874 lines
24 KiB
C
874 lines
24 KiB
C
/*
|
|
* HID driver for Sony / PS2 / PS3 BD devices.
|
|
*
|
|
* Copyright (c) 1999 Andreas Gal
|
|
* Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
|
|
* Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
|
|
* Copyright (c) 2008 Jiri Slaby
|
|
* Copyright (c) 2012 David Dillow <dave@thedillows.org>
|
|
* Copyright (c) 2006-2013 Jiri Kosina
|
|
* Copyright (c) 2013 Colin Leitner <colin.leitner@gmail.com>
|
|
*/
|
|
|
|
/*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the Free
|
|
* Software Foundation; either version 2 of the License, or (at your option)
|
|
* any later version.
|
|
*/
|
|
|
|
/* NOTE: in order for the Sony PS3 BD Remote Control to be found by
|
|
* a Bluetooth host, the key combination Start+Enter has to be kept pressed
|
|
* for about 7 seconds with the Bluetooth Host Controller in discovering mode.
|
|
*
|
|
* There will be no PIN request from the device.
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/hid.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/leds.h>
|
|
|
|
#include "hid-ids.h"
|
|
|
|
#define VAIO_RDESC_CONSTANT BIT(0)
|
|
#define SIXAXIS_CONTROLLER_USB BIT(1)
|
|
#define SIXAXIS_CONTROLLER_BT BIT(2)
|
|
#define BUZZ_CONTROLLER BIT(3)
|
|
#define PS3REMOTE BIT(4)
|
|
#define DUALSHOCK4_CONTROLLER_USB BIT(5)
|
|
#define DUALSHOCK4_CONTROLLER_BT BIT(6)
|
|
|
|
#define SONY_LED_SUPPORT (SIXAXIS_CONTROLLER_USB | BUZZ_CONTROLLER | DUALSHOCK4_CONTROLLER_USB)
|
|
|
|
#define MAX_LEDS 4
|
|
|
|
static const u8 sixaxis_rdesc_fixup[] = {
|
|
0x95, 0x13, 0x09, 0x01, 0x81, 0x02, 0x95, 0x0C,
|
|
0x81, 0x01, 0x75, 0x10, 0x95, 0x04, 0x26, 0xFF,
|
|
0x03, 0x46, 0xFF, 0x03, 0x09, 0x01, 0x81, 0x02
|
|
};
|
|
|
|
static const u8 sixaxis_rdesc_fixup2[] = {
|
|
0x05, 0x01, 0x09, 0x04, 0xa1, 0x01, 0xa1, 0x02,
|
|
0x85, 0x01, 0x75, 0x08, 0x95, 0x01, 0x15, 0x00,
|
|
0x26, 0xff, 0x00, 0x81, 0x03, 0x75, 0x01, 0x95,
|
|
0x13, 0x15, 0x00, 0x25, 0x01, 0x35, 0x00, 0x45,
|
|
0x01, 0x05, 0x09, 0x19, 0x01, 0x29, 0x13, 0x81,
|
|
0x02, 0x75, 0x01, 0x95, 0x0d, 0x06, 0x00, 0xff,
|
|
0x81, 0x03, 0x15, 0x00, 0x26, 0xff, 0x00, 0x05,
|
|
0x01, 0x09, 0x01, 0xa1, 0x00, 0x75, 0x08, 0x95,
|
|
0x04, 0x35, 0x00, 0x46, 0xff, 0x00, 0x09, 0x30,
|
|
0x09, 0x31, 0x09, 0x32, 0x09, 0x35, 0x81, 0x02,
|
|
0xc0, 0x05, 0x01, 0x95, 0x13, 0x09, 0x01, 0x81,
|
|
0x02, 0x95, 0x0c, 0x81, 0x01, 0x75, 0x10, 0x95,
|
|
0x04, 0x26, 0xff, 0x03, 0x46, 0xff, 0x03, 0x09,
|
|
0x01, 0x81, 0x02, 0xc0, 0xa1, 0x02, 0x85, 0x02,
|
|
0x75, 0x08, 0x95, 0x30, 0x09, 0x01, 0xb1, 0x02,
|
|
0xc0, 0xa1, 0x02, 0x85, 0xee, 0x75, 0x08, 0x95,
|
|
0x30, 0x09, 0x01, 0xb1, 0x02, 0xc0, 0xa1, 0x02,
|
|
0x85, 0xef, 0x75, 0x08, 0x95, 0x30, 0x09, 0x01,
|
|
0xb1, 0x02, 0xc0, 0xc0,
|
|
};
|
|
|
|
static __u8 ps3remote_rdesc[] = {
|
|
0x05, 0x01, /* GUsagePage Generic Desktop */
|
|
0x09, 0x05, /* LUsage 0x05 [Game Pad] */
|
|
0xA1, 0x01, /* MCollection Application (mouse, keyboard) */
|
|
|
|
/* Use collection 1 for joypad buttons */
|
|
0xA1, 0x02, /* MCollection Logical (interrelated data) */
|
|
|
|
/* Ignore the 1st byte, maybe it is used for a controller
|
|
* number but it's not needed for correct operation */
