1620 lines
37 KiB
C
1620 lines
37 KiB
C
/*
|
|
* Atmel maXTouch Touchscreen driver
|
|
*
|
|
* Copyright (C) 2010 Samsung Electronics Co.Ltd
|
|
* Copyright (C) 2012 Google, Inc.
|
|
*
|
|
* Author: Joonyoung Shim <jy0922.shim@samsung.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c/atmel_mxt_ts.h>
|
|
#include <linux/input/mt.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* Version */
|
|
#define MXT_VER_20 20
|
|
#define MXT_VER_21 21
|
|
#define MXT_VER_22 22
|
|
|
|
/* Firmware */
|
|
#define MXT_FW_NAME "maxtouch.fw"
|
|
|
|
/* Registers */
|
|
#define MXT_INFO 0x00
|
|
#define MXT_FAMILY_ID 0x00
|
|
#define MXT_VARIANT_ID 0x01
|
|
#define MXT_VERSION 0x02
|
|
#define MXT_BUILD 0x03
|
|
#define MXT_MATRIX_X_SIZE 0x04
|
|
#define MXT_MATRIX_Y_SIZE 0x05
|
|
#define MXT_OBJECT_NUM 0x06
|
|
#define MXT_OBJECT_START 0x07
|
|
|
|
#define MXT_OBJECT_SIZE 6
|
|
|
|
/* Object types */
|
|
#define MXT_DEBUG_DIAGNOSTIC_T37 37
|
|
#define MXT_GEN_MESSAGE_T5 5
|
|
#define MXT_GEN_COMMAND_T6 6
|
|
#define MXT_GEN_POWER_T7 7
|
|
#define MXT_GEN_ACQUIRE_T8 8
|
|
#define MXT_GEN_DATASOURCE_T53 53
|
|
#define MXT_TOUCH_MULTI_T9 9
|
|
#define MXT_TOUCH_KEYARRAY_T15 15
|
|
#define MXT_TOUCH_PROXIMITY_T23 23
|
|
#define MXT_TOUCH_PROXKEY_T52 52
|
|
#define MXT_PROCI_GRIPFACE_T20 20
|
|
#define MXT_PROCG_NOISE_T22 22
|
|
#define MXT_PROCI_ONETOUCH_T24 24
|
|
#define MXT_PROCI_TWOTOUCH_T27 27
|
|
#define MXT_PROCI_GRIP_T40 40
|
|
#define MXT_PROCI_PALM_T41 41
|
|
#define MXT_PROCI_TOUCHSUPPRESSION_T42 42
|
|
#define MXT_PROCI_STYLUS_T47 47
|
|
#define MXT_PROCG_NOISESUPPRESSION_T48 48
|
|
#define MXT_SPT_COMMSCONFIG_T18 18
|
|
#define MXT_SPT_GPIOPWM_T19 19
|
|
#define MXT_SPT_SELFTEST_T25 25
|
|
#define MXT_SPT_CTECONFIG_T28 28
|
|
#define MXT_SPT_USERDATA_T38 38
|
|
#define MXT_SPT_DIGITIZER_T43 43
|
|
#define MXT_SPT_MESSAGECOUNT_T44 44
|
|
#define MXT_SPT_CTECONFIG_T46 46
|
|
|
|
/* MXT_GEN_COMMAND_T6 field */
|
|
#define MXT_COMMAND_RESET 0
|
|
#define MXT_COMMAND_BACKUPNV 1
|
|
#define MXT_COMMAND_CALIBRATE 2
|
|
#define MXT_COMMAND_REPORTALL 3
|
|
#define MXT_COMMAND_DIAGNOSTIC 5
|
|
|
|
/* Define for T6 status byte */
|
|
#define MXT_T6_STATUS_RESET (1 << 7)
|
|
|
|
/* MXT_GEN_POWER_T7 field */
|
|
#define MXT_POWER_IDLEACQINT 0
|
|
#define MXT_POWER_ACTVACQINT 1
|
|
#define MXT_POWER_ACTV2IDLETO 2
|
|
|
|
/* MXT_GEN_ACQUIRE_T8 field */
|
|
#define MXT_ACQUIRE_CHRGTIME 0
|
|
#define MXT_ACQUIRE_TCHDRIFT 2
|
|
#define MXT_ACQUIRE_DRIFTST 3
|
|
#define MXT_ACQUIRE_TCHAUTOCAL 4
|
|
#define MXT_ACQUIRE_SYNC 5
|
|
#define MXT_ACQUIRE_ATCHCALST 6
|
|
#define MXT_ACQUIRE_ATCHCALSTHR 7
|
|
|
|
/* MXT_TOUCH_MULTI_T9 field */
|
|
#define MXT_TOUCH_CTRL 0
|
|
#define MXT_T9_ORIENT 9
|
|
#define MXT_T9_RANGE 18
|
|
|
|
/* MXT_TOUCH_MULTI_T9 status */
|
|
#define MXT_T9_UNGRIP (1 << 0)
|
|
#define MXT_T9_SUPPRESS (1 << 1)
|
|
#define MXT_T9_AMP (1 << 2)
|
|
#define MXT_T9_VECTOR (1 << 3)
|
|
#define MXT_T9_MOVE (1 << 4)
|
|
#define MXT_T9_RELEASE (1 << 5)
|
|
#define MXT_T9_PRESS (1 << 6)
|
|
#define MXT_T9_DETECT (1 << 7)
|
|
|
|
struct t9_range {
|
|
u16 x;
|
|
u16 y;
|
|
} __packed;
|
|
|
|
/* MXT_TOUCH_MULTI_T9 orient */
|
|
#define MXT_T9_ORIENT_SWITCH (1 << 0)
|
|
|
|
/* MXT_PROCI_GRIPFACE_T20 field */
|
|
#define MXT_GRIPFACE_CTRL 0
|
|
#define MXT_GRIPFACE_XLOGRIP 1
|
|
#define MXT_GRIPFACE_XHIGRIP 2
|
|
#define MXT_GRIPFACE_YLOGRIP 3
|
|
#define MXT_GRIPFACE_YHIGRIP 4
|
|
#define MXT_GRIPFACE_MAXTCHS 5
|
|
#define MXT_GRIPFACE_SZTHR1 7
|
|
#define MXT_GRIPFACE_SZTHR2 8
|
|
#define MXT_GRIPFACE_SHPTHR1 9
|
|
#define MXT_GRIPFACE_SHPTHR2 10
|
|
#define MXT_GRIPFACE_SUPEXTTO 11
|
|
|
|
/* MXT_PROCI_NOISE field */
|
|
#define MXT_NOISE_CTRL 0
|
|
#define MXT_NOISE_OUTFLEN 1
|
|
#define MXT_NOISE_GCAFUL_LSB 3
|
|
#define MXT_NOISE_GCAFUL_MSB 4
|
|
#define MXT_NOISE_GCAFLL_LSB 5
|
|
#define MXT_NOISE_GCAFLL_MSB 6
|
|
#define MXT_NOISE_ACTVGCAFVALID 7
|
|
#define MXT_NOISE_NOISETHR 8
|
|
#define MXT_NOISE_FREQHOPSCALE 10
|
|
#define MXT_NOISE_FREQ0 11
|
|
#define MXT_NOISE_FREQ1 12
|
|
#define MXT_NOISE_FREQ2 13
|
|
#define MXT_NOISE_FREQ3 14
|
|
#define MXT_NOISE_FREQ4 15
