938 lines
22 KiB
C
938 lines
22 KiB
C
/*
|
|
* GPMC support functions
|
|
*
|
|
* Copyright (C) 2005-2006 Nokia Corporation
|
|
*
|
|
* Author: Juha Yrjola
|
|
*
|
|
* Copyright (C) 2009 Texas Instruments
|
|
* Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#undef DEBUG
|
|
|
|
#include <linux/irq.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <plat/gpmc.h>
|
|
|
|
#include <plat/sdrc.h>
|
|
|
|
/* GPMC register offsets */
|
|
#define GPMC_REVISION 0x00
|
|
#define GPMC_SYSCONFIG 0x10
|
|
#define GPMC_SYSSTATUS 0x14
|
|
#define GPMC_IRQSTATUS 0x18
|
|
#define GPMC_IRQENABLE 0x1c
|
|
#define GPMC_TIMEOUT_CONTROL 0x40
|
|
#define GPMC_ERR_ADDRESS 0x44
|
|
#define GPMC_ERR_TYPE 0x48
|
|
#define GPMC_CONFIG 0x50
|
|
#define GPMC_STATUS 0x54
|
|
#define GPMC_PREFETCH_CONFIG1 0x1e0
|
|
#define GPMC_PREFETCH_CONFIG2 0x1e4
|
|
#define GPMC_PREFETCH_CONTROL 0x1ec
|
|
#define GPMC_PREFETCH_STATUS 0x1f0
|
|
#define GPMC_ECC_CONFIG 0x1f4
|
|
#define GPMC_ECC_CONTROL 0x1f8
|
|
#define GPMC_ECC_SIZE_CONFIG 0x1fc
|
|
#define GPMC_ECC1_RESULT 0x200
|
|
|
|
/* GPMC ECC control settings */
|
|
#define GPMC_ECC_CTRL_ECCCLEAR 0x100
|
|
#define GPMC_ECC_CTRL_ECCDISABLE 0x000
|
|
#define GPMC_ECC_CTRL_ECCREG1 0x001
|
|
#define GPMC_ECC_CTRL_ECCREG2 0x002
|
|
#define GPMC_ECC_CTRL_ECCREG3 0x003
|
|
#define GPMC_ECC_CTRL_ECCREG4 0x004
|
|
#define GPMC_ECC_CTRL_ECCREG5 0x005
|
|
#define GPMC_ECC_CTRL_ECCREG6 0x006
|
|
#define GPMC_ECC_CTRL_ECCREG7 0x007
|
|
#define GPMC_ECC_CTRL_ECCREG8 0x008
|
|
#define GPMC_ECC_CTRL_ECCREG9 0x009
|
|
|
|
#define GPMC_CS0_OFFSET 0x60
|
|
#define GPMC_CS_SIZE 0x30
|
|
|
|
#define GPMC_MEM_START 0x00000000
|
|
#define GPMC_MEM_END 0x3FFFFFFF
|
|
#define BOOT_ROM_SPACE 0x100000 /* 1MB */
|
|
|
|
#define GPMC_CHUNK_SHIFT 24 /* 16 MB */
|
|
#define GPMC_SECTION_SHIFT 28 /* 128 MB */
|
|
|
|
#define CS_NUM_SHIFT 24
|
|
#define ENABLE_PREFETCH (0x1 << 7)
|
|
#define DMA_MPU_MODE 2
|
|
|
|
/* Structure to save gpmc cs context */
|
|
struct gpmc_cs_config {
|
|
u32 config1;
|
|
u32 config2;
|
|
u32 config3;
|
|
u32 config4;
|
|
u32 config5;
|
|
u32 config6;
|
|
u32 config7;
|
|
int is_valid;
|
|
};
|
|
|
|
/*
|
|
* Structure to save/restore gpmc context
|
|
* to support core off on OMAP3
|
|
*/
|
|
struct omap3_gpmc_regs {
|
|
u32 sysconfig;
|
|
u32 irqenable;
|
|
u32 timeout_ctrl;
|
|
u32 config;
|
|
u32 prefetch_config1;
|
|
u32 prefetch_config2;
|
|
u32 prefetch_control;
|
|
struct gpmc_cs_config cs_context[GPMC_CS_NUM];
|
|
};
|
|
|
|
static struct resource gpmc_mem_root;
|
|
static struct resource gpmc_cs_mem[GPMC_CS_NUM];
|
|
static DEFINE_SPINLOCK(gpmc_mem_lock);
|
|
static unsigned int gpmc_cs_map; /* flag for cs which are initialized */
|
|
static int gpmc_ecc_used = -EINVAL; /* cs using ecc engine */
|
|
|
|
static void __iomem *gpmc_base;
|
|
|
|
static struct clk *gpmc_l3_clk;
|
|
|
|
static irqreturn_t gpmc_handle_irq(int irq, void *dev);
|
|
|
|
static void gpmc_write_reg(int idx, u32 val)
|
|
{
|
|
__raw_writel(val, gpmc_base + idx);
|
|
}
|
|
|
|
static u32 gpmc_read_reg(int idx)
|
|
{
|
|
return __raw_readl(gpmc_base + idx);
|
|
}
|
|
|
|
static void gpmc_cs_write_byte(int cs, int idx, u8 val)
|
|
{
|
|
void __iomem *reg_addr;
|
|
|
|
reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
|
|
__raw_writeb(val, reg_addr);
|
|
}
|
|
|
|
