OpenCloudOS-Kernel/drivers/gpu/drm/i915/intel_drv.h

1637 lines
47 KiB
C

/*
* Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
* Copyright (c) 2007-2008 Intel Corporation
* Jesse Barnes <jesse.barnes@intel.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*/
#ifndef __INTEL_DRV_H__
#define __INTEL_DRV_H__
#include <linux/async.h>
#include <linux/i2c.h>
#include <linux/sched/clock.h>
#include <drm/drm_atomic.h>
#include <drm/drm_crtc.h>
#include <drm/drm_dp_dual_mode_helper.h>
#include <drm/drm_dp_mst_helper.h>
#include <drm/drm_encoder.h>
#include <drm/drm_fb_helper.h>
#include <drm/drm_probe_helper.h>
#include <drm/drm_rect.h>
#include <drm/drm_vblank.h>
#include <drm/i915_drm.h>
#include <drm/i915_mei_hdcp_interface.h>
#include <media/cec-notifier.h>
#include "i915_drv.h"
struct drm_printer;
/*
* Display related stuff
*/
/* these are outputs from the chip - integrated only
external chips are via DVO or SDVO output */
enum intel_output_type {
INTEL_OUTPUT_UNUSED = 0,
INTEL_OUTPUT_ANALOG = 1,
INTEL_OUTPUT_DVO = 2,
INTEL_OUTPUT_SDVO = 3,
INTEL_OUTPUT_LVDS = 4,
INTEL_OUTPUT_TVOUT = 5,
INTEL_OUTPUT_HDMI = 6,
INTEL_OUTPUT_DP = 7,
INTEL_OUTPUT_EDP = 8,
INTEL_OUTPUT_DSI = 9,
INTEL_OUTPUT_DDI = 10,
INTEL_OUTPUT_DP_MST = 11,
};
struct intel_framebuffer {
struct drm_framebuffer base;
struct intel_rotation_info rot_info;
/* for each plane in the normal GTT view */
struct {
unsigned int x, y;
} normal[2];
/* for each plane in the rotated GTT view */
struct {
unsigned int x, y;
unsigned int pitch; /* pixels */
} rotated[2];
};
struct intel_fbdev {
struct drm_fb_helper helper;
struct intel_framebuffer *fb;
struct i915_vma *vma;
unsigned long vma_flags;
async_cookie_t cookie;
int preferred_bpp;
/* Whether or not fbdev hpd processing is temporarily suspended */
bool hpd_suspended : 1;
/* Set when a hotplug was received while HPD processing was
* suspended
*/
bool hpd_waiting : 1;
/* Protects hpd_suspended */
struct mutex hpd_lock;
};
struct intel_encoder {
struct drm_encoder base;
enum intel_output_type type;
enum port port;
unsigned int cloneable;
bool (*hotplug)(struct intel_encoder *encoder,
struct intel_connector *connector);
enum intel_output_type (*compute_output_type)(struct intel_encoder *,
struct intel_crtc_state *,
struct drm_connector_state *);
int (*compute_config)(struct intel_encoder *,
struct intel_crtc_state *,
struct drm_connector_state *);
void (*update_prepare)(struct intel_atomic_state *,
struct intel_encoder *,
struct intel_crtc *);
void (*pre_pll_enable)(struct intel_encoder *,
const struct intel_crtc_state *,
const struct drm_connector_state *);
void (*pre_enable)(struct intel_encoder *,
const struct intel_crtc_state *,
const struct drm_connector_state *);
void (*enable)(struct intel_encoder *,
const struct intel_crtc_state *,
const struct drm_connector_state *);
void (*update_complete)(struct intel_atomic_state *,
struct intel_encoder *,
struct intel_crtc *);
void (*disable)(struct intel_encoder *,
const struct intel_crtc_state *,
const struct drm_connector_state *);
void (*post_disable)(struct intel_encoder *,
const struct intel_crtc_state *,
const struct drm_connector_state *);
void (*post_pll_disable)(struct intel_encoder *,
const struct intel_crtc_state *,
const struct drm_connector_state *);
void (*update_pipe)(struct intel_encoder *,
const struct intel_crtc_state *,
const struct drm_connector_state *);
/* Read out the current hw state of this connector, returning true if
* the encoder is active. If the encoder is enabled it also set the pipe
* it is connected to in the pipe parameter. */
bool (*get_hw_state)(struct intel_encoder *, enum pipe *pipe);
/* Reconstructs the equivalent mode flags for the current hardware
* state. This must be called _after_ display->get_pipe_config has
* pre-filled the pipe config. Note that intel_encoder->base.crtc must
* be set correctly before calling this function. */
void (*get_config)(struct intel_encoder *,
struct intel_crtc_state *pipe_config);
/*
* Acquires the power domains needed for an active encoder during
* hardware state readout.
*/
void (*get_power_domains)(struct intel_encoder *encoder,
struct intel_crtc_state *crtc_state);
/*
* Called during system suspend after all pending requests for the
* encoder are flushed (for example for DP AUX transactions) and
* device interrupts are disabled.
*/
void (*suspend)(struct intel_encoder *);
int crtc_mask;
enum hpd_pin hpd_pin;
enum intel_display_power_domain power_domain;
/* for communication with audio component; protected by av_mutex */
const struct drm_connector *audio_connector;
};
struct intel_panel {
struct drm_display_mode *fixed_mode;
struct drm_display_mode *downclock_mode;
/* backlight */
struct {
bool present;
u32 level;
u32 min;
u32 max;
bool enabled;
bool combination_mode; /* gen 2/4 only */
bool active_low_pwm;
bool alternate_pwm_increment; /* lpt+ */
/* PWM chip */
bool util_pin_active_low; /* bxt+ */
u8 controller; /* bxt+ only */
struct pwm_device *pwm;
struct backlight_device *device;
/* Connector and platform specific backlight functions */
int (*setup)(struct intel_connector *connector, enum pipe pipe);
u32 (*get)(struct intel_connector *connector);
void (*set)(const struct drm_connector_state *conn_state, u32 level);
void (*disable)(const struct drm_connector_state *conn_state);
void (*enable)(const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state);
u32 (*hz_to_pwm)(struct intel_connector *connector, u32 hz);
void (*power)(struct intel_connector *, bool enable);
} backlight;
};
struct intel_digital_port;
enum check_link_response {
HDCP_LINK_PROTECTED = 0,
HDCP_TOPOLOGY_CHANGE,
HDCP_LINK_INTEGRITY_FAILURE,
HDCP_REAUTH_REQUEST
};
/*
* This structure serves as a translation layer between the generic HDCP code
* and the bus-specific code. What that means is that HDCP over HDMI differs
* from HDCP over DP, so to account for these differences, we need to
* communicate with the receiver through this shim.