|
|
0x75, 0x08, /* GReportSize 0x08 [8] */
|
|
0x95, 0x01, /* GReportCount 0x01 [1] */
|
|
0x81, 0x01, /* MInput 0x01 (Const[0] Arr[1] Abs[2]) */
|
|
|
|
/* Bytes from 2nd to 4th are a bitmap for joypad buttons, for these
|
|
* buttons multiple keypresses are allowed */
|
|
0x05, 0x09, /* GUsagePage Button */
|
|
0x19, 0x01, /* LUsageMinimum 0x01 [Button 1 (primary/trigger)] */
|
|
0x29, 0x18, /* LUsageMaximum 0x18 [Button 24] */
|
|
0x14, /* GLogicalMinimum [0] */
|
|
0x25, 0x01, /* GLogicalMaximum 0x01 [1] */
|
|
0x75, 0x01, /* GReportSize 0x01 [1] */
|
|
0x95, 0x18, /* GReportCount 0x18 [24] */
|
|
0x81, 0x02, /* MInput 0x02 (Data[0] Var[1] Abs[2]) */
|
|
|
|
0xC0, /* MEndCollection */
|
|
|
|
/* Use collection 2 for remote control buttons */
|
|
0xA1, 0x02, /* MCollection Logical (interrelated data) */
|
|
|
|
/* 5th byte is used for remote control buttons */
|
|
0x05, 0x09, /* GUsagePage Button */
|
|
0x18, /* LUsageMinimum [No button pressed] */
|
|
0x29, 0xFE, /* LUsageMaximum 0xFE [Button 254] */
|
|
0x14, /* GLogicalMinimum [0] */
|
|
0x26, 0xFE, 0x00, /* GLogicalMaximum 0x00FE [254] */
|
|
0x75, 0x08, /* GReportSize 0x08 [8] */
|
|
0x95, 0x01, /* GReportCount 0x01 [1] */
|
|
0x80, /* MInput */
|
|
|
|
/* Ignore bytes from 6th to 11th, 6th to 10th are always constant at
|
|
* 0xff and 11th is for press indication */
|
|
0x75, 0x08, /* GReportSize 0x08 [8] */
|
|
0x95, 0x06, /* GReportCount 0x06 [6] */
|
|
0x81, 0x01, /* MInput 0x01 (Const[0] Arr[1] Abs[2]) */
|
|
|
|
/* 12th byte is for battery strength */
|
|
0x05, 0x06, /* GUsagePage Generic Device Controls */
|
|
0x09, 0x20, /* LUsage 0x20 [Battery Strength] */
|
|
0x14, /* GLogicalMinimum [0] */
|
|
0x25, 0x05, /* GLogicalMaximum 0x05 [5] */
|
|
0x75, 0x08, /* GReportSize 0x08 [8] */
|
|
0x95, 0x01, /* GReportCount 0x01 [1] */
|
|
0x81, 0x02, /* MInput 0x02 (Data[0] Var[1] Abs[2]) */
|
|
|
|
0xC0, /* MEndCollection */
|
|
|
|
0xC0 /* MEndCollection [Game Pad] */
|
|
};
|
|
|
|
static const unsigned int ps3remote_keymap_joypad_buttons[] = {
|
|
[0x01] = KEY_SELECT,
|
|
[0x02] = BTN_THUMBL, /* L3 */
|
|
[0x03] = BTN_THUMBR, /* R3 */
|
|
[0x04] = BTN_START,
|
|
[0x05] = KEY_UP,
|
|
[0x06] = KEY_RIGHT,
|
|
[0x07] = KEY_DOWN,
|
|
[0x08] = KEY_LEFT,
|
|
[0x09] = BTN_TL2, /* L2 */
|
|
[0x0a] = BTN_TR2, /* R2 */
|
|
[0x0b] = BTN_TL, /* L1 */
|
|
[0x0c] = BTN_TR, /* R1 */
|
|
[0x0d] = KEY_OPTION, /* options/triangle */
|
|
[0x0e] = KEY_BACK, /* back/circle */
|
|
[0x0f] = BTN_0, /* cross */
|
|
[0x10] = KEY_SCREEN, /* view/square */
|
|
[0x11] = KEY_HOMEPAGE, /* PS button */
|
|
[0x14] = KEY_ENTER,
|
|
};
|
|
static const unsigned int ps3remote_keymap_remote_buttons[] = {
|
|
[0x00] = KEY_1,
|
|
[0x01] = KEY_2,
|
|
[0x02] = KEY_3,
|
|
[0x03] = KEY_4,
|
|
[0x04] = KEY_5,
|
|
[0x05] = KEY_6,
|
|
[0x06] = KEY_7,
|
|
[0x07] = KEY_8,
|
|
[0x08] = KEY_9,
|
|
[0x09] = KEY_0,
|
|
[0x0e] = KEY_ESC, /* return */
|
|
[0x0f] = KEY_CLEAR,
|
|
[0x16] = KEY_EJECTCD,
|
|
[0x1a] = KEY_MENU, /* top menu */
|
|
[0x28] = KEY_TIME,
|
|
[0x30] = KEY_PREVIOUS,
|
|
[0x31] = KEY_NEXT,
|
|
[0x32] = KEY_PLAY,
|
|
[0x33] = KEY_REWIND, /* scan back */
|
|
