANSFER_HOST_TO_IOC;
|
|
} else {
|
|
sgdir = MPT_TRANSFER_IOC_TO_HOST;
|
|
}
|
|
|
|
psge = (char *) &pReq->SGL;
|
|
frm_sz = ioc->req_sz;
|
|
|
|
/* Map the data portion, if any.
|
|
* sges_left = 0 if no data transfer.
|
|
*/
|
|
if ( (sges_left = SCpnt->use_sg) ) {
|
|
sges_left = pci_map_sg(ioc->pcidev,
|
|
(struct scatterlist *) SCpnt->request_buffer,
|
|
SCpnt->use_sg,
|
|
SCpnt->sc_data_direction);
|
|
if (sges_left == 0)
|
|
return FAILED;
|
|
} else if (SCpnt->request_bufflen) {
|
|
SCpnt->SCp.dma_handle = pci_map_single(ioc->pcidev,
|
|
SCpnt->request_buffer,
|
|
SCpnt->request_bufflen,
|
|
SCpnt->sc_data_direction);
|
|
dsgprintk((MYIOC_s_INFO_FMT "SG: non-SG for %p, len=%d\n",
|
|
ioc->name, SCpnt, SCpnt->request_bufflen));
|
|
mptscsih_add_sge((char *) &pReq->SGL,
|
|
0xD1000000|MPT_SGE_FLAGS_ADDRESSING|sgdir|SCpnt->request_bufflen,
|
|
SCpnt->SCp.dma_handle);
|
|
|
|
return SUCCESS;
|
|
}
|
|
|
|
/* Handle the SG case.
|
|
*/
|
|
sg = (struct scatterlist *) SCpnt->request_buffer;
|
|
sg_done = 0;
|
|
sgeOffset = sizeof(SCSIIORequest_t) - sizeof(SGE_IO_UNION);
|
|
chainSge = NULL;
|
|
|
|
/* Prior to entering this loop - the following must be set
|
|
* current MF: sgeOffset (bytes)
|
|
* chainSge (Null if original MF is not a chain buffer)
|
|
* sg_done (num SGE done for this MF)
|
|
*/
|
|
|
|
nextSGEset:
|
|
numSgeSlots = ((frm_sz - sgeOffset) / (sizeof(u32) + sizeof(dma_addr_t)) );
|
|
numSgeThisFrame = (sges_left < numSgeSlots) ? sges_left : numSgeSlots;
|
|
|
|
sgflags = MPT_SGE_FLAGS_SIMPLE_ELEMENT | MPT_SGE_FLAGS_ADDRESSING | sgdir;
|
|
|
|
/* Get first (num - 1) SG elements
|
|
* Skip any SG entries with a length of 0
|
|
* NOTE: at finish, sg and psge pointed to NEXT data/location positions
|
|
*/
|
|
for (ii=0; ii < (numSgeThisFrame-1); ii++) {
|
|
thisxfer = sg_dma_len(sg);
|
|
if (thisxfer == 0) {
|
|
sg ++; /* Get next SG element from the OS */
|
|
sg_done++;
|
|
continue;
|
|
}
|
|
|
|
v2 = sg_dma_address(sg);
|
|
mptscsih_add_sge(psge, sgflags | thisxfer, v2);
|
|
|
|
sg++; /* Get next SG element from the OS */
|
|
psge += (sizeof(u32) + sizeof(dma_addr_t));
|
|
sgeOffset += (sizeof(u32) + sizeof(dma_addr_t));
|
|
sg_done++;
|
|
}
|
|
|
|
if (numSgeThisFrame == sges_left) {
|
|
/* Add last element, end of buffer and end of list flags.
|
|
*/
|
|
sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT |
|
|
MPT_SGE_FLAGS_END_OF_BUFFER |
|
|
MPT_SGE_FLAGS_END_OF_LIST;
|
|
|
|
/* Add last SGE and set termination flags.
|
|
* Note: Last SGE may have a length of 0 - which should be ok.
|
|
*/
|
|
thisxfer = sg_dma_len(sg);
|
|
|
|
v2 = sg_dma_address(sg);
|
|
mptscsih_add_sge(psge, sgflags | thisxfer, v2);
|
|
/*
|
|
sg++;
|
|
psge += (sizeof(u32) + sizeof(dma_addr_t));
|
|
*/
|
|
sgeOffset += (sizeof(u32) + sizeof(dma_addr_t));
|
|
sg_done++;
|
|
|
|
if (chainSge) {
|
|
/* The current buffer is a chain buffer,
|
|
* but there is not another one.
|
|
* Update the chain element
|
|
* Offset and Length fields.
|
|
*/
|
|
mptscsih_add_chain((char *)chainSge, 0, sgeOffset, ioc->ChainBufferDMA + chain_dma_off);
|
|
} else {
|
|
/* The current buffer is the original MF
|
|
* and there is no Chain buffer.
|
|
*/
|
|
pReq->ChainOffset = 0;
|
|
RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor) + 1) & 0x03;
|
|
dsgprintk((MYIOC_s_INFO_FMT
|
|
"Single Buffer RequestNB=%x, sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset));
|
|
ioc->RequestNB[req_idx] = RequestNB;
|
|
}
|
|
} else {
|
|
/* At least one chain buffer is needed.
|
|
* Complete the first MF
|
|
* - last SGE element, set the LastElement bit
|
|
* - set ChainOffset (words) for orig MF
|
|
* (OR finish previous MF chain buffer)
|
|
* - update MFStructPtr ChainIndex
|
|
* - Populate chain element
|
|
* Also
|
|
* Loop until done.
|
|
*/
|
|
|
|
dsgprintk((MYIOC_s_INFO_FMT "SG: Chain Required! sg done %d\n",
|
|
ioc->name, sg_done));
|
|
|
|
/* Set LAST_ELEMENT flag for last non-chain element
|
|
* in the buffer. Since psge points at the NEXT
|
|
* SGE element, go back one SGE element, update the flags
|
|
* and reset the pointer. (Note: sgflags & thisxfer are already
|
|
* set properly).
|
|
*/
|
|
if (sg_done) {
|
|
u32 *ptmp = (u32 *) (psge - (sizeof(u32) + sizeof(dma_addr_t)));
|
|
sgflags = le32_to_cpu(*ptmp);
|
|
sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT;
|
|
*ptmp = cpu_to_le32(sgflags);
|
|
}
|
|
|
|
if (chainSge) {
|
|
/* The current buffer is a chain buffer.
|
|
* chainSge points to the previous Chain Element.
|
|
* Update its chain element Offset and Length (must
|
|
* include chain element size) fields.
|
|
* Old chain element is now complete.
|
|
*/
|
|
u8 nextChain = (u8) (sgeOffset >> 2);
|
|
sgeOffset += (sizeof(u32) + sizeof(dma_addr_t));
|
|
mptscsih_add_chain((char *)chainSge, nextChain, sgeOffset, ioc->ChainBufferDMA + chain_dma_off);
|
|
} else {
|
|
/* The original MF buffer requires a chain buffer -
|
|
* set the offset.
|
|
* Last element in this MF is a chain element.
|
|
*/
|
|
pReq->ChainOffset = (u8) (sgeOffset >> 2);
|
|
RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor) + 1) & 0x03;
|
|
dsgprintk((MYIOC_s_ERR_FMT "Chain Buffer Needed, RequestNB=%x sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset));
|
|
ioc->RequestNB[req_idx] = RequestNB;
|
|
}
|
|
|
|
sges_left -= sg_done;
|
|
|
|
|
|
/* NOTE: psge points to the beginning of the chain element
|
|
* in current buffer. Get a chain buffer.
|
|
*/
|
|
if ((mptscsih_getFreeChainBuffer(ioc, &newIndex)) == FAILED) {
|
|
dfailprintk((MYIOC_s_INFO_FMT
|
|
"getFreeChainBuffer FAILED SCSI cmd=%02x (%p)\n",
|
|
ioc->name, pReq->CDB[0], SCpnt));
|
|
return FAILED;
|
|
}
|
|
|
|
/* Update the tracking arrays.
|
|
* If chainSge == NULL, update ReqToChain, else ChainToChain
|
|
*/
|
|
if (chainSge) {
|
|
ioc->ChainToChain[chain_idx] = newIndex;
|
|
} else {
|
|
ioc->ReqToChain[req_idx] = newIndex;
|
|
}
|
|
chain_idx = newIndex;
|
|
chain_dma_off = ioc->req_sz * chain_idx;
|
|
|
|
/* Populate the chainSGE for the current buffer.
|
|
* - Set chain buffer pointer to psge and fill
|
|
* out the Address and Flags fields.
|
|
*/
|
|
chainSge = (char *) psge;
|
|
dsgprintk((KERN_INFO " Current buff @ %p (index 0x%x)",
|
|
psge, req_idx));
|
|
|
|
/* Start the SGE for the next buffer
|
|
*/
|
|
psge = (char *) (ioc->ChainBuffer + chain_dma_off);
|
|
sgeOffset = 0;
|
|
sg_done = 0;
|
|
|
|
dsgprintk((KERN_INFO " Chain buff @ %p (index 0x%x)\n",
|
|
psge, chain_idx));
|
|
|
|
/* Start the SGE for the next buffer
|
|
*/
|
|
|
|
goto nextSGEset;
|
|
}
|
|
|
|
return SUCCESS;
|
|
} /* mptscsih_AddSGE() */
|
|
|
|
static void
|
|
mptscsih_issue_sep_command(MPT_ADAPTER *ioc, VirtTarget *vtarget,
|
|
U32 SlotStatus)
|
|
{
|
|
MPT_FRAME_HDR *mf;
|
|
SEPRequest_t *SEPMsg;
|
|
|
|
if (ioc->bus_type == FC)
|
|
return;
|
|
|
|
if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) {
|
|
dfailprintk((MYIOC_s_WARN_FMT "%s: no msg frames!!\n",
|
|
ioc->name,__FUNCTION__));
|
|
return;
|
|
}
|
|
|
|
SEPMsg = (SEPRequest_t *)mf;
|
|
SEPMsg->Function = MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR;
|
|
SEPMsg->Bus = vtarget->channel;
|
|
SEPMsg->TargetID = vtarget->id;
|
|
SEPMsg->Action = MPI_SEP_REQ_ACTION_WRITE_STATUS;
|
|
SEPMsg->SlotStatus = SlotStatus;
|
|
devtverboseprintk((MYIOC_s_WARN_FMT
|
|
"Sending SEP cmd=%x channel=%d id=%d\n",
|
|
ioc->name, SlotStatus, SEPMsg->Bus, SEPMsg->TargetID));
|
|
mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
|
|
}
|
|
|
|
#ifdef MPT_DEBUG_REPLY
|
|
/**
|
|
* mptscsih_iocstatus_info_scsiio - IOCSTATUS information for SCSIIO
|
|
* @ioc: Pointer to MPT_ADAPTER structure
|
|
* @ioc_status: U32 IOCStatus word from IOC
|
|
* @scsi_status: U8 sam status from target
|
|
* @scsi_state: U8 scsi state
|
|
* @sc: original scsi cmnd pointer
|
|
* @mf: Pointer to MPT request frame
|
|
*
|
|
* Refer to lsi/mpi.h.
|
|
**/
|
|
static void
|
|
mptscsih_iocstatus_info_scsiio(MPT_ADAPTER *ioc, u32 ioc_status,
|
|
u8 scsi_status, u8 scsi_state, struct scsi_cmnd *sc)
|
|
{
|
|
char extend_desc[EVENT_DESCR_STR_SZ];
|
|
char *desc = NULL;
|
|
|
|
switch (ioc_status) {
|
|
|
|
case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
|
|
desc = "SCSI Invalid Bus";
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
|
|
desc = "SCSI Invalid TargetID";
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
|
|
/*
|
|
* Inquiry is issued for device scanning
|
|
*/
|
|
if (sc->cmnd[0] != 0x12)
|
|
desc = "SCSI Device Not There";
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
|
|
desc = "SCSI Data Overrun";
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
|
|
desc = "SCSI I/O Data Error";
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
|
|
desc = "SCSI Protocol Error";
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
|
|
desc = "SCSI Task Terminated";
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
|
|
desc = "SCSI Residual Mismatch";
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
|
|
desc = "SCSI Task Management Failed";
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
|
|
desc = "SCSI IOC Terminated";
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
|
|
desc = "SCSI Ext Terminated";
|
|
break;
|
|
}
|
|
|
|
if (!desc)
|
|
return;
|
|
|
|
snprintf(extend_desc, EVENT_DESCR_STR_SZ,
|
|
"[%d:%d:%d:%d] cmd=%02Xh, sam_status=%02Xh state=%02Xh",
|
|
sc->device->host->host_no,
|
|
sc->device->channel, sc->device->id, sc->device->lun,
|
|
sc->cmnd[0], scsi_status, scsi_state);
|
|
|
|
printk(MYIOC_s_INFO_FMT "IOCStatus(0x%04X): %s: %s\n",
|
|
ioc->name, ioc_status, desc, extend_desc);
|
|
}
|
|
#endif
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* mptscsih_io_done - Main SCSI IO callback routine registered to
|
|
* Fusion MPT (base) driver
|
|
* @ioc: Pointer to MPT_ADAPTER structure
|
|
* @mf: Pointer to original MPT request frame
|
|
* @r: Pointer to MPT reply frame (NULL if TurboReply)
|
|
*
|
|
* This routine is called from mpt.c::mpt_interrupt() at the completion
|
|
* of any SCSI IO request.
|
|
* This routine is registered with the Fusion MPT (base) driver at driver
|
|
* load/init time via the mpt_register() API call.
|
|
*
|
|
* Returns 1 indicating alloc'd request frame ptr should be freed.
|
|
*/
|
|
int
|
|
mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
|
|
{
|
|
struct scsi_cmnd *sc;
|
|
MPT_SCSI_HOST *hd;
|
|
SCSIIORequest_t *pScsiReq;
|
|
SCSIIOReply_t *pScsiReply;
|
|
u16 req_idx, req_idx_MR;
|
|
VirtDevice *vdev;
|
|
VirtTarget *vtarget;
|
|
|
|
hd = (MPT_SCSI_HOST *) ioc->sh->hostdata;
|
|
|
|
req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
|
|
req_idx_MR = (mr != NULL) ?