*
* For completeness, the 2 buses differ in the following ways:
* - DP AUX vs. DDC
* HDCP registers on the receiver are set via DP AUX for DP, and
* they are set via DDC for HDMI.
* - Receiver register offsets
* The offsets of the registers are different for DP vs. HDMI
* - Receiver register masks/offsets
* For instance, the ready bit for the KSV fifo is in a different
* place on DP vs HDMI
* - Receiver register names
* Seriously. In the DP spec, the 16-bit register containing
* downstream information is called BINFO, on HDMI it's called
* BSTATUS. To confuse matters further, DP has a BSTATUS register
* with a completely different definition.
* - KSV FIFO
* On HDMI, the ksv fifo is read all at once, whereas on DP it must
* be read 3 keys at a time
* - Aksv output
* Since Aksv is hidden in hardware, there's different procedures
* to send it over DP AUX vs DDC
*/
struct intel_hdcp_shim {
/* Outputs the transmitter's An and Aksv values to the receiver. */
int (*write_an_aksv)(struct intel_digital_port *intel_dig_port, u8 *an);
/* Reads the receiver's key selection vector */
int (*read_bksv)(struct intel_digital_port *intel_dig_port, u8 *bksv);
/*
* Reads BINFO from DP receivers and BSTATUS from HDMI receivers. The
* definitions are the same in the respective specs, but the names are
* different. Call it BSTATUS since that's the name the HDMI spec
* uses and it was there first.
*/
int (*read_bstatus)(struct intel_digital_port *intel_dig_port,
u8 *bstatus);
/* Determines whether a repeater is present downstream */
int (*repeater_present)(struct intel_digital_port *intel_dig_port,
bool *repeater_present);
/* Reads the receiver's Ri' value */
int (*read_ri_prime)(struct intel_digital_port *intel_dig_port, u8 *ri);
/* Determines if the receiver's KSV FIFO is ready for consumption */
int (*read_ksv_ready)(struct intel_digital_port *intel_dig_port,
bool *ksv_ready);
/* Reads the ksv fifo for num_downstream devices */
int (*read_ksv_fifo)(struct intel_digital_port *intel_dig_port,
int num_downstream, u8 *ksv_fifo);
/* Reads a 32-bit part of V' from the receiver */
int (*read_v_prime_part)(struct intel_digital_port *intel_dig_port,
int i, u32 *part);
/* Enables HDCP signalling on the port */
int (*toggle_signalling)(struct intel_digital_port *intel_dig_port,
bool enable);
/* Ensures the link is still protected */
bool (*check_link)(struct intel_digital_port *intel_dig_port);
/* Detects panel's hdcp capability. This is optional for HDMI. */
int (*hdcp_capable)(struct intel_digital_port *intel_dig_port,
bool *hdcp_capable);
/* HDCP adaptation(DP/HDMI) required on the port */
enum hdcp_wired_protocol protocol;
/* Detects whether sink is HDCP2.2 capable */
int (*hdcp_2_2_capable)(struct intel_digital_port *intel_dig_port,
bool *capable);
/* Write HDCP2.2 messages */
int (*write_2_2_msg)(struct intel_digital_port *intel_dig_port,
void *buf, size_t size);
/* Read HDCP2.2 messages */
int (*read_2_2_msg)(struct intel_digital_port *intel_dig_port,
u8 msg_id, void *buf, size_t size);
/*
* Implementation of DP HDCP2.2 Errata for the communication of stream
* type to Receivers. In DP HDCP2.2 Stream type is one of the input to
* the HDCP2.2 Cipher for En/De-Cryption. Not applicable for HDMI.
*/
int (*config_stream_type)(struct intel_digital_port *intel_dig_port,
bool is_repeater, u8 type);
/* HDCP2.2 Link Integrity Check */
int (*check_2_2_link)(struct intel_digital_port *intel_dig_port);
};
struct intel_hdcp {
const struct intel_hdcp_shim *shim;
/* Mutex for hdcp state of the connector */
struct mutex mutex;
u64 value;
struct delayed_work check_work;
struct work_struct prop_work;
/* HDCP1.4 Encryption status */
bool hdcp_encrypted;
/* HDCP2.2 related definitions */
/* Flag indicates whether this connector supports HDCP2.2 or not. */
bool hdcp2_supported;
/* HDCP2.2 Encryption status */
bool hdcp2_encrypted;
/*
* Content Stream Type defined by content owner. TYPE0(0x0) content can
* flow in the link protected by HDCP2.2 or HDCP1.4, where as TYPE1(0x1)
* content can flow only through a link protected by HDCP2.2.
*/
u8 content_type;
struct hdcp_port_data port_data;
bool is_paired;
bool is_repeater;
/*
* Count of ReceiverID_List received. Initialized to 0 at AKE_INIT.
* Incremented after processing the RepeaterAuth_Send_ReceiverID_List.
* When it rolls over re-auth has to be triggered.
*/
u32 seq_num_v;
/*
* Count of RepeaterAuth_Stream_Manage msg propagated.
* Initialized to 0 on AKE_INIT. Incremented after every successful
* transmission of RepeaterAuth_Stream_Manage message. When it rolls
* over re-Auth has to be triggered.
*/
u32 seq_num_m;
/*
* Work queue to signal the CP_IRQ. Used for the waiters to read the
* available information from HDCP DP sink.
*/
wait_queue_head_t cp_irq_queue;
atomic_t cp_irq_count;
int cp_irq_count_cached;
};
struct intel_connector {
struct drm_connector base;
/*
* The fixed encoder this connector is connected to.