[0x34] = KEY_FORWARD, /* scan forward */
|
|
[0x38] = KEY_STOP,
|
|
[0x39] = KEY_PAUSE,
|
|
[0x40] = KEY_CONTEXT_MENU, /* pop up/menu */
|
|
[0x60] = KEY_FRAMEBACK, /* slow/step back */
|
|
[0x61] = KEY_FRAMEFORWARD, /* slow/step forward */
|
|
[0x63] = KEY_SUBTITLE,
|
|
[0x64] = KEY_AUDIO,
|
|
[0x65] = KEY_ANGLE,
|
|
[0x70] = KEY_INFO, /* display */
|
|
[0x80] = KEY_BLUE,
|
|
[0x81] = KEY_RED,
|
|
[0x82] = KEY_GREEN,
|
|
[0x83] = KEY_YELLOW,
|
|
};
|
|
|
|
static const unsigned int buzz_keymap[] = {
|
|
/* The controller has 4 remote buzzers, each with one LED and 5
|
|
* buttons.
|
|
*
|
|
* We use the mapping chosen by the controller, which is:
|
|
*
|
|
* Key Offset
|
|
* -------------------
|
|
* Buzz 1
|
|
* Blue 5
|
|
* Orange 4
|
|
* Green 3
|
|
* Yellow 2
|
|
*
|
|
* So, for example, the orange button on the third buzzer is mapped to
|
|
* BTN_TRIGGER_HAPPY14
|
|
*/
|
|
[ 1] = BTN_TRIGGER_HAPPY1,
|
|
[ 2] = BTN_TRIGGER_HAPPY2,
|
|
[ 3] = BTN_TRIGGER_HAPPY3,
|
|
[ 4] = BTN_TRIGGER_HAPPY4,
|
|
[ 5] = BTN_TRIGGER_HAPPY5,
|
|
[ 6] = BTN_TRIGGER_HAPPY6,
|
|
[ 7] = BTN_TRIGGER_HAPPY7,
|
|
[ 8] = BTN_TRIGGER_HAPPY8,
|
|
[ 9] = BTN_TRIGGER_HAPPY9,
|
|
[10] = BTN_TRIGGER_HAPPY10,
|
|
[11] = BTN_TRIGGER_HAPPY11,
|
|
[12] = BTN_TRIGGER_HAPPY12,
|
|
[13] = BTN_TRIGGER_HAPPY13,
|
|
[14] = BTN_TRIGGER_HAPPY14,
|
|
[15] = BTN_TRIGGER_HAPPY15,
|
|
[16] = BTN_TRIGGER_HAPPY16,
|
|
[17] = BTN_TRIGGER_HAPPY17,
|
|
[18] = BTN_TRIGGER_HAPPY18,
|
|
[19] = BTN_TRIGGER_HAPPY19,
|
|
[20] = BTN_TRIGGER_HAPPY20,
|
|
};
|
|
|
|
struct sony_sc {
|
|
struct hid_device *hdev;
|
|
struct led_classdev *leds[MAX_LEDS];
|
|
unsigned long quirks;
|
|
struct work_struct state_worker;
|
|
|
|
#ifdef CONFIG_SONY_FF
|
|
__u8 left;
|
|
__u8 right;
|
|
#endif
|
|
|
|
__u8 led_state[MAX_LEDS];
|
|
__u8 led_count;
|
|
};
|
|
|
|
static __u8 *ps3remote_fixup(struct hid_device *hdev, __u8 *rdesc,
|
|
unsigned int *rsize)
|
|
{
|
|
*rsize = sizeof(ps3remote_rdesc);
|
|
return ps3remote_rdesc;
|
|
}
|
|
|
|
static int ps3remote_mapping(struct hid_device *hdev, struct hid_input *hi,
|
|
struct hid_field *field, struct hid_usage *usage,
|
|
unsigned long **bit, int *max)
|
|
{
|
|
unsigned int key = usage->hid & HID_USAGE;
|
|
|
|
if ((usage->hid & HID_USAGE_PAGE) != HID_UP_BUTTON)
|
|
return -1;
|
|
|
|
switch (usage->collection_index) {
|
|
case 1:
|
|
if (key >= ARRAY_SIZE(ps3remote_keymap_joypad_buttons))
|
|
return -1;
|
|
|
|
key = ps3remote_keymap_joypad_buttons[key];
|
|
if (!key)
|
|
return -1;
|
|
break;
|
|
case 2:
|
|
if (key >= ARRAY_SIZE(ps3remote_keymap_remote_buttons))
|
|
return -1;
|
|
|
|
key = ps3remote_keymap_remote_buttons[key];
|
|
if (!key)
|
|
return -1;
|
|
break;
|
|
default:
|
|
return -1;
|
|
}
|
|
|
|
hid_map_usage_clear(hi, usage, bit, max, EV_KEY, key);
|
|
return 1;
|
|
}
|
|
|
|
|
|
/* Sony Vaio VGX has wrongly mouse pointer declared as constant */
|
|
static __u8 *sony_report_fixup(struct hid_device *hdev, __u8 *rdesc,
|
|
unsigned int *rsize)
|
|
{
|
|
struct sony_sc *sc = hid_get_drvdata(hdev);
|
|
|
|
/*
|
|
* Some Sony RF receivers wrongly declare the mouse pointer as a
|
|
* a constant non-data variable.