|
|
le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx) : req_idx;
|
|
if ((req_idx != req_idx_MR) ||
|
|
(mf->u.frame.linkage.arg1 == 0xdeadbeaf)) {
|
|
printk(MYIOC_s_ERR_FMT "Received a mf that was already freed\n",
|
|
ioc->name);
|
|
printk (MYIOC_s_ERR_FMT
|
|
"req_idx=%x req_idx_MR=%x mf=%p mr=%p sc=%p\n",
|
|
ioc->name, req_idx, req_idx_MR, mf, mr,
|
|
hd->ScsiLookup[req_idx_MR]);
|
|
return 0;
|
|
}
|
|
|
|
sc = hd->ScsiLookup[req_idx];
|
|
hd->ScsiLookup[req_idx] = NULL;
|
|
if (sc == NULL) {
|
|
MPIHeader_t *hdr = (MPIHeader_t *)mf;
|
|
|
|
/* Remark: writeSDP1 will use the ScsiDoneCtx
|
|
* If a SCSI I/O cmd, device disabled by OS and
|
|
* completion done. Cannot touch sc struct. Just free mem.
|
|
*/
|
|
if (hdr->Function == MPI_FUNCTION_SCSI_IO_REQUEST)
|
|
printk(MYIOC_s_ERR_FMT "NULL ScsiCmd ptr!\n",
|
|
ioc->name);
|
|
|
|
mptscsih_freeChainBuffers(ioc, req_idx);
|
|
return 1;
|
|
}
|
|
|
|
if ((unsigned char *)mf != sc->host_scribble) {
|
|
mptscsih_freeChainBuffers(ioc, req_idx);
|
|
return 1;
|
|
}
|
|
|
|
sc->host_scribble = NULL;
|
|
sc->result = DID_OK << 16; /* Set default reply as OK */
|
|
pScsiReq = (SCSIIORequest_t *) mf;
|
|
pScsiReply = (SCSIIOReply_t *) mr;
|
|
|
|
if((ioc->facts.MsgVersion >= MPI_VERSION_01_05) && pScsiReply){
|
|
dmfprintk((MYIOC_s_INFO_FMT
|
|
"ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d,task-tag=%d)\n",
|
|
ioc->name, mf, mr, sc, req_idx, pScsiReply->TaskTag));
|
|
}else{
|
|
dmfprintk((MYIOC_s_INFO_FMT
|
|
"ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d)\n",
|
|
ioc->name, mf, mr, sc, req_idx));
|
|
}
|
|
|
|
if (pScsiReply == NULL) {
|
|
/* special context reply handling */
|
|
;
|
|
} else {
|
|
u32 xfer_cnt;
|
|
u16 status;
|
|
u8 scsi_state, scsi_status;
|
|
u32 log_info;
|
|
|
|
status = le16_to_cpu(pScsiReply->IOCStatus) & MPI_IOCSTATUS_MASK;
|
|
scsi_state = pScsiReply->SCSIState;
|
|
scsi_status = pScsiReply->SCSIStatus;
|
|
xfer_cnt = le32_to_cpu(pScsiReply->TransferCount);
|
|
sc->resid = sc->request_bufflen - xfer_cnt;
|
|
log_info = le32_to_cpu(pScsiReply->IOCLogInfo);
|
|
|
|
/*
|
|
* if we get a data underrun indication, yet no data was
|
|
* transferred and the SCSI status indicates that the
|
|
* command was never started, change the data underrun
|
|
* to success
|
|
*/
|
|
if (status == MPI_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 &&
|
|
(scsi_status == MPI_SCSI_STATUS_BUSY ||
|
|
scsi_status == MPI_SCSI_STATUS_RESERVATION_CONFLICT ||
|
|
scsi_status == MPI_SCSI_STATUS_TASK_SET_FULL)) {
|
|
status = MPI_IOCSTATUS_SUCCESS;
|
|
}
|
|
|
|
if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID)
|
|
mptscsih_copy_sense_data(sc, hd, mf, pScsiReply);
|
|
|
|
/*
|
|
* Look for + dump FCP ResponseInfo[]!
|
|
*/
|
|
if (scsi_state & MPI_SCSI_STATE_RESPONSE_INFO_VALID &&
|
|
pScsiReply->ResponseInfo) {
|
|
printk(KERN_NOTICE "[%d:%d:%d:%d] "
|
|
"FCP_ResponseInfo=%08xh\n",
|
|
sc->device->host->host_no, sc->device->channel,
|
|
sc->device->id, sc->device->lun,
|
|
le32_to_cpu(pScsiReply->ResponseInfo));
|
|
}
|
|
|
|
switch(status) {
|
|
case MPI_IOCSTATUS_BUSY: /* 0x0002 */
|
|
/* CHECKME!
|
|
* Maybe: DRIVER_BUSY | SUGGEST_RETRY | DID_SOFT_ERROR (retry)
|
|
* But not: DID_BUS_BUSY lest one risk
|
|
* killing interrupt handler:-(
|
|
*/
|
|
sc->result = SAM_STAT_BUSY;
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
|
|
case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
|
|
sc->result = DID_BAD_TARGET << 16;
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
|
|
/* Spoof to SCSI Selection Timeout! */
|
|
if (ioc->bus_type != FC)
|
|
sc->result = DID_NO_CONNECT << 16;
|
|
/* else fibre, just stall until rescan event */
|
|
else
|
|
sc->result = DID_REQUEUE << 16;
|
|
|
|
if (hd->sel_timeout[pScsiReq->TargetID] < 0xFFFF)
|
|
hd->sel_timeout[pScsiReq->TargetID]++;
|
|
|
|
vdev = sc->device->hostdata;
|
|
if (!vdev)
|
|
break;
|
|
vtarget = vdev->vtarget;
|
|
if (vtarget->tflags & MPT_TARGET_FLAGS_LED_ON) {
|
|
mptscsih_issue_sep_command(ioc, vtarget,
|
|
MPI_SEP_REQ_SLOTSTATUS_UNCONFIGURED);
|
|
vtarget->tflags &= ~MPT_TARGET_FLAGS_LED_ON;
|
|
}
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
|
|
if ( ioc->bus_type == SAS ) {
|
|
u16 ioc_status = le16_to_cpu(pScsiReply->IOCStatus);
|
|
if (ioc_status & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
|
|
if ((log_info & SAS_LOGINFO_MASK)
|
|
== SAS_LOGINFO_NEXUS_LOSS) {
|
|
sc->result = (DID_BUS_BUSY << 16);
|
|
break;
|
|
}
|
|
}
|
|
} else if (ioc->bus_type == FC) {
|
|
/*
|
|
* The FC IOC may kill a request for variety of
|
|
* reasons, some of which may be recovered by a
|
|
* retry, some which are unlikely to be
|
|
* recovered. Return DID_ERROR instead of
|
|
* DID_RESET to permit retry of the command,
|
|
* just not an infinite number of them
|
|
*/
|
|
sc->result = DID_ERROR << 16;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Allow non-SAS & non-NEXUS_LOSS to drop into below code
|
|
*/
|
|
|
|
case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
|
|
case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
|
|
/* Linux handles an unsolicited DID_RESET better
|
|
* than an unsolicited DID_ABORT.
|
|
*/
|
|
sc->result = DID_RESET << 16;
|
|
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
|
|
sc->resid = sc->request_bufflen - xfer_cnt;
|
|
if((xfer_cnt==0)||(sc->underflow > xfer_cnt))
|
|
sc->result=DID_SOFT_ERROR << 16;
|
|
else /* Sufficient data transfer occurred */
|
|
sc->result = (DID_OK << 16) | scsi_status;
|
|
dreplyprintk((KERN_NOTICE
|
|
"RESIDUAL_MISMATCH: result=%x on channel=%d id=%d\n",
|
|
sc->result, sc->device->channel, sc->device->id));
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
|
|
/*
|
|
* Do upfront check for valid SenseData and give it
|
|
* precedence!
|
|
*/
|
|
sc->result = (DID_OK << 16) | scsi_status;
|
|
if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) {
|
|
/* Have already saved the status and sense data
|
|
*/
|
|
;
|
|
} else {
|
|
if (xfer_cnt < sc->underflow) {
|
|
if (scsi_status == SAM_STAT_BUSY)
|
|
sc->result = SAM_STAT_BUSY;
|
|
else
|
|
sc->result = DID_SOFT_ERROR << 16;
|
|
}
|
|
if (scsi_state & (MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS)) {
|
|
/* What to do?
|
|
*/
|
|
sc->result = DID_SOFT_ERROR << 16;
|
|
}
|
|
else if (scsi_state & MPI_SCSI_STATE_TERMINATED) {
|
|
/* Not real sure here either... */
|
|
sc->result = DID_RESET << 16;
|
|
}
|
|
}
|
|
|
|
dreplyprintk((KERN_NOTICE " sc->underflow={report ERR if < %02xh bytes xfer'd}\n",
|
|
sc->underflow));
|
|
dreplyprintk((KERN_NOTICE " ActBytesXferd=%02xh\n", xfer_cnt));
|
|
/* Report Queue Full
|
|
*/
|
|
if (scsi_status == MPI_SCSI_STATUS_TASK_SET_FULL)
|
|
mptscsih_report_queue_full(sc, pScsiReply, pScsiReq);
|
|
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
|
|
sc->resid=0;
|
|
case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
|
|
case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */
|
|
sc->result = (DID_OK << 16) | scsi_status;
|
|
if (scsi_state == 0) {
|
|
;
|
|
} else if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) {
|
|
/*
|
|
* If running against circa 200003dd 909 MPT f/w,
|
|
* may get this (AUTOSENSE_VALID) for actual TASK_SET_FULL
|
|
* (QUEUE_FULL) returned from device! --> get 0x0000?128
|
|
* and with SenseBytes set to 0.
|
|
*/
|
|
if (pScsiReply->SCSIStatus == MPI_SCSI_STATUS_TASK_SET_FULL)
|
|
mptscsih_report_queue_full(sc, pScsiReply, pScsiReq);
|
|
|
|
}
|
|
else if (scsi_state &
|
|
(MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS)
|
|
) {
|
|
/*
|
|
* What to do?
|
|
*/
|
|
sc->result = DID_SOFT_ERROR << 16;
|
|
}
|
|
else if (scsi_state & MPI_SCSI_STATE_TERMINATED) {
|
|
/* Not real sure here either... */
|
|
sc->result = DID_RESET << 16;
|
|
}
|
|
else if (scsi_state & MPI_SCSI_STATE_QUEUE_TAG_REJECTED) {
|
|
/* Device Inq. data indicates that it supports
|
|
* QTags, but rejects QTag messages.
|
|
* This command completed OK.
|
|
*
|
|
* Not real sure here either so do nothing... */
|
|
}
|
|
|
|
if (sc->result == MPI_SCSI_STATUS_TASK_SET_FULL)
|
|
mptscsih_report_queue_full(sc, pScsiReply, pScsiReq);
|
|
|
|
/* Add handling of:
|
|
* Reservation Conflict, Busy,
|
|
* Command Terminated, CHECK
|
|
*/
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
|
|
sc->result = DID_SOFT_ERROR << 16;
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */
|
|
case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */
|
|
case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */
|
|
case MPI_IOCSTATUS_RESERVED: /* 0x0005 */
|
|
case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */
|
|
case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */
|
|
case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */
|
|
case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
|
|
case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
|
|
default:
|
|
/*
|
|
* What to do?
|
|
*/
|
|
sc->result = DID_SOFT_ERROR << 16;
|
|
break;
|
|
|
|
} /* switch(status) */
|
|
|
|
#ifdef MPT_DEBUG_REPLY
|
|
if (sc->result) {
|
|
|
|
mptscsih_iocstatus_info_scsiio(ioc, status,
|
|
scsi_status, scsi_state, sc);
|
|
|
|
dreplyprintk(("%s: [%d:%d:%d:%d] cmd=0x%02x "
|
|
"result=0x%08x\n\tiocstatus=0x%04X "
|
|
"scsi_state=0x%02X scsi_status=0x%02X "
|
|
"loginfo=0x%08X\n", __FUNCTION__,
|
|
sc->device->host->host_no, sc->device->channel, sc->device->id,
|
|
sc->device->lun, sc->cmnd[0], sc->result, status,
|
|
scsi_state, scsi_status, log_info));
|
|
|
|
dreplyprintk(("%s: [%d:%d:%d:%d] resid=%d "
|
|
"bufflen=%d xfer_cnt=%d\n", __FUNCTION__,
|
|
sc->device->host->host_no, sc->device->channel, sc->device->id,
|
|
sc->device->lun, sc->resid, sc->request_bufflen,
|
|
xfer_cnt));
|
|
}
|
|
#endif
|
|
|
|
} /* end of address reply case */
|
|
|
|
/* Unmap the DMA buffers, if any. */
|
|
if (sc->use_sg) {
|
|
pci_unmap_sg(ioc->pcidev, (struct scatterlist *) sc->request_buffer,
|
|
sc->use_sg, sc->sc_data_direction);
|
|
} else if (sc->request_bufflen) {
|
|
pci_unmap_single(ioc->pcidev, sc->SCp.dma_handle,
|
|
sc->request_bufflen, sc->sc_data_direction);
|
|
}
|
|
|
|
sc->scsi_done(sc); /* Issue the command callback */
|
|
|
|
/* Free Chain buffers */
|
|
mptscsih_freeChainBuffers(ioc, req_idx);
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* mptscsih_flush_running_cmds - For each command found, search
|
|
* Scsi_Host instance taskQ and reply to OS.
|
|
* Called only if recovering from a FW reload.
|
|
* @hd: Pointer to a SCSI HOST structure
|
|
*
|
|
* Returns: None.
|
|
*
|
|
* Must be called while new I/Os are being queued.
|
|
*/
|
|
static void
|
|
mptscsih_flush_running_cmds(MPT_SCSI_HOST *hd)
|
|
{
|
|
MPT_ADAPTER *ioc = hd->ioc;
|
|
struct scsi_cmnd *SCpnt;
|
|
MPT_FRAME_HDR *mf;
|
|
int ii;
|
|
int max = ioc->req_depth;
|
|
|
|
dprintk((KERN_INFO MYNAM ": flush_ScsiLookup called\n"));
|
|
for (ii= 0; ii < max; ii++) {
|
|
if ((SCpnt = hd->ScsiLookup[ii]) != NULL) {
|
|
|
|
/* Command found.
