116 lines
2.8 KiB
C
116 lines
2.8 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Board setup routines for the Emerson/Artesyn MVME7100
|
|
*
|
|
* Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A.
|
|
*
|
|
* Author: Alessio Igor Bogani <alessio.bogani@elettra.eu>
|
|
*
|
|
* Based on earlier code by:
|
|
*
|
|
* Ajit Prem <ajit.prem@emerson.com>
|
|
* Copyright 2008 Emerson
|
|
*
|
|
* USB host fixup is borrowed by:
|
|
*
|
|
* Martyn Welch <martyn.welch@ge.com>
|
|
* Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
|
|
*/
|
|
|
|
#include <linux/pci.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/of_address.h>
|
|
#include <asm/udbg.h>
|
|
#include <asm/mpic.h>
|
|
#include <sysdev/fsl_soc.h>
|
|
#include <sysdev/fsl_pci.h>
|
|
|
|
#include "mpc86xx.h"
|
|
|
|
#define MVME7100_INTERRUPT_REG_2_OFFSET 0x05
|
|
#define MVME7100_DS1375_MASK 0x40
|
|
#define MVME7100_MAX6649_MASK 0x20
|
|
#define MVME7100_ABORT_MASK 0x10
|
|
|
|
/*
|
|
* Setup the architecture
|
|
*/
|
|
static void __init mvme7100_setup_arch(void)
|
|
{
|
|
struct device_node *bcsr_node;
|
|
void __iomem *mvme7100_regs = NULL;
|
|
u8 reg;
|
|
|
|
if (ppc_md.progress)
|
|
ppc_md.progress("mvme7100_setup_arch()", 0);
|
|
|
|
#ifdef CONFIG_SMP
|
|
mpc86xx_smp_init();
|
|
#endif
|
|
|
|
fsl_pci_assign_primary();
|
|
|
|
/* Remap BCSR registers */
|
|
bcsr_node = of_find_compatible_node(NULL, NULL,
|
|
"artesyn,mvme7100-bcsr");
|
|
if (bcsr_node) {
|
|
mvme7100_regs = of_iomap(bcsr_node, 0);
|
|
of_node_put(bcsr_node);
|
|
}
|
|
|
|
if (mvme7100_regs) {
|
|
/* Disable ds1375, max6649, and abort interrupts */
|
|
reg = readb(mvme7100_regs + MVME7100_INTERRUPT_REG_2_OFFSET);
|
|
reg |= MVME7100_DS1375_MASK | MVME7100_MAX6649_MASK
|
|
| MVME7100_ABORT_MASK;
|
|
writeb(reg, mvme7100_regs + MVME7100_INTERRUPT_REG_2_OFFSET);
|
|
} else
|
|
pr_warn("Unable to map board registers\n");
|
|
|
|
pr_info("MVME7100 board from Artesyn\n");
|
|
}
|
|
|
|
/*
|
|
* Called very early, device-tree isn't unflattened
|
|
*/
|
|
static int __init mvme7100_probe(void)
|
|
{
|
|
unsigned long root = of_get_flat_dt_root();
|
|
|
|
return of_flat_dt_is_compatible(root, "artesyn,MVME7100");
|
|
}
|
|
|
|
static void mvme7100_usb_host_fixup(struct pci_dev *pdev)
|
|
{
|
|
unsigned int val;
|
|
|
|
if (!machine_is(mvme7100))
|
|
return;
|
|
|
|
/* Ensure only ports 1 & 2 are enabled */
|
|
pci_read_config_dword(pdev, 0xe0, &val);
|
|
pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x2);
|
|
|
|
/* System clock is 48-MHz Oscillator and EHCI Enabled. */
|
|
pci_write_config_dword(pdev, 0xe4, 1 << 5);
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
|
|
mvme7100_usb_host_fixup);
|
|
|
|
machine_arch_initcall(mvme7100, mpc86xx_common_publish_devices);
|
|
|
|
define_machine(mvme7100) {
|
|
.name = "MVME7100",
|
|
.probe = mvme7100_probe,
|
|
.setup_arch = mvme7100_setup_arch,
|
|
.init_IRQ = mpc86xx_init_irq,
|
|
.get_irq = mpic_get_irq,
|
|
.time_init = mpc86xx_time_init,
|
|
.calibrate_decr = generic_calibrate_decr,
|
|
.progress = udbg_progress,
|
|
#ifdef CONFIG_PCI
|
|
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
|
|
#endif
|
|
};
|