|
|
*/
|
|
if ((sc->quirks & VAIO_RDESC_CONSTANT) && *rsize >= 56 &&
|
|
/* usage page: generic desktop controls */
|
|
/* rdesc[0] == 0x05 && rdesc[1] == 0x01 && */
|
|
/* usage: mouse */
|
|
rdesc[2] == 0x09 && rdesc[3] == 0x02 &&
|
|
/* input (usage page for x,y axes): constant, variable, relative */
|
|
rdesc[54] == 0x81 && rdesc[55] == 0x07) {
|
|
hid_info(hdev, "Fixing up Sony RF Receiver report descriptor\n");
|
|
/* input: data, variable, relative */
|
|
rdesc[55] = 0x06;
|
|
}
|
|
|
|
/* The HID descriptor exposed over BT has a trailing zero byte */
|
|
if ((((sc->quirks & SIXAXIS_CONTROLLER_USB) && *rsize == 148) ||
|
|
((sc->quirks & SIXAXIS_CONTROLLER_BT) && *rsize == 149)) &&
|
|
rdesc[83] == 0x75) {
|
|
hid_info(hdev, "Fixing up Sony Sixaxis report descriptor\n");
|
|
memcpy((void *)&rdesc[83], (void *)&sixaxis_rdesc_fixup,
|
|
sizeof(sixaxis_rdesc_fixup));
|
|
} else if (sc->quirks & SIXAXIS_CONTROLLER_USB &&
|
|
*rsize > sizeof(sixaxis_rdesc_fixup2)) {
|
|
hid_info(hdev, "Sony Sixaxis clone detected. Using original report descriptor (size: %d clone; %d new)\n",
|
|
*rsize, (int)sizeof(sixaxis_rdesc_fixup2));
|
|
*rsize = sizeof(sixaxis_rdesc_fixup2);
|
|
memcpy(rdesc, &sixaxis_rdesc_fixup2, *rsize);
|
|
}
|
|
|
|
if (sc->quirks & PS3REMOTE)
|
|
return ps3remote_fixup(hdev, rdesc, rsize);
|
|
|
|
return rdesc;
|
|
}
|
|
|
|
static int sony_raw_event(struct hid_device *hdev, struct hid_report *report,
|
|
__u8 *rd, int size)
|
|
{
|
|
struct sony_sc *sc = hid_get_drvdata(hdev);
|
|
|
|
/* Sixaxis HID report has acclerometers/gyro with MSByte first, this
|
|
* has to be BYTE_SWAPPED before passing up to joystick interface
|
|
*/
|
|
if ((sc->quirks & (SIXAXIS_CONTROLLER_USB | SIXAXIS_CONTROLLER_BT)) &&
|
|
rd[0] == 0x01 && size == 49) {
|
|
swap(rd[41], rd[42]);
|
|
swap(rd[43], rd[44]);
|
|
swap(rd[45], rd[46]);
|
|
swap(rd[47], rd[48]);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sony_mapping(struct hid_device *hdev, struct hid_input *hi,
|
|
struct hid_field *field, struct hid_usage *usage,
|
|
unsigned long **bit, int *max)
|
|
{
|
|
struct sony_sc *sc = hid_get_drvdata(hdev);
|
|
|
|
if (sc->quirks & BUZZ_CONTROLLER) {
|
|
unsigned int key = usage->hid & HID_USAGE;
|
|
|
|
if ((usage->hid & HID_USAGE_PAGE) != HID_UP_BUTTON)
|
|
return -1;
|
|
|
|
switch (usage->collection_index) {
|
|
case 1:
|
|
if (key >= ARRAY_SIZE(buzz_keymap))
|
|
return -1;
|
|
|
|
key = buzz_keymap[key];
|
|
if (!key)
|
|
return -1;
|
|
break;
|
|
default:
|
|
return -1;
|
|
}
|
|
|
|
hid_map_usage_clear(hi, usage, bit, max, EV_KEY, key);
|
|
return 1;
|
|
}
|
|
|
|
if (sc->quirks & PS3REMOTE)
|
|
return ps3remote_mapping(hdev, hi, field, usage, bit, max);
|
|
|
|
/* Let hid-core decide for the others */
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The Sony Sixaxis does not handle HID Output Reports on the Interrupt EP
|
|
* like it should according to usbhid/hid-core.c::usbhid_output_raw_report()
|
|
* so we need to override that forcing HID Output Reports on the Control EP.