|
|
*/
|
|
|
|
/* Null ScsiLookup index
|
|
*/
|
|
hd->ScsiLookup[ii] = NULL;
|
|
|
|
mf = MPT_INDEX_2_MFPTR(ioc, ii);
|
|
dmfprintk(( "flush: ScsiDone (mf=%p,sc=%p)\n",
|
|
mf, SCpnt));
|
|
|
|
/* Free Chain buffers */
|
|
mptscsih_freeChainBuffers(ioc, ii);
|
|
|
|
/* Free Message frames */
|
|
mpt_free_msg_frame(ioc, mf);
|
|
|
|
if ((unsigned char *)mf != SCpnt->host_scribble)
|
|
continue;
|
|
|
|
/* Set status, free OS resources (SG DMA buffers)
|
|
* Do OS callback
|
|
*/
|
|
if (SCpnt->use_sg) {
|
|
pci_unmap_sg(ioc->pcidev,
|
|
(struct scatterlist *) SCpnt->request_buffer,
|
|
SCpnt->use_sg,
|
|
SCpnt->sc_data_direction);
|
|
} else if (SCpnt->request_bufflen) {
|
|
pci_unmap_single(ioc->pcidev,
|
|
SCpnt->SCp.dma_handle,
|
|
SCpnt->request_bufflen,
|
|
SCpnt->sc_data_direction);
|
|
}
|
|
SCpnt->result = DID_RESET << 16;
|
|
SCpnt->host_scribble = NULL;
|
|
|
|
SCpnt->scsi_done(SCpnt); /* Issue the command callback */
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* mptscsih_search_running_cmds - Delete any commands associated
|
|
* with the specified target and lun. Function called only
|
|
* when a lun is disable by mid-layer.
|
|
* Do NOT access the referenced scsi_cmnd structure or
|
|
* members. Will cause either a paging or NULL ptr error.
|
|
* (BUT, BUT, BUT, the code does reference it! - mdr)
|
|
* @hd: Pointer to a SCSI HOST structure
|
|
* @vdevice: per device private data
|
|
*
|
|
* Returns: None.
|
|
*
|
|
* Called from slave_destroy.
|
|
*/
|
|
static void
|
|
mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
|
|
{
|
|
SCSIIORequest_t *mf = NULL;
|
|
int ii;
|
|
int max = hd->ioc->req_depth;
|
|
struct scsi_cmnd *sc;
|
|
struct scsi_lun lun;
|
|
|
|
dsprintk((KERN_INFO MYNAM ": search_running channel %d id %d lun %d max %d\n",
|
|
vdevice->vtarget->channel, vdevice->vtarget->id, vdevice->lun, max));
|
|
|
|
for (ii=0; ii < max; ii++) {
|
|
if ((sc = hd->ScsiLookup[ii]) != NULL) {
|
|
|
|
mf = (SCSIIORequest_t *)MPT_INDEX_2_MFPTR(hd->ioc, ii);
|
|
if (mf == NULL)
|
|
continue;
|
|
int_to_scsilun(vdevice->lun, &lun);
|
|
if ((mf->Bus != vdevice->vtarget->channel) ||
|
|
(mf->TargetID != vdevice->vtarget->id) ||
|
|
memcmp(lun.scsi_lun, mf->LUN, 8))
|
|
continue;
|
|
dsprintk(( "search_running: found (sc=%p, mf = %p) "
|
|
"channel %d id %d, lun %d \n", hd->ScsiLookup[ii],
|
|
mf, mf->Bus, mf->TargetID, vdevice->lun));
|
|
|
|
/* Cleanup
|
|
*/
|
|
hd->ScsiLookup[ii] = NULL;
|
|
mptscsih_freeChainBuffers(hd->ioc, ii);
|
|
mpt_free_msg_frame(hd->ioc, (MPT_FRAME_HDR *)mf);
|
|
if ((unsigned char *)mf != sc->host_scribble)
|
|
continue;
|
|
if (sc->use_sg) {
|
|
pci_unmap_sg(hd->ioc->pcidev,
|
|
(struct scatterlist *) sc->request_buffer,
|
|
sc->use_sg,
|
|
sc->sc_data_direction);
|
|
} else if (sc->request_bufflen) {
|
|
pci_unmap_single(hd->ioc->pcidev,
|
|
sc->SCp.dma_handle,
|
|
sc->request_bufflen,
|
|
sc->sc_data_direction);
|
|
}
|
|
sc->host_scribble = NULL;
|
|
sc->result = DID_NO_CONNECT << 16;
|
|
sc->scsi_done(sc);
|
|
}
|
|
}
|
|
return;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* mptscsih_report_queue_full - Report QUEUE_FULL status returned
|
|
* from a SCSI target device.
|
|
* @sc: Pointer to scsi_cmnd structure
|
|
* @pScsiReply: Pointer to SCSIIOReply_t
|
|
* @pScsiReq: Pointer to original SCSI request
|
|
*
|
|
* This routine periodically reports QUEUE_FULL status returned from a
|
|
* SCSI target device. It reports this to the console via kernel
|
|
* printk() API call, not more than once every 10 seconds.
|
|
*/
|
|
static void
|
|
mptscsih_report_queue_full(struct scsi_cmnd *sc, SCSIIOReply_t *pScsiReply, SCSIIORequest_t *pScsiReq)
|
|
{
|
|
long time = jiffies;
|
|
MPT_SCSI_HOST *hd;
|
|
|
|
if (sc->device == NULL)
|
|
return;
|
|
if (sc->device->host == NULL)
|
|
return;
|
|
if ((hd = (MPT_SCSI_HOST *)sc->device->host->hostdata) == NULL)
|
|
return;
|
|
|
|
if (time - hd->last_queue_full > 10 * HZ) {
|
|
dprintk((MYIOC_s_WARN_FMT "Device (%d:%d:%d) reported QUEUE_FULL!\n",
|
|
hd->ioc->name, 0, sc->device->id, sc->device->lun));
|
|
hd->last_queue_full = time;
|
|
}
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* mptscsih_remove - Removed scsi devices
|
|
* @pdev: Pointer to pci_dev structure
|
|
*
|
|
*
|
|
*/
|
|
void
|
|
mptscsih_remove(struct pci_dev *pdev)
|
|
{
|
|
MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
|
|
struct Scsi_Host *host = ioc->sh;
|
|
MPT_SCSI_HOST *hd;
|
|
int sz1;
|
|
|
|
if(!host) {
|
|
mpt_detach(pdev);
|
|
return;
|
|
}
|
|
|
|
scsi_remove_host(host);
|
|
|
|
if((hd = (MPT_SCSI_HOST *)host->hostdata) == NULL)
|
|
return;
|
|
|
|
mptscsih_shutdown(pdev);
|
|
|
|
sz1=0;
|
|
|
|
if (hd->ScsiLookup != NULL) {
|
|
sz1 = hd->ioc->req_depth * sizeof(void *);
|
|
kfree(hd->ScsiLookup);
|
|
hd->ScsiLookup = NULL;
|
|
}
|
|
|
|
dprintk((MYIOC_s_INFO_FMT
|
|
"Free'd ScsiLookup (%d) memory\n",
|
|
hd->ioc->name, sz1));
|
|
|
|
kfree(hd->info_kbuf);
|
|
|
|
/* NULL the Scsi_Host pointer
|
|
*/
|
|
hd->ioc->sh = NULL;
|
|
|
|
scsi_host_put(host);
|
|
|
|
mpt_detach(pdev);
|
|
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* mptscsih_shutdown - reboot notifier
|
|
*
|
|
*/
|
|
void
|
|
mptscsih_shutdown(struct pci_dev *pdev)
|
|
{
|
|
MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
|
|
struct Scsi_Host *host = ioc->sh;
|
|
MPT_SCSI_HOST *hd;
|
|
|
|
if(!host)
|
|
return;
|
|
|
|
hd = (MPT_SCSI_HOST *)host->hostdata;
|
|
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* mptscsih_suspend - Fusion MPT scsi driver suspend routine.
|
|
*
|
|
*
|
|
*/
|
|
int
|
|
mptscsih_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
mptscsih_shutdown(pdev);
|
|
return mpt_suspend(pdev,state);
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* mptscsih_resume - Fusion MPT scsi driver resume routine.
|
|
*
|
|
*
|
|
*/
|
|
int
|
|
mptscsih_resume(struct pci_dev *pdev)
|
|
{
|
|
return mpt_resume(pdev);
|
|
}
|
|
|
|
#endif
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_info - Return information about MPT adapter
|
|
* @SChost: Pointer to Scsi_Host structure
|
|
*
|
|
* (linux scsi_host_template.info routine)
|
|
*
|
|
* Returns pointer to buffer where information was written.
|
|
*/
|
|
const char *
|
|
mptscsih_info(struct Scsi_Host *SChost)
|
|
{
|
|
MPT_SCSI_HOST *h;
|
|
int size = 0;
|
|
|
|
h = (MPT_SCSI_HOST *)SChost->hostdata;
|
|
|
|
if (h) {
|
|
if (h->info_kbuf == NULL)
|
|
if ((h->info_kbuf = kmalloc(0x1000 /* 4Kb */, GFP_KERNEL)) == NULL)
|
|
return h->info_kbuf;
|
|
h->info_kbuf[0] = '\0';
|
|
|
|
mpt_print_ioc_summary(h->ioc, h->info_kbuf, &size, 0, 0);
|
|
h->info_kbuf[size-1] = '\0';
|
|
}
|
|
|
|
return h->info_kbuf;
|
|
}
|
|
|
|
struct info_str {
|
|
char *buffer;
|
|
int length;
|
|
int offset;
|
|
int pos;
|
|
};
|
|
|
|
static void
|
|
mptscsih_copy_mem_info(struct info_str *info, char *data, int len)
|
|
{
|
|
if (info->pos + len > info->length)
|
|
len = info->length - info->pos;
|
|
|
|
if (info->pos + len < info->offset) {
|
|
info->pos += len;
|
|
return;
|
|
}
|
|
|
|
if (info->pos < info->offset) {
|
|
data += (info->offset - info->pos);
|
|
len -= (info->offset - info->pos);
|
|
}
|
|
|
|
if (len > 0) {
|
|
memcpy(info->buffer + info->pos, data, len);
|
|
info->pos += len;
|
|
}
|
|
}
|
|
|
|
static int
|
|
mptscsih_copy_info(struct info_str *info, char *fmt, ...)
|
|
{
|
|
va_list args;
|
|
char buf[81];
|
|
int len;
|
|
|
|
va_start(args, fmt);
|
|
len = vsprintf(buf, fmt, args);
|
|
va_end(args);
|
|
|
|
mptscsih_copy_mem_info(info, buf, len);
|
|
return len;
|
|
}
|
|
|
|
static int
|
|
mptscsih_host_info(MPT_ADAPTER *ioc, char *pbuf, off_t offset, int len)
|
|
{
|
|
struct info_str info;
|
|
|
|
info.buffer = pbuf;
|
|
info.length = len;
|
|
info.offset = offset;
|
|
info.pos = 0;
|
|
|
|
mptscsih_copy_info(&info, "%s: %s, ", ioc->name, ioc->prod_name);
|
|
mptscsih_copy_info(&info, "%s%08xh, ", MPT_FW_REV_MAGIC_ID_STRING, ioc->facts.FWVersion.Word);
|
|
mptscsih_copy_info(&info, "Ports=%d, ", ioc->facts.NumberOfPorts);
|
|
mptscsih_copy_info(&info, "MaxQ=%d\n", ioc->req_depth);
|
|
|
|
return ((info.pos > info.offset) ? info.pos - info.offset : 0);
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_proc_info - Return information about MPT adapter
|
|
* @host: scsi host struct
|
|
* @buffer: if write, user data; if read, buffer for user
|
|
* @start: returns the buffer address
|
|
* @offset: if write, 0; if read, the current offset into the buffer from
|
|
* the previous read.
|
|
* @length: if write, return length;
|
|
* @func: write = 1; read = 0
|
|
*
|
|
* (linux scsi_host_template.info routine)
|
|
*/
|
|
int
|
|
mptscsih_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset,
|
|
int length, int func)
|
|
{
|
|
MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata;
|
|
MPT_ADAPTER *ioc = hd->ioc;
|
|
int size = 0;
|
|
|
|
if (func) {
|
|
/*
|
|
* write is not supported
|
|
*/
|
|
} else {
|
|
if (start)
|
|
*start = buffer;
|
|
|
|
size = mptscsih_host_info(ioc, buffer, offset, length);
|
|
}
|
|
|
|
return size;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
#define ADD_INDEX_LOG(req_ent) do { } while(0)
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_qcmd - Primary Fusion MPT SCSI initiator IO start routine.
|
|
* @SCpnt: Pointer to scsi_cmnd structure
|
|
* @done: Pointer SCSI mid-layer IO completion function
|
|
*
|
|
* (linux scsi_host_template.queuecommand routine)
|
|
* This is the primary SCSI IO start routine. Create a MPI SCSIIORequest
|
|
* from a linux scsi_cmnd request and send it to the IOC.
|
|
*
|
|
* Returns 0. (rtn value discarded by linux scsi mid-layer)
|
|
*/
|
|
int
|
|
mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
|
|
{
|
|
MPT_SCSI_HOST *hd;
|
|
MPT_FRAME_HDR *mf;
|
|
SCSIIORequest_t *pScsiReq;
|
|
VirtDevice *vdev = SCpnt->device->hostdata;
|
|
int lun;
|
|
u32 datalen;
|
|
u32 scsictl;
|
|
u32 scsidir;
|
|
u32 cmd_len;
|
|
int my_idx;
|
|
int ii;
|
|
|
|
hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata;
|
|
lun = SCpnt->device->lun;
|
|
SCpnt->scsi_done = done;
|
|
|
|
dmfprintk((MYIOC_s_INFO_FMT "qcmd: SCpnt=%p, done()=%p\n",
|
|
(hd && hd->ioc) ? hd->ioc->name : "ioc?", SCpnt, done));
|
|
|
|
if (hd->resetPending) {
|
|
dtmprintk((MYIOC_s_WARN_FMT "qcmd: SCpnt=%p timeout + 60HZ\n",
|
|
(hd && hd->ioc) ? hd->ioc->name : "ioc?", SCpnt));
|
|
return SCSI_MLQUEUE_HOST_BUSY;
|
|
}
|
|
|
|
/*
|
|
* Put together a MPT SCSI request...
|
|
*/
|
|
if ((mf = mpt_get_msg_frame(hd->ioc->DoneCtx, hd->ioc)) == NULL) {
|
|
dprintk((MYIOC_s_WARN_FMT "QueueCmd, no msg frames!!\n",
|
|
hd->ioc->name));
|
|
return SCSI_MLQUEUE_HOST_BUSY;
|
|
}
|
|
|
|
pScsiReq = (SCSIIORequest_t *) mf;
|
|
|
|
my_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
|
|
|
|
ADD_INDEX_LOG(my_idx);
|
|
|
|
/* TUR's being issued with scsictl=0x02000000 (DATA_IN)!