|
|
#define MXT_NOISE_IDLEGCAFVALID 16
|
|
|
|
/* MXT_SPT_COMMSCONFIG_T18 */
|
|
#define MXT_COMMS_CTRL 0
|
|
#define MXT_COMMS_CMD 1
|
|
|
|
/* MXT_SPT_CTECONFIG_T28 field */
|
|
#define MXT_CTE_CTRL 0
|
|
#define MXT_CTE_CMD 1
|
|
#define MXT_CTE_MODE 2
|
|
#define MXT_CTE_IDLEGCAFDEPTH 3
|
|
#define MXT_CTE_ACTVGCAFDEPTH 4
|
|
#define MXT_CTE_VOLTAGE 5
|
|
|
|
#define MXT_VOLTAGE_DEFAULT 2700000
|
|
#define MXT_VOLTAGE_STEP 10000
|
|
|
|
/* Define for MXT_GEN_COMMAND_T6 */
|
|
#define MXT_BOOT_VALUE 0xa5
|
|
#define MXT_RESET_VALUE 0x01
|
|
#define MXT_BACKUP_VALUE 0x55
|
|
|
|
/* Delay times */
|
|
#define MXT_BACKUP_TIME 50 /* msec */
|
|
#define MXT_RESET_TIME 200 /* msec */
|
|
#define MXT_RESET_TIMEOUT 3000 /* msec */
|
|
#define MXT_CRC_TIMEOUT 1000 /* msec */
|
|
#define MXT_FW_RESET_TIME 3000 /* msec */
|
|
#define MXT_FW_CHG_TIMEOUT 300 /* msec */
|
|
|
|
/* Command to unlock bootloader */
|
|
#define MXT_UNLOCK_CMD_MSB 0xaa
|
|
#define MXT_UNLOCK_CMD_LSB 0xdc
|
|
|
|
/* Bootloader mode status */
|
|
#define MXT_WAITING_BOOTLOAD_CMD 0xc0 /* valid 7 6 bit only */
|
|
#define MXT_WAITING_FRAME_DATA 0x80 /* valid 7 6 bit only */
|
|
#define MXT_FRAME_CRC_CHECK 0x02
|
|
#define MXT_FRAME_CRC_FAIL 0x03
|
|
#define MXT_FRAME_CRC_PASS 0x04
|
|
#define MXT_APP_CRC_FAIL 0x40 /* valid 7 8 bit only */
|
|
#define MXT_BOOT_STATUS_MASK 0x3f
|
|
#define MXT_BOOT_EXTENDED_ID (1 << 5)
|
|
#define MXT_BOOT_ID_MASK 0x1f
|
|
|
|
/* Touchscreen absolute values */
|
|
#define MXT_MAX_AREA 0xff
|
|
|
|
#define MXT_PIXELS_PER_MM 20
|
|
|
|
struct mxt_info {
|
|
u8 family_id;
|
|
u8 variant_id;
|
|
u8 version;
|
|
u8 build;
|
|
u8 matrix_xsize;
|
|
u8 matrix_ysize;
|
|
u8 object_num;
|
|
};
|
|
|
|
struct mxt_object {
|
|
u8 type;
|
|
u16 start_address;
|
|
u8 size_minus_one;
|
|
u8 instances_minus_one;
|
|
u8 num_report_ids;
|
|
} __packed;
|
|
|
|
struct mxt_message {
|
|
u8 reportid;
|
|
u8 message[7];
|
|
};
|
|
|
|
/* Each client has this additional data */
|
|
struct mxt_data {
|
|
struct i2c_client *client;
|
|
struct input_dev *input_dev;
|
|
char phys[64]; /* device physical location */
|
|
const struct mxt_platform_data *pdata;
|
|
struct mxt_object *object_table;
|
|
struct mxt_info info;
|
|
unsigned int irq;
|
|
unsigned int max_x;
|
|
unsigned int max_y;
|
|
bool in_bootloader;
|
|
u32 config_crc;
|
|
u8 bootloader_addr;
|
|
|
|
/* Cached parameters from object table */
|
|
u8 T6_reportid;
|
|
u16 T6_address;
|
|
u8 T9_reportid_min;
|
|
u8 T9_reportid_max;
|
|
u8 T19_reportid;
|
|
|
|
/* for fw update in bootloader */
|
|
struct completion bl_completion;
|
|
|
|
/* for reset handling */
|
|
struct completion reset_completion;
|
|
|
|
/* for config update handling */
|
|
struct completion crc_completion;
|
|
};
|
|
|
|
static size_t mxt_obj_size(const struct mxt_object *obj)
|
|
{
|
|
return obj->size_minus_one + 1;
|
|
}
|
|
|
|
static size_t mxt_obj_instances(const struct mxt_object *obj)
|
|
{
|
|
return obj->instances_minus_one + 1;
|
|
}
|
|
|
|
static bool mxt_object_readable(unsigned int type)
|
|
{
|
|
switch (type) {
|
|
case MXT_GEN_COMMAND_T6:
|
|
case MXT_GEN_POWER_T7:
|
|
case MXT_GEN_ACQUIRE_T8:
|
|
case MXT_GEN_DATASOURCE_T53:
|
|
case MXT_TOUCH_MULTI_T9:
|
|
case MXT_TOUCH_KEYARRAY_T15:
|
|
case MXT_TOUCH_PROXIMITY_T23:
|
|
case MXT_TOUCH_PROXKEY_T52:
|
|
case MXT_PROCI_GRIPFACE_T20:
|
|
case MXT_PROCG_NOISE_T22:
|
|
case MXT_PROCI_ONETOUCH_T24:
|
|
case MXT_PROCI_TWOTOUCH_T27:
|
|
case MXT_PROCI_GRIP_T40:
|
|
case MXT_PROCI_PALM_T41:
|
|
case MXT_PROCI_TOUCHSUPPRESSION_T42:
|
|
case MXT_PROCI_STYLUS_T47:
|
|
case MXT_PROCG_NOISESUPPRESSION_T48:
|
|
case MXT_SPT_COMMSCONFIG_T18:
|
|
case MXT_SPT_GPIOPWM_T19:
|
|
case MXT_SPT_SELFTEST_T25:
|
|
case MXT_SPT_CTECONFIG_T28:
|
|
case MXT_SPT_USERDATA_T38:
|
|
case MXT_SPT_DIGITIZER_T43:
|
|
case MXT_SPT_CTECONFIG_T46:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool mxt_object_writable(unsigned int type)
|
|
{
|
|
switch (type) {
|
|
case MXT_GEN_COMMAND_T6:
|
|
case MXT_GEN_POWER_T7:
|
|
case MXT_GEN_ACQUIRE_T8:
|
|
case MXT_TOUCH_MULTI_T9:
|
|
case MXT_TOUCH_KEYARRAY_T15:
|
|