*/
struct intel_encoder *encoder;
/* ACPI device id for ACPI and driver cooperation */
u32 acpi_device_id;
/* Reads out the current hw, returning true if the connector is enabled
* and active (i.e. dpms ON state). */
bool (*get_hw_state)(struct intel_connector *);
/* Panel info for eDP and LVDS */
struct intel_panel panel;
/* Cached EDID for eDP and LVDS. May hold ERR_PTR for invalid EDID. */
struct edid *edid;
struct edid *detect_edid;
/* since POLL and HPD connectors may use the same HPD line keep the native
state of connector->polled in case hotplug storm detection changes it */
u8 polled;
void *port; /* store this opaque as its illegal to dereference it */
struct intel_dp *mst_port;
/* Work struct to schedule a uevent on link train failure */
struct work_struct modeset_retry_work;
struct intel_hdcp hdcp;
};
struct intel_digital_connector_state {
struct drm_connector_state base;
enum hdmi_force_audio force_audio;
int broadcast_rgb;
};
#define to_intel_digital_connector_state(x) container_of(x, struct intel_digital_connector_state, base)
struct dpll {
/* given values */
int n;
int m1, m2;
int p1, p2;
/* derived values */
int dot;
int vco;
int m;
int p;
};
struct intel_atomic_state {
struct drm_atomic_state base;
intel_wakeref_t wakeref;
struct {
/*
* Logical state of cdclk (used for all scaling, watermark,
* etc. calculations and checks). This is computed as if all
* enabled crtcs were active.
*/
struct intel_cdclk_state logical;
/*
* Actual state of cdclk, can be different from the logical
* state only when all crtc's are DPMS off.
*/
struct intel_cdclk_state actual;
int force_min_cdclk;
bool force_min_cdclk_changed;
/* pipe to which cd2x update is synchronized */
enum pipe pipe;
} cdclk;
bool dpll_set, modeset;
/*
* Does this transaction change the pipes that are active? This mask
* tracks which CRTC's have changed their active state at the end of
* the transaction (not counting the temporary disable during modesets).
* This mask should only be non-zero when intel_state->modeset is true,
* but the converse is not necessarily true; simply changing a mode may
* not flip the final active status of any CRTC's
*/
unsigned int active_pipe_changes;
unsigned int active_crtcs;
/* minimum acceptable cdclk for each pipe */
int min_cdclk[I915_MAX_PIPES];
/* minimum acceptable voltage level for each pipe */
u8 min_voltage_level[I915_MAX_PIPES];
struct intel_shared_dpll_state shared_dpll[I915_NUM_PLLS];
/*
* Current watermarks can't be trusted during hardware readout, so
* don't bother calculating intermediate watermarks.
*/
bool skip_intermediate_wm;
bool rps_interactive;
/* Gen9+ only */
struct skl_ddb_values wm_results;
struct i915_sw_fence commit_ready;
struct llist_node freed;
};
struct intel_plane_state {
struct drm_plane_state base;
struct i915_ggtt_view view;
struct i915_vma *vma;
unsigned long flags;
#define PLANE_HAS_FENCE BIT(0)
struct {
u32 offset;
/*
* Plane stride in:
* bytes for 0/180 degree rotation
* pixels for 90/270 degree rotation
*/
u32 stride;
int x, y;
} color_plane[2];
/* plane control register */
u32 ctl;
/* plane color control register */
u32 color_ctl;
/*
* scaler_id
* = -1 : not using a scaler
* >= 0 : using a scalers
*
* plane requiring a scaler:
* - During check_plane, its bit is set in
* crtc_state->scaler_state.scaler_users by calling helper function
* update_scaler_plane.
* - scaler_id indicates the scaler it got assigned.
*
* plane doesn't require a scaler:
* - this can happen when scaling is no more required or plane simply
* got disabled.
* - During check_plane, corresponding bit is reset in
* crtc_state->scaler_state.scaler_users by calling helper function
* update_scaler_plane.
*/
int scaler_id;
/*
* linked_plane:
*
* ICL planar formats require 2 planes that are updated as pairs.
* This member is used to make sure the other plane is also updated
* when required, and for update_slave() to find the correct
* plane_state to pass as argument.
*/
struct intel_plane *linked_plane;
/*
* slave:
* If set don't update use the linked plane's state for updating
* this plane during atomic commit with the update_slave() callback.
*
* It's also used by the watermark code to ignore wm calculations on
* this plane. They're calculated by the linked plane's wm code.
*/
u32 slave;
struct drm_intel_sprite_colorkey ckey;
};
struct intel_initial_plane_config {
struct intel_framebuffer *fb;
unsigned int tiling;
int size;
u32 base;
u8 rotation;
};
struct intel_scaler {
int in_use;
u32 mode;
};
struct intel_crtc_scaler_state {
#define SKL_NUM_SCALERS 2
struct intel_scaler scalers[SKL_NUM_SCALERS];
/*
* scaler_users: keeps track of users requesting scalers on this crtc.
*
* If a bit is set, a user is using a scaler.
* Here user can be a plane or crtc as defined below:
* bits 0-30 - plane (bit position is index from drm_plane_index)
* bit 31 - crtc
*
* Instead of creating a new index to cover planes and crtc, using
* existing drm_plane_index for planes which is well less than 31
* planes and bit 31 for crtc. This should be fine to cover all
* our platforms.
*
* intel_atomic_setup_scalers will setup available scalers to users
* requesting scalers. It will gracefully fail if request exceeds
* avilability.
*/
#define SKL_CRTC_INDEX 31
unsigned scaler_users;
/* scaler used by crtc for panel fitting purpose */
int scaler_id;
};
/* drm_mode->private_flags */
#define I915_MODE_FLAG_INHERITED (1<<0)
/* Flag to get scanline using frame time stamps */
#define I915_MODE_FLAG_GET_SCANLINE_FROM_TIMESTAMP (1<<1)
/* Flag to use the scanline counter instead of the pixel counter */
#define I915_MODE_FLAG_USE_SCANLINE_COUNTER (1<<2)
struct intel_pipe_wm {
struct intel_wm_level wm[5];
u32 linetime;
bool fbc_wm_enabled;
bool pipe_enabled;
bool sprites_enabled;
bool sprites_scaled;
};
struct skl_plane_wm {
struct skl_wm_level wm[8];
struct skl_wm_level uv_wm[8];
struct skl_wm_level trans_wm;
bool is_planar;
};
struct skl_pipe_wm {
struct skl_plane_wm planes[I915_MAX_PLANES];
u32 linetime;
};
enum vlv_wm_level {
VLV_WM_LEVEL_PM2,
VLV_WM_LEVEL_PM5,
VLV_WM_LEVEL_DDR_DVFS,
NUM_VLV_WM_LEVELS,
};
struct vlv_wm_state {
struct g4x_pipe_wm wm[NUM_VLV_WM_LEVELS];
struct g4x_sr_wm sr[NUM_VLV_WM_LEVELS];
u8 num_levels;
bool cxsr;
};
struct vlv_fifo_state {
u16 plane[I915_MAX_PLANES];
};
enum g4x_wm_level {
G4X_WM_LEVEL_NORMAL,
G4X_WM_LEVEL_SR,
G4X_WM_LEVEL_HPLL,
NUM_G4X_WM_LEVELS,
};
struct g4x_wm_state {
struct g4x_pipe_wm wm;
struct g4x_sr_wm sr;
struct g4x_sr_wm hpll;
bool cxsr;
bool hpll_en;
bool fbc_en;
};
struct intel_crtc_wm_state {
union {
struct {
/*
* Intermediate watermarks; these can be
* programmed immediately since they satisfy
* both the current configuration we're
* switching away from and the new
* configuration we're switching to.