|
|
* Seems we may receive a buffer (datalen>0) even when there
|
|
* will be no data transfer! GRRRRR...
|
|
*/
|
|
if (SCpnt->sc_data_direction == DMA_FROM_DEVICE) {
|
|
datalen = SCpnt->request_bufflen;
|
|
scsidir = MPI_SCSIIO_CONTROL_READ; /* DATA IN (host<--ioc<--dev) */
|
|
} else if (SCpnt->sc_data_direction == DMA_TO_DEVICE) {
|
|
datalen = SCpnt->request_bufflen;
|
|
scsidir = MPI_SCSIIO_CONTROL_WRITE; /* DATA OUT (host-->ioc-->dev) */
|
|
} else {
|
|
datalen = 0;
|
|
scsidir = MPI_SCSIIO_CONTROL_NODATATRANSFER;
|
|
}
|
|
|
|
/* Default to untagged. Once a target structure has been allocated,
|
|
* use the Inquiry data to determine if device supports tagged.
|
|
*/
|
|
if (vdev
|
|
&& (vdev->vtarget->tflags & MPT_TARGET_FLAGS_Q_YES)
|
|
&& (SCpnt->device->tagged_supported)) {
|
|
scsictl = scsidir | MPI_SCSIIO_CONTROL_SIMPLEQ;
|
|
} else {
|
|
scsictl = scsidir | MPI_SCSIIO_CONTROL_UNTAGGED;
|
|
}
|
|
|
|
/* Use the above information to set up the message frame
|
|
*/
|
|
pScsiReq->TargetID = (u8) vdev->vtarget->id;
|
|
pScsiReq->Bus = vdev->vtarget->channel;
|
|
pScsiReq->ChainOffset = 0;
|
|
if (vdev->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)
|
|
pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
|
|
else
|
|
pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST;
|
|
pScsiReq->CDBLength = SCpnt->cmd_len;
|
|
pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
|
|
pScsiReq->Reserved = 0;
|
|
pScsiReq->MsgFlags = mpt_msg_flags();
|
|
int_to_scsilun(SCpnt->device->lun, (struct scsi_lun *)pScsiReq->LUN);
|
|
pScsiReq->Control = cpu_to_le32(scsictl);
|
|
|
|
/*
|
|
* Write SCSI CDB into the message
|
|
*/
|
|
cmd_len = SCpnt->cmd_len;
|
|
for (ii=0; ii < cmd_len; ii++)
|
|
pScsiReq->CDB[ii] = SCpnt->cmnd[ii];
|
|
|
|
for (ii=cmd_len; ii < 16; ii++)
|
|
pScsiReq->CDB[ii] = 0;
|
|
|
|
/* DataLength */
|
|
pScsiReq->DataLength = cpu_to_le32(datalen);
|
|
|
|
/* SenseBuffer low address */
|
|
pScsiReq->SenseBufferLowAddr = cpu_to_le32(hd->ioc->sense_buf_low_dma
|
|
+ (my_idx * MPT_SENSE_BUFFER_ALLOC));
|
|
|
|
/* Now add the SG list
|
|
* Always have a SGE even if null length.
|
|
*/
|
|
if (datalen == 0) {
|
|
/* Add a NULL SGE */
|
|
mptscsih_add_sge((char *)&pScsiReq->SGL, MPT_SGE_FLAGS_SSIMPLE_READ | 0,
|
|
(dma_addr_t) -1);
|
|
} else {
|
|
/* Add a 32 or 64 bit SGE */
|
|
if (mptscsih_AddSGE(hd->ioc, SCpnt, pScsiReq, my_idx) != SUCCESS)
|
|
goto fail;
|
|
}
|
|
|
|
SCpnt->host_scribble = (unsigned char *)mf;
|
|
hd->ScsiLookup[my_idx] = SCpnt;
|
|
|
|
mpt_put_msg_frame(hd->ioc->DoneCtx, hd->ioc, mf);
|
|
dmfprintk((MYIOC_s_INFO_FMT "Issued SCSI cmd (%p) mf=%p idx=%d\n",
|
|
hd->ioc->name, SCpnt, mf, my_idx));
|
|
DBG_DUMP_REQUEST_FRAME(mf)
|
|
return 0;
|
|
|
|
fail:
|
|
hd->ScsiLookup[my_idx] = NULL;
|
|
mptscsih_freeChainBuffers(hd->ioc, my_idx);
|
|
mpt_free_msg_frame(hd->ioc, mf);
|
|
return SCSI_MLQUEUE_HOST_BUSY;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* mptscsih_freeChainBuffers - Function to free chain buffers associated
|
|
* with a SCSI IO request
|
|
* @hd: Pointer to the MPT_SCSI_HOST instance
|
|
* @req_idx: Index of the SCSI IO request frame.
|
|
*
|
|
* Called if SG chain buffer allocation fails and mptscsih callbacks.
|
|
* No return.
|
|
*/
|
|
static void
|
|
mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx)
|
|
{
|
|
MPT_FRAME_HDR *chain;
|
|
unsigned long flags;
|
|
int chain_idx;
|
|
int next;
|
|
|
|
/* Get the first chain index and reset
|
|
* tracker state.
|
|
*/
|
|
chain_idx = ioc->ReqToChain[req_idx];
|
|
ioc->ReqToChain[req_idx] = MPT_HOST_NO_CHAIN;
|
|
|
|
while (chain_idx != MPT_HOST_NO_CHAIN) {
|
|
|
|
/* Save the next chain buffer index */
|
|
next = ioc->ChainToChain[chain_idx];
|
|
|
|
/* Free this chain buffer and reset
|
|
* tracker
|
|
*/
|
|
ioc->ChainToChain[chain_idx] = MPT_HOST_NO_CHAIN;
|
|
|
|
chain = (MPT_FRAME_HDR *) (ioc->ChainBuffer
|
|
+ (chain_idx * ioc->req_sz));
|
|
|
|
spin_lock_irqsave(&ioc->FreeQlock, flags);
|
|
list_add_tail(&chain->u.frame.linkage.list, &ioc->FreeChainQ);
|
|
spin_unlock_irqrestore(&ioc->FreeQlock, flags);
|
|
|
|
dmfprintk((MYIOC_s_INFO_FMT "FreeChainBuffers (index %d)\n",
|
|
ioc->name, chain_idx));
|
|
|
|
/* handle next */
|
|
chain_idx = next;
|
|
}
|
|
return;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* Reset Handling
|
|
*/
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_TMHandler - Generic handler for SCSI Task Management.
|
|
* @hd: Pointer to MPT SCSI HOST structure
|
|
* @type: Task Management type
|
|
* @channel: channel number for task management
|
|
* @id: Logical Target ID for reset (if appropriate)
|
|
* @lun: Logical Unit for reset (if appropriate)
|
|
* @ctx2abort: Context for the task to be aborted (if appropriate)
|
|
* @timeout: timeout for task management control
|
|
*
|
|
* Fall through to mpt_HardResetHandler if: not operational, too many
|
|
* failed TM requests or handshake failure.
|
|
*
|
|
* Remark: Currently invoked from a non-interrupt thread (_bh).
|
|
*
|
|
* Remark: With old EH code, at most 1 SCSI TaskMgmt function per IOC
|
|
* will be active.
|
|
*
|
|
* Returns 0 for SUCCESS, or %FAILED.
|
|
**/
|
|
int
|
|
mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout)
|
|
{
|
|
MPT_ADAPTER *ioc;
|
|
int rc = -1;
|
|
u32 ioc_raw_state;
|
|
unsigned long flags;
|
|
|
|
ioc = hd->ioc;
|
|
dtmprintk((MYIOC_s_INFO_FMT "TMHandler Entered!\n", ioc->name));
|
|
|
|
// SJR - CHECKME - Can we avoid this here?
|
|
// (mpt_HardResetHandler has this check...)
|
|
spin_lock_irqsave(&ioc->diagLock, flags);
|
|
if ((ioc->diagPending) || (ioc->alt_ioc && ioc->alt_ioc->diagPending)) {
|
|
spin_unlock_irqrestore(&ioc->diagLock, flags);
|
|
return FAILED;
|
|
}
|
|
spin_unlock_irqrestore(&ioc->diagLock, flags);
|
|
|
|
/* Wait a fixed amount of time for the TM pending flag to be cleared.
|
|
* If we time out and not bus reset, then we return a FAILED status
|
|
* to the caller.
|
|
* The call to mptscsih_tm_pending_wait() will set the pending flag
|
|
* if we are
|
|
* successful. Otherwise, reload the FW.
|
|
*/
|
|
if (mptscsih_tm_pending_wait(hd) == FAILED) {
|
|
if (type == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
|
|
dtmprintk((KERN_INFO MYNAM ": %s: TMHandler abort: "
|
|
"Timed out waiting for last TM (%d) to complete! \n",
|
|
hd->ioc->name, hd->tmPending));
|
|
return FAILED;
|
|
} else if (type == MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET) {
|
|
dtmprintk((KERN_INFO MYNAM ": %s: TMHandler target "
|
|
"reset: Timed out waiting for last TM (%d) "
|
|
"to complete! \n", hd->ioc->name,
|
|
hd->tmPending));
|
|
return FAILED;
|
|
} else if (type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) {
|
|
dtmprintk((KERN_INFO MYNAM ": %s: TMHandler bus reset: "
|
|
"Timed out waiting for last TM (%d) to complete! \n",
|
|
hd->ioc->name, hd->tmPending));
|
|
return FAILED;
|
|
}
|
|
} else {
|
|
spin_lock_irqsave(&hd->ioc->FreeQlock, flags);
|
|
hd->tmPending |= (1 << type);
|
|
spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
|
|
}
|
|
|
|
ioc_raw_state = mpt_GetIocState(hd->ioc, 0);
|
|
|
|
if ((ioc_raw_state & MPI_IOC_STATE_MASK) != MPI_IOC_STATE_OPERATIONAL) {
|
|
printk(MYIOC_s_WARN_FMT
|
|
"TM Handler for type=%x: IOC Not operational (0x%x)!\n",
|
|
ioc->name, type, ioc_raw_state);
|
|
printk(KERN_WARNING " Issuing HardReset!!\n");
|
|
if (mpt_HardResetHandler(ioc, CAN_SLEEP) < 0)
|
|
printk((KERN_WARNING "TMHandler: HardReset "
|
|
"FAILED!!\n"));
|
|
return FAILED;
|
|
}
|
|
|
|
if (ioc_raw_state & MPI_DOORBELL_ACTIVE) {
|
|
printk(MYIOC_s_WARN_FMT
|
|
"TM Handler for type=%x: ioc_state: "
|
|
"DOORBELL_ACTIVE (0x%x)!\n",
|
|
ioc->name, type, ioc_raw_state);
|
|
return FAILED;
|
|
}
|
|
|
|
/* Isse the Task Mgmt request.
|
|
*/
|
|
if (hd->hard_resets < -1)
|
|
hd->hard_resets++;
|
|
|
|
rc = mptscsih_IssueTaskMgmt(hd, type, channel, id, lun,
|
|
ctx2abort, timeout);
|
|
if (rc)
|
|
printk(MYIOC_s_INFO_FMT "Issue of TaskMgmt failed!\n",
|
|
hd->ioc->name);
|
|
else
|
|
dtmprintk((MYIOC_s_INFO_FMT "Issue of TaskMgmt Successful!\n",
|
|
hd->ioc->name));
|
|
|
|
dtmprintk((MYIOC_s_INFO_FMT "TMHandler rc = %d!\n", hd->ioc->name, rc));
|
|
|
|
return rc;
|
|
}
|
|
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_IssueTaskMgmt - Generic send Task Management function.
|
|
* @hd: Pointer to MPT_SCSI_HOST structure
|
|
* @type: Task Management type
|
|
* @channel: channel number for task management
|
|
* @id: Logical Target ID for reset (if appropriate)
|
|
* @lun: Logical Unit for reset (if appropriate)
|
|
* @ctx2abort: Context for the task to be aborted (if appropriate)
|
|
* @timeout: timeout for task management control
|
|
*
|
|
* Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
|
|
* or a non-interrupt thread. In the former, must not call schedule().
|
|
*
|
|
* Not all fields are meaningfull for all task types.
|
|
*
|
|
* Returns 0 for SUCCESS, or FAILED.
|
|
*
|
|
**/
|
|
static int
|
|
mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout)
|
|
{
|
|
MPT_FRAME_HDR *mf;
|
|
SCSITaskMgmt_t *pScsiTm;
|
|
int ii;
|
|
int retval;
|
|
|
|
/* Return Fail to calling function if no message frames available.
|
|
*/
|
|
if ((mf = mpt_get_msg_frame(hd->ioc->TaskCtx, hd->ioc)) == NULL) {
|
|
dfailprintk((MYIOC_s_ERR_FMT "IssueTaskMgmt, no msg frames!!\n",
|
|
hd->ioc->name));
|
|
return FAILED;
|
|
}
|
|
dtmprintk((MYIOC_s_INFO_FMT "IssueTaskMgmt request @ %p\n",
|
|
hd->ioc->name, mf));
|
|
|
|
/* Format the Request
|
|
*/
|
|
pScsiTm = (SCSITaskMgmt_t *) mf;
|
|
pScsiTm->TargetID = id;
|
|
pScsiTm->Bus = channel;
|
|
pScsiTm->ChainOffset = 0;
|
|
pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT;
|
|
|
|
pScsiTm->Reserved = 0;
|
|
pScsiTm->TaskType = type;
|
|
pScsiTm->Reserved1 = 0;
|
|
pScsiTm->MsgFlags = (type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS)
|
|
? MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION : 0;
|
|
|
|
int_to_scsilun(lun, (struct scsi_lun *)pScsiTm->LUN);
|
|
|
|
for (ii=0; ii < 7; ii++)
|
|
pScsiTm->Reserved2[ii] = 0;
|
|
|
|
pScsiTm->TaskMsgContext = ctx2abort;
|
|
|
|
dtmprintk((MYIOC_s_INFO_FMT "IssueTaskMgmt: ctx2abort (0x%08x) "
|
|
"type=%d\n", hd->ioc->name, ctx2abort, type));
|
|
|
|
DBG_DUMP_TM_REQUEST_FRAME((u32 *)pScsiTm);
|
|
|
|
if ((retval = mpt_send_handshake_request(hd->ioc->TaskCtx, hd->ioc,
|
|
sizeof(SCSITaskMgmt_t), (u32*)pScsiTm, CAN_SLEEP)) != 0) {
|
|
dfailprintk((MYIOC_s_ERR_FMT "send_handshake FAILED!"