case MXT_TOUCH_PROXIMITY_T23:
|
|
case MXT_TOUCH_PROXKEY_T52:
|
|
case MXT_PROCI_GRIPFACE_T20:
|
|
case MXT_PROCG_NOISE_T22:
|
|
case MXT_PROCI_ONETOUCH_T24:
|
|
case MXT_PROCI_TWOTOUCH_T27:
|
|
case MXT_PROCI_GRIP_T40:
|
|
case MXT_PROCI_PALM_T41:
|
|
case MXT_PROCI_TOUCHSUPPRESSION_T42:
|
|
case MXT_PROCI_STYLUS_T47:
|
|
case MXT_PROCG_NOISESUPPRESSION_T48:
|
|
case MXT_SPT_COMMSCONFIG_T18:
|
|
case MXT_SPT_GPIOPWM_T19:
|
|
case MXT_SPT_SELFTEST_T25:
|
|
case MXT_SPT_CTECONFIG_T28:
|
|
case MXT_SPT_DIGITIZER_T43:
|
|
case MXT_SPT_CTECONFIG_T46:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static void mxt_dump_message(struct device *dev,
|
|
struct mxt_message *message)
|
|
{
|
|
dev_dbg(dev, "reportid: %u\tmessage: %*ph\n",
|
|
message->reportid, 7, message->message);
|
|
}
|
|
|
|
static int mxt_wait_for_completion(struct mxt_data *data,
|
|
struct completion *comp,
|
|
unsigned int timeout_ms)
|
|
{
|
|
struct device *dev = &data->client->dev;
|
|
unsigned long timeout = msecs_to_jiffies(timeout_ms);
|
|
long ret;
|
|
|
|
ret = wait_for_completion_interruptible_timeout(comp, timeout);
|
|
if (ret < 0) {
|
|
return ret;
|
|
} else if (ret == 0) {
|
|
dev_err(dev, "Wait for completion timed out.\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int mxt_bootloader_read(struct mxt_data *data,
|
|
u8 *val, unsigned int count)
|
|
{
|
|
int ret;
|
|
struct i2c_msg msg;
|
|
|
|
msg.addr = data->bootloader_addr;
|
|
msg.flags = data->client->flags & I2C_M_TEN;
|
|
msg.flags |= I2C_M_RD;
|
|
msg.len = count;
|
|
msg.buf = val;
|
|
|
|
ret = i2c_transfer(data->client->adapter, &msg, 1);
|
|
|
|
if (ret == 1) {
|
|
ret = 0;
|
|
} else {
|
|
ret = ret < 0 ? ret : -EIO;
|
|
dev_err(&data->client->dev, "%s: i2c recv failed (%d)\n",
|
|
__func__, ret);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mxt_bootloader_write(struct mxt_data *data,
|
|
const u8 * const val, unsigned int count)
|
|
{
|
|
int ret;
|
|
struct i2c_msg msg;
|
|
|
|
msg.addr = data->bootloader_addr;
|
|
msg.flags = data->client->flags & I2C_M_TEN;
|
|
msg.len = count;
|
|
msg.buf = (u8 *)val;
|
|
|
|
ret = i2c_transfer(data->client->adapter, &msg, 1);
|
|
if (ret == 1) {
|
|
ret = 0;
|
|
} else {
|
|
ret = ret < 0 ? ret : -EIO;
|
|
dev_err(&data->client->dev, "%s: i2c send failed (%d)\n",
|
|
__func__, ret);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mxt_lookup_bootloader_address(struct mxt_data *data)
|
|
{
|
|
u8 appmode = data->client->addr;
|
|
u8 bootloader;
|
|
|
|
switch (appmode) {
|
|
case 0x4a:
|
|
case 0x4b:
|
|
case 0x4c:
|
|
case 0x4d:
|
|
case 0x5a:
|
|
case 0x5b:
|
|
bootloader = appmode - 0x26;
|
|
break;
|
|
default:
|
|
dev_err(&data->client->dev,
|
|
"Appmode i2c address 0x%02x not found\n",
|
|
appmode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
data->bootloader_addr = bootloader;
|
|
return 0;
|
|
}
|
|
|
|
static u8 mxt_get_bootloader_version(struct mxt_data *data, u8 val)
|
|
{
|
|
struct device *dev = &data->client->dev;
|
|
u8 buf[3];
|
|
|
|
if (val & MXT_BOOT_EXTENDED_ID) {
|
|
if (mxt_bootloader_read(data, &buf[0], 3) != 0) {
|
|
dev_err(dev, "%s: i2c failure\n", __func__);
|
|
return val;
|
|
}
|
|
|
|
dev_dbg(dev, "Bootloader ID:%d Version:%d\n", buf[1], buf[2]);
|
|
|
|
return buf[0];
|
|
} else {
|
|
dev_dbg(dev, "Bootloader ID:%d\n", val & MXT_BOOT_ID_MASK);
|
|
|
|
return val;
|
|
}
|
|
}
|
|
|
|
static int mxt_check_bootloader(struct mxt_data *data, unsigned int state)
|
|
{
|
|
struct device *dev = &data->client->dev;
|
|
u8 val;
|
|
int ret;
|
|
|
|
recheck:
|
|
if (state != MXT_WAITING_BOOTLOAD_CMD) {
|
|
/*
|
|
* In application update mode, the interrupt
|
|
* line signals state transitions. We must wait for the
|
|
* CHG assertion before reading the status byte.
|
|
* Once the status byte has been read, the line is deasserted.
|
|
*/
|
|
ret = mxt_wait_for_completion(data, &data->bl_completion,
|
|
MXT_FW_CHG_TIMEOUT);
|
|
if (ret) {
|
|
/*
|
|
* TODO: handle -ERESTARTSYS better by terminating
|
|
* fw update process before returning to userspace
|
|
* by writing length 0x000 to device (iff we are in
|
|
* WAITING_FRAME_DATA state).