*/
struct intel_pipe_wm intermediate;
/*
* Optimal watermarks, programmed post-vblank
* when this state is committed.
*/
struct intel_pipe_wm optimal;
} ilk;
struct {
/* gen9+ only needs 1-step wm programming */
struct skl_pipe_wm optimal;
struct skl_ddb_entry ddb;
struct skl_ddb_entry plane_ddb_y[I915_MAX_PLANES];
struct skl_ddb_entry plane_ddb_uv[I915_MAX_PLANES];
} skl;
struct {
/* "raw" watermarks (not inverted) */
struct g4x_pipe_wm raw[NUM_VLV_WM_LEVELS];
/* intermediate watermarks (inverted) */
struct vlv_wm_state intermediate;
/* optimal watermarks (inverted) */
struct vlv_wm_state optimal;
/* display FIFO split */
struct vlv_fifo_state fifo_state;
} vlv;
struct {
/* "raw" watermarks */
struct g4x_pipe_wm raw[NUM_G4X_WM_LEVELS];
/* intermediate watermarks */
struct g4x_wm_state intermediate;
/* optimal watermarks */
struct g4x_wm_state optimal;
} g4x;
};
/*
* Platforms with two-step watermark programming will need to
* update watermark programming post-vblank to switch from the
* safe intermediate watermarks to the optimal final
* watermarks.
*/
bool need_postvbl_update;
};
enum intel_output_format {
INTEL_OUTPUT_FORMAT_INVALID,
INTEL_OUTPUT_FORMAT_RGB,
INTEL_OUTPUT_FORMAT_YCBCR420,
INTEL_OUTPUT_FORMAT_YCBCR444,
};
struct intel_crtc_state {
struct drm_crtc_state base;
/**
* quirks - bitfield with hw state readout quirks
*
* For various reasons the hw state readout code might not be able to
* completely faithfully read out the current state. These cases are
* tracked with quirk flags so that fastboot and state checker can act
* accordingly.
*/
#define PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS (1<<0) /* unreliable sync mode.flags */
unsigned long quirks;
unsigned fb_bits; /* framebuffers to flip */
bool update_pipe; /* can a fast modeset be performed? */
bool disable_cxsr;
bool update_wm_pre, update_wm_post; /* watermarks are updated */
bool fb_changed; /* fb on any of the planes is changed */
bool fifo_changed; /* FIFO split is changed */
/* Pipe source size (ie. panel fitter input size)
* All planes will be positioned inside this space,
* and get clipped at the edges. */
int pipe_src_w, pipe_src_h;
/*
* Pipe pixel rate, adjusted for
* panel fitter/pipe scaler downscaling.
*/
unsigned int pixel_rate;
/* Whether to set up the PCH/FDI. Note that we never allow sharing
* between pch encoders and cpu encoders. */
bool has_pch_encoder;
/* Are we sending infoframes on the attached port */
bool has_infoframe;
/* CPU Transcoder for the pipe. Currently this can only differ from the
* pipe on Haswell and later (where we have a special eDP transcoder)
* and Broxton (where we have special DSI transcoders). */
enum transcoder cpu_transcoder;
/*
* Use reduced/limited/broadcast rbg range, compressing from the full
* range fed into the crtcs.
*/
bool limited_color_range;
/* Bitmask of encoder types (enum intel_output_type)
* driven by the pipe.
*/
unsigned int output_types;
/* Whether we should send NULL infoframes. Required for audio. */
bool has_hdmi_sink;
/* Audio enabled on this pipe. Only valid if either has_hdmi_sink or
* has_dp_encoder is set. */
bool has_audio;
/*
* Enable dithering, used when the selected pipe bpp doesn't match the
* plane bpp.
*/
bool dither;
/*
* Dither gets enabled for 18bpp which causes CRC mismatch errors for
* compliance video pattern tests.
* Disable dither only if it is a compliance test request for
* 18bpp.
*/
bool dither_force_disable;
/* Controls for the clock computation, to override various stages. */
bool clock_set;
/* SDVO TV has a bunch of special case. To make multifunction encoders
* work correctly, we need to track this at runtime.*/
bool sdvo_tv_clock;
/*
* crtc bandwidth limit, don't increase pipe bpp or clock if not really
* required. This is set in the 2nd loop of calling encoder's
* ->compute_config if the first pick doesn't work out.
*/
bool bw_constrained;
/* Settings for the intel dpll used on pretty much everything but
* haswell. */
struct dpll dpll;
/* Selected dpll when shared or NULL. */
struct intel_shared_dpll *shared_dpll;
/* Actual register state of the dpll, for shared dpll cross-checking. */
struct intel_dpll_hw_state dpll_hw_state;
/*
* ICL reserved DPLLs for the CRTC/port. The active PLL is selected by
* setting shared_dpll and dpll_hw_state to one of these reserved ones.
*/
struct icl_port_dpll {
struct intel_shared_dpll *pll;
struct intel_dpll_hw_state hw_state;
} icl_port_dplls[ICL_PORT_DPLL_COUNT];
/* DSI PLL registers */
struct {
u32 ctrl, div;
} dsi_pll;
int pipe_bpp;
struct intel_link_m_n dp_m_n;
/* m2_n2 for eDP downclock */
struct intel_link_m_n dp_m2_n2;
bool has_drrs;
bool has_psr;
bool has_psr2;
/*
* Frequence the dpll for the port should run at. Differs from the
* adjusted dotclock e.g. for DP or 12bpc hdmi mode. This is also
* already multiplied by pixel_multiplier.