|
|
" (hd %p, ioc %p, mf %p, rc=%d) \n", hd->ioc->name, hd,
|
|
hd->ioc, mf, retval));
|
|
goto fail_out;
|
|
}
|
|
|
|
if(mptscsih_tm_wait_for_completion(hd, timeout) == FAILED) {
|
|
dfailprintk((MYIOC_s_ERR_FMT "task management request TIMED OUT!"
|
|
" (hd %p, ioc %p, mf %p) \n", hd->ioc->name, hd,
|
|
hd->ioc, mf));
|
|
dtmprintk((MYIOC_s_INFO_FMT "Calling HardReset! \n",
|
|
hd->ioc->name));
|
|
retval = mpt_HardResetHandler(hd->ioc, CAN_SLEEP);
|
|
dtmprintk((MYIOC_s_INFO_FMT "rc=%d \n",
|
|
hd->ioc->name, retval));
|
|
goto fail_out;
|
|
}
|
|
|
|
/*
|
|
* Handle success case, see if theres a non-zero ioc_status.
|
|
*/
|
|
if (hd->tm_iocstatus == MPI_IOCSTATUS_SUCCESS ||
|
|
hd->tm_iocstatus == MPI_IOCSTATUS_SCSI_TASK_TERMINATED ||
|
|
hd->tm_iocstatus == MPI_IOCSTATUS_SCSI_IOC_TERMINATED)
|
|
retval = 0;
|
|
else
|
|
retval = FAILED;
|
|
|
|
return retval;
|
|
|
|
fail_out:
|
|
|
|
/*
|
|
* Free task managment mf, and corresponding tm flags
|
|
*/
|
|
mpt_free_msg_frame(hd->ioc, mf);
|
|
hd->tmPending = 0;
|
|
hd->tmState = TM_STATE_NONE;
|
|
return FAILED;
|
|
}
|
|
|
|
static int
|
|
mptscsih_get_tm_timeout(MPT_ADAPTER *ioc)
|
|
{
|
|
switch (ioc->bus_type) {
|
|
case FC:
|
|
return 40;
|
|
case SAS:
|
|
return 10;
|
|
case SPI:
|
|
default:
|
|
return 2;
|
|
}
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_abort - Abort linux scsi_cmnd routine, new_eh variant
|
|
* @SCpnt: Pointer to scsi_cmnd structure, IO to be aborted
|
|
*
|
|
* (linux scsi_host_template.eh_abort_handler routine)
|
|
*
|
|
* Returns SUCCESS or FAILED.
|
|
**/
|
|
int
|
|
mptscsih_abort(struct scsi_cmnd * SCpnt)
|
|
{
|
|
MPT_SCSI_HOST *hd;
|
|
MPT_FRAME_HDR *mf;
|
|
u32 ctx2abort;
|
|
int scpnt_idx;
|
|
int retval;
|
|
VirtDevice *vdev;
|
|
ulong sn = SCpnt->serial_number;
|
|
|
|
/* If we can't locate our host adapter structure, return FAILED status.
|
|
*/
|
|
if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL) {
|
|
SCpnt->result = DID_RESET << 16;
|
|
SCpnt->scsi_done(SCpnt);
|
|
dfailprintk((KERN_INFO MYNAM ": mptscsih_abort: "
|
|
"Can't locate host! (sc=%p)\n",
|
|
SCpnt));
|
|
return FAILED;
|
|
}
|
|
|
|
/* Find this command
|
|
*/
|
|
if ((scpnt_idx = SCPNT_TO_LOOKUP_IDX(SCpnt)) < 0) {
|
|
/* Cmd not found in ScsiLookup.
|
|
* Do OS callback.
|
|
*/
|
|
SCpnt->result = DID_RESET << 16;
|
|
dtmprintk((KERN_INFO MYNAM ": %s: mptscsih_abort: "
|
|
"Command not in the active list! (sc=%p)\n",
|
|
hd->ioc->name, SCpnt));
|
|
return SUCCESS;
|
|
}
|
|
|
|
if (hd->resetPending)
|
|
return FAILED;
|
|
|
|
if (hd->timeouts < -1)
|
|
hd->timeouts++;
|
|
|
|
printk(KERN_WARNING MYNAM ": %s: attempting task abort! (sc=%p)\n",
|
|
hd->ioc->name, SCpnt);
|
|
scsi_print_command(SCpnt);
|
|
|
|
/* Most important! Set TaskMsgContext to SCpnt's MsgContext!
|
|
* (the IO to be ABORT'd)
|
|
*
|
|
* NOTE: Since we do not byteswap MsgContext, we do not
|
|
* swap it here either. It is an opaque cookie to
|
|
* the controller, so it does not matter. -DaveM
|
|
*/
|
|
mf = MPT_INDEX_2_MFPTR(hd->ioc, scpnt_idx);
|
|
ctx2abort = mf->u.frame.hwhdr.msgctxu.MsgContext;
|
|
|
|
hd->abortSCpnt = SCpnt;
|
|
|
|
vdev = SCpnt->device->hostdata;
|
|
retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
|
|
vdev->vtarget->channel, vdev->vtarget->id, vdev->lun,
|
|
ctx2abort, mptscsih_get_tm_timeout(hd->ioc));
|
|
|
|
if (SCPNT_TO_LOOKUP_IDX(SCpnt) == scpnt_idx &&
|
|
SCpnt->serial_number == sn)
|
|
retval = FAILED;
|
|
|
|
printk (KERN_WARNING MYNAM ": %s: task abort: %s (sc=%p)\n",
|
|
hd->ioc->name,
|
|
((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
|
|
|
|
if (retval == 0)
|
|
return SUCCESS;
|
|
else
|
|
return FAILED;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_dev_reset - Perform a SCSI TARGET_RESET! new_eh variant
|
|
* @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
|
|
*
|
|
* (linux scsi_host_template.eh_dev_reset_handler routine)
|
|
*
|
|
* Returns SUCCESS or FAILED.
|
|
**/
|
|
int
|
|
mptscsih_dev_reset(struct scsi_cmnd * SCpnt)
|
|
{
|
|
MPT_SCSI_HOST *hd;
|
|
int retval;
|
|
VirtDevice *vdev;
|
|
|
|
/* If we can't locate our host adapter structure, return FAILED status.
|
|
*/
|
|
if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL){
|
|
dtmprintk((KERN_INFO MYNAM ": mptscsih_dev_reset: "
|
|
"Can't locate host! (sc=%p)\n",
|
|
SCpnt));
|
|
return FAILED;
|
|
}
|
|
|
|
if (hd->resetPending)
|
|
return FAILED;
|
|
|
|
printk(KERN_WARNING MYNAM ": %s: attempting target reset! (sc=%p)\n",
|
|
hd->ioc->name, SCpnt);
|
|
scsi_print_command(SCpnt);
|
|
|
|
vdev = SCpnt->device->hostdata;
|
|
retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
|
|
vdev->vtarget->channel, vdev->vtarget->id,
|
|
0, 0, mptscsih_get_tm_timeout(hd->ioc));
|
|
|
|
printk (KERN_WARNING MYNAM ": %s: target reset: %s (sc=%p)\n",
|
|
hd->ioc->name,
|
|
((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
|
|
|
|
if (retval == 0)
|
|
return SUCCESS;
|
|
else
|
|
return FAILED;
|
|
}
|
|
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_bus_reset - Perform a SCSI BUS_RESET! new_eh variant
|
|
* @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
|
|
*
|
|
* (linux scsi_host_template.eh_bus_reset_handler routine)
|
|
*
|
|
* Returns SUCCESS or FAILED.
|
|
**/
|
|
int
|
|
mptscsih_bus_reset(struct scsi_cmnd * SCpnt)
|
|
{
|
|
MPT_SCSI_HOST *hd;
|
|
int retval;
|
|
VirtDevice *vdev;
|
|
|
|
/* If we can't locate our host adapter structure, return FAILED status.
|
|
*/
|
|
if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL){
|
|
dtmprintk((KERN_INFO MYNAM ": mptscsih_bus_reset: "
|
|
"Can't locate host! (sc=%p)\n",
|
|
SCpnt ) );
|
|
return FAILED;
|
|
}
|
|
|
|
printk(KERN_WARNING MYNAM ": %s: attempting bus reset! (sc=%p)\n",
|
|
hd->ioc->name, SCpnt);
|
|
scsi_print_command(SCpnt);
|
|
|
|
if (hd->timeouts < -1)
|
|
hd->timeouts++;
|
|
|
|
vdev = SCpnt->device->hostdata;
|
|
retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
|
|
vdev->vtarget->channel, 0, 0, 0, mptscsih_get_tm_timeout(hd->ioc));
|
|
|
|
printk (KERN_WARNING MYNAM ": %s: bus reset: %s (sc=%p)\n",
|
|
hd->ioc->name,
|
|
((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
|
|
|
|
if (retval == 0)
|
|
return SUCCESS;
|
|
else
|
|
return FAILED;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_host_reset - Perform a SCSI host adapter RESET (new_eh variant)
|
|
* @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
|
|
*
|
|
* (linux scsi_host_template.eh_host_reset_handler routine)
|
|
*
|
|
* Returns SUCCESS or FAILED.
|
|
*/
|
|
int
|
|
mptscsih_host_reset(struct scsi_cmnd *SCpnt)
|
|
{
|
|
MPT_SCSI_HOST * hd;
|
|
int status = SUCCESS;
|
|
|
|
/* If we can't locate the host to reset, then we failed. */
|
|
if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL){
|
|
dtmprintk( ( KERN_INFO MYNAM ": mptscsih_host_reset: "
|
|
"Can't locate host! (sc=%p)\n",
|
|
SCpnt ) );
|
|
return FAILED;
|
|
}
|
|
|
|
printk(KERN_WARNING MYNAM ": %s: Attempting host reset! (sc=%p)\n",
|
|
hd->ioc->name, SCpnt);
|
|
|
|
/* If our attempts to reset the host failed, then return a failed
|
|
* status. The host will be taken off line by the SCSI mid-layer.
|
|
*/
|
|
if (mpt_HardResetHandler(hd->ioc, CAN_SLEEP) < 0){
|
|
status = FAILED;
|
|
} else {
|
|
/* Make sure TM pending is cleared and TM state is set to
|
|
* NONE.
|
|
*/
|
|
hd->tmPending = 0;
|
|
hd->tmState = TM_STATE_NONE;
|
|
}
|
|
|
|
dtmprintk( ( KERN_INFO MYNAM ": mptscsih_host_reset: "
|
|
"Status = %s\n",
|
|
(status == SUCCESS) ? "SUCCESS" : "FAILED" ) );
|
|
|
|
return status;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_tm_pending_wait - wait for pending task management request to complete
|
|
* @hd: Pointer to MPT host structure.
|
|
*
|
|
* Returns {SUCCESS,FAILED}.
|
|
*/
|
|
static int
|
|
mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd)
|
|
{
|
|
unsigned long flags;
|
|
int loop_count = 4 * 10; /* Wait 10 seconds */
|
|
int status = FAILED;
|
|
|
|
do {
|
|
spin_lock_irqsave(&hd->ioc->FreeQlock, flags);
|
|
if (hd->tmState == TM_STATE_NONE) {
|
|
hd->tmState = TM_STATE_IN_PROGRESS;
|
|
hd->tmPending = 1;
|
|
spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
|
|
status = SUCCESS;
|
|
break;
|
|
}
|
|
spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
|
|
msleep(250);
|
|
} while (--loop_count);
|
|
|
|
return status;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_tm_wait_for_completion - wait for completion of TM task
|
|
* @hd: Pointer to MPT host structure.
|
|
* @timeout: timeout value
|
|
*
|
|
* Returns {SUCCESS,FAILED}.
|
|
*/
|
|
static int
|
|
mptscsih_tm_wait_for_completion(MPT_SCSI_HOST * hd, ulong timeout )
|
|
{
|
|
unsigned long flags;
|
|
int loop_count = 4 * timeout;
|
|
int status = FAILED;
|
|
|
|
do {
|
|
spin_lock_irqsave(&hd->ioc->FreeQlock, flags);
|
|
if(hd->tmPending == 0) {
|
|
status = SUCCESS;
|
|
spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
|
|
break;
|
|
}
|
|
spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
|
|
msleep(250);
|
|
} while (--loop_count);
|
|
|
|
return status;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
static void
|
|
mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code)
|
|
{
|
|
char *desc;
|
|
|
|
switch (response_code) {
|
|
case MPI_SCSITASKMGMT_RSP_TM_COMPLETE:
|
|
desc = "The task completed.";
|
|
break;
|
|
case MPI_SCSITASKMGMT_RSP_INVALID_FRAME:
|
|
desc = "The IOC received an invalid frame status.";
|
|
break;
|
|
case MPI_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED:
|
|
desc = "The task type is not supported.";
|
|
break;
|
|
case MPI_SCSITASKMGMT_RSP_TM_FAILED:
|
|
desc = "The requested task failed.";
|
|
break;
|
|
case MPI_SCSITASKMGMT_RSP_TM_SUCCEEDED:
|
|
desc = "The task completed successfully.";
|
|
break;
|
|
case MPI_SCSITASKMGMT_RSP_TM_INVALID_LUN:
|
|
desc = "The LUN request is invalid.";
|
|
break;
|
|
case MPI_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC:
|
|
desc = "The task is in the IOC queue and has not been sent to target.";
|
|
break;
|
|
default:
|
|
desc = "unknown";
|
|
break;
|
|
}
|
|
printk(MYIOC_s_INFO_FMT "Response Code(0x%08x): F/W: %s\n",
|
|
ioc->name, response_code, desc);
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_taskmgmt_complete - Registered with Fusion MPT base driver
|
|
* @ioc: Pointer to MPT_ADAPTER structure
|
|
* @mf: Pointer to SCSI task mgmt request frame
|
|
* @mr: Pointer to SCSI task mgmt reply frame
|
|
*
|
|
* This routine is called from mptbase.c::mpt_interrupt() at the completion
|
|
* of any SCSI task management request.
|
|
* This routine is registered with the MPT (base) driver at driver
|
|
* load/init time via the mpt_register() API call.
|
|
*
|
|
* Returns 1 indicating alloc'd request frame ptr should be freed.