static u8 gpmc_cs_read_byte(int cs, int idx)
|
|
{
|
|
void __iomem *reg_addr;
|
|
|
|
reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
|
|
return __raw_readb(reg_addr);
|
|
}
|
|
|
|
void gpmc_cs_write_reg(int cs, int idx, u32 val)
|
|
{
|
|
void __iomem *reg_addr;
|
|
|
|
reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
|
|
__raw_writel(val, reg_addr);
|
|
}
|
|
|
|
u32 gpmc_cs_read_reg(int cs, int idx)
|
|
{
|
|
void __iomem *reg_addr;
|
|
|
|
reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
|
|
return __raw_readl(reg_addr);
|
|
}
|
|
|
|
/* TODO: Add support for gpmc_fck to clock framework and use it */
|
|
unsigned long gpmc_get_fclk_period(void)
|
|
{
|
|
unsigned long rate = clk_get_rate(gpmc_l3_clk);
|
|
|
|
if (rate == 0) {
|
|
printk(KERN_WARNING "gpmc_l3_clk not enabled\n");
|
|
return 0;
|
|
}
|
|
|
|
rate /= 1000;
|
|
rate = 1000000000 / rate; /* In picoseconds */
|
|
|
|
return rate;
|
|
}
|
|
|
|
unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
|
|
{
|
|
unsigned long tick_ps;
|
|
|
|
/* Calculate in picosecs to yield more exact results */
|
|
tick_ps = gpmc_get_fclk_period();
|
|
|
|
return (time_ns * 1000 + tick_ps - 1) / tick_ps;
|
|
}
|
|
|
|
unsigned int gpmc_ps_to_ticks(unsigned int time_ps)
|
|
{
|
|
unsigned long tick_ps;
|
|
|
|
/* Calculate in picosecs to yield more exact results */
|
|
tick_ps = gpmc_get_fclk_period();
|
|
|
|
return (time_ps + tick_ps - 1) / tick_ps;
|
|
}
|
|
|
|
unsigned int gpmc_ticks_to_ns(unsigned int ticks)
|
|
{
|
|
return ticks * gpmc_get_fclk_period() / 1000;
|
|
}
|
|
|
|
unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns)
|
|
{
|
|
unsigned long ticks = gpmc_ns_to_ticks(time_ns);
|
|
|
|
return ticks * gpmc_get_fclk_period() / 1000;
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
|
|
int time, const char *name)
|
|
#else
|
|
static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
|
|
int time)
|
|
#endif
|
|
{
|
|
u32 l;
|
|
int ticks, mask, nr_bits;
|
|
|
|
if (time == 0)
|
|
ticks = 0;
|
|
else
|
|
ticks = gpmc_ns_to_ticks(time);
|
|
nr_bits = end_bit - st_bit + 1;
|
|
if (ticks >= 1 << nr_bits) {
|
|
#ifdef DEBUG
|
|
printk(KERN_INFO "GPMC CS%d: %-10s* %3d ns, %3d ticks >= %d\n",
|
|
cs, name, time, ticks, 1 << nr_bits);
|
|
#endif
|
|
return -1;
|
|
}
|
|
|
|
mask = (1 << nr_bits) - 1;
|
|
l = gpmc_cs_read_reg(cs, reg);
|
|
#ifdef DEBUG
|
|
printk(KERN_INFO
|
|
"GPMC CS%d: %-10s: %3d ticks, %3lu ns (was %3i ticks) %3d ns\n",
|
|
cs, name, ticks, gpmc_get_fclk_period() * ticks / 1000,
|
|
(l >> st_bit) & mask, time);
|
|
#endif
|
|
l &= ~(mask << st_bit);
|
|
l |= ticks << st_bit;
|
|
gpmc_cs_write_reg(cs, reg, l);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
#define GPMC_SET_ONE(reg, st, end, field) \
|
|
if (set_gpmc_timing_reg(cs, (reg), (st), (end), \
|
|
t->field, #field) < 0) \
|
|
return -1
|
|
#else
|
|
#define GPMC_SET_ONE(reg, st, end, field) \
|
|
if (set_gpmc_timing_reg(cs, (reg), (st), (end), t->field) < 0) \
|
|
return -1
|
|
#endif
|
|
|
|
int gpmc_cs_calc_divider(int cs, unsigned int sync_clk)
|
|
{
|
|
int div;
|
|
u32 l;
|
|
|
|
l = sync_clk + (gpmc_get_fclk_period() - 1);
|
|
div = l / gpmc_get_fclk_period();
|
|
if (div > 4)
|
|
return -1;
|
|
if (div <= 0)
|
|
div = 1;
|
|
|
|
return div;
|
|
}
|
|
|
|
int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
|
|
{
|
|
int div;