*/
int port_clock;
/* Used by SDVO (and if we ever fix it, HDMI). */
unsigned pixel_multiplier;
u8 lane_count;
/*
* Used by platforms having DP/HDMI PHY with programmable lane
* latency optimization.
*/
u8 lane_lat_optim_mask;
/* minimum acceptable voltage level */
u8 min_voltage_level;
/* Panel fitter controls for gen2-gen4 + VLV */
struct {
u32 control;
u32 pgm_ratios;
u32 lvds_border_bits;
} gmch_pfit;
/* Panel fitter placement and size for Ironlake+ */
struct {
u32 pos;
u32 size;
bool enabled;
bool force_thru;
} pch_pfit;
/* FDI configuration, only valid if has_pch_encoder is set. */
int fdi_lanes;
struct intel_link_m_n fdi_m_n;
bool ips_enabled;
bool crc_enabled;
bool enable_fbc;
bool double_wide;
int pbn;
struct intel_crtc_scaler_state scaler_state;
/* w/a for waiting 2 vblanks during crtc enable */
enum pipe hsw_workaround_pipe;
/* IVB sprite scaling w/a (WaCxSRDisabledForSpriteScaling:ivb) */
bool disable_lp_wm;
struct intel_crtc_wm_state wm;
u32 data_rate[I915_MAX_PLANES];
/* Gamma mode programmed on the pipe */
u32 gamma_mode;
union {
/* CSC mode programmed on the pipe */
u32 csc_mode;
/* CHV CGM mode */
u32 cgm_mode;
};
/* bitmask of visible planes (enum plane_id) */
u8 active_planes;
u8 nv12_planes;
u8 c8_planes;
/* bitmask of planes that will be updated during the commit */
u8 update_planes;
struct {
u32 enable;
u32 gcp;
union hdmi_infoframe avi;
union hdmi_infoframe spd;
union hdmi_infoframe hdmi;
union hdmi_infoframe drm;
} infoframes;
/* HDMI scrambling status */
bool hdmi_scrambling;
/* HDMI High TMDS char rate ratio */
bool hdmi_high_tmds_clock_ratio;
/* Output format RGB/YCBCR etc */
enum intel_output_format output_format;
/* Output down scaling is done in LSPCON device */
bool lspcon_downsampling;
/* enable pipe gamma? */
bool gamma_enable;
/* enable pipe csc? */
bool csc_enable;
/* Display Stream compression state */
struct {
bool compression_enable;
bool dsc_split;
u16 compressed_bpp;
u8 slice_count;
} dsc_params;
struct drm_dsc_config dp_dsc_cfg;
/* Forward Error correction State */
bool fec_enable;
};
struct intel_crtc {
struct drm_crtc base;
enum pipe pipe;
/*
* Whether the crtc and the connected output pipeline is active. Implies
* that crtc->enabled is set, i.e. the current mode configuration has
* some outputs connected to this crtc.
*/
bool active;
u8 plane_ids_mask;
unsigned long long enabled_power_domains;
struct intel_overlay *overlay;
struct intel_crtc_state *config;
/* Access to these should be protected by dev_priv->irq_lock. */
bool cpu_fifo_underrun_disabled;
bool pch_fifo_underrun_disabled;
/* per-pipe watermark state */
struct {
/* watermarks currently being used */
union {
struct intel_pipe_wm ilk;
struct vlv_wm_state vlv;
struct g4x_wm_state g4x;
} active;
} wm;
int scanline_offset;
struct {
unsigned start_vbl_count;
ktime_t start_vbl_time;
int min_vbl, max_vbl;
int scanline_start;
} debug;
/* scalers available on this crtc */
int num_scalers;
};
struct intel_plane {
struct drm_plane base;
enum i9xx_plane_id i9xx_plane;
enum plane_id id;
enum pipe pipe;
bool has_fbc;
bool has_ccs;
u32 frontbuffer_bit;
struct {
u32 base, cntl, size;
} cursor;
/*
* NOTE: Do not place new plane state fields here (e.g., when adding
* new plane properties). New runtime state should now be placed in
* the intel_plane_state structure and accessed via plane_state.
*/
unsigned int (*max_stride)(struct intel_plane *plane,
u32 pixel_format, u64 modifier,
unsigned int rotation);
void (*update_plane)(struct intel_plane *plane,
const struct intel_crtc_state *crtc_state,
const struct intel_plane_state *plane_state);
void (*update_slave)(struct intel_plane *plane,
const struct intel_crtc_state *crtc_state,
const struct intel_plane_state *plane_state);
void (*disable_plane)(struct intel_plane *plane,
const struct intel_crtc_state *crtc_state);
bool (*get_hw_state)(struct intel_plane *plane, enum pipe *pipe);
int (*check_plane)(struct intel_crtc_state *crtc_state,
struct intel_plane_state *plane_state);
};
struct intel_watermark_params {
u16 fifo_size;
u16 max_wm;
u8 default_wm;
u8 guard_size;
u8 cacheline_size;
};
struct cxsr_latency {
bool is_desktop : 1;
bool is_ddr3 : 1;
u16 fsb_freq;
u16 mem_freq;
u16 display_sr;
u16 display_hpll_disable;
u16 cursor_sr;
u16 cursor_hpll_disable;
};
#define to_intel_atomic_state(x) container_of(x, struct intel_atomic_state, base)
#define to_intel_crtc(x) container_of(x, struct intel_crtc, base)
#define to_intel_crtc_state(x) container_of(x, struct intel_crtc_state, base)
#define to_intel_connector(x) container_of(x, struct intel_connector, base)
#define to_intel_encoder(x) container_of(x, struct intel_encoder, base)
#define to_intel_framebuffer(x) container_of(x, struct intel_framebuffer, base)
#define to_intel_plane(x) container_of(x, struct intel_plane, base)
#define to_intel_plane_state(x) container_of(x, struct intel_plane_state, base)
#define intel_fb_obj(x) ((x) ? to_intel_bo((x)->obj[0]) : NULL)
struct intel_hdmi {
i915_reg_t hdmi_reg;
int ddc_bus;
struct {
enum drm_dp_dual_mode_type type;
int max_tmds_clock;
} dp_dual_mode;
bool has_hdmi_sink;
bool has_audio;
struct intel_connector *attached_connector;
struct cec_notifier *cec_notifier;
};
struct intel_dp_mst_encoder;
#define DP_MAX_DOWNSTREAM_PORTS 0x10
/*
* enum link_m_n_set:
* When platform provides two set of M_N registers for dp, we can
* program them and switch between them incase of DRRS.