|
|
*
|
|
* There is also another issue about HID Output Reports via USB, the Sixaxis
|
|
* does not want the report_id as part of the data packet, so we have to
|
|
* discard buf[0] when sending the actual control message, even for numbered
|
|
* reports, humpf!
|
|
*/
|
|
static int sixaxis_usb_output_raw_report(struct hid_device *hid, __u8 *buf,
|
|
size_t count, unsigned char report_type)
|
|
{
|
|
struct usb_interface *intf = to_usb_interface(hid->dev.parent);
|
|
struct usb_device *dev = interface_to_usbdev(intf);
|
|
struct usb_host_interface *interface = intf->cur_altsetting;
|
|
int report_id = buf[0];
|
|
int ret;
|
|
|
|
if (report_type == HID_OUTPUT_REPORT) {
|
|
/* Don't send the Report ID */
|
|
buf++;
|
|
count--;
|
|
}
|
|
|
|
ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
|
|
HID_REQ_SET_REPORT,
|
|
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
|
|
((report_type + 1) << 8) | report_id,
|
|
interface->desc.bInterfaceNumber, buf, count,
|
|
USB_CTRL_SET_TIMEOUT);
|
|
|
|
/* Count also the Report ID, in case of an Output report. */
|
|
if (ret > 0 && report_type == HID_OUTPUT_REPORT)
|
|
ret++;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Sending HID_REQ_GET_REPORT changes the operation mode of the ps3 controller
|
|
* to "operational". Without this, the ps3 controller will not report any
|
|
* events.
|
|
*/
|
|
static int sixaxis_set_operational_usb(struct hid_device *hdev)
|
|
{
|
|
int ret;
|
|
char *buf = kmalloc(18, GFP_KERNEL);
|
|
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
ret = hdev->hid_get_raw_report(hdev, 0xf2, buf, 17, HID_FEATURE_REPORT);
|
|
|
|
if (ret < 0)
|
|
hid_err(hdev, "can't set operational mode\n");
|
|
|
|
kfree(buf);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sixaxis_set_operational_bt(struct hid_device *hdev)
|
|
{
|
|
unsigned char buf[] = { 0xf4, 0x42, 0x03, 0x00, 0x00 };
|
|
return hdev->hid_output_raw_report(hdev, buf, sizeof(buf), HID_FEATURE_REPORT);
|
|
}
|
|
|
|
static void buzz_set_leds(struct hid_device *hdev, const __u8 *leds)
|
|
{
|
|
struct list_head *report_list =
|
|
&hdev->report_enum[HID_OUTPUT_REPORT].report_list;
|
|
struct hid_report *report = list_entry(report_list->next,
|
|
struct hid_report, list);
|
|
__s32 *value = report->field[0]->value;
|
|
|
|
value[0] = 0x00;
|
|
value[1] = leds[0] ? 0xff : 0x00;
|
|
value[2] = leds[1] ? 0xff : 0x00;
|
|
value[3] = leds[2] ? 0xff : 0x00;
|
|
value[4] = leds[3] ? 0xff : 0x00;
|
|
value[5] = 0x00;
|
|
value[6] = 0x00;
|
|
hid_hw_request(hdev, report, HID_REQ_SET_REPORT);
|
|
}
|
|
|
|
static void sony_set_leds(struct hid_device *hdev, const __u8 *leds, int count)
|
|
{
|
|
struct sony_sc *drv_data = hid_get_drvdata(hdev);
|
|
int n;
|
|
|
|
BUG_ON(count > MAX_LEDS);
|
|
|
|
if (drv_data->quirks & BUZZ_CONTROLLER && count == 4) {
|
|
buzz_set_leds(hdev, leds);
|
|
} else if ((drv_data->quirks & SIXAXIS_CONTROLLER_USB) ||
|
|
(drv_data->quirks & DUALSHOCK4_CONTROLLER_USB)) {
|
|
for (n = 0; n < count; n++)
|
|
drv_data->led_state[n] = leds[n];
|
|
schedule_work(&drv_data->state_worker);
|
|
}
|
|
}
|
|
|
|
static void sony_led_set_brightness(struct led_classdev *led,
|
|
enum led_brightness value)
|
|
{
|
|
struct device *dev = led->dev->parent;
|
|
struct hid_device *hdev = container_of(dev, struct hid_device, dev);
|
|
struct sony_sc *drv_data;
|
|
|
|
int n;
|
|
|
|
drv_data = hid_get_drvdata(hdev);
|
|
if (!drv_data) {
|
|
hid_err(hdev, "No device data\n");