|
|
**/
|
|
int
|
|
mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
|
|
{
|
|
SCSITaskMgmtReply_t *pScsiTmReply;
|
|
SCSITaskMgmt_t *pScsiTmReq;
|
|
MPT_SCSI_HOST *hd;
|
|
unsigned long flags;
|
|
u16 iocstatus;
|
|
u8 tmType;
|
|
u32 termination_count;
|
|
|
|
dtmprintk((MYIOC_s_WARN_FMT "TaskMgmt completed (mf=%p,mr=%p)\n",
|
|
ioc->name, mf, mr));
|
|
if (!ioc->sh) {
|
|
dtmprintk((MYIOC_s_WARN_FMT
|
|
"TaskMgmt Complete: NULL Scsi Host Ptr\n", ioc->name));
|
|
return 1;
|
|
}
|
|
|
|
if (mr == NULL) {
|
|
dtmprintk((MYIOC_s_WARN_FMT
|
|
"ERROR! TaskMgmt Reply: NULL Request %p\n", ioc->name, mf));
|
|
return 1;
|
|
}
|
|
|
|
hd = (MPT_SCSI_HOST *)ioc->sh->hostdata;
|
|
pScsiTmReply = (SCSITaskMgmtReply_t*)mr;
|
|
pScsiTmReq = (SCSITaskMgmt_t*)mf;
|
|
tmType = pScsiTmReq->TaskType;
|
|
iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK;
|
|
termination_count = le32_to_cpu(pScsiTmReply->TerminationCount);
|
|
|
|
if (ioc->facts.MsgVersion >= MPI_VERSION_01_05 &&
|
|
pScsiTmReply->ResponseCode)
|
|
mptscsih_taskmgmt_response_code(ioc,
|
|
pScsiTmReply->ResponseCode);
|
|
DBG_DUMP_TM_REPLY_FRAME((u32 *)pScsiTmReply);
|
|
|
|
#if defined(MPT_DEBUG_REPLY) || defined(MPT_DEBUG_TM)
|
|
printk("%s: ha=%d [%d:%d:0] task_type=0x%02X "
|
|
"iocstatus=0x%04X\n\tloginfo=0x%08X response_code=0x%02X "
|
|
"term_cmnds=%d\n", __FUNCTION__, ioc->id, pScsiTmReply->Bus,
|
|
pScsiTmReply->TargetID, pScsiTmReq->TaskType,
|
|
le16_to_cpu(pScsiTmReply->IOCStatus),
|
|
le32_to_cpu(pScsiTmReply->IOCLogInfo),pScsiTmReply->ResponseCode,
|
|
le32_to_cpu(pScsiTmReply->TerminationCount));
|
|
#endif
|
|
if (!iocstatus) {
|
|
dtmprintk((MYIOC_s_WARN_FMT " TaskMgmt SUCCESS\n", ioc->name));
|
|
hd->abortSCpnt = NULL;
|
|
goto out;
|
|
}
|
|
|
|
/* Error? (anything non-zero?) */
|
|
|
|
/* clear flags and continue.
|
|
*/
|
|
switch (tmType) {
|
|
|
|
case MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK:
|
|
if (termination_count == 1)
|
|
iocstatus = MPI_IOCSTATUS_SCSI_TASK_TERMINATED;
|
|
hd->abortSCpnt = NULL;
|
|
break;
|
|
|
|
case MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS:
|
|
|
|
/* If an internal command is present
|
|
* or the TM failed - reload the FW.
|
|
* FC FW may respond FAILED to an ABORT
|
|
*/
|
|
if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED ||
|
|
hd->cmdPtr)
|
|
if (mpt_HardResetHandler(ioc, NO_SLEEP) < 0)
|
|
printk((KERN_WARNING " Firmware Reload FAILED!!\n"));
|
|
break;
|
|
|
|
case MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET:
|
|
default:
|
|
break;
|
|
}
|
|
|
|
out:
|
|
spin_lock_irqsave(&ioc->FreeQlock, flags);
|
|
hd->tmPending = 0;
|
|
hd->tmState = TM_STATE_NONE;
|
|
hd->tm_iocstatus = iocstatus;
|
|
spin_unlock_irqrestore(&ioc->FreeQlock, flags);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* This is anyones guess quite frankly.
|
|
*/
|
|
int
|
|
mptscsih_bios_param(struct scsi_device * sdev, struct block_device *bdev,
|
|
sector_t capacity, int geom[])
|
|
{
|
|
int heads;
|
|
int sectors;
|
|
sector_t cylinders;
|
|
ulong dummy;
|
|
|
|
heads = 64;
|
|
sectors = 32;
|
|
|
|
dummy = heads * sectors;
|
|
cylinders = capacity;
|
|
sector_div(cylinders,dummy);
|
|
|
|
/*
|
|
* Handle extended translation size for logical drives
|
|
* > 1Gb
|
|
*/
|
|
if ((ulong)capacity >= 0x200000) {
|
|
heads = 255;
|
|
sectors = 63;
|
|
dummy = heads * sectors;
|
|
cylinders = capacity;
|
|
sector_div(cylinders,dummy);
|
|
}
|
|
|
|
/* return result */
|
|
geom[0] = heads;
|
|
geom[1] = sectors;
|
|
geom[2] = cylinders;
|
|
|
|
dprintk((KERN_NOTICE
|
|
": bios_param: Id=%i Lun=%i Channel=%i CHS=%i/%i/%i\n",
|
|
sdev->id, sdev->lun, sdev->channel, (int)cylinders, heads, sectors));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Search IOC page 3 to determine if this is hidden physical disk
|
|
*
|
|
*/
|
|
int
|
|
mptscsih_is_phys_disk(MPT_ADAPTER *ioc, u8 channel, u8 id)
|
|
{
|
|
struct inactive_raid_component_info *component_info;
|
|
int i;
|
|
int rc = 0;
|
|
|
|
if (!ioc->raid_data.pIocPg3)
|
|
goto out;
|
|
for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
|
|
if ((id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) &&
|
|
(channel == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskBus)) {
|
|
rc = 1;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Check inactive list for matching phys disks
|
|
*/
|
|
if (list_empty(&ioc->raid_data.inactive_list))
|
|
goto out;
|
|
|
|
down(&ioc->raid_data.inactive_list_mutex);
|
|
list_for_each_entry(component_info, &ioc->raid_data.inactive_list,
|
|
list) {
|
|
if ((component_info->d.PhysDiskID == id) &&
|
|
(component_info->d.PhysDiskBus == channel))
|
|
rc = 1;
|
|
}
|
|
up(&ioc->raid_data.inactive_list_mutex);
|
|
|
|
out:
|
|
return rc;
|
|
}
|
|
EXPORT_SYMBOL(mptscsih_is_phys_disk);
|
|
|
|
u8
|
|
mptscsih_raid_id_to_num(MPT_ADAPTER *ioc, u8 channel, u8 id)
|
|
{
|
|
struct inactive_raid_component_info *component_info;
|
|
int i;
|
|
int rc = -ENXIO;
|
|
|
|
if (!ioc->raid_data.pIocPg3)
|
|
goto out;
|
|
for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
|
|
if ((id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) &&
|
|
(channel == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskBus)) {
|
|
rc = ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Check inactive list for matching phys disks
|
|
*/
|
|
if (list_empty(&ioc->raid_data.inactive_list))
|
|
goto out;
|
|
|
|
down(&ioc->raid_data.inactive_list_mutex);
|
|
list_for_each_entry(component_info, &ioc->raid_data.inactive_list,
|
|
list) {
|
|
if ((component_info->d.PhysDiskID == id) &&
|
|
(component_info->d.PhysDiskBus == channel))
|
|
rc = component_info->d.PhysDiskNum;
|
|
}
|
|
up(&ioc->raid_data.inactive_list_mutex);
|
|
|
|
out:
|
|
return rc;
|
|
}
|
|
EXPORT_SYMBOL(mptscsih_raid_id_to_num);
|
|
|
|
/*
|
|
* OS entry point to allow for host driver to free allocated memory
|
|
* Called if no device present or device being unloaded
|
|
*/
|
|
void
|
|
mptscsih_slave_destroy(struct scsi_device *sdev)
|
|
{
|
|
struct Scsi_Host *host = sdev->host;
|
|
MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata;
|
|
VirtTarget *vtarget;
|
|
VirtDevice *vdevice;
|
|
struct scsi_target *starget;
|
|
|
|
starget = scsi_target(sdev);
|
|
vtarget = starget->hostdata;
|
|
vdevice = sdev->hostdata;
|
|
|
|
mptscsih_search_running_cmds(hd, vdevice);
|
|
vtarget->num_luns--;
|
|
mptscsih_synchronize_cache(hd, vdevice);
|
|
kfree(vdevice);
|
|
sdev->hostdata = NULL;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* mptscsih_change_queue_depth - This function will set a devices queue depth
|
|
* @sdev: per scsi_device pointer
|
|
* @qdepth: requested queue depth
|
|
*
|
|
* Adding support for new 'change_queue_depth' api.
|
|
*/
|
|
int
|
|
mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
|
|
{
|
|
MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)sdev->host->hostdata;
|
|
VirtTarget *vtarget;
|
|
struct scsi_target *starget;
|
|
int max_depth;
|
|
int tagged;
|
|
|
|
starget = scsi_target(sdev);
|
|
vtarget = starget->hostdata;
|
|
|
|
if (hd->ioc->bus_type == SPI) {
|
|
if (!(vtarget->tflags & MPT_TARGET_FLAGS_Q_YES))
|
|
max_depth = 1;
|
|
else if (sdev->type == TYPE_DISK &&
|
|
vtarget->minSyncFactor <= MPT_ULTRA160)
|
|
max_depth = MPT_SCSI_CMD_PER_DEV_HIGH;
|
|
else
|
|
max_depth = MPT_SCSI_CMD_PER_DEV_LOW;
|
|
} else
|
|
max_depth = MPT_SCSI_CMD_PER_DEV_HIGH;
|
|
|
|
if (qdepth > max_depth)
|
|
qdepth = max_depth;
|
|
if (qdepth == 1)
|
|
tagged = 0;
|
|
else
|
|
tagged = MSG_SIMPLE_TAG;
|
|
|
|
scsi_adjust_queue_depth(sdev, tagged, qdepth);
|
|
return sdev->queue_depth;
|
|
}
|
|
|
|
/*
|
|
* OS entry point to adjust the queue_depths on a per-device basis.
|
|
* Called once per device the bus scan. Use it to force the queue_depth
|
|
* member to 1 if a device does not support Q tags.
|
|
* Return non-zero if fails.
|
|
*/
|
|
int
|
|
mptscsih_slave_configure(struct scsi_device *sdev)
|
|
{
|
|
struct Scsi_Host *sh = sdev->host;
|
|
VirtTarget *vtarget;
|
|
VirtDevice *vdevice;
|
|
struct scsi_target *starget;
|
|
MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)sh->hostdata;
|
|
|
|
starget = scsi_target(sdev);
|
|
vtarget = starget->hostdata;
|
|
vdevice = sdev->hostdata;
|
|
|
|
dsprintk((MYIOC_s_INFO_FMT
|
|
"device @ %p, channel=%d, id=%d, lun=%d\n",
|
|
hd->ioc->name, sdev, sdev->channel, sdev->id, sdev->lun));
|
|
if (hd->ioc->bus_type == SPI)
|
|
dsprintk((MYIOC_s_INFO_FMT
|
|
"sdtr %d wdtr %d ppr %d inq length=%d\n",
|
|
hd->ioc->name, sdev->sdtr, sdev->wdtr,
|
|
sdev->ppr, sdev->inquiry_len));
|
|
|
|
if (sdev->id > sh->max_id) {
|
|
/* error case, should never happen */
|
|
scsi_adjust_queue_depth(sdev, 0, 1);
|
|
goto slave_configure_exit;
|
|
}
|
|
|
|
vdevice->configured_lun = 1;
|
|
mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH);
|
|
|
|
dsprintk((MYIOC_s_INFO_FMT
|
|
"Queue depth=%d, tflags=%x\n",
|
|
hd->ioc->name, sdev->queue_depth, vtarget->tflags));
|
|
|
|
if (hd->ioc->bus_type == SPI)
|
|
dsprintk((MYIOC_s_INFO_FMT
|
|
"negoFlags=%x, maxOffset=%x, SyncFactor=%x\n",
|
|
hd->ioc->name, vtarget->negoFlags, vtarget->maxOffset,
|
|
vtarget->minSyncFactor));
|
|
|
|
slave_configure_exit:
|
|
|
|
dsprintk((MYIOC_s_INFO_FMT
|
|
"tagged %d, simple %d, ordered %d\n",
|
|
hd->ioc->name,sdev->tagged_supported, sdev->simple_tags,
|
|
sdev->ordered_tags));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* Private routines...
|
|
*/
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/* Utility function to copy sense data from the scsi_cmnd buffer
|
|
* to the FC and SCSI target structures.
|
|
*
|
|
*/
|
|
static void
|
|
mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply)
|
|
{
|
|
VirtDevice *vdev;
|
|
SCSIIORequest_t *pReq;
|
|
u32 sense_count = le32_to_cpu(pScsiReply->SenseCount);
|
|
|
|
/* Get target structure
|
|
*/
|
|
pReq = (SCSIIORequest_t *) mf;
|
|
vdev = sc->device->hostdata;
|
|
|
|
if (sense_count) {
|
|
u8 *sense_data;
|
|
int req_index;
|
|
|
|
/* Copy the sense received into the scsi command block. */
|
|
req_index = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
|
|
sense_data = ((u8 *)hd->ioc->sense_buf_pool + (req_index * MPT_SENSE_BUFFER_ALLOC));
|
|
memcpy(sc->sense_buffer, sense_data, SNS_LEN(sc));
|
|
|
|
/* Log SMART data (asc = 0x5D, non-IM case only) if required.