|
|
*/
|
|
dev_err(dev, "Update wait error %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = mxt_bootloader_read(data, &val, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (state == MXT_WAITING_BOOTLOAD_CMD)
|
|
val = mxt_get_bootloader_version(data, val);
|
|
|
|
switch (state) {
|
|
case MXT_WAITING_BOOTLOAD_CMD:
|
|
case MXT_WAITING_FRAME_DATA:
|
|
val &= ~MXT_BOOT_STATUS_MASK;
|
|
break;
|
|
case MXT_FRAME_CRC_PASS:
|
|
if (val == MXT_FRAME_CRC_CHECK) {
|
|
goto recheck;
|
|
} else if (val == MXT_FRAME_CRC_FAIL) {
|
|
dev_err(dev, "Bootloader CRC fail\n");
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (val != state) {
|
|
dev_err(dev, "Invalid bootloader state %02X != %02X\n",
|
|
val, state);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxt_unlock_bootloader(struct mxt_data *data)
|
|
{
|
|
int ret;
|
|
u8 buf[2];
|
|
|
|
buf[0] = MXT_UNLOCK_CMD_LSB;
|
|
buf[1] = MXT_UNLOCK_CMD_MSB;
|
|
|
|
ret = mxt_bootloader_write(data, buf, 2);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __mxt_read_reg(struct i2c_client *client,
|
|
u16 reg, u16 len, void *val)
|
|
{
|
|
struct i2c_msg xfer[2];
|
|
u8 buf[2];
|
|
int ret;
|
|
|
|
buf[0] = reg & 0xff;
|
|
buf[1] = (reg >> 8) & 0xff;
|
|
|
|
/* Write register */
|
|
xfer[0].addr = client->addr;
|
|
xfer[0].flags = 0;
|
|
xfer[0].len = 2;
|
|
xfer[0].buf = buf;
|
|
|
|
/* Read data */
|
|
xfer[1].addr = client->addr;
|
|
xfer[1].flags = I2C_M_RD;
|
|
xfer[1].len = len;
|
|
xfer[1].buf = val;
|
|
|
|
ret = i2c_transfer(client->adapter, xfer, 2);
|
|
if (ret == 2) {
|
|
ret = 0;
|
|
} else {
|
|
if (ret >= 0)
|
|
ret = -EIO;
|
|
dev_err(&client->dev, "%s: i2c transfer failed (%d)\n",
|
|
__func__, ret);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __mxt_write_reg(struct i2c_client *client, u16 reg, u16 len,
|
|
const void *val)
|
|
{
|
|
u8 *buf;
|
|
size_t count;
|
|
int ret;
|
|
|
|
count = len + 2;
|
|
buf = kmalloc(count, GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
buf[0] = reg & 0xff;
|
|
buf[1] = (reg >> 8) & 0xff;
|
|
memcpy(&buf[2], val, len);
|
|
|
|
ret = i2c_master_send(client, buf, count);
|
|
if (ret == count) {
|
|
ret = 0;
|
|
} else {
|
|
if (ret >= 0)
|
|
ret = -EIO;
|
|
dev_err(&client->dev, "%s: i2c send failed (%d)\n",
|
|
__func__, ret);
|
|
}
|
|
|
|
kfree(buf);
|
|
return ret;
|
|
}
|
|
|
|
static int mxt_write_reg(struct i2c_client *client, u16 reg, u8 val)
|
|
{
|
|
return __mxt_write_reg(client, reg, 1, &val);
|
|
}
|
|
|
|
static struct mxt_object *
|
|
mxt_get_object(struct mxt_data *data, u8 type)
|
|
{
|
|
struct mxt_object *object;
|
|
int i;
|
|
|
|
for (i = 0; i < data->info.object_num; i++) {
|
|
object = data->object_table + i;
|
|
if (object->type == type)
|
|
return object;
|
|
}
|
|
|
|
dev_err(&data->client->dev, "Invalid object type T%u\n", type);
|
|
return NULL;
|
|
}
|
|
|
|
static int mxt_read_message(struct mxt_data *data,
|
|
struct mxt_message *message)
|
|
{
|
|
struct mxt_object *object;
|
|
u16 reg;
|
|
|
|
object = mxt_get_object(data, MXT_GEN_MESSAGE_T5);
|
|
if (!object)
|
|
return -EINVAL;
|
|
|
|
reg = object->start_address;
|
|
return __mxt_read_reg(data->client, reg,
|
|
sizeof(struct mxt_message), message);
|
|
}
|
|
|
|
static int mxt_write_object(struct mxt_data *data,
|
|
u8 type, u8 offset, u8 val)
|
|
{
|
|
struct mxt_object *object;
|
|
u16 reg;
|
|
|
|
object = mxt_get_object(data, type);
|
|
if (!object || offset >= mxt_obj_size(object))
|
|
return -EINVAL;
|
|
|
|
reg = object->start_address;
|
|
return mxt_write_reg(data->client, reg + offset, val);
|
|
}
|
|
|
|
static void mxt_input_button(struct mxt_data *data, struct mxt_message *message)
|
|
{
|
|
struct input_dev *input = data->input_dev;
|
|
const struct mxt_platform_data *pdata = data->pdata;
|
|
bool button;
|
|
int i;
|
|
|
|
/* Active-low switch */
|
|
for (i = 0; i < pdata->t19_num_keys; i++) {
|
|
if (pdata->t19_keymap[i] == KEY_RESERVED)
|
|
continue;
|
|
button = !(message->message[0] & (1 << i));
|
|
input_report_key(input, pdata->t19_keymap[i], button);
|
|
}
|
|
}
|
|
|
|
static void mxt_input_sync(struct input_dev *input_dev)
|
|
{
|
|
input_mt_report_pointer_emulation(input_dev, false);
|
|
input_sync(input_dev);
|
|
}
|
|
|
|
static void mxt_input_touchevent(struct mxt_data *data,
|
|
struct mxt_message *message, int id)
|
|
{
|
|
struct device *dev = &data->client->dev;
|
|
u8 status = message->message[0];
|
|
struct input_dev *input_dev = data->input_dev;
|
|
int x;
|
|
int y;
|
|
int area;
|
|
int amplitude;
|
|
|
|
x = (message->message[1] << 4) | ((message->message[3] >> 4) & 0xf);
|
|
y = (message->message[2] << 4) | ((message->message[3] & 0xf));
|
|
|
|
/* Handle 10/12 bit switching */
|
|
if (data->max_x < 1024)
|
|
x >>= 2;
|
|
if (data->max_y < 1024)
|
|
y >>= 2;
|
|
|
|
area = message->message[4];
|
|
amplitude = message->message[5];
|
|
|
|
dev_dbg(dev,
|
|
"[%u] %c%c%c%c%c%c%c%c x: %5u y: %5u area: %3u amp: %3u\n",
|
|
id,
|
|
(status & MXT_T9_DETECT) ? 'D' : '.',
|
|
(status & MXT_T9_PRESS) ? 'P' : '.',
|
|
(status & MXT_T9_RELEASE) ? 'R' : '.',
|
|
(status & MXT_T9_MOVE) ? 'M' : '.',
|
|
(status & MXT_T9_VECTOR) ? 'V' : '.',
|
|
(status & MXT_T9_AMP) ? 'A' : '.',
|
|
(status & MXT_T9_SUPPRESS) ? 'S' : '.',
|
|
(status & MXT_T9_UNGRIP) ? 'U' : '.',
|
|
x, y, area, amplitude);
|
|
|
|
input_mt_slot(input_dev, id);
|
|
|
|
if (status & MXT_T9_DETECT) {
|
|
/*
|
|
* Multiple bits may be set if the host is slow to read
|
|
* the status messages, indicating all the events that
|
|
* have happened.