|
|
u32 l;
|
|
|
|
div = gpmc_cs_calc_divider(cs, t->sync_clk);
|
|
if (div < 0)
|
|
return -1;
|
|
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG2, 0, 3, cs_on);
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG2, 8, 12, cs_rd_off);
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG2, 16, 20, cs_wr_off);
|
|
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG3, 0, 3, adv_on);
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG3, 8, 12, adv_rd_off);
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG3, 16, 20, adv_wr_off);
|
|
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG4, 0, 3, oe_on);
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG4, 8, 12, oe_off);
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG4, 16, 19, we_on);
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG4, 24, 28, we_off);
|
|
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG5, 0, 4, rd_cycle);
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG5, 8, 12, wr_cycle);
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG5, 16, 20, access);
|
|
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access);
|
|
|
|
if (cpu_is_omap34xx()) {
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus);
|
|
GPMC_SET_ONE(GPMC_CS_CONFIG6, 24, 28, wr_access);
|
|
}
|
|
|
|
/* caller is expected to have initialized CONFIG1 to cover
|
|
* at least sync vs async
|
|
*/
|
|
l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
|
|
if (l & (GPMC_CONFIG1_READTYPE_SYNC | GPMC_CONFIG1_WRITETYPE_SYNC)) {
|
|
#ifdef DEBUG
|
|
printk(KERN_INFO "GPMC CS%d CLK period is %lu ns (div %d)\n",
|
|
cs, (div * gpmc_get_fclk_period()) / 1000, div);
|
|
#endif
|
|
l &= ~0x03;
|
|
l |= (div - 1);
|
|
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, l);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void gpmc_cs_enable_mem(int cs, u32 base, u32 size)
|
|
{
|
|
u32 l;
|
|
u32 mask;
|
|
|
|
mask = (1 << GPMC_SECTION_SHIFT) - size;
|
|
l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
|
|
l &= ~0x3f;
|
|
l = (base >> GPMC_CHUNK_SHIFT) & 0x3f;
|
|
l &= ~(0x0f << 8);
|
|
l |= ((mask >> GPMC_CHUNK_SHIFT) & 0x0f) << 8;
|
|
l |= GPMC_CONFIG7_CSVALID;
|
|
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
|
|
}
|
|
|
|
static void gpmc_cs_disable_mem(int cs)
|
|
{
|
|
u32 l;
|
|
|
|
l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
|
|
l &= ~GPMC_CONFIG7_CSVALID;
|
|
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
|
|
}
|
|
|
|
static void gpmc_cs_get_memconf(int cs, u32 *base, u32 *size)
|
|
{
|
|
u32 l;
|
|
u32 mask;
|
|
|
|
l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
|
|
*base = (l & 0x3f) << GPMC_CHUNK_SHIFT;
|
|
mask = (l >> 8) & 0x0f;
|
|
*size = (1 << GPMC_SECTION_SHIFT) - (mask << GPMC_CHUNK_SHIFT);
|
|
}
|
|
|
|
static int gpmc_cs_mem_enabled(int cs)
|
|
{
|
|
u32 l;
|
|
|
|
l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
|
|
return l & GPMC_CONFIG7_CSVALID;
|
|
}
|
|
|
|
int gpmc_cs_set_reserved(int cs, int reserved)
|
|
{
|
|
if (cs > GPMC_CS_NUM)
|
|
return -ENODEV;
|
|
|
|
gpmc_cs_map &= ~(1 << cs);
|
|
gpmc_cs_map |= (reserved ? 1 : 0) << cs;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int gpmc_cs_reserved(int cs)
|
|
{
|
|
if (cs > GPMC_CS_NUM)
|
|
return -ENODEV;
|
|
|
|
return gpmc_cs_map & (1 << cs);
|
|
}
|
|
|
|