|
|
*/
|
|
if ((hd->ioc->events) && (hd->ioc->eventTypes & (1 << MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE))) {
|
|
if ((sense_data[12] == 0x5D) && (vdev->vtarget->raidVolume == 0)) {
|
|
int idx;
|
|
MPT_ADAPTER *ioc = hd->ioc;
|
|
|
|
idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE;
|
|
ioc->events[idx].event = MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE;
|
|
ioc->events[idx].eventContext = ioc->eventContext;
|
|
|
|
ioc->events[idx].data[0] = (pReq->LUN[1] << 24) ||
|
|
(MPI_EVENT_SCSI_DEV_STAT_RC_SMART_DATA << 16) ||
|
|
(sc->device->channel << 8) || sc->device->id;
|
|
|
|
ioc->events[idx].data[1] = (sense_data[13] << 8) || sense_data[12];
|
|
|
|
ioc->eventContext++;
|
|
if (hd->ioc->pcidev->vendor ==
|
|
PCI_VENDOR_ID_IBM) {
|
|
mptscsih_issue_sep_command(hd->ioc,
|
|
vdev->vtarget, MPI_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT);
|
|
vdev->vtarget->tflags |=
|
|
MPT_TARGET_FLAGS_LED_ON;
|
|
}
|
|
}
|
|
}
|
|
} else {
|
|
dprintk((MYIOC_s_INFO_FMT "Hmmm... SenseData len=0! (?)\n",
|
|
hd->ioc->name));
|
|
}
|
|
}
|
|
|
|
static int
|
|
SCPNT_TO_LOOKUP_IDX(struct scsi_cmnd *sc)
|
|
{
|
|
MPT_SCSI_HOST *hd;
|
|
int i;
|
|
|
|
hd = (MPT_SCSI_HOST *) sc->device->host->hostdata;
|
|
|
|
for (i = 0; i < hd->ioc->req_depth; i++) {
|
|
if (hd->ScsiLookup[i] == sc) {
|
|
return i;
|
|
}
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
int
|
|
mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
|
|
{
|
|
MPT_SCSI_HOST *hd;
|
|
unsigned long flags;
|
|
int ii;
|
|
|
|
dtmprintk((KERN_WARNING MYNAM
|
|
": IOC %s_reset routed to SCSI host driver!\n",
|
|
reset_phase==MPT_IOC_SETUP_RESET ? "setup" : (
|
|
reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post")));
|
|
|
|
/* If a FW reload request arrives after base installed but
|
|
* before all scsi hosts have been attached, then an alt_ioc
|
|
* may have a NULL sh pointer.
|
|
*/
|
|
if ((ioc->sh == NULL) || (ioc->sh->hostdata == NULL))
|
|
return 0;
|
|
else
|
|
hd = (MPT_SCSI_HOST *) ioc->sh->hostdata;
|
|
|
|
if (reset_phase == MPT_IOC_SETUP_RESET) {
|
|
dtmprintk((MYIOC_s_WARN_FMT "Setup-Diag Reset\n", ioc->name));
|
|
|
|
/* Clean Up:
|
|
* 1. Set Hard Reset Pending Flag
|
|
* All new commands go to doneQ
|
|
*/
|
|
hd->resetPending = 1;
|
|
|
|
} else if (reset_phase == MPT_IOC_PRE_RESET) {
|
|
dtmprintk((MYIOC_s_WARN_FMT "Pre-Diag Reset\n", ioc->name));
|
|
|
|
/* 2. Flush running commands
|
|
* Clean ScsiLookup (and associated memory)
|
|
* AND clean mytaskQ
|
|
*/
|
|
|
|
/* 2b. Reply to OS all known outstanding I/O commands.
|
|
*/
|
|
mptscsih_flush_running_cmds(hd);
|
|
|
|
/* 2c. If there was an internal command that
|
|
* has not completed, configuration or io request,
|
|
* free these resources.
|
|
*/
|
|
if (hd->cmdPtr) {
|
|
del_timer(&hd->timer);
|
|
mpt_free_msg_frame(ioc, hd->cmdPtr);
|
|
}
|
|
|
|
dtmprintk((MYIOC_s_WARN_FMT "Pre-Reset complete.\n", ioc->name));
|
|
|
|
} else {
|
|
dtmprintk((MYIOC_s_WARN_FMT "Post-Diag Reset\n", ioc->name));
|
|
|
|
/* Once a FW reload begins, all new OS commands are
|
|
* redirected to the doneQ w/ a reset status.
|
|
* Init all control structures.
|
|
*/
|
|
|
|
/* ScsiLookup initialization
|
|
*/
|
|
for (ii=0; ii < hd->ioc->req_depth; ii++)
|
|
hd->ScsiLookup[ii] = NULL;
|
|
|
|
/* 2. Chain Buffer initialization
|
|
*/
|
|
|
|
/* 4. Renegotiate to all devices, if SPI
|
|
*/
|
|
|
|
/* 5. Enable new commands to be posted
|
|
*/
|
|
spin_lock_irqsave(&ioc->FreeQlock, flags);
|
|
hd->tmPending = 0;
|
|
spin_unlock_irqrestore(&ioc->FreeQlock, flags);
|
|
hd->resetPending = 0;
|
|
hd->tmState = TM_STATE_NONE;
|
|
|
|
/* 6. If there was an internal command,
|
|
* wake this process up.
|
|
*/
|
|
if (hd->cmdPtr) {
|
|
/*
|
|
* Wake up the original calling thread
|
|
*/
|
|
hd->pLocal = &hd->localReply;
|
|
hd->pLocal->completion = MPT_SCANDV_DID_RESET;
|
|
hd->scandv_wait_done = 1;
|
|
wake_up(&hd->scandv_waitq);
|
|
hd->cmdPtr = NULL;
|
|
}
|
|
|
|
dtmprintk((MYIOC_s_WARN_FMT "Post-Reset complete.\n", ioc->name));
|
|
|
|
}
|
|
|
|
return 1; /* currently means nothing really */
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
int
|
|
mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
|
|
{
|
|
MPT_SCSI_HOST *hd;
|
|
u8 event = le32_to_cpu(pEvReply->Event) & 0xFF;
|
|
|
|
devtverboseprintk((MYIOC_s_INFO_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n",
|
|
ioc->name, event));
|
|
|
|
if (ioc->sh == NULL ||
|
|
((hd = (MPT_SCSI_HOST *)ioc->sh->hostdata) == NULL))
|
|
return 1;
|
|
|
|
switch (event) {
|
|
case MPI_EVENT_UNIT_ATTENTION: /* 03 */
|
|
/* FIXME! */
|
|
break;
|
|
case MPI_EVENT_IOC_BUS_RESET: /* 04 */
|
|
case MPI_EVENT_EXT_BUS_RESET: /* 05 */
|
|
if (hd && (ioc->bus_type == SPI) && (hd->soft_resets < -1))
|
|
hd->soft_resets++;
|
|
break;
|
|
case MPI_EVENT_LOGOUT: /* 09 */
|
|
/* FIXME! */
|
|
break;
|
|
|
|
case MPI_EVENT_RESCAN: /* 06 */
|
|
break;
|
|
|
|
/*
|
|
* CHECKME! Don't think we need to do
|
|
* anything for these, but...
|
|
*/
|
|
case MPI_EVENT_LINK_STATUS_CHANGE: /* 07 */
|
|
case MPI_EVENT_LOOP_STATE_CHANGE: /* 08 */
|
|
/*
|
|
* CHECKME! Falling thru...
|
|
*/
|
|
break;
|
|
|
|
case MPI_EVENT_INTEGRATED_RAID: /* 0B */
|
|
break;
|
|
|
|
case MPI_EVENT_NONE: /* 00 */
|
|
case MPI_EVENT_LOG_DATA: /* 01 */
|
|
case MPI_EVENT_STATE_CHANGE: /* 02 */
|
|
case MPI_EVENT_EVENT_CHANGE: /* 0A */
|
|
default:
|
|
dprintk((KERN_INFO " Ignoring event (=%02Xh)\n", event));
|
|
break;
|
|
}
|
|
|
|
return 1; /* currently means nothing really */
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* Bus Scan and Domain Validation functionality ...
|
|
*/
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* mptscsih_scandv_complete - Scan and DV callback routine registered
|
|
* to Fustion MPT (base) driver.
|
|
*
|
|
* @ioc: Pointer to MPT_ADAPTER structure
|
|
* @mf: Pointer to original MPT request frame
|
|
* @mr: Pointer to MPT reply frame (NULL if TurboReply)
|
|
*
|
|
* This routine is called from mpt.c::mpt_interrupt() at the completion
|
|
* of any SCSI IO request.
|
|
* This routine is registered with the Fusion MPT (base) driver at driver
|
|
* load/init time via the mpt_register() API call.
|
|
*
|
|
* Returns 1 indicating alloc'd request frame ptr should be freed.
|
|
*
|
|
* Remark: Sets a completion code and (possibly) saves sense data
|
|
* in the IOC member localReply structure.
|
|
* Used ONLY for DV and other internal commands.
|
|
*/
|
|
int
|
|
mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
|
|
{
|
|
MPT_SCSI_HOST *hd;
|
|
SCSIIORequest_t *pReq;
|
|
int completionCode;
|
|
u16 req_idx;
|
|
|
|
hd = (MPT_SCSI_HOST *) ioc->sh->hostdata;
|
|
|
|
if ((mf == NULL) ||
|
|
(mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth))) {
|
|
printk(MYIOC_s_ERR_FMT
|
|
"ScanDvComplete, %s req frame ptr! (=%p)\n",
|
|
ioc->name, mf?"BAD":"NULL", (void *) mf);
|
|
goto wakeup;
|
|
}
|
|
|
|
del_timer(&hd->timer);
|
|
req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
|
|
hd->ScsiLookup[req_idx] = NULL;
|
|
pReq = (SCSIIORequest_t *) mf;
|
|
|
|
if (mf != hd->cmdPtr) {
|
|
printk(MYIOC_s_WARN_FMT "ScanDvComplete (mf=%p, cmdPtr=%p, idx=%d)\n",
|
|
hd->ioc->name, (void *)mf, (void *) hd->cmdPtr, req_idx);
|
|
}
|
|
hd->cmdPtr = NULL;
|
|
|
|
ddvprintk((MYIOC_s_INFO_FMT "ScanDvComplete (mf=%p,mr=%p,idx=%d)\n",
|
|
hd->ioc->name, mf, mr, req_idx));
|
|
|
|
hd->pLocal = &hd->localReply;
|
|
hd->pLocal->scsiStatus = 0;
|
|
|
|
/* If target struct exists, clear sense valid flag.
|
|
*/
|
|
if (mr == NULL) {
|
|
completionCode = MPT_SCANDV_GOOD;
|
|
} else {
|
|
SCSIIOReply_t *pReply;
|
|
u16 status;
|
|
u8 scsi_status;
|
|
|
|
pReply = (SCSIIOReply_t *) mr;
|
|
|
|
status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
|
|
scsi_status = pReply->SCSIStatus;
|
|
|
|
ddvtprintk((KERN_NOTICE " IOCStatus=%04xh, SCSIState=%02xh, SCSIStatus=%02xh, IOCLogInfo=%08xh\n",
|
|
status, pReply->SCSIState, scsi_status,
|
|
le32_to_cpu(pReply->IOCLogInfo)));
|
|
|
|
switch(status) {
|
|
|
|
case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
|
|
completionCode = MPT_SCANDV_SELECTION_TIMEOUT;
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
|
|
case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
|
|
case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
|
|
case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
|
|
completionCode = MPT_SCANDV_DID_RESET;
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
|
|
case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
|
|
case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */
|
|
if (pReply->Function == MPI_FUNCTION_CONFIG) {
|
|
ConfigReply_t *pr = (ConfigReply_t *)mr;
|
|
completionCode = MPT_SCANDV_GOOD;
|
|
hd->pLocal->header.PageVersion = pr->Header.PageVersion;
|
|
hd->pLocal->header.PageLength = pr->Header.PageLength;
|
|
hd->pLocal->header.PageNumber = pr->Header.PageNumber;
|
|
hd->pLocal->header.PageType = pr->Header.PageType;
|
|
|
|
} else if (pReply->Function == MPI_FUNCTION_RAID_ACTION) {
|
|
/* If the RAID Volume request is successful,
|
|
* return GOOD, else indicate that
|
|
* some type of error occurred.
|
|
*/
|
|
MpiRaidActionReply_t *pr = (MpiRaidActionReply_t *)mr;
|
|
if (le16_to_cpu(pr->ActionStatus) == MPI_RAID_ACTION_ASTATUS_SUCCESS)
|
|
completionCode = MPT_SCANDV_GOOD;
|
|
else
|
|
completionCode = MPT_SCANDV_SOME_ERROR;
|
|
memcpy(hd->pLocal->sense, pr, sizeof(hd->pLocal->sense));
|
|
|
|
} else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID) {
|
|
u8 *sense_data;
|
|
int sz;
|
|
|
|
/* save sense data in global structure
|
|
*/
|
|
completionCode = MPT_SCANDV_SENSE;
|
|
hd->pLocal->scsiStatus = scsi_status;
|
|
sense_data = ((u8 *)hd->ioc->sense_buf_pool +
|
|
(req_idx * MPT_SENSE_BUFFER_ALLOC));
|
|
|
|
sz = min_t(int, pReq->SenseBufferLength,
|
|
SCSI_STD_SENSE_BYTES);
|
|
memcpy(hd->pLocal->sense, sense_data, sz);
|
|
|
|
ddvprintk((KERN_NOTICE " Check Condition, sense ptr %p\n",
|
|
sense_data));
|
|
} else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_FAILED) {
|
|
if (pReq->CDB[0] == INQUIRY)
|
|
completionCode = MPT_SCANDV_ISSUE_SENSE;
|
|
else
|
|
completionCode = MPT_SCANDV_DID_RESET;
|
|
}
|
|
else if (pReply->SCSIState & MPI_SCSI_STATE_NO_SCSI_STATUS)
|
|
completionCode = MPT_SCANDV_DID_RESET;
|
|
else if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
|
|
completionCode = MPT_SCANDV_DID_RESET;
|
|
else {
|
|
completionCode = MPT_SCANDV_GOOD;
|
|
hd->pLocal->scsiStatus = scsi_status;
|
|
}
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
|
|
if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
|
|
completionCode = MPT_SCANDV_DID_RESET;
|
|
else
|
|
completionCode = MPT_SCANDV_SOME_ERROR;
|
|
break;
|
|
|
|
default:
|
|
completionCode = MPT_SCANDV_SOME_ERROR;
|
|
break;
|
|
|
|
} /* switch(status) */
|
|
|
|
ddvtprintk((KERN_NOTICE " completionCode set to %08xh\n",
|
|
completionCode));
|
|
} /* end of address reply case */
|
|
|
|
hd->pLocal->completion = completionCode;
|
|
|
|
/* MF and RF are freed in mpt_interrupt
|
|
*/
|
|
wakeup:
|
|
/* Free Chain buffers (will never chain) in scan or dv */
|
|
//mptscsih_freeChainBuffers(ioc, req_idx);
|
|
|
|
/*
|
|
* Wake up the original calling thread
|
|
*/
|
|
hd->scandv_wait_done = 1;
|
|
wake_up(&hd->scandv_waitq);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/* mptscsih_timer_expired - Call back for timer process.