|
|
*/
|
|
if (status & MXT_T9_RELEASE) {
|
|
input_mt_report_slot_state(input_dev,
|
|
MT_TOOL_FINGER, 0);
|
|
mxt_input_sync(input_dev);
|
|
}
|
|
|
|
/* Touch active */
|
|
input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 1);
|
|
input_report_abs(input_dev, ABS_MT_POSITION_X, x);
|
|
input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
|
|
input_report_abs(input_dev, ABS_MT_PRESSURE, amplitude);
|
|
input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, area);
|
|
} else {
|
|
/* Touch no longer active, close out slot */
|
|
input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 0);
|
|
}
|
|
}
|
|
|
|
static u16 mxt_extract_T6_csum(const u8 *csum)
|
|
{
|
|
return csum[0] | (csum[1] << 8) | (csum[2] << 16);
|
|
}
|
|
|
|
static bool mxt_is_T9_message(struct mxt_data *data, struct mxt_message *msg)
|
|
{
|
|
u8 id = msg->reportid;
|
|
return (id >= data->T9_reportid_min && id <= data->T9_reportid_max);
|
|
}
|
|
|
|
static irqreturn_t mxt_process_messages_until_invalid(struct mxt_data *data)
|
|
{
|
|
struct mxt_message message;
|
|
const u8 *payload = &message.message[0];
|
|
struct device *dev = &data->client->dev;
|
|
u8 reportid;
|
|
bool update_input = false;
|
|
u32 crc;
|
|
|
|
do {
|
|
if (mxt_read_message(data, &message)) {
|
|
dev_err(dev, "Failed to read message\n");
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
reportid = message.reportid;
|
|
|
|
if (reportid == data->T6_reportid) {
|
|
u8 status = payload[0];
|
|
|
|
crc = mxt_extract_T6_csum(&payload[1]);
|
|
if (crc != data->config_crc) {
|
|
data->config_crc = crc;
|
|
complete(&data->crc_completion);
|
|
}
|
|
|
|
dev_dbg(dev, "Status: %02x Config Checksum: %06x\n",
|
|
status, data->config_crc);
|
|
|
|
if (status & MXT_T6_STATUS_RESET)
|
|
complete(&data->reset_completion);
|
|
} else if (mxt_is_T9_message(data, &message)) {
|
|
int id = reportid - data->T9_reportid_min;
|
|
mxt_input_touchevent(data, &message, id);
|
|
update_input = true;
|
|
} else if (message.reportid == data->T19_reportid) {
|
|
mxt_input_button(data, &message);
|
|
update_input = true;
|
|
} else {
|
|
mxt_dump_message(dev, &message);
|
|
}
|
|
} while (reportid != 0xff);
|
|
|
|
if (update_input)
|
|
mxt_input_sync(data->input_dev);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t mxt_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct mxt_data *data = dev_id;
|
|
|
|
if (data->in_bootloader) {
|
|
/* bootloader state transition completion */
|
|
complete(&data->bl_completion);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
return mxt_process_messages_until_invalid(data);
|
|
}
|
|
|
|
static int mxt_t6_command(struct mxt_data *data, u16 cmd_offset,
|
|
u8 value, bool wait)
|
|
{
|
|
u16 reg;
|
|
u8 command_register;
|
|
int timeout_counter = 0;
|
|
int ret;
|
|
|
|
reg = data->T6_address + cmd_offset;
|
|
|
|
ret = mxt_write_reg(data->client, reg, value);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!wait)
|
|
return 0;
|
|
|
|
do {
|
|
msleep(20);
|
|
ret = __mxt_read_reg(data->client, reg, 1, &command_register);
|
|
if (ret)
|
|
return ret;
|
|
} while (command_register != 0 && timeout_counter++ <= 100);
|
|
|
|
if (timeout_counter > 100) {
|
|
dev_err(&data->client->dev, "Command failed!\n");
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxt_soft_reset(struct mxt_data *data)
|
|
{
|
|
struct device *dev = &data->client->dev;
|
|
int ret = 0;
|
|
|
|
dev_info(dev, "Resetting chip\n");
|
|
|
|
reinit_completion(&data->reset_completion);
|
|
|
|
ret = mxt_t6_command(data, MXT_COMMAND_RESET, MXT_RESET_VALUE, false);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = mxt_wait_for_completion(data, &data->reset_completion,
|
|
MXT_RESET_TIMEOUT);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mxt_update_crc(struct mxt_data *data, u8 cmd, u8 value)
|
|
{
|
|
/*
|
|
* On failure, CRC is set to 0 and config will always be
|
|
* downloaded.
|
|
*/
|
|
data->config_crc = 0;
|
|
reinit_completion(&data->crc_completion);
|
|
|
|
mxt_t6_command(data, cmd, value, true);
|
|
|
|
/*
|
|
* Wait for crc message. On failure, CRC is set to 0 and config will
|
|
* always be downloaded.
|
|
*/
|
|
mxt_wait_for_completion(data, &data->crc_completion, MXT_CRC_TIMEOUT);
|
|
}
|
|
|
|
static int mxt_check_reg_init(struct mxt_data *data)
|
|
{
|
|
const struct mxt_platform_data *pdata = data->pdata;
|
|
struct mxt_object *object;
|
|
struct device *dev = &data->client->dev;
|
|
int index = 0;
|
|
int i, size;
|
|
int ret;
|
|
|
|
if (!pdata->config) {
|
|
dev_dbg(dev, "No cfg data defined, skipping reg init\n");
|
|
return 0;
|
|
}
|
|
|
|
mxt_update_crc(data, MXT_COMMAND_REPORTALL, 1);
|
|
|
|
if (data->config_crc == pdata->config_crc) {
|
|
dev_info(dev, "Config CRC 0x%06X: OK\n", data->config_crc);
|
|
return 0;
|
|
}
|
|
|
|
dev_info(dev, "Config CRC 0x%06X: does not match 0x%06X\n",
|
|
data->config_crc, pdata->config_crc);
|
|
|
|
for (i = 0; i < data->info.object_num; i++) {
|
|
object = data->object_table + i;
|
|
|
|
if (!mxt_object_writable(object->type))
|
|
continue;
|
|
|
|
size = mxt_obj_size(object) * mxt_obj_instances(object);
|
|
if (index + size > pdata->config_length) {
|
|
