b6e075c3cb
This beats the heuristic that the connector is involved in what format should be output for cases where this fails. E.g. if there is a bridge that changes format between the encoder and the connector, or if some of the RGB pins between the lcd controller and the encoder are not routed on the PCB. This is critical for the devices that have the "conflicting output formats" issue (SAM9N12, SAM9X5, SAMA5D3), since the most significant RGB bits move around depending on the selected output mode. For devices that do not have the "conflicting output formats" issue (SAMA5D2, SAMA5D4), this is completely irrelevant. Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180825085620.10566-5-peda@axentia.se |
||
|---|---|---|
| .. | ||
| Kconfig | ||
| Makefile | ||
| atmel_hlcdc_crtc.c | ||
| atmel_hlcdc_dc.c | ||
| atmel_hlcdc_dc.h | ||
| atmel_hlcdc_output.c | ||
| atmel_hlcdc_plane.c | ||