* But When only one such register is provided, we have to program the
* required divider value on that registers itself based on the DRRS state.
*
* M1_N1 : Program dp_m_n on M1_N1 registers
* dp_m2_n2 on M2_N2 registers (If supported)
*
* M2_N2 : Program dp_m2_n2 on M1_N1 registers
* M2_N2 registers are not supported
*/
enum link_m_n_set {
/* Sets the m1_n1 and m2_n2 */
M1_N1 = 0,
M2_N2
};
struct intel_dp_compliance_data {
unsigned long edid;
u8 video_pattern;
u16 hdisplay, vdisplay;
u8 bpc;
};
struct intel_dp_compliance {
unsigned long test_type;
struct intel_dp_compliance_data test_data;
bool test_active;
int test_link_rate;
u8 test_lane_count;
};
struct intel_dp {
i915_reg_t output_reg;
u32 DP;
int link_rate;
u8 lane_count;
u8 sink_count;
bool link_mst;
bool link_trained;
bool has_audio;
bool reset_link_params;
u8 dpcd[DP_RECEIVER_CAP_SIZE];
u8 psr_dpcd[EDP_PSR_RECEIVER_CAP_SIZE];
u8 downstream_ports[DP_MAX_DOWNSTREAM_PORTS];
u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE];
u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE];
u8 fec_capable;
/* source rates */
int num_source_rates;
const int *source_rates;
/* sink rates as reported by DP_MAX_LINK_RATE/DP_SUPPORTED_LINK_RATES */
int num_sink_rates;
int sink_rates[DP_MAX_SUPPORTED_RATES];
bool use_rate_select;
/* intersection of source and sink rates */
int num_common_rates;
int common_rates[DP_MAX_SUPPORTED_RATES];
/* Max lane count for the current link */
int max_link_lane_count;
/* Max rate for the current link */
int max_link_rate;
/* sink or branch descriptor */
struct drm_dp_desc desc;
struct drm_dp_aux aux;
u8 train_set[4];
int panel_power_up_delay;
int panel_power_down_delay;
int panel_power_cycle_delay;
int backlight_on_delay;
int backlight_off_delay;
struct delayed_work panel_vdd_work;
bool want_panel_vdd;
unsigned long last_power_on;
unsigned long last_backlight_off;
ktime_t panel_power_off_time;
struct notifier_block edp_notifier;
/*
* Pipe whose power sequencer is currently locked into
* this port. Only relevant on VLV/CHV.
*/
enum pipe pps_pipe;
/*
* Pipe currently driving the port. Used for preventing
* the use of the PPS for any pipe currentrly driving
* external DP as that will mess things up on VLV.
*/
enum pipe active_pipe;
/*
* Set if the sequencer may be reset due to a power transition,
* requiring a reinitialization. Only relevant on BXT.
*/
bool pps_reset;
struct edp_power_seq pps_delays;
bool can_mst; /* this port supports mst */
bool is_mst;
int active_mst_links;
/* connector directly attached - won't be use for modeset in mst world */
struct intel_connector *attached_connector;
/* mst connector list */
struct intel_dp_mst_encoder *mst_encoders[I915_MAX_PIPES];
struct drm_dp_mst_topology_mgr mst_mgr;
u32 (*get_aux_clock_divider)(struct intel_dp *dp, int index);
/*
* This function returns the value we have to program the AUX_CTL
* register with to kick off an AUX transaction.
*/
u32 (*get_aux_send_ctl)(struct intel_dp *dp, int send_bytes,
u32 aux_clock_divider);
i915_reg_t (*aux_ch_ctl_reg)(struct intel_dp *dp);
i915_reg_t (*aux_ch_data_reg)(struct intel_dp *dp, int index);
/* This is called before a link training is starterd */
void (*prepare_link_retrain)(struct intel_dp *intel_dp);
/* Displayport compliance testing */
struct intel_dp_compliance compliance;
/* Display stream compression testing */
bool force_dsc_en;
};
enum lspcon_vendor {
LSPCON_VENDOR_MCA,
LSPCON_VENDOR_PARADE
};
struct intel_lspcon {
bool active;
enum drm_lspcon_mode mode;
enum lspcon_vendor vendor;
};
struct intel_digital_port {
struct intel_encoder base;
u32 saved_port_bits;
struct intel_dp dp;
struct intel_hdmi hdmi;
struct intel_lspcon lspcon;
enum irqreturn (*hpd_pulse)(struct intel_digital_port *, bool);
bool release_cl2_override;
u8 max_lanes;
/* Used for DP and ICL+ TypeC/DP and TypeC/HDMI ports. */
enum aux_ch aux_ch;
enum intel_display_power_domain ddi_io_power_domain;
struct mutex tc_lock; /* protects the TypeC port mode */
intel_wakeref_t tc_lock_wakeref;
int tc_link_refcount;
bool tc_legacy_port:1;
char tc_port_name[8];
enum tc_port_mode tc_mode;
enum phy_fia tc_phy_fia;
void (*write_infoframe)(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state,
unsigned int type,
const void *frame, ssize_t len);
void (*read_infoframe)(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state,
unsigned int type,
void *frame, ssize_t len);
void (*set_infoframes)(struct intel_encoder *encoder,
bool enable,
const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state);
u32 (*infoframes_enabled)(struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config);
};
struct intel_dp_mst_encoder {
struct intel_encoder base;
enum pipe pipe;
struct intel_digital_port *primary;
struct intel_connector *connector;
};
static inline enum dpio_channel
vlv_dport_to_channel(struct intel_digital_port *dport)
{
switch (dport->base.port) {
case PORT_B:
case PORT_D:
return DPIO_CH0;
case PORT_C:
return DPIO_CH1;
default:
BUG();
}
}
static inline enum dpio_phy
vlv_dport_to_phy(struct intel_digital_port *dport)
{
switch (dport->base.port) {
case PORT_B:
case PORT_C:
return DPIO_PHY0;
case PORT_D:
return DPIO_PHY1;
default:
BUG();
}
}
static inline enum dpio_channel
vlv_pipe_to_channel(enum pipe pipe)
{
switch (pipe) {
case PIPE_A:
case PIPE_C:
return DPIO_CH0;
case PIPE_B:
return DPIO_CH1;
default:
BUG();
}
}
static inline struct intel_crtc *
intel_get_crtc_for_pipe(struct drm_i915_private *dev_priv, enum pipe pipe)