static unsigned long gpmc_mem_align(unsigned long size)
|
|
{
|
|
int order;
|
|
|
|
size = (size - 1) >> (GPMC_CHUNK_SHIFT - 1);
|
|
order = GPMC_CHUNK_SHIFT - 1;
|
|
do {
|
|
size >>= 1;
|
|
order++;
|
|
} while (size);
|
|
size = 1 << order;
|
|
return size;
|
|
}
|
|
|
|
static int gpmc_cs_insert_mem(int cs, unsigned long base, unsigned long size)
|
|
{
|
|
struct resource *res = &gpmc_cs_mem[cs];
|
|
int r;
|
|
|
|
size = gpmc_mem_align(size);
|
|
spin_lock(&gpmc_mem_lock);
|
|
res->start = base;
|
|
res->end = base + size - 1;
|
|
r = request_resource(&gpmc_mem_root, res);
|
|
spin_unlock(&gpmc_mem_lock);
|
|
|
|
return r;
|
|
}
|
|
|
|
int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
|
|
{
|
|
struct resource *res = &gpmc_cs_mem[cs];
|
|
int r = -1;
|
|
|
|
if (cs > GPMC_CS_NUM)
|
|
return -ENODEV;
|
|
|
|
size = gpmc_mem_align(size);
|
|
if (size > (1 << GPMC_SECTION_SHIFT))
|
|
return -ENOMEM;
|
|
|
|
spin_lock(&gpmc_mem_lock);
|
|
if (gpmc_cs_reserved(cs)) {
|
|
r = -EBUSY;
|
|
goto out;
|
|
}
|
|
if (gpmc_cs_mem_enabled(cs))
|
|
r = adjust_resource(res, res->start & ~(size - 1), size);
|
|
if (r < 0)
|
|
r = allocate_resource(&gpmc_mem_root, res, size, 0, ~0,
|
|
size, NULL, NULL);
|
|
if (r < 0)
|
|
goto out;
|
|
|
|
gpmc_cs_enable_mem(cs, res->start, resource_size(res));
|
|
*base = res->start;
|
|
gpmc_cs_set_reserved(cs, 1);
|
|
out:
|
|
spin_unlock(&gpmc_mem_lock);
|
|
return r;
|
|
}
|
|
EXPORT_SYMBOL(gpmc_cs_request);
|
|
|
|
void gpmc_cs_free(int cs)
|
|
{
|
|
spin_lock(&gpmc_mem_lock);
|
|
if (cs >= GPMC_CS_NUM || cs < 0 || !gpmc_cs_reserved(cs)) {
|
|
printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs);
|
|
BUG();
|
|
spin_unlock(&gpmc_mem_lock);
|
|
return;
|
|
}
|
|
gpmc_cs_disable_mem(cs);
|
|
release_resource(&gpmc_cs_mem[cs]);
|
|
gpmc_cs_set_reserved(cs, 0);
|
|
spin_unlock(&gpmc_mem_lock);
|
|
}
|
|
EXPORT_SYMBOL(gpmc_cs_free);
|
|
|
|
/**
|
|
* gpmc_read_status - read access request to get the different gpmc status
|
|
* @cmd: command type
|
|
* @return status
|
|
*/
|
|
int gpmc_read_status(int cmd)
|
|
{
|
|
int status = -EINVAL;
|
|
u32 regval = 0;
|
|
|
|
switch (cmd) {
|
|
case GPMC_GET_IRQ_STATUS:
|
|
status = gpmc_read_reg(GPMC_IRQSTATUS);
|
|
break;
|
|
|
|
case GPMC_PREFETCH_FIFO_CNT:
|
|
regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
|
|
status = GPMC_PREFETCH_STATUS_FIFO_CNT(regval);
|
|
break;
|
|
|
|
case GPMC_PREFETCH_COUNT:
|
|
regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
|
|
status = GPMC_PREFETCH_STATUS_COUNT(regval);
|
|
break;
|
|
|
|
case GPMC_STATUS_BUFFER:
|
|
regval = gpmc_read_reg(GPMC_STATUS);
|
|
/* 1 : buffer is available to write */
|
|
status = regval & GPMC_STATUS_BUFF_EMPTY;
|
|
break;
|
|
|
|
default:
|
|
printk(KERN_ERR "gpmc_read_status: Not supported\n");
|
|
}
|
|
return status;
|
|
}
|
|
EXPORT_SYMBOL(gpmc_read_status);
|
|
|
|
/**
|
|
* gpmc_cs_configure - write request to configure gpmc
|
|
* @cs: chip select number
|
|
* @cmd: command type
|
|
* @wval: value to write
|
|
* @return status of the operation
|
|
*/
|
|
int gpmc_cs_configure(int cs, int cmd, int wval)
|
|
{
|
|
int err = 0;
|
|
u32 regval = 0;
|
|
|
|
switch (cmd) {
|
|
case GPMC_ENABLE_IRQ:
|
|
gpmc_write_reg(GPMC_IRQENABLE, wval);
|
|
break;
|
|
|
|
case GPMC_SET_IRQ_STATUS:
|
|
gpmc_write_reg(GPMC_IRQSTATUS, wval);
|
|
break;
|
|