|
|
return;
|
|
}
|
|
|
|
for (n = 0; n < drv_data->led_count; n++) {
|
|
if (led == drv_data->leds[n]) {
|
|
if (value != drv_data->led_state[n]) {
|
|
drv_data->led_state[n] = value;
|
|
sony_set_leds(hdev, drv_data->led_state, drv_data->led_count);
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static enum led_brightness sony_led_get_brightness(struct led_classdev *led)
|
|
{
|
|
struct device *dev = led->dev->parent;
|
|
struct hid_device *hdev = container_of(dev, struct hid_device, dev);
|
|
struct sony_sc *drv_data;
|
|
|
|
int n;
|
|
int on = 0;
|
|
|
|
drv_data = hid_get_drvdata(hdev);
|
|
if (!drv_data) {
|
|
hid_err(hdev, "No device data\n");
|
|
return LED_OFF;
|
|
}
|
|
|
|
for (n = 0; n < drv_data->led_count; n++) {
|
|
if (led == drv_data->leds[n]) {
|
|
on = !!(drv_data->led_state[n]);
|
|
break;
|
|
}
|
|
}
|
|
|
|
return on ? LED_FULL : LED_OFF;
|
|
}
|
|
|
|
static void sony_leds_remove(struct hid_device *hdev)
|
|
{
|
|
struct sony_sc *drv_data;
|
|
struct led_classdev *led;
|
|
int n;
|
|
|
|
drv_data = hid_get_drvdata(hdev);
|
|
BUG_ON(!(drv_data->quirks & SONY_LED_SUPPORT));
|
|
|
|
for (n = 0; n < drv_data->led_count; n++) {
|
|
led = drv_data->leds[n];
|
|
drv_data->leds[n] = NULL;
|
|
if (!led)
|
|
continue;
|
|
led_classdev_unregister(led);
|
|
kfree(led);
|
|
}
|
|
|
|
drv_data->led_count = 0;
|
|
}
|
|
|
|
static int sony_leds_init(struct hid_device *hdev)
|
|
{
|
|
struct sony_sc *drv_data;
|
|
int n, ret = 0;
|
|
int max_brightness;
|
|
struct led_classdev *led;
|
|
size_t name_sz;
|
|
char *name;
|
|
size_t name_len;
|
|
const char *name_fmt;
|
|
static const __u8 initial_values[MAX_LEDS] = { 0x00, 0x00, 0x00, 0x00 };
|
|
|
|
drv_data = hid_get_drvdata(hdev);
|
|
BUG_ON(!(drv_data->quirks & SONY_LED_SUPPORT));
|
|
|
|
if (drv_data->quirks & BUZZ_CONTROLLER) {
|
|
name_len = strlen("::buzz#");
|
|
name_fmt = "%s::buzz%d";
|
|
/* Validate expected report characteristics. */
|
|
if (!hid_validate_values(hdev, HID_OUTPUT_REPORT, 0, 0, 7))
|
|
return -ENODEV;
|
|
} else {
|
|
name_len = strlen("::sony#");
|
|
name_fmt = "%s::sony%d";
|
|
}
|
|
|
|
if (drv_data->quirks & DUALSHOCK4_CONTROLLER_USB) {
|
|
drv_data->led_count = 3;
|
|
max_brightness = 255;
|
|
} else {
|
|
drv_data->led_count = 4;
|
|
max_brightness = 1;
|
|
}
|
|
|
|
/* Clear LEDs as we have no way of reading their initial state. This is
|
|
* only relevant if the driver is loaded after somebody actively set the
|
|
* LEDs to on */
|
|
sony_set_leds(hdev, initial_values, drv_data->led_count);
|
|
|
|
name_sz = strlen(dev_name(&hdev->dev)) + name_len + 1;
|
|
|
|
for (n = 0; n < drv_data->led_count; n++) {
|
|
led = kzalloc(sizeof(struct led_classdev) + name_sz, GFP_KERNEL);
|
|
if (!led) {
|
|
hid_err(hdev, "Couldn't allocate memory for LED %d\n", n);
|
|
ret = -ENOMEM;
|
|
goto error_leds;
|
|
}
|
|
|
|
name = (void *)(&led[1]);
|
|
snprintf(name, name_sz, name_fmt, dev_name(&hdev->dev), n + 1);
|
|
led->name = name;
|
|
led->brightness = 0;
|
|
led->max_brightness = max_brightness;
|
|
led->brightness_get = sony_led_get_brightness;
|
|
led->brightness_set = sony_led_set_brightness;
|
|
|
|
ret = led_classdev_register(&hdev->dev, led);
|
|
if (ret) {
|
|
hid_err(hdev, "Failed to register LED %d\n", n);
|
|
kfree(led);
|
|
goto error_leds;
|
|
}
|
|
|
|
drv_data->leds[n] = led;
|
|
}
|
|
|
|
return ret;
|
|
|
|
error_leds:
|
|
sony_leds_remove(hdev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void sixaxis_state_worker(struct work_struct *work)