dev_err(dev, "Not enough config data!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = __mxt_write_reg(data->client, object->start_address,
|
|
size, &pdata->config[index]);
|
|
if (ret)
|
|
return ret;
|
|
index += size;
|
|
}
|
|
|
|
mxt_update_crc(data, MXT_COMMAND_BACKUPNV, MXT_BACKUP_VALUE);
|
|
|
|
ret = mxt_soft_reset(data);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev_info(dev, "Config successfully updated\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxt_make_highchg(struct mxt_data *data)
|
|
{
|
|
struct device *dev = &data->client->dev;
|
|
struct mxt_message message;
|
|
int count = 10;
|
|
int error;
|
|
|
|
/* Read dummy message to make high CHG pin */
|
|
do {
|
|
error = mxt_read_message(data, &message);
|
|
if (error)
|
|
return error;
|
|
} while (message.reportid != 0xff && --count);
|
|
|
|
if (!count) {
|
|
dev_err(dev, "CHG pin isn't cleared\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxt_get_info(struct mxt_data *data)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
struct mxt_info *info = &data->info;
|
|
int error;
|
|
|
|
/* Read 7-byte info block starting at address 0 */
|
|
error = __mxt_read_reg(client, MXT_INFO, sizeof(*info), info);
|
|
if (error)
|
|
return error;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxt_get_object_table(struct mxt_data *data)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
size_t table_size;
|
|
int error;
|
|
int i;
|
|
u8 reportid;
|
|
|
|
table_size = data->info.object_num * sizeof(struct mxt_object);
|
|
error = __mxt_read_reg(client, MXT_OBJECT_START, table_size,
|
|
data->object_table);
|
|
if (error)
|
|
return error;
|
|
|
|
/* Valid Report IDs start counting from 1 */
|
|
reportid = 1;
|
|
for (i = 0; i < data->info.object_num; i++) {
|
|
struct mxt_object *object = data->object_table + i;
|
|
u8 min_id, max_id;
|
|
|
|
le16_to_cpus(&object->start_address);
|
|
|
|
if (object->num_report_ids) {
|
|
min_id = reportid;
|
|
reportid += object->num_report_ids *
|
|
mxt_obj_instances(object);
|
|
max_id = reportid - 1;
|
|
} else {
|
|
min_id = 0;
|
|
max_id = 0;
|
|
}
|
|
|
|
dev_dbg(&data->client->dev,
|
|
"T%u Start:%u Size:%zu Instances:%zu Report IDs:%u-%u\n",
|
|
object->type, object->start_address,
|
|
mxt_obj_size(object), mxt_obj_instances(object),
|
|
min_id, max_id);
|
|
|
|
switch (object->type) {
|
|
case MXT_GEN_COMMAND_T6:
|
|
data->T6_reportid = min_id;
|
|
data->T6_address = object->start_address;
|
|
break;
|
|
case MXT_TOUCH_MULTI_T9:
|
|
data->T9_reportid_min = min_id;
|
|
data->T9_reportid_max = max_id;
|
|
break;
|
|
case MXT_SPT_GPIOPWM_T19:
|
|
data->T19_reportid = min_id;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mxt_free_object_table(struct mxt_data *data)
|
|
{
|
|
kfree(data->object_table);
|
|
data->object_table = NULL;
|
|
data->T6_reportid = 0;
|
|
data->T9_reportid_min = 0;
|
|
data->T9_reportid_max = 0;
|
|
data->T19_reportid = 0;
|
|
}
|
|
|
|
static int mxt_read_t9_resolution(struct mxt_data *data)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
int error;
|
|
struct t9_range range;
|
|
unsigned char orient;
|
|
struct mxt_object *object;
|
|
|
|
object = mxt_get_object(data, MXT_TOUCH_MULTI_T9);
|
|
if (!object)
|
|
return -EINVAL;
|
|
|
|
error = __mxt_read_reg(client,
|
|
object->start_address + MXT_T9_RANGE,
|
|
sizeof(range), &range);
|
|
if (error)
|
|
return error;
|
|
|
|
le16_to_cpus(&range.x);
|
|
le16_to_cpus(&range.y);
|
|
|
|
error = __mxt_read_reg(client,
|
|
object->start_address + MXT_T9_ORIENT,
|
|
1, &orient);
|
|
if (error)
|
|
return error;
|
|
|
|
/* Handle default values */
|
|
if (range.x == 0)
|
|
range.x = 1023;
|
|
|
|
if (range.y == 0)
|
|
range.y = 1023;
|
|
|
|
if (orient & MXT_T9_ORIENT_SWITCH) {
|
|
data->max_x = range.y;
|
|
data->max_y = range.x;
|
|
} else {
|
|
data->max_x = range.x;
|
|
data->max_y = range.y;
|
|
}
|
|
|
|
dev_dbg(&client->dev,
|
|
"Touchscreen size X%uY%u\n", data->max_x, data->max_y);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxt_initialize(struct mxt_data *data)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
struct mxt_info *info = &data->info;
|
|
int error;
|
|
|
|
error = mxt_get_info(data);
|
|
if (error)
|
|
return error;
|
|
|
|
data->object_table = kcalloc(info->object_num,
|
|
sizeof(struct mxt_object),
|
|
GFP_KERNEL);
|
|
if (!data->object_table) {
|
|
dev_err(&client->dev, "Failed to allocate memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Get object table information */
|
|
error = mxt_get_object_table(data);
|
|
if (error) {
|
|
dev_err(&client->dev, "Error %d reading object table\n", error);
|
|
goto err_free_object_table;
|
|
}
|
|
|
|
/* Check register init values */
|
|
error = mxt_check_reg_init(data);
|
|
if (error) {
|
|
dev_err(&client->dev, "Error %d initializing configuration\n",
|
|
error);
|
|
goto err_free_object_table;
|
|
}
|
|
|
|
error = mxt_read_t9_resolution(data);
|
|
if (error) {
|
|
dev_err(&client->dev, "Failed to initialize T9 resolution\n");
|
|
goto err_free_object_table;
|
|
}
|
|
|
|
dev_info(&client->dev,
|
|
"Family: %u Variant: %u Firmware V%u.%u.%02X Objects: %u\n",
|
|
info->family_id, info->variant_id, info->version >> 4,