{
return dev_priv->pipe_to_crtc_mapping[pipe];
}
static inline struct intel_crtc *
intel_get_crtc_for_plane(struct drm_i915_private *dev_priv, enum i9xx_plane_id plane)
{
return dev_priv->plane_to_crtc_mapping[plane];
}
struct intel_load_detect_pipe {
struct drm_atomic_state *restore_state;
};
static inline struct intel_encoder *
intel_attached_encoder(struct drm_connector *connector)
{
return to_intel_connector(connector)->encoder;
}
static inline bool intel_encoder_is_dig_port(struct intel_encoder *encoder)
{
switch (encoder->type) {
case INTEL_OUTPUT_DDI:
case INTEL_OUTPUT_DP:
case INTEL_OUTPUT_EDP:
case INTEL_OUTPUT_HDMI:
return true;
default:
return false;
}
}
static inline struct intel_digital_port *
enc_to_dig_port(struct drm_encoder *encoder)
{
struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
if (intel_encoder_is_dig_port(intel_encoder))
return container_of(encoder, struct intel_digital_port,
base.base);
else
return NULL;
}
static inline struct intel_digital_port *
conn_to_dig_port(struct intel_connector *connector)
{
return enc_to_dig_port(&intel_attached_encoder(&connector->base)->base);
}
static inline struct intel_dp_mst_encoder *
enc_to_mst(struct drm_encoder *encoder)
{
return container_of(encoder, struct intel_dp_mst_encoder, base.base);
}
static inline struct intel_dp *enc_to_intel_dp(struct drm_encoder *encoder)
{
return &enc_to_dig_port(encoder)->dp;
}
static inline bool intel_encoder_is_dp(struct intel_encoder *encoder)
{
switch (encoder->type) {
case INTEL_OUTPUT_DP:
case INTEL_OUTPUT_EDP:
return true;
case INTEL_OUTPUT_DDI:
/* Skip pure HDMI/DVI DDI encoders */
return i915_mmio_reg_valid(enc_to_intel_dp(&encoder->base)->output_reg);
default:
return false;
}
}
static inline struct intel_lspcon *
enc_to_intel_lspcon(struct drm_encoder *encoder)
{
return &enc_to_dig_port(encoder)->lspcon;
}
static inline struct intel_digital_port *
dp_to_dig_port(struct intel_dp *intel_dp)
{
return container_of(intel_dp, struct intel_digital_port, dp);
}
static inline struct intel_lspcon *
dp_to_lspcon(struct intel_dp *intel_dp)
{
return &dp_to_dig_port(intel_dp)->lspcon;
}
static inline struct drm_i915_private *
dp_to_i915(struct intel_dp *intel_dp)
{
return to_i915(dp_to_dig_port(intel_dp)->base.base.dev);
}
static inline struct intel_digital_port *
hdmi_to_dig_port(struct intel_hdmi *intel_hdmi)
{
return container_of(intel_hdmi, struct intel_digital_port, hdmi);
}
static inline struct intel_plane_state *
intel_atomic_get_plane_state(struct intel_atomic_state *state,
struct intel_plane *plane)
{
struct drm_plane_state *ret =
drm_atomic_get_plane_state(&state->base, &plane->base);
if (IS_ERR(ret))
return ERR_CAST(ret);
return to_intel_plane_state(ret);
}
static inline struct intel_plane_state *
intel_atomic_get_old_plane_state(struct intel_atomic_state *state,
struct intel_plane *plane)
{
return to_intel_plane_state(drm_atomic_get_old_plane_state(&state->base,
&plane->base));
}
static inline struct intel_plane_state *
intel_atomic_get_new_plane_state(struct intel_atomic_state *state,
struct intel_plane *plane)
{
return to_intel_plane_state(drm_atomic_get_new_plane_state(&state->base,
&plane->base));
}
static inline struct intel_crtc_state *
intel_atomic_get_old_crtc_state(struct intel_atomic_state *state,
struct intel_crtc *crtc)
{
return to_intel_crtc_state(drm_atomic_get_old_crtc_state(&state->base,
&crtc->base));
}
static inline struct intel_crtc_state *
intel_atomic_get_new_crtc_state(struct intel_atomic_state *state,
struct intel_crtc *crtc)
{
return to_intel_crtc_state(drm_atomic_get_new_crtc_state(&state->base,
&crtc->base));
}
/* intel_display.c */
void intel_plane_destroy(struct drm_plane *plane);
void i830_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe);
void i830_disable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe);
enum pipe intel_crtc_pch_transcoder(struct intel_crtc *crtc);
int vlv_get_hpll_vco(struct drm_i915_private *dev_priv);
int vlv_get_cck_clock(struct drm_i915_private *dev_priv,
const char *name, u32 reg, int ref_freq);
int vlv_get_cck_clock_hpll(struct drm_i915_private *dev_priv,
const char *name, u32 reg);
void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv);
void lpt_disable_iclkip(struct drm_i915_private *dev_priv);
void intel_init_display_hooks(struct drm_i915_private *dev_priv);
unsigned int intel_fb_xy_to_linear(int x, int y,
const struct intel_plane_state *state,
int plane);
unsigned int intel_fb_align_height(const struct drm_framebuffer *fb,
int color_plane, unsigned int height);
void intel_add_fb_offsets(int *x, int *y,
const struct intel_plane_state *state, int plane);
unsigned int intel_rotation_info_size(const struct intel_rotation_info *rot_info);
unsigned int intel_remapped_info_size(const struct intel_remapped_info *rem_info);
bool intel_has_pending_fb_unpin(struct drm_i915_private *dev_priv);
int intel_display_suspend(struct drm_device *dev);
void intel_pps_unlock_regs_wa(struct drm_i915_private *dev_priv);
void intel_encoder_destroy(struct drm_encoder *encoder);
struct drm_display_mode *
intel_encoder_current_mode(struct intel_encoder *encoder);
bool intel_phy_is_combo(struct drm_i915_private *dev_priv, enum phy phy);
bool intel_phy_is_tc(struct drm_i915_private *dev_priv, enum phy phy);
enum tc_port intel_port_to_tc(struct drm_i915_private *dev_priv,
enum port port);
int intel_get_pipe_from_crtc_id_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv,
enum pipe pipe);
static inline bool