|
|
{
|
|
struct sony_sc *sc = container_of(work, struct sony_sc, state_worker);
|
|
unsigned char buf[] = {
|
|
0x01,
|
|
0x00, 0xff, 0x00, 0xff, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0xff, 0x27, 0x10, 0x00, 0x32,
|
|
0xff, 0x27, 0x10, 0x00, 0x32,
|
|
0xff, 0x27, 0x10, 0x00, 0x32,
|
|
0xff, 0x27, 0x10, 0x00, 0x32,
|
|
0x00, 0x00, 0x00, 0x00, 0x00
|
|
};
|
|
|
|
#ifdef CONFIG_SONY_FF
|
|
buf[3] = sc->right ? 1 : 0;
|
|
buf[5] = sc->left;
|
|
#endif
|
|
|
|
buf[10] |= sc->led_state[0] << 1;
|
|
buf[10] |= sc->led_state[1] << 2;
|
|
buf[10] |= sc->led_state[2] << 3;
|
|
buf[10] |= sc->led_state[3] << 4;
|
|
|
|
sc->hdev->hid_output_raw_report(sc->hdev, buf, sizeof(buf),
|
|
HID_OUTPUT_REPORT);
|
|
}
|
|
|
|
static void dualshock4_state_worker(struct work_struct *work)
|
|
{
|
|
struct sony_sc *sc = container_of(work, struct sony_sc, state_worker);
|
|
struct hid_device *hdev = sc->hdev;
|
|
struct list_head *head, *list;
|
|
struct hid_report *report;
|
|
__s32 *value;
|
|
|
|
list = &hdev->report_enum[HID_OUTPUT_REPORT].report_list;
|
|
|
|
list_for_each(head, list) {
|
|
report = list_entry(head, struct hid_report, list);
|
|
|
|
/* Report 5 is used to send data to the controller via USB */
|
|
if ((sc->quirks & DUALSHOCK4_CONTROLLER_USB) && report->id == 5)
|
|
break;
|
|
}
|
|
|
|
if (head == list) {
|
|
hid_err(hdev, "Dualshock 4 output report not found\n");
|
|
return;
|
|
}
|
|
|
|
value = report->field[0]->value;
|
|
value[0] = 0x03;
|
|
|
|
#ifdef CONFIG_SONY_FF
|
|
value[3] = sc->right;
|
|
value[4] = sc->left;
|
|
#endif
|
|
|
|
value[5] = sc->led_state[0];
|
|
value[6] = sc->led_state[1];
|
|
value[7] = sc->led_state[2];
|
|
|
|
hid_hw_request(hdev, report, HID_REQ_SET_REPORT);
|
|
}
|
|
|
|
#ifdef CONFIG_SONY_FF
|
|
static int sony_play_effect(struct input_dev *dev, void *data,
|
|
struct ff_effect *effect)
|
|
{
|
|
struct hid_device *hid = input_get_drvdata(dev);
|
|
struct sony_sc *sc = hid_get_drvdata(hid);
|
|
|
|
if (effect->type != FF_RUMBLE)
|
|
return 0;
|
|
|
|
sc->left = effect->u.rumble.strong_magnitude / 256;
|
|
sc->right = effect->u.rumble.weak_magnitude / 256;
|
|
|
|
schedule_work(&sc->state_worker);
|
|
return 0;
|
|
}
|
|
|
|
static int sony_init_ff(struct hid_device *hdev)
|
|
{
|
|
struct hid_input *hidinput = list_entry(hdev->inputs.next,
|
|
struct hid_input, list);
|
|
struct input_dev *input_dev = hidinput->input;
|
|
|
|
input_set_capability(input_dev, EV_FF, FF_RUMBLE);
|
|
return input_ff_create_memless(input_dev, NULL, sony_play_effect);
|
|
}
|
|
|
|
static void sony_destroy_ff(struct hid_device *hdev)
|
|
{
|
|
struct sony_sc *sc = hid_get_drvdata(hdev);
|
|
|
|
cancel_work_sync(&sc->state_worker);
|
|
}
|
|
|
|
#else
|
|
static int sony_init_ff(struct hid_device *hdev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void sony_destroy_ff(struct hid_device *hdev)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
|
|
{
|
|
int ret;
|
|
unsigned long quirks = id->driver_data;
|
|
struct sony_sc *sc;
|
|
unsigned int connect_mask = HID_CONNECT_DEFAULT;
|
|
|
|
sc = devm_kzalloc(&hdev->dev, sizeof(*sc), GFP_KERNEL);
|
|
if (sc == NULL) {
|
|
hid_err(hdev, "can't alloc sony descriptor\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
sc->quirks = quirks;
|
|
hid_set_drvdata(hdev, sc);
|
|
sc->hdev = hdev;
|
|
|
|
ret = hid_parse(hdev);
|
|
if (ret) {
|
|
hid_err(hdev, "parse failed\n");