|
|
info->version & 0xf, info->build, info->object_num);
|
|
|
|
return 0;
|
|
|
|
err_free_object_table:
|
|
mxt_free_object_table(data);
|
|
return error;
|
|
}
|
|
|
|
/* Firmware Version is returned as Major.Minor.Build */
|
|
static ssize_t mxt_fw_version_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct mxt_data *data = dev_get_drvdata(dev);
|
|
struct mxt_info *info = &data->info;
|
|
return scnprintf(buf, PAGE_SIZE, "%u.%u.%02X\n",
|
|
info->version >> 4, info->version & 0xf, info->build);
|
|
}
|
|
|
|
/* Hardware Version is returned as FamilyID.VariantID */
|
|
static ssize_t mxt_hw_version_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct mxt_data *data = dev_get_drvdata(dev);
|
|
struct mxt_info *info = &data->info;
|
|
return scnprintf(buf, PAGE_SIZE, "%u.%u\n",
|
|
info->family_id, info->variant_id);
|
|
}
|
|
|
|
static ssize_t mxt_show_instance(char *buf, int count,
|
|
struct mxt_object *object, int instance,
|
|
const u8 *val)
|
|
{
|
|
int i;
|
|
|
|
if (mxt_obj_instances(object) > 1)
|
|
count += scnprintf(buf + count, PAGE_SIZE - count,
|
|
"Instance %u\n", instance);
|
|
|
|
for (i = 0; i < mxt_obj_size(object); i++)
|
|
count += scnprintf(buf + count, PAGE_SIZE - count,
|
|
"\t[%2u]: %02x (%d)\n", i, val[i], val[i]);
|
|
count += scnprintf(buf + count, PAGE_SIZE - count, "\n");
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t mxt_object_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct mxt_data *data = dev_get_drvdata(dev);
|
|
struct mxt_object *object;
|
|
int count = 0;
|
|
int i, j;
|
|
int error;
|
|
u8 *obuf;
|
|
|
|
/* Pre-allocate buffer large enough to hold max sized object. */
|
|
obuf = kmalloc(256, GFP_KERNEL);
|
|
if (!obuf)
|
|
return -ENOMEM;
|
|
|
|
error = 0;
|
|
for (i = 0; i < data->info.object_num; i++) {
|
|
object = data->object_table + i;
|
|
|
|
if (!mxt_object_readable(object->type))
|
|
continue;
|
|
|
|
count += scnprintf(buf + count, PAGE_SIZE - count,
|
|
"T%u:\n", object->type);
|
|
|
|
for (j = 0; j < mxt_obj_instances(object); j++) {
|
|
u16 size = mxt_obj_size(object);
|
|
u16 addr = object->start_address + j * size;
|
|
|
|
error = __mxt_read_reg(data->client, addr, size, obuf);
|
|
if (error)
|
|
goto done;
|
|
|
|
count = mxt_show_instance(buf, count, object, j, obuf);
|
|
}
|
|
}
|
|
|
|
done:
|
|
kfree(obuf);
|
|
return error ?: count;
|
|
}
|
|
|
|
static int mxt_check_firmware_format(struct device *dev,
|
|
const struct firmware *fw)
|
|
{
|
|
unsigned int pos = 0;
|
|
char c;
|
|
|
|
while (pos < fw->size) {
|
|
c = *(fw->data + pos);
|
|
|
|
if (c < '0' || (c > '9' && c < 'A') || c > 'F')
|
|
return 0;
|
|
|
|
pos++;
|
|
}
|
|
|
|
/*
|
|
* To convert file try:
|
|
* xxd -r -p mXTXXX__APP_VX-X-XX.enc > maxtouch.fw
|
|
*/
|
|
dev_err(dev, "Aborting: firmware file must be in binary format\n");
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int mxt_load_fw(struct device *dev, const char *fn)
|
|
{
|
|
struct mxt_data *data = dev_get_drvdata(dev);
|
|
const struct firmware *fw = NULL;
|
|
unsigned int frame_size;
|
|
unsigned int pos = 0;
|
|
unsigned int retry = 0;
|
|
unsigned int frame = 0;
|
|
int ret;
|
|
|
|
ret = request_firmware(&fw, fn, dev);
|
|
if (ret) {
|
|
dev_err(dev, "Unable to open firmware %s\n", fn);
|
|
return ret;
|
|
}
|
|
|
|
/* Check for incorrect enc file */
|
|
ret = mxt_check_firmware_format(dev, fw);
|
|
if (ret)
|
|
goto release_firmware;
|
|
|
|
ret = mxt_lookup_bootloader_address(data);
|
|
if (ret)
|
|
goto release_firmware;
|
|
|
|
/* Change to the bootloader mode */
|
|
data->in_bootloader = true;
|
|
|
|
ret = mxt_t6_command(data, MXT_COMMAND_RESET, MXT_BOOT_VALUE, false);
|
|
if (ret)
|
|
goto release_firmware;
|
|
|
|
msleep(MXT_RESET_TIME);
|
|
|
|
reinit_completion(&data->bl_completion);
|
|
|
|
ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD);
|
|
if (ret)
|
|
goto disable_irq;
|
|
|
|
/* Unlock bootloader */
|
|
mxt_unlock_bootloader(data);
|
|
|
|
while (pos < fw->size) {
|
|
ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA);
|
|
if (ret)
|
|
goto disable_irq;
|
|
|
|
frame_size = ((*(fw->data + pos) << 8) | *(fw->data + pos + 1));
|
|
|
|
/* Take account of CRC bytes */
|
|
frame_size += 2;
|
|
|
|
/* Write one frame to device */
|
|
ret = mxt_bootloader_write(data, fw->data + pos, frame_size);
|
|
if (ret)
|
|
goto disable_irq;
|
|
|
|
ret = mxt_check_bootloader(data, MXT_FRAME_CRC_PASS);
|
|
if (ret) {
|
|
retry++;
|
|
|
|
/* Back off by 20ms per retry */
|
|
msleep(retry * 20);
|
|
|
|
if (retry > 20) {
|
|
dev_err(dev, "Retry count exceeded\n");
|
|
goto disable_irq;
|
|
}
|
|
} else {
|
|
retry = 0;
|
|
pos += frame_size;
|
|
frame++;
|
|
}
|
|
|
|
if (frame % 50 == 0)
|
|
dev_dbg(dev, "Sent %d frames, %d/%zd bytes\n",
|
|
frame, pos, fw->size);
|
|
}
|
|
|
|
/* Wait for flash. */
|
|
ret = mxt_wait_for_completion(data, &data->bl_completion,
|
|
MXT_FW_RESET_TIME);
|
|
if (ret)
|
|
goto disable_irq;
|
|
|
|
dev_dbg(dev, "Sent %d frames, %d bytes\n", frame, pos);
|
|
|
|
/*
|
|
* Wait for device to reset. Some bootloader versions do not assert
|
|
* the CHG line after bootloading has finished, so ignore potential
|
|
* errors.