|
|
case GPMC_CONFIG_WP:
|
|
regval = gpmc_read_reg(GPMC_CONFIG);
|
|
if (wval)
|
|
regval &= ~GPMC_CONFIG_WRITEPROTECT; /* WP is ON */
|
|
else
|
|
regval |= GPMC_CONFIG_WRITEPROTECT; /* WP is OFF */
|
|
gpmc_write_reg(GPMC_CONFIG, regval);
|
|
break;
|
|
|
|
case GPMC_CONFIG_RDY_BSY:
|
|
regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
|
|
if (wval)
|
|
regval |= WR_RD_PIN_MONITORING;
|
|
else
|
|
regval &= ~WR_RD_PIN_MONITORING;
|
|
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
|
|
break;
|
|
|
|
case GPMC_CONFIG_DEV_SIZE:
|
|
regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
|
|
|
|
/* clear 2 target bits */
|
|
regval &= ~GPMC_CONFIG1_DEVICESIZE(3);
|
|
|
|
/* set the proper value */
|
|
regval |= GPMC_CONFIG1_DEVICESIZE(wval);
|
|
|
|
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
|
|
break;
|
|
|
|
case GPMC_CONFIG_DEV_TYPE:
|
|
regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
|
|
regval |= GPMC_CONFIG1_DEVICETYPE(wval);
|
|
if (wval == GPMC_DEVICETYPE_NOR)
|
|
regval |= GPMC_CONFIG1_MUXADDDATA;
|
|
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
|
|
break;
|
|
|
|
default:
|
|
printk(KERN_ERR "gpmc_configure_cs: Not supported\n");
|
|
err = -EINVAL;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL(gpmc_cs_configure);
|
|
|
|
/**
|
|
* gpmc_nand_read - nand specific read access request
|
|
* @cs: chip select number
|
|
* @cmd: command type
|
|
*/
|
|
int gpmc_nand_read(int cs, int cmd)
|
|
{
|
|
int rval = -EINVAL;
|
|
|
|
switch (cmd) {
|
|
case GPMC_NAND_DATA:
|
|
rval = gpmc_cs_read_byte(cs, GPMC_CS_NAND_DATA);
|
|
break;
|
|
|
|
default:
|
|
printk(KERN_ERR "gpmc_read_nand_ctrl: Not supported\n");
|
|
}
|
|
return rval;
|
|
}
|
|
EXPORT_SYMBOL(gpmc_nand_read);
|
|
|
|
/**
|
|
* gpmc_nand_write - nand specific write request
|
|
* @cs: chip select number
|
|
* @cmd: command type
|
|
* @wval: value to write
|
|
*/
|
|
int gpmc_nand_write(int cs, int cmd, int wval)
|
|
{
|
|
int err = 0;
|
|
|
|
switch (cmd) {
|
|
case GPMC_NAND_COMMAND:
|
|
gpmc_cs_write_byte(cs, GPMC_CS_NAND_COMMAND, wval);
|
|
break;
|
|
|
|
case GPMC_NAND_ADDRESS:
|
|
gpmc_cs_write_byte(cs, GPMC_CS_NAND_ADDRESS, wval);
|
|
break;
|
|
|
|
case GPMC_NAND_DATA:
|
|
gpmc_cs_write_byte(cs, GPMC_CS_NAND_DATA, wval);
|
|
|
|
default:
|
|
printk(KERN_ERR "gpmc_write_nand_ctrl: Not supported\n");
|
|
err = -EINVAL;
|
|
}
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL(gpmc_nand_write);
|
|
|
|
|
|
|
|
/**
|
|
* gpmc_prefetch_enable - configures and starts prefetch transfer
|
|
* @cs: cs (chip select) number
|
|
* @fifo_th: fifo threshold to be used for read/ write
|
|
* @dma_mode: dma mode enable (1) or disable (0)
|
|
* @u32_count: number of bytes to be transferred
|
|
* @is_write: prefetch read(0) or write post(1) mode
|
|
*/
|
|
int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
|
|
unsigned int u32_count, int is_write)
|
|
{
|
|
|
|
if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX) {
|
|
pr_err("gpmc: fifo threshold is not supported\n");
|
|
return -1;
|
|
} else if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
|
|
/* Set the amount of bytes to be prefetched */
|
|
gpmc_write_reg(GPMC_PREFETCH_CONFIG2, u32_count);
|
|
|
|
/* Set dma/mpu mode, the prefetch read / post write and
|
|
* enable the engine. Set which cs is has requested for.