|
|
* Used only for dv functionality.
|
|
* @data: Pointer to MPT_SCSI_HOST recast as an unsigned long
|
|
*
|
|
*/
|
|
void
|
|
mptscsih_timer_expired(unsigned long data)
|
|
{
|
|
MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *) data;
|
|
|
|
ddvprintk((MYIOC_s_WARN_FMT "Timer Expired! Cmd %p\n", hd->ioc->name, hd->cmdPtr));
|
|
|
|
if (hd->cmdPtr) {
|
|
MPIHeader_t *cmd = (MPIHeader_t *)hd->cmdPtr;
|
|
|
|
if (cmd->Function == MPI_FUNCTION_SCSI_IO_REQUEST) {
|
|
/* Desire to issue a task management request here.
|
|
* TM requests MUST be single threaded.
|
|
* If old eh code and no TM current, issue request.
|
|
* If new eh code, do nothing. Wait for OS cmd timeout
|
|
* for bus reset.
|
|
*/
|
|
ddvtprintk((MYIOC_s_NOTE_FMT "DV Cmd Timeout: NoOp\n", hd->ioc->name));
|
|
} else {
|
|
/* Perform a FW reload */
|
|
if (mpt_HardResetHandler(hd->ioc, NO_SLEEP) < 0) {
|
|
printk(MYIOC_s_WARN_FMT "Firmware Reload FAILED!\n", hd->ioc->name);
|
|
}
|
|
}
|
|
} else {
|
|
/* This should NEVER happen */
|
|
printk(MYIOC_s_WARN_FMT "Null cmdPtr!!!!\n", hd->ioc->name);
|
|
}
|
|
|
|
/* No more processing.
|
|
* TM call will generate an interrupt for SCSI TM Management.
|
|
* The FW will reply to all outstanding commands, callback will finish cleanup.
|
|
* Hard reset clean-up will free all resources.
|
|
*/
|
|
ddvprintk((MYIOC_s_WARN_FMT "Timer Expired Complete!\n", hd->ioc->name));
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_do_cmd - Do internal command.
|
|
* @hd: MPT_SCSI_HOST pointer
|
|
* @io: INTERNAL_CMD pointer.
|
|
*
|
|
* Issue the specified internally generated command and do command
|
|
* specific cleanup. For bus scan / DV only.
|
|
* NOTES: If command is Inquiry and status is good,
|
|
* initialize a target structure, save the data
|
|
*
|
|
* Remark: Single threaded access only.
|
|
*
|
|
* Return:
|
|
* < 0 if an illegal command or no resources
|
|
*
|
|
* 0 if good
|
|
*
|
|
* > 0 if command complete but some type of completion error.
|
|
*/
|
|
static int
|
|
mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
|
|
{
|
|
MPT_FRAME_HDR *mf;
|
|
SCSIIORequest_t *pScsiReq;
|
|
SCSIIORequest_t ReqCopy;
|
|
int my_idx, ii, dir;
|
|
int rc, cmdTimeout;
|
|
int in_isr;
|
|
char cmdLen;
|
|
char CDB[]={0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
|
|
char cmd = io->cmd;
|
|
|
|
in_isr = in_interrupt();
|
|
if (in_isr) {
|
|
dprintk((MYIOC_s_WARN_FMT "Internal SCSI IO request not allowed in ISR context!\n",
|
|
hd->ioc->name));
|
|
return -EPERM;
|
|
}
|
|
|
|
|
|
/* Set command specific information
|
|
*/
|
|
switch (cmd) {
|
|
case INQUIRY:
|
|
cmdLen = 6;
|
|
dir = MPI_SCSIIO_CONTROL_READ;
|
|
CDB[0] = cmd;
|
|
CDB[4] = io->size;
|
|
cmdTimeout = 10;
|
|
break;
|
|
|
|
case TEST_UNIT_READY:
|
|
cmdLen = 6;
|
|
dir = MPI_SCSIIO_CONTROL_READ;
|
|
cmdTimeout = 10;
|
|
break;
|
|
|
|
case START_STOP:
|
|
cmdLen = 6;
|
|
dir = MPI_SCSIIO_CONTROL_READ;
|
|
CDB[0] = cmd;
|
|
CDB[4] = 1; /*Spin up the disk */
|
|
cmdTimeout = 15;
|
|
break;
|
|
|
|
case REQUEST_SENSE:
|
|
cmdLen = 6;
|
|
CDB[0] = cmd;
|
|
CDB[4] = io->size;
|
|
dir = MPI_SCSIIO_CONTROL_READ;
|
|
cmdTimeout = 10;
|
|
break;
|
|
|
|
case READ_BUFFER:
|
|
cmdLen = 10;
|
|
dir = MPI_SCSIIO_CONTROL_READ;
|
|
CDB[0] = cmd;
|
|
if (io->flags & MPT_ICFLAG_ECHO) {
|
|
CDB[1] = 0x0A;
|
|
} else {
|
|
CDB[1] = 0x02;
|
|
}
|
|
|
|
if (io->flags & MPT_ICFLAG_BUF_CAP) {
|
|
CDB[1] |= 0x01;
|
|
}
|
|
CDB[6] = (io->size >> 16) & 0xFF;
|
|
CDB[7] = (io->size >> 8) & 0xFF;
|
|
CDB[8] = io->size & 0xFF;
|
|
cmdTimeout = 10;
|
|
break;
|
|
|
|
case WRITE_BUFFER:
|
|
cmdLen = 10;
|
|
dir = MPI_SCSIIO_CONTROL_WRITE;
|
|
CDB[0] = cmd;
|
|
if (io->flags & MPT_ICFLAG_ECHO) {
|
|
CDB[1] = 0x0A;
|
|
} else {
|
|
CDB[1] = 0x02;
|
|
}
|
|
CDB[6] = (io->size >> 16) & 0xFF;
|
|
CDB[7] = (io->size >> 8) & 0xFF;
|
|
CDB[8] = io->size & 0xFF;
|
|
cmdTimeout = 10;
|
|
break;
|
|
|
|
case RESERVE:
|
|
cmdLen = 6;
|
|
dir = MPI_SCSIIO_CONTROL_READ;
|
|
CDB[0] = cmd;
|
|
cmdTimeout = 10;
|
|
break;
|
|
|
|
case RELEASE:
|
|
cmdLen = 6;
|
|
dir = MPI_SCSIIO_CONTROL_READ;
|
|
CDB[0] = cmd;
|
|
cmdTimeout = 10;
|
|
break;
|
|
|
|
case SYNCHRONIZE_CACHE:
|
|
cmdLen = 10;
|
|
dir = MPI_SCSIIO_CONTROL_READ;
|
|
CDB[0] = cmd;
|
|
// CDB[1] = 0x02; /* set immediate bit */
|
|
cmdTimeout = 10;
|
|
break;
|
|
|
|
default:
|
|
/* Error Case */
|
|
return -EFAULT;
|
|
}
|
|
|
|
/* Get and Populate a free Frame
|
|
*/
|
|
if ((mf = mpt_get_msg_frame(hd->ioc->InternalCtx, hd->ioc)) == NULL) {
|
|
ddvprintk((MYIOC_s_WARN_FMT "No msg frames!\n",
|
|
hd->ioc->name));
|
|
return -EBUSY;
|
|
}
|
|
|
|
pScsiReq = (SCSIIORequest_t *) mf;
|
|
|
|
/* Get the request index */
|
|
my_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
|
|
ADD_INDEX_LOG(my_idx); /* for debug */
|
|
|
|
if (io->flags & MPT_ICFLAG_PHYS_DISK) {
|
|
pScsiReq->TargetID = io->physDiskNum;
|
|
pScsiReq->Bus = 0;
|
|
pScsiReq->ChainOffset = 0;
|
|
pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
|
|
} else {
|
|
pScsiReq->TargetID = io->id;
|
|
pScsiReq->Bus = io->channel;
|
|
pScsiReq->ChainOffset = 0;
|
|
pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST;
|
|
}
|
|
|
|
pScsiReq->CDBLength = cmdLen;
|
|
pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
|
|
|
|
pScsiReq->Reserved = 0;
|
|
|
|
pScsiReq->MsgFlags = mpt_msg_flags();
|
|
/* MsgContext set in mpt_get_msg_fram call */
|
|
|
|
int_to_scsilun(io->lun, (struct scsi_lun *)pScsiReq->LUN);
|
|
|
|
if (io->flags & MPT_ICFLAG_TAGGED_CMD)
|
|
pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_SIMPLEQ);
|
|
else
|
|
pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED);
|
|
|
|
if (cmd == REQUEST_SENSE) {
|
|
pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED);
|
|
ddvprintk((MYIOC_s_INFO_FMT "Untagged! 0x%2x\n",
|
|
hd->ioc->name, cmd));
|
|
}
|
|
|
|
for (ii=0; ii < 16; ii++)
|
|
pScsiReq->CDB[ii] = CDB[ii];
|
|
|
|
pScsiReq->DataLength = cpu_to_le32(io->size);
|
|
pScsiReq->SenseBufferLowAddr = cpu_to_le32(hd->ioc->sense_buf_low_dma
|
|
+ (my_idx * MPT_SENSE_BUFFER_ALLOC));
|
|
|
|
ddvprintk((MYIOC_s_INFO_FMT "Sending Command 0x%x for (%d:%d:%d)\n",
|
|
hd->ioc->name, cmd, io->channel, io->id, io->lun));
|
|
|
|
if (dir == MPI_SCSIIO_CONTROL_READ) {
|
|
mpt_add_sge((char *) &pScsiReq->SGL,
|
|
MPT_SGE_FLAGS_SSIMPLE_READ | io->size,
|
|
io->data_dma);
|
|
} else {
|
|
mpt_add_sge((char *) &pScsiReq->SGL,
|
|
MPT_SGE_FLAGS_SSIMPLE_WRITE | io->size,
|
|
io->data_dma);
|
|
}
|
|
|
|
/* The ISR will free the request frame, but we need
|
|
* the information to initialize the target. Duplicate.
|
|
*/
|
|
memcpy(&ReqCopy, pScsiReq, sizeof(SCSIIORequest_t));
|
|
|
|
/* Issue this command after:
|
|
* finish init
|
|
* add timer
|
|
* Wait until the reply has been received
|
|
* ScsiScanDvCtx callback function will
|
|
* set hd->pLocal;
|
|
* set scandv_wait_done and call wake_up
|
|
*/
|
|
hd->pLocal = NULL;
|
|
hd->timer.expires = jiffies + HZ*cmdTimeout;
|
|
hd->scandv_wait_done = 0;
|
|
|
|
/* Save cmd pointer, for resource free if timeout or
|
|
* FW reload occurs
|
|
*/
|
|
hd->cmdPtr = mf;
|
|
|
|
add_timer(&hd->timer);
|
|
mpt_put_msg_frame(hd->ioc->InternalCtx, hd->ioc, mf);
|
|
wait_event(hd->scandv_waitq, hd->scandv_wait_done);
|
|
|
|
if (hd->pLocal) {
|
|
rc = hd->pLocal->completion;
|
|
hd->pLocal->skip = 0;
|
|
|
|
/* Always set fatal error codes in some cases.
|
|
*/
|
|
if (rc == MPT_SCANDV_SELECTION_TIMEOUT)
|
|
rc = -ENXIO;
|
|
else if (rc == MPT_SCANDV_SOME_ERROR)
|
|
rc = -rc;
|
|
} else {
|
|
rc = -EFAULT;
|
|
/* This should never happen. */
|
|
ddvprintk((MYIOC_s_INFO_FMT "_do_cmd: Null pLocal!!!\n",
|
|
hd->ioc->name));
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_synchronize_cache - Send SYNCHRONIZE_CACHE to all disks.
|
|
* @hd: Pointer to a SCSI HOST structure
|
|
* @vdevice: virtual target device
|
|
*
|
|
* Uses the ISR, but with special processing.
|
|
* MUST be single-threaded.
|
|
*
|
|
*/
|
|
static void
|
|
mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
|
|
{
|
|
INTERNAL_CMD iocmd;
|
|
|
|
/* Following parameters will not change
|
|
* in this routine.
|
|
*/
|
|
iocmd.cmd = SYNCHRONIZE_CACHE;
|
|
iocmd.flags = 0;
|
|
iocmd.physDiskNum = -1;
|
|
iocmd.data = NULL;
|
|
iocmd.data_dma = -1;
|
|
iocmd.size = 0;
|
|
iocmd.rsvd = iocmd.rsvd2 = 0;
|
|
iocmd.channel = vdevice->vtarget->channel;
|
|
iocmd.id = vdevice->vtarget->id;
|
|
iocmd.lun = vdevice->lun;
|
|
|
|
if ((vdevice->vtarget->type == TYPE_DISK) &&
|
|
(vdevice->configured_lun))
|
|
mptscsih_do_cmd(hd, &iocmd);
|
|
}
|
|
|
|
EXPORT_SYMBOL(mptscsih_remove);
|
|
EXPORT_SYMBOL(mptscsih_shutdown);
|
|
#ifdef CONFIG_PM
|
|
EXPORT_SYMBOL(mptscsih_suspend);
|
|
EXPORT_SYMBOL(mptscsih_resume);
|
|
#endif
|
|
EXPORT_SYMBOL(mptscsih_proc_info);
|
|
EXPORT_SYMBOL(mptscsih_info);
|
|
EXPORT_SYMBOL(mptscsih_qcmd);
|
|
EXPORT_SYMBOL(mptscsih_slave_destroy);
|
|
EXPORT_SYMBOL(mptscsih_slave_configure);
|
|
EXPORT_SYMBOL(mptscsih_abort);
|
|
EXPORT_SYMBOL(mptscsih_dev_reset);
|
|
EXPORT_SYMBOL(mptscsih_bus_reset);
|
|
EXPORT_SYMBOL(mptscsih_host_reset);
|
|
EXPORT_SYMBOL(mptscsih_bios_param);
|
|
EXPORT_SYMBOL(mptscsih_io_done);
|
|
EXPORT_SYMBOL(mptscsih_taskmgmt_complete);
|
|
EXPORT_SYMBOL(mptscsih_scandv_complete);
|
|
EXPORT_SYMBOL(mptscsih_event_process);
|
|
EXPORT_SYMBOL(mptscsih_ioc_reset);
|
|
EXPORT_SYMBOL(mptscsih_change_queue_depth);
|
|
EXPORT_SYMBOL(mptscsih_timer_expired);
|
|
EXPORT_SYMBOL(mptscsih_TMHandler);
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|