|
|
*/
|
|
mxt_wait_for_completion(data, &data->bl_completion, MXT_FW_RESET_TIME);
|
|
|
|
data->in_bootloader = false;
|
|
|
|
disable_irq:
|
|
disable_irq(data->irq);
|
|
release_firmware:
|
|
release_firmware(fw);
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t mxt_update_fw_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct mxt_data *data = dev_get_drvdata(dev);
|
|
int error;
|
|
|
|
error = mxt_load_fw(dev, MXT_FW_NAME);
|
|
if (error) {
|
|
dev_err(dev, "The firmware update failed(%d)\n", error);
|
|
count = error;
|
|
} else {
|
|
dev_info(dev, "The firmware update succeeded\n");
|
|
|
|
mxt_free_object_table(data);
|
|
|
|
mxt_initialize(data);
|
|
|
|
enable_irq(data->irq);
|
|
|
|
error = mxt_make_highchg(data);
|
|
if (error)
|
|
return error;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR(fw_version, S_IRUGO, mxt_fw_version_show, NULL);
|
|
static DEVICE_ATTR(hw_version, S_IRUGO, mxt_hw_version_show, NULL);
|
|
static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
|
|
static DEVICE_ATTR(update_fw, S_IWUSR, NULL, mxt_update_fw_store);
|
|
|
|
static struct attribute *mxt_attrs[] = {
|
|
&dev_attr_fw_version.attr,
|
|
&dev_attr_hw_version.attr,
|
|
&dev_attr_object.attr,
|
|
&dev_attr_update_fw.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group mxt_attr_group = {
|
|
.attrs = mxt_attrs,
|
|
};
|
|
|
|
static void mxt_start(struct mxt_data *data)
|
|
{
|
|
/* Touch enable */
|
|
mxt_write_object(data,
|
|
MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0x83);
|
|
}
|
|
|
|
static void mxt_stop(struct mxt_data *data)
|
|
{
|
|
/* Touch disable */
|
|
mxt_write_object(data,
|
|
MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0);
|
|
}
|
|
|
|
static int mxt_input_open(struct input_dev *dev)
|
|
{
|
|
struct mxt_data *data = input_get_drvdata(dev);
|
|
|
|
mxt_start(data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mxt_input_close(struct input_dev *dev)
|
|
{
|
|
struct mxt_data *data = input_get_drvdata(dev);
|
|
|
|
mxt_stop(data);
|
|
}
|
|
|
|
static int mxt_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
const struct mxt_platform_data *pdata = dev_get_platdata(&client->dev);
|
|
struct mxt_data *data;
|
|
struct input_dev *input_dev;
|
|
int error;
|
|
unsigned int num_mt_slots;
|
|
unsigned int mt_flags = 0;
|
|
int i;
|
|
|
|
if (!pdata)
|
|
return -EINVAL;
|
|
|
|
data = kzalloc(sizeof(struct mxt_data), GFP_KERNEL);
|
|
input_dev = input_allocate_device();
|
|
if (!data || !input_dev) {
|
|
dev_err(&client->dev, "Failed to allocate memory\n");
|
|
error = -ENOMEM;
|
|
goto err_free_mem;
|
|
}
|
|
|
|
input_dev->name = "Atmel maXTouch Touchscreen";
|
|
snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0",
|
|
client->adapter->nr, client->addr);
|
|
|
|
input_dev->phys = data->phys;
|
|
|
|
input_dev->id.bustype = BUS_I2C;
|
|
input_dev->dev.parent = &client->dev;
|
|
input_dev->open = mxt_input_open;
|
|
input_dev->close = mxt_input_close;
|
|
|
|
data->client = client;
|
|
data->input_dev = input_dev;
|
|
data->pdata = pdata;
|
|
data->irq = client->irq;
|
|
|
|
init_completion(&data->bl_completion);
|
|
init_completion(&data->reset_completion);
|
|
init_completion(&data->crc_completion);
|
|
|
|
error = mxt_initialize(data);
|
|
if (error)
|
|
goto err_free_mem;
|
|
|
|
__set_bit(EV_ABS, input_dev->evbit);
|
|
__set_bit(EV_KEY, input_dev->evbit);
|
|
__set_bit(BTN_TOUCH, input_dev->keybit);
|
|
|
|
if (pdata->t19_num_keys) {
|
|
__set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
|
|
|
|
for (i = 0; i < pdata->t19_num_keys; i++)
|
|
if (pdata->t19_keymap[i] != KEY_RESERVED)
|
|
input_set_capability(input_dev, EV_KEY,
|
|
pdata->t19_keymap[i]);
|
|
|
|
mt_flags |= INPUT_MT_POINTER;
|
|
|
|
input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM);
|
|
input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM);
|
|
input_abs_set_res(input_dev, ABS_MT_POSITION_X,
|
|
MXT_PIXELS_PER_MM);
|
|
input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
|
|
MXT_PIXELS_PER_MM);
|
|
|
|
input_dev->name = "Atmel maXTouch Touchpad";
|
|
}
|
|
|
|
/* For single touch */
|
|
input_set_abs_params(input_dev, ABS_X,
|
|
0, data->max_x, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_Y,
|
|
0, data->max_y, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_PRESSURE,
|
|
0, 255, 0, 0);
|
|
|
|
/* For multi touch */
|
|
num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1;
|
|
error = input_mt_init_slots(input_dev, num_mt_slots, mt_flags);
|
|
if (error)
|
|
goto err_free_object;
|
|
input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
|
|
0, MXT_MAX_AREA, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_MT_POSITION_X,
|
|
0, data->max_x, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
|
|
0, data->max_y, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_MT_PRESSURE,
|
|
0, 255, 0, 0);
|
|
|
|
input_set_drvdata(input_dev, data);
|
|
i2c_set_clientdata(client, data);
|
|
|
|
error = request_threaded_irq(client->irq, NULL, mxt_interrupt,
|
|
pdata->irqflags | IRQF_ONESHOT,
|
|
client->name, data);
|
|
if (error) {
|
|
dev_err(&client->dev, "Failed to register interrupt\n");
|
|
goto err_free_object;
|
|
}
|
|
|
|
error = mxt_make_highchg(data);
|
|
if (error)
|
|
goto err_free_irq;
|
|
|
|
error = input_register_device(input_dev);
|
|
if (error) {
|
|
dev_err(&client->dev, "Error %d registering input device\n",
|
|
error);
|
|
goto err_free_irq;
|
|
}
|
|
|
|
error = sysfs_create_group(&client->dev.kobj, &mxt_attr_group);
|
|
if (error) {
|
|
dev_err(&client->dev, "Failure %d creating sysfs group\n",
|
|
error);
|
|
goto err_unregister_device;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_unregister_device:
|
|
input_unregister_device(input_dev);
|
|
input_dev = NULL;
|
|
err_free_irq:
|
|
free_irq(client->irq, data);
|
|
err_free_object:
|
|
kfree(data->object_table);
|
|
err_free_mem:
|
|
input_free_device(input_dev);
|
|
kfree(data);
|
|
return error;
|
|
}
|
|
|
|
static int mxt_remove(struct i2c_client *client)
|
|
{
|
|
struct mxt_data *data = i2c_get_clientdata(client);
|
|
|
|
sysfs_remove_group(&client->dev.kobj, &mxt_attr_group);
|
|
free_irq(data->irq, data);
|
|
input_unregister_device(data->input_dev);
|
|
kfree(data->object_table);
|
|
kfree(data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int mxt_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct mxt_data *data = i2c_get_clientdata(client);
|
|
struct input_dev *input_dev = data->input_dev;
|
|
|
|
mutex_lock(&input_dev->mutex);
|
|
|
|
if (input_dev->users)
|
|
mxt_stop(data);
|
|
|
|
mutex_unlock(&input_dev->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxt_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct mxt_data *data = i2c_get_clientdata(client);
|
|
struct input_dev *input_dev = data->input_dev;
|
|
|
|
mxt_soft_reset(data);
|
|
|
|
mutex_lock(&input_dev->mutex);
|
|
|
|
if (input_dev->users)
|
|
mxt_start(data);
|
|
|
|
mutex_unlock(&input_dev->mutex);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume);
|
|
|
|
static const struct i2c_device_id mxt_id[] = {
|
|
{ "qt602240_ts", 0 },
|
|
{ "atmel_mxt_ts", 0 },
|
|
{ "atmel_mxt_tp", 0 },
|
|
{ "mXT224", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, mxt_id);
|
|
|
|
static struct i2c_driver mxt_driver = {
|
|
.driver = {
|
|
.name = "atmel_mxt_ts",
|
|
.owner = THIS_MODULE,
|
|
.pm = &mxt_pm_ops,
|
|
},
|
|
.probe = mxt_probe,
|
|
.remove = mxt_remove,
|
|
.id_table = mxt_id,
|
|
};
|
|
|
|
module_i2c_driver(mxt_driver);
|
|
|
|
/* Module information */
|
|
MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
|
|
MODULE_DESCRIPTION("Atmel maXTouch Touchscreen driver");
|
|
MODULE_LICENSE("GPL");
|