|
|
return ret;
|
|
}
|
|
|
|
if (sc->quirks & VAIO_RDESC_CONSTANT)
|
|
connect_mask |= HID_CONNECT_HIDDEV_FORCE;
|
|
else if (sc->quirks & SIXAXIS_CONTROLLER_USB)
|
|
connect_mask |= HID_CONNECT_HIDDEV_FORCE;
|
|
else if (sc->quirks & SIXAXIS_CONTROLLER_BT)
|
|
connect_mask |= HID_CONNECT_HIDDEV_FORCE;
|
|
|
|
ret = hid_hw_start(hdev, connect_mask);
|
|
if (ret) {
|
|
hid_err(hdev, "hw start failed\n");
|
|
return ret;
|
|
}
|
|
|
|
if (sc->quirks & SIXAXIS_CONTROLLER_USB) {
|
|
hdev->hid_output_raw_report = sixaxis_usb_output_raw_report;
|
|
ret = sixaxis_set_operational_usb(hdev);
|
|
INIT_WORK(&sc->state_worker, sixaxis_state_worker);
|
|
}
|
|
else if (sc->quirks & SIXAXIS_CONTROLLER_BT)
|
|
ret = sixaxis_set_operational_bt(hdev);
|
|
else if (sc->quirks & DUALSHOCK4_CONTROLLER_USB) {
|
|
ret = 0;
|
|
INIT_WORK(&sc->state_worker, dualshock4_state_worker);
|
|
} else {
|
|
ret = 0;
|
|
}
|
|
|
|
if (ret < 0)
|
|
goto err_stop;
|
|
|
|
if (sc->quirks & SONY_LED_SUPPORT) {
|
|
ret = sony_leds_init(hdev);
|
|
if (ret < 0)
|
|
goto err_stop;
|
|
}
|
|
|
|
ret = sony_init_ff(hdev);
|
|
if (ret < 0)
|
|
goto err_stop;
|
|
|
|
return 0;
|
|
err_stop:
|
|
if (sc->quirks & SONY_LED_SUPPORT)
|
|
sony_leds_remove(hdev);
|
|
hid_hw_stop(hdev);
|
|
return ret;
|
|
}
|
|
|
|
static void sony_remove(struct hid_device *hdev)
|
|
{
|
|
struct sony_sc *sc = hid_get_drvdata(hdev);
|
|
|
|
if (sc->quirks & SONY_LED_SUPPORT)
|
|
sony_leds_remove(hdev);
|
|
|
|
sony_destroy_ff(hdev);
|
|
|
|
hid_hw_stop(hdev);
|
|
}
|
|
|
|
static const struct hid_device_id sony_devices[] = {
|
|
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER),
|
|
.driver_data = SIXAXIS_CONTROLLER_USB },
|
|
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_NAVIGATION_CONTROLLER),
|
|
.driver_data = SIXAXIS_CONTROLLER_USB },
|
|
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER),
|
|
.driver_data = SIXAXIS_CONTROLLER_BT },
|
|
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE),
|
|
.driver_data = VAIO_RDESC_CONSTANT },
|
|
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGP_MOUSE),
|
|
.driver_data = VAIO_RDESC_CONSTANT },
|
|
/* Wired Buzz Controller. Reported as Sony Hub from its USB ID and as
|
|
* Logitech joystick from the device descriptor. */
|
|
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_BUZZ_CONTROLLER),
|
|
.driver_data = BUZZ_CONTROLLER },
|
|
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_WIRELESS_BUZZ_CONTROLLER),
|
|
.driver_data = BUZZ_CONTROLLER },
|
|
/* PS3 BD Remote Control */
|
|
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_BDREMOTE),
|
|
.driver_data = PS3REMOTE },
|
|
/* Logitech Harmony Adapter for PS3 */
|
|
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_PS3),
|
|
.driver_data = PS3REMOTE },
|
|
/* Sony Dualshock 4 controllers for PS4 */
|
|
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER),
|
|
.driver_data = DUALSHOCK4_CONTROLLER_USB },
|
|
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER),
|
|
.driver_data = DUALSHOCK4_CONTROLLER_BT },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(hid, sony_devices);
|
|
|
|
static struct hid_driver sony_driver = {
|
|
.name = "sony",
|
|
.id_table = sony_devices,
|
|
.input_mapping = sony_mapping,
|
|
.probe = sony_probe,
|
|
.remove = sony_remove,
|
|
.report_fixup = sony_report_fixup,
|
|
.raw_event = sony_raw_event
|
|
};
|
|
module_hid_driver(sony_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|