intel_crtc_has_type(const struct intel_crtc_state *crtc_state,
enum intel_output_type type)
{
return crtc_state->output_types & (1 << type);
}
static inline bool
intel_crtc_has_dp_encoder(const struct intel_crtc_state *crtc_state)
{
return crtc_state->output_types &
((1 << INTEL_OUTPUT_DP) |
(1 << INTEL_OUTPUT_DP_MST) |
(1 << INTEL_OUTPUT_EDP));
}
static inline void
intel_wait_for_vblank(struct drm_i915_private *dev_priv, enum pipe pipe)
{
drm_wait_one_vblank(&dev_priv->drm, pipe);
}
static inline void
intel_wait_for_vblank_if_active(struct drm_i915_private *dev_priv, int pipe)
{
const struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
if (crtc->active)
intel_wait_for_vblank(dev_priv, pipe);
}
u32 intel_crtc_get_vblank_counter(struct intel_crtc *crtc);
int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp);
void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
struct intel_digital_port *dport,
unsigned int expected_mask);
int intel_get_load_detect_pipe(struct drm_connector *connector,
const struct drm_display_mode *mode,
struct intel_load_detect_pipe *old,
struct drm_modeset_acquire_ctx *ctx);
void intel_release_load_detect_pipe(struct drm_connector *connector,
struct intel_load_detect_pipe *old,
struct drm_modeset_acquire_ctx *ctx);
struct i915_vma *
intel_pin_and_fence_fb_obj(struct drm_framebuffer *fb,
const struct i915_ggtt_view *view,
bool uses_fence,
unsigned long *out_flags);
void intel_unpin_fb_vma(struct i915_vma *vma, unsigned long flags);
struct drm_framebuffer *
intel_framebuffer_create(struct drm_i915_gem_object *obj,
struct drm_mode_fb_cmd2 *mode_cmd);
int intel_prepare_plane_fb(struct drm_plane *plane,
struct drm_plane_state *new_state);
void intel_cleanup_plane_fb(struct drm_plane *plane,
struct drm_plane_state *old_state);
void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
enum pipe pipe);
int vlv_force_pll_on(struct drm_i915_private *dev_priv, enum pipe pipe,
const struct dpll *dpll);
void vlv_force_pll_off(struct drm_i915_private *dev_priv, enum pipe pipe);
int lpt_get_iclkip(struct drm_i915_private *dev_priv);
bool intel_fuzzy_clock_check(int clock1, int clock2);
/* modesetting asserts */
void assert_panel_unlocked(struct drm_i915_private *dev_priv,
enum pipe pipe);
void assert_pll(struct drm_i915_private *dev_priv,
enum pipe pipe, bool state);
#define assert_pll_enabled(d, p) assert_pll(d, p, true)
#define assert_pll_disabled(d, p) assert_pll(d, p, false)
void assert_dsi_pll(struct drm_i915_private *dev_priv, bool state);
#define assert_dsi_pll_enabled(d) assert_dsi_pll(d, true)
#define assert_dsi_pll_disabled(d) assert_dsi_pll(d, false)
void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
enum pipe pipe, bool state);
#define assert_fdi_rx_pll_enabled(d, p) assert_fdi_rx_pll(d, p, true)
#define assert_fdi_rx_pll_disabled(d, p) assert_fdi_rx_pll(d, p, false)
void assert_pipe(struct drm_i915_private *dev_priv, enum pipe pipe, bool state);
#define assert_pipe_enabled(d, p) assert_pipe(d, p, true)
#define assert_pipe_disabled(d, p) assert_pipe(d, p, false)
void intel_prepare_reset(struct drm_i915_private *dev_priv);
void intel_finish_reset(struct drm_i915_private *dev_priv);
void intel_dp_get_m_n(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config);
void intel_dp_set_m_n(const struct intel_crtc_state *crtc_state,
enum link_m_n_set m_n);
void intel_dp_ycbcr_420_enable(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state);
int intel_dotclock_calculate(int link_freq, const struct intel_link_m_n *m_n);
bool bxt_find_best_dpll(struct intel_crtc_state *crtc_state,
struct dpll *best_clock);
int chv_calc_dpll_params(int refclk, struct dpll *pll_clock);
bool intel_crtc_active(struct intel_crtc *crtc);
bool hsw_crtc_state_ips_capable(const struct intel_crtc_state *crtc_state);
void hsw_enable_ips(const struct intel_crtc_state *crtc_state);
void hsw_disable_ips(const struct intel_crtc_state *crtc_state);
enum intel_display_power_domain intel_port_to_power_domain(enum port port);
enum intel_display_power_domain
intel_aux_power_domain(struct intel_digital_port *dig_port);
void intel_mode_from_pipe_config(struct drm_display_mode *mode,
struct intel_crtc_state *pipe_config);
void intel_crtc_arm_fifo_underrun(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state);
u16 skl_scaler_calc_phase(int sub, int scale, bool chroma_center);
int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state);
int skl_max_scale(const struct intel_crtc_state *crtc_state,
u32 pixel_format);
static inline u32 intel_plane_ggtt_offset(const struct intel_plane_state *state)
{
return i915_ggtt_offset(state->vma);
}
u32 glk_plane_color_ctl(const struct intel_crtc_state *crtc_state,
const struct intel_plane_state *plane_state);
u32 glk_plane_color_ctl_crtc(const struct intel_crtc_state *crtc_state);
u32 skl_plane_ctl(const struct intel_crtc_state *crtc_state,
const struct intel_plane_state *plane_state);
u32 skl_plane_ctl_crtc(const struct intel_crtc_state *crtc_state);
u32 skl_plane_stride(const struct intel_plane_state *plane_state,
int plane);
int skl_check_plane_surface(struct intel_plane_state *plane_state);
int i9xx_check_plane_surface(struct intel_plane_state *plane_state);
int skl_format_to_fourcc(int format, bool rgb_order, bool alpha);
unsigned int i9xx_plane_max_stride(struct intel_plane *plane,
u32 pixel_format, u64 modifier,
unsigned int rotation);
int bdw_get_pipemisc_bpp(struct intel_crtc *crtc);
#endif /* __INTEL_DRV_H__ */