|
|
*/
|
|
gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) |
|
|
PREFETCH_FIFOTHRESHOLD(fifo_th) |
|
|
ENABLE_PREFETCH |
|
|
(dma_mode << DMA_MPU_MODE) |
|
|
(0x1 & is_write)));
|
|
|
|
/* Start the prefetch engine */
|
|
gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1);
|
|
} else {
|
|
return -EBUSY;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(gpmc_prefetch_enable);
|
|
|
|
/**
|
|
* gpmc_prefetch_reset - disables and stops the prefetch engine
|
|
*/
|
|
int gpmc_prefetch_reset(int cs)
|
|
{
|
|
u32 config1;
|
|
|
|
/* check if the same module/cs is trying to reset */
|
|
config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
|
|
if (((config1 >> CS_NUM_SHIFT) & 0x7) != cs)
|
|
return -EINVAL;
|
|
|
|
/* Stop the PFPW engine */
|
|
gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0);
|
|
|
|
/* Reset/disable the PFPW engine */
|
|
gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x0);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(gpmc_prefetch_reset);
|
|
|
|
static void __init gpmc_mem_init(void)
|
|
{
|
|
int cs;
|
|
unsigned long boot_rom_space = 0;
|
|
|
|
/* never allocate the first page, to facilitate bug detection;
|
|
* even if we didn't boot from ROM.
|
|
*/
|
|
boot_rom_space = BOOT_ROM_SPACE;
|
|
/* In apollon the CS0 is mapped as 0x0000 0000 */
|
|
if (machine_is_omap_apollon())
|
|
boot_rom_space = 0;
|
|
gpmc_mem_root.start = GPMC_MEM_START + boot_rom_space;
|
|
gpmc_mem_root.end = GPMC_MEM_END;
|
|
|
|
/* Reserve all regions that has been set up by bootloader */
|
|
for (cs = 0; cs < GPMC_CS_NUM; cs++) {
|
|
u32 base, size;
|
|
|
|
if (!gpmc_cs_mem_enabled(cs))
|
|
continue;
|
|
gpmc_cs_get_memconf(cs, &base, &size);
|
|
if (gpmc_cs_insert_mem(cs, base, size) < 0)
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
static int __init gpmc_init(void)
|
|
{
|
|
u32 l, irq;
|
|
int cs, ret = -EINVAL;
|
|
int gpmc_irq;
|
|
char *ck = NULL;
|
|
|
|
if (cpu_is_omap24xx()) {
|
|
ck = "core_l3_ck";
|
|
if (cpu_is_omap2420())
|
|
l = OMAP2420_GPMC_BASE;
|
|
else
|
|
l = OMAP34XX_GPMC_BASE;
|
|
gpmc_irq = INT_34XX_GPMC_IRQ;
|
|
} else if (cpu_is_omap34xx()) {
|
|
ck = "gpmc_fck";
|
|
l = OMAP34XX_GPMC_BASE;
|
|
gpmc_irq = INT_34XX_GPMC_IRQ;
|
|
} else if (cpu_is_omap44xx()) {
|
|
ck = "gpmc_ck";
|
|
l = OMAP44XX_GPMC_BASE;
|
|
gpmc_irq = OMAP44XX_IRQ_GPMC;
|
|
}
|
|
|
|
if (WARN_ON(!ck))
|
|
return ret;
|
|
|
|
gpmc_l3_clk = clk_get(NULL, ck);
|
|
if (IS_ERR(gpmc_l3_clk)) {
|
|
printk(KERN_ERR "Could not get GPMC clock %s\n", ck);
|
|
BUG();
|
|
}
|
|
|
|
gpmc_base = ioremap(l, SZ_4K);
|
|
if (!gpmc_base) {
|
|
clk_put(gpmc_l3_clk);
|
|
printk(KERN_ERR "Could not get GPMC register memory\n");
|
|
BUG();
|
|
}
|
|
|
|
clk_enable(gpmc_l3_clk);
|
|
|
|
l = gpmc_read_reg(GPMC_REVISION);
|
|
printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
|
|
/* Set smart idle mode and automatic L3 clock gating */
|
|
l = gpmc_read_reg(GPMC_SYSCONFIG);
|
|
l &= 0x03 << 3;
|
|
l |= (0x02 << 3) | (1 << 0);
|
|
gpmc_write_reg(GPMC_SYSCONFIG, l);
|
|
gpmc_mem_init();
|
|
|
|
/* initalize the irq_chained */
|
|
irq = OMAP_GPMC_IRQ_BASE;
|
|
for (cs = 0; cs < GPMC_CS_NUM; cs++) {
|
|
irq_set_chip_and_handler(irq, &dummy_irq_chip,
|
|
handle_simple_irq);
|
|
set_irq_flags(irq, IRQF_VALID);
|
|
irq++;
|
|
}
|
|
|
|
ret = request_irq(gpmc_irq, gpmc_handle_irq, IRQF_SHARED, "gpmc", NULL);
|
|
if (ret)
|
|
pr_err("gpmc: irq-%d could not claim: err %d\n",
|
|
gpmc_irq, ret);
|
|
return ret;
|
|
}
|
|
postcore_initcall(gpmc_init);
|
|
|
|
static irqreturn_t gpmc_handle_irq(int irq, void *dev)
|
|
{
|
|
u8 cs;
|
|
|
|
/* check cs to invoke the irq */
|
|
cs = ((gpmc_read_reg(GPMC_PREFETCH_CONFIG1)) >> CS_NUM_SHIFT) & 0x7;
|
|
if (OMAP_GPMC_IRQ_BASE+cs <= OMAP_GPMC_IRQ_END)
|
|
generic_handle_irq(OMAP_GPMC_IRQ_BASE+cs);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#ifdef CONFIG_ARCH_OMAP3
|
|
static struct omap3_gpmc_regs gpmc_context;
|
|
|
|
void omap3_gpmc_save_context(void)
|
|
{
|
|
int i;
|
|
|
|
gpmc_context.sysconfig = gpmc_read_reg(GPMC_SYSCONFIG);
|
|
gpmc_context.irqenable = gpmc_read_reg(GPMC_IRQENABLE);
|
|
gpmc_context.timeout_ctrl = gpmc_read_reg(GPMC_TIMEOUT_CONTROL);
|
|
gpmc_context.config = gpmc_read_reg(GPMC_CONFIG);
|
|
gpmc_context.prefetch_config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
|
|
gpmc_context.prefetch_config2 = gpmc_read_reg(GPMC_PREFETCH_CONFIG2);
|
|
gpmc_context.prefetch_control = gpmc_read_reg(GPMC_PREFETCH_CONTROL);
|
|
for (i = 0; i < GPMC_CS_NUM; i++) {
|
|
gpmc_context.cs_context[i].is_valid = gpmc_cs_mem_enabled(i);
|
|
if (gpmc_context.cs_context[i].is_valid) {
|
|
gpmc_context.cs_context[i].config1 =
|
|
gpmc_cs_read_reg(i, GPMC_CS_CONFIG1);
|
|
gpmc_context.cs_context[i].config2 =
|
|
gpmc_cs_read_reg(i, GPMC_CS_CONFIG2);
|
|
gpmc_context.cs_context[i].config3 =
|
|
gpmc_cs_read_reg(i, GPMC_CS_CONFIG3);
|
|
gpmc_context.cs_context[i].config4 =
|
|
gpmc_cs_read_reg(i, GPMC_CS_CONFIG4);
|
|
gpmc_context.cs_context[i].config5 =
|
|
gpmc_cs_read_reg(i, GPMC_CS_CONFIG5);
|
|
gpmc_context.cs_context[i].config6 =
|
|
gpmc_cs_read_reg(i, GPMC_CS_CONFIG6);
|
|
gpmc_context.cs_context[i].config7 =
|
|
gpmc_cs_read_reg(i, GPMC_CS_CONFIG7);
|
|
}
|
|
}
|
|
}
|
|
|
|
void omap3_gpmc_restore_context(void)
|
|
{
|
|
int i;
|
|
|
|
gpmc_write_reg(GPMC_SYSCONFIG, gpmc_context.sysconfig);
|
|
gpmc_write_reg(GPMC_IRQENABLE, gpmc_context.irqenable);
|
|
gpmc_write_reg(GPMC_TIMEOUT_CONTROL, gpmc_context.timeout_ctrl);
|
|
gpmc_write_reg(GPMC_CONFIG, gpmc_context.config);
|
|
gpmc_write_reg(GPMC_PREFETCH_CONFIG1, gpmc_context.prefetch_config1);
|
|
gpmc_write_reg(GPMC_PREFETCH_CONFIG2, gpmc_context.prefetch_config2);
|
|
gpmc_write_reg(GPMC_PREFETCH_CONTROL, gpmc_context.prefetch_control);
|
|
for (i = 0; i < GPMC_CS_NUM; i++) {
|
|
if (gpmc_context.cs_context[i].is_valid) {
|
|
gpmc_cs_write_reg(i, GPMC_CS_CONFIG1,
|
|
gpmc_context.cs_context[i].config1);
|
|
gpmc_cs_write_reg(i, GPMC_CS_CONFIG2,
|
|
gpmc_context.cs_context[i].config2);
|
|
gpmc_cs_write_reg(i, GPMC_CS_CONFIG3,
|
|
gpmc_context.cs_context[i].config3);
|
|
gpmc_cs_write_reg(i, GPMC_CS_CONFIG4,
|
|
gpmc_context.cs_context[i].config4);
|
|
gpmc_cs_write_reg(i, GPMC_CS_CONFIG5,
|
|
gpmc_context.cs_context[i].config5);
|
|
gpmc_cs_write_reg(i, GPMC_CS_CONFIG6,
|
|
gpmc_context.cs_context[i].config6);
|
|
gpmc_cs_write_reg(i, GPMC_CS_CONFIG7,
|
|
gpmc_context.cs_context[i].config7);
|
|
}
|
|
}
|
|
}
|
|
#endif /* CONFIG_ARCH_OMAP3 */
|
|
|
|
/**
|
|
* gpmc_enable_hwecc - enable hardware ecc functionality
|
|
* @cs: chip select number
|
|
* @mode: read/write mode
|
|
* @dev_width: device bus width(1 for x16, 0 for x8)
|
|
* @ecc_size: bytes for which ECC will be generated
|
|
*/
|
|
int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size)
|
|
{
|
|
unsigned int val;
|
|
|
|
/* check if ecc module is in used */
|
|
if (gpmc_ecc_used != -EINVAL)
|
|
return -EINVAL;
|
|
|
|
gpmc_ecc_used = cs;
|
|
|
|
/* clear ecc and enable bits */
|
|
gpmc_write_reg(GPMC_ECC_CONTROL,
|
|
GPMC_ECC_CTRL_ECCCLEAR |
|
|
GPMC_ECC_CTRL_ECCREG1);
|
|
|
|
/* program ecc and result sizes */
|
|
val = ((((ecc_size >> 1) - 1) << 22) | (0x0000000F));
|
|
gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, val);
|
|
|
|
switch (mode) {
|
|
case GPMC_ECC_READ:
|
|
case GPMC_ECC_WRITE:
|
|
gpmc_write_reg(GPMC_ECC_CONTROL,
|
|
GPMC_ECC_CTRL_ECCCLEAR |
|
|
GPMC_ECC_CTRL_ECCREG1);
|
|
break;
|
|
case GPMC_ECC_READSYN:
|
|
gpmc_write_reg(GPMC_ECC_CONTROL,
|
|
GPMC_ECC_CTRL_ECCCLEAR |
|
|
GPMC_ECC_CTRL_ECCDISABLE);
|
|
break;
|
|
default:
|
|
printk(KERN_INFO "Error: Unrecognized Mode[%d]!\n", mode);
|
|
break;
|
|
}
|
|
|
|
/* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */
|
|
val = (dev_width << 7) | (cs << 1) | (0x1);
|
|
gpmc_write_reg(GPMC_ECC_CONFIG, val);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpmc_enable_hwecc);
|
|
|
|
/**
|
|
* gpmc_calculate_ecc - generate non-inverted ecc bytes
|
|
* @cs: chip select number
|
|
* @dat: data pointer over which ecc is computed
|
|
* @ecc_code: ecc code buffer
|
|
*
|
|
* Using non-inverted ECC is considered ugly since writing a blank
|
|
* page (padding) will clear the ECC bytes. This is not a problem as long
|
|
* no one is trying to write data on the seemingly unused page. Reading
|
|
* an erased page will produce an ECC mismatch between generated and read
|
|
* ECC bytes that has to be dealt with separately.
|
|
*/
|
|
int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code)
|
|
{
|
|
unsigned int val = 0x0;
|
|
|
|
if (gpmc_ecc_used != cs)
|
|
return -EINVAL;
|
|
|
|
/* read ecc result */
|
|
val = gpmc_read_reg(GPMC_ECC1_RESULT);
|
|
*ecc_code++ = val; /* P128e, ..., P1e */
|
|
*ecc_code++ = val >> 16; /* P128o, ..., P1o */
|
|
/* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
|
|
*ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
|
|
|
|
gpmc_ecc_used = -EINVAL;
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpmc_calculate_